From 94831463690c2a1bab2bcb9d6637e469b63d5536 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 27 Aug 2009 11:00:06 +0100 Subject: [PATCH] Staging: et131x: attack the config stuff Prune this back as most of it isn't relevant or used Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et131x_adapter.h | 2 - drivers/staging/et131x/et131x_config.c | 110 +++++------------------- drivers/staging/et131x/et131x_initpci.c | 7 +- 3 files changed, 23 insertions(+), 96 deletions(-) diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h index bbbada027cd0..63d7c8afada8 100644 --- a/drivers/staging/et131x/et131x_adapter.h +++ b/drivers/staging/et131x/et131x_adapter.h @@ -256,8 +256,6 @@ struct et131x_adapter { u8 RegistryPhyComa; /* Phy Coma mode enable/disable */ u32 RegistryRxMemEnd; /* Size of internal rx memory */ - u8 RegistryMACStat; /* If set, read MACSTAT, else don't */ - u32 RegistryVlanTag; /* 802.1q Vlan TAG */ u32 RegistryJumboPacket; /* Max supported ethernet packet size */ /* Validation helpers */ diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c index a31f82aea0e3..358e6f699356 100644 --- a/drivers/staging/et131x/et131x_config.c +++ b/drivers/staging/et131x/et131x_config.c @@ -105,22 +105,10 @@ extern dbg_info_t *et131x_dbginfo; #define PARM_SPEED_DUPLEX_MIN 0 #define PARM_SPEED_DUPLEX_MAX 5 -#define PARM_VLAN_TAG_DEF 0 -#define PARM_VLAN_TAG_MIN 0 -#define PARM_VLAN_TAG_MAX 4095 - #define PARM_FLOW_CTL_DEF 0 #define PARM_FLOW_CTL_MIN 0 #define PARM_FLOW_CTL_MAX 3 -#define PARM_WOL_LINK_DEF 3 -#define PARM_WOL_LINK_MIN 0 -#define PARM_WOL_LINK_MAX 3 - -#define PARM_WOL_MATCH_DEF 7 -#define PARM_WOL_MATCH_MIN 0 -#define PARM_WOL_MATCH_MAX 7 - #define PARM_JUMBO_PKT_DEF 1514 #define PARM_JUMBO_PKT_MIN 1514 #define PARM_JUMBO_PKT_MAX 9216 @@ -129,10 +117,6 @@ extern dbg_info_t *et131x_dbginfo; #define PARM_PHY_COMA_MIN 0 #define PARM_PHY_COMA_MAX 1 -#define PARM_MAC_STAT_DEF 1 -#define PARM_MAC_STAT_MIN 0 -#define PARM_MAC_STAT_MAX 1 - #define PARM_SC_GAIN_DEF 7 #define PARM_SC_GAIN_MIN 0 #define PARM_SC_GAIN_MAX 7 @@ -145,13 +129,7 @@ extern dbg_info_t *et131x_dbginfo; #define PARM_NMI_DISABLE_MIN 0 #define PARM_NMI_DISABLE_MAX 2 -#define PARM_DMA_CACHE_DEF 0 - -#define PARM_PHY_LOOPBK_DEF 0 -#define PARM_PHY_LOOPBK_MIN 0 -#define PARM_PHY_LOOPBK_MAX 1 -#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 } /* Module parameter for disabling NMI * et131x_speed_set : @@ -184,109 +162,61 @@ MODULE_PARM_DESC(et131x_speed_set, * @etdev: pointer to the private adapter struct * * Parses a configuration from some location (module parameters, for example) - * into the private adapter struct + * into the private adapter struct. This really has no sensible analogy in + * Linux as sysfs parameters are dynamic. Several things that were hee could + * go into sysfs, but other stuff like speed handling is part of the mii + * interfaces/ethtool. */ void et131x_config_parse(struct et131x_adapter *etdev) { - uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF; + static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; + static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 }; + static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 }; DBG_ENTER(et131x_dbginfo); - /* - * The NDIS driver uses the registry to store persistent per-device - * configuration, and reads this configuration into the appropriate - * elements of the private adapter structure on initialization. - * Because Linux has no analog to the registry, use this function to - * initialize the private adapter structure with a default - * configuration. - * - * One other possibility is to use a series of module parameters which - * can be passed in by the caller when the module is initialized. - * However, this implementation does not allow for seperate - * configurations in the event multiple devices are present, and hence - * will not suffice. - * - * If another method is derived which addresses this problem, this is - * where it should be implemented. - */ + etdev->SpeedDuplex = et131x_speed_set; - /* Set the private adapter struct with default values for the - * corresponding parameters - */ - if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) { + if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || + et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { + dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n"); + et131x_speed_set = PARM_SPEED_DUPLEX_DEF; + } + else if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", et131x_speed_set); - etdev->SpeedDuplex = et131x_speed_set; - } else { - etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; - } /* etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */ - etdev->RegistryVlanTag = PARM_VLAN_TAG_DEF; etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF; etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; etdev->RegistryPhyComa = PARM_PHY_COMA_DEF; - etdev->RegistryMACStat = PARM_MAC_STAT_DEF; if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) etdev->RegistryNMIDisable = et131x_nmi_disable; else etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; - etdev->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; + etdev->RegistryPhyLoopbk = 0; /* 0 off 1 on */ /* Set the MAC address to a default */ - memcpy(etdev->CurrentAddress, macAddrDef, ETH_ALEN); + memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN); etdev->bOverrideAddress = false; - DBG_TRACE(et131x_dbginfo, - "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n", - etdev->CurrentAddress[0], etdev->CurrentAddress[1], - etdev->CurrentAddress[2], etdev->CurrentAddress[3], - etdev->CurrentAddress[4], etdev->CurrentAddress[5]); - /* Decode SpeedDuplex * * Set up as if we are auto negotiating always and then change if we * go into force mode - */ - etdev->AiForceSpeed = 0; /* Auto speed */ - etdev->AiForceDpx = 0; /* Auto FDX */ - - /* If we are the 10/100 device, and gigabit is somehow requested then + * + * If we are the 10/100 device, and gigabit is somehow requested then * knock it down to 100 full. */ if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST && etdev->SpeedDuplex == 5) etdev->SpeedDuplex = 4; - switch (etdev->SpeedDuplex) { - case 1: /* 10Mb Half-Duplex */ - etdev->AiForceSpeed = 10; - etdev->AiForceDpx = 1; - break; - - case 2: /* 10Mb Full-Duplex */ - etdev->AiForceSpeed = 10; - etdev->AiForceDpx = 2; - break; - - case 3: /* 100Mb Half-Duplex */ - etdev->AiForceSpeed = 100; - etdev->AiForceDpx = 1; - break; - - case 4: /* 100Mb Full-Duplex */ - etdev->AiForceSpeed = 100; - etdev->AiForceDpx = 2; - break; - - case 5: /* 1000Mb Full-Duplex */ - etdev->AiForceSpeed = 1000; - etdev->AiForceDpx = 2; - break; - } + etdev->AiForceSpeed = speed[etdev->SpeedDuplex]; + etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */ DBG_LEAVE(et131x_dbginfo); } diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 4d4594198621..c489090178be 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -442,10 +442,9 @@ void et131x_error_timer_handler(unsigned long data) pm_csr.value = readl(&etdev->regs->global.pm_csr.value); - if (pm_csr.bits.pm_phy_sw_coma == 0) { - if (etdev->RegistryMACStat) - UpdateMacStatHostCounters(etdev); - } else + if (pm_csr.bits.pm_phy_sw_coma == 0) + UpdateMacStatHostCounters(etdev); + else DBG_VERBOSE(et131x_dbginfo, "No interrupts, in PHY coma, pm_csr = 0x%x\n", pm_csr.value); -- 2.20.1