Documentation/ABI/testing/sysfs-class-fpga-manager

   1 What:           /sys/class/fpga_manager/<fpga>/name
   2 Date:           August 2015
   3 KernelVersion:  4.3
   4 Contact:        Alan Tull <atull@opensource.altera.com>
   5 Description:    Name of low level fpga manager driver.
   6
   7 What:           /sys/class/fpga_manager/<fpga>/state
   8 Date:           August 2015
   9 KernelVersion:  4.3
  10 Contact:        Alan Tull <atull@opensource.altera.com>
  11 Description:    Read fpga manager state as a string.
  12                 The intent is to provide enough detail that if something goes
  13                 wrong during FPGA programming (something that the driver can't
  14                 fix) then userspace can know, i.e. if the firmware request
  15                 fails, that could be due to not being able to find the firmware
  16                 file.
  17
  18                 This is a superset of FPGA states and fpga manager driver
  19                 states.  The fpga manager driver is walking through these steps
  20                 to get the FPGA into a known operating state.  It's a sequence,
  21                 though some steps may get skipped.  Valid FPGA states will vary
  22                 by manufacturer; this is a superset.
  23
  24                 * unknown               = can't determine state
  25                 * power off             = FPGA power is off
  26                 * power up              = FPGA reports power is up
  27                 * reset                 = FPGA held in reset state
  28                 * firmware request      = firmware class request in progress
  29                 * firmware request error = firmware request failed
  30                 * write init            = preparing FPGA for programming
  31                 * write init error      = Error while preparing FPGA for programming
  32                 * write                 = FPGA ready to receive image data
  33                 * write error           = Error while programming
  34                 * write complete        = Doing post programming steps
  35                 * write complete error  = Error while doing post programming
  36                 * operating             = FPGA is programmed and operating
  37
  38 What:           /sys/class/fpga_manager/<fpga>/status
  39 Date:           June 2018
  40 KernelVersion:  4.19
  41 Contact:        Wu Hao <hao.wu@intel.com>
  42 Description:    Read fpga manager status as a string.
  43                 If FPGA programming operation fails, it could be caused by crc
  44                 error or incompatible bitstream image. The intent of this
  45                 interface is to provide more detailed information for FPGA
  46                 programming errors to userspace. This is a list of strings for
  47                 the supported status.
  48
  49                 * reconfig operation error      - invalid operations detected by
  50                                                   reconfiguration hardware.
  51                                                   e.g. start reconfiguration
  52                                                   with errors not cleared
  53                 * reconfig CRC error            - CRC error detected by
  54                                                   reconfiguration hardware.
  55                 * reconfig incompatible image   - reconfiguration image is
  56                                                   incompatible with hardware
  57                 * reconfig IP protocol error    - protocol errors detected by
  58                                                   reconfiguration hardware
  59                 * reconfig fifo overflow error  - FIFO overflow detected by
  60                                                   reconfiguration hardware