From 981dd162b63578aee34b5c68795e246734b76d70 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Thu, 4 Sep 2025 11:05:29 -0500 Subject: [PATCH] regulator: bq257xx: Add bq257xx boost regulator driver Add support for the boost regulator found in the Texas Instruments BQ25703. The boost regulator is capable of outputting between 4.48 and 20.8 volts and between 0 and 6.35 amps. Signed-off-by: Chris Morgan Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com Signed-off-by: Lee Jones --- drivers/regulator/Kconfig | 8 ++ drivers/regulator/Makefile | 1 + drivers/regulator/bq257xx-regulator.c | 186 ++++++++++++++++++++++++++ 3 files changed, 195 insertions(+) create mode 100644 drivers/regulator/bq257xx-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index eaa6df1c9f80..60b14472c599 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -297,6 +297,14 @@ config REGULATOR_BD96801 This driver can also be built as a module. If so, the module will be called bd96801-regulator. +config REGULATOR_BQ257XX + tristate "TI BQ257XX regulator family" + depends on MFD_BQ257XX + depends on GPIOLIB || COMPILE_TEST + help + Say Y to enable support for the boost regulator function of + the BQ257XX family of charger circuits. + config REGULATOR_CPCAP tristate "Motorola CPCAP regulator" depends on MFD_CPCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index be98b29d6675..e9ab5945b3c8 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_BD957XMUF) += bd9576-regulator.o +obj-$(CONFIG_REGULATOR_BQ257XX) += bq257xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x-regulator.o obj-$(CONFIG_REGULATOR_BD96801) += bd96801-regulator.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o diff --git a/drivers/regulator/bq257xx-regulator.c b/drivers/regulator/bq257xx-regulator.c new file mode 100644 index 000000000000..fc1ccede4468 --- /dev/null +++ b/drivers/regulator/bq257xx-regulator.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * BQ257XX Battery Charger Driver + * Copyright (C) 2025 Chris Morgan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct bq257xx_reg_data { + struct bq257xx_device *bq; + struct regulator_dev *bq257xx_reg; + struct gpio_desc *otg_en_gpio; + struct regulator_desc desc; +}; + +static int bq25703_vbus_get_cur_limit(struct regulator_dev *rdev) +{ + struct bq257xx_reg_data *pdata = rdev_get_drvdata(rdev); + int ret; + unsigned int reg; + + ret = regmap_read(pdata->bq->regmap, BQ25703_OTG_CURRENT, ®); + if (ret) + return ret; + return FIELD_GET(BQ25703_OTG_CUR_MASK, reg) * BQ25703_OTG_CUR_STEP_UA; +} + +/* + * Check if the minimum current and maximum current requested are + * sane values, then set the register accordingly. + */ +static int bq25703_vbus_set_cur_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct bq257xx_reg_data *pdata = rdev_get_drvdata(rdev); + unsigned int reg; + + if ((min_uA > BQ25703_OTG_CUR_MAX_UA) || (max_uA < 0)) + return -EINVAL; + + reg = (max_uA / BQ25703_OTG_CUR_STEP_UA); + + /* Catch rounding errors since our step is 50000uA. */ + if ((reg * BQ25703_OTG_CUR_STEP_UA) < min_uA) + return -EINVAL; + + return regmap_write(pdata->bq->regmap, BQ25703_OTG_CURRENT, + FIELD_PREP(BQ25703_OTG_CUR_MASK, reg)); +} + +static int bq25703_vbus_enable(struct regulator_dev *rdev) +{ + struct bq257xx_reg_data *pdata = rdev_get_drvdata(rdev); + + if (pdata->otg_en_gpio) + gpiod_set_value_cansleep(pdata->otg_en_gpio, 1); + return regulator_enable_regmap(rdev); +} + +static int bq25703_vbus_disable(struct regulator_dev *rdev) +{ + struct bq257xx_reg_data *pdata = rdev_get_drvdata(rdev); + + if (pdata->otg_en_gpio) + gpiod_set_value_cansleep(pdata->otg_en_gpio, 0); + return regulator_disable_regmap(rdev); +} + +static const struct regulator_ops bq25703_vbus_ops = { + .enable = bq25703_vbus_enable, + .disable = bq25703_vbus_disable, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = bq25703_vbus_get_cur_limit, + .set_current_limit = bq25703_vbus_set_cur_limit, +}; + +static const struct regulator_desc bq25703_vbus_desc = { + .name = "vbus", + .of_match = of_match_ptr("vbus"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .ops = &bq25703_vbus_ops, + .min_uV = BQ25703_OTG_VOLT_MIN_UV, + .uV_step = BQ25703_OTG_VOLT_STEP_UV, + .n_voltages = BQ25703_OTG_VOLT_NUM_VOLT, + .enable_mask = BQ25703_EN_OTG_MASK, + .enable_reg = BQ25703_CHARGE_OPTION_3, + .enable_val = BQ25703_EN_OTG_MASK, + .disable_val = 0, + .vsel_reg = BQ25703_OTG_VOLT, + .vsel_mask = BQ25703_OTG_VOLT_MASK, +}; + +/* Get optional GPIO for OTG regulator enable. */ +static void bq257xx_reg_dt_parse_gpio(struct platform_device *pdev) +{ + struct device_node *child, *subchild; + struct bq257xx_reg_data *pdata = platform_get_drvdata(pdev); + + child = of_get_child_by_name(pdev->dev.of_node, + pdata->desc.regulators_node); + if (!child) + return; + + subchild = of_get_child_by_name(child, pdata->desc.of_match); + if (!subchild) + return; + + of_node_put(child); + + pdata->otg_en_gpio = devm_fwnode_gpiod_get_index(&pdev->dev, + of_fwnode_handle(subchild), + "enable", 0, + GPIOD_OUT_LOW, + pdata->desc.of_match); + + of_node_put(subchild); + + if (IS_ERR(pdata->otg_en_gpio)) { + dev_err(&pdev->dev, "Error getting enable gpio: %ld\n", + PTR_ERR(pdata->otg_en_gpio)); + return; + } +} + +static int bq257xx_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bq257xx_device *bq = dev_get_drvdata(pdev->dev.parent); + struct bq257xx_reg_data *pdata; + struct device_node *np = dev->of_node; + struct regulator_config cfg = {}; + + pdev->dev.of_node = pdev->dev.parent->of_node; + pdev->dev.of_node_reused = true; + + pdata = devm_kzalloc(&pdev->dev, sizeof(struct bq257xx_reg_data), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->bq = bq; + pdata->desc = bq25703_vbus_desc; + + platform_set_drvdata(pdev, pdata); + bq257xx_reg_dt_parse_gpio(pdev); + + cfg.dev = &pdev->dev; + cfg.driver_data = pdata; + cfg.of_node = np; + cfg.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!cfg.regmap) + return -ENODEV; + + pdata->bq257xx_reg = devm_regulator_register(dev, &pdata->desc, &cfg); + if (IS_ERR(pdata->bq257xx_reg)) { + return dev_err_probe(&pdev->dev, PTR_ERR(pdata->bq257xx_reg), + "error registering bq257xx regulator"); + } + + return 0; +} + +static struct platform_driver bq257xx_reg_driver = { + .driver = { + .name = "bq257xx-regulator", + }, + .probe = bq257xx_regulator_probe, +}; + +module_platform_driver(bq257xx_reg_driver); + +MODULE_DESCRIPTION("bq257xx regulator driver"); +MODULE_AUTHOR("Chris Morgan "); +MODULE_LICENSE("GPL"); -- 2.20.1