Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als

   1 What:           /sys/.../events/in_illuminance0_thresh_either_en
   2 Date:           April 2012
   3 KernelVersion:  3.5
   4 Contact:        Johan Hovold <jhovold@gmail.com>
   5 Description:
   6                 Event generated when channel passes one of the four thresholds
   7                 in each direction (rising|falling) and a zone change occurs.
   8                 The corresponding light zone can be read from
   9                 in_illuminance0_zone.
  10
  11 What:           /sys/.../events/in_illuminance0_threshY_hysteresis
  12 Date:           May 2012
  13 KernelVersion:  3.5
  14 Contact:        Johan Hovold <jhovold@gmail.com>
  15 Description:
  16                 Get the hysteresis for thresholds Y, that is,
  17                 threshY_hysteresis = threshY_raising - threshY_falling
  18
  19 What:           /sys/.../events/illuminance_threshY_falling_value
  20 What:           /sys/.../events/illuminance_threshY_raising_value
  21 Date:           April 2012
  22 KernelVersion:  3.5
  23 Contact:        Johan Hovold <jhovold@gmail.com>
  24 Description:
  25                 Specifies the value of threshold that the device is comparing
  26                 against for the events enabled by
  27                 in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
  28
  29                 Note that threshY_falling must be less than or equal to
  30                 threshY_raising.
  31
  32                 These thresholds correspond to the eight zone-boundary
  33                 registers (boundaryY_{low,high}) and define the five light
  34                 zones.
  35
  36 What:           /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
  37 Date:           April 2012
  38 KernelVersion:  3.5
  39 Contact:        Johan Hovold <jhovold@gmail.com>
  40 Description:
  41                 Get the current light zone (0..4) as defined by the
  42                 in_illuminance0_threshY_{falling,rising} thresholds.
  43
  44 What:           /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
  45 Date:           May 2012
  46 KernelVersion:  3.5
  47 Contact:        Johan Hovold <jhovold@gmail.com>
  48 Description:
  49                 Set the output current for channel out_currentY when in zone
  50                 Z (0..255), where Y in 0..2 and Z in 0..4.
  51
  52                 These values correspond to the ALS-mapper target registers for
  53                 ALS-mapper Y + 1.
  54
  55                 Note that out_currentY_raw provides the current for the
  56                 current zone.