Merge tag 'drm-misc-next-2025-05-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.16-rc1:

Cross-subsystem Changes:
- Change vsprintf %p4cn to %p4chR, remove %p4cn.

Core Changes:
- Documentation updates (fb rendering, actual_brightness)

Driver Changes:
- Small fixes to appletbdrm, panthor, st7571-i2c, rockchip, renesas,
  panic handler, gpusvm, vkms, panel timings.
- Add AUO B140QAN08.H, BOE NE140WUM-N6S, CSW MNE007QS3-8, BOE TD4320 panels.
- Convert rk3066_hdmi to bridge driver.
- Improve HPD on anx7625.
- Speed up loading tegra firmware, and other small fixes to tegra & host1x.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/5428be12-fc08-4e28-8c5f-85d73b8a7e04@linux.intel.com

Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'

Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com

Merge tag 'drm-xe-next-2025-05-08' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

UAPI Changes:
- Expose PCIe link downgrade attributes (Raag)

Cross-subsystem Changes:

Core Changes:
- gpusvm has_dma_mapping fix (Dafna)

Driver Changes:
- Forcewake hold fix (Tejas)
- Fix guc_info debugfs for VFs (Daniele)
- Fix devcoredump chunk alignment calculation (Arnd)
- Don't print timedout job message on killed exec queues (Matt Brost)
- Don't flush the GSC worker from the reset path (Daniele)
- Use copy_from_user() instead of __copy_from_user() (Harish)
- Only flush SVM garbage collector if CONFIG_DRM_XE_GPUSVM (Shuicheng)
- Fix forcewake vs runtime pm ref release ordering (Shuicheng)
- Move xe_device_sysfs_init() to xe_device_probe() (Raag)
- Append PCIe Gen5 limitations to xe_firmware document (Raag)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aBzUwbzCzz7Qo7fA@fedora

Merge tag 'drm-intel-gt-next-2025-05-08-1' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Driver Changes:

- Fix SLPC wait boosting reference counting to avoid getting stuck on non-boost
  frequency on power saving profile on DG1/DG2 (Vinay)
- Add 20ms delay to engine reset for robustness on HSW (Nitin)

- Use proper sleeping functions for timeouts shorter than 20ms (Andi)
- Fix fence not released on early probe errors for HuC (Janusz)

- Remove const from struct i915_wa list allocation (Kees)
- Apply SPDX license format where missing and use single-line format (Andi)
- Whitespace fixes (Dan, Andi)
- Selftest improvements (Mikolaj, Badal, Sk,

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aBxNYp0IviE23zy-@jlahtine-mobl

drm/xe/doc: Wire up PCIe Gen5 limitations

Append PCIe Gen5 limitations to xe_firmware document.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250506054835.3395220-4-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Expose PCIe link downgrade attributes

Expose sysfs attributes for PCIe link downgrade capability and status.

v2: Move from debugfs to sysfs (Lucas, Rodrigo, Badal)
    Rework macros and their naming (Rodrigo)
v3: Use sysfs_create_files() (Riana)
    Fix checkpatch warning (Riana)
v4: s/downspeed/downgrade (Lucas, Rodrigo, Riana)
v5: Use PCIe Gen agnostic naming (Rodrigo)
v6: s/pcie_gen/auto_link (Lucas)

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250506054835.3395220-3-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Move xe_device_sysfs_init() to xe_device_probe()

Since xe_device_sysfs_init() exposes device specific attributes, a better
place for it is xe_device_probe().

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250506054835.3395220-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Release force wake first then runtime power

xe_force_wake_get() is dependent on xe_pm_runtime_get(), so for
the release path, xe_force_wake_put() should be called first then
xe_pm_runtime_put().
Combine the error path and normal path together with goto.

Fixes: 85d547608ef5 ("drm/xe/xe_gt_debugfs: Update handling of xe_force_wake_get return")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250507022302.2187527-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add config control for svm flush work

Without CONFIG_DRM_XE_GPUSVM set, GPU SVM is not initialized thus below
warning pops. Refine the flush work code to be controlled by the config
to avoid below warning:
"
[  453.132028] ------------[ cut here ]------------
[  453.132527] WARNING: CPU: 9 PID: 4491 at kernel/workqueue.c:4205 __flush_work+0x379/0x3a0
[  453.133355] Modules linked in: xe drm_ttm_helper ttm gpu_sched drm_buddy drm_suballoc_helper drm_gpuvm drm_exec
[  453.134352] CPU: 9 UID: 0 PID: 4491 Comm: xe_exec_mix_mod Tainted: G     U  W           6.15.0-rc3+ #7 PREEMPT(full)
[  453.135405] Tainted: [U]=USER, [W]=WARN
...
[  453.136921] RIP: 0010:__flush_work+0x379/0x3a0
[  453.137417] Code: 8b 45 00 48 8b 55 08 89 c7 48 c1 e8 04 83 e7 08 83 e0 0f 83 cf 02 89 c6 48 0f ba 6d 00 03 e9 d5 fe ff ff 0f 0b e9 db fd ff ff <0f> 0b 45 31 e4 e9 d1 fd ff ff 0f 0b e9 03 ff ff ff 0f 0b e9 d6 fe
[  453.139250] RSP: 0018:ffffc90000c67b18 EFLAGS: 00010246
[  453.139782] RAX: 0000000000000000 RBX: ffff888108a24000 RCX: 0000000000002000
[  453.140521] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881016d61c8
[  453.141253] RBP: ffff8881016d61c8 R08: 0000000000000000 R09: 0000000000000000
[  453.141985] R10: 0000000000000000 R11: 0000000008a24000 R12: 0000000000000001
[  453.142709] R13: 0000000000000002 R14: 0000000000000000 R15: ffff888107db8c00
[  453.143450] FS:  00007f44853d4c80(0000) GS:ffff8882f469b000(0000) knlGS:0000000000000000
[  453.144276] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  453.144853] CR2: 00007f4487629228 CR3: 00000001016aa000 CR4: 00000000000406f0
[  453.145594] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  453.146320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  453.147061] Call Trace:
[  453.147336]  <TASK>
[  453.147579]  ? tick_nohz_tick_stopped+0xd/0x30
[  453.148067]  ? xas_load+0x9/0xb0
[  453.148435]  ? xa_load+0x6f/0xb0
[  453.148781]  __xe_vm_bind_ioctl+0xbd5/0x1500 [xe]
[  453.149338]  ? dev_printk_emit+0x48/0x70
[  453.149762]  ? _dev_printk+0x57/0x80
[  453.150148]  ? drm_ioctl+0x17c/0x440
[  453.150544]  ? __drm_dev_vprintk+0x36/0x90
[  453.150983]  ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[  453.151575]  ? drm_ioctl_kernel+0x9f/0xf0
[  453.151998]  ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[  453.152560]  drm_ioctl_kernel+0x9f/0xf0
[  453.152968]  drm_ioctl+0x20f/0x440
[  453.153332]  ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[  453.153893]  ? ioctl_has_perm.constprop.0.isra.0+0xae/0x100
[  453.154489]  ? memory_bm_test_bit+0x5/0x60
[  453.154935]  xe_drm_ioctl+0x47/0x70 [xe]
[  453.155419]  __x64_sys_ioctl+0x8d/0xc0
[  453.155824]  do_syscall_64+0x47/0x110
[  453.156228]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
"

v2 (Matt):
    refine commit message to have more details
    add Fixes tag
    move the code to xe_svm.h which already have the config
    remove a blank line per codestyle suggestion

Fixes: 63f6e480d115 ("drm/xe: Add SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250502170052.1787973-1-shuicheng.lin@intel.com

drm/xe: Use copy_from_user() instead of __copy_from_user()

copy_from_user() has more checks and is more safer than
__copy_from_user()

Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/acabf20aa8621c7bc8de09b1bffb8d14b5376484.1746126614.git.harish.chegondi@intel.com

gpu: host1x: Use for_each_available_child_of_node_scoped()

Avoids the need for manual cleanup of_node_put() in early exits
from the loop.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240830073824.3539690-1-ruanjinjie@huawei.com

drm/tegra: Fix a possible null pointer dereference

In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.

Fixes: b7e0b04ae450 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com

drm/tegra: rgb: Fix the unbound reference count

The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.

Fixes: d8f4a9eda006 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com

gpu: host1x: Remove mid-job CDMA flushes

The current code can issue CDMA flushes (DMAPUT bumps) in the middle
of a job, before all opcodes have been written into the pushbuffer.
This can happen when pushbuffer fills up. Presumably this made sense
at some point in the past, but it doesn't anymore, as it cannot lead
to more space appearing in the pushbuffer as it is only cleaned full
jobs at a time.

Mid-job flushes can also cause problems, as in an extreme situation
(seen in practice), the hardware can run through the entire pushbuffer
including the prefix of a partially written job without the driver
being able to process any CDMA updates. This can cause the engine
MLOCK to be taken and held for extended periods as the tail of the
job is not yet available to hardware.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250204024546.1168126-1-mperttunen@nvidia.com

drm/tegra: falcon: Pipeline firmware copy

The Falcon DMA engine allows queueing multiple operations for
improved performance. Do this to optimize firmware loading.
A performance improvement of 4x to 6x is observed.

Co-developed-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205061027.1205748-1-mperttunen@nvidia.com

drm/tegra: dpaux: Use dev_err_probe()

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250402193758365XauggSF2EWBYY-e_jgNch@zte.com.cn

drm/tegra: Remove unneeded include

The header file 'tegra_drm.h' is included in gem.c, but this file is
already include 'drm.h'. Although there is no harm in including this
file again, it is also not necessary. Furthermore, the header file is
located under 'include/uapi/drm' so ideally the full path would be
used to be explicit. For now, just remove from gem.c.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250428153435.1013101-1-jonathanh@nvidia.com

drm/tegra: Assign plane type before registration

Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.

Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f27 ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com

drm/i915/rps: fix stale reference to i915->irq_lock

The RPS code has been switched from using i915->irq_lock to gt->irq_lock
years ago in commit d762043f7ab1 ("drm/i915: Extract GT powermanagement
interrupt handling"). Fix the stale comment referencing i915->irq_lock,
which has also ceased to exist.

Reported-by: Gustavo Sousa <gustavo.sousa@intel.com>
Closes: https://lore.kernel.org/r/174656703321.1401.8627403371256302933@intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250507083136.1987023-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/gt: Remove const from struct i915_wa list allocation

In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)

The assigned type is "struct i915_wa *". The returned type, while
technically matching, will be const qualified. As there is no general
way to remove const qualifiers, adjust the allocation type to match
the assignment.

Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250426061357.work.749-kees@kernel.org

drm/i915/irq: move i915->irq_lock to display->irq.lock

Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.

This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.

Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.

With the i915 references gone, we can make a handful more files
independent of i915_drv.h.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/rps: refactor display rps support

Make the gt rps code and display irq code interact via
intel_display_rps.[ch], instead of direct access. Add no-op static
inline stubs for xe instead of having a separate build unit doing
nothing. All of this clarifies the interfaces between i915 core and
display.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/ef2a46dc8f30b72282494f54e98cb5fed7523b58.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: make i915_enable_asle_pipestat() static

With all users of i915_enable_asle_pipestat() inside
intel_display_irq.c, we can make the function static.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/9511e368c5244aaa04cc45f46e2425737acd29fb.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: split out i965_display_irq_postinstall()

Split out i965_display_irq_postinstall() similar to other platforms.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/5d404dcd0c606d1cb11f2e09c45e151a75b5b2c6.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: split out i915_display_irq_postinstall()

Split out i915_display_irq_postinstall() similar to other platforms.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/11de06206ff10c27104b0ac3efda085bf4c1f1a6.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: move locking inside vlv_display_irq_postinstall()

All users of vlv_display_irq_postinstall() outside of
intel_display_irq.c have a lock/unlock pair. Move the locking inside the
function. Add an unlocked variant for internal use, similar to the
_vlv_display_irq_reset() and vlv_display_irq_reset() functions.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/93ea785d2d9bdb4e18328aa42a00a492d9d783c0.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: move locking inside valleyview_{enable, disable}_display_irqs()

All users of valleyview_enable_display_irqs() and
valleyview_disable_display_irqs() have a lock/unlock pair. Move the
locking inside the functions.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/bb6d941c47260aea11e4af5d52572b0e5f139929.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/irq: move locking inside vlv_display_irq_reset()

All users of vlv_display_irq_reset() have a lock/unlock pair. Move the
locking inside the function.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/0f8176b777fa24921458996f7d6f982f955a52f6.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/crtc: pass struct intel_display to DISPLAY_VER()

Drop another reference to struct drm_i915_private.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/cb84073ff92a99e74ff6dfb8e395365b7cbb5332.1746529001.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: fix a comment referencing struct drm_i915_private

struct intel_vbt_data is within struct intel_display nowadays, not
struct drm_i915_private.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/b7a9a7c64f41cf61749a42ed4102e04b500fde83.1746529001.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: remove struct drm_i915_private forward declaration

Remove unused struct drm_i915_private forward declaration from
intel_display_core.h. Sort and group forward declarations while at it.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/fbccf45339a61711b377b35fd479a67b378c5571.1746529001.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: remove dependency on i915_drv.h

Remove final references to struct drm_i915_private and drop dependency
on i915_drv.h.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/2cee3cd9d7d9bec8dfe9c21fe5d172b1843b3d97.1746529001.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

checkpatch: remove %p4cn

%p4cn was recently removed and replaced by %p4chR in vsprintf. So,
remove the check for %p4cn from checkpatch.pl.

Fixes: 37eed892cc5f ("vsprintf: Use %p4chR instead of %p4cn for reading data in reversed host ordering")
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/PN3PR01MB959760B89BF7E4B43852700CB8832@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

drm/panel: simple: Update timings for AUO G101EVN010

Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.

Previous mode-based timings resulted in horizontal display shift.

Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

drm/vkms: Adjust vkms_state->active_planes allocation type

In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)

The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.

Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b1865873651 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>

Merge drm/drm-next into drm-misc-next

Backmerging drm-next to get fixes from v6.15-rc5.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

BackMerge tag 'v6.15-rc5' into drm-next

Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/xe/gsc: do not flush the GSC worker from the reset path

The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.

The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:

1) GSC proxy init: this only happens once immediately after GSC FW load
   and does not support being interrupted. The only way to recover from
   an interruption of the proxy init is to do an FLR and re-load the GSC.

2) GSC proxy request: this can happen in response to a request that
   the driver sends to the GSC. If this is interrupted, the GSC FW will
   timeout and the driver request will be failed, but overall the GSC
   will keep working fine.

Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).

Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.

v2: fix spelling in commit msg, rename waiter function (Julia)

Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com

docs: backlight: Clarify `actual_brightness`

Currently userspace software systemd treats `brightness` and
`actual_brightness` identically due to a bug found in an out of tree
driver.

This however causes problems for in-tree drivers that use brightness
to report user requested `brightness` and `actual_brightness` to report
what the hardware actually has programmed.

Clarify the documentation to match the behavior described in commit
6ca017658b1f9 ("[PATCH] backlight: Backlight Class Improvements").

Cc: Lee Jones <lee@kernel.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: richard.purdie@linuxfoundation.org
Link: https://github.com/systemd/systemd/pull/36881
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250415192101.2033518-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

drm/bridge: anx7625: change the gpiod_set_value API

Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:

[    5.690534] Call trace:
[    5.690536]  gpiod_set_value+0x40/0xa4
[    5.690540]  anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[    5.690545]  __rpm_callback+0x48/0x1d8
[    5.690549]  rpm_callback+0x6c/0x78

Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

drm/bridge: anx7625: fix anx7625_sink_detect() to return correct hpd status

In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
that supports hot-plugging. This way, it verifies the hpd_status
variable before sending the status to the connector.

In case of eDP, anx7625_bridge_detect() will not get called because
the bridge->ops condition in anx7625_link_bridge() will not be
satisfied. Since anx7625_sink_detect() is called from
anx7625_bridge_detect(), this results in the sink_detect logic not
being executed for eDP.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

drm/bridge: anx7625: fix drm_bridge ops flags to support hot-plugging

The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

drm/bridge: anx7625: enable HPD interrupts

When the device enters the suspend state, it prevents
HPD interrupts from occurring. To address this, implement
.hpd_enable() and .hpd_disable() callbacks functions of
the drm_bridge.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-4-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

drm/i915/display: implement wa_14022269668

As per the WA, fbc stride need to be programmed always for bmg.
Display driver handles the need to program the fbc stride using
the override stride. So ensure that we always get the override
stride in case of bmg

v2: re-phrase the commit message.

Bspec: 74212
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250428115554.116780-1-vinod.govindapillai@intel.com

drivers: gpu: drm: panel: Add BOE TD4320

Add driver for BOE TD4320 DSI panel, used in Xiaomi Redmi Note 7
mobile phone.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-2-7625e62d62b2@mainlining.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-2-7625e62d62b2@mainlining.org

dt-bindings: display: panel: Add BOE TD4320

Document BOE TD4320 6.3" 2340x1080 panel
found in Xiaomi Redmi Note 7 smartphone.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-1-7625e62d62b2@mainlining.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-1-7625e62d62b2@mainlining.org

Linux 6.15-rc5

Merge tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "Just a couple of build fixes on arm64"

* tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf tools: Fix in-source libperf build
  perf tools: Fix arm64 build by generating unistd_64.h

Merge tag 'trace-v6.15-rc4' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Fix read out of bounds bug in tracing_splice_read_pipe()

   The size of the sub page being read can now be greater than a page.
   But the buffer used in tracing_splice_read_pipe() only allocates a
   page size. The data copied to the buffer is the amount in sub buffer
   which can overflow the buffer.

   Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
   amount copied to the buffer to a max of PAGE_SIZE.

 - Fix the test for NULL from "!filter_hash" to "!*filter_hash"

   The add_next_hash() function checked for NULL at the wrong pointer
   level.

 - Do not use the array in trace_adjust_address() if there are no
   elements

   The trace_adjust_address() finds the offset of a module that was
   stored in the persistent buffer when reading the previous boot buffer
   to see if the address belongs to a module that was loaded in the
   previous boot. An array is created that matches currently loaded
   modules with previously loaded modules. The trace_adjust_address()
   uses that array to find the new offset of the address that's in the
   previous buffer. But if no module was loaded, it ends up reading the
   last element in an array that was never allocated.

   Check if nr_entries is zero and exit out early if it is.

 - Remove nested lock of trace_event_sem in print_event_fields()

   The print_event_fields() function iterates over the ftrace_events
   list and requires the trace_event_sem semaphore held for read. But
   this function is always called with that semaphore held for read.

   Remove the taking of the semaphore and replace it with
   lockdep_assert_held_read(&trace_event_sem)

* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Do not take trace_event_sem in print_event_fields()
  tracing: Fix trace_adjust_address() when there is no modules in scratch area
  ftrace: Fix NULL memory allocation check
  tracing: Fix oob write in trace_seq_to_buffer()

Merge tag 'parisc-for-6.15-rc5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
 "Fix a double SIGFPE crash"

* tag 'parisc-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix double SIGFPE crash

parisc: Fix double SIGFPE crash

Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler.  Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.

When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0.  The latter cancels all pending traps.  Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.

The issue can be reproduced with this test program:

root@parisc:~# cat fpe.c

static void fpe_func(int sig, siginfo_t *i, void *v) {
        sigset_t set;
        sigemptyset(&set);
        sigaddset(&set, SIGFPE);
        sigprocmask(SIG_UNBLOCK, &set, NULL);
        printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}

int main() {
        struct sigaction action = {
                .sa_sigaction = fpe_func,
                .sa_flags = SA_RESTART|SA_SIGINFO };
        sigaction(SIGFPE, &action, 0);
        feenableexcept(FE_OVERFLOW);
        return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}

root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
 Floating point exception

root@parisc:~# strace -f ./a.out
 execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
 ...
 rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
 +++ killed by SIGFPE +++
 Floating point exception

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org

Merge tag 'edac_urgent_for_v6.15_rc5' of git://git./linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

 - Test the correct structure member when handling correctable errors
   and avoid spurious interrupts, in altera_edac

* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/altera: Set DDR and SDMMC interrupt mask before registration
  EDAC/altera: Test the correct error reg offset

Merge tag 'x86-urgent-2025-05-04' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Ingo Molnar:
 "Fix SEV-SNP memory acceptance from the EFI stub for guests
  running at VMPL >0"

* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/sev: Support memory acceptance in the EFI stub under SVSM

Merge tag 'perf-urgent-2025-05-04' of git://git./linux/kernel/git/tip/tip

Pull misc perf fixes from Ingo Molnar:

 - Require group events for branch counter groups and
   PEBS counter snapshotting groups to be x86 events.

 - Fix the handling of counter-snapshotting of non-precise
   events, where counter values may move backwards a bit,
   temporarily, confusing the code.

 - Restrict perf/KVM PEBS to guest-owned events.

* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
  perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
  perf/x86/intel: Check the X86 leader for pebs_counter_event_group
  perf/x86/intel: Only check the group flag for X86 leader

Merge tag 'irq-urgent-2025-05-04' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:

 - Prevent NULL pointer dereference in msi_domain_debug_show()

 - Fix crash in the qcom-mpm irqchip driver when configuring
   interrupts for non-wake GPIOs

* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
  genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()

drm/rockchip: inno-hdmi: Fix video timing HSYNC/VSYNC polarity setting for rk3036

The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed
from the HDMI protocol analyzer that the H/V front/back timing
output by RK3036 HDMI are currently not in line with the specifications.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-5-andyshrk@163.com

drm/rockchip: inno-hdmi: Simplify error handler with dev_err_probe

Use dev_err_probe simplify the error handle.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-4-andyshrk@163.com

dt-bindings: display: rockchip,inno-hdmi: Document GRF for RK3036 HDMI

HDMI on RK3036 use GRF control the HSYNC/VSYNC polarity, but this part
is missing when it first landing upstream.

Document that it is mandatory for RK3036 HDMI.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-3-andyshrk@163.com

dt-bindings: display: rockchip,inno-hdmi: Fix Document of RK3036 compatible

The RK3036 HDMI DDC bus requires it's PHY's reference clock to be enabled
first before normal DDC communication can be carried out.

Therefore, both RK3036 and RK3128 HDMI require two identical clocks.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-2-andyshrk@163.com

drm/rockchip: rk3066_hdmi: switch to drm bridge

Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.

Note: I don't have the hardware to test this driver, so for now
I can only do the compilation test.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3066-marsboard
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250428102309.1501986-1-andyshrk@163.com

x86/boot/sev: Support memory acceptance in the EFI stub under SVSM

Commit:

  d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")

provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.

Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.

Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
 "Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
  is_midr_in_range_list() reads beyond the end of these arrays"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays

Merge tag 'i2c-for-6.15-rc5' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:

 - imx-lpi2c: fix clock error handling sequence in probe

* tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: Fix clock count when probe defers

Merge tag 'sound-6.15-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A bunch of small fixes.  Mostly driver specific.

   - An OOB access fix in core UMP rawmidi conversion code

   - Fix for ASoC DAPM hw_params widget sequence

   - Make retry of usb_set_interface() errors for flaky devices

   - Fix redundant USB MIDI name strings

   - Quirks for various HP and ASUS models with HD-audio, and
     Jabra Evolve 65 USB-audio

   - Cirrus Kunit test fixes

   - Various fixes for ASoC Intel, stm32, renesas, imx-card, and
     simple-card"

* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ASoC: amd: ps: fix for irq handler return status
  ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
  ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
  ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
  ASoC: stm32: sai: add a check on minimal kernel frequency
  ASoC: stm32: sai: skip useless iterations on kernel rate loop
  ALSA: hda/realtek - Add more HP laptops which need mute led fixup
  ALSA: hda/realtek: Fix built-mic regression on other ASUS models
  ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
  ALSA: usb-audio: Fix duplicated name in MIDI substream names
  ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
  ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
  ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
  ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
  ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
  ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
  ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
  ASoC: amd: acp: Fix NULL pointer deref on acp resume path
  ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
  ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
  ...

dt-bindings: display: ltk500hd1829: add port property

The panel can be connected to via graph nodes, so allow the port property.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-3-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

dt-bindings: display: ltk050h3146w: add port property

The panel can be connected to via graph nodes, so allow the port property.

This fixes dtc checker warnings like:
>> arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
    from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
   arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504300218.VDqQqGTT-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-2-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Merge tag 'spi-fix-v6.15-rc4' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A fairly small pile of fixes, plus one new compatible string addition
  to the Synopsis driver for a new platform.

  The most notable thing is the fix for divide by zeros in spi-mem if an
  operation has no dummy bytes"

* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra114: Don't fail set_cs_timing when delays are zero
  spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
  spi: spi-mem: Add fix to avoid divide error
  spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
  spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
  spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
  spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()

drm/i915/de: drop drm_i915_private compat wrappers from intel_de_*()

All the users of intel_de_*() functions now pass in struct
intel_display, and we can remove the __to_intel_display() _Generic()
compat wrappers.

Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/3aac42eab7b03c791afee940d0a647770afc99c5.1746175756.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdmi: convert rest of intel_hdmi.c to struct intel_display

Remove the last uses of struct drm_i915_private from intel_hdmi.c, and
drop the dependency on i915_drv.h.

v2: Rebase

Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/24183605ac919ca115b1b25fa386643409814c82.1746175756.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpt: convert intel_dpt_common.c to struct intel_display

Remove the last uses of struct drm_i915_private from intel_dpt_common.c,
and drop the dependency on i915_drv.h.

Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/7bc340e05c535479b0f0698372835ba04fd5c8f8.1746175756.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/gpusvm: remove unused pages pointer

The pages pointer is not used, remove it.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250422095943.1198393-1-dafna.hirschfeld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'pm-6.15-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix three recent regressions, two in cpufreq and one in the
  Intel Soundwire driver, and an unchecked MSR access in the
  intel_pstate driver:

   - Fix a recent regression causing systems where frequency tables are
     used by cpufreq to have issues with setting frequency limits
     (Rafael Wysocki)

   - Fix a recent regressions causing frequency boost settings to become
     out-of-sync if platform firmware updates the registers associated
     with frequency boost during system resume (Viresh Kumar)

   - Fix a recent regression causing resume failures to occur in the
     Intel Soundwire driver if the device handled by it is in runtime
     suspend before a system-wide suspend (Rafael Wysocki)

   - Fix an unchecked MSR aceess in the intel_pstate driver occurring
     when CPUID indicates no turbo, but the driver attempts to enable
     turbo frequencies due to a misleading value read from an MSR
     (Srinivas Pandruvada)"

* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
  soundwire: intel_auxdevice: Fix system suspend/resume handling
  cpufreq: Fix setting policy limits when frequency tables are used
  cpufreq: ACPI: Re-sync CPU boost state on system resume

Merge tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

 - fix posix mkdir error to ksmbd (also avoids crash in
   cifs_destroy_request_bufs)

 - two smb1 fixes: fixing querypath info and setpathinfo to old servers

 - fix rsize/wsize when not multiple of page size to address DIO
   reads/writes

* tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: ensure aligned IO sizes
  cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function
  cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()
  smb: client: fix zero length for mkdir POSIX create context

Merge tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a
  bunch of vblank fixes, then a bunch of small fixes across the board.

  Seems about the right level for this time in the release cycle.

  ttm:
   - docs warning fix

  kunit
   - fix leak in shmem tests

  fdinfo:
   - driver unbind race fix

  amdgpu:
   - Fix possible UAF in HDCP
   - XGMI dma-buf fix
   - NBIO 7.11 fix
   - VCN 5.0.1 fix

  xe:
   - EU stall locking fix and disabling on VF
   - Documentation fix kernel version supporting hwmon entries
   - SVM fixes on error handling

  i915:
   - Fix build for CONFIG_DRM_I915_PXP=n

  nouveau:
   - fix race condition in fence handling

  ivpu:
   - interrupt handling fix
   - D0i2 test mode fix

  adp:
   - vblank fixes

  mipi-dbi:
   - timing fix"

* tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
  drm/gpusvm: set has_dma_mapping inside mapping loop
  drm/xe/hwmon: Fix kernel version documentation for temperature
  drm/xe/eustall: Do not support EU stall on SRIOV VF
  drm/xe/eustall: Resolve a possible circular locking dependency
  drm/amdgpu: Add DPG pause for VCN v5.0.1
  drm/amdgpu: Fix offset for HDP remap in nbio v7.11
  drm/amdgpu: Fail DMABUF map of XGMI-accessible memory
  drm/amd/display: Fix slab-use-after-free in hdcp
  drm/mipi-dbi: Fix blanking for non-16 bit formats
  drm/tests: shmem: Fix memleak
  drm/xe/guc: Fix capture of steering registers
  drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc()
  drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
  drm: adp: Remove pointless irq_lock spin lock
  drm: adp: Enable vblank interrupts in crtc's .atomic_enable
  drm: adp: Handle drm_crtc_vblank_get() errors
  drm: adp: Use spin_lock_irqsave for drm device event_lock
  drm/fdinfo: Protect against driver unbind
  drm/ttm: fix the warning for hit_low and evict_low
  accel/ivpu: Fix the D0i2 disable test mode
  ...

Merge branch 'pm-cpufreq'

Merge cpufreq fixes for 6.15-rc5:

 - Fix a recent regression causing systems where frequency tables are
   used by cpufreq to have issues with setting frequency limits (Rafael
   Wysocki).

 - Fix a recent regressions causing frequency boost settings to become
   out-of-sync if platform firmware updates the registers associated
   with them during system resume (Viresh Kumar).

 - Fix an unchecked MSR aceess in the intel_pstate driver occurring when
   CPUID indicates no turbo, but the driver attempts to enable turbo
   frequencies due to a misleading value read from an MSR (Srinivas
   Pandruvada).

* pm-cpufreq:
  cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
  cpufreq: Fix setting policy limits when frequency tables are used
  cpufreq: ACPI: Re-sync CPU boost state on system resume

irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs

On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:

 root@rb1:~# gpiomon -c gpiochip1 10
   irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
   Unable to handle kernel paging request at virtual address ffff8000a1dc3820
   Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
   pc : mpm_set_type+0x80/0xcc
   lr : mpm_set_type+0x5c/0xcc
   Call trace:
    mpm_set_type+0x80/0xcc (P)
    qcom_mpm_set_type+0x64/0x158
    irq_chip_set_type_parent+0x20/0x38
    msm_gpio_irq_set_type+0x50/0x530
    __irq_set_trigger+0x60/0x184
    __setup_irq+0x304/0x6bc
    request_threaded_irq+0xc8/0x19c
    edge_detector_setup+0x260/0x364
    linereq_create+0x420/0x5a8
    gpio_ioctl+0x2d4/0x6c0

Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.

Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two minor updates, both in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Remove redundant query_complete trace
  scsi: myrb: Fix spelling mistake "statux" -> "status"

Merge tag 'block-6.15-20250502' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
     - fix queue unquiesce check on PCI slot_reset (Keith Busch)
     - fix premature queue removal and I/O failover in nvme-tcp (Michael
       Liang)
     - don't restore null sk_state_change (Alistair Francis)
     - select CONFIG_TLS where needed (Alistair Francis)
     - always free derived key data (Hannes Reinecke)
     - more quirks (Wentao Guan)

 - ublk zero copy fix

 - ublk selftest fix for UBLK_F_NEED_GET_DATA

* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
  nvmet-auth: always free derived key data
  nvmet-tcp: don't restore null sk_state_change
  nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
  nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
  nvme-tcp: fix premature queue removal and I/O failover
  nvme-pci: add quirks for WDC Blue SN550 15b7:5009
  nvme-pci: add quirks for device 126f:1001
  nvme-pci: fix queue unquiesce check on slot_reset
  ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
  ublk: enhance check for register/unregister io buffer command
  ublk: decouple zero copy from user copy
  selftests: ublk: fix UBLK_F_NEED_GET_DATA

Merge tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux

Pull io_uring fix from Jens Axboe:
 "Just a single fix, annotating the fdinfo side SQ/CQ head/tail reads
  with data_race() as they are known racy.

  Only serves to silence syzbot testing, by definition these debug
  outputs are going to be racy as they may change as soon as we've read
  them"

* tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux:
  io_uring/fdinfo: annotate racy sq/cq head/tail reads

Merge tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Lots of assorted small fixes...

   - Some repair path fixes, a fix for -ENOMEM when reconstructing lots
     of alloc info on large filesystems, upgrade for ancient 0.14
     filesystems, etc.

   - Various assert tweaks; assert -> ERO, ERO -> log the error in the
     superblock and continue

   - casefolding now uses d_ops like on other casefolding filesystems

   - fix device label create on device add, fix bucket array resize on
     filesystem resize

   - fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"

* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
  bcachefs: Remove incorrect __counted_by annotation
  bcachefs: add missing sched_annotate_sleep()
  bcachefs: Fix __bch2_dev_group_set()
  bcachefs: Kill ERO for i_blocks check in truncate
  bcachefs: check for inode.bi_sectors underflow
  bcachefs: Kill ERO in __bch2_i_sectors_acct()
  bcachefs: readdir fixes
  bcachefs: improve missing journal write device error message
  bcachefs: Topology error after insert is now an ERO
  bcachefs: Use bch2_kvmalloc() for journal keys array
  bcachefs: More informative error message when shutting down due to error
  bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
  bcachefs: btree_node_data_missing is now autofix
  bcachefs: Don't generate alloc updates to invalid buckets
  bcachefs: Improve bch2_dev_bucket_missing()
  bcachefs: fix bch2_dev_buckets_resize()
  bcachefs: Add upgrade table entry from 0.14
  bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
  bcachefs: Add missing utf8_unload()
  bcachefs: Emit unicode version message on startup
  ...

Merge tag 'pinctrl-v6.15-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Fix potential NULL dereference in the i.MX driver

 - Fix the pull up/down resistor values in the Meson driver

 - Fix the mapping of the PHY LED pins in the Airhoa driver

 - Fix EINT interrupts on older controllers and a debounce value issue
   in the Mediatek driver

 - Fix an erronoeus PINGROUP define in the Qualcomm driver

* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Fix PINGROUP definition for sm8750
  pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
  pinctrl: mediatek: Fix new design debounce issue
  pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
  pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
  pinctrl: meson: define the pull up/down resistor value as 60 kOhm
  pinctrl: imx: Return NULL if no group is matched and found

Merge tag 'iommu-fixes-v6.15-rc4' of git://git./linux/kernel/git/iommu/linux

Pull iommu fixes from Joerg Roedel:
 "ARM-SMMU fixes:
   - Fix broken detection of the S2FWB feature
   - Ensure page-size bitmap is initialised for SVA domains
   - Fix handling of SMMU client devices with duplicate Stream IDs
   - Don't fail SMMU probe if Stream IDs are aliased across clients

  Intel VT-d fixes:
   - Add quirk for IGFX device
   - Revert an ATS change to fix a boot failure

  AMD IOMMU:
   - Fix potential buffer overflow

  Core:
   - Fix for iommu_copy_struct_from_user()"

* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
  iommu/vt-d: Revert ATS timing change to fix boot failure
  iommu: Fix two issues in iommu_copy_struct_from_user()
  iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
  iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
  iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
  iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
  iommu/arm-smmu-v3: Add missing S2FWB feature detection

Merge tag 'slab-for-6.15-rc5' of git://git./linux/kernel/git/vbabka/slab

Pull slab fix from Vlastimil Babka:

 - Stable fix to avoid bugs due to leftover obj_ext after allocation
   profiling is disabled at runtime (Zhenhua Huang)

* tag 'slab-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm, slab: clean up slab->obj_exts always

Merge tag 'i2c-host-fixes-6.15-rc5' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.15-rc5

- imx-lpi2c: fix error handling sequence in probe

drm/panic: Use a decimal fifo to avoid u64 by u64 divide

On 32bits ARM, u64/u64 is not supported [1], so change the algorithm
to use a simple fifo with decimal digits as u8 instead.
This is slower but should compile on all architecture.

Link: https://lore.kernel.org/dri-devel/CANiq72ke45eOwckMhWHvmwxc03dxr4rnxxKvx+HvWdBLopZfrQ@mail.gmail.com/
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/dri-devel/CANiq72ke45eOwckMhWHvmwxc03dxr4rnxxKvx+HvWdBLopZfrQ@mail.gmail.com/
Fixes: ccb8ce526807 ("ARM: 9441/1: rust: Enable Rust support for ARMv7")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250418165059.560503-1-jfalempe@redhat.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>

drm/i915/hdcp: drop unnecessary include from intel_hdcp_gsc.h

Nothing in intel_hdcp_gsc.c needs linux/err.h. Remove it.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/26ae2c04554fc8dd76d2fdb0f2b0a63cb1fed98f.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: pass struct drm_device to driver specific HDCP GSC code

The driver specific HDCP GSC code will eventually be part of the driver
cores rather than display. Remove the struct intel_display references
from them, and pass struct drm_device instead.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/bf9aa8e44e18eef41e3077a2966935b4e2649b62.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: simplify HDCP GSC firmware usage selection

Just localize the GSC decision inside intel_hdcp.c, and deduplicate the
conditions.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/a1d031bfbff7073e576dfe8d3d3d5a28d7bb2c15.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: switch the HDCP GSC message interface from u8* to void*

The in/out buffers are just opaque data, and don't need to be considered
u8*. Switching to void* lets us drop a ton of unnecessary casts.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/ea005adb713e85b797d83204c80de0a2a8e5ab47.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: pass the context to the HDCP GSC message interface

The opaque HDCP GSC context nicely abstracts the differences between
drivers. Pass that instead of struct drm_i915_private or struct
xe_device to intel_hdcp_gsc_msg_send(). We can store the driver specific
data in the context.

This lets us drop the dependency on i915_drv.h from
intel_hdcp_gsc_message.c.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/df1653212f9014e717701b017e78e0017884b870.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: rename HDCP GSC context alloc/free functions

Name the functions intel_hdcp_gsc_context_alloc() and
intel_hdcp_gsc_context_free() for consistency.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/c6e25686ed20b5fdea9a59faf6a64a7312a075b0.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: rename struct intel_hdcp_gsc_message to intel_hdcp_gsc_context

It's really about the context more than about the message.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/ca0a802a81ba4e96e7c40646a32386d4351d6ff4.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: split HDCP GSC message alloc/save responsibilities

Allocate and initialize the HDCP GSC message in
intel_hdcp_gsc_hdcp2_init() as before, but store the pointer to
display->hdcp.hdcp_message in the caller. Similarly, pass in the pointer
to intel_hdcp_gsc_free_message().

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/a74fcc941126bf92d12115b5faf4f75099e26242.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: deduplicate and refactor HDCP GSC ops initialization

The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.

There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.

We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: remove duplicate declarations

intel_hdcp_gsc_msg_send() and intel_hdcp_gsc_check_status() are declared
in intel_hdcp_gsc.h.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/f300d7cdb2af681291df938194f575f05c2c41bc.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: Implement wa_14024400148

Workaround recommend use polling method
for pm_demand to finish as to avoid timeout.

v2: Add polling method within pmdemand_wait.
    Update error message[Jani]

Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250416152044.2668249-1-nemesa.garg@intel.com

drm/i915/error: drop dmesg suggestion to file bugs on GPU hangs

We haven't updated the DRIVER_TIMESTAMP since commit 3570bd989acc
("drm/i915: Update DRIVER_DATE to 20230929") 1½ years ago. Before then,
the previous update was commit 139caf7ca286 ("drm/i915: Update
DRIVER_DATE to 20201103") 4+ years ago. The DRIVER_DATE has also been
removed altogether.

We've used the DRIVER_TIMESTAMP to log suggestions to file bugs on GPU
hangs when they happen on a driver less than six months old. Combined
with the sporadic DRIVER_TIMESTAMP updates, we really haven't logged the
suggestions for years.

Just stop logging the suggestion to file bugs altogether, and remove
DRIVER_TIMESTAMP. This doesn't really change anything wrt to logging GPU
errors or how we handle bugs. And effectively we already stopped logging
the message a year ago when we stopped updating DRIVER_TIMESTAMP.

Instead, add an unconditional message about the GPU error state
location.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429115055.2133143-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/backlight: drop dmesg suggestion to file bugs

Drop the FDO_BUG_URL from the source, and stop suggesting to file bugs
on DPCD backlight issues. We don't do this anywhere else in display,
this isn't a special snowflake.

As a consequence, also drop the dependency on i915_utils.h from
intel_dp_aux_backlight.c.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429112534.2121656-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm: Remove unused function rcar_cmm_write

The function are defined in the rcar_cmm.c file, but not called
elsewhere, so delete the unused function.

drivers/gpu/drm/renesas/rcar-du/rcar_cmm.c:35:19: warning: unused function 'rcar_cmm_read'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9364
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240619075436.86407-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

drm: rcar-du: Fix memory leak in rcar_du_vsps_init()

The rcar_du_vsps_init() doesn't free the np allocated by
of_parse_phandle_with_fixed_args() for the non-error case.

Fix memory leak for the non-error case.

While at it, replace the label 'error'->'done' as it applies to non-error
case as well and update the error check condition for rcar_du_vsp_init()
to avoid breakage in future, if it returns positive value.

Fixes: 3e81374e2014 ("drm: rcar-du: Support multiple sources from the same VSP")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20231116122424.80136-1-biju.das.jz@bp.renesas.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>