From cfd97f94d036bf36122fa19d075c5741347aa178 Mon Sep 17 00:00:00 2001 From: Colton Lewis Date: Sat, 25 Jul 2020 05:02:57 +0000 Subject: [PATCH] spi: correct kernel-doc inconsistency Silence documentation build warnings by correcting kernel-doc comment for spi_transfer struct. Signed-off-by: Colton Lewis Link: https://lore.kernel.org/r/20200725050242.279548-1-colton.w.lewis@protonmail.com Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index f8b721fcd5c6..99380c0825db 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -329,6 +329,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @mode_bits: flags understood by this controller driver + * @buswidth_override_bits: flags to override for this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is * supported. If set, the SPI core will reject any transfer with an @@ -846,12 +847,7 @@ extern void spi_res_release(struct spi_controller *ctlr, * processed the word, i.e. the "pre" timestamp should be taken before * transmitting the "pre" word, and the "post" timestamp after receiving * transmit confirmation from the controller for the "post" word. - * @timestamped_pre: Set by the SPI controller driver to denote it has acted - * upon the @ptp_sts request. Not set when the SPI core has taken care of - * the task. SPI device drivers are free to print a warning if this comes - * back unset and they need the better resolution. - * @timestamped_post: See above. The reason why both exist is that these - * booleans are also used to keep state in the core SPI logic. + * @timestamped: true if the transfer has been timestamped * @error: Error status logged by spi controller driver. * * SPI transfers always write the same number of bytes as they read. -- 2.20.1