From 831e0b718c8d28afe6c9c9c2fcaebb5a730201ed Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 8 Jul 2011 23:36:07 -0300 Subject: [PATCH] [media] Realtek RTL28xxU serie DVB USB interface driver For now it supports only Realtek RTL2831U chip. RTL2831U is integrated DVB USB interface and DVB-T demod. DVB-T demod integrated to RTL2831U is Realtek RTL2830. Supported tuners are QT1010, MT2060 and MXL5005S. Signed-off-by: Antti Palosaari [mchehab@redhat.com: fix a small typo] Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 10 + drivers/media/dvb/dvb-usb/Makefile | 3 + drivers/media/dvb/dvb-usb/rtl28xxu.c | 709 +++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/rtl28xxu.h | 210 ++++++++ 4 files changed, 932 insertions(+) create mode 100644 drivers/media/dvb/dvb-usb/rtl28xxu.c create mode 100644 drivers/media/dvb/dvb-usb/rtl28xxu.h diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e894bad6538e..615429274516 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -411,3 +411,13 @@ config DVB_USB_MXL111SF select VIDEO_TVEEPROM help Say Y here to support the MxL111SF USB2.0 DTV receiver. + +config DVB_USB_RTL28XXU + tristate "Realtek RTL28xxU DVB USB support" + depends on DVB_USB && EXPERIMENTAL + select DVB_RTL2830 + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + help + Say Y here to support the Realtek RTL28xxU DVB USB receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index d9549cb27698..7e476cb49334 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -107,6 +107,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o +dvb-usb-rtl28xxu-objs = rtl28xxu.o +obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o + ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 ccflags-y += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c new file mode 100644 index 000000000000..e7b1811e3567 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c @@ -0,0 +1,709 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "rtl28xxu.h" + +#include "rtl2830.h" + +#include "qt1010.h" +#include "mt2060.h" +#include "mxl5005s.h" + +/* debug */ +static int dvb_usb_rtl28xxu_debug; +module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) +{ + int ret; + unsigned int pipe; + u8 requesttype; + u8 *buf; + + buf = kmalloc(req->size, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err; + } + + if (req->index & CMD_WR_FLAG) { + /* write */ + memcpy(buf, req->data, req->size); + requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); + pipe = usb_sndctrlpipe(d->udev, 0); + } else { + /* read */ + requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, + req->index, buf, req->size, 1000); + + deb_dump(0, requesttype, req->value, req->index, buf, req->size, + deb_xfer); + + if (ret < 0) + goto err_dealloc; + else + ret = 0; + + /* read request, copy returned data to return buf */ + if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) + memcpy(req->data, buf, req->size); + + kfree(buf); + return ret; + +err_dealloc: + kfree(buf); +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_WR; + else + req.index = CMD_SYS_WR; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_RD; + else + req.index = CMD_SYS_RD; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + return rtl2831_wr_regs(d, reg, &val, 1); +} + +static int rtl2831_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + return rtl2831_rd_regs(d, reg, val, 1); +} + +/* I2C */ +static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + int ret; + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct rtl28xxu_req req; + + /* + * It is not known which are real I2C bus xfer limits, but testing + * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. + */ + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num == 2 && !(msg[0].flags & I2C_M_RD) && + (msg[1].flags & I2C_M_RD)) { + if (msg[0].len > 2 || msg[1].len > 24) { + ret = -EOPNOTSUPP; + goto err_unlock; + } + if (msg[0].addr == 0x10) { + /* integrated demod */ + req.value = (msg[0].buf[1] << 8) | (msg[0].addr << 1); + req.index = CMD_DEMOD_RD | msg[0].buf[0]; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* real I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_RD; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { + if (msg[0].len > 22) { + ret = -EOPNOTSUPP; + goto err_unlock; + } + if (msg[0].addr == 0x10) { + /* integrated demod */ + req.value = (msg[0].buf[1] << 8) | (msg[0].addr << 1); + req.index = CMD_DEMOD_WR | msg[0].buf[0]; + req.size = msg[0].len-2; + req.data = &msg[0].buf[2]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* real I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_WR; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else { + ret = -EINVAL; + } + +err_unlock: + mutex_unlock(&d->i2c_mutex); + + return ret ? ret : num; +} + +static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm rtl28xxu_i2c_algo = { + .master_xfer = rtl28xxu_i2c_xfer, + .functionality = rtl28xxu_i2c_func, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36150000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, + +}; + +static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36125000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 0, + .if_dvbt = 4570000, + .vtop = 0x3f, + .krf = 0x04, + .agc_targ_val = 0x3e, +}; + +static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + struct rtl2830_config *rtl2830_config; + /* for MT2060 tuner probe */ + struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf}; + /* for QT1010 tuner probe */ + struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf}; + /* open RTL2831U/RTL2830 I2C gate */ + struct rtl28xxu_req req_gate = {0x0120, 0x0011, 0x0001, "\x08"}; + + deb_info("%s:\n", __func__); + + /* + * RTL2831U GPIOs + * ========================================================= + * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?) + * GPIO2 | LED | 0 off | 1 on | + * GPIO4 | tuner#1 | 0 on | 1 off | MT2060 + */ + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check QT1010 ID(?) register; reg=0f val=2c */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010); + if (ret == 0 && buf[0] == 0x2c) { + priv->tuner = TUNER_RTL2830_QT1010; + rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; + deb_info("%s: QT1010\n", __func__); + goto found; + } else { + deb_info("%s: QT1010 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check MT2060 ID register; reg=00 val=63 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060); + if (ret == 0 && buf[0] == 0x63) { + priv->tuner = TUNER_RTL2830_MT2060; + rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; + deb_info("%s: MT2060\n", __func__); + goto found; + } else { + deb_info("%s: MT2060 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* assume MXL5005S */ + priv->tuner = TUNER_RTL2830_MXL5005S; + rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; + deb_info("%s: MXL5005S\n", __func__); + goto found; + +found: + /* attach demodulator */ + adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, + &adap->dev->i2c_adap); + if (adap->fe[0] == NULL) { + ret = -ENODEV; + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct qt1010_config rtl28xxu_qt1010_config = { + .i2c_address = 0x62, /* 0xc4 */ +}; + +static struct mt2060_config rtl28xxu_mt2060_config = { + .i2c_address = 0x60, /* 0xc0 */ + .clock_out = 0, +}; + +static struct mxl5005s_config rtl28xxu_mxl5005s_config = { + .i2c_address = 0x63, /* 0xc6 */ + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C_H, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct i2c_adapter *rtl2830_tuner_i2c; + struct dvb_frontend *fe = NULL; + + deb_info("%s:\n", __func__); + + /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ + rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); + + switch (priv->tuner) { + case TUNER_RTL2830_QT1010: + fe = dvb_attach(qt1010_attach, adap->fe[0], rtl2830_tuner_i2c, + &rtl28xxu_qt1010_config); + break; + case TUNER_RTL2830_MT2060: + fe = dvb_attach(mt2060_attach, adap->fe[0], rtl2830_tuner_i2c, + &rtl28xxu_mt2060_config, 1220); + break; + case TUNER_RTL2830_MXL5005S: + fe = dvb_attach(mxl5005s_attach, adap->fe[0], rtl2830_tuner_i2c, + &rtl28xxu_mxl5005s_config); + break; + default: + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +{ + int ret; + u8 buf[2], gpio; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + ret = rtl2831_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + if (onoff) { + buf[0] = 0x00; + buf[1] = 0x00; + gpio |= 0x04; /* LED on */ + } else { + buf[0] = 0x10; /* stall EPA */ + buf[1] = 0x02; /* reset EPA */ + gpio &= (~0x04); /* LED off */ + } + + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + ret = rtl2831_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 gpio, sys0; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + /* demod adc */ + ret = rtl2831_rd_reg(d, SYS_SYS0, &sys0); + if (ret) + goto err; + + /* tuner power, read GPIOs */ + ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + if (onoff) { + gpio |= 0x01; /* GPIO0 = 1 */ + gpio &= (~0x10); /* GPIO4 = 0 */ + sys0 = sys0 & 0x0f; + sys0 |= 0xe0; + } else { + +#if 0 /* keep */ + /* + * FIXME: Use .fe_ioctl_override() to prevent demod + * IOCTLs in case of device is powered off. + * + * For now we cannot power off device because most FE IOCTLs + * can be performed only when device is powered. + * Using IOCTLs when device is powered off will result errors + * because register access to demod fails. + */ + gpio &= (~0x01); /* GPIO0 = 0 */ + gpio |= 0x10; /* GPIO4 = 1 */ + sys0 = sys0 & (~0xc0); +#endif + } + + deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + /* demod adc */ + ret = rtl2831_wr_reg(d, SYS_SYS0, sys0); + if (ret) + goto err; + + /* tuner power, write GPIOs */ + ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_rc_query(struct dvb_usb_device *d) +{ + int ret; + u8 buf[5]; + u32 rc_code; + + ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); + if (ret) + goto err; + + if (buf[4] & 0x01) { + if (buf[2] == (u8) ~buf[3]) { + if (buf[0] == (u8) ~buf[1]) { + /* NEC standard (16 bit) */ + rc_code = buf[0] << 8 | buf[2]; + } else { + /* NEC extended (24 bit) */ + rc_code = buf[0] << 16 | + buf[1] << 8 | buf[2]; + } + } else { + /* NEC full (32 bit) */ + rc_code = buf[0] << 24 | buf[1] << 16 | + buf[2] << 8 | buf[3]; + } + + rc_keydown(d->rc_dev, rc_code, 0); + + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + + /* repeated intentionally to avoid extra keypress */ + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +/* DVB USB Driver stuff */ +#define USB_VID_REALTEK 0x0bda +#define USB_PID_RTL2831U 0x2831 +#define USB_PID_FREECOM 0x0160 + +#define RTL2831U_0BDA_2831 0 +#define RTL2831U_14AA_0160 1 + +static struct usb_device_id rtl28xxu_table[] = { + [RTL2831U_0BDA_2831] = { + USB_DEVICE(USB_VID_REALTEK, USB_PID_RTL2831U)}, + [RTL2831U_14AA_0160] = { + USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM)}, + {} /* terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, rtl28xxu_table); + +static struct dvb_usb_device_properties rtl28xxu_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .frontend_attach = rtl28xxu_frontend_attach, + .tuner_attach = rtl28xxu_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl28xxu_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 2, + .devices = { + { + .name = "Realtek RTL2831U reference design", + .cold_ids = {NULL}, + .warm_ids = { + &rtl28xxu_table[RTL2831U_0BDA_2831], NULL}, + }, + { + .name = "Freecom USB2.0 DVB-T", + .cold_ids = {NULL}, + .warm_ids = { + &rtl28xxu_table[RTL2831U_14AA_0160], NULL}, + }, + } + }, +}; + +static int rtl28xxu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret, i; + int properties_count = ARRAY_SIZE(rtl28xxu_properties); + struct dvb_usb_device *d = NULL; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { 0x3033, 0x80 }, + { 0x3020, 0x43 }, + { 0x3021, 0x16 }, + { 0x3022, 0x16 }, + { 0x3023, 0x5a }, + { 0x3024, 0x2d }, + { 0x3025, 0x16 }, + { 0x3026, 0x01 }, + { 0x3028, 0xb0 }, + { 0x3029, 0x04 }, + { 0x302c, 0x88 }, + { 0x302e, 0x13 }, + { 0x3030, 0xdf }, + { 0x3031, 0x05 }, + }; + + deb_info("%s: interface=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return 0; + + for (i = 0; i < properties_count; i++) { + ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i], + THIS_MODULE, &d, adapter_nr); + if (ret == 0 || ret != -ENODEV) + break; + } + + if (ret) + goto err; + + /* init USB endpoints */ + ret = rtl2831_wr_reg(d, USB_SYSCTL_0, 0x09); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + if (ret) + goto err; + + /* init remote controller */ + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val); + if (ret) + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct usb_driver rtl28xxu_driver = { + .name = "dvb_usb_rtl28xxu", + .probe = rtl28xxu_probe, + .disconnect = dvb_usb_device_exit, + .id_table = rtl28xxu_table, +}; + +/* module stuff */ +static int __init rtl28xxu_module_init(void) +{ + int ret; + deb_info("%s:\n", __func__); + ret = usb_register(&rtl28xxu_driver); + if (ret) + err("usb_register failed=%d", ret); + + return ret; +} + +static void __exit rtl28xxu_module_exit(void) +{ + deb_info("%s:\n", __func__); + /* deregister this driver from the USB subsystem */ + usb_deregister(&rtl28xxu_driver); +} + +module_init(rtl28xxu_module_init); +module_exit(rtl28xxu_module_exit); + +MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); +MODULE_AUTHOR("Antti Palosaari "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h new file mode 100644 index 000000000000..902cb8b09206 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -0,0 +1,210 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL28XXU_H +#define RTL28XXU_H + +#define DVB_USB_LOG_PREFIX "rtl28xxu" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) + +#define deb_dump(r, t, v, i, b, l, func) { \ + int loop_; \ + func("%02x %02x %02x %02x %02x %02x %02x %02x", \ + t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ + if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ + func(" >>> "); \ + else \ + func(" <<< "); \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +/* + * USB commands + * (usb_control_msg() index parameter) + */ +#define DEMOD (0x00 << 8) +#define USB (0x01 << 8) +#define SYS (0x02 << 8) +#define I2C (0x03 << 8) +#define CMD_WR_FLAG 0x10 +#define CMD_DEMOD_RD (DEMOD) +#define CMD_DEMOD_WR (DEMOD | CMD_WR_FLAG) +#define CMD_USB_RD (USB) +#define CMD_USB_WR (USB | CMD_WR_FLAG) +#define CMD_SYS_RD (SYS) +#define CMD_SYS_WR (SYS | CMD_WR_FLAG) +#define CMD_I2C_RD (I2C) +#define CMD_I2C_WR (I2C | CMD_WR_FLAG) + +struct rtl28xxu_priv { + u8 chip_id; + u8 tuner; +}; + +enum rtl28xxu_chip_id { + CHIP_ID_NONE = 0, + CHIP_ID_RTL2831U, + CHIP_ID_RTL2832U, +}; + +enum rtl28xxu_tuner { + TUNER_NONE = 0, + TUNER_RTL2830_QT1010, + TUNER_RTL2830_MT2060, + TUNER_RTL2830_MXL5005S, +}; + +struct rtl28xxu_req { + u16 value; + u16 index; + u16 size; + u8 *data; +}; + +struct rtl28xxu_reg_val { + u16 reg; + u8 val; +}; + +/* + * memory map + * + * 0x0000 DEMOD : demodulator + * 0x2000 USB : SIE, USB endpoint, debug, DMA + * 0x3000 SYS : system + * 0xfc00 RC : remote controller (not RTL2831U) + */ + +/* + * USB registers + */ +/* SIE Control Registers */ +#define USB_SYSCTL 0x2000 /* USB system control */ +#define USB_SYSCTL_0 0x2000 /* USB system control */ +#define USB_SYSCTL_1 0x2001 /* USB system control */ +#define USB_SYSCTL_2 0x2002 /* USB system control */ +#define USB_SYSCTL_3 0x2003 /* USB system control */ +#define USB_IRQSTAT 0x2008 /* SIE interrupt status */ +#define USB_IRQEN 0x200C /* SIE interrupt enable */ +#define USB_CTRL 0x2010 /* USB control */ +#define USB_STAT 0x2014 /* USB status */ +#define USB_DEVADDR 0x2018 /* USB device address */ +#define USB_TEST 0x201C /* USB test mode */ +#define USB_FRAME_NUMBER 0x2020 /* frame number */ +#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */ +#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */ +#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */ +/* Endpoint Registers */ +#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */ +#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */ +#define USB_EP0_CFG 0x2104 /* EP 0 configure */ +#define USB_EP0_CTL 0x2108 /* EP 0 control */ +#define USB_EP0_STAT 0x210C /* EP 0 status */ +#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */ +#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */ +#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */ +#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */ +#define USB_EPA_CFG 0x2144 /* EP A configure */ +#define USB_EPA_CFG_0 0x2144 /* EP A configure */ +#define USB_EPA_CFG_1 0x2145 /* EP A configure */ +#define USB_EPA_CFG_2 0x2146 /* EP A configure */ +#define USB_EPA_CFG_3 0x2147 /* EP A configure */ +#define USB_EPA_CTL 0x2148 /* EP A control */ +#define USB_EPA_CTL_0 0x2148 /* EP A control */ +#define USB_EPA_CTL_1 0x2149 /* EP A control */ +#define USB_EPA_CTL_2 0x214A /* EP A control */ +#define USB_EPA_CTL_3 0x214B /* EP A control */ +#define USB_EPA_STAT 0x214C /* EP A status */ +#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */ +#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */ +#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */ +#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */ +#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */ +#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */ +/* Debug Registers */ +#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */ +#define USB_TOUT_VAL 0x2F08 /* USB time-out time */ +#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */ +#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */ +#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */ +#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */ +#define USB_UTMI_TST 0x2F80 /* UTMI test */ +#define USB_UTMI_STATUS 0x2F84 /* UTMI status */ +#define USB_TSTCTL 0x2F88 /* test control */ +#define USB_TSTCTL2 0x2F8C /* test control 2 */ +#define USB_PID_FORCE 0x2F90 /* force PID */ +#define USB_PKTERR_CNT 0x2F94 /* packet error counter */ +#define USB_RXERR_CNT 0x2F98 /* RX error counter */ +#define USB_MEM_BIST 0x2F9C /* MEM BIST test */ +#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */ +#define USB_CNTTEST 0x2FA4 /* counter test */ +#define USB_PHYTST 0x2FC0 /* USB PHY test */ +#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */ +#define USB_DBGMUX 0x2FF4 /* debug signal module mux */ + +/* + * SYS registers + */ +/* demod control registers */ +#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */ +#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */ +/* GPIO registers */ +#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */ +#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */ +#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */ +#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */ +#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */ +#define SYS_SYSINTE 0x3005 /* system interrupt enable */ +#define SYS_SYSINTS 0x3006 /* system interrupt status */ +#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ +#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ +#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ +/* IrDA registers */ +#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ +#define SYS_IRRC_PER 0x3024 /* IR protocol extension */ +#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */ +#define SYS_IRRC_DPIR 0x302C /* IR data package interval */ +#define SYS_IRRC_CR 0x3030 /* IR control */ +#define SYS_IRRC_RP 0x3034 /* IR read port */ +#define SYS_IRRC_SR 0x3038 /* IR status */ +/* I2C master registers */ +#define SYS_I2CCR 0x3040 /* I2C clock */ +#define SYS_I2CMCR 0x3044 /* I2C master control */ +#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */ +#define SYS_I2CMSR 0x304C /* I2C master status */ +#define SYS_I2CMFR 0x3050 /* I2C master FIFO */ + +#endif -- 2.20.1