git.monstr.eu Git - linux-2.6-microblaze.git/log

kvm: x86: fix RSM when PCID is non-zero

rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then
CR4 & ~PCIDE, then CR0, then CR4.

However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier
in the long run to replace rsm_enter_protected_mode() with an emulator
callback that sets all the special registers (like KVM_SET_SREGS would
do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-arm-fixes-for-v4.15-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM Fixes for v4.15, Round 2

Fixes:
- A bug in our handling of SPE state for non-vhe systems
- A bug that causes hyp unmapping to go off limits and crash the system on
shutdown
- Three timer fixes that were introduced as part of the timer optimizations
for v4.15

KVM: Fix stack-out-of-bounds read in write_mmio

Reported by syzkaller:

  BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm]
  Read of size 8 at addr ffff8803259df7f8 by task syz-executor/32298

  CPU: 6 PID: 32298 Comm: syz-executor Tainted: G           OE    4.15.0-rc2+ #18
  Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
  Call Trace:
   dump_stack+0xab/0xe1
   print_address_description+0x6b/0x290
   kasan_report+0x28a/0x370
   write_mmio+0x11e/0x270 [kvm]
   emulator_read_write_onepage+0x311/0x600 [kvm]
   emulator_read_write+0xef/0x240 [kvm]
   emulator_fix_hypercall+0x105/0x150 [kvm]
   em_hypercall+0x2b/0x80 [kvm]
   x86_emulate_insn+0x2b1/0x1640 [kvm]
   x86_emulate_instruction+0x39a/0xb90 [kvm]
   handle_exception+0x1b4/0x4d0 [kvm_intel]
   vcpu_enter_guest+0x15a0/0x2640 [kvm]
   kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm]
   kvm_vcpu_ioctl+0x479/0x880 [kvm]
   do_vfs_ioctl+0x142/0x9a0
   SyS_ioctl+0x74/0x80
   entry_SYSCALL_64_fastpath+0x23/0x9a

The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall)
to the guest memory, however, write_mmio tracepoint always prints 8 bytes
through *(u64 *)val since kvm splits the mmio access into 8 bytes. This
leaks 5 bytes from the kernel stack (CVE-2017-17741).  This patch fixes
it by just accessing the bytes which we operate on.

Before patch:

syz-executor-5567  [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f

After patch:

syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: arm/arm64: Fix timer enable flow

When enabling the timer on the first run, we fail to ever restore the
state and mark it as loaded. That means, that in the initial entry to
the VCPU ioctl, unless we exit to userspace for some reason such as a
pending signal, if the guest programs a timer and blocks, we will wait
forever, because we never read back the hardware state (the loaded flag
is not set), and so we think the timer is disabled, and we never
schedule a background soft timer.

The end result? The VCPU blocks forever, and the only solution is to
kill the thread.

Fixes: 4a2c4da1250d ("arm/arm64: KVM: Load the timer state when enabling the timer")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state

The recent timer rework was assuming that once the timer was disabled,
we should no longer see any interrupts from the timer. This assumption
turns out to not be true, and instead we have to handle the case when
the timer ISR runs even after the timer has been disabled.

This requires a couple of changes:

First, we should never overwrite the cached guest state of the timer
control register when the ISR runs, because KVM may have disabled its
timers when doing vcpu_put(), even though the guest still had the timer
enabled.

Second, we shouldn't assume that the timer is actually firing just
because we see an interrupt, but we should check the actual state of the
timer in the timer control register to understand if the hardware timer
is really firing or not.

We also add an ISB to vtimer_save_state() to ensure the timer is
actually disabled once we enable interrupts, which should clarify the
intention of the implementation, and reduce the risk of unwanted
interrupts.

Fixes: b103cc3f10c0 ("KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Reported-by: Jia He <hejianet@gmail.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC

If we don't have a usable GIC, do not try to set the vcpu affinity
as this is guaranteed to fail.

Reported-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm/arm64: Fix HYP unmapping going off limits

When we unmap the HYP memory, we try to be clever and unmap one
PGD at a time. If we start with a non-PGD aligned address and try
to unmap a whole PGD, things go horribly wrong in unmap_hyp_range
(addr and end can never match, and it all goes really badly as we
keep incrementing pgd and parse random memory as page tables...).

The obvious fix is to let unmap_hyp_range do what it does best,
which is to iterate over a range.

The size of the linear mapping, which begins at PAGE_OFFSET, can be
easily calculated by subtracting PAGE_OFFSET form high_memory, because
high_memory is defined as the linear map address of the last byte of
DRAM, plus one.

The size of the vmalloc region is given trivially by VMALLOC_END -
VMALLOC_START.

Cc: stable@vger.kernel.org
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu

When VHE is not present, KVM needs to save and restores PMSCR_EL1 when
possible. If SPE is used by the host, value of PMSCR_EL1 cannot be saved
for the guest.
If the host starts using SPE between two save+restore on the same vcpu,
restore will write the value of PMSCR_EL1 read during the first save.

Make sure __debug_save_spe_nvhe clears the value of the saved PMSCR_EL1
when the guest cannot use SPE.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM/x86: Check input paging mode when cs.l is set

Reported by syzkaller:
    WARNING: CPU: 0 PID: 27962 at arch/x86/kvm/emulate.c:5631 x86_emulate_insn+0x557/0x15f0 [kvm]
    Modules linked in: kvm_intel kvm [last unloaded: kvm]
    CPU: 0 PID: 27962 Comm: syz-executor Tainted: G    B   W        4.15.0-rc2-next-20171208+ #32
    Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.01.03.0006.040720161253 04/07/2016
    RIP: 0010:x86_emulate_insn+0x557/0x15f0 [kvm]
    RSP: 0018:ffff8807234476d0 EFLAGS: 00010282
    RAX: 0000000000000000 RBX: ffff88072d0237a0 RCX: ffffffffa0065c4d
    RDX: 1ffff100e5a046f9 RSI: 0000000000000003 RDI: ffff88072d0237c8
    RBP: ffff880723447728 R08: ffff88072d020000 R09: ffffffffa008d240
    R10: 0000000000000002 R11: ffffed00e7d87db3 R12: ffff88072d0237c8
    R13: ffff88072d023870 R14: ffff88072d0238c2 R15: ffffffffa008d080
    FS:  00007f8a68666700(0000) GS:ffff880802200000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000002009506c CR3: 000000071fec4005 CR4: 00000000003626f0
    Call Trace:
     x86_emulate_instruction+0x3bc/0xb70 [kvm]
     ? reexecute_instruction.part.162+0x130/0x130 [kvm]
     vmx_handle_exit+0x46d/0x14f0 [kvm_intel]
     ? trace_event_raw_event_kvm_entry+0xe7/0x150 [kvm]
     ? handle_vmfunc+0x2f0/0x2f0 [kvm_intel]
     ? wait_lapic_expire+0x25/0x270 [kvm]
     vcpu_enter_guest+0x720/0x1ef0 [kvm]
     ...

When CS.L is set, vcpu should run in the 64 bit paging mode.
Current kvm set_sregs function doesn't have such check when
userspace inputs sreg values. This will lead unexpected behavior.
This patch is to add checks for CS.L, EFER.LME, EFER.LMA and
CR4.PAE when get SREG inputs from userspace in order to avoid
unexpected behavior.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Tianyu Lan <tianyu.lan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: add line for totals

Add a line for the total number of events and current average at the
bottom of the body.
Note that both values exclude child trace events. I.e. if drilldown is
activated via interactive command 'x', only the totals are accounted, or
we'd be counting these twice (see previous commit "tools/kvm_stat: fix
child trace events accounting").

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: stop ignoring unhandled arguments

Unhandled arguments, which could easily include typos, are simply
ignored. We should be strict to avoid undetected typos.
To reproduce start kvm_stat with an extra argument, e.g.
'kvm_stat -d bnuh5ol' and note that this will actually work.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: suppress usage information on command line errors

Errors while parsing the '-g' command line argument result in display of
usage information prior to the error message. This is a bit confusing,
as the command line is syntactically correct.
To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive
guest.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: handle invalid regular expressions

Passing an invalid regular expression on the command line results in a
traceback. Note that interactive specification of invalid regular
expressions is not affected
To reproduce, run "kvm_stat -f '*'".

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: add hint on '-f help' to man page

The man page update for this new functionality was omitted.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: fix child trace events accounting

Child trace events were included in calculation of the overall total,
which is used for calculation of the percentages of the '%Total' column.
However, the parent trace envents' stats summarize the child trace
events, hence we'd incorrectly account for them twice, leading to
slightly wrong stats.
With this fix, we use the correct total. Consequently, the sum of the
child trace events' '%Total' column values is identical to the
respective value of the respective parent event. However, this also
means that the sum of the '%Total' column values will aggregate to more
than 100 percent.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: fix extra handling of 'help' with fields filter

Commit 67fbcd62f54d ("tools/kvm_stat: add '-f help' to get the available
event list") added support for '-f help'. However, the extra handling of
'help' will also take effect when 'help' is specified as a regex in
interactive mode via 'f'. This results in display of all events while
only those matching this regex should be shown.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: fix missing field update after filter change

When updating the fields filter, tracepoint events of fields previously
not visible were not enabled, as TracepointProvider.update_fields()
updated the member variable directly instead of using the setter, which
triggers the event enable/disable.
To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the
filter, and notice that no add'l fields that do not match the regex
'kvm_exit' will appear.
This issue was introduced by commit c469117df059 ("tools/kvm_stat:
simplify initializers").

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: fix drilldown in events-by-guests mode

When displaying debugfs events listed by guests, an attempt to switch to
reporting of stats for individual child trace events results in garbled
output. Reason is that when toggling drilldown, the update of the stats
doesn't honor when events are displayed by guests, as indicated by
Tui._display_guests.
To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/kvm_stat: fix command line option '-g'

Specifying a guest via '-g foo' always results in an error:
  $ kvm_stat -g foo
  Usage: kvm_stat [options]

  kvm_stat: error: Error while searching for guest "foo", use "-p" to
  specify a pid instead

Reason is that Tui.get_pid_from_gname() is not static, as it is supposed
to be.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86: fix WARN due to uninitialized guest FPU state

------------[ cut here ]------------
Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers.
WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90
CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G    B      OE    4.15.0-rc2+ #10
RIP: 0010:ex_handler_fprestore+0x88/0x90
Call Trace:
  fixup_exception+0x4e/0x60
  do_general_protection+0xff/0x270
  general_protection+0x22/0x30
RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm]
RSP: 0018:ffff8803d5627810 EFLAGS: 00010246
  kvm_vcpu_reset+0x3b4/0x3c0 [kvm]
  kvm_apic_accept_events+0x1c0/0x240 [kvm]
  kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm]
  kvm_vcpu_ioctl+0x479/0x880 [kvm]
  do_vfs_ioctl+0x142/0x9a0
  SyS_ioctl+0x74/0x80
  do_syscall_64+0x15f/0x600

where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu.
To fix it, move kvm_load_guest_fpu to the very beginning of
kvm_arch_vcpu_ioctl_run.

Cc: stable@vger.kernel.org
Fixes: f775b13eedee2f7f3c6fdd4e90fb79090ce5d339
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Fix load RFLAGS w/o the fixed bit

*** Guest State ***
CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871
CR3 = 0x00000000fffbc000
RSP = 0x0000000000000000  RIP = 0x0000000000000000
RFLAGS=0x00000000         DR7 = 0x0000000000000400
        ^^^^^^^^^^

The failed vmentry is triggered by the following testcase when ept=Y:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
     r[2] = open("/dev/kvm", O_RDONLY);
     r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
     r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
     struct kvm_regs regs = {
     .rflags = 0,
     };
     ioctl(r[4], KVM_SET_REGS, &regs);
     ioctl(r[4], KVM_RUN, 0);
    }

X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1
of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails.
This patch fixes it by oring X86_EFLAGS_FIXED during ioctl.

Cc: stable@vger.kernel.org
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Quan Xu <quan.xu0@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: MMU: Fix infinite loop when there is no available mmu page

The below test case can cause infinite loop in kvm when ept=0.

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
     r[2] = open("/dev/kvm", O_RDONLY);
     r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
     r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
     ioctl(r[4], KVM_RUN, 0);
    }

It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in
kvm return 1 when kvm fails to allocate root page table which can result
in beblow infinite loop:

    vcpu_run() {
     for (;;) {
     r = vcpu_enter_guest()::kvm_mmu_reload() returns 1
     if (r <= 0)
     break;
     if (need_resched())
     cond_resched();
      }
    }

This patch fixes it by returning -ENOSPC when there is no available kvm mmu
page for root page table.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 26eeb53cf0f (KVM: MMU: Bail out immediately if there is no available mmu page)
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Linux 4.15-rc3

hpfs: don't bother with the i_version counter or f_version

HPFS does not set SB_I_VERSION and does not use the i_version counter
internally.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Reviewed-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

futex: futex_wake_op, fix sign_extend32 sign bits

sign_extend32 counts the sign bit parameter from 0, not from 1. So we
have to use "11" for 12th bit, not "12".

This mistake means we have not allowed negative op and cmp args since
commit 30d6e0a4190d ("futex: Remove duplicated code and fix undefined
behaviour") till now.

Fixes: 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-4.15-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"This contains a few fixes (error handling, quota leak, FUA vs
  nobarrier mount option).

  There's one one worth mentioning separately - an off-by-one fix that
  leads to overwriting first byte of an adjacent page with 0, out of
  bounds of the memory allocated by an ioctl. This is under a privileged
  part of the ioctl, can be triggerd in some subvolume layouts"

* tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
  Btrfs: disable FUA if mounted with nobarrier
  btrfs: fix missing error return in btrfs_drop_snapshot
  btrfs: handle errors while updating refcounts in update_ref_for_cow
  btrfs: Fix quota reservation leak on preallocated files

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:

- A revert of all SCPI changes from the 4.15 merge window. They had
   regressions on the Amlogic platforms, and the submaintainer isn't
   around to fix these bugs due to vacation, etc. So we agreed to revert
   and revisit in next release cycle.

- A series fixing a number of bugs for ARM CCN interconnect, around
   module unload, smp_processor_id() in preemptable context, and fixing
   some memory allocation failure checks.

- A handful of devicetree fixes for different platforms, fixing
   warnings and errors that were previously ignored by the compiler.

- The usual set of mostly minor fixes for different platforms.

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM64: dts: meson-gx: fix UART pclk clock name
  ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
  arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
  ARM: dts: Fix dm814x missing phy-cells property
  ARM: dts: Fix elm interrupt compiler warning
  bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
  bus: arm-cci: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Simplify code
  bus: arm-ccn: Check memory allocation failure
  bus: arm-ccn: constify attribute_group structures.
  firmware: arm_scpi: Revert updates made during v4.15 merge window
  arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
  arm64: dts: sort vendor subdirectories in Makefile alphabetically
  meson-gx-socinfo: Fix package id parsing
  ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
  ARM: dts: meson: fix the memory region of the GPIO interrupt controller
  ARM: dts: meson: correct the sort order for the the gpio_intc node
  MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
  arm64: dts: uniphier: remove unnecessary interrupt-parent
  ...

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"ARM:
   - A number of issues in the vgic discovered using SMATCH
   - A bit one-off calculation in out stage base address mask (32-bit
     and 64-bit)
   - Fixes to single-step debugging instructions that trap for other
     reasons such as MMMIO aborts
   - Printing unavailable hyp mode as error
   - Potential spinlock deadlock in the vgic
   - Avoid calling vgic vcpu free more than once
   - Broken bit calculation for big endian systems

s390:
   - SPDX tags
   - Fence storage key accesses from problem state
   - Make sure that irq_state.flags is not used in the future

  x86:
   - Intercept port 0x80 accesses to prevent host instability (CVE)
   - Use userspace FPU context for guest FPU (mainly an optimization
     that fixes a double use of kernel FPU)
   - Do not leak one page per module load
   - Flush APIC page address cache from MMU invalidation notifiers"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  KVM: x86: fix APIC page invalidation
  KVM: s390: Fix skey emulation permission check
  KVM: s390: mark irq_state.flags as non-usable
  KVM: s390: Remove redundant license text
  KVM: s390: add SPDX identifiers to the remaining files
  KVM: VMX: fix page leak in hardware_setup()
  KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
  x86,kvm: remove KVM emulator get_fpu / put_fpu
  x86,kvm: move qemu/guest FPU switching out to vcpu_run
  KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
  KVM: arm/arm64: kvm_arch_destroy_vm cleanups
  KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner
  kvm: arm: don't treat unavailable HYP mode as an error
  KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic
  kvm: arm64: handle single-step of hyp emulated mmio instructions
  kvm: arm64: handle single-step during SError exceptions
  kvm: arm64: handle single-step of userspace mmio instructions
  kvm: arm64: handle single-stepping trapped instructions
  KVM: arm/arm64: debug: Introduce helper for single-step
  arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
  ...

Merge branch 'fixes' into for-next

* fixes:
  ARM64: dts: meson-gx: fix UART pclk clock name
  ARM: dts: Fix dm814x missing phy-cells property
  ARM: dts: Fix elm interrupt compiler warning
  bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
  bus: arm-cci: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Simplify code
  bus: arm-ccn: Check memory allocation failure
  bus: arm-ccn: constify attribute_group structures.
  meson-gx-socinfo: Fix package id parsing
  ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
  ARM: dts: meson: fix the memory region of the GPIO interrupt controller
  ARM: dts: meson: correct the sort order for the the gpio_intc node

Merge tag 'amlogic-fixes-1' of git://git./linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic fixes for v4.15-rc
- GPIO interrupt fixes
- socinfo fix for GX series
- fix typo

* tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gx: fix UART pclk clock name
  meson-gx-socinfo: Fix package id parsing
  ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
  ARM: dts: meson: fix the memory region of the GPIO interrupt controller
  ARM: dts: meson: correct the sort order for the the gpio_intc node

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux into fixes

bus: ARM CCN and CCI PMU driver fixes

This is a bunch of fixes CCN and (guest starring this time) CCI drivers.

* Check for potential of failed allocation for the driver name string
* Manage CPU ID properly at allocation (both CCN and CCI)
* Fix module unload warnings related to objects release order
* Small improvements like using allocating printfs and proper
  attributes constification

The one fixing potential issues have been cc-ed to stable.

* tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux:
  bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
  bus: arm-cci: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Simplify code
  bus: arm-ccn: Check memory allocation failure
  bus: arm-ccn: constify attribute_group structures.

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.15/fixes-dt-warnings' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Two fixes for dts compiler warnings

These recently started showing up with better dtc checks being
introduced.

* tag 'omap-for-v4.15/fixes-dt-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dm814x missing phy-cells property
ARM: dts: Fix elm interrupt compiler warning

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keys-fixes-20171208' of git://git./linux/kernel/git/dhowells/linux-fs into keys-for-linus

Assorted fixes for keyrings, ASN.1, X.509 and PKCS#7.

kmemcheck: rip it out for real

Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
    drivers).

2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
    to userspace and broke some apps. From Johannes Berg.

3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
    Wang.

4) Gianfar MAC can't do EEE so don't advertise it by default, from
    Claudiu Manoil.

5) Relax strict netlink attribute validation, but emit a warning. From
    David Ahern.

6) Fix regression in checksum offload of thunderx driver, from Florian
    Westphal.

7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.

8) New card support in iwlwifi, from Ihab Zhaika.

9) BBR congestion control bug fixes from Neal Cardwell.

10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.

11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.

12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.

13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
  net: mvpp2: fix the RSS table entry offset
  tcp: evaluate packet losses upon RTT change
  tcp: fix off-by-one bug in RACK
  tcp: always evaluate losses in RACK upon undo
  tcp: correctly test congestion state in RACK
  bnxt_en: Fix sources of spurious netpoll warnings
  tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
  tcp_bbr: reset full pipe detection on loss recovery undo
  tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
  sfc: pass valid pointers from efx_enqueue_unwind
  gianfar: Disable EEE autoneg by default
  tcp: invalidate rate samples during SACK reneging
  can: peak/pcie_fd: fix potential bug in restarting tx queue
  can: usb_8dev: cancel urb on -EPIPE and -EPROTO
  can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
  can: esd_usb2: cancel urb on -EPIPE and -EPROTO
  can: ems_usb: cancel urb on -EPIPE and -EPROTO
  can: mcba_usb: cancel urb on -EPROTO
  usbnet: fix alignment for frames with no ethernet header
  tcp: use current time in tcp_rcv_space_adjust()
  ...

Merge tag 'media/v4.15-2' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

"A series of fixes for the media subsytem:

   - The largest amount of fixes in this series is with regards to
     comments that aren't kernel-doc, but start with "/**".

     A new check added for 4.15 makes it to produce a *huge* amount of
     new warnings (I'm compiling here with W=1). Most of the patches in
     this series fix those.

     No code changes - just comment changes at the source files

   - rc: some fixed in order to better handle RC repetition codes

   - v4l-async: use the v4l2_dev from the root notifier when matching
     sub-devices

   - v4l2-fwnode: Check subdev count after checking port

   - ov 13858 and et8ek8: compilation fix with randconfigs

   - usbtv: a trivial new USB ID addition

   - dibusb-common: don't do DMA on stack on firmware load

   - imx274: Fix error handling, add MAINTAINERS entry

   - sir_ir: detect presence of port"

* tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits)
  media: imx274: Fix error handling, add MAINTAINERS entry
  media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
  media: v4l2-fwnode: Check subdev count after checking port
  media: et8ek8: select V4L2_FWNODE
  media: ov13858: Select V4L2_FWNODE
  media: rc: partial revert of "media: rc: per-protocol repeat period"
  media: dvb: i2c transfers over usb cannot be done from stack
  media: dvb-frontends: complete kernel-doc markups
  media: docs: add documentation for frontend attach info
  media: dvb_frontends: fix kernel-doc macros
  media: drivers: remove "/**" from non-kernel-doc comments
  media: lm3560: add a missing kernel-doc parameter
  media: rcar_jpu: fix two kernel-doc markups
  media: vsp1: add a missing kernel-doc parameter
  media: soc_camera: fix a kernel-doc markup
  media: mt2063: fix some kernel-doc warnings
  media: radio-wl1273: fix a parameter name at kernel-doc macro
  media: s3c-camif: add missing description at s3c_camif_find_format()
  media: mtk-vpu: add description for wdt fields at struct mtk_vpu
  media: vdec: fix some kernel-doc warnings
  ...

Merge tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"This pull is a bit larger than I'd like but a large bunch of it is
  license fixes, AMD wanted to fix the licenses for a bunch of files
  that were missing them,

Otherwise a bunch of TTM regression fix since the hugepage support,
some i915 and gvt fixes, a core connector free in a safe context fix,
and one bridge fix"

* tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
  Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
  drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
  drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
  drm/exynos: remove unnecessary function declaration
  drm/exynos: remove unnecessary descrptions
  drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
  drm/exynos: Fix dma-buf import
  drm/ttm: swap consecutive allocated pooled pages v4
  drm: safely free connectors from connector_iter
  drm/i915/gvt: set max priority for gvt context
  drm/i915/gvt: Don't mark vgpu context as inactive when preempted
  drm/i915/gvt: Limit read hw reg to active vgpu
  drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
  drm/i915/gvt: Emulate PCI expansion ROM base address register
  drm/ttm: swap consecutive allocated cached pages v3
  drm/ttm: roundup the shrink request to prevent skip huge pool
  drm/ttm: add page order support in ttm_pages_put
  drm/ttm: add set_pages_wb for handling page order more than zero
  drm/ttm: add page order in page pool
  ...

Merge tag 'md/4.15-rc2' of git://git./linux/kernel/git/shli/md

Pull md fixes from Shaohua Li:
"Some MD fixes.

  The notable one is a raid5-cache deadlock bug with dm-raid, others are
  not significant"

* tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid1/10: add missed blk plug
  md: limit mdstat resync progress to max_sectors
  md/r5cache: move mddev_lock() out of r5c_journal_mode_set()
  md/raid5: correct degraded calculation in raid5_error

Merge tag 'devicetree-fixes-for-4.15-part2' of git://git./linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:
"Another set of DT fixes:

   - Fixes from overlay code rework. A trifecta of fixes to the locking,
     an out of bounds access, and a memory leak in of_overlay_apply()

   - Clean-up at25 eeprom binding document

   - Remove leading '0x' in unit-addresses from binding docs"

* tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: overlay: Make node skipping in init_overlay_changeset() clearer
  of: overlay: Fix out-of-bounds write in init_overlay_changeset()
  of: overlay: Fix (un)locking in of_overlay_apply()
  of: overlay: Fix memory leak in of_overlay_apply() error path
  dt-bindings: eeprom: at25: Document device-specific compatible values
  dt-bindings: eeprom: at25: Grammar s/are can/can/
  dt-bindings: Remove leading 0x from bindings notation
  of: overlay: Remove else after goto
  of: Spelling s/changset/changeset/
  of: unittest: Remove bogus overlay mutex release from overlay_data_add()

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio bugfixes from Michael Tsirkin:
"A couple of minor bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_net: fix return value check in receive_mergeable()
  virtio_mmio: add cleanup for virtio_mmio_remove
  virtio_mmio: add cleanup for virtio_mmio_probe

Merge tag 'for-linus-4.15-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"Just two small fixes for the new pvcalls frontend driver"

* tag 'for-linus-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: Fix a check in pvcalls_front_remove()
xen/pvcalls: check for xenbus_read() errors

Merge tag 'powerpc-4.15-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

"One notable fix for kexec on Power9, where we were not clearing MMU
  PID properly which sometimes leads to hangs. Finally debugged to a
  root cause by Nick.

  A revert of a patch which tried to rework our panic handling to get
  more output on the console, but inadvertently broke reporting the
  panic to the hypervisor, which apparently people care about.

  Then a fix for an oops in the PMU code, and finally some s/%p/%px/ in
  xmon.

  Thanks to: David Gibson, Nicholas Piggin, Ravi Bangoria"

* tag 'powerpc-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xmon: Don't print hashed pointers in xmon
  powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
  Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
  powerpc/perf: Fix oops when grouping different pmu events

Merge tag 'linux-can-fixes-for-4.15-20171208' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2017-12-08

this is a pull request of 6 patches for net/master.

Martin Kelly provides 5 patches for various USB based CAN drivers, that
properly cancel the URBs on adapter unplug, so that the driver doesn't
end up in an endless loop. Stephane Grosjean provides a patch to restart
the tx queue if zero length packages are transmitted.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-12-08' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.15

Second set of fixes for 4.15. This time a lot of iwlwifi patches and
two brcmfmac patches. Most important here are the MIC and IVC fixes
for iwlwifi to unbreak 9000 series.

iwlwifi

* fix rate-scaling to not start lowest possible rate

* fix the TX queue hang detection for AP/GO modes

* fix the TX queue hang timeout in monitor interfaces

* fix packet injection

* remove a wrong error message when dumping PCI registers

* fix race condition with RF-kill

* tell mac80211 when the MIC has been stripped (9000 series)

* tell mac80211 when the IVC has been stripped (9000 series)

* add 2 new PCI IDs, one for 9000 and one for 22000

* fix a queue hang due during a P2P Remain-on-Channel operation

brcmfmac

* fix a race which sometimes caused a crash during sdio unbind

* fix a kernel-doc related build error
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: fix the RSS table entry offset

The macro used to access or set an RSS table entry was using an offset
of 8, while it should use an offset of 0. This lead to wrongly configure
the RSS table, not accessing the right entries.

Fixes: 1d7d15d79fb4 ("net: mvpp2: initialize the RSS tables")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tcp-RACK-loss-recovery-bug-fixes'

Yuchung Cheng says:

====================
tcp: RACK loss recovery bug fixes

This patch set has four minor bug fixes in TCP RACK loss recovery.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: evaluate packet losses upon RTT change

RACK skips an ACK unless it advances the most recently delivered
TX timestamp (rack.mstamp). Since RACK also uses the most recent
RTT to decide if a packet is lost, RACK should still run the
loss detection whenever the most recent RTT changes. For example,
an ACK that does not advance the timestamp but triggers the cwnd
undo due to reordering, would then use the most recent (higher)
RTT measurement to detect further losses.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix off-by-one bug in RACK

RACK should mark a packet lost when remaining wait time is zero.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: always evaluate losses in RACK upon undo

When sender detects spurious retransmission, all packets
marked lost are remarked to be in-flight. However some may
be considered lost based on its timestamps in RACK. This patch
forces RACK to re-evaluate, which may be skipped previously if
the ACK does not advance RACK timestamp.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: correctly test congestion state in RACK

RACK does not test the loss recovery state correctly to compute
the reordering window. It assumes if lost_out is zero then TCP is
not in loss recovery. But it can be zero during recovery before
calling tcp_rack_detect_loss(): when an ACK acknowledges all
packets marked lost before receiving this ACK, but has not yet
to discover new ones by tcp_rack_detect_loss(). The fix is to
simply test the congestion state directly.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix sources of spurious netpoll warnings

After applying 2270bc5da3497945 ("bnxt_en: Fix netpoll handling") and
903649e718f80da2 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."),
we still see the following WARN fire:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1875170 at net/core/netpoll.c:165 netpoll_poll_dev+0x15a/0x160
  bnxt_poll+0x0/0xd0 exceeded budget in poll
  <snip>
  Call Trace:
   [<ffffffff814be5cd>] dump_stack+0x4d/0x70
   [<ffffffff8107e013>] __warn+0xd3/0xf0
   [<ffffffff8107e07f>] warn_slowpath_fmt+0x4f/0x60
   [<ffffffff8179519a>] netpoll_poll_dev+0x15a/0x160
   [<ffffffff81795f38>] netpoll_send_skb_on_dev+0x168/0x250
   [<ffffffff817962fc>] netpoll_send_udp+0x2dc/0x440
   [<ffffffff815fa9be>] write_ext_msg+0x20e/0x250
   [<ffffffff810c8125>] call_console_drivers.constprop.23+0xa5/0x110
   [<ffffffff810c9549>] console_unlock+0x339/0x5b0
   [<ffffffff810c9a88>] vprintk_emit+0x2c8/0x450
   [<ffffffff810c9d5f>] vprintk_default+0x1f/0x30
   [<ffffffff81173df5>] printk+0x48/0x50
   [<ffffffffa0197713>] edac_raw_mc_handle_error+0x563/0x5c0 [edac_core]
   [<ffffffffa0197b9b>] edac_mc_handle_error+0x42b/0x6e0 [edac_core]
   [<ffffffffa01c3a60>] sbridge_mce_output_error+0x410/0x10d0 [sb_edac]
   [<ffffffffa01c47cc>] sbridge_check_error+0xac/0x130 [sb_edac]
   [<ffffffffa0197f3c>] edac_mc_workq_function+0x3c/0x90 [edac_core]
   [<ffffffff81095f8b>] process_one_work+0x19b/0x480
   [<ffffffff810967ca>] worker_thread+0x6a/0x520
   [<ffffffff8109c7c4>] kthread+0xe4/0x100
   [<ffffffff81884c52>] ret_from_fork+0x22/0x40

This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting
in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually
given a non-zero budget.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM64: dts: meson-gx: fix UART pclk clock name

The clock-names for pclk was wrongly set to "core", but the bindings
specifies "pclk".
This was not cathed until the legacy non-documented bindings were removed.

Reported-by: Andreas Färber <afaerber@suse.de>
Fixes: f72d6f6037b7 ("ARM64: dts: meson-gx: use stable UART bindings with correct gate clock")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Merge branch 'tcp-bbr-sampling-fixes'

Neal Cardwell says:

====================
TCP BBR sampling fixes for loss recovery undo

This patch series has a few minor bug fixes for cases where spurious
loss recoveries can trick BBR estimators into estimating that the
available bandwidth is much lower than the true available bandwidth.
In both cases the fix here is to just reset the estimator upon loss
recovery undo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: reset long-term bandwidth sampling on loss recovery undo

Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.

Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: reset full pipe detection on loss recovery undo

Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.

Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.

Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: record "full bw reached" decision in new full_bw_reached bit

This commit records the "full bw reached" decision in a new
full_bw_reached bit. This is a pure refactor that does not change the
current behavior, but enables subsequent fixes and improvements.

In particular, this enables simple and clean fixes because the full_bw
and full_bw_cnt can be unconditionally zeroed without worrying about
forgetting that we estimated we filled the pipe in Startup. And it
enables future improvements because multiple code paths can be used
for estimating that we filled the pipe in Startup; any new code paths
only need to set this bit when they think the pipe is full.

Note that this fix intentionally reduces the width of the full_bw_cnt
counter, since we have never used the most significant bit.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: pass valid pointers from efx_enqueue_unwind

The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers
cannot be NULL. Add a paranoid warning to check this condition and fix
the one case where they were NULL.

efx_enqueue_unwind() is called very rarely, during error handling.
Without this fix it would fail with a NULL pointer dereference in
efx_dequeue_buffer, with efx_enqueue_skb in the call stack.

Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Reported-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gianfar: Disable EEE autoneg by default

This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:

- three more patches in regard to the SPDX license tags. The missing
   tags for the files in arch/s390/kvm will be merged via the KVM tree.
   With that all s390 related files should have their SPDX tags.

- a patch to get rid of 'struct timespec' in the DASD driver.

- bug fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix compat system call table
  s390/mm: fix off-by-one bug in 5-level page table handling
  s390: Remove redudant license text
  s390: add a few more SPDX identifiers
  s390/dasd: prevent prefix I/O error
  s390: always save and restore all registers on context switch
  s390/dasd: remove 'struct timespec' usage
  s390/qdio: restrict target-full handling to IQDIO
  s390/qdio: consider ERROR buffers for inbound-full condition
  s390/virtio: add BSD license to virtio-ccw

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Fix some more FP register fallout from the SVE patches and also some
  problems with the PGD tracking in our software PAN emulation code,
  after we received a crash report from a 3.18 kernel running a
  backport.

  Summary:

   - fix SW PAN pgd shadowing for kernel threads, EFI and exiting user
     tasks

   - fix FP register leak when a task_struct is re-allocated

   - fix potential use-after-free in FP state tracking used by KVM"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sve: Avoid dereference of dead task_struct in KVM guest entry
  arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
  arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
  arm64: fpsimd: Abstract out binding of task's fpsimd context to the cpu.
  arm64: fpsimd: Prevent registers leaking from dead tasks

Merge tag 'acpi-4.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"This fixes an out of bounds warning from KASAN in the ACPI CPPC
driver"

* tag 'acpi-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / CPPC: Fix KASAN global out of bounds warning

Merge tag 'pm-4.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"This fixes an issue in the device runtime PM framework that prevents
  customer devices from resuming if runtime PM is disabled for one or
  more of their supplier devices (as reflected by device links between
  those devices)"

* tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / runtime: Fix handling of suppliers with disabled runtime PM

of: overlay: Make node skipping in init_overlay_changeset() clearer

Make it more clear that nodes without "__overlay__" subnodes are
skipped, by reverting the logic and using continue.
This also reduces indentation level.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

of: overlay: Fix out-of-bounds write in init_overlay_changeset()

If an overlay has no "__symbols__" node, but it has nodes without
"__overlay__" subnodes at the end (e.g. a "__fixups__" node), after
filling in all fragments for nodes with "__overlay__" subnodes,
"fragment = &fragments[cnt]" will point beyond the end of the allocated
array.

Hence writing to "fragment->overlay" will overwrite unallocated memory,
which may lead to a crash later.

Fix this by deferring both the assignment to "fragment" and the
offending write afterwards until we know for sure the node has an
"__overlay__" subnode, and thus a valid entry in "fragments[]".

Fixes: 61b4de4e0b384f4a ("of: overlay: minor restructuring")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

X.509: fix comparisons of ->pkey_algo

->pkey_algo used to be an enum, but was changed to a string by commit
4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum"). But
two comparisons were not updated. Fix them to use strcmp().

This bug broke signature verification in certain configurations,
depending on whether the string constants were deduplicated or not.

Fixes: 4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

KEYS: reject NULL restriction string when type is specified

keyctl_restrict_keyring() allows through a NULL restriction when the
"type" is non-NULL, which causes a NULL pointer dereference in
asymmetric_lookup_restriction() when it calls strcmp() on the
restriction string.

But no key types actually use a "NULL restriction" to mean anything, so
update keyctl_restrict_keyring() to reject it with EINVAL.

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 97d3aa0f3134 ("KEYS: Add a lookup_restriction function for the asymmetric key type")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

security: keys: remove redundant assignment to key_ref

Variable key_ref is being assigned a value that is never read;
key_ref is being re-assigned a few statements later. Hence this
assignment is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

X.509: use crypto_shash_digest()

Use crypto_shash_digest() instead of crypto_shash_init() followed by
crypto_shash_finup(). (For simplicity only; they are equivalent.)

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

KEYS: be careful with error codes in public_key_verify_signature()

In public_key_verify_signature(), if akcipher_request_alloc() fails, we
return -ENOMEM.  But that error code was set 25 lines above, and by
accident someone could easily insert new code in between that assigns to
'ret', which would introduce a signature verification bypass.  Make the
code clearer by moving the -ENOMEM down to where it is used.

Additionally, the callers of public_key_verify_signature() only consider
a negative return value to be an error.  This means that if any positive
return value is accidentally introduced deeper in the call stack (e.g.
'return EBADMSG' instead of 'return -EBADMSG' somewhere in RSA),
signature verification will be bypassed.  Make things more robust by
having public_key_verify_signature() warn about positive errors and
translate them into -EINVAL.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

pkcs7: use crypto_shash_digest()

Use crypto_shash_digest() instead of crypto_shash_init() followed by
crypto_shash_finup(). (For simplicity only; they are equivalent.)

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

pkcs7: fix check for self-signed certificate

pkcs7_validate_trust_one() used 'x509->next == x509' to identify a
self-signed certificate.  That's wrong; ->next is simply the link in the
linked list of certificates in the PKCS#7 message.  It should be
checking ->signer instead.  Fix it.

Fortunately this didn't actually matter because when we re-visited
'x509' on the next iteration via 'x509->signer', it was already seen and
not verified, so we returned -ENOKEY anyway.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

pkcs7: return correct error code if pkcs7_check_authattrs() fails

If pkcs7_check_authattrs() returns an error code, we should pass that
error code on, rather than using ENOMEM.

Fixes: 99db44350672 ("PKCS#7: Appropriately restrict authenticated attributes and content type")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

509: fix printing uninitialized stack memory when OID is empty

Callers of sprint_oid() do not check its return value before printing
the result. In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed. Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

X.509: fix buffer overflow detection in sprint_oid()

In sprint_oid(), if the input buffer were to be more than 1 byte too
small for the first snprintf(), 'bufsize' would underflow, causing a
buffer overflow when printing the remainder of the OID.

Fortunately this cannot actually happen currently, because no users pass
in a buffer that can be too small for the first snprintf().

Regardless, fix it by checking the snprintf() return value correctly.

For consistency also tweak the second snprintf() check to look the same.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

X.509: reject invalid BIT STRING for subjectPublicKey

Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte.  Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().

This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.

Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.

It would be nice to handle the metadata byte in asn1_ber_decoder()
instead.  But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.

Here was the WARN (cleaned up slightly):

    WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971
    Modules linked in:
    CPU: 1 PID: 202 Comm: keyctl Tainted: G    B            4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    task: ffff880033014180 task.stack: ffff8800305c8000
    Call Trace:
     __do_kmalloc mm/slab.c:3706 [inline]
     __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726
     kmemdup+0x17/0x40 mm/util.c:118
     kmemdup include/linux/string.h:414 [inline]
     x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

ASN.1: check for error from ASN1_OP_END__ACT actions

asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT.  In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes).  Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.

This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).

In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest.  But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>

ASN.1: fix out-of-bounds read when parsing indefinite length item

In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH).  This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.

Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.

This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.

KASAN report (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
    BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
    Read of size 128 at addr ffff880035dd9eaf by task keyctl/195

    CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xd1/0x175 lib/dump_stack.c:53
     print_address_description+0x78/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x23f/0x350 mm/kasan/report.c:409
     memcpy+0x1f/0x50 mm/kasan/kasan.c:302
     memcpy ./include/linux/string.h:341 [inline]
     x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
     asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
     x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 195:
     __do_kmalloc_node mm/slab.c:3675 [inline]
     __kmalloc_node+0x47/0x60 mm/slab.c:3682
     kvmalloc ./include/linux/mm.h:540 [inline]
     SYSC_add_key security/keys/keyctl.c:104 [inline]
     SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

KEYS: add missing permission check for request_key() destination

When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring.  This should require Write permission to the keyring.  However,
there is actually no permission check.

This can be abused to add keys to any keyring to which only Search
permission is granted.  This is because Search permission allows joining
the keyring.  keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.

Both negatively and positively instantiated keys can be added using this
method.  Adding negative keys is trivial.  Adding a positive key is a
bit trickier.  It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().

Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.

We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key().  Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.

We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit 8bbf4976b59f
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring.  (I don't know of any users
who actually do that, though...)

Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key")
Cc: <stable@vger.kernel.org> # v2.6.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

KEYS: remove unnecessary get/put of explicit dest_keyring

In request_key_and_link(), in the case where the dest_keyring was
explicitly specified, there is no need to get another reference to
dest_keyring before calling key_link(), then drop it afterwards. This
is because by definition, we already have a reference to dest_keyring.

This change is useful because we'll be making
construct_get_dest_keyring() able to return an error code, and we don't
want to have to handle that error here for no reason.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

tcp: invalidate rate samples during SACK reneging

Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.

< ack 6001 win 10000 sack 7001:38001
< ack 7001 win 0 sack 8001:38001 // Reneg detected
> seq 7001:8001 // RTO, SACK cleared.
< ack 38001 win 10000

In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.

This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: peak/pcie_fd: fix potential bug in restarting tx queue

Don't rely on can_get_echo_skb() return value to wake the network tx
queue up: can_get_echo_skb() returns 0 if the echo array slot was not
occupied, but also when the DLC of the released echo frame was 0.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb_8dev: cancel urb on -EPIPE and -EPROTO

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: kvaser_usb: cancel urb on -EPIPE and -EPROTO

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: esd_usb2: cancel urb on -EPIPE and -EPROTO

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: ems_usb: cancel urb on -EPIPE and -EPROTO

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcba_usb: cancel urb on -EPROTO

When we unplug the device, we can see both -EPIPE and -EPROTO depending
on exact timing and what system we run on. If we continue to resubmit
URBs, they will immediately fail, and they can cause stalls, especially
on slower CPUs.

Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

regression fix for vc4 + rpm stable fix for analogix bridge

* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage

Merge tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
  and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)

gvt-fixes-2017-12-06

- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)

* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
  Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
  drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
  drm/i915/gvt: set max priority for gvt context
  drm/i915/gvt: Don't mark vgpu context as inactive when preempted
  drm/i915/gvt: Limit read hw reg to active vgpu
  drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
  drm/i915/gvt: Emulate PCI expansion ROM base address register
  drm/i915/cnl: Mask previous DDI - PLL mapping
  drm/i915: Fix vblank timestamp/frame counter jumps on gen2
  drm/i915: Skip switch-to-kernel-context on suspend when wedged

Merge tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

- fix page fault issue due to using wrong device object in prime import.
- drop NONCONTIG flag without IOMMU support.
- remove unnecessary members and declaration.

* tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: remove unnecessary function declaration
  drm/exynos: remove unnecessary descrptions
  drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
  drm/exynos: Fix dma-buf import

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2017-12-06

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fixing broken uapi for BPF tracing programs for s390 and arm64
   architectures due to pt_regs being in-kernel only, and not part
   of uapi right now. A wrapper is added that exports pt_regs in
   an asm-generic way. For arm64 this maps to existing user_pt_regs
   structure and for s390 a user_pt_regs structure exporting the
   beginning of pt_regs is added and uapi-exported, thus fixing the
   BPF issues seen in perf (and BPF selftests), all from Hendrik.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

usbnet: fix alignment for frames with no ethernet header

The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".

Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.

Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: use current time in tcp_rcv_space_adjust()

When I switched rcv_rtt_est to high resolution timestamps, I forgot
that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust()

Using an old timestamp leads to autotuning lags.

Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: Relax attr validation for fixed length types

Commit 28033ae4e0f5 ("net: netlink: Update attr validation to require
exact length for some types") requires attributes using types NLA_U* and
NLA_S* to have an exact length. This change is exposing bugs in various
userspace commands that are sending attributes with an invalid length
(e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While
the commands are clearly broken and need to be fixed, users are arguing
that the sudden change in enforcement is breaking older commands on
newer kernels for use cases that otherwise "worked".

Relax the validation to print a warning mesage similar to what is done
for messages containing extra bytes after parsing.

Fixes: 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types")
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

adding missing rcu_read_unlock in ipxip6_rcv

commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
introduced new exit point in ipxip6_rcv. however rcu_read_unlock is
missing there. this diff is fixing this

v1->v2:
instead of doing rcu_read_unlock in place, we are going to "drop"
section (to prevent skb leakage)

Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mv88e6xxx-error-patch-fixes'

Andrew Lunn says:

====================
mv88e6xxx error patch fixes

While trying to bring up a new PHY on a board, i exercised the error
paths a bit, and discovered some bugs. The unwind for interrupt
handling deadlocks, and the MDIO code hits a BUG() when a registered
MDIO device is freed without first being unregistered.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Unregister MDIO bus on error path

The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Fix interrupt masking on removal

When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.

Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: arc: fix error handling in emac_rockchip_probe

If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case

add appropriate calls to clk_disable_unprepare() by jumping to out_mdio
in case orion_mdio_probe() returns -EPROBE_DEFER.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: fix return value check in receive_mergeable()

The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>