From 0a0689933404c50f9ee2122b69b4be83e984afa2 Mon Sep 17 00:00:00 2001 From: Louis Yu Date: Tue, 1 Aug 2017 15:28:32 +0800 Subject: [PATCH] thermal: mediatek: extend calibration data for mt2712 chip This patch adds support for mt2712 chip thermal calibration data and calculation, and is compatible with the existing chips. Signed-off-by: Louis Yu Reviewed-by: Dawei Chien Signed-off-by: Zhang Rui --- drivers/thermal/mtk_thermal.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index e35d28d4e8f8..b609589698c7 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -112,10 +112,10 @@ /* * Layout of the fuses providing the calibration data - * These macros could be used for both MT8173, MT2701, and MT2712. - * MT8173 has five sensors and need five VTS calibration data, - * and MT2701 has three sensors and need three VTS calibration data, - * and MT2712 has four sensors and need four VTS calibration data. + * These macros could be used for MT8173, MT2701, and MT2712. + * MT8173 has 5 sensors and needs 5 VTS calibration data. + * MT2701 has 3 sensors and needs 3 VTS calibration data. + * MT2712 has 4 sensors and needs 4 VTS calibration data. */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) @@ -126,6 +126,8 @@ #define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) #define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) #define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) +#define MT8173_CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1) +#define MT8173_CALIB_BUF1_ID(x) (((x) >> 9) & 0x1) /* MT2701 thermal sensors */ #define MT2701_TS1 0 @@ -609,7 +611,11 @@ static int mtk_thermal_get_calibration_data(struct device *dev, mt->vts[MT8173_TS4] = MT8173_CALIB_BUF2_VTS_TS4(buf[2]); mt->vts[MT8173_TSABB] = MT8173_CALIB_BUF2_VTS_TSABB(buf[2]); mt->degc_cali = MT8173_CALIB_BUF0_DEGC_CALI(buf[0]); - mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + if (MT8173_CALIB_BUF1_ID(buf[1]) & + MT8173_CALIB_BUF0_O_SLOPE_SIGN(buf[0])) + mt->o_slope = -MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + else + mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); } else { dev_info(dev, "Device not calibrated, using default calibration values\n"); } -- 2.20.1