From f868ef995b32f0f08d7b6ce700bbe25de3ad65ac Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 8 Jan 2013 22:43:12 +0100 Subject: [PATCH] pinctrl: pinconf-generic: add drive strength parameter Some pin configurations IP allows to set the current output to the pin. This patch adds such a parameter to the pinconf-generic mechanism. This parameter takes as argument the drive strength in mA. Signed-off-by: Maxime Ripard Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index b23d99da3b4b..40d7bb9c7562 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,6 +46,8 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as + * argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, @@ -76,6 +78,7 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_DRIVE_STRENGTH, PIN_CONFIG_INPUT_SCHMITT_DISABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, -- 2.20.1