From d8f8d467f53a192041193fc17176ceb013f4d041 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Thu, 24 May 2018 20:01:55 +0200 Subject: [PATCH] arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator This patch removes the unused bt-en-1-8v regulator and moves the bt_en_gios claim to the pm8994_gpios node. This bt_en_gpio could have been moved to the bluetooth serial node but instead this node declares an 'enable' gpio addressing the bt_en_gpio. This is needed by the Qualcomm QCA6174 WLAN/BT combo chip that needs to have the bt_en_gpio claimed even if only WLAN is used. Signed-off-by: Thierry Escande Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 2 +- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14 -------------- 2 files changed, 1 insertion(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index 6167af955659..a6ad3d7fe655 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -4,7 +4,7 @@ &pm8994_gpios { pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; ls_exp_gpio_f: pm8994_gpio5 { pinconf { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index ca72e7eca58e..0f829db33efe 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -179,19 +179,6 @@ pinctrl-0 = <&usb2_vbus_det_gpio>; }; - bt_en: bt-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "bt-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; - wlan_en: wlan-en-1-8v { pinctrl-names = "default"; pinctrl-0 = <&wlan_en_gpios>; @@ -212,7 +199,6 @@ status = "okay"; perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; - vddpe1-supply = <&bt_en>; }; pcie@608000 { -- 2.20.1