drm/amd/display: dmub_cmd.h: add missing kernel-doc for enums

For enums that have a kernel-doc ("/**") comment block, add or correct
their kernel-doc to eliminate all kernel-doc enum warnings.

Some of these needed "struct" changed to "enum" in the kernel-doc header.
For a few of them, I changed the "/**" comment to a plain "/*"
comment since there was no kernel-doc content there.

Example:

Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_NONE' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_START' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_PREPARE' not described in enum 'dmub_fams2_allow_delay_check_mode'

All .o files are the same with or without this patch.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dmub_cmd.h: correct all kernel-doc prototype warnings

Correct all typedef, struct, and union prototype warnings in
dmub_cmd.h by using the matching names or "typedef" keyword:

Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:961 cannot understand function prototype: 'typedef uint32_t dmub_trace_code_t;'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1183 expecting prototype for union dmub_shared_state_ips_fw. Prototype was for union dmub_shared_state_ips_fw_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1203 expecting prototype for union dmub_shared_state_ips_signals. Prototype was for union dmub_shared_state_ips_driver_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1253 expecting prototype for struct dmub_shared_state_cursor_offload_v1. Prototype was for struct dmub_shared_state_cursor_offload_stream_v1 instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1269 struct dmub_shared
_state_feature_common { uint32_t padding[62]; };: error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1278 struct dmub_shared
_state_feature_header { uint16_t id;  uint16_t version;  uint32_t reserved;  };:
 error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2001 expecting prototype for struct dmub_cmd_read_modify_write_sequence. Prototype was for struct dmub_rb_cmd_read_modify_write instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2191 expecting prototype for struct dmub_rb_cmd_cab. Prototype was for struct dmub_rb_cmd_cab_for_ss instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2875 expecting prototype for struct dmub_cmd_set_pixel_clock_data. Prototype was for struct dmub_rb_cmd_set_pixel_clock instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3398 expecting prototype for union dpia_notify_data_type. Prototype was for union dpia_notification_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3447 expecting prototype for struct dmub_rb_cmd_hpd_sense_notify. Prototype was for struct dmub_rb_cmd_hpd_sense_notify_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:6267 expecting prototype for struct dmub_cmd_cable_id_input. Prototype was for struct dmub_cmd_cable_id_output instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dmub_cmd.h: correct typos and spellos

Fix spelling issues that are reported by codespell:

dmub_cmd.h:332: alighment ==> alignment
dmub_cmd.h:2029: sequeunce ==> sequence
dmub_cmd.h:3684: optimzations ==> optimizations
dmub_cmd.h:4491: isntance ==> instance
dmub_cmd.h:4514: optimzations ==> optimizations
dmub_cmd.h:4604: isntance ==> instance
dmub_cmd.h:4643: isntance ==> instance
dmub_cmd.h:4679: isntance ==> instance
dmub_cmd.h:4699: isntance ==> instance
dmub_cmd.h:4719: isntance ==> instance
dmub_cmd.h:4735: isntance ==> instance
dmub_cmd.h:4749: isntance ==> instance
dmub_cmd.h:4795: isntance ==> instance
dmub_cmd.h:4903: isntance ==> instance
dmub_cmd.h:4936: isntance ==> instance
dmub_cmd.h:5066: re-use ==> reuse
dmub_cmd.h:6552: isntance ==> instance
dmub_cmd.h:6630: isntance ==> instance
dmub_cmd.h:6639: optimzations ==> optimizations
dmub_cmd.h:6720: isntance ==> instance
dmub_cmd.h:6742: isntance ==> instance

and fix a few that I found:

dicated ==> dictated (7x)
afftet ==> after (is this correct?)

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use EDID from VBIOS embedded panel info

When an embedded panel has no DDC, read the EDID from
the VBIOS embedded panel info and use that.

Fixes: 7c7f5b15be65 ("drm/amd/display: Refactor edid read.")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Read EDID from VBIOS embedded panel info

Some board manufacturers hardcode the EDID for the embedded
panel in the VBIOS. This EDID should be used when the panel
doesn't have a DDC.

For reference, see the legacy non-DC display code:
amdgpu_atombios_encoder_get_lcd_info()

This is necessary to support embedded connectors without DDC.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow constructing DCE8 link encoder without DDC

When the DDC channel ID is set to CHANNEL_ID_UNKNOWN,
pass NULL to the AUX regs array.

This is necessary to support embedded connectors without DDC.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow constructing DCE6 link encoder without DDC

When the DDC channel ID is set to CHANNEL_ID_UNKNOWN,
pass NULL to the AUX regs array.

This is necessary to support embedded connectors without DDC.

Fixes: 7c15fd86aaec ("drm/amd/display: dc/dce: add initial DCE6 support (v10)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow DCE link encoder without AUX registers

Allow constructing the DCE link encoder without DDC,
which means the AUX registers array will be NULL.

This is necessary to support embedded connectors without DDC.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow embedded connectors without DDC

On some laptops, the embedded panel may not have
a DDC (display data channel) available. On these,
the EDID may be hardcoded in ACPI or the VBIOS.

In this case, use GPIO_DDC_LINE_UNKNOWN and don't fail.

Fixes: def3488eb0fd ("drm/amd/display: refactor HPD to increase flexibility")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUs

[Why]

Rapid vblank off is causing flip-done timeouts for NV3x and newer
family of GPUs that support more idle optimization features.

A proper fix requires further investigation. In lieu of it, let's
workaround it for now.

[How]

For NV3x and newer family of DGPUs, restore the old 5s vblank off timer.

Fixes: 9b47278cec98 ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3787
Link: https://lore.kernel.org/amd-gfx/20260217191632.1243826-1-sysdadmin@m1k.cloud/
Tested-by: Michele Palazzi <sysdadmin@m1k.cloud>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate include of dce/dmub_hw_lock_mgr.h

Remove duplicate inclusion of dce/dmub_hw_lock_mgr.h in dcn42_hwseq.c to
clean up redundant code.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn4: Avoid overflow on msg bound check

As pointed out by SDL, the previous condition may be vulnerable to
overflow.

Fixes: 0a78f2bac142 ("drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg")
Cc: SDL <sdl@nppct.ru>
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add fine grained flag to SMU v13.0.6

Gfx clock is fine grained on SMU v13.0.6/12 SOCs. Add the flag to report
clock frequencies correctly.

Fixes: 7380228401c4 ("drm/amd/pm: Use generic dpm table for SMUv13 SOCs")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean up the userq unmap error handler

amdgpu_userq_unmap_helper() already handles the unmap error case.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: 4aeaf3cbfa9f ("drm/amdgpu/jpeg: Add jpeg 5.3.0 support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Queue reset support in KFD topology

User mode compute queue/pipe reset was originally only supported in GC 9.
It is now also supported in GC 12.1. Report it in KFD topology.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Reset queue/pipe in MES

When removing queues fails, KFD calls amdgpu_mes to detect and reset
hung queues, then cleans up those hung queues in KFD.

Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add detect+reset hangs to GC 12.1

Add detect_and_reset_hung_queues to user mode compute queues on GC 12.1.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable suspend/resume gang in mes 12.1

This patch adds code to mes_v12_1_suspend_gang and mes_v12_1_resume_gang.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Missing multi-XCC support in MES

In a multi-XCC GPU, pass the master XCC's ID to amdgpu_mes_suspend,
amdgpu_mes_resume, and detect_and_reset_hung_queues so the command will be
sent to the matching master MES when the compute partition mode is not
SPX.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move VM PTE MTYPE override to per-PTE granularity

Refactor the NUMA-aware MTYPE override for VM page table entries:

Move the override_vm_pte_flags call from the centralized
amdgpu_vm_pte_update_flags() into the individual CPU and SDMA update
backends, enabling per-PTE MTYPE override including for scattered
pages (pages_addr path).

Move APU, IP version, and direct-mapped eligibility checks from
runtime (gmc_v9_0_override_vm_pte_flags) to init time
(gmc_v9_0_set_gmc_funcs), to avoid repeated runtime checks on
every PTE update.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3: Avoid overflow on msg bound check

As pointed out by SDL, the previous condition may be vulnerable to
overflow.

Fixes: b193019860d6 ("drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg")
Cc: SDL <sdl@nppct.ru>
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.2 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: 855e3e19f69c ("drm/amdgpu: Add JPEG_v5_0_2 IP block")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.1 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: b8f57b69942b ("drm/amdgpu: Add JPEG5_0_1 support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.0 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: dfad65c65728 ("drm/amdgpu: Add JPEG5 support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: 8f98a715da8e ("drm/amdgpu/jpeg: add jpeg support for VCN4_0_5")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: e684e654eba9 ("drm/amdgpu/jpeg: add jpeg support for VCN4_0_3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: b13111de32a9 ("drm/amdgpu/jpeg: add jpeg support for VCN4_0_0")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: dfd57dbf44dd ("drm/amdgpu: add JPEG3.0 support for Sienna_Cichlid")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: 14f43e8f88c5 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring

JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.

Fixes: 6ac27241106b ("drm/amdgpu: add JPEG v2.0 function supports")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v5.0.2 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 8433398c789c ("drm/amdgpu: Add VCN v5_0_2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 346492f30ce3 ("drm/amdgpu: Add VCN_5_0_1 support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: b6d1a0632051 ("drm/amdgpu: add VCN_5_0_0 IP block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v4.0.5 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 547aad32edac ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v4.0.3 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: b889ef4ac988 ("drm/amdgpu/vcn: add vcn support for VCN4_0_3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 8da1170a16e4 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: cf14826cdfb5 ("drm/amdgpu: add VCN3.0 support for Sienna_Cichlid")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec rings

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 28c17d72072b ("drm/amdgpu: add VCN2.5 basic supports")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: properly handle family setting for early GC 11.5.4

Early variants need an override.

Fixes: 57d00816c6a9 ("drm/amdgpu: set family for GC 11.5.4")
Cc: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings

VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.

Fixes: 1b61de45dfaf ("drm/amdgpu: add initial VCN2.0 support (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move amdgpu_device_check_iommu_direct_map() earlier

So device init ram_is_direct_mapped is available when gmc_funcs are selected
during IP early init.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update emit clock logic

If only one level is enabled in clock table, there is no need to
follow the fine grained clock logic which expects a minimum of
two levels (min/max).

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DC to 3.2.380

This version brings along following update:
-Fix root clock disabled when DSC power gate disabled for DCN314
-Enable/Disable some power gating
-Remove Mall, SubVP and MCLK from DCN42
-Unify fast update classification paths
-Fix narrowing boundaries in dml
-Update MCIF_ADDR macro to address IGT DWB regression
-Fix dual cursor shows on extend desktop
-Fix hubp tmz field define mismatch

Acked-by: Alex Hung <Alex.Hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.1.57.0

[Why & How]
Modify some IPS related commands.

Acked-by: Alex Hung <Alex.Hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix root clock disabled when DSC power gate disabled for DCN314

[Why]
When set debug.disable_dsc_power_gate = true, the original code
uses an early return to skip the power gate sequence and root
clock enable and disable.

For this case, install new driver without uninstall old driver.
The sequence like below:
1. On the power-off path, the old driver will power gate dsc and
   disable_dsc() (root clock disable) due to
   debug.disable_dsc_power_gate = false.
2. On the power-on path, the new driver will force power on dsc but skip
   enable_dsc() (root clock enable) due to
   debug.disable_dsc_power_gate = true.

Finally, when mode needs DSC but the root clock is disabled, underflow
happened.

[How]
- Moving enable_dsc() before the disable_dsc_power_gate check so the
  root clock is always enabled on the power-on path.
- Replacing the early return with a goto that skips only the power gate
  register writes, allowing disable_dsc() to still execute on the
  power-off path.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable hpo power gate

[Why & How]
Disable HPO power gate temporarily to
work around some DP 2 LL compliance failures on DCN42.

Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove Mall, SubVP and MCLK from DCN42

[Why&How]
Remove MALL, SubVP and MCLK features from DCN42 resource file since it is
an APU and does not support them.

Assisted-by: Claude:opus-4.6
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Unify fast update classification paths

[Why]
The dc_fast_update intermediate struct created code duplication and
complexity with multiple classification paths (populate_fast_updates,
fast_nonaddr_updates_exist, full_update_required). This refactoring
simplifies the update classification system by consolidating to a
single path while maintaining compatibility and adding comprehensive
test coverage for fast sequence functionality.

[How]
Remove entire dc_fast_update struct and associated helper functions:
- populate_fast_updates
- fast_nonaddr_updates_exist
- full_update_required
and
- Refactor check_update_surfaces_for_stream as the
  single classification path with explicit handling for func_shaper,
  lut3d_func, cursor_csc_color_matrix_change and
  scaler_sharpener_update.
- Add reserved bitfields to surface_update_flags and
  stream_update_flags unions for completeness guards.
- Extract dc_check_address_only_update and
  dc_check_update_surfaces_for_stream as public.
- Add comprehensive test coverage with parameterized tests for all
  FAST flags, update classification tests for MED/FULL paths,
  and completeness guard tests.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix narrowing boundaries in dml

[Why]
DML code paths include implicit integer narrowing at protocol and
storage boundaries. Making these boundaries explicit improves clarity
and reduces warning noise while preserving behavior.

[How]
Apply explicit C-style casts at intentional narrowing boundaries
across DML calculation, mode support, RQ/DLG, wrapper, and DSC
helper paths.
Keep intermediate arithmetic in natural-width types where practical,
with minor type-consistency cleanups where needed. Add explicit
boundary casts for intentional narrowing and keep intermediate math
in wider types where practical, with small type-consistency cleanups
to maintain behavior and readability.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Validate CRIU-restored IDs before idr_alloc

The KFD CRIU restore flow restores previously saved object IDs from
userspace.

For event restore:

  kfd_criu_restore_event()
      -> create_signal_event() / create_other_event()
          -> allocate_event_notification_slot()
              -> idr_alloc(..., *restore_id, *restore_id + 1, ...)

For BO restore:

  criu_restore_memory_of_gpu()
      -> idr_alloc(..., bo_priv->idr_handle, ...)

In both cases, the restored ID comes from userspace-provided CRIU data.

idr_alloc() expects the ID range values to fit within signed int
limits. If a restored ID is larger than INT_MAX, it can trigger a WARN
in the IDR layer.

A kernel WARN is undesirable because it prints a warning trace and may
cause a panic or reboot on systems with panic_on_warn enabled.

Smatch reported these paths as allowing unchecked userspace values to
reach idr_alloc().

Add INT_MAX validation before using restored IDs in:

- kfd_criu_restore_event()
- criu_restore_memory_of_gpu()

If the restored ID is invalid, return -EINVAL.

This prevents invalid restore data from reaching the IDR layer and
avoids WARN-triggering paths, while keeping valid restore behavior
unchanged.

Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: David Yat Sin <david.yatsin@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework userq fence signal processing

Move more code into a common userq function.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move read_indexed_register to amdgpu_reg_access

The read_indexed_register helper is duplicated across multiple files
with identical logic.

Move it to amdgpu_reg_access.c as
amdgpu_read_indexed_register and update all users accordingly.

No functional changes intended.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move program_aspm to amdgpu_nbio

The program_aspm helper is duplicated across multiple files with
identical logic.

Move it to amdgpu_nbio.c as amdgpu_nbio_program_aspm and update
all users accordingly.

Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable HUBP/OPTC/DPP power gating

[Why & How]
Enable driver power gating on DCN42 for HUBP OPTC
and DPP HW blocks.

Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix implicit conversion warning

[Why & How]
Fix implicit narrowing conversion warnings.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update MCIF_ADDR macro to address IGT DWB regression

[Why]
A previous warning-fix commit updated type casts in the DCN3
mmhubbub code but missed updating the MCIF_ADDR macro to the
correct, fully parenthesized and casted version. This caused
a regression during DWB tests, where address values could be
misinterpreted, potentially leading to incorrect hardware
programming.

[How]
Updated the MCIF_ADDR macro in dcn30_mmhubbub.c to use the
proper parenthesization and type casting, ensuring correct
address handling. Removed redundant casts from REG_UPDATE
calls for improved clarity and consistency with current
coding standards.

Fixes: f4cdbb5d5405 ("drm/amd/display: Fix implicit narrowing conversion warnings")
Reviewed-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dual cursor shows on extend desktop

[why & how]
when dpp pipe power gating disabled in driver, disable_pipe
did not disable cursor so next time as long as this pipe
powers up, it will be visible.

port dcn314 logic: disable cursor when it should be pipe pg.

Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix hubp tmz field define mismatch

[why & how]
to make hubp surface_flip_registers field define mismatch
with dc_plane_address

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable driver power gating

[Why & How]
Enable driver power gating. Temporarily disable DIO power gating.

Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix build for CONFIG_DRM_FBDEV_EMULATION=n

The merge-commit 02e778f12359 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of
https://gitlab.freedesktop.org/agd5f/linux into drm-next") removes the stub
for drm_fb_helper_gem_is_fb(), so the buld gets broken if DRM_FBDEV_EMULATION
is not set.

‘drm_fb_helper_gem_is_fb’; did you mean ‘drm_fb_helper_from_client’? [-Wimplicit-function-declaration]
 1777 |                 if (!drm_fb_helper_gem_is_fb(dev->fb_helper, fb->obj[0])) {
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      drm_fb_helper_from_client

Restore it.

Fixes: 02e778f12359 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add node_id-to-die-name decoding for ih v7_1

Converts node_id values into human-readable die
names to facilitate debugging

v2: squash in fix (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the ASP command for partition switch

Pass the compute partition mode to ASP.

v2: Squash fixes (Alex)

Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: check if vm ready in svm map and unmap to gpu

Don't map or unmap svm range to gpu if vm is not ready for updates.

Why: DRM entity may already be killed when the svm worker try to
update gpu vm.

Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: validate SVM ioctl nattr against buffer size

Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.

Reviewed-by: Amir Shetaia <Amir.Shetaia@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Init mcm_addr look up table"

This reverts commit e7820045fde15d25b5b2706f03499e0cb9ae778e.
As vBIOS add the support for partition switch programming.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Limit per-process xnack support for GFX12.1

GFX12.1 doesn't support different processes with different xnack
setting. Hence, xnack changes from its default setting needs driver
reload with noretry module parameter.

However, if driver boots-up with xnack on and process sets xnack off,
this condition is supported. In this case, only driver takes xnack off
path whereas hardware / firmware considers xnack is on.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip.Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set default xnack mode for gfx_v12.1 A0/B0

For A0, default xnack mode is off
For BO, default xnack mode is on

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip.Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set chicken bit for gfx_v12.1 xnack

For xnack on, set TCP_PERFCOUNTER_FILTER.COMPRESSION_ENABLE to 1
For xnack off, set TCP_PERFCOUNTER_FILTER.COMPRESSION_ENABLE to 0

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip.Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Switch to gfx_v12_1_get_xccs_per_xcp

Use gfx v12_1 callback to query the numbers of xccs
per xcp

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: In GFX12.1 CU is same as WGP

Fix this for current ip discovery table.

v2: Move the change to gfx12 file
v3: Change only for the current version of ip discovery table
v4: Squash in build fixes

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update cp cmd pkt for gfx v12_1

Update CP command package for gfx v12.1.

v2: squash in update (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support nbio v6_3_2

Support NBIO version 6.3.2 related function.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add doorbell range function for nbio v6_3_2

Add doorbell range and ih control related function for
NBIO version 6.3.2.

v2: squash in doorbell range fixes
v3: squash in xcd doorbell fix

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add nbio v6_3_2 support

v6_3_2 is a new nbio generation ip

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add nbio v6_3_2 ip headers v4

Add header files for nbio v6_3_2 register offsets
and shift masks
v2: Update nbio v6_3_2 ip headers up to CL7337280
v3: Update nbio v6_3_2 ip headers up to CL7749557
v4: Clean up registers (Alex)
v5: squash in updates (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid reset in AMDGPU unload path for APUs with GFX V11 and higher.

GFX V11 has GC block as default off IP.
Every time AMDGPU driver sends a request to PMFW
to unload MP1, PMFW will put GC in reset and
power down the voltage.Hence, skipping reset
for APUs with GFX V11 or later to avoid reset
related failures.

Fixes: 34355e61835e ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only send RMA CPER when threshold is exceeded

According to our documentation, the RMA should only occur when the
threshold has been exceeded, not met.

Fixes: 5028a24aa89a ("drm/amdgpu: Send applicable RMA CPERs at end of RAS init")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unsigned underflow in SubVP vblank schedulability check v2

subvp_vblank_schedulable() checks whether the SubVP active region can
fit the prefetch time, vblank frame time, and the larger of the vblank
blanking time and MALL region.

Commit 11236ac905e7 ("drm/amd/display: Fix dml2_0 narrowing boundaries")
changed the intermediate timing variables from u16 to u32. After that
change, the schedulability test:

subvp_active_us - prefetch_us - vblank_frame_us -
max_vblank_mallregion > 0

is evaluated in unsigned arithmetic. If the required time exceeds the
available active time, the subtraction can underflow and wrap, producing
a large positive value instead of a negative result.

Fix this by comparing the available time against the required time
directly, using u64 for the accumulated required duration.

v2:
- Use uint64_t instead of u64 for consistency with DC style (Dillon)
- Make all terms explicitly uint64_t in the accumulated sum & use
  single-definition form for required_us (Gaghik)

Fixes: 11236ac905e7 ("drm/amd/display: Fix dml2_0 narrowing boundaries")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dillon Varone <dillon.varone@amd.com>
Cc: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix divide by zero in calc_psr_num_static_frames

calc_psr_num_static_frames() divides by vsync_rate_hz before checking
whether it is zero:

frame_time_microsec = 1000000 / vsync_rate_hz;

This can trigger a divide-by-zero bug if an invalid refresh rate is
passed in.

Rewrite the calculation to directly compute the number of frames needed
for at least 30 ms using DIV_ROUND_UP(). This avoids the invalid divisor
and removes the temporary frame_time_microsec calculation.

Keep the existing fallback behavior of 2 static frames when
vsync_rate_hz is zero.

Fixes: 4cef2ac4c795 ("drm/amd/display: Introduce power module on Linux")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Ray Wu <ray.wu@amd.com>
Cc: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix root reservation in amdgpu_vm_handle_fault

svm_range_restore_pages might reserve the root bo so it must
be called after unreserving it.

Fixes: 1b135c6da061 ("drm/amdgpu: extract amdgpu_vm_lock_by_pasid from amdgpu_vm_handle_fault")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx6: Support harvested SI chips with disabled TCCs (v2)

This commit fixes amdgpu to work on the Radeon HD 7870 XT
which has never worked with the Linux open source drivers before.

Some boards have "harvested" chips, meaning that some parts of
the chip are disabled and fused, and it's sold for cheaper and
under a different marketing name.
On a harvested chip, any of the following can be disabled:
- CUs (Compute Units)
- RBs (Render Backend, aka. ROP)
- Memory channels (ie. the chip has a lower bandwidth)
- TCCs (ie. less L2 cache)

Handle chips with harvested TCCs by patching the registers
that configure how TCCs are mapped.

If some TCCs are disabled, we need to make sure that
the disabled TCCs are not used, and the remaining TCCs
are used optimally.

TCP_CHAN_STEER_LO/HI control which TCC is used by TCP channels.
TCP_ADDR_CONFIG.NUM_TCC_BANKS controls how many channels are used.

Note that the TCC configuration is highly relevant to performance.
Suboptimal configuration (eg. CHAN_STEER=0) can significantly
reduce gaming performance.

For optimal performance:
- Rely on the CHAN_STEER from the golden registers table,
  only skip disabled TCCs but keep the mapping order.
- Limit NUM_TCC_BANKS to number of active TCCs to avoid thrashing,
  which performs better than using the same TCC twice.

v2:
- Also consider CGTS_USER_TCC_DISABLE for disabled TCCs.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=60879
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/2664
Fixes: 2cd46ad22383 ("drm/amdgpu: add graphic pipeline implementation for si v8")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add TCC, update TCP in amdgpu glossary

These are the L2 and L1 cache on some AMD GPU architectures.
Add them to the glossary, keeping existing alphabetical order.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/uvd3.1: Don't validate the firmware when already validated

UVD 3.1 firmware validation seems to always fail after
attempting it when it had already been validated.
(This works similarly with the VCE 1.0 as well.)

Don't attempt repeating the validation when it's already done.

This caused issues in situations when the system isn't able
to suspend the GPU properly and so the GPU isn't actually
powered down. Then amdgpu would fail when calling the IP
block resume function.

Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/2887
Fixes: bb7978111dd3 ("drm/amdgpu: fix SI UVD firmware validate resume fail")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG

There were multiple issues in that code.

First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.

Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.

Then we used down_read_trylock() instead of waiting for the reset to
finish.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 9e823f307074 ("drm/amdgpu: Block MMR_READ IOCTL in reset")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix missing fine-grained dpm table flag on aldebaran

Add the missing SMU_DPM_TABLE_FINE_GRAINED flag to aldebaran DPM table.
This fixes the pp_dpm_sclk node issue caused by missing flag configuration.

Fixes: 7ea1c722fe1d ("drm/amd/pm: Use common helper for aldebaran dpm table")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: remove trailing semicolon from AMDGPU_PM_POLICY_ATTR macro

macros should not include a trailing semicolon as per kernel coding
style (checkpatch.pl warning).

move the semicolon from the macro definition to the invocation sites instead.

checkpatch.pl logs:
WARNING: macros should not use a trailing semicolon
+#define AMDGPU_PM_POLICY_ATTR(_name, _id)                                  \
+       static struct amdgpu_pm_policy_attr pm_policy_attr_##_name = {     \
+               .dev_attr = __ATTR(_name, 0644, amdgpu_get_pm_policy_attr, \
+                                  amdgpu_set_pm_policy_attr),             \
+               .id = PP_PM_POLICY_##_id,                                  \
+       };

Fixes: 4d154b1ca580 ("drm/amd/pm: Add support for DPM policies")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc: Fix AMDGPU_GART_PLACEMENT_LOW to not overlap with VRAM

When the GART placement is set to AMDGPU_GART_PLACEMENT_LOW:
Make sure that GART does not overlap with VRAM when
VRAM is configured to be in the low address space.

Solve this according to the following logic:
- When GART fits before VRAM, use zero address for GART
- Otherwise, put GART after the end of VRAM, aligned to 4 GiB

Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.

Fixes: 917f91d8d8e8 ("drm/amdgpu/gmc: add a way to force a particular placement for GART")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: Only ignore -ENOENT for KFD init failuires

When compiled without CONFIG_HSA_AMD KFD will return -ENOENT.
As other errors will cause KFD functionality issues this is the
only error code that should be ignored at init.

Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid double drm_exec_fini() in userq validate

When new_addition is true, amdgpu_userq_vm_validate() calls
drm_exec_fini(&exec) before iterating over the collected HMM ranges and
calling amdgpu_ttm_tt_get_user_pages().

If amdgpu_ttm_tt_get_user_pages() fails in that path, the code jumps to
unlock_all and calls drm_exec_fini(&exec) a second time on the same
exec object. drm_exec_fini() is not idempotent: it frees exec->objects
and may also drop exec->contended and finalize the ww acquire context.

Route that error path directly to the range cleanup once exec has
already been finalized.

Fixes: 42f148788469 ("drm/amdgpu/userqueue: validate userptrs for userqueues")
Issue found using a prototype static analysis tool
and confirmed by code review.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Signed-off-by: Slavin Liu <220245772@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Restore analog connector support

[Why]
The analog connector support was accidentally removed,
causing a crash when connecting an analog monitor.

[How]
This patch restores the functions and pointers required for proper analog
and DP bridge encoder support on legacy GPUs.

V2: Restore the external encoder control functions.

V3:
 - Restore BIOS parser external encoder DAC load detection
 - Restore stream initialization and source selection changes

Fixes: e56e3cff2a1b ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix zero-size GDS range init on RDNA4

RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.

amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.

Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.

DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config.  This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.

Link: https://lore.kernel.org/all/bug-221376-2300@https.bugzilla.kernel.org%2F/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221376
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
Assisted-by: GitHub Copilot:Claude Sonnet 4.6 linux-kernel-oops-x86.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Replace VKMS vblank timer with common implementation

Replace amdgpu's custom vblank timers with the shared implementation
in DRM's vblank code. Both are built upon hrtimers. The vblank logic
is identical.

The shared helpers contain all initialization internally. They also
handle a number of deadlocks and race conditions that are present in
amdgpu.

Also remove the set-but-unused field vsync_timer_enabled from struct
amdgpu_crtc.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add upper bound check for num_of_nodes

drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.

Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable 10-bit truncation and dithering on DCE 6.x

DCE 6.x doesn't support 10-bit truncation and 10-bit dithering
because the following fields are 1-bit only:
FMT_TEMPORAL_DITHER_DEPTH
FMT_SPATIAL_DITHER_DEPTH
FMT_TRUNCATE_DEPTH
Programming these fields to "2" will program them as if the
dithering option was 6-bit, resulting in sub-par picture
quality and an ugly "color banding" effect.

Note that a recent commit changed the default 10-bit dithering
option to DITHER_OPTION_SPATIAL10 which improves the picture
quality because it happens to look better, but is still not
actually supported by DCE 6.x versions.

When the color depth is 10-bit or more, just disable
any kind of dithering options on DCE 6.x.

Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5151
Fixes: 529cad0f945c ("drm/amd/display: Add function to set dither option")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: OR init_pte_flags into invalid leaf PTE updates

Invalid leaf clears that only set AMDGPU_PTE_EXECUTABLE match the old
GMC9 fault-priority workaround but omit adev->gmc.init_pte_flags.
On GFX12 that includes AMDGPU_PTE_IS_PTE; without it, some cleared
PTEs can fault as no-retry and bypass the SVM/XNACK handler when a
VA is reused after a BO unmap.

Apply init_pte_flags in amdgpu_vm_pte_update_flags() alongside
EXECUTABLE so range-driven clears (e.g. amdgpu_vm_clear_freed) match
amdgpu_vm_pt_clear() for leaf templates.

Signed-off-by: Siwei He <siwei.he@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Adjust ASPM support quirk to cover more Intel hosts

Some of the same issues identified in commit c770ef19673fb
("drm/amd/amdgpu: disable ASPM in some situations") also affect
Tiger Lake systems with GFX11 connected over USB4. Widen the net
to also match these hosts.

Fixes: d9b3a066dfcd ("drm/amd: Exclude dGPUs in eGPU enclosures from DPM quirks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5145
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12.1: align mqd settings with KFD

Make sure to set the quantum bits in the compute MQD
for better fairness across queues of the same priority.

Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9.4.3: align mqd settings with KFD

Make sure to set the quantum bits in the compute MQD
for better fairness across queues of the same priority.

Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12: align mqd settings with KFD

Make sure to set the quantum bits in the compute MQD
for better fairness across queues of the same priority.

Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>