From 870e0ecc31f4d55efea75f82808da58cb7b930db Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Wed, 21 Feb 2018 09:59:59 +0100 Subject: [PATCH] ARM: dts: artpec: add disabled node for PCIe endpoint mode The PCIe controller in the artpec6 SoC supports both root complex and endpoint mode, however, the controller can only be used in one of the modes. Both pci nodes are disabled by default. A DTS file can enable one of them, depending on what mode it wants to run. Signed-off-by: Niklas Cassel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/artpec6.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 1c46df0c03ce..b7720be8afb1 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -154,6 +154,10 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + /* + * Both pci nodes cannot be enabled at the same time, + * leave the unwanted node as disabled. + */ pcie: pcie@f8050000 { compatible = "axis,artpec6-pcie", "snps,dw-pcie"; reg = <0xf8050000 0x2000 @@ -181,6 +185,20 @@ status = "disabled"; }; + pcie_ep: pcie_ep@f8050000 { + compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie"; + reg = <0xf8050000 0x2000 + 0xf8051000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x20000000>; + reg-names = "dbi", "dbi2", "phy", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <2>; + num-lanes = <2>; + axis,syscon-pcie = <&syscon>; + status = "disabled"; + }; + pinctrl: pinctrl@f801d000 { compatible = "axis,artpec6-pinctrl"; reg = <0xf801d000 0x400>; -- 2.20.1