From 52d9edbe6efc5042cf57fae6a25d07572ddf398b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 8 Oct 2020 21:35:38 +0200 Subject: [PATCH] ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of the STM32MP15xx, however on the production SoM this was changed to pin PG0 to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared with the button, make the button polled. Fixes: 87cabf9405cb ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 5dff24e39af8..9a0a59678097 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -46,6 +46,16 @@ linux,code = ; gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; }; + + /* + * The EXTi IRQ line 0 is shared with PMIC, + * so mark this as polled GPIO key. + */ + button-2 { + label = "TA3-GPIO-C"; + linux,code = ; + gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -59,13 +69,6 @@ wakeup-source; }; - button-2 { - label = "TA3-GPIO-C"; - linux,code = ; - gpios = <&gpioi 11 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - button-3 { label = "TA4-GPIO-D"; linux,code = ; -- 2.20.1