drm/omap: add GEM support for tiled/dmm buffers

TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
   for hw initiators that cannot otherwise support discontiguous
   buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
   cases to provide rotation and reduce memory bandwidth for hw
   initiators that tend to access data in 2d block patterns.

For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings.  For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap.  For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer.  But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU.  And non-page aligned userspace buffer mapping is evil.

To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace.  Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/omap: DMM/TILER support for OMAP4+ platform

Dynamic Memory Manager (DMM) is a hardware block in the OMAP4+
processor that contains at least one TILER instance.  TILER, or
Tiling and Isometric Lightweight Engine for Rotation, provides
IOMMU capabilities through the use of a physical address translation
table.  The TILER also provides zero cost rotation and mirroring.

The TILER provides both 1D and 2D access by providing different views
or address ranges that can be used to access the physical memory that
has been mapped in through the PAT.  Access to the 1D view results in
linear access to the underlying memory.  Access to the 2D views result
in tiled access to the underlying memory resulted in increased
efficiency.

The TILER address space is managed by a tiler container manager (TCM)
and allocates the address space through the use of the Simple Tiler
Allocation algorithm (SiTA).  The purpose of the algorithm is to keep
fragmentation of the address space as low as possible.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Revert changes from previous commit

In commit 834d0ee317b (uintxy_t removal) not all changes were trival text replacements, some converted u64 -> dma_addr_t.
In some configurations dma_addr_t is a u32, meaning that some bit operations cause build warnings. From Randy Dunlap:

----------------
on i386 (X86_32) builds:

drivers/staging/et131x/et131x.c:2483:8: warning: right shift count >= width of type
drivers/staging/et131x/et131x.c:2531:8: warning: right shift count >= width of type
----------------

Removed these by reverting dma_addr_t back to u64 types, as well as
reverting some other non-trivial changes from the aforementioned commit.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: olpc_dcon.c: obsolete use of strict_stroul

As Dan mentioned, dcon_write() will only write u16 values. The
appropriate parts have been changed. As a result of module_param()
not accepting u16 as a valid data type, ushort is used.

Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: olpc_dcon.c: obsolete use of strict_strtoul

As noted by the checkpatch script, strict_strtoul is obsolete. Unsigned
longs are used, so it seems good to take kstrtoul.

Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: updating mei driver documentation

The following changes were made in the document:

1. Update URLs to working links
2. remove old information about module parameters
3. Add IOCTL information.
4. cleanups and fix spelling
5. driver changed from character device to misc character device

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/mei: fix failure for multiple mei clients connection

The irq handler processes queued mei clients connect requests, which were
not transferred to the device in ioctl context due to unavailability
of the write buffer.

The handler may transfer the connection request only if there is
no other ongoing  requests for the same mei id.
This condition was implemented inversely which depending on
the write buffer availability lead to seemingly random
failures during connection attempts.

Cc: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Natalia Ovsyanikov <natalia.ovsyanikov@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/mei: Don't check if loop cursor is null

list_for_each_entry_safe(pos, next, &head, list)
if (pos) {
....
}

This check isn't needed.  The list cursor in a list_for_each()
loop is always a valid pointer

Cc: Oren Weil <oren.jer.weil@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: olpc_dcon: ->read_status() API change

Change ->read_status() by separating the error handling and the
status bits.  This also fixes a signedness bug in dcon_interrupt()
that would break the error handling.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Add a missing GFP_KERNEL specifier in zram_init_device()

The allocation of zram->compress_buffer is misssing a GFP_* specifier.
This is equivalent to GFP_NOWAIT but it is more likely a omission.
Since the allocation just above it uses GFP_KERNEL, there is no reason
to use GFP_NOWAIT here. Therefore, add GFP_KERNEL.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram/zram_sysfs.c: Fixed call of obsolete function strict_strtoX

As reported by checkpatch.pl strict_strtoX is obsolet and should be
replaced by kstrtoX.

Signed-off-by: Sergey Datsevich <srgdts@gmail.com>
Signed-off-by: Bjoern Meier <bjoernmeier@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Fix a bug in create_bounce_buffer()

Set the length field of the scatter gather elements correctly when we create
the bounce buffer. When we use the bounce buffer for a "write" operation,
the act of copying to the bounce buffer, correctly deals with this issue.
However, on the "read" side, the current code was not correctly setting
the buffer length. Fix this bug. Note that when we copy from the bounce
buffer (for the read case), the amount we copy is controlled by the original
scatter gather list given to the driver.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Dadok Milan <dadok@kvados.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: bcm: led_control.c: breaking of long lines

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: bcm: led_control.c: fix parens/braces

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: bcm: led_control.c: fix comments

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: bcm: led_control.c: fix indentation

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: bcm: led_control.c: fix whitespaces

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Alter return value for copy_to/from_user() to "return -EFAULT" when an error occurs.

In this clean up patch, I altered functions: copy_to/
from_user() to return -EFAULT when an error occurs.
I also replaced break statements when an error occurs
from copy_to/from_user() with direct returns of -EFAULT.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Alter code to move error handling closer to the calls; and remove white space, IOCTL_BCM_NVM_WRITE.

This is a clean up patch for IOCTL_BCM_NVM_WRITE
that replaces the assignment of the Status
variable with direct returns of the error code,
replaces the break statements with direct returns,
and removes a white space.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Fix double free of 'pReadData' in IOCTL_BCM_NVM_WRITE.

This patch fixes a memory error in ioctl,
IOCTL_BCM_NVM_WRITE. While copying data to
user space, if an error occurs, pReadData
is freed. Then, at the end of the ioctl,
pReadData was being freed again.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/line6: refactor device information and add POD HD 500

This patch refactors the device information code and adds preliminary support for the POD HD 500 device.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/line6: Remove obsolete code

This patch removes experimental code which is no longer used.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6/midi.c: Fixed call of obsolete function strict_strtoul

The obsolete function strict_strtoul should be replaced by the kstrto*
functions.

In this context kstrtou16 should be use, as midi_mask_receive is only
used as unsigned short. All corresponding datatypes were adapted
accordingly.

Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6/midi.c: Fixed call of obsolete function strict_strtoul

The function strict_strtoul is obsolete and should be replaced by the
new kstrto* functions.

The variable midi_mask_transmit is only used as unsigned short and the
datatypes of all affected variables were adjusted accordingly.

Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: unlock on error in usbduxsigma_attach()

We should release the udev->sem lock before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: unlock on error in usbdux_ao_inttrig()

If we had an invalid trignum (anything other than zero is invalid) then
we returned without unlocking.  I've modified this function to just have
one return point.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: enable forcecrt2type as a module parameter

Enable forcecrt2type as a module parameter.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: enable forcecrt2type on XG21

Make "forcecrt2type" to apply also for XG21. The patch enables user to
switch LVDS LCD ON/OFF without the need to update the video BIOS.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete "userom" option

Delete a redundant option.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_table: delete XGI21_LCDCapList

Delete XGI21_LCDCapList. This data is display specific and does not
belong to the driver. It should be provided by the video BIOS.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: move XGI21_LVDSCapStruct into xgifb_video_info

Move the LVDS data into a device-specific data, and eliminate the global
variable usage.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: disable LVDS on XG27

XG27 has the second display output already hardcoded to disabled. Just
in case, ensure that it has the LVDS code paths disabled. This will
simplify the future cleanups.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete XGIfb_GetXG21LVDSData()

Delete XGIfb_GetXG21LVDSData() and code which duplicates
xgifb_read_vbios().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): rename to xgifb_read_vbios()

Rename the function to xgifb_read_vbios().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): copy only a single LVDS entry

Only a single LVDS table entry is needed by the driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): check the BIOS size

Check the BIOS size to avoid out of bounds array access. Disable LVDS
in case errors are detected.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: use u8 for video BIOS data

Use u8 for video BIOS data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete pjVirtualRomBase

Delete a redundant struct member.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete ROMAddr

Delete a redundant struct member.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: move video BIOS handling completely to ReadVBIOSTablData()

We need the video BIOS only on XG21 and only during the init, so let's
do everything at the same place.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: XGINew_GetXG21Sense(): eliminate video BIOS access

Remove video BIOS access from the routine, use the flag instead which
is initialized according to the BIOS data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): use a pointer to access the array

Use a pointer variable to make some lines shorter and more readable.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): rename pVideoMemory

Rename pVideoMemory to vbios, and also remove volatile at the same go.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): use ARRAY_SIZE

Use ARRAY_SIZE.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): rearrange code to avoid nesting

Rearrange code to avoid deep nesting.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: ReadVBIOSTablData(): avoid duplicating code

If the count (j) is 0xff, just do the loop once.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'work-next' into staging-next

staging:iio: Fix scan mask update

When updating the scan mask we have to check the actual scan mask for if the
channel is already enabled, not the matching scan mask from the available
scan masks. The bit will already be set there and as a result the actual
scan mask will not get updated and the channel stays disabled.

Also fix the return value of iio_scan_el_store which would return 1 instead of
the number of bytes written if the channel was already active in the scan mask.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'work-next' into staging-next

staging:iio: Fix sw_ring memory corruption

The sw_ring does not properly handle the case where the write pointer already
has wrapped around, the read pointer has not and the remaining buffer space at
the end is enough to fill the read buffer:

  +-----------------------------------+
  |     |              |##data##|     |
  +-----------------------------------+
     write_p        read_p

In this case the current code will copy all available data to the buffer and
as a result will write beyond the bounds of the buffer and cause a memory
corruption.

To address this issue this patch adds code to calculate the available buffer
space and makes sure that the number of bytes to copy does not exceed this
number. This allows the code which copies the data around to be simplified as
it only has to consider two cases: Read wraps around and read does not wrap
around.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: Fix typo

Fix a small typo in the iio_modifer enum.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer.h update struct buffer docs.

These docs have lagged recent developments.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer struct iio_buffer doesn't need an indio_dev pointer.

In all existing cases, the calls are coming from a location where
the indio_dev is already available.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer scrap to_iio_buffer as it no longer has meaning.

Now buffers do not have a specific dev structure, this is garbage.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer stop allowing for read_last callback.

No longer needed now we don't allow sysfs acccess to buffer data.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:ring_sw don't provide read last function.

No longer needed as we don't have drivers providing sysfs access
to buffered data.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 stop reading from buffer for sysfs access

No known use case and makes in kernel interface work more complex.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x stop reading from buffer for sysfs accesses

No known use case and makes in kernel interface work more complex.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7887 stop reading from buffer for sysfs access.

No known use case and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7993 stop reading from buffer for sysfs raw read.

No known usecase and makes in kernel interface work more complex.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 remove buffer access to data from sysfs read.

No known use case and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 remove buffer access for sysfs interfaces.

No known use case and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7476 scrap read from buffer for sysfs access.

No known use case and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7192 scrap read from buffer for sysfs access.

No known use case and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:lis3l02dq scrap reading from buffer for sysfs access.

No obvious usecase and complicates in kernel interface work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer remove unused owner field from struct iio_buffer

Legacy of having multiple chrdevs that never got cleaned up.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: scrap scan_count and ensure all drivers use active_scan_mask

Obviously drivers should only use this for pushing to buffers.
They need buffer->scan_mask for pulling from them post demux.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer move setup ops from buffer instance to iio_dev

These callbacks should not be buffer instance specific.
Hence move them out of the buffer.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: remove userspace access to bytes per datum.

There are no known reasons why userspace should want this value.
It can be established from the buffer description anyway.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer drop bpe field.

Has no remaining users.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 add datasheet_name entries.

Kind of obvious for this device but useful
for testing purposes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: core: add datasheet_name to chan_spec

This allows for matching against the name given
on a datasheet, however silly/inconsistent it might
be.

Useful for in kernel interfaces.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 correctly set channels as big endian.

Also, the differential channels should always have been signed.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 use new demuxing support.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: add demux optionally to path from device to buffer

This gives you only what you ask for which is handy
for some devices with weird scan combinations.

Routes all data flow through a core utility function.
That and this demuxing support will be needed to do
demuxing to multiple destinations in kernel.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: make iio_sw_buffer_preenable much more general.

Also introduces active_scan_mask storage to tell the core what is
really being currently captured from the device (different from
what is desired as often has bonus channels).

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: add hook to allow core to perform scan related config.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffer add a cache of the timestamp scan index.

Basically avoids looking it up lots of times.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:find iio channel from scan index util function

Useful for getting to the channel based on scan mask alone.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: Remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_register_driver() so
we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
 struct spi_driver _driver = {
  .driver = {
- .bus = &spi_bus_type,
  },
 };
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac: Add AD5380 driver

This patch adds support for the Analog Devices D5380, AD5381,
AD5382, AD5383, AD5384, AD5390, AD5391, AD5392 multi-channel
Digital to Analog Converters.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac: Add AD5764 driver

This patch adds support for the Analog Devices AD5764, AD5764R, AD5744, AD5744R
quad channel analog-to-digital converter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 actually make timestamp controllable

Previously timestamps were always on in this driver.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:generic_buffer example - handle endian differences

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:Documentation: cleanup properly in buffer handling code

Eating the endian description for now.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio: light sensor: Improve granularity of tsl2583 lux values.

When illuminance0_calibbias gets 4000 (for a 4x multiplier), we see lux
granularity of 4.  Reversing the order of the right shift and multiplication
retains the precision of the unadjusted lux value.

Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Added a range check for val in store_measurement_mode()

In sca3000_store_measurement_mode() we use val to and it with a mask.
This mask is only two bits long (as we are only interested in the
lowest two bits), so a value bigger than 3 was silently ignored so
far.

Now this function will return -EINVAL, if val is bigger than 3.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Changed data type of mask in store_measurement_mode() to u8

In sca3000_store_measurement_mode() we parse a value from a string
buffer via kstrtou8, and store the parsed value into a u8 after
and-ing it with mask.

As we are only interested in the lowest two bits here and mask is
initialized with a fixed value 0x03, mask may as well be a u8.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: update TODO file

Hank is no longer at Microsoft, so remove his email address as it
bounces.

Cc: KY Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove hv_mouse driver as it's now in the hid directory

This removes the hv_mouse driver as it's now in Jiri's HID tree in the
"proper" place.

Cc: KY Srinivasan <kys@microsoft.com>
Cc: Jiri Kosina <jikos@jikos.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: Remove typedefs

The use of typedefs is discouraged, remove them.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Implement per device memory pools

The current code implemented a per-HBA memory pool mechanism. For IDE disks
managed by this driver, there is a one to one correspondance between the
block device and the associated virtual HBA and since currently only IDE devices
can be the boot device, this addressed the deadlock issues that were raised during
the review process. This patch implements a per-lun memory pool mechanism.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Fix a bug in copy_from_bounce_buffer()

Fix a bug in copy_from_bounce_buffer().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Fix a bug in storvsc_command_completion()

Fix a bug in storvsc_command_completion() that leaks memory when scatter/gather
lists are used on the "write" side.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Cleanup storvsc_device_alloc()

The code in storvsc_device_alloc() is not needed as this would be
done by default. Get rid of it. We still keep the function as we use
this hook to allocate per-LUN memory pools in a later patch.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Disable clustering

Disable clustering, since the host side on Hyper-V requires that
each I/O element not exceed the page size. As part of this
cleanup, get rid of the function to merge bvecs, as the primary
reason for this function was to avoid having an element exceed
the page size.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net/hyperv: Add support for promiscuous mode setting

Add code to accept promiscuous mode setting, and pass it to
RNDIS filter.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net/hyperv: Fix long lines in netvsc.c

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6: NULL dereference in dev_err()

"line6" hasn't been set at this point and we should be using
&interface->dev instead.

Gcc would have complained about this if it weren't for the fact that we
initialized line6 to NULL.  I removed the initialization.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Properly add the hid device

We need to properly add the hid device to correctly initialize the
sysfs state. While this patch is against the staging tree; Jiri,
please pick up this patch as you merge the Hyper-V mouse driver.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>