drm/i915: Move engine->submit_request selection to a vfunc

It turns out that we may want to restore the original
engine->submit_request (and engine->schedule) callbacks from more than
just the guc <-> execlists transition. Move this to a vfunc so we can
have a common interface.

v2: Move initial selection to intel_engines_init_common(), repaint vfunc
with engine->set_default_submission (and a similar colour for the
helper).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-2-chris@chris-wilson.co.uk

drm/i915: Split I915_RESET_IN_PROGRESS into two flags

I915_RESET_IN_PROGRESS is being used for both signaling the requirement
to i915_mutex_lock_interruptible() to avoid taking the struct_mutex and
to instruct a waiter (already holding the struct_mutex) to perform the
reset. To allow for a little more coordination, split these two meaning
into a couple of distinct flags. I915_RESET_BACKOFF tells
i915_mutex_lock_interruptible() not to acquire the mutex and
I915_RESET_HANDOFF tells the waiter to call i915_reset().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-1-chris@chris-wilson.co.uk

drm/i915: make context status notifier head be per engine

GVTg has introduced the context status notifier to schedule the GVTg
workload. At that time, the notifier is bound to GVTg context only,
so GVTg is not aware of host workloads.

Now we are going to improve GVTg's guest workload scheduler policy,
and add Guc emulation support for new Gen graphics. Both these two
features require acknowledgment for all contexts running on hardware.
(But will not alter host workload.) So here try to make some change.

The change is simple:
  1. Move the context status notifier head from i915_gem_context to
     intel_engine_cs. Which means there is a notifier head per engine
     instead of per context. Execlist driver still call notifier for
     each context sched-in/out events of current engine.
  2. At GVTg side, it binds a notifier_block for each physical engine
     at GVTg initialization period. Then GVTg can hear all context
     status events.

In this patch, GVTg do nothing for host context event, but later
will add a function there. But in any case, the notifier callback is
a noop if this is no active vGPU.

Since intel_gvt_init() is called at early initialization stage and
require the status notifier head has been initiated, I initiate it in
intel_engine_setup().

v2: remove a redundant newline. (chris)

Fixes: 3c7ba6359d70 ("drm/i915: Introduce execlist context status change notification")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/scheduler: emulate a scheduler for guc

This emulates execlists on top of the GuC in order to defer submission of
requests to the hardware. This deferral allows time for high priority
requests to gazump their way to the head of the queue, however it nerfs
the GuC by converting it back into a simple execlist (where the CPU has
to wake up after every request to feed new commands into the GuC).

v2: Drop hack status - though iirc there is still a lockdep inversion
between fence and engine->timeline->lock (which is impossible as the
nesting only occurs on different fences - hopefully just requires some
judicious lockdep annotation)
v3: Apply lockdep nesting to enabling signaling on the request, using
the pattern we already have in __i915_gem_request_submit();
v4: Replaying requests after a hang also now needs the timeline
spinlock, to disable the interrupts at least
v5: Hold wq lock for completeness, and emit a tracepoint for enabling signal
v6: Reorder interrupt checking for a happier gcc.
v7: Only signal the tasklet after a user-interrupt if using guc scheduling
v8: Restore lost update of rq through the i915_guc_irq_handler (Tvrtko)
v9: Avoid re-initialising the engine->irq_tasklet from inside a reset
v10: Hook up the execlists-style tracepoints
v11: Clear the execlists irq_posted bit after taking over the interrupt/tasklet

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316125619.6856-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915: Replace irq_seqno_barrier on hws write with a clflush

When manually overwriting the HWS, rather than assume irq_seqno_barrier
does the right thing, we can explicitly flush the cacheline instead.
This avoids us calling the engine->irq_seqno_barrier() from an illegal
context:

[ 1472.651797] BUG: scheduling while atomic: migration/0/11/0x00000002
[ 1472.651807] Modules linked in: ctr ccm arc4 snd_hda_codec_hdmi bnep rfcomm iwldvm snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel mac80211 snd_hda_codec snd_hda_core snd_pcm dm_multipath snd_hwdep intel_powerclamp coretemp snd_seq_midi crct10dif_pclmul snd_seq_midi_event crc32_pclmul iwlwifi ghash_clmulni_intel btusb snd_rawmidi btrtl aesni_intel btbcm aes_x86_64 crypto_simd btintel cryptd glue_helper bluetooth snd_seq cfg80211 snd_timer snd_seq_device intel_ips binfmt_misc snd mei_me soundcore mei dm_mirror dm_region_hash dm_log i915 intel_gtt i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea prime_numbers e1000e drm ahci libahci
[ 1472.651897] CPU: 0 PID: 11 Comm: migration/0 Tainted: G     U          4.11.0-rc1+ #203
[ 1472.651899] Hardware name: LENOVO 514328U/514328U, BIOS 6QET44WW (1.14 ) 04/20/2010
[ 1472.651900] Call Trace:
[ 1472.651913]  dump_stack+0x63/0x90
[ 1472.651922]  __schedule_bug+0x5d/0x6b
[ 1472.651930]  __schedule+0x46a/0x5f0
[ 1472.651934]  schedule+0x38/0x90
[ 1472.651938]  schedule_hrtimeout_range_clock+0x85/0x110
[ 1472.651945]  ? hrtimer_init+0x10/0x10
[ 1472.651949]  schedule_hrtimeout_range+0xe/0x10
[ 1472.651952]  usleep_range+0x4d/0x60
[ 1472.652037]  gen5_seqno_barrier+0x13/0x20 [i915]
[ 1472.652101]  intel_engine_init_global_seqno+0xd7/0x160 [i915]
[ 1472.652160]  __i915_gem_set_wedged_BKL+0xa0/0x180 [i915]
[ 1472.652166]  multi_cpu_stop+0xbb/0xe0
[ 1472.652170]  ? cpu_stop_queue_work+0x90/0x90
[ 1472.652174]  cpu_stopper_thread+0x82/0x110
[ 1472.652179]  smpboot_thread_fn+0x137/0x190
[ 1472.652184]  kthread+0xf7/0x130
[ 1472.652187]  ? sort_range+0x20/0x20
[ 1472.652191]  ? kthread_park+0x90/0x90
[ 1472.652195]  ret_from_fork+0x2c/0x40

Testcase: igt/gem_eio #ilk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314111452.9375-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Use coarse grained residency counter with byt

Set byt rc residency counters high level as chv does by
default. We lose some accuracy on byt but we can do the calculation
without extra hw read on both platforms, as now they behave
identically in this respect.

v2: use ktime
v3: keep comparison u32 (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1489592584-10422-1-git-send-email-mika.kuoppala@intel.com

drm/i915: Use ktime to calculate rc0 residency

We have used cz timestamp register to gain a reference time wrt
to residency calculations. The residency counts are in cz clk ticks
(333Mhz clock) but for some reason the cz timestamp register gives
100us units. Perhaps for some other usage, the base-ten based values
are easier, but in residency calculations raw units would have been
the easiest.

As there is not much advantage of using base-ten clock through
a more costly punit access, take our reference times directly from
kernel clock.

v2: use ktime (Chris, Ville)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Convert debugfs to use generic residency calculator

Use intel_rc6_residency to get benefit for increased resolution
in byt/chv.

v2: output raw and time (Chris)

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Extend vlv/chv residency resolution

Vlv and chv residency counters are 40 bits in width.
With a control bit, we can choose between upper or lower
32 bit window into this counter.

Lets toggle this bit on and off on and read both parts.
As a result we can push the wrap from 13 seconds to 54
minutes.

v2: commit msg, loop readability, goto elimination (Chris)
v3: bug ref, divide outside runtime pm lock (Chris)

References: https://bugs.freedesktop.org/show_bug.cgi?id=94852
Reported-by: Len Brown <len.brown@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Return residency as microseconds

Change the granularity from milliseconds to microseconds
when returning rc6 residencies. This is in preparation
for increased resolution on some platforms.

v2: use 64bit div macro (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Move residency calculation into intel_pm.c

Plan is to make generic residency calculation utility
function for usage outside of sysfs. As a first step
move residency calculation into intel_pm.c

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/userptr: Reinvent GGTT self-faulting protection

lockdep doesn't like us taking the mm->mmap_sem inside the get_pages
callback for a couple of reasons. The straightforward deadlock:

[13755.434059] =============================================
[13755.434061] [ INFO: possible recursive locking detected ]
[13755.434064] 4.11.0-rc1-CI-CI_DRM_297+ #1 Tainted: G     U
[13755.434066] ---------------------------------------------
[13755.434068] gem_userptr_bli/8398 is trying to acquire lock:
[13755.434070]  (&mm->mmap_sem){++++++}, at: [<ffffffffa00c988a>] i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434096]
               but task is already holding lock:
[13755.434098]  (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560
[13755.434105]
               other info that might help us debug this:
[13755.434108]  Possible unsafe locking scenario:

[13755.434110]        CPU0
[13755.434111]        ----
[13755.434112]   lock(&mm->mmap_sem);
[13755.434115]   lock(&mm->mmap_sem);
[13755.434117]
                *** DEADLOCK ***

[13755.434121]  May be due to missing lock nesting notation

[13755.434126] 2 locks held by gem_userptr_bli/8398:
[13755.434128]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560
[13755.434135]  #1:  (&obj->mm.lock){+.+.+.}, at: [<ffffffffa00b887d>] __i915_gem_object_get_pages+0x1d/0x70 [i915]
[13755.434156]
               stack backtrace:
[13755.434161] CPU: 3 PID: 8398 Comm: gem_userptr_bli Tainted: G     U          4.11.0-rc1-CI-CI_DRM_297+ #1
[13755.434165] Hardware name: GIGABYTE GB-BKi7(H)A-7500/MFLP7AP-00, BIOS F4 02/20/2017
[13755.434169] Call Trace:
[13755.434174]  dump_stack+0x67/0x92
[13755.434178]  __lock_acquire+0x133a/0x1b50
[13755.434182]  lock_acquire+0xc9/0x220
[13755.434200]  ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434204]  down_read+0x42/0x70
[13755.434221]  ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434238]  i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434255]  ____i915_gem_object_get_pages+0x25/0x60 [i915]
[13755.434272]  __i915_gem_object_get_pages+0x59/0x70 [i915]
[13755.434288]  i915_gem_fault+0x397/0x6a0 [i915]
[13755.434304]  ? i915_gem_fault+0x1a1/0x6a0 [i915]
[13755.434308]  ? __lock_acquire+0x449/0x1b50
[13755.434311]  ? __lock_acquire+0x449/0x1b50
[13755.434315]  ? vm_mmap_pgoff+0xa9/0xd0
[13755.434318]  __do_fault+0x19/0x70
[13755.434321]  __handle_mm_fault+0x863/0xe50
[13755.434325]  handle_mm_fault+0x17f/0x370
[13755.434329]  ? handle_mm_fault+0x40/0x370
[13755.434332]  __do_page_fault+0x279/0x560
[13755.434336]  do_page_fault+0xc/0x10
[13755.434339]  page_fault+0x22/0x30
[13755.434342] RIP: 0033:0x7f5ab91b5880
[13755.434345] RSP: 002b:00007fff62922218 EFLAGS: 00010216
[13755.434348] RAX: 0000000000b74500 RBX: 00007f5ab7f81000 RCX: 0000000000000000
[13755.434352] RDX: 0000000000100000 RSI: 00007f5ab7f81000 RDI: 00007f5aba61c000
[13755.434355] RBP: 00007f5aba61c000 R08: 0000000000000007 R09: 0000000100000000
[13755.434359] R10: 000000000000037d R11: 00007f5ab91b5840 R12: 0000000000000001
[13755.434362] R13: 0000000000000005 R14: 0000000000000001 R15: 0000000000000000

and cyclic deadlocks:

[ 2566.458979] ======================================================
[ 2566.459054] [ INFO: possible circular locking dependency detected ]
[ 2566.459127] 4.11.0-rc1+ #26 Not tainted
[ 2566.459194] -------------------------------------------------------
[ 2566.459266] gem_streaming_w/759 is trying to acquire lock:
[ 2566.459334]  (&obj->mm.lock){+.+.+.}, at: [<ffffffffa034bc80>] i915_gem_object_pin_pages+0x0/0xc0 [i915]
[ 2566.459605]
[ 2566.459605] but task is already holding lock:
[ 2566.459699]  (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500
[ 2566.459814]
[ 2566.459814] which lock already depends on the new lock.
[ 2566.459814]
[ 2566.459934]
[ 2566.459934] the existing dependency chain (in reverse order) is:
[ 2566.460030]
[ 2566.460030] -> #1 (&mm->mmap_sem){++++++}:
[ 2566.460139]        lock_acquire+0xfe/0x220
[ 2566.460214]        down_read+0x4e/0x90
[ 2566.460444]        i915_gem_userptr_get_pages+0x6e/0x340 [i915]
[ 2566.460669]        ____i915_gem_object_get_pages+0x8b/0xd0 [i915]
[ 2566.460900]        __i915_gem_object_get_pages+0x6a/0x80 [i915]
[ 2566.461132]        __i915_vma_do_pin+0x7fa/0x930 [i915]
[ 2566.461352]        eb_add_vma+0x67b/0x830 [i915]
[ 2566.461572]        eb_lookup_vmas+0xafe/0x1010 [i915]
[ 2566.461792]        i915_gem_do_execbuffer+0x715/0x2870 [i915]
[ 2566.462012]        i915_gem_execbuffer2+0x106/0x2b0 [i915]
[ 2566.462152]        drm_ioctl+0x36c/0x670 [drm]
[ 2566.462236]        do_vfs_ioctl+0x12c/0xa60
[ 2566.462317]        SyS_ioctl+0x41/0x70
[ 2566.462399]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2566.462477]
[ 2566.462477] -> #0 (&obj->mm.lock){+.+.+.}:
[ 2566.462587]        __lock_acquire+0x1602/0x1790
[ 2566.462661]        lock_acquire+0xfe/0x220
[ 2566.462893]        i915_gem_object_pin_pages+0x4c/0xc0 [i915]
[ 2566.463116]        i915_gem_fault+0x2c2/0x8c0 [i915]
[ 2566.463197]        __do_fault+0x42/0x130
[ 2566.463276]        __handle_mm_fault+0x92c/0x1280
[ 2566.463356]        handle_mm_fault+0x1e2/0x440
[ 2566.463443]        __do_page_fault+0x1c4/0x500
[ 2566.463529]        do_page_fault+0xc/0x10
[ 2566.463613]        page_fault+0x1f/0x30
[ 2566.463693]
[ 2566.463693] other info that might help us debug this:
[ 2566.463693]
[ 2566.463820]  Possible unsafe locking scenario:
[ 2566.463820]
[ 2566.463918]        CPU0                    CPU1
[ 2566.463988]        ----                    ----
[ 2566.464068]   lock(&mm->mmap_sem);
[ 2566.464143]                                lock(&obj->mm.lock);
[ 2566.464226]                                lock(&mm->mmap_sem);
[ 2566.464304]   lock(&obj->mm.lock);
[ 2566.464378]
[ 2566.464378]  *** DEADLOCK ***
[ 2566.464378]
[ 2566.464504] 1 lock held by gem_streaming_w/759:
[ 2566.464576]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500
[ 2566.464699]
[ 2566.464699] stack backtrace:
[ 2566.464801] CPU: 0 PID: 759 Comm: gem_streaming_w Not tainted 4.11.0-rc1+ #26
[ 2566.464881] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016
[ 2566.464983] Call Trace:
[ 2566.465061]  dump_stack+0x68/0x9f
[ 2566.465144]  print_circular_bug+0x20b/0x260
[ 2566.465234]  __lock_acquire+0x1602/0x1790
[ 2566.465323]  ? debug_check_no_locks_freed+0x1a0/0x1a0
[ 2566.465564]  ? i915_gem_object_wait+0x238/0x650 [i915]
[ 2566.465657]  ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
[ 2566.465749]  lock_acquire+0xfe/0x220
[ 2566.465985]  ? i915_sg_trim+0x1b0/0x1b0 [i915]
[ 2566.466223]  i915_gem_object_pin_pages+0x4c/0xc0 [i915]
[ 2566.466461]  ? i915_sg_trim+0x1b0/0x1b0 [i915]
[ 2566.466699]  i915_gem_fault+0x2c2/0x8c0 [i915]
[ 2566.466939]  ? i915_gem_pwrite_ioctl+0xce0/0xce0 [i915]
[ 2566.467030]  ? __lock_acquire+0x642/0x1790
[ 2566.467122]  ? __lock_acquire+0x642/0x1790
[ 2566.467209]  ? debug_lockdep_rcu_enabled+0x35/0x40
[ 2566.467299]  ? get_unmapped_area+0x1b4/0x1d0
[ 2566.467387]  __do_fault+0x42/0x130
[ 2566.467474]  __handle_mm_fault+0x92c/0x1280
[ 2566.467564]  ? __pmd_alloc+0x1e0/0x1e0
[ 2566.467651]  ? vm_mmap_pgoff+0x160/0x190
[ 2566.467740]  ? handle_mm_fault+0x111/0x440
[ 2566.467827]  handle_mm_fault+0x1e2/0x440
[ 2566.467914]  ? handle_mm_fault+0x5d/0x440
[ 2566.468002]  __do_page_fault+0x1c4/0x500
[ 2566.468090]  do_page_fault+0xc/0x10
[ 2566.468180]  page_fault+0x1f/0x30
[ 2566.468263] RIP: 0033:0x557895ced32a
[ 2566.468337] RSP: 002b:00007fffd6dd8a10 EFLAGS: 00010202
[ 2566.468419] RAX: 00007f659a4db000 RBX: 0000000000000003 RCX: 00007f659ad032da
[ 2566.468501] RDX: 0000000000000000 RSI: 0000000000100000 RDI: 0000000000000000
[ 2566.468586] RBP: 0000000000000007 R08: 0000000000000003 R09: 0000000100000000
[ 2566.468667] R10: 0000000000000001 R11: 0000000000000246 R12: 0000557895ceda60
[ 2566.468749] R13: 0000000000000001 R14: 00007fffd6dd8ac0 R15: 00007f659a4db000

By checking the status of the gup worker (serialized by the
obj->mm.lock) we can determine whether it is still active, has failed or
has succeeded. If the worker is still active (or failed), we know that
it cannot be bound and so we can skip taking struct_mutex (risking
potential recursion). As we check the worker status, we mark it to
discard any partial results, forcing us to restart on the next
get_pages.

Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Fixes: 1c8782dd313e ("drm/i915/userptr: Disallow wrapping GTT into a userptr")
Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup
Testcase: igt/gem_userptr_blits/dmabuf-sync
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315140150.19432-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Make intel_uc_sanitize_options() more robust

After negative guc fw selection we could leave guc
submission flag still turned on. Reorder some checks
to cover this case. While here, fix info message and
return early if there is no Guc.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
[tursulin: fixup bad alignment]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133741.150420-1-michal.wajdeczko@intel.com

drm/i915/uc: Rename intel_uc_fw.fw to .type

This field is used to determine which kind of firmware the struct
describes (GuC/HuC) - the name does not reflect.

The enum used here have "type" in the name, so let's go with that.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com

drm/i915/breadcrumbs: Tweak commentary

Tvrtko spotted a stale reference to b->lock (now b->rb_lock) so review
the comments and try to improve them in passing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315222259.1469-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Only attempt to signal the request once from the interrupt handler

Check that request has not been signaled before acquiring a reference to
the request for signaling later in the interrupt handler.

The loading of the cacheline (for request->fence.flags) should be "free"
when followed by the locked increment of the request->fence.refcount
(which then sets the cacheline to exclusive mode), i.e. the cost of
test_bit prior to an atomic_inc should be negligible. This should
benefit us when we have a pile of bare breadcrumbs (interrupted execbuf)
where we may get interrupts faster than we can get rid of the
intel_wait, or if the device is too slow to run the bottom-half between
interrupts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-5-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Assert that we do not shortcut the current bottom-half

We need to ensure that we always serialize updates to the bottom-half
using the breadcrumbs.irq_lock so that we don't race with a concurrent
interrupt handler. This is most important just prior to leaving the
waiter (when the intel_wait will be overwritten), so make sure we are
not the current bottom-half when skipping the irq locks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-4-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Disable interrupt bottom-half first on idling

Before walking the rbtree of waiters (marking them as complete and waking
them), decouple the interrupt handler. This prevents a race between the
missed waiter waking up and removing its intel_wait (which skips
checking the lock) and the interrupt handler dereferencing the
intel_wait. (Though we do not expect to encounter waiters during idle!)

Fixes: e1c0c91bdaec ("drm/i915: Wake up all waiters before idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-3-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Update bottom-half before marking as complete

When adding a new request to the breadcrumb rbtree, we mark all those
requests inside the rbtree that are already completed as complete. This
wakes those waiters up and allows them to skip the spinlock before
returning to userspace. If one of those is the current bottom-half and
allocated its intel_wait on the stack, it may then overwrite the
b->irq_wait upon exiting i915_wait_request() just as the interrupt handler
dereferences it.

Fixes: 56299fb7d904 ("drm/i915: Signal first fence from irq handler if complete")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-2-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Use booleans for intel_breadcrumbs_busy()

Since commit 9b6586ae9f6b ("drm/i915: Keep a global seqno per-engine")
converted intel_breadcrumbs_busy() to reporting a single boolean, we
need only compute a boolean internally (and not needlessly compute the
flag).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-1-chris@chris-wilson.co.uk

drm/i915: Extend rpm wakelock during i915_handle_error()

We take the runtime pm wakelock during i915_handle_error() to ensure
that all paths that reach the error handler keep the device awake during
the hw reads. However, we need to extend that from the reset handler to
include the earlier capture routines.

Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314171840.25706-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915/guc: Use formalized struct definition for ads object

Manual pointer manipulation is error prone. Let compiler calculate
right offsets for us in case we need to change ads layout.

v2: don't call it object (Chris)
v3: restyle offset assignments (Chris)
v4: stylistic reductions

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314133309.126432-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/uc: Add params for specifying firmware

`guc_firmware_path` and `huc_firmware_path` module parameters are added.

Using the parameter disables version checks and loads desired firmware
instead of the default one.

v2: make params unsafe && notice about disabled fw check (J. Lahtinen)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Separate firmware selection and preparation

intel_{h,g}uc_init_fw selects correct firmware and then triggers it's
preparation (fetch + initial parsing).

This change separates out select steps, so those can be called by
the sanitize_options().

Then, during the init_fw(), we prepare the firmware if the firmware was
selected.

Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Simplify firmware path handling

Currently fw->path values can represent one of three possible states:

 1) NULL - device without the uC
 2) '\0' - device with the uC but have no firmware
 3) else - device with the uC and we have firmware

Second case is used only to WARN at a later stage.

We can WARN right away and merge cases 1 and 2.

Code can be even further simplified and common (HuC/GuC logic) happening
right before the fetch can be offloaded to the common function.

v2: fewer temporary variables, more straightforward flow (M. Wajdeczko)
v3: DRM_ERROR instead of WARN (M. Wajdeczko)
v4: coding standard (J. Lahtinen)
v5: non-trivial rebase
v6: remove path check, we are checking fetch status (M. Wajdeczko)

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: Simplify intel_guc_init_hw()

Current version of intel_guc_init_hw() does a lot:
 - cares about submission
 - loads huc
 - implement WA

This change offloads some of the logic to intel_uc_init_hw(), which now
cares about the above.

v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko)
v3: rename once again
v4: remove spurious comments and add some style (J. Lahtinen)
v5: flow changes, got rid of dead checks (M. Wajdeczko)
v6: rebase
v7: rebase & onion teardown (J. Lahtinen)

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: Extract param logic form guc_init_fw()

Let intel_guc_init_fw() focus on determining and fetching the correct
firmware.

This patch introduces intel_uc_sanitize_options() that is called from
intel_sanitize_options().

Then, if we have GuC, we can call intel_guc_init_fw() conditionally
and we do not have to do the internal checks.

v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko)
v3: fix comment again, change the nuke message (M. Wajdeczko)
v4: update title to reflect new function name + rebase
v5: text && remove 2 uneccessary checks (M. Wajdeczko)

Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Introduce intel_uc_init_fw()

Instead of calling intel_guc_init() and intel_huc_init() one by one this
patch introduces intel_uc_init_fw() function that calls them both.

Called functions are renamed accordingly.

Trying to have subject_verb_object ordering and more descriptive names,
the intel_huc_init() and intel_guc_init() functions are renamed.

For guc_init():
 * `intel_guc` is the subject, so those functions now take intel_guc
   structure, instead of the dev_priv
 * init is the verb
 * fw is the object which better describes the function's role

huc_init() change follows the same reasoning.

v2: settle on intel_uc_fetch_fw name (M. Wajdeczko)
v3: yet another rename - intel_uc_init_fw (J. Lahtinen)
v4: non-trivial rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Move intel_uc_fw_fetch() to intel_uc.c

The file fits better.

Additionally rename it to intel_uc_prepare_fw(), as the function does
more than simple fetch.

`obj` cleanup in the function is also fixed (i.e. removed). In the fail
scenario it was always 'put' but there's no possible flow that
initializes the obj properly and then goes to the fail label.

v2: remove second declaration, reorder (M. Wajdeczko)
v3: non-trivial rebase
v4: remove obj cleanup in the fail scenario (C. Wilson)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Rename intel_?uc_{setup, load}() to _init_hw()

GuC historically has two "startup" functions called _init() and _setup()

Then HuC came with it's _init() and _load().

This commit renames intel_guc_setup() and intel_huc_load() to
*uc_init_hw() as they called from the i915_gem_init_hw().

The aim is to be consistent in that entry points called during
particular driver init phases (e.g. init_hw) are all suffixed by that
phase. When reading the leaf functions, it should be clear at what stage
during the driver load it is called and therefore what operations are
legal at that point.

Also, since the functions start with intel_guc and intel_huc they take
appropiate structure.

v2: commit message update (Chris Wilson)
v3: change taken parameters to be more "semantic" (M. Wajdeczko)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/huc: Add huc_to_i915

Used to obtain "dev_priv" from huc struct pointer.
We already have similar thing for guc.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/uc: Drop superfluous externs in intel_uc.h

Externs are implicit and we generally try to avoid them.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)

The rcu_barrier() takes the cpu_hotplug mutex which itself is not
reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker.

[  309.661373] =========================================================
[  309.661376] [ INFO: possible irq lock inversion dependency detected ]
[  309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G        W
[  309.661383] ---------------------------------------------------------
[  309.661386] gem_exec_gttfil/6435 just changed the state of lock:
[  309.661389]  (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160
[  309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[  309.661402]  (cpu_hotplug.lock){+.+.+.}
[  309.661404]

               and interrupts could create inverse lock ordering between them.

[  309.661410]
               other info that might help us debug this:
[  309.661414]  Possible interrupt unsafe locking scenario:

[  309.661417]        CPU0                    CPU1
[  309.661419]        ----                    ----
[  309.661421]   lock(cpu_hotplug.lock);
[  309.661425]                                local_irq_disable();
[  309.661432]                                lock(rcu_preempt_state.barrier_mutex);
[  309.661441]                                lock(cpu_hotplug.lock);
[  309.661446]   <Interrupt>
[  309.661448]     lock(rcu_preempt_state.barrier_mutex);
[  309.661453]
                *** DEADLOCK ***

[  309.661460] 4 locks held by gem_exec_gttfil/6435:
[  309.661464]  #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0
[  309.661475]  #1:  (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0
[  309.661486]  #2:  (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0
[  309.661495]  #3:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915]
[  309.661540]
               the shortest dependencies between 2nd lock and 1st lock:
[  309.661547]  -> (cpu_hotplug.lock){+.+.+.} ops: 829 {
[  309.661553]     HARDIRQ-ON-W at:
[  309.661560]                       __lock_acquire+0x5e5/0x1b50
[  309.661565]                       lock_acquire+0xc9/0x220
[  309.661572]                       __mutex_lock+0x6e/0x990
[  309.661576]                       mutex_lock_nested+0x16/0x20
[  309.661583]                       get_online_cpus+0x61/0x80
[  309.661590]                       kmem_cache_create+0x25/0x1d0
[  309.661596]                       debug_objects_mem_init+0x30/0x249
[  309.661602]                       start_kernel+0x341/0x3fe
[  309.661607]                       x86_64_start_reservations+0x2a/0x2c
[  309.661612]                       x86_64_start_kernel+0x173/0x186
[  309.661619]                       verify_cpu+0x0/0xfc
[  309.661622]     SOFTIRQ-ON-W at:
[  309.661627]                       __lock_acquire+0x611/0x1b50
[  309.661632]                       lock_acquire+0xc9/0x220
[  309.661636]                       __mutex_lock+0x6e/0x990
[  309.661641]                       mutex_lock_nested+0x16/0x20
[  309.661646]                       get_online_cpus+0x61/0x80
[  309.661650]                       kmem_cache_create+0x25/0x1d0
[  309.661655]                       debug_objects_mem_init+0x30/0x249
[  309.661660]                       start_kernel+0x341/0x3fe
[  309.661664]                       x86_64_start_reservations+0x2a/0x2c
[  309.661669]                       x86_64_start_kernel+0x173/0x186
[  309.661674]                       verify_cpu+0x0/0xfc
[  309.661677]     RECLAIM_FS-ON-W at:
[  309.661682]                          mark_held_locks+0x6f/0xa0
[  309.661687]                          lockdep_trace_alloc+0xb3/0x100
[  309.661693]                          kmem_cache_alloc_trace+0x31/0x2e0
[  309.661699]                          __smpboot_create_thread.part.1+0x27/0xe0
[  309.661704]                          smpboot_create_threads+0x61/0x90
[  309.661709]                          cpuhp_invoke_callback+0x9c/0x8a0
[  309.661713]                          cpuhp_up_callbacks+0x31/0xb0
[  309.661718]                          _cpu_up+0x7a/0xc0
[  309.661723]                          do_cpu_up+0x5f/0x80
[  309.661727]                          cpu_up+0xe/0x10
[  309.661734]                          smp_init+0x71/0xb3
[  309.661738]                          kernel_init_freeable+0x94/0x19e
[  309.661743]                          kernel_init+0x9/0xf0
[  309.661748]                          ret_from_fork+0x2e/0x40
[  309.661752]     INITIAL USE at:
[  309.661757]                      __lock_acquire+0x234/0x1b50
[  309.661761]                      lock_acquire+0xc9/0x220
[  309.661766]                      __mutex_lock+0x6e/0x990
[  309.661771]                      mutex_lock_nested+0x16/0x20
[  309.661775]                      get_online_cpus+0x61/0x80
[  309.661780]                      __cpuhp_setup_state+0x44/0x170
[  309.661785]                      page_alloc_init+0x23/0x3a
[  309.661790]                      start_kernel+0x124/0x3fe
[  309.661794]                      x86_64_start_reservations+0x2a/0x2c
[  309.661799]                      x86_64_start_kernel+0x173/0x186
[  309.661804]                      verify_cpu+0x0/0xfc
[  309.661807]   }
[  309.661813]   ... key      at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100
[  309.661817]   ... acquired at:
[  309.661821]    lock_acquire+0xc9/0x220
[  309.661825]    __mutex_lock+0x6e/0x990
[  309.661829]    mutex_lock_nested+0x16/0x20
[  309.661833]    get_online_cpus+0x61/0x80
[  309.661837]    _rcu_barrier+0x9f/0x160
[  309.661841]    rcu_barrier+0x10/0x20
[  309.661847]    netdev_run_todo+0x5f/0x310
[  309.661852]    rtnl_unlock+0x9/0x10
[  309.661856]    default_device_exit_batch+0x133/0x150
[  309.661862]    ops_exit_list.isra.0+0x4d/0x60
[  309.661866]    cleanup_net+0x1d8/0x2c0
[  309.661872]    process_one_work+0x1f4/0x6d0
[  309.661876]    worker_thread+0x49/0x4a0
[  309.661881]    kthread+0x107/0x140
[  309.661884]    ret_from_fork+0x2e/0x40

[  309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 {
[  309.661896]    HARDIRQ-ON-W at:
[  309.661901]                     __lock_acquire+0x5e5/0x1b50
[  309.661905]                     lock_acquire+0xc9/0x220
[  309.661910]                     __mutex_lock+0x6e/0x990
[  309.661914]                     mutex_lock_nested+0x16/0x20
[  309.661919]                     _rcu_barrier+0x31/0x160
[  309.661923]                     rcu_barrier+0x10/0x20
[  309.661928]                     netdev_run_todo+0x5f/0x310
[  309.661932]                     rtnl_unlock+0x9/0x10
[  309.661936]                     default_device_exit_batch+0x133/0x150
[  309.661941]                     ops_exit_list.isra.0+0x4d/0x60
[  309.661946]                     cleanup_net+0x1d8/0x2c0
[  309.661951]                     process_one_work+0x1f4/0x6d0
[  309.661955]                     worker_thread+0x49/0x4a0
[  309.661960]                     kthread+0x107/0x140
[  309.661964]                     ret_from_fork+0x2e/0x40
[  309.661968]    SOFTIRQ-ON-W at:
[  309.661972]                     __lock_acquire+0x611/0x1b50
[  309.661977]                     lock_acquire+0xc9/0x220
[  309.661981]                     __mutex_lock+0x6e/0x990
[  309.661986]                     mutex_lock_nested+0x16/0x20
[  309.661990]                     _rcu_barrier+0x31/0x160
[  309.661995]                     rcu_barrier+0x10/0x20
[  309.661999]                     netdev_run_todo+0x5f/0x310
[  309.662003]                     rtnl_unlock+0x9/0x10
[  309.662008]                     default_device_exit_batch+0x133/0x150
[  309.662013]                     ops_exit_list.isra.0+0x4d/0x60
[  309.662017]                     cleanup_net+0x1d8/0x2c0
[  309.662022]                     process_one_work+0x1f4/0x6d0
[  309.662027]                     worker_thread+0x49/0x4a0
[  309.662031]                     kthread+0x107/0x140
[  309.662035]                     ret_from_fork+0x2e/0x40
[  309.662039]    IN-RECLAIM_FS-W at:
[  309.662043]                        __lock_acquire+0x638/0x1b50
[  309.662048]                        lock_acquire+0xc9/0x220
[  309.662053]                        __mutex_lock+0x6e/0x990
[  309.662058]                        mutex_lock_nested+0x16/0x20
[  309.662062]                        _rcu_barrier+0x31/0x160
[  309.662067]                        rcu_barrier+0x10/0x20
[  309.662089]                        i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662109]                        i915_drop_caches_set+0x141/0x150 [i915]
[  309.662114]                        simple_attr_write+0xc7/0xe0
[  309.662119]                        full_proxy_write+0x4f/0x70
[  309.662124]                        __vfs_write+0x23/0x120
[  309.662128]                        vfs_write+0xc6/0x1f0
[  309.662133]                        SyS_write+0x44/0xb0
[  309.662138]                        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  309.662142]    INITIAL USE at:
[  309.662147]                    __lock_acquire+0x234/0x1b50
[  309.662151]                    lock_acquire+0xc9/0x220
[  309.662156]                    __mutex_lock+0x6e/0x990
[  309.662160]                    mutex_lock_nested+0x16/0x20
[  309.662165]                    _rcu_barrier+0x31/0x160
[  309.662169]                    rcu_barrier+0x10/0x20
[  309.662174]                    netdev_run_todo+0x5f/0x310
[  309.662178]                    rtnl_unlock+0x9/0x10
[  309.662183]                    default_device_exit_batch+0x133/0x150
[  309.662188]                    ops_exit_list.isra.0+0x4d/0x60
[  309.662192]                    cleanup_net+0x1d8/0x2c0
[  309.662197]                    process_one_work+0x1f4/0x6d0
[  309.662202]                    worker_thread+0x49/0x4a0
[  309.662206]                    kthread+0x107/0x140
[  309.662210]                    ret_from_fork+0x2e/0x40
[  309.662214]  }
[  309.662220]  ... key      at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780
[  309.662225]  ... acquired at:
[  309.662229]    check_usage_forwards+0x12b/0x130
[  309.662233]    mark_lock+0x360/0x6f0
[  309.662237]    __lock_acquire+0x638/0x1b50
[  309.662241]    lock_acquire+0xc9/0x220
[  309.662245]    __mutex_lock+0x6e/0x990
[  309.662249]    mutex_lock_nested+0x16/0x20
[  309.662253]    _rcu_barrier+0x31/0x160
[  309.662257]    rcu_barrier+0x10/0x20
[  309.662279]    i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662298]    i915_drop_caches_set+0x141/0x150 [i915]
[  309.662303]    simple_attr_write+0xc7/0xe0
[  309.662307]    full_proxy_write+0x4f/0x70
[  309.662311]    __vfs_write+0x23/0x120
[  309.662315]    vfs_write+0xc6/0x1f0
[  309.662319]    SyS_write+0x44/0xb0
[  309.662323]    entry_SYSCALL_64_fastpath+0x1c/0xb1

[  309.662329]
               stack backtrace:
[  309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G        W       4.11.0-rc1-CI-CI_DRM_2333+ #1
[  309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[  309.662348] Call Trace:
[  309.662354]  dump_stack+0x67/0x92
[  309.662359]  print_irq_inversion_bug.part.19+0x1a4/0x1b0
[  309.662365]  check_usage_forwards+0x12b/0x130
[  309.662369]  mark_lock+0x360/0x6f0
[  309.662374]  ? print_shortest_lock_dependencies+0x1a0/0x1a0
[  309.662379]  __lock_acquire+0x638/0x1b50
[  309.662383]  ? __mutex_unlock_slowpath+0x3e/0x2e0
[  309.662388]  ? trace_hardirqs_on+0xd/0x10
[  309.662392]  ? _rcu_barrier+0x31/0x160
[  309.662396]  lock_acquire+0xc9/0x220
[  309.662400]  ? _rcu_barrier+0x31/0x160
[  309.662404]  ? _rcu_barrier+0x31/0x160
[  309.662409]  __mutex_lock+0x6e/0x990
[  309.662412]  ? _rcu_barrier+0x31/0x160
[  309.662416]  ? _rcu_barrier+0x31/0x160
[  309.662421]  ? synchronize_rcu_expedited+0x35/0xb0
[  309.662426]  ? _raw_spin_unlock_irqrestore+0x52/0x60
[  309.662434]  mutex_lock_nested+0x16/0x20
[  309.662438]  _rcu_barrier+0x31/0x160
[  309.662442]  rcu_barrier+0x10/0x20
[  309.662464]  i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662484]  i915_drop_caches_set+0x141/0x150 [i915]
[  309.662489]  simple_attr_write+0xc7/0xe0
[  309.662494]  full_proxy_write+0x4f/0x70
[  309.662498]  __vfs_write+0x23/0x120
[  309.662503]  ? rcu_read_lock_sched_held+0x75/0x80
[  309.662507]  ? rcu_sync_lockdep_assert+0x2a/0x50
[  309.662512]  ? __sb_start_write+0x102/0x210
[  309.662516]  ? vfs_write+0x17d/0x1f0
[  309.662520]  vfs_write+0xc6/0x1f0
[  309.662524]  ? trace_hardirqs_on_caller+0xe7/0x200
[  309.662529]  SyS_write+0x44/0xb0
[  309.662533]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  309.662537] RIP: 0033:0x7f507eac24a0
[  309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0
[  309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005
[  309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c
[  309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230
[  309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0
[  309.662572]  ? __this_cpu_preempt_check+0x13/0x20

Fixes: 0eafec6d3244 ("drm/i915: Enable lockless lookup of request tracking via RCU")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

The 33rd entry in the pre-CSC gamma table in Geminilake can represent a
value of 1.0 as 17 bits fixed point with one integer bit. However, the
table was generated such that the value of 1.0 would be 0.ffff with
all the intervals scaled accordingly. For instance, 0.5 mapped to
0.7fff instead of 0.8000.

For a reason that is not clear to the author, the rounding seems to be
different when a cursor plane is used, leading to some seemingly random
failures of the kms_cursor_crc igt tests. The differences weren't
perceptible at 8bpc with images captured by a Chamelium device, but did
cause CRC mismatches.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310101835.29845-1-ander.conselvan.de.oliveira@intel.com

drm/i915: Merge pre/postclose hooks

There's really not a reason afaics that we can't just clean up
everything at the end, in the terminal postclose hook: Since this is
closing a file descriptor we know no one else can have a reference or
a thread doing something with that drm_file except the close code.
Ordering shouldn't matter, as long as we don't kfree before we clean
stuff up.

In the past this was more relevant when drivers still had to track and
clean up pending drm events, but that's all done by the core now.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch

Revert "drm/i915: Ignore panel type from OpRegion on SKL"

This reverts commit bb10d4ec3be4b069bfb61c60ca4f708f58f440f1.

Since commit c8ebfad7a063 ("drm/i915: Ignore OpRegion panel type except
on select machines") we ignore the OpRegion panel type except for
specific machines (handled via a DMI match), so having SKL explicitly
excluded from using the OpRegion panel type is redundant. So let's
remove the SKL check.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308143334.21216-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: annote drop_caches debugfs interface with lockdep

The trouble we have is that we can't really test all the shrinker
recursion stuff exhaustively in BAT because any kind of thrashing
stress test just takes too long.

But that leaves a really big gap open, since shrinker recursions are
one of the most annoying bugs. Now lockdep already has support for
checking allocation deadlocks:

- Direct reclaim paths are marked up with
  lockdep_set_current_reclaim_state() and
  lockdep_clear_current_reclaim_state().

- Any allocation paths are marked with lockdep_trace_alloc().

If we simply mark up our debugfs with the reclaim annotations, any
code and locks taken in there will automatically complete the picture
with any allocation paths we already have, as long as we have a simple
testcase in BAT which throws out a few objects using this interface.
Not stress test or thrashing needed at all.

v2: Need to EXPORT_SYMBOL_GPL to make it compile as a module.

v3: Fixup rebase fail (spotted by Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312205340.16202-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915/vbt: split out defaults that are set when there is no VBT

The main thing are the DDI ports. If there's a VBT that says there are
no outputs, we should trust that, and not have semi-random
defaults. Unfortunately, the defaults have resulted in some Chromebooks
without VBT to rely on this behaviour, so we split out the defaults for
the missing VBT case.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/95c26079ff640d43f53b944f17e9fc356b36daec.1489152288.git.jani.nikula@intel.com

drm/i915: Optimize VLV/CHV display FIFO updates

Use I915_{READ,WRITE}_FW() for updating the DSPARB registers on
VLV/CHV. This is less expesive as we can grab the uncore.lock across
the entire sequence of reads and writes instead of each register
access grabbing it.

This also allows us to eliminate the dsparb lock entirely as the
uncore.lock now effectively protects the contents of the DSPARB
registers.

v2: Add a note that interrupts are already disabled (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use I915_READ_FW for plane updates

Optimize the plane register accesses a little bit by grabbing
the uncore lock manually across the entire pile of accesses and
using I915_READ_FW().

This helps keep the pipe update vblank evade critical section
below our 100 usec deadline, particularly with lockdep enabled.
And in general we want to keep that critical section as short
as possible as it's executed with interrupts disabled.

Not all plane updates currently happen from within the vblank evade
critical section, so we must use the irqsave/irqrestore variants
of the spinlock functions in the plane hooks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Organize plane register writes into tighter bunches

Pull all the plane register writes closer together to avoid having
a lot of unrelated stuff in between them. This will make things more
clear once we'll grab the uncore lock around the entire bunch. Also
in the future we might even consider moving more of the register
value computation out from the plane update hooks. This should make
that easier to do.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: s/__raw_i915_read32/I915_READ_FW/ in the SKL+ scanline read w/a

Replace __raw_i915_read32() with I915_READ_FW() in the workaround for
the SKL+ scanline counter hardware fail. The two are the same thing
but everyone else uses I915_READ_FW() so let's follow suit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use I915_READ_FW in i915_get_vblank_counter()

Optimize the multi-register read in i915_get_vblank_counter() a little
bit by grabbing the uncore lock manually and using I915_READ_FW().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Reject HDMI 12bpc if the sink doesn't indicate support

Check that the sink really declared 12bpc support before we enable it.
This should not actually never happen since it's mandatory for HDMI
sinks to support 12bpc if they support any deep color modes. But
reality disagrees with the theory and there are actually sinks in
the wild that violate the spec.

v2: Fix the output_types check
    Update commit message to state that these things are in fact real

Cc: stable@vger.kernel.org
Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>

drm/i915: Extend rpm wakelock for debugfs/i915_drpc_info

i915_drpc_info missed covering a few register read with the runtime pm
wakelock. Be simple and cover the entire function with a single wakelock
so that new additions are not similarly missed in future.

  WARNING: CPU: 2 PID: 1334 at drivers/gpu/drm/i915/intel_drv.h:1743 gen6_read32+0x192/0x1e0 [i915]
  RPM wakelock ref not held during HW access
  Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver netconsole nfsd auth_rpcgss ipmi_watchdog ipmi_poweroff ipmi_devintf ipmi_msghandler overlay btrfs xor raid6_pq dm_mod sg sd_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ata_generic pata_acpi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel kvm_intel snd_hda_codec kvm eeepc_wmi irqbypass snd_hda_core crct10dif_pclmul crc32_pclmul crc32c_intel asus_wmi sparse_keymap ghash_clmulni_intel snd_hwdep i915 rfkill ppdev pcbc aesni_intel ata_piix crypto_simd glue_helper snd_pcm pata_via cryptd pcspkr snd_timer drm_kms_helper syscopyarea snd sysfillrect libata sysimgblt fb_sys_fops soundcore shpchp drm wmi parport_pc parport tpm_infineon video
  CPU: 2 PID: 1334 Comm: php5 Not tainted 4.10.0-rc8-01615-g1f58c8e #1
  Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 1002 04/01/2011
  Call Trace:
   dump_stack+0x63/0x8a
   __warn+0xcb/0xf0
   warn_slowpath_fmt+0x4f/0x60
   ? seq_vprintf+0x35/0x50
   gen6_read32+0x192/0x1e0 [i915]
   i915_drpc_info+0x55d/0x990 [i915]
   seq_read+0xf2/0x3b0
   full_proxy_read+0x51/0x80
   __vfs_read+0x28/0x130
   ? security_file_permission+0x9b/0xc0
   ? rw_verify_area+0x4e/0xb0
   vfs_read+0xa8/0x170
   SyS_read+0x46/0xa0
   entry_SYSCALL_64_fastpath+0x1a/0xa9
  RIP: 0033:0x7fd97bf175a0
  RSP: 002b:00007ffdf730db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 00007fd978028738 RCX: 00007fd97bf175a0
  RDX: 0000000000002000 RSI: 00007fd97740e0d8 RDI: 0000000000000005
  RBP: 0000000000000001 R08: 0000000000e97840 R09: 00007fd977ef8d58
  R10: 0000000000000027 R11: 0000000000000246 R12: 00007fd977ef8d58
  R13: 0000000000000000 R14: 0000000000eb4640 R15: 0000000000000000

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313095617.29010-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Inline gen6_sanitize_rps_pm_mask()

gen6_sanitize_rps_pm_mask() is small enough that inlining it shrinks the
object code.

v2: Use const markup

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312135426.2216-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/selftests: Catch error from mock_file()

The patch 791ff39ae32a: "drm/i915: Live testing for context
execution" from Feb 13, 2017, leads to the following static checker
warning:

        drivers/gpu/drm/i915/selftests/i915_gem_context.c:347 igt_ctx_exec()
        error: 'file' dereferencing possible ERR_PTR()

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 791ff39ae32a ("drm/i915: Live testing for context execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313124724.10614-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/selftests: Fix error path for ggtt walk_hole()

The patch 6e32ab3d4777: "drm/i915: Fill different pages of the GTT"
from Feb 13, 2017, leads to the following static checker warning:

        drivers/gpu/drm/i915/selftests/i915_gem_gtt.c:583 walk_hole()
        error: 'vma' dereferencing possible ERR_PTR()

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e32ab3d4777 ("drm/i915: Fill different pages of the GTT"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313100750.2685-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Move whole object to CPU domain for coherent shmem access

If the object is coherent, we can simply update the cache domain on the
whole object rather than calculate the before/after clflushes. The
advantage is that we then get correct tracking of ellided flushes when
changing coherency later.

Testcase: igt/gem_pwrite_snooped
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310000942.11661-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Rename REDIRECT_TO_GUC bit

The REDIRECT_TO_GUC bit is a strange beast as it is a disable bit -
setting the bit in the pm interrupt generation stops the interrupt going
to the guc (not sending it to the guc as the name implies). To help the
reader rename it to DISABLE_REDIRECT_TO_GUC so that we keep the bspec
greppable name without it being as confusing!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312132745.9618-1-chris@chris-wilson.co.uk
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>

drm/i915: Use new atomic iterator macros in cdclk

Calculating the max pixel rate requires the new state, so use it there.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489071125-917-6-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use new atomic iterator macros in display code

Add a big fat warning in __intel_display_resume that the old state is
invalid, and use the correct state everywhere.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489071125-917-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Change one occurence of conn_state to new_conn_state in
             verify_connector_state, and drop old_conn_state there]

drm/i915: Use new atomic iterator macros in wm code

The watermark code needs to look at the new allocations, so use
for_each_new_crtc_in_state everywhere.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489071125-917-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use new atomic iterator macros in fbc

Use for_each_new_plane_in_state, only the new state is needed.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489071125-917-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use new atomic iterator macros in ddi

Use for_each_new_connector_in_state instead of for_each_connector_in_state.
Also make the function static, it's only used inside intel_ddi.c

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489071125-917-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/vbt: don't propagate errors from intel_bios_init()

We don't use the error return for anything other than reporting and
logging that there is no VBT. We can pull the logging in the function,
and remove the error status return. Moreover, if we needed the
information for something later on, we'd probably be better off storing
the bit in dev_priv, and using it where it's needed, instead of using
the error return.

While at it, improve the comments.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/438ebbb0d5f0d321c625065b9cc78532a1dab24f.1489152288.git.jani.nikula@intel.com

Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org/git/drm-intel into drm-intel-next-queued

Baytrail PMIC vs. PMU race fixes from Hans de Goede

This time the right version (v4), with the compile fix.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915/guc: Update rps.pm_intrmsk_mbz in guc_interrupts_capture/release

Different state is to be maintained for rps.pm_intrmsk_mbz for GuC and
Execlists. Updating it inside guc_interrupts_* routines as in those
routines GuC load/submission params are sanitized and it should not be set
based on HAS_GUC_SCHED during intel_irq_init.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489199821-6707-3-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: s/pm_intr_keep/pm_intrmsk_mbz

"pm_intr_keep" is not conveying the intent that it is bitmask
of interrupts that must be zero(mbz) in GEN6_PMINTRMSK.
Name it "pm_intrmsk_mbz".

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489199821-6707-2-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Release GuC interrupts in i915_guc_submission_disable

Like capture of GuC interrupts while enabling GuC submission, release
them while disabling GuC submission.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489199821-6707-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Defer unmasking RPS interrupts until after making adjustments

To make our adjustments to RPS requires taking a mutex and potentially
sleeping for an unknown duration - until we have completed our
adjustments further RPS interrupts are immaterial (they are based on
stale thresholds) and we can safely ignore them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Use max(render, media) for Baytrail busyness calculation

Currently, we sum the render and media cycles (on different engines) to
compute a percentage - but we fail to factor in the duplication into the
threshold calculations. This makes us very eager to upclock!

If we just consider the maximum busy cycles of either counter, we should
have an accurate reflection on whether there are cycles to spare to
handle the workload at this frequency.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-2-chris@chris-wilson.co.uk

drm/i915: Stop using RP_DOWN_EI on Baytrail

On Baytrail, we manually calculate busyness over the evaluation interval
to avoid issues with miscaluations with RC6 enabled. However, it turns
out that the DOWN_EI interrupt generator is completely bust - it
operates in two modes, continuous or never. Neither of which are
conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just
compute everything from the UP_EI which does seem to correspond to the
desired interval.

v2: Fixup gen6_rps_pm_mask() as well
v3: Inline vlv_c0_above() to combine the now identical elapsed
calculation for up/down and simplify the threshold testing

Fixes: 43cf3bf084ba ("drm/i915: Improved w/a for rps on Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Extend debugfs/i915_drop_caches to call i915_gem_shrink_all()

Sometimes we want to explicitly page out all available objects from igt,
i.e. call i915_gem_shrink_all() and check that subsequent operations
succeed. This adds DROP_SHRINK_ALL [0x8] to the set of flags for
debugfs/i915_drop_caches for that purpose.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308144622.23194-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/cmdparser: Limit clflush to active cachelines

We only need to clflush those cachelines that we have validated to be
read by the GPU. Userspace typically fills the batch length in
correctly, the exceptions tend to be explicit tests within igt.

v2: Use ptr_mask_bits() to make Mika happy
v3: cmd is not advanced on MI_BBE, so make sure to include an extra
dword in the clflush.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310115518.13832-1-chris@chris-wilson.co.uk

drm/i915: Fix forcewake active domain tracking

In commit 003342a50021 ("drm/i915: Keep track of active
forcewake domains in a bitmask") I forgot to adjust the
newly introduce fw_domains_active state across reset.

This caused the assert_forcewakes_inactive to trigger
during suspend and resume if there were user held
forcewakes.

v2: Bitmask checks are required since vfuncs are not
    always present.

v3: Move bitmask tracking to get/put vfunc for simplicity.
    (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 003342a50021 ("drm/i915: Keep track of active forcewake domains in a bitmask")
Testcase: igt/drv_suspend/forcewake
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Paneri, Praveen" <praveen.paneri@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: v4.10+ <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310093249.4484-1-tvrtko.ursulin@linux.intel.com

drm/i915: Remove intel_ prefix from encoder variables in intel_ddi.c

In I915 driver, there are many places where variable name for
intel_encoder object is given as 'intel_encoder' whereas it would
make more sense to call it just 'encoder' when possible.

This patch does this cleanup in file intel_ddi.c.

PS: There are few functions where both drm_encoder and intel_encoder
are present. For such functions, this patch does nothing.

Suggested-by: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489067021-4709-1-git-send-email-shashank.sharma@intel.com

drivers/gpu/drm/i915/selftests/i915_selftest.c: fix build with gcc-4.4.4

gcc-4.4.4 has issues with anonymous union initializers.

In file included from drivers/gpu/drm/i915/selftests/i915_selftest.c:68:
drivers/gpu/drm/i915/selftests/i915_mock_selftests.h:11: error: unknown field 'mock' specified in initializer
drivers/gpu/drm/i915/selftests/i915_mock_selftests.h:11: warning: missing braces around initializer
drivers/gpu/drm/i915/selftests/i915_mock_selftests.h:11: warning: (near initialization for 'mock_selftests[0].<anonymous>')
drivers/gpu/drm/i915/selftests/i915_mock_selftests.h:12: error: unknown field 'mock' specified in initializer
drivers/gpu/drm/i915/selftests/i915_mock_selftests.h:13: error: unknown field 'm
...

Work around this.

Fixes: 953c7f82eb89 ("drm/i915: Provide a hook for selftests")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310090314.3142-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Fix request re-submission after reset

In order to ensure no missed interrupts we must first re-direct
the interrupts to GuC, and only then re-submit the requests to
be replayed after a GPU reset. Otherwise context switch can fire
before GuC has been set up to receive it triggering more hangs.

v2: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309132005.1317-1-tvrtko.ursulin@linux.intel.com

drm/i915: Ignore skl+ for debugfs/i915_sr_status

There is no easily digestible single self-refresh status bit, so don't
report one for debugfs/i915_sr_status on gen9+. For the moment this
avoids a read of the non-existent WM1_LP_ILK register.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309142049.16033-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Initialize pm_intr_keep during intel_irq_init for GuC

Driver needs to ensure that it doesn't mask the PM interrupts, which are
unmasked/needed by GuC firmware. For that, Driver maintains a bitmask of
interrupts to be kept unmasked, pm_intr_keep.

pm_intr_keep was determined across GuC load. GuC gets loaded in different
scenarios and it is not going to change the pm_intr_keep so this patch
moves its setup to intel_irq_init.

This patch fixes incorrect RPS masking leading to UP interrupts triggered
even when at cur_freq=max and inversly for Down interrupts.

Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488862355-9768-1-git-send-email-sagar.a.kamble@intel.com

drm/i915: Nuke skl_update_plane debug message from the pipe update critical section

printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.

The problem has been there ever since commit c331879ce8ea ("drm/i915:
skylake sprite plane scaling using shared scalers.") but it may not have
been readily visible until commit e1edbd44e23b ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488974407-25175-1-git-send-email-maarten.lankhorst@linux.intel.com
Fixes: c331879ce8ea ("drm/i915: skylake sprite plane scaling using shared scalers")
Cc: <stable@vger.kernel.org> # v4.2+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Add missing tags, point to the correct offending commit]

drm/i915/selftests: exercise cache domain eviction

Add a selftest to exercise evicting neighbouring nodes that conflict due
to page colouring in the GTT.

v2: add a peppering of comments

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-4-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: use correct node for handling cache domain eviction

It looks like we were incorrectly comparing vma->node against itself
instead of the target node, when evicting for a node on systems where we
need guard pages between regions with different cache domains. As a
consequence we can end up trying to needlessly evict neighbouring nodes,
even if they have the same cache domain, and if they were pinned we
would fail the eviction.

Fixes: 625d988acc28 ("drm/i915: Extract reserving space in the GTT to a helper")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-3-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: don't leak the gem object

For our fake dma objects we can leak the underlying gem object if we
fail to pin our "backing storage".

[   39.952618] =============================================================================
[   39.952625] BUG mock_object (Tainted: G     U         ): Objects remaining in mock_object on __kmem_cache_shutdown()
[   39.952629] -----------------------------------------------------------------------------

[   39.952633] Disabling lock debugging due to kernel taint
[   39.952635] INFO: Slab 0xffffea00086c6a00 objects=21 used=1 fp=0xffff88021b1abc00 flags=0x5fff8000008100
[   39.952640] CPU: 1 PID: 1258 Comm: drv_selftest Tainted: G    BU          4.10.0+ #46
[   39.952641] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS MBP111.88Z.0138.B17.1602221718 02/22/2016
[   39.952642] Call Trace:
[   39.952648]  dump_stack+0x4d/0x6f
[   39.952651]  slab_err+0x9d/0xb0
[   39.952654]  ? ksm_migrate_page+0xe0/0xe0
[   39.952657]  ? on_each_cpu_cond+0x9a/0xc0
[   39.952658]  ? __kmalloc+0x1af/0x1c0
[   39.952660]  ? __kmem_cache_shutdown+0x173/0x3e0
[   39.952661]  __kmem_cache_shutdown+0x196/0x3e0
[   39.952664]  kmem_cache_destroy+0xa0/0x150
[   39.952708]  mock_device_release+0x113/0x140 [i915]
[   39.952726]  drm_dev_release+0x20/0x40 [drm]
[   39.952735]  drm_dev_unref+0x23/0x30 [drm]
[   39.952768]  i915_gem_gtt_mock_selftests+0x55/0x70 [i915]
[   39.952803]  __run_selftests+0x169/0x1c0 [i915]
[   39.952805]  ? 0xffffffffa0151000
[   39.952840]  i915_mock_selftests+0x30/0x60 [i915]
[   39.952869]  i915_init+0xc/0x78 [i915]
[   39.952870]  ? 0xffffffffa0151000
[   39.952872]  do_one_initcall+0x43/0x170
[   39.952874]  ? __vunmap+0x81/0xd0
[   39.952875]  ? kmem_cache_alloc_trace+0x37/0x170
[   39.952877]  ? do_init_module+0x27/0x1f8
[   39.952879]  do_init_module+0x5f/0x1f8
[   39.952881]  load_module+0x2423/0x29b0
[   39.952882]  ? __symbol_put+0x40/0x40
[   39.952885]  ? kernel_read_file+0x1a3/0x1c0
[   39.952887]  SYSC_finit_module+0xbc/0xf0
[   39.952889]  SyS_finit_module+0xe/0x10
[   39.952892]  entry_SYSCALL_64_fastpath+0x13/0x94

v2: use onion teardown and favour i915_gem_object_put

Fixes: 8d28ba4568f4 ("drm/i915: Exercise filling the top/bottom portions of the ppgtt")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-2-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/userptr: Disallow wrapping GTT into a userptr

If we allow the user to convert a GTT mmap address into a userptr, we
may end up in recursion hell, where currently we hit a mutex deadlock
but other possibilities include use-after-free during the
unbind/cancel_userptr.

[  143.203989] gem_userptr_bli D    0   902    898 0x00000000
[  143.204054] Call Trace:
[  143.204137]  __schedule+0x511/0x1180
[  143.204195]  ? pci_mmcfg_check_reserved+0xc0/0xc0
[  143.204274]  schedule+0x57/0xe0
[  143.204327]  schedule_timeout+0x383/0x670
[  143.204374]  ? trace_hardirqs_on_caller+0x187/0x280
[  143.204457]  ? trace_hardirqs_on_thunk+0x1a/0x1c
[  143.204507]  ? usleep_range+0x110/0x110
[  143.204657]  ? irq_exit+0x89/0x100
[  143.204710]  ? retint_kernel+0x2d/0x2d
[  143.204794]  ? trace_hardirqs_on_caller+0x187/0x280
[  143.204857]  ? _raw_spin_unlock_irq+0x33/0x60
[  143.204944]  wait_for_common+0x1f0/0x2f0
[  143.205006]  ? out_of_line_wait_on_atomic_t+0x170/0x170
[  143.205103]  ? wake_up_q+0xa0/0xa0
[  143.205159]  ? flush_workqueue_prep_pwqs+0x15a/0x2c0
[  143.205237]  wait_for_completion+0x1d/0x20
[  143.205292]  flush_workqueue+0x2e9/0xbb0
[  143.205339]  ? flush_workqueue+0x163/0xbb0
[  143.205418]  ? __schedule+0x533/0x1180
[  143.205498]  ? check_flush_dependency+0x1a0/0x1a0
[  143.205681]  i915_gem_userptr_mn_invalidate_range_start+0x1c7/0x270 [i915]
[  143.205865]  ? i915_gem_userptr_dmabuf_export+0x40/0x40 [i915]
[  143.205955]  __mmu_notifier_invalidate_range_start+0xc6/0x120
[  143.206044]  ? __mmu_notifier_invalidate_range_start+0x51/0x120
[  143.206123]  zap_page_range_single+0x1c7/0x1f0
[  143.206171]  ? unmap_single_vma+0x160/0x160
[  143.206260]  ? unmap_mapping_range+0xa9/0x1b0
[  143.206308]  ? vma_interval_tree_subtree_search+0x75/0xd0
[  143.206397]  unmap_mapping_range+0x18f/0x1b0
[  143.206444]  ? zap_vma_ptes+0x70/0x70
[  143.206524]  ? __pm_runtime_resume+0x67/0xa0
[  143.206723]  i915_gem_release_mmap+0x1ba/0x1c0 [i915]
[  143.206846]  i915_vma_unbind+0x5c2/0x690 [i915]
[  143.206925]  ? __lock_is_held+0x52/0x100
[  143.207076]  i915_gem_object_set_tiling+0x1db/0x650 [i915]
[  143.207236]  i915_gem_set_tiling_ioctl+0x1d3/0x3b0 [i915]
[  143.207377]  ? i915_gem_set_tiling_ioctl+0x5/0x3b0 [i915]
[  143.207457]  drm_ioctl+0x36c/0x670
[  143.207535]  ? debug_lockdep_rcu_enabled.part.0+0x1a/0x30
[  143.207730]  ? i915_gem_object_set_tiling+0x650/0x650 [i915]
[  143.207793]  ? drm_getunique+0x120/0x120
[  143.207875]  ? __handle_mm_fault+0x996/0x14a0
[  143.207939]  ? vm_insert_page+0x340/0x340
[  143.208028]  ? up_write+0x28/0x50
[  143.208086]  ? vm_mmap_pgoff+0x160/0x190
[  143.208163]  do_vfs_ioctl+0x12c/0xa60
[  143.208218]  ? debug_lockdep_rcu_enabled+0x35/0x40
[  143.208267]  ? ioctl_preallocate+0x150/0x150
[  143.208353]  ? __do_page_fault+0x36a/0x6e0
[  143.208400]  ? mark_held_locks+0x23/0xc0
[  143.208479]  ? up_read+0x1f/0x40
[  143.208526]  ? entry_SYSCALL_64_fastpath+0x5/0xc6
[  143.208669]  ? __fget_light+0xa7/0xc0
[  143.208747]  SyS_ioctl+0x41/0x70

To prevent the possibility of a deadlock, we defer scheduling the worker
until after we have proven that given the current mm, the userptr range
does not overlap a GGTT mmaping. If another thread tries to remap the
GGTT over the userptr before the worker is scheduled, it will be stopped
by its invalidate-range flushing the current work, before the deadlock
can occur.

v2: Improve discussion of how we end up in the deadlock.
v3: Don't forget to mark the userptr as active after a successful
gup_fast. Rename overlaps_ggtt to noncontiguous_or_overlaps_ggtt.
v4: Fix test ordering between invalid GTT mmaping and range completion
(Tvrtko)

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308215903.24171-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/userptr: Only flush the workqueue if required

To avoid waiting for work from other invalidate-range threads where
not required, only wait on the userptr cancel workqueue if we have added
some work to it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205851.32578-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/userptr: Deactivate a failed userptr if the worker reports an EFAULT

If the worker fails, it no longer has pages to release and can be
immediately removed from the invalidate-tree.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205851.32578-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Fix up verify_encoder_state

The trouble here is that looking at all connector->state in the
verifier isn't good, because that's run from the commit work, which
doesn't hold the connection_mutex. Which means we're only allowed to
look at states in our atomic update.

The simple fix for future proofing would be to switch over to
drm_for_each_connector_in_state, but that has the problem that the
verification then fails if not all connectors are in the state. And we
also need to be careful to check both old and new encoders, and not
screw things up when an encoder gets reassigned.

Note that this isn't the full fix, since we still look at
connector->state. To fix that, we need Maarten's patch series to
switch over to state pointers within drm_atomic_state, but that's a
different series.

v2: Use oldnew iterator (Maarten).

v3: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-6-daniel.vetter@ffwll.ch

drm/i915: use for_each_intel_connector_iter in intel_display.c

This gets rid of the last users of for_each_intel_connector(), remove
that too.

At first I wasn't sure whether the 2 loops in the modeset state
checker should instead only loop over the connectors in the atomic
commit. But we never add connectors to an atomic update if they don't
(or won't have) a CRTC assigned, which means there'd be a gap in check
coverage. Hence loop over everything on those too.

v2: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-5-daniel.vetter@ffwll.ch

drm/i915: Make intel_get_pipe_from_connector atomic

Drive-by fixup while looking at all the connector_list walkers -
holding connection_mutex does actually _not_ give you locking to look
at the legacy drm_connector->encoder->crtc pointer chain. That one is
solely owned by the atomic commit workers. Instead we must inspect the
atomic state.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-4-daniel.vetter@ffwll.ch

drm/i915: use drm_connector_list_iter in intel_opregion.c

One case where I nuked a now unecessary locking, otherwise all just
boring stuff.

v2: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-3-daniel.vetter@ffwll.ch

drm/i915: use drm_connector_list_iter in intel_hotplug.c

Nothing special, just rote conversion.

v2: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-2-daniel.vetter@ffwll.ch

drm/i915: Use drm_connector_list_iter in debugfs

While at it also try to reduce the locking a bit to what's really just
needed instead of everything that we could possibly lock.

Added a new for_each_intel_connector_iter which includes the cast to
intel_connector.

Otherwise just plain transformation with nothing special going on.

v2: Review from Maarten:
- Stick with modeset_lock_all in sink_crc, it looks at crtc->state.
- Fix up early loop exit in i915_displayport_test_active_write.

v3: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-1-daniel.vetter@ffwll.ch

drm/i915: Check for an invalid seqno before __i915_gem_request_started

__i915_gem_request_started() asserts that the seqno is valid, but
i915_spin_request() was not checking before querying whether the request
had started.

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Fixes: 754c9fd57649 ("drm/i915: Protect the request->global_seqno with the engine->timeline lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308142238.22994-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Purge i915_gem_object_is_dead()

i915_gem_object_is_dead() was a temporary lockdep aide whilst
transitioning to a new locking structure for obj->mm. Since commit
1233e2db199d ("drm/i915: Move object backing storage manipulation to its
own locking") it is now unused and should be removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-2-chris@chris-wilson.co.uk

drm/i915: Avoiding recursing on ww_mutex inside shrinker

We have to avoid taking ww_mutex inside the shrinker as we use it as a
plain mutex type and so need to avoid recursive deadlocks:

[  602.771969] =================================
[  602.771970] [ INFO: inconsistent lock state ]
[  602.771973] 4.10.0gpudebug+ #122 Not tainted
[  602.771974] ---------------------------------
[  602.771975] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[  602.771978] kswapd0/40 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  602.771979]  (reservation_ww_class_mutex){+.+.?.}, at: [<ffffffffa054680a>] i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772020] {RECLAIM_FS-ON-W} state was registered at:
[  602.772024]   mark_held_locks+0x76/0x90
[  602.772026]   lockdep_trace_alloc+0xb8/0xc0
[  602.772028]   __kmalloc_track_caller+0x5d/0x130
[  602.772031]   krealloc+0x89/0xb0
[  602.772033]   reservation_object_reserve_shared+0xaf/0xd0
[  602.772055]   i915_gem_do_execbuffer.isra.35+0x1413/0x18b0 [i915]
[  602.772075]   i915_gem_execbuffer2+0x10e/0x1d0 [i915]
[  602.772078]   drm_ioctl+0x291/0x480
[  602.772079]   do_vfs_ioctl+0x695/0x6f0
[  602.772081]   SyS_ioctl+0x3c/0x70
[  602.772084]   entry_SYSCALL_64_fastpath+0x18/0xad
[  602.772085] irq event stamp: 5197423
[  602.772088] hardirqs last  enabled at (5197423): [<ffffffff8116751d>] kfree+0xdd/0x170
[  602.772091] hardirqs last disabled at (5197422): [<ffffffff811674f9>] kfree+0xb9/0x170
[  602.772095] softirqs last  enabled at (5190992): [<ffffffff8107bfe1>] __do_softirq+0x221/0x280
[  602.772097] softirqs last disabled at (5190575): [<ffffffff8107c294>] irq_exit+0x64/0xc0
[  602.772099]
               other info that might help us debug this:
[  602.772100]  Possible unsafe locking scenario:

[  602.772101]        CPU0
[  602.772101]        ----
[  602.772102]   lock(reservation_ww_class_mutex);
[  602.772104]   <Interrupt>
[  602.772105]     lock(reservation_ww_class_mutex);
[  602.772107]
                *** DEADLOCK ***

[  602.772109] 2 locks held by kswapd0/40:
[  602.772110]  #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811337b5>] shrink_slab.constprop.62+0x35/0x280
[  602.772116]  #1:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0553957>] i915_gem_shrinker_lock+0x27/0x60 [i915]
[  602.772141]
               stack backtrace:
[  602.772144] CPU: 2 PID: 40 Comm: kswapd0 Not tainted 4.10.0gpudebug+ #122
[  602.772145] Hardware name: LENOVO 42433ZG/42433ZG, BIOS 8AET64WW (1.44 ) 07/26/2013
[  602.772147] Call Trace:
[  602.772151]  dump_stack+0x68/0xa1
[  602.772153]  print_usage_bug+0x1d4/0x1f0
[  602.772155]  mark_lock+0x390/0x530
[  602.772157]  ? print_irq_inversion_bug+0x200/0x200
[  602.772159]  __lock_acquire+0x405/0x1260
[  602.772181]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772183]  lock_acquire+0x60/0x80
[  602.772205]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772207]  mutex_lock_nested+0x69/0x760
[  602.772229]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772231]  ? kfree+0xdd/0x170
[  602.772253]  ? i915_gem_object_wait+0x163/0x410 [i915]
[  602.772255]  ? trace_hardirqs_on_caller+0x18d/0x1c0
[  602.772256]  ? trace_hardirqs_on+0xd/0x10
[  602.772278]  i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772300]  i915_gem_object_unbind+0x5e/0x130 [i915]
[  602.772323]  i915_gem_shrink+0x22d/0x3d0 [i915]
[  602.772347]  i915_gem_shrinker_scan+0x3f/0x80 [i915]
[  602.772349]  shrink_slab.constprop.62+0x1ad/0x280
[  602.772352]  shrink_node+0x52/0x80
[  602.772355]  kswapd+0x427/0x5c0
[  602.772358]  kthread+0x122/0x130
[  602.772360]  ? try_to_free_pages+0x270/0x270
[  602.772362]  ? kthread_stop+0x70/0x70
[  602.772365]  ret_from_fork+0x2e/0x40

v2: Add commentary about the pruning being opportunistic

Reported-by: Jan Nordholz <jckn@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99977#c10
Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-1-chris@chris-wilson.co.uk

drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages

DRM_UT_CORE generates way too much noise usually, so having the
framebuffer init failures use DRM_UT_CORE is a pain when trying to
find out the reason why you failed in creating a framebuffer.
Let's use DRM_UT_KMS for these debug messages instead.

v2: s/at less than/at most/ in the debug message (Imre)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-6-ville.syrjala@linux.intel.com

drm/i915: Pass the correct plane index to _intel_compute_tile_offset()

intel_fill_fb_info() should pass the correct plane index to
_intel_compute_tile_offset() once we start to care about the AUX
surface.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-5-ville.syrjala@linux.intel.com

drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane

To make life easier let's allow skl_plane_stride() to be called for the
AUX surface even when there is no AUX surface. Avoids special cases in
the callers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-4-ville.syrjala@linux.intel.com

drm/i915: Move nv12 chroma plane handling into intel_surf_alignment()

Let's try to keep the alignment requirements in one place, and so
towards that end let's move the AUX_DIST alignment handling into
intel_surf_alignment() alongside the main surface alignment stuff.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-3-ville.syrjala@linux.intel.com

drm/i915: Plumb drm_framebuffer into more places

Now that framebuffers can be used even before calling
drm_framebuffer_init() we can start to plumb them into more places,
instead of passing individual pieces for fb metadata.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-2-ville.syrjala@linux.intel.com

drm/i915: suppress atomic commit error message under gvt-g env

under virtualization enviroment, it is possible guest update pipe
registers across vblank intervals due to overhead of mmio traps or vm
schedule out. However, it is safe since those pipe update happen in
virual registers and will not be committed to hardware. suppress that
atomic commit error message under virtualization case to avoid
confusing user.

v2: per ville's comment: return early and against Maarten's patch
v3: coding style clean

Signed-off-by: Bing Niu <bing.niu@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489004043-15449-1-git-send-email-bing.niu@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Nuke debug messages from the pipe update critical section

printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.

The problem has been there ever since commit bfd16b2a23dc ("drm/i915:
Make updating pipe without modeset atomic.") but it may not have
been readily visible until commit e1edbd44e23b ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: bfd16b2a23dc ("drm/i915: Make updating pipe without modeset atomic.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205419.19447-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge drm-next to get at all the good stuff in drm-misc. We need
that because:

- drm_connector_list_iter conversion for i915 needs the core patches.
- Maarten's patches to use the new atomic state iterators also need
  the core patches.
- We need the new link status property to complete the DP retraining
  work, merging through 2 branches wasn't a good idea and we had to
  partially backtrack.
- Chris needs reservation_object_trylock and we want to roll out
  kref_read everywhere.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next

- Re-architecture of the code to handle proprietary fw, more abstracted
to support the multitude of differences that NVIDIA introduce
- Support in the said code for GP10x ACR and GR fw, giving acceleration
support \o/
- Fix for GTX 970 GPUs that are in an odd MMU configuration

* 'linux-4.12' of git://github.com/skeggsb/linux: (60 commits)
  drm/nouveau/fb/gf100-: rework ram detection
  drm/nouveau/fb/gm200: split ram implementation from gm107
  drm/nouveau/fb/gf108: split implementation from gf100
  drm/nouveau/fb/gf100-: modify constructors to allow more customisation
  drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
  drm/nouveau/i2c/g94-: return REPLY_M value on reads
  drm/nouveau/i2c: modify aux interface to return length actually transferred
  drm/nouveau/gp10x: enable secboot and GR
  drm/nouveau/gr/gp102: initial support
  drm/nouveau/falcon: support for gp10x msgqueue
  drm/nouveau/secboot: add gp102/gp104/gp106/gp107 support
  drm/nouveau/secboot: put HS code loading code into own file
  drm/nouveau/secboot: support for r375 ACR
  drm/nouveau/secboot: support for r367 ACR
  drm/nouveau/secboot: support for r364 ACR
  drm/nouveau/secboot: workaround bug when starting SEC2 firmware
  drm/nouveau/secboot: support standard NVIDIA HS binaries
  drm/nouveau/secboot: support for unload blob bootloader
  drm/nouveau/secboot: let callers interpret return value of blobs
  drm/nouveau/secboot: support for different load and unload falcons
  ...

Merge tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel into drm-next

4 weeks worth of stuff since I was traveling&lazy:

- lspcon improvements (Imre)
- proper atomic state for cdclk handling (Ville)
- gpu reset improvements (Chris)
- lots and lots of polish around fences, requests, waiting and
  everything related all over (both gem and modeset code), from Chris
- atomic by default on gen5+ minus byt/bsw (Maarten did the patch to
  flip the default, really this is a massive joint team effort)
- moar power domains, now 64bit (Ander)
- big pile of in-kernel unit tests for various gem subsystems (Chris),
  including simple mock objects for i915 device and and the ggtt
  manager.
- i915_gpu_info in debugfs, for taking a snapshot of the current gpu
  state. Same thing as i915_error_state, but useful if the kernel didn't
  notice something is stick. From Chris.
- bxt dsi fixes (Umar Shankar)
- bxt w/a updates (Jani)
- no more struct_mutex for gem object unreference (Chris)
- some execlist refactoring (Tvrtko)
- color manager support for glk (Ander)
- improve the power-well sync code to better take over from the
  firmware (Imre)
- gem tracepoint polish (Tvrtko)
- lots of glk fixes all around (Ander)
- ctx switch improvements (Chris)
- glk dsi support&fixes (Deepak M)
- dsi fixes for vlv and clanups, lots of them (Hans de Goede)
- switch to i915.ko types in lots of our internal modeset code (Ander)
- byt/bsw atomic wm update code, yay (Ville)

* tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits)
  drm/i915: Update DRIVER_DATE to 20170306
  drm/i915: Don't use enums for hardware engine id
  drm/i915: Split breadcrumbs spinlock into two
  drm/i915: Refactor wakeup of the next breadcrumb waiter
  drm/i915: Take reference for signaling the request from hardirq
  drm/i915: Add FIFO underrun tracepoints
  drm/i915: Add cxsr toggle tracepoint
  drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints
  drm/i915: Add plane update/disable tracepoints
  drm/i915: Kill level 0 wm hack for VLV/CHV
  drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun
  drm/i915: Sanitize VLV/CHV watermarks properly
  drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms
  drm/i915: Nuke crtc->wm.cxsr_allowed
  drm/i915: Compute proper intermediate wms for vlv/cvh
  drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed
  drm/i915: Compute vlv/chv wms the atomic way
  drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks
  drm/i915: Plop vlv/chv fifo sizes into crtc state
  drm/i915: Plop vlv wm state into crtc_state
  ...

drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl

Before we instantiate/pin the backing store for our use, we
can prepopulate the shmemfs filp efficiently using a write into the
pagecache. We avoid the penalty of instantiating all the pages, important
if the user is just writing to a few and never uses the object on the GPU,
and using a direct write into shmemfs allows it to avoid the cost of
retrieving a page (mostly the clear-before-use, but in theory we could
curtail swapin) before it is overwritten.

This can be extended later to provide additional specialisation for
other backends (other than shmemfs). For now it provides a defense
against very large write-only allocations from exhausting all of system
memory.

v2: Smelling fixes.

Fixes: fe115628d567 ("drm/i915: Implement pwrite without struct-mutex")
References: https://bugs.freedesktop.org/show_bug.cgi?id=99107
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307120338.7277-2-chris@chris-wilson.co.uk

drm/i915: Store a permanent error in obj->mm.pages

Once the object has been truncated, it is unrecoverable. To facilitate
detection of this state store the error in obj->mm.pages.

This is required for the next patch which should be applied to v4.10
(via stable), so we also need to mark this patch for backporting. In
that regard, let's consider this to be a fix/improvement too.

v2: Avoid dereferencing the ERR_PTR when freeing the object.

Fixes: 1233e2db199d ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170307132031.32461-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: move the {skl, bxt}_{i, uni}nit_cdclk declarations

Move the {skl,bxt}_{i,uni}nit_cdclk declarations to the place where
the intel_cdclk.c functions are declared since these functions have
moved there.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487712207-17181-1-git-send-email-paulo.r.zanoni@intel.com