From c02ff21952a6a19ca375b9dc4f9a5609616a82b8 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 25 Aug 2020 05:52:32 +0200 Subject: [PATCH] media: uapi: h264: Clean DPB entry interface As discussed recently, the current interface for the Decoded Picture Buffer is not enough to properly support field coding. This commit introduces enough semantics to support frame and field coding, and to signal how DPB entries are "used for reference". Reserved fields will be added by a follow-up commit. Signed-off-by: Ezequiel Garcia Tested-by: Jonas Karlman Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../media/v4l/ext-ctrls-codec.rst | 24 ++++++------------- drivers/media/v4l2-core/v4l2-h264.c | 4 ++-- drivers/staging/media/rkvdec/rkvdec-h264.c | 17 ++++++------- include/media/h264-ctrls.h | 2 +- 4 files changed, 19 insertions(+), 28 deletions(-) diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index a417a1ae50d5..49febae8fd0f 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -2057,6 +2057,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - __u16 - ``pic_num`` - + * - __u8 + - ``fields`` + - Specifies how the DPB entry is referenced. See :ref:`Reference Fields ` * - __s32 - ``top_field_order_cnt`` - @@ -2080,29 +2083,16 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID`` - 0x00000001 - - The DPB entry is valid and should be considered + - The DPB entry is valid (non-empty) and should be considered. * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE`` - 0x00000002 - - The DPB entry is currently being used as a reference frame + - The DPB entry is used for reference. * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM`` - 0x00000004 - - The DPB entry is a long term reference frame + - The DPB entry is used for long-term reference. * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD`` - 0x00000008 - - The DPB entry is a field reference, which means only one of the field - will be used when decoding the new frame/field. When not set the DPB - entry is a frame reference (both fields will be used). Note that this - flag does not say anything about the number of fields contained in the - reference frame, it just describes the one used to decode the new - field/frame - * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD`` - - 0x00000010 - - The DPB entry is a bottom field reference (only the bottom field of the - reference frame is needed to decode the new frame/field). Only valid if - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but - V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the - DPB entry is a top field reference + - The DPB entry is a single field or a complementary field pair. ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)`` Specifies the decoding mode to use. Currently exposes slice-based and diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c index edf6225f0522..f4742408436b 100644 --- a/drivers/media/v4l2-core/v4l2-h264.c +++ b/drivers/media/v4l2-core/v4l2-h264.c @@ -66,10 +66,10 @@ v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b, else b->refs[i].frame_num = dpb[i].frame_num; - if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD)) + if (dpb[i].fields == V4L2_H264_FRAME_REF) pic_order_count = min(dpb[i].top_field_order_cnt, dpb[i].bottom_field_order_cnt); - else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD) + else if (dpb[i].fields & V4L2_H264_BOTTOM_FIELD_REF) pic_order_count = dpb[i].bottom_field_order_cnt; else pic_order_count = dpb[i].top_field_order_cnt; diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c index 7b66e2743a4f..d1f2715f30ae 100644 --- a/drivers/staging/media/rkvdec/rkvdec-h264.c +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c @@ -949,16 +949,17 @@ static void config_registers(struct rkvdec_ctx *ctx, for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) { struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i); - refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0) | - RKVDEC_COLMV_USED_FLAG_REF; + refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0); - if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD)) - refer_addr |= RKVDEC_TOPFIELD_USED_REF | - RKVDEC_BOTFIELD_USED_REF; - else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD) - refer_addr |= RKVDEC_BOTFIELD_USED_REF; - else + if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) + refer_addr |= RKVDEC_COLMV_USED_FLAG_REF; + if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD) + refer_addr |= RKVDEC_FIELD_REF; + + if (dpb[i].fields & V4L2_H264_TOP_FIELD_REF) refer_addr |= RKVDEC_TOPFIELD_USED_REF; + if (dpb[i].fields & V4L2_H264_BOTTOM_FIELD_REF) + refer_addr |= RKVDEC_BOTFIELD_USED_REF; writel_relaxed(dpb[i].top_field_order_cnt, rkvdec->regs + poc_reg_tbl_top_field[i]); diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h index 9a6722edf004..0529e75cce5f 100644 --- a/include/media/h264-ctrls.h +++ b/include/media/h264-ctrls.h @@ -210,12 +210,12 @@ struct v4l2_ctrl_h264_slice_params { #define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE 0x02 #define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04 #define V4L2_H264_DPB_ENTRY_FLAG_FIELD 0x08 -#define V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD 0x10 struct v4l2_h264_dpb_entry { __u64 reference_ts; __u16 frame_num; __u16 pic_num; + __u8 fields; /* Note that field is indicated by v4l2_buffer.field */ __s32 top_field_order_cnt; __s32 bottom_field_order_cnt; -- 2.20.1