Arnd Bergmann [Fri, 23 Sep 2022 13:43:43 +0000 (15:43 +0200)]
Merge tag 'tegra-for-6.1-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.1-rc1
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
* tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add GPCDMA support for Tegra I2C
arm64: tegra: Add iommus for HDA on Tegra234
arm64: tegra: Enable HDA node for Jetson AGX Orin
arm64: tegra: Add context isolation domains on Tegra234
arm64: tegra: Fixup iommu-map property formatting
arm64: dts: tegra: smaug: Add Wi-Fi node
arm64: dts: tegra: smaug: Add Bluetooth node
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
arm64: tegra: Add MGBE nodes on Tegra234
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
arm64: tegra: Enable PCIe slots in P3737-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
arm64: tegra: Add regulators required for PCIe
Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 13:42:42 +0000 (15:42 +0200)]
Merge tag 'tegra-for-6.1-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 17 Sep 2022 18:02:30 +0000 (20:02 +0200)]
Merge tag 'at91-dt-6.1-2' of https://git./linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sergiu Moga [Tue, 13 Sep 2022 14:21:56 +0000 (17:21 +0300)]
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
The DT nodes of the SPI IP's may contain DMA related properties so
make sure that the binding is able to properly validate those as
well by making it aware of these optional properties.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-5-sergiu.moga@microchip.com
Sergiu Moga [Tue, 13 Sep 2022 14:21:55 +0000 (17:21 +0300)]
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
Add the missing required DT property `atmel,usart-mode` to the serial
nodes of Atmel/Microchip DT files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com
Sergiu Moga [Tue, 13 Sep 2022 14:21:54 +0000 (17:21 +0300)]
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-3-sergiu.moga@microchip.com
Sergiu Moga [Tue, 13 Sep 2022 14:21:53 +0000 (17:21 +0300)]
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
Swap the rx and tx of the DMA related DT properties of the spi11 node
in order to maintain consistency across Microchip/Atmel SoC files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-2-sergiu.moga@microchip.com
Arnd Bergmann [Thu, 15 Sep 2022 20:03:43 +0000 (22:03 +0200)]
Merge tag 'arm-soc/for-6.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoC changes for 6.1,
please pull the following:
- Rafal adds the BCM4908 LED controller node and describes all 32 LED
pins, he also adds support for the Asus GC-AC5300 LEDs
* tag 'arm-soc/for-6.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs
arm64: dts: broadcom: bcm4908: add LEDs controller block
arm64: dts: broadcom: bcm4908: add remaining LED pins
Link: https://lore.kernel.org/r/20220915023044.2350782-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 15 Sep 2022 20:00:12 +0000 (22:00 +0200)]
Merge tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoC Device Tree updates
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
* tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
arm64: dts: Add BCM4908 generic board dts
arm64: dts: Move BCM4908 dts to bcmbca folder
arm64: dts: bcmbca: update BCM4908 board dts files
dt-bindings: arm64: bcmbca: Update BCM4908 description
dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
ARM: dts: BCM5301X: Add basic PCI controller properties
Link: https://lore.kernel.org/r/20220915023044.2350782-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Akhil R [Tue, 6 Sep 2022 14:47:15 +0000 (20:17 +0530)]
arm64: tegra: Add GPCDMA support for Tegra I2C
Add dma properties to support GPCDMA for I2C in Tegra 186 and later
chips
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mohan Kumar [Tue, 30 Aug 2022 05:27:36 +0000 (10:57 +0530)]
arm64: tegra: Add iommus for HDA on Tegra234
Add the iommus property to the HDA node on Tegra234.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mohan Kumar [Thu, 1 Sep 2022 04:33:05 +0000 (10:03 +0530)]
arm64: tegra: Enable HDA node for Jetson AGX Orin
Enable HDA node for the Jetson AGX Orin platform.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mikko Perttunen [Wed, 7 Sep 2022 08:38:44 +0000 (11:38 +0300)]
arm64: tegra: Add context isolation domains on Tegra234
Add Host1x context isolation domains on Tegra234. On Tegra234 we have
two IOMMUs that are connected to Host1x-channel programmed engines,
so we have to include domains for each of them.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 2 Sep 2022 15:05:29 +0000 (17:05 +0200)]
arm64: tegra: Fixup iommu-map property formatting
Make sure that each phandle-array is enclosed in a set of angular
brackets and properly indent each entry.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diogo Ivo [Wed, 14 Sep 2022 11:12:21 +0000 (12:12 +0100)]
arm64: dts: tegra: smaug: Add Wi-Fi node
The Google Pixel C contains a BRCM4354 Wi-Fi + BT module.
Add a DT node for its Wi-Fi functionality. Tested on Pixel C.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diogo Ivo [Wed, 14 Sep 2022 11:12:20 +0000 (12:12 +0100)]
arm64: dts: tegra: smaug: Add Bluetooth node
The Google Pixel C contains a BRCM4354 Wi-Fi + BT module.
Add a DT node for its BT functionality. Tested on Pixel C.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 7 Jul 2022 07:48:16 +0000 (09:48 +0200)]
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
A Multi-Gigabit Ethernet (MGBE) instance drives the primary Ethernet
port on the Jetson AGX Orin Developer Kit. Enable it.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 7 Jul 2022 07:48:15 +0000 (09:48 +0200)]
arm64: tegra: Add MGBE nodes on Tegra234
Add device tree nodes for the four instances of the Multi-Gigabit
Ethernet (MGBE) IP found on NVIDIA Tegra234 SoCs.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 7 Sep 2022 16:19:43 +0000 (18:19 +0200)]
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
There is no need to list the Tegra194-specific compatible for Tegra234
because the backwards-compatibility goes back all the way to Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vidya Sagar [Thu, 21 Jul 2022 14:20:42 +0000 (19:50 +0530)]
arm64: tegra: Enable PCIe slots in P3737-0000 board
Enable PCIe controller nodes to enable respective PCIe slots on
P3737-0000 board. Following is the ownership of slots by different
PCIe controllers.
Controller-1 : On-board Broadcom WiFi controller
Controller-4 : M.2 Key-M slot
Controller-5 : CEM form-factor x8 slot
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vidya Sagar [Thu, 21 Jul 2022 14:20:41 +0000 (19:50 +0530)]
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
Add P2U (PIPE to UPHY) and PCIe controller nodes to device tree.
The Tegra234 SoC contains 10 PCIe controllers and 24 P2U instances
grouped into three different PHY bricks namely High-Speed IO (HSIO-8 P2Us)
NVIDIA High Speed (NVHS-8 P2Us) and Gigabit Ethernet (GBE-8 P2Us)
respectively.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vidya Sagar [Thu, 21 Jul 2022 14:20:40 +0000 (19:50 +0530)]
arm64: tegra: Add regulators required for PCIe
Add regulator supplies required for PCIe functionality. The supplies
include 1.8V, 3.3V and 12V.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 15 Sep 2022 19:30:18 +0000 (21:30 +0200)]
Merge branch 'for-6.1/dt-bindings' into for-6.1/arm64/dt
Mikko Perttunen [Wed, 7 Sep 2022 08:38:43 +0000 (11:38 +0300)]
dt-bindings: Add Host1x context stream IDs on Tegra234
Add defines for stream IDs used for Host1x context isolation
on Tegra234. The same stream IDs are used for both NISO0 and
NISO1 SMMUs since Host1x's stream ID protection tables don't
make a distinction between the two.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jerry Ray [Fri, 9 Sep 2022 16:30:22 +0000 (11:30 -0500)]
dts: arm: at91: Add SAMA5D3-EDS Board
The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
evaluating many Microchip ethernet switch and PHY products. Various
daughter cards can connect via an RGMII connector or an RMII connector.
The EDS board is not intended for stand-alone use and has no ethernet
capabilities when no daughter board is connected. As such, this device
tree is intended to be used with a DT overlay defining the add-on board.
To better ensure consistency, some items are defined here as a form of
documentation so that all add-on overlays will use the same terms.
Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
[claudiu.beznea: s/gpio-inputs/gpio-keys in at91-sama5d3_eds.dts]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-2-jerry.ray@microchip.com
Jerry Ray [Fri, 9 Sep 2022 16:30:21 +0000 (11:30 -0500)]
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
Adding the SAMA5D3-EDS board from Microchip into the atmel AT91 board
description yaml file.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-1-jerry.ray@microchip.com
Horatiu Vultur [Thu, 8 Sep 2022 07:04:51 +0000 (09:04 +0200)]
ARM: dts: lan966x: disable aes
Disable AES node on lan966x pcb8290, pcb891 and pcb8309 because these
boards have lan966x that uses secure OS which reserves the AES block.
Therefore it can't be exposed to non-secure world.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220908070451.3730608-1-horatiu.vultur@microchip.com
Arnd Bergmann [Mon, 12 Sep 2022 15:19:56 +0000 (17:19 +0200)]
Merge tag 'samsung-dt64-6.1' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v6.0
1. Add binding headers for several Exynos850 and ExynosAutov9 clocks.
2. ExynosAutov9: Add FSYS clock controller nodes.
3. ExynosAutov9: Document serial compatible (used in DTS).
4. Exynos850: Add Audio, IS, MFC clock controllers. Add IOMMU nodes.
* tag 'samsung-dt64-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: serial: samsung: add exynosautov9-uart compatible
arm64: dts: exynos: Add SysMMU nodes for Exynos850
arm64: dts: exynos: Add CMU_AUD, CMU_IS and CMU_MFCMSCL for Exynos850
arm64: dts: exynosautov9: add fsys0/1 clock DT nodes
dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL
dt-bindings: clock: exynos850: Add Exynos850 CMU_IS
dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD
dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1
dt-bindings: clock: exynosautov9: add fsys1 clock definitions
dt-bindings: clock: exynosautov9: add fys0 clock definitions
dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1
Link: https://lore.kernel.org/r/20220909150849.820523-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 12 Sep 2022 14:35:47 +0000 (16:35 +0200)]
Merge tag 'stm32-dt-for-v6.1-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v6.1, round 1
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
* tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: argon: remove spidev node
ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
ARM: dts: stm32: Fix typo in license text for Engicam boards
ARM: dts: stm32: Add timer interrupts on stm32mp15
ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
Link: https://lore.kernel.org/r/d80afc20-2745-24a2-ab70-a5a03439bd50@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 12 Sep 2022 14:13:36 +0000 (16:13 +0200)]
Merge tag 'v6.1-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
Adapt emac nodes to make them conform to the newly yaml-converted binding.
* tag 'v6.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: restyle emac nodes
ARM: dts: rockchip: fix rk3036 emac node compatible string
Link: https://lore.kernel.org/r/4766760.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 12 Sep 2022 14:10:12 +0000 (16:10 +0200)]
Merge tag 'v6.1-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards the Anberic RG353P and RG503, Radxa Rock4c+ (variant with
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
* tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
arm64: dts: rockchip: Add Hantro encoder node to rk356x
arm64: dts: rockchip: Add VPU support for RK3568/RK3566
arm64: dts: rockchip: Enable PCIe controller on rock3a
arm64: dts: rockchip: add rtc to rock3a
arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b
arm64: dts: rockchip: add Anbernic RG353P and RG503
dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503
dt-bindings: vendor-prefixes: add Anbernic
arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
arm64: dts: rockchip: add LEDs for ROCK 4C+
arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+
arm64: dts: rockchip: add rk817 chg to Odroid Go Advance
arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro
arm64: dts: rockchip: rk3399: Radxa ROCK 4C+
arm64: dts: rockchip: Add RK3399-T OPP table
dt-bindings: arm: rockchip: Document Radxa ROCK 4C+
arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro
dt-bindings: arm: rockchip: Add PinePhone Pro bindings
arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610
...
Link: https://lore.kernel.org/r/5600929.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Wolfram Sang [Wed, 24 Aug 2022 08:21:28 +0000 (10:21 +0200)]
ARM: dts: stm32: argon: remove spidev node
Commit
956b200a846e ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.
Fixes:
16e3e44c5b87 ("ARM: dts: stm32: Add support for the emtrion emSBC-Argon")
Cc: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Patrice Chotard [Tue, 23 Aug 2022 07:58:49 +0000 (09:58 +0200)]
ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Jagan Teki [Tue, 23 Aug 2022 12:55:17 +0000 (18:25 +0530)]
ARM: dts: stm32: Fix typo in license text for Engicam boards
Fix the Amarula Solutions typo mistake in license text added in below
commits.
commit <
3ff0810ffc479> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0 10.1" OF")
commit <
6ca2898df59f7> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")
commit <
adc0496104b64> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")
commit <
30f9a9da4ee13> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
SoM")
commit <
1d278204cbaa1> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")
commit <
f838dae7afd00> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")
commit <
0be81dfaeaf89> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
SoM")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Uwe Kleine-König [Thu, 19 May 2022 16:28:38 +0000 (18:28 +0200)]
ARM: dts: stm32: Add timer interrupts on stm32mp15
The timer units in the stm32mp15x CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Add the irqs
to the timer units on stm32mp15x.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alain Volmat [Mon, 25 Jul 2022 07:52:55 +0000 (09:52 +0200)]
ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
Add pinctrl information and a disabled spi5 node within
stm32mp135f-dk.dts in order to use the spi5 bus which is
available via the GPIO expansion pins of the STM32MP135 Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alain Volmat [Mon, 25 Jul 2022 07:52:54 +0000 (09:52 +0200)]
ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
Add the 5 instances of spi busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alain Volmat [Thu, 21 Jul 2022 15:29:33 +0000 (17:29 +0200)]
ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alain Volmat [Thu, 21 Jul 2022 15:29:32 +0000 (17:29 +0200)]
ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
Add the 5 instances of i2c busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Judy Hsiao [Fri, 8 Jul 2022 08:07:26 +0000 (08:07 +0000)]
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Nicolas Frattaroli [Sun, 12 Jun 2022 15:53:46 +0000 (17:53 +0200)]
arm64: dts: rockchip: Add Hantro encoder node to rk356x
The RK3566 and RK3568 come with a dedicated Hantro instance solely for
encoding. This patch adds a node for this to the device tree, along with
a node for its MMU.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Piotr Oniszczuk [Mon, 14 Feb 2022 21:29:54 +0000 (22:29 +0100)]
arm64: dts: rockchip: Add VPU support for RK3568/RK3566
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8
video formats.
This patch enables RK356x video decoder in RK356x device-tree
include.
Tested on [1] with FFmpeg v4l2_request code taken from [2]
with MPEG2, H.642 and VP8 samples with results [3].
[1] https://github.com/warpme/minimyth2
[2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch
[3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt
Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Link: https://lore.kernel.org/r/20220214212955.1178947-2-piotr.oniszczuk@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chukun Pan [Tue, 26 Jul 2022 02:35:16 +0000 (10:35 +0800)]
arm64: dts: rockchip: Enable PCIe controller on rock3a
Add the nodes to enable the PCIe controller on the
Radxa ROCK3 Model A board. Run test with the MT7921
pcie wireless card.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chukun Pan [Tue, 26 Jul 2022 02:30:46 +0000 (10:30 +0800)]
arm64: dts: rockchip: add rtc to rock3a
Add devicetree node for hym8563 rtc to
Radxa ROCK3 Model A board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023046.5876-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Nicolas Frattaroli [Mon, 18 Jul 2022 03:31:45 +0000 (05:31 +0200)]
arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b
This adds the regulator node to the quartz64-b device tree,
and enables the PCIe 2 controller and combphy for it.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220718033145.792657-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan Jonker [Fri, 3 Jun 2022 16:35:39 +0000 (18:35 +0200)]
ARM: dts: rockchip: restyle emac nodes
The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan Jonker [Fri, 3 Jun 2022 16:35:38 +0000 (18:35 +0200)]
ARM: dts: rockchip: fix rk3036 emac node compatible string
The Linux kernel has no logic to decide which driver to probe first.
To prevent race conditions remove the rk3036 emac node
fall back compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Tue, 6 Sep 2022 21:03:24 +0000 (16:03 -0500)]
arm64: dts: rockchip: add Anbernic RG353P and RG503
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices
from Anbernic.
Both devices have:
- 2 SDMMC slots.
- A Realtek rtl8821cs WiFi/Bluetooth adapter.
- A mini HDMI port.
- A USB C host port and a USB C otg port (currently only working as
device).
- Multiple GPIO buttons and a single ADC button.
- Dual analog joysticks controlled via a GPIO mux.
- A headphone jack with amplified stereo speakers via a SGM4865 amp.
- A PWM based vibrator for force feedback.
The RG353P has:
- 2GB LPDDR4 RAM.
- A 32GB eMMC.
- A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c
controlled touchscreen (touchscreen is a Hynitron CST340).
The RG503 has:
- 1GB LPDDR4 RAM.
- A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung
with part number ams495qa04. Data for this panel is provided via the
DSI interface, however commands are sent via a 9-bit 3-wire SPI
interface. The MISO pin of SPI3 of the SOC is wired to the input of
the panel, so it must be bitbanged.
This devicetree enables the following hardware:
- HDMI (plus audio).
- Analog audio, including speakers.
- All buttons.
- All SDMMC/eMMC/SDIO controllers.
- The ADC joysticks (note a pending patch is required to use them).
- WiFi/Bluetooth (note out of tree drivers are required).
- The PWM based vibrator motor.
The following hardware is not enabled:
- The display panels (drivers are being written and there are issues
with the upstream DSI and VOP2 subsystems).
- Battery (driver pending).
- Touchscreen on the RG353P (note the i2c2 bus is enabled for it).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Tue, 6 Sep 2022 21:03:23 +0000 (16:03 -0500)]
dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503
Add entry for the Anbernic RG353P and RG503 handheld devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906210324.28986-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Tue, 6 Sep 2022 21:03:22 +0000 (16:03 -0500)]
dt-bindings: vendor-prefixes: add Anbernic
Anbernic designs and manufactures portable gaming systems.
https://anbernic.com/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906210324.28986-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wunderlich [Tue, 6 Sep 2022 16:42:12 +0000 (18:42 +0200)]
arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as
discussed on Mailinglist
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
FUKAUMI Naoki [Thu, 8 Sep 2022 03:17:26 +0000 (03:17 +0000)]
arm64: dts: rockchip: add LEDs for ROCK 4C+
add support for user LEDs on Radxa ROCK 4C+ board.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
FUKAUMI Naoki [Thu, 8 Sep 2022 03:17:25 +0000 (03:17 +0000)]
arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+
only user_led2 (blue) is supported.
user_led1 (green) is not connected to any gpio so it cannot be
controlled.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Sat, 27 Aug 2022 02:16:23 +0000 (21:16 -0500)]
arm64: dts: rockchip: add rk817 chg to Odroid Go Advance
Add the new rk817 charger driver to the Odroid Go Advance. Create a
monitored battery node as well for the charger to use. All values
from monitored battery are gathered from the BSP kernel for the
Odroid Go Advance provided by HardKernel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Arnd Bergmann [Thu, 8 Sep 2022 08:34:15 +0000 (10:34 +0200)]
Merge tag 'amlogic-arm64-dt-for-v6.1' of git://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.1:
- add Bindings & DT for Beelink GT1 Ultimate
- Remove invalid 'enable-active-low' on SM1 & G12A boards
- add Bindings & DT for the new JetHub D1p
* tag 'amlogic-arm64-dt-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson: add support for Beelink GT1 Ultimate
dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding
arm64: dts: meson-sm1-sei610: Remove 'enable-active-low'
arm64: dts: meson-g12a: Remove 'enable-active-low'
dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110)
arm64: dts: meson-axg: add support for JetHub D1p (j110)
Link: https://lore.kernel.org/r/d0079686-40ae-58b2-e58b-c8dc6361d7f0@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Bhadram Varka [Thu, 7 Jul 2022 07:48:14 +0000 (09:48 +0200)]
dt-bindings: net: Add Tegra234 MGBE
Add device-tree binding documentation for the Multi-Gigabit Ethernet
(MGBE) controller found on NVIDIA Tegra234 SoCs.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Ondrej Jirman [Sun, 4 Sep 2022 23:36:47 +0000 (01:36 +0200)]
arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro
Voltage constraints on vccio_sd are invalid. They don't match the voltages
that LDO9 can generate, and this causes rk808-regulator driver to fail
to probe with -EINVAL when it tries to apply the constraints during boot.
Fix the constraints to something that LDO9 can be actually configured for.
Fixes:
78a21c7d5952 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jagan Teki [Fri, 2 Sep 2022 06:50:57 +0000 (12:20 +0530)]
arm64: dts: rockchip: rk3399: Radxa ROCK 4C+
Add support for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jagan Teki [Fri, 2 Sep 2022 06:50:56 +0000 (12:20 +0530)]
arm64: dts: rockchip: Add RK3399-T OPP table
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz.
Add CPU operating points table for it.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jagan Teki [Fri, 2 Sep 2022 06:50:55 +0000 (12:20 +0530)]
dt-bindings: arm: rockchip: Document Radxa ROCK 4C+
Document the dt-bindings for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Christian Hewitt [Thu, 7 Jul 2022 09:39:54 +0000 (09:39 +0000)]
arm64: dts: meson: add support for Beelink GT1 Ultimate
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200)
reference design with the following specifications:
- 3GB DDR3 RAM
- 32GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- 10/100/1000 Ethernet
- AP6356S Wireless (802.11 a/b/g/n, BT 4.2)
- 3x USB 2.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power LED (white)
- 1x Reset button (internal)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com
Christian Hewitt [Thu, 7 Jul 2022 09:39:53 +0000 (09:39 +0000)]
dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding
Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate
Android Set-Top Box device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220707093954.21716-1-christianshewitt@gmail.com
Martijn Braam [Mon, 29 Aug 2022 05:00:40 +0000 (15:00 +1000)]
arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro
This is a basic DT containing regulators and UART, intended to be a
base that myself and others can add additional nodes in future patches.
Tested to work: booting from eMMC/SD, output over UART.
https://wiki.pine64.org/wiki/PinePhone_Pro
This is derived from the community pine64-org repo[0] with fixes from
https://megous.com/git/linux.
0. https://gitlab.com/pine64-org/linux/-/commit/
261d3b5f8ac503f97da810986d1d6422430c8531
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
[no SoB, but Kamil is happy for this patch to be submitted]
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: NÃcolas F. R. A. Prado <n@nfraprado.net>
Tested-by: NÃcolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220829050040.17330-2-tom@tom-fitzhenry.me.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tom Fitzhenry [Mon, 15 Aug 2022 12:30:03 +0000 (22:30 +1000)]
dt-bindings: arm: rockchip: Add PinePhone Pro bindings
Document board compatible names for Pine64 PinePhonePro.
https://wiki.pine64.org/wiki/PinePhone_Pro
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220815123004.252014-2-tom@tom-fitzhenry.me.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Sat, 9 Jul 2022 10:30:16 +0000 (18:30 +0800)]
arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610
EAIDK-610 is from OPEN AI LAB and popularly used by university
students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
This patch is test on Armbain and Glodroid with
HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT.
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Sat, 9 Jul 2022 10:30:01 +0000 (18:30 +0800)]
dt-bindings: arm: rockchip: Add EAIDK-610
EAIDK-610 is a rk3399 based board from OPEN AI LAB
and popularly used by university students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Sat, 9 Jul 2022 10:29:42 +0000 (18:29 +0800)]
dt-bindings: vendor-prefixes: Add OPEN AI LAB
Add vendor prefixes for OPEN AI LAB.
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220709102942.2753939-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Michael Riesch [Wed, 20 Jul 2022 09:15:27 +0000 (11:15 +0200)]
arm64: dts: rockchip: add csi dphy node to rk356x
Add the MIPI CSI DPHY node to the RK356x device tree.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220720091527.1270365-4-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wunderlich [Thu, 25 Aug 2022 19:38:36 +0000 (21:38 +0200)]
arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-6-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wunderlich [Thu, 25 Aug 2022 19:38:35 +0000 (21:38 +0200)]
arm64: dts: rockchip: Add PCIe v3 nodes to rk3568
Add nodes to rk356x devicetree to support PCIe v3.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-5-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Arnd Bergmann [Fri, 2 Sep 2022 10:41:20 +0000 (12:41 +0200)]
Merge tag 'renesas-dt-bindings-for-v6.1-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v6.1
- Document support for the R-Car H3Ne-1.7G SoC on the Salvator-XS and
ULCB development boards,
- Document system controller support for the RZ/Five SoC,
- Document support for the R-Car V3H2 SoC and the Condor-I development
board.
* tag 'renesas-dt-bindings-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas R-Car V3H2 SoC and board
dt-bindings: soc: renesas: renesas,rzg2l-sysc: Document RZ/Five SoC
dt-bindings: arm: renesas: Document R-Car H3Ne-1.7G SoC and boards
Link: https://lore.kernel.org/r/cover.1662111137.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 2 Sep 2022 10:22:49 +0000 (12:22 +0200)]
Merge tag 'renesas-arm-dt-for-v6.1-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v6.1
- SDHI and eMMC support for the R-Car S4-8 SoC and the Spider
development board,
- Timer (CMT and TMU) and SPI (MSIOF) support for the R-Car S4-8 SoC,
- External and GPIO interrupt support for the RZ/G2L and RZ/V2L SoCs,
- Initial support for the R-Car H3Ne-1.7G (R8A779MB) SoC,
- SPI DMA support for the RZ/G2UL, RZ/G2L, and RZ/V2L SoCs,
- Pin control and I2C support for the RZ/V2M SoC and the RZ/V2M
Evaluation Kit,
- initial support for the R-Car V3H2 (R8A77980A) SoC and the Condor-I
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (33 commits)
arm64: dts: renesas: Add V3H2 Condor-I board support
arm64: dts: renesas: Add r8a77980a.dtsi
arm64: dts: renesas: Add condor-common.dtsi
arm64: dts: renesas: Drop clock-names property from RPC node
arm64: dts: renesas: r8a779f0: Add MSIOF nodes
arm64: dts: renesas: r8a774a1: Put I2C aliases to board files
arm64: dts: renesas: r8a774e1: Rename i2c_dvfs to iic_pmic
arm64: dts: renesas: r8a779a0: Put I2C aliases to board files
arm64: dts: renesas: r8a77990: Put I2C aliases to board files
arm64: dts: renesas: r8a77980: Put I2C aliases to board files
arm64: dts: renesas: r8a77970: Put I2C aliases to board files
arm64: dts: renesas: r8a779{51|60|65}: Put I2C aliases to board files
arm64: dts: renesas: rzv2m evk: Enable i2c
arm64: dts: renesas: r9a09g011: Add i2c nodes
arm64: dts: renesas: r9a09g011: Add pinctrl node
arm64: dts: renesas: r9a07g043: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g054: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g044: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g043: Fix audio clk node names
arm64: dts: renesas: r9a07g054: Add DMA support to RSPI
...
Link: https://lore.kernel.org/r/cover.1662111128.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 2 Sep 2022 09:31:33 +0000 (11:31 +0200)]
Merge tag 'at91-dt-6.1' of git://git./linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1
It contains:
- one new LAN966X based board, namely lan966x-pcb8290
- gpio leds support for lan966x-pcb8291 and lan966x-pcb8309
- a cleanup for sam9x60ek to avoid DT compilation warning due to regulators
* tag 'at91-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: add led configuration
ARM: dts: at91: sam9x60ek: remove simple-bus for regulators
ARM: dts: lan966x: add support for pcb8290
Link: https://lore.kernel.org/r/20220902085845.4193579-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kuninori Morimoto [Mon, 29 Aug 2022 23:49:59 +0000 (23:49 +0000)]
arm64: dts: renesas: Add V3H2 Condor-I board support
This patch adds r8a77980A V3H2 (= r8a77980 ES2) Condor-I board
basic support.
Signed-off-by: Andrey Dolnikov <andrey.dolnikov@cogentembedded.com>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1v64nko.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Mon, 29 Aug 2022 23:49:52 +0000 (23:49 +0000)]
arm64: dts: renesas: Add r8a77980a.dtsi
This patch adds r8a77980A V3H2 (= r8a77980 ES2) basic SoC
support. It is using r8a77980 (= V3H) setting as-is for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgfm4nkw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Mon, 29 Aug 2022 23:49:41 +0000 (23:49 +0000)]
arm64: dts: renesas: Add condor-common.dtsi
We have V3H Condor board, and will have V3H2 Condor-I board.
This patch adds condor-common.dtsi to share the common settings
between these boards.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Mon, 29 Aug 2022 21:51:28 +0000 (22:51 +0100)]
arm64: dts: renesas: Drop clock-names property from RPC node
With 'unevaluatedProperties' support implemented, there are a number of
warnings when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: spi@
ee200000: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
The main problem is that the DT bindings do not allow clock-names.
So just drop the clock-names properties from the SoC DTSI files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220829215128.5983-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Horatiu Vultur [Fri, 2 Sep 2022 06:24:47 +0000 (08:24 +0200)]
ARM: dts: lan966x: add led configuration
Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which
are connected to the sgpio controller.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220902062447.443846-1-horatiu.vultur@microchip.com
Duc Nguyen [Mon, 29 Aug 2022 12:41:30 +0000 (14:41 +0200)]
arm64: dts: renesas: r8a779f0: Add MSIOF nodes
Add MSIOF nodes for R-Car S4-8.
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[thanh: added DMA]
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
[wsa: removed mso clock from clocks-property]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220829124130.2412-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Mon, 29 Aug 2022 23:50:07 +0000 (23:50 +0000)]
dt-bindings: arm: renesas: Document Renesas R-Car V3H2 SoC and board
This patch adds the new R-Car V3H2 SoC and the Condor-I board using it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnaq4nkh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Claudiu Beznea [Fri, 26 Aug 2022 08:39:27 +0000 (11:39 +0300)]
ARM: dts: at91: sam9x60ek: remove simple-bus for regulators
Keep regulators as individual devices. There is no need to have them
under simple bus. This will throw compilation warnings like:
- unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property.
- node has a unit name, but no reg or ranges property.
While at it move it down a bit in the file to keep entries sorted
alphabetically.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-10-claudiu.beznea@microchip.com
Horatiu Vultur [Thu, 25 Aug 2022 06:51:35 +0000 (08:51 +0200)]
ARM: dts: lan966x: add support for pcb8290
Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
quad-port) on the external MDIO bus and no SFP ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com
Michael Riesch [Tue, 12 Jul 2022 13:32:04 +0000 (15:32 +0200)]
arm64: dts: rockchip: specify pinctrl for i2c adapters on rock-3a
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI
connector and the M.2/NGFF connector use the non-default pins.
Specify the correct pinctrl but leave the adapters disabled (as
they are supposed to be activated by overlays that describe the
external hardware).
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Michael Riesch [Tue, 12 Jul 2022 13:32:03 +0000 (15:32 +0200)]
arm64: dts: rockchip: add vcc_mipi regulator to rock-3a
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Michael Riesch [Tue, 12 Jul 2022 13:32:02 +0000 (15:32 +0200)]
arm64: dts: rockchip: add vcc_cam regulator to rock-3a
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI CSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Arnd Bergmann [Mon, 29 Aug 2022 09:13:46 +0000 (11:13 +0200)]
Merge tag 'gemini-dts-v6.1-1' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini DTS updates for kernel v6.1:
- Enable Gigabit ethernet on SSI1328 and NS2502
- Modify NS2502 us use RedBoot partition parsing
* tag 'gemini-dts-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Let Gemini NS2502 parse redboot partitions
ARM: dts: gemini: ssi1328: permit to use gigabit
ARM: dts: gemini: ns2502: permit to use gigabit
Link: https://lore.kernel.org/r/CACRpkdZt58ExwG+6EicODLhuVc8NSgCGUj4uNQmtnES8Cnf5uQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fabio Estevam [Sat, 27 Aug 2022 20:38:13 +0000 (17:38 -0300)]
arm64: dts: meson-sm1-sei610: Remove 'enable-active-low'
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220827203813.1742715-2-festevam@denx.de
Fabio Estevam [Sat, 27 Aug 2022 20:38:12 +0000 (17:38 -0300)]
arm64: dts: meson-g12a: Remove 'enable-active-low'
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220827203813.1742715-1-festevam@denx.de
Wolfram Sang [Thu, 25 Aug 2022 07:10:22 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a774a1: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Fri, 26 Aug 2022 14:49:48 +0000 (16:49 +0200)]
arm64: dts: renesas: r8a774e1: Rename i2c_dvfs to iic_pmic
As RZ/G2 SoCs do not support DVFS, the "iic-dvfs" module was renamed to
"iic-pmic" in the RZ/G Series, 2nd Generation User’s Manual: Hardware
Rev. 1.00.
See also commit
a636d8037ef6028a ("arm64: dts: renesas: rzg2: Rename
i2c_dvfs to iic_pmic"), which apparently forgot to update RZ/G2H.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7d60653d4d63904dc025a133297a53eb885fa064.1661525361.git.geert+renesas@glider.be
Wolfram Sang [Thu, 25 Aug 2022 07:10:21 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a779a0: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Wolfram Sang [Thu, 25 Aug 2022 07:10:20 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a77990: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Wolfram Sang [Thu, 25 Aug 2022 07:10:19 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a77980: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Wolfram Sang [Thu, 25 Aug 2022 07:10:18 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a77970: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Wolfram Sang [Thu, 25 Aug 2022 07:10:17 +0000 (09:10 +0200)]
arm64: dts: renesas: r8a779{51|60|65}: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Phil Edworthy [Fri, 19 Aug 2022 19:39:44 +0000 (20:39 +0100)]
arm64: dts: renesas: rzv2m evk: Enable i2c
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220819193944.337599-4-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Phil Edworthy [Fri, 19 Aug 2022 19:39:43 +0000 (20:39 +0100)]
arm64: dts: renesas: r9a09g011: Add i2c nodes
Add device nodes for the I2C controllers that are not assigned to the
ISP.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220819193944.337599-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Linus Torvalds [Sun, 28 Aug 2022 22:05:29 +0000 (15:05 -0700)]
Linux 6.0-rc3
Linus Torvalds [Sun, 28 Aug 2022 21:49:59 +0000 (14:49 -0700)]
Merge tag 'mm-hotfixes-stable-2022-08-28' of git://git./linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
Linus Torvalds [Sun, 28 Aug 2022 21:36:27 +0000 (14:36 -0700)]
Merge tag 'bitmap-6.0-rc3' of github.com:/norov/linux
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c28c ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
projects / linux-2.6-microblaze.git / log