| 2020-06-04 |
Matt Roper | drm/i915/rkl: Don't try to access transcoder D
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-06-04 |
Matt Roper | drm/i915/rkl: Setup ports/phys
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-06-04 |
Matt Roper | drm/i915/rkl: Handle comp master/slave relationships...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-06-04 |
Matt Roper | drm/i915/rkl: Add DDC pin mapping
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-06-04 |
Matt Roper | drm/i915/rkl: Set transcoder mask properly
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: RKL only uses PHY_MISC for PHY's A and B
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Add power well support
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Limit number of universal planes to 5
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Update memory bandwidth parameters
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | x86/gpu: add RKL stolen memory support
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Add PCH support
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Load DMC firmware for Rocket Lake
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Re-use TGL GuC/HuC firmware
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-20 |
Matt Roper | drm/i915/rkl: Add RKL platform info and PCI ids
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-05-05 |
Matt Roper | drm/i915/icp: Add Wa_14010685332
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-27 |
Matt Roper | drm/i915: Use proper fault mask in interrupt postinstall too
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-21 |
Matt Roper | drm/i915: Use single set of AUX powerwell ops for gen11+
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-17 |
Matt Roper | drm/i915/tgl: TBT AUX should use TC power well ops
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-15 |
Matt Roper | drm/i915/tgl: Initialize multicast register steering...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-15 |
Matt Roper | drm/i915/tgl: Extend Wa_1409767108:tgl to B0 stepping
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-04-15 |
Matt Roper | drm/i915/tgl: Add Wa_14010477008:tgl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-16 |
Matt Roper | drm/i915: Handle all MCR ranges
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Add Wa_1605460711 / Wa_1408767742 to ICL...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Apply Wa_1406680159:icl,ehl as an engine...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Add Wa_1406306137:icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Add Wa_1604278689:icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Add Wa_1209644611:icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-13 |
Matt Roper | drm/i915: Handle all MCR ranges
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-09 |
Matt Roper | drm/i915/tgl: Don't treat unslice registers as masked
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-04 |
Matt Roper | drm/i915/ehl: Check PHY type before reading DPLL frequency
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-02 |
Matt Roper | drm/i915/tgl: Add Wa_22010178259:tgl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-03-02 |
Matt Roper | drm/i915: Program MBUS with rmw during initialization
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-26 |
Matt Roper | drm/i915/tgl: Allow DC5/DC6 entry while PG2 is active
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-21 |
Matt Roper | drm/i915/tgl: Add Wa_22010178259:tgl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-20 |
Matt Roper | drm/i915/tgl: Program MBUS_ABOX{1,2}_CTL during display...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-20 |
Matt Roper | drm/i915: Program MBUS with rmw during initialization
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-17 |
Matt Roper | drm/i915/ehl: Update port clock voltage level requirements
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-10 |
Matt Roper | drm/i915/tgl: Update cdclk voltage level settings
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-02-10 |
Matt Roper | drm/i915/ehl: Update port clock voltage level requirements
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-01-14 |
Matt Roper | drm/i915/gen11: Add additional pcode status values
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-01-07 |
Matt Roper | drm/i915: Add Wa_1407352427:icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-01-07 |
Matt Roper | drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2020-01-01 |
Matt Roper | drm/i915: Add Wa_1407352427:icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-31 |
Matt Roper | drm/i915/tgl: Assume future platforms will inherit...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-27 |
Matt Roper | drm/i915/tgl: Extend Wa_1408615072 to tgl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-27 |
Matt Roper | drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-27 |
Matt Roper | drm/i915: Extend WaDisableDARBFClkGating to icl,ehl,tgl
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-16 |
Matt Roper | drm/i915/tgl: Drop Wa#1178
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-16 |
Matt Roper | drm/i915/ehl: Define EHL powerwells independently of ICL
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-13 |
Matt Roper | drm/i915/icl: Cleanup combo PHY aux power well handlers
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-13 |
Matt Roper | drm/i915/tgl: Drop Wa#1178
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-13 |
Matt Roper | drm/i915/ehl: Define EHL powerwells independently of ICL
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-10 |
Matt Roper | drm/i915/tgl: Program BW_BUDDY registers during display...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-03 |
Matt Roper | drm/i915/irq: Refactor gen11 display interrupt handling
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-03 |
Matt Roper | drm/i915/ehl: Make icp_digital_port_connected() use...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-02 |
Matt Roper | drm/i915: Program SHPD_FILTER_CNT on CNP+
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-02 |
Matt Roper | drm/i915/ehl: Make icp_digital_port_connected() use...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-12-02 |
Matt Roper | drm/i915: Handle SDEISR according to PCH rather than...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-25 |
Matt Roper | drm/i915/tgl: Add DKL PHY vswing table for HDMI
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-25 |
Matt Roper | drm/i915/ehl: Update voltage level checks
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-19 |
Matt Roper | drm/i915/tgl: Add DKL PHY vswing table for HDMI
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-19 |
Matt Roper | drm/i915/ehl: Update voltage level checks
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-18 |
Matt Roper | drm/i915/vbt: Handle generic DTD block
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-18 |
Matt Roper | drm/i915/vbt: Parse panel options separately from timing...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-13 |
Matt Roper | drm/i915/tgl: MOCS table update
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-13 |
Matt Roper | Revert "drm/i915/ehl: Update MOCS table for EHL"
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-13 |
Matt Roper | drm/i915/tgl: MOCS table update
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-13 |
Matt Roper | Revert "drm/i915/ehl: Update MOCS table for EHL"
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-11-07 |
Matt Roper | drm/i915: Expand documentation for gen12 DP pre-enable...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-29 |
Matt Roper | drm/i915: Provide more information on DP AUX failures
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-29 |
Matt Roper | drm/i915/tgl: Add AUX B & C to DC_OFF_POWER_DOMAINS
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-29 |
Matt Roper | drm/i915: Drop unused AUX register offsets
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-28 |
Matt Roper | drm/i915/tgl: Handle AUX interrupts for TC ports
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-24 |
Matt Roper | drm/i915: Catch GTT fault errors for gen11+ planes
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-16 |
Matt Roper | drm/i915: Introduce Jasper Lake PCH
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-16 |
Matt Roper | drm/i915/ehl: Don't forget to set TC long detect function
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-09 |
Matt Roper | drm/i915/cml: Add second PCH ID for CMP
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-09 |
Matt Roper | drm/i915: Select DPLL's via mask
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-10-07 |
Matt Roper | drm/i915/vbt: Child device size remains unchanged through...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-26 |
Matt Roper | drm/i915: Small joiner RAM buffer size is platform...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-25 |
Matt Roper | drm: Destroy the correct mutex name in drm_dp_mst_topology_m...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-19 |
Matt Roper | drm/i915: Unify ICP and MCC hotplug pin tables
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-19 |
Matt Roper | drm/i915: Future-proof DDC pin mapping
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-18 |
Matt Roper | drm/i915/cml: Add second PCH ID for CMP
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Enhance cdclk sanitization
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Add calc_voltage_level display vfunc
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Consolidate {bxt,cnl,icl}_uninit_cdclk
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Kill cnl_sanitize_cdclk()
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Use literal representation of cdclk tables
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-11 |
Matt Roper | drm/i915: Consolidate bxt/cnl/icl cdclk readout
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-09-06 |
Matt Roper | drm/i915/tgl: Use refclk/2 as bypass frequency
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-08-30 |
Matt Roper | drm/i915: Add 324mhz and 326.4mhz cdclks for gen11+
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-08-30 |
Matt Roper | drm/i915: Allow /2 CD2X divider on gen11+
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-08-19 |
Matt Roper | drm/i915/gen11: Allow usage of all GPIO pins
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-08-01 |
Matt Roper | drm/i915/ehl: Don't forget to handle port C's hotplug...
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-07-15 |
Matt Roper | drm/i915/ehl: Map MCC pins based on PHY, not port
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-07-11 |
Matt Roper | drm/i915/ehl: Enable DDI-D
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| 2019-07-11 |
Matt Roper | drm/i915: Transition port type checks to phy checks
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
commit | commitdiff | tree |
| next |
projects / linux-2.6-microblaze.git / search