From 251f4fe224d6c5399e71b57ab175db3b783dbca0 Mon Sep 17 00:00:00 2001 From: Min Li Date: Tue, 8 Dec 2020 10:41:54 -0500 Subject: [PATCH] ptp: clockmatrix: reset device and check BOOT_STATUS SM_RESET device only when loading full configuration and check for BOOT_STATUS. Also remove polling for write trigger done in _idtcm_settime(). Changes since v1: -Correct warnings from strict checkpatch Signed-off-by: Min Li Acked-by: Richard Cochran Link: https://lore.kernel.org/r/1607442117-13661-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski --- drivers/ptp/idt8a340_reg.h | 1 + drivers/ptp/ptp_clockmatrix.c | 150 ++++++++++++++++++++++++++-------- drivers/ptp/ptp_clockmatrix.h | 9 +- 3 files changed, 124 insertions(+), 36 deletions(-) diff --git a/drivers/ptp/idt8a340_reg.h b/drivers/ptp/idt8a340_reg.h index b297c4aba2ba..a664dfe5fd2f 100644 --- a/drivers/ptp/idt8a340_reg.h +++ b/drivers/ptp/idt8a340_reg.h @@ -103,6 +103,7 @@ #define SM_RESET_CMD 0x5A #define GENERAL_STATUS 0xc014 +#define BOOT_STATUS 0x0000 #define HW_REV_ID 0x000A #define BOND_ID 0x000B #define HW_CSR_ID 0x000C diff --git a/drivers/ptp/ptp_clockmatrix.c b/drivers/ptp/ptp_clockmatrix.c index 663255774c0b..0ccda22f067a 100644 --- a/drivers/ptp/ptp_clockmatrix.c +++ b/drivers/ptp/ptp_clockmatrix.c @@ -33,6 +33,43 @@ module_param(firmware, charp, 0); #define SETTIME_CORRECTION (0) +static int contains_full_configuration(const struct firmware *fw) +{ + s32 full_count = FULL_FW_CFG_BYTES - FULL_FW_CFG_SKIPPED_BYTES; + struct idtcm_fwrc *rec = (struct idtcm_fwrc *)fw->data; + s32 count = 0; + u16 regaddr; + u8 loaddr; + s32 len; + + /* If the firmware contains 'full configuration' SM_RESET can be used + * to ensure proper configuration. + * + * Full configuration is defined as the number of programmable + * bytes within the configuration range minus page offset addr range. + */ + for (len = fw->size; len > 0; len -= sizeof(*rec)) { + regaddr = rec->hiaddr << 8; + regaddr |= rec->loaddr; + + loaddr = rec->loaddr; + + rec++; + + /* Top (status registers) and bottom are read-only */ + if (regaddr < GPIO_USER_CONTROL || regaddr >= SCRATCH) + continue; + + /* Page size 128, last 4 bytes of page skipped */ + if ((loaddr > 0x7b && loaddr <= 0x7f) || loaddr > 0xfb) + continue; + + count++; + } + + return (count >= full_count); +} + static long set_write_phase_ready(struct ptp_clock_info *ptp) { struct idtcm_channel *channel = @@ -261,6 +298,53 @@ static int idtcm_write(struct idtcm *idtcm, return _idtcm_rdwr(idtcm, module + regaddr, buf, count, true); } +static int clear_boot_status(struct idtcm *idtcm) +{ + int err; + u8 buf[4] = {0}; + + err = idtcm_write(idtcm, GENERAL_STATUS, BOOT_STATUS, buf, sizeof(buf)); + + return err; +} + +static int read_boot_status(struct idtcm *idtcm, u32 *status) +{ + int err; + u8 buf[4] = {0}; + + err = idtcm_read(idtcm, GENERAL_STATUS, BOOT_STATUS, buf, sizeof(buf)); + + *status = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + + return err; +} + +static int wait_for_boot_status_ready(struct idtcm *idtcm) +{ + u32 status = 0; + u8 i = 30; /* 30 * 100ms = 3s */ + int err; + + do { + err = read_boot_status(idtcm, &status); + + if (err) + return err; + + if (status == 0xA0) + return 0; + + msleep(100); + i--; + + } while (i); + + dev_warn(&idtcm->client->dev, "%s timed out\n", __func__); + + return -EBUSY; +} + static int _idtcm_gettime(struct idtcm_channel *channel, struct timespec64 *ts) { @@ -670,7 +754,7 @@ static int _idtcm_set_dpll_scsr_tod(struct idtcm_channel *channel, if (err) return err; - if (cmd == 0) + if ((cmd & TOD_WRITE_SELECTION_MASK) == 0) break; if (++count > 20) { @@ -684,39 +768,16 @@ static int _idtcm_set_dpll_scsr_tod(struct idtcm_channel *channel, } static int _idtcm_settime(struct idtcm_channel *channel, - struct timespec64 const *ts, - enum hw_tod_write_trig_sel wr_trig) + struct timespec64 const *ts) { struct idtcm *idtcm = channel->idtcm; int err; - int i; - u8 trig_sel; - - err = _idtcm_set_dpll_hw_tod(channel, ts, wr_trig); - - if (err) - return err; - - /* Wait for the operation to complete. */ - for (i = 0; i < 10000; i++) { - err = idtcm_read(idtcm, channel->hw_dpll_n, - HW_DPLL_TOD_CTRL_1, &trig_sel, - sizeof(trig_sel)); - - if (err) - return err; - if (trig_sel == 0x4a) - break; - - err = 1; - } + err = _idtcm_set_dpll_hw_tod(channel, ts, HW_TOD_WR_TRIG_SEL_MSB); if (err) { dev_err(&idtcm->client->dev, - "Failed at line %d in func %s!\n", - __LINE__, - __func__); + "%s: Set HW ToD failed\n", __func__); return err; } @@ -891,7 +952,7 @@ static int _idtcm_adjtime(struct idtcm_channel *channel, s64 delta) ts = ns_to_timespec64(now); - err = _idtcm_settime(channel, &ts, HW_TOD_WR_TRIG_SEL_MSB); + err = _idtcm_settime(channel, &ts); } return err; @@ -899,13 +960,31 @@ static int _idtcm_adjtime(struct idtcm_channel *channel, s64 delta) static int idtcm_state_machine_reset(struct idtcm *idtcm) { - int err; u8 byte = SM_RESET_CMD; + u32 status = 0; + int err; + u8 i; + + clear_boot_status(idtcm); err = idtcm_write(idtcm, RESET_CTRL, SM_RESET, &byte, sizeof(byte)); - if (!err) - msleep_interruptible(POST_SM_RESET_DELAY_MS); + if (!err) { + for (i = 0; i < 30; i++) { + msleep_interruptible(100); + read_boot_status(idtcm, &status); + + if (status == 0xA0) { + dev_dbg(&idtcm->client->dev, + "SM_RESET completed in %d ms\n", + i * 100); + break; + } + } + + if (!status) + dev_err(&idtcm->client->dev, "Timed out waiting for CM_RESET to complete\n"); + } return err; } @@ -1099,7 +1178,7 @@ static int idtcm_load_firmware(struct idtcm *idtcm, rec = (struct idtcm_fwrc *) fw->data; - if (fw->size > 0) + if (contains_full_configuration(fw)) idtcm_state_machine_reset(idtcm); for (len = fw->size; len > 0; len -= sizeof(*rec)) { @@ -1379,7 +1458,7 @@ static int idtcm_settime(struct ptp_clock_info *ptp, mutex_lock(&idtcm->reg_lock); - err = _idtcm_settime(channel, ts, HW_TOD_WR_TRIG_SEL_MSB); + err = _idtcm_settime(channel, ts); if (err) dev_err(&idtcm->client->dev, @@ -1810,7 +1889,7 @@ static int idtcm_enable_tod(struct idtcm_channel *channel) if (err) return err; - return _idtcm_settime(channel, &ts, HW_TOD_WR_TRIG_SEL_MSB); + return _idtcm_settime(channel, &ts); } static void idtcm_display_version_info(struct idtcm *idtcm) @@ -2102,6 +2181,9 @@ static int idtcm_probe(struct i2c_client *client, dev_warn(&idtcm->client->dev, "loading firmware failed with %d\n", err); + if (wait_for_boot_status_ready(idtcm)) + dev_warn(&idtcm->client->dev, "BOOT_STATUS != 0xA0\n"); + if (idtcm->tod_mask) { for (i = 0; i < MAX_TOD; i++) { if (idtcm->tod_mask & (1 << i)) { diff --git a/drivers/ptp/ptp_clockmatrix.h b/drivers/ptp/ptp_clockmatrix.h index 82840d72364a..713e41a09f3c 100644 --- a/drivers/ptp/ptp_clockmatrix.h +++ b/drivers/ptp/ptp_clockmatrix.h @@ -53,9 +53,14 @@ #define OUTPUT_MODULE_FROM_INDEX(index) (OUTPUT_0 + (index) * 0x10) -#define PEROUT_ENABLE_OUTPUT_MASK (0xdeadbeef) +#define PEROUT_ENABLE_OUTPUT_MASK (0xdeadbeef) -#define IDTCM_MAX_WRITE_COUNT (512) +#define IDTCM_MAX_WRITE_COUNT (512) + +#define FULL_FW_CFG_BYTES (SCRATCH - GPIO_USER_CONTROL) +#define FULL_FW_CFG_SKIPPED_BYTES (((SCRATCH >> 7) \ + - (GPIO_USER_CONTROL >> 7)) \ + * 4) /* 4 bytes skipped every 0x80 */ /* Values of DPLL_N.DPLL_MODE.PLL_MODE */ enum pll_mode { -- 2.20.1