From 9e65582a8e8715f883a34eea66e0643778ce878d Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 4 Feb 2010 19:42:42 +0100 Subject: [PATCH] ARM: 5919/1: ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines This patch implements the work-around for the errata 588369.The secure API is used to alter L2 debug register because of trust-zone. This version updated with comments from Russell and Catalin and generated against 2.6.33-rc6 mainline kernel. Detail comments can be found: http://www.spinics.net/lists/linux-omap/msg23431.html Signed-off-by: Woodruff Richard Signed-off-by: Santosh Shilimkar Acked-by: Catalin Marinas Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/Kconfig | 13 +++++++++++++ arch/arm/mm/cache-l2x0.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 762ae536f909..0f1ad743ccdd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -924,6 +924,19 @@ config ARM_ERRATA_460075 ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config PL310_ERRATA_588369 + bool "Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 && ARCH_OMAP4 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. Note that this errata + uses Texas Instrument's secure monitor api. endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 1a14d18e5713..07334632d3e2 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -56,12 +56,42 @@ static inline void l2x0_inv_line(unsigned long addr) writel(addr, base + L2X0_INV_LINE_PA); } +#ifdef CONFIG_PL310_ERRATA_588369 +static void debug_writel(unsigned long val) +{ + extern void omap_smc1(u32 fn, u32 arg); + + /* + * Texas Instrument secure monitor api to modify the + * PL310 Debug Control Register. + */ + omap_smc1(0x100, val); +} + +static inline void l2x0_flush_line(unsigned long addr) +{ + void __iomem *base = l2x0_base; + + /* Clean by PA followed by Invalidate by PA */ + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); + writel(addr, base + L2X0_CLEAN_LINE_PA); + cache_wait(base + L2X0_INV_LINE_PA, 1); + writel(addr, base + L2X0_INV_LINE_PA); +} +#else + +/* Optimised out for non-errata case */ +static inline void debug_writel(unsigned long val) +{ +} + static inline void l2x0_flush_line(unsigned long addr) { void __iomem *base = l2x0_base; cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); writel(addr, base + L2X0_CLEAN_INV_LINE_PA); } +#endif static inline void l2x0_inv_all(void) { @@ -83,13 +113,17 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); + debug_writel(0x03); l2x0_flush_line(start); + debug_writel(0x00); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); + debug_writel(0x03); l2x0_flush_line(end); + debug_writel(0x00); } while (start < end) { @@ -145,10 +179,12 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); + debug_writel(0x03); while (start < blk_end) { l2x0_flush_line(start); start += CACHE_LINE_SIZE; } + debug_writel(0x00); if (blk_end < end) { spin_unlock_irqrestore(&l2x0_lock, flags); -- 2.20.1