From 1e4428b6dba9b683dc2ec0a56ed7879de3200cce Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 30 Aug 2021 23:30:46 +0530 Subject: [PATCH] octeontx2-af: Set proper errorcode for IPv4 checksum errors With current config, for packets with IPv4 checksum errors, errorcode is being set to UNKNOWN. Hence added a separate errorcodes for outer and inner IPv4 checksum and changed NPC configuration accordingly. Also turn on L2 multicast address check in NPC protocol check block. Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation") Signed-off-by: Sunil Goutham Signed-off-by: Subbaraya Sundeep Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 4d94bd03a516..5efb4174e82d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -2020,14 +2020,15 @@ int rvu_npc_init(struct rvu *rvu) /* Enable below for Rx pkts. * - Outer IPv4 header checksum validation. - * - Detect outer L2 broadcast address and set NPC_RESULT_S[L2M]. + * - Detect outer L2 broadcast address and set NPC_RESULT_S[L2B]. + * - Detect outer L2 multicast address and set NPC_RESULT_S[L2M]. * - Inner IPv4 header checksum validation. * - Set non zero checksum error code value */ rvu_write64(rvu, blkaddr, NPC_AF_PCK_CFG, rvu_read64(rvu, blkaddr, NPC_AF_PCK_CFG) | - BIT_ULL(32) | BIT_ULL(24) | BIT_ULL(6) | - BIT_ULL(2) | BIT_ULL(1)); + ((u64)NPC_EC_OIP4_CSUM << 32) | (NPC_EC_IIP4_CSUM << 24) | + BIT_ULL(7) | BIT_ULL(6) | BIT_ULL(2) | BIT_ULL(1)); rvu_npc_setup_interfaces(rvu, blkaddr); -- 2.20.1