From 8f762fe5819f8561343cf02e234789744ed68a98 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Mon, 13 May 2019 11:14:58 +0000 Subject: [PATCH] dt-bindings: soc: fsl: qe: document new fsl,qe-snums binding Reading table 4-30, and its footnotes, of the QUICC Engine Block Reference Manual shows that the set of snum _values_ is not necessarily just a function of the _number_ of snums, as given in the fsl,qe-num-snums property. As an alternative, to make it easier to add support for other variants of the QUICC engine IP, this introduces a new binding fsl,qe-snums, which automatically encodes both the number of snums and the actual values to use. Signed-off-by: Rasmus Villemoes Reviewed-by: Rob Herring Signed-off-by: Li Yang --- .../devicetree/bindings/soc/fsl/cpm_qe/qe.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt index d7afaff5faff..05ec2a838c54 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt @@ -18,7 +18,8 @@ Required properties: - reg : offset and length of the device registers. - bus-frequency : the clock frequency for QUICC Engine. - fsl,qe-num-riscs: define how many RISC engines the QE has. -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the +- fsl,qe-snums: This property has to be specified as '/bits/ 8' value, + defining the array of serial number (SNUM) values for the virtual threads. Optional properties: @@ -34,6 +35,11 @@ Recommended properties - brg-frequency : the internal clock source frequency for baud-rate generators in Hz. +Deprecated properties +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use + for the threads. Use fsl,qe-snums instead to not only specify the + number of snums, but also their values. + Example: qe@e0100000 { #address-cells = <1>; @@ -44,6 +50,11 @@ Example: reg = ; brg-frequency = <0>; bus-frequency = <179A7B00>; + fsl,qe-snums = /bits/ 8 < + 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D + 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89 + 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9 + 0xD8 0xD9 0xE8 0xE9>; } * Multi-User RAM (MURAM) -- 2.20.1