Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
[linux-2.6-microblaze.git] / Documentation / ABI / testing / sysfs-bus-thunderbolt
1 What:           /sys/bus/thunderbolt/devices/.../domainX/boot_acl
2 Date:           Jun 2018
3 KernelVersion:  4.17
4 Contact:        thunderbolt-software@lists.01.org
5 Description:    Holds a comma separated list of device unique_ids that
6                 are allowed to be connected automatically during system
7                 startup (e.g boot devices). The list always contains
8                 maximum supported number of unique_ids where unused
9                 entries are empty. This allows the userspace software
10                 to determine how many entries the controller supports.
11                 If there are multiple controllers, each controller has
12                 its own ACL list and size may be different between the
13                 controllers.
14
15                 System BIOS may have an option "Preboot ACL" or similar
16                 that needs to be selected before this list is taken into
17                 consideration.
18
19                 Software always updates a full list in each write.
20
21                 If a device is authorized automatically during boot its
22                 boot attribute is set to 1.
23
24 What:           /sys/bus/thunderbolt/devices/.../domainX/deauthorization
25 Date:           May 2021
26 KernelVersion:  5.12
27 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
28 Description:    This attribute tells whether the system supports
29                 de-authorization of devices. Value of 1 means user can
30                 de-authorize PCIe tunnel by writing 0 to authorized
31                 attribute under each device.
32
33 What:           /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
34 Date:           Mar 2019
35 KernelVersion:  4.21
36 Contact:        thunderbolt-software@lists.01.org
37 Description:    This attribute tells whether the system uses IOMMU
38                 for DMA protection. Value of 1 means IOMMU is used 0 means
39                 it is not (DMA protection is solely based on Thunderbolt
40                 security levels).
41
42 What:           /sys/bus/thunderbolt/devices/.../domainX/security
43 Date:           Sep 2017
44 KernelVersion:  4.13
45 Contact:        thunderbolt-software@lists.01.org
46 Description:    This attribute holds current Thunderbolt security level
47                 set by the system BIOS. Possible values are:
48
49                 =======  ==================================================
50                 none     All devices are automatically authorized
51                 user     Devices are only authorized based on writing
52                          appropriate value to the authorized attribute
53                 secure   Require devices that support secure connect at
54                          minimum. User needs to authorize each device.
55                 dponly   Automatically tunnel Display port (and USB). No
56                          PCIe tunnels are created.
57                 usbonly  Automatically tunnel USB controller of the
58                          connected Thunderbolt dock (and Display Port). All
59                          PCIe links downstream of the dock are removed.
60                 nopcie   USB4 system where PCIe tunneling is disabled from
61                          the BIOS.
62                 =======  ==================================================
63
64 What:           /sys/bus/thunderbolt/devices/.../authorized
65 Date:           Sep 2017
66 KernelVersion:  4.13
67 Contact:        thunderbolt-software@lists.01.org
68 Description:    This attribute is used to authorize Thunderbolt devices
69                 after they have been connected. If the device is not
70                 authorized, no PCIe devices are available to the system.
71
72                 Contents of this attribute will be 0 when the device is not
73                 yet authorized.
74
75                 Possible values are supported:
76
77                 ==  ===================================================
78                 0   The device will be de-authorized (only supported if
79                     deauthorization attribute under domain contains 1)
80                 1   The device will be authorized and connected
81                 ==  ===================================================
82
83                 When key attribute contains 32 byte hex string the possible
84                 values are:
85
86                 ==  ========================================================
87                 0   The device will be de-authorized (only supported if
88                     deauthorization attribute under domain contains 1)
89                 1   The 32 byte hex string is added to the device NVM and
90                     the device is authorized.
91                 2   Send a challenge based on the 32 byte hex string. If the
92                     challenge response from device is valid, the device is
93                     authorized. In case of failure errno will be ENOKEY if
94                     the device did not contain a key at all, and
95                     EKEYREJECTED if the challenge response did not match.
96                 ==  ========================================================
97
98 What:           /sys/bus/thunderbolt/devices/.../boot
99 Date:           Jun 2018
100 KernelVersion:  4.17
101 Contact:        thunderbolt-software@lists.01.org
102 Description:    This attribute contains 1 if Thunderbolt device was already
103                 authorized on boot and 0 otherwise.
104
105 What:           /sys/bus/thunderbolt/devices/.../generation
106 Date:           Jan 2020
107 KernelVersion:  5.5
108 Contact:        Christian Kellner <christian@kellner.me>
109 Description:    This attribute contains the generation of the Thunderbolt
110                 controller associated with the device. It will contain 4
111                 for USB4.
112
113 What:           /sys/bus/thunderbolt/devices/.../key
114 Date:           Sep 2017
115 KernelVersion:  4.13
116 Contact:        thunderbolt-software@lists.01.org
117 Description:    When a devices supports Thunderbolt secure connect it will
118                 have this attribute. Writing 32 byte hex string changes
119                 authorization to use the secure connection method instead.
120                 Writing an empty string clears the key and regular connection
121                 method can be used again.
122
123 What:           /sys/bus/thunderbolt/devices/.../device
124 Date:           Sep 2017
125 KernelVersion:  4.13
126 Contact:        thunderbolt-software@lists.01.org
127 Description:    This attribute contains id of this device extracted from
128                 the device DROM.
129
130 What:           /sys/bus/thunderbolt/devices/.../device_name
131 Date:           Sep 2017
132 KernelVersion:  4.13
133 Contact:        thunderbolt-software@lists.01.org
134 Description:    This attribute contains name of this device extracted from
135                 the device DROM.
136
137 What:           /sys/bus/thunderbolt/devices/.../maxhopid
138 Date:           Jul 2021
139 KernelVersion:  5.13
140 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
141 Description:    Only set for XDomains. The maximum HopID the other host
142                 supports as its input HopID.
143
144 What:           /sys/bus/thunderbolt/devices/.../rx_speed
145 Date:           Jan 2020
146 KernelVersion:  5.5
147 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
148 Description:    This attribute reports the device RX speed per lane.
149                 All RX lanes run at the same speed.
150
151 What:           /sys/bus/thunderbolt/devices/.../rx_lanes
152 Date:           Jan 2020
153 KernelVersion:  5.5
154 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
155 Description:    This attribute reports number of RX lanes the device is
156                 using simultaneusly through its upstream port.
157
158 What:           /sys/bus/thunderbolt/devices/.../tx_speed
159 Date:           Jan 2020
160 KernelVersion:  5.5
161 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
162 Description:    This attribute reports the TX speed per lane.
163                 All TX lanes run at the same speed.
164
165 What:           /sys/bus/thunderbolt/devices/.../tx_lanes
166 Date:           Jan 2020
167 KernelVersion:  5.5
168 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
169 Description:    This attribute reports number of TX lanes the device is
170                 using simultaneusly through its upstream port.
171
172 What:           /sys/bus/thunderbolt/devices/.../vendor
173 Date:           Sep 2017
174 KernelVersion:  4.13
175 Contact:        thunderbolt-software@lists.01.org
176 Description:    This attribute contains vendor id of this device extracted
177                 from the device DROM.
178
179 What:           /sys/bus/thunderbolt/devices/.../vendor_name
180 Date:           Sep 2017
181 KernelVersion:  4.13
182 Contact:        thunderbolt-software@lists.01.org
183 Description:    This attribute contains vendor name of this device extracted
184                 from the device DROM.
185
186 What:           /sys/bus/thunderbolt/devices/.../unique_id
187 Date:           Sep 2017
188 KernelVersion:  4.13
189 Contact:        thunderbolt-software@lists.01.org
190 Description:    This attribute contains unique_id string of this device.
191                 This is either read from hardware registers (UUID on
192                 newer hardware) or based on UID from the device DROM.
193                 Can be used to uniquely identify particular device.
194
195 What:           /sys/bus/thunderbolt/devices/.../nvm_version
196 Date:           Sep 2017
197 KernelVersion:  4.13
198 Contact:        thunderbolt-software@lists.01.org
199 Description:    If the device has upgradeable firmware the version
200                 number is available here. Format: %x.%x, major.minor.
201                 If the device is in safe mode reading the file returns
202                 -ENODATA instead as the NVM version is not available.
203
204 What:           /sys/bus/thunderbolt/devices/.../nvm_authenticate
205 Date:           Sep 2017
206 KernelVersion:  4.13
207 Contact:        thunderbolt-software@lists.01.org
208 Description:    When new NVM image is written to the non-active NVM
209                 area (through non_activeX NVMem device), the
210                 authentication procedure is started by writing to
211                 this file.
212                 If everything goes well, the device is
213                 restarted with the new NVM firmware. If the image
214                 verification fails an error code is returned instead.
215
216                 This file will accept writing values "1", "2" or "3".
217
218                 - Writing "1" will flush the image to the storage
219                   area and authenticate the image in one action.
220                 - Writing "2" will run some basic validation on the image
221                   and flush it to the storage area.
222                 - Writing "3" will authenticate the image that is
223                   currently written in the storage area. This is only
224                   supported with USB4 devices and retimers.
225
226                 When read holds status of the last authentication
227                 operation if an error occurred during the process. This
228                 is directly the status value from the DMA configuration
229                 based mailbox before the device is power cycled. Writing
230                 0 here clears the status.
231
232 What:           /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
233 Date:           Oct 2020
234 KernelVersion:  v5.9
235 Contact:        Mario Limonciello <mario.limonciello@outlook.com>
236 Description:    For supported devices, automatically authenticate the new Thunderbolt
237                 image when the device is disconnected from the host system.
238
239                 This file will accept writing values "1" or "2"
240
241                 - Writing "1" will flush the image to the storage
242                   area and prepare the device for authentication on disconnect.
243                 - Writing "2" will run some basic validation on the image
244                   and flush it to the storage area.
245
246 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/key
247 Date:           Jan 2018
248 KernelVersion:  4.15
249 Contact:        thunderbolt-software@lists.01.org
250 Description:    This contains name of the property directory the XDomain
251                 service exposes. This entry describes the protocol in
252                 question. Following directories are already reserved by
253                 the Apple XDomain specification:
254
255                 ========  ===============================================
256                 network   IP/ethernet over Thunderbolt
257                 targetdm  Target disk mode protocol over Thunderbolt
258                 extdisp   External display mode protocol over Thunderbolt
259                 ========  ===============================================
260
261 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
262 Date:           Jan 2018
263 KernelVersion:  4.15
264 Contact:        thunderbolt-software@lists.01.org
265 Description:    Stores the same MODALIAS value emitted by uevent for
266                 the XDomain service. Format: tbtsvc:kSpNvNrN
267
268 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid
269 Date:           Jan 2018
270 KernelVersion:  4.15
271 Contact:        thunderbolt-software@lists.01.org
272 Description:    This contains XDomain protocol identifier the XDomain
273                 service supports.
274
275 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers
276 Date:           Jan 2018
277 KernelVersion:  4.15
278 Contact:        thunderbolt-software@lists.01.org
279 Description:    This contains XDomain protocol version the XDomain
280                 service supports.
281
282 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs
283 Date:           Jan 2018
284 KernelVersion:  4.15
285 Contact:        thunderbolt-software@lists.01.org
286 Description:    This contains XDomain software version the XDomain
287                 service supports.
288
289 What:           /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns
290 Date:           Jan 2018
291 KernelVersion:  4.15
292 Contact:        thunderbolt-software@lists.01.org
293 Description:    This contains XDomain service specific settings as
294                 bitmask. Format: %x
295
296 What:           /sys/bus/thunderbolt/devices/usb4_portX/link
297 Date:           Sep 2021
298 KernelVersion:  v5.14
299 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
300 Description:    Returns the current link mode. Possible values are
301                 "usb4", "tbt" and "none".
302
303 What:           /sys/bus/thunderbolt/devices/usb4_portX/offline
304 Date:           Sep 2021
305 KernelVersion:  v5.14
306 Contact:        Rajmohan Mani <rajmohan.mani@intel.com>
307 Description:    Writing 1 to this attribute puts the USB4 port into
308                 offline mode. Only allowed when there is nothing
309                 connected to the port (link attribute returns "none").
310                 Once the port is in offline mode it does not receive any
311                 hotplug events. This is used to update NVM firmware of
312                 on-board retimers. Writing 0 puts the port back to
313                 online mode.
314
315                 This attribute is only visible if the platform supports
316                 powering on retimers when there is no cable connected.
317
318 What:           /sys/bus/thunderbolt/devices/usb4_portX/rescan
319 Date:           Sep 2021
320 KernelVersion:  v5.14
321 Contact:        Rajmohan Mani <rajmohan.mani@intel.com>
322 Description:    When the USB4 port is in offline mode writing 1 to this
323                 attribute forces rescan of the sideband for on-board
324                 retimers. Each retimer appear under the USB4 port as if
325                 the USB4 link was up. These retimers act in the same way
326                 as if the cable was connected so upgrading their NVM
327                 firmware can be done the usual way.
328
329 What:           /sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
330 Date:           Oct 2020
331 KernelVersion:  v5.9
332 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
333 Description:    Retimer device identifier read from the hardware.
334
335 What:           /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate
336 Date:           Oct 2020
337 KernelVersion:  v5.9
338 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
339 Description:    When new NVM image is written to the non-active NVM
340                 area (through non_activeX NVMem device), the
341                 authentication procedure is started by writing 1 to
342                 this file. If everything goes well, the device is
343                 restarted with the new NVM firmware. If the image
344                 verification fails an error code is returned instead.
345
346                 When read holds status of the last authentication
347                 operation if an error occurred during the process.
348                 Format: %x.
349
350 What:           /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version
351 Date:           Oct 2020
352 KernelVersion:  v5.9
353 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
354 Description:    Holds retimer NVM version number. Format: %x.%x, major.minor.
355
356 What:           /sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor
357 Date:           Oct 2020
358 KernelVersion:  v5.9
359 Contact:        Mika Westerberg <mika.westerberg@linux.intel.com>
360 Description:    Retimer vendor identifier read from the hardware.