drm/i915/fbdev: Fix smem_start for LMEMBAR stolen objects

The "io" address of an object is its dma address minus the
region.start. Subtract the latter to make smem_start correct.
The current code happens to work for genuine LMEM objects
as LMEM region.start==0, but for LMEMBAR stolen objects
region.start!=0.

TODO: perhaps just set smem_start=0 always as our .fb_mmap()
implementation no longer depends on it? Need to double check
it's not needed for anything else...

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-14-ville.syrjala@linux.intel.com

drm/i915: Simplify intel_initial_plane_config() calling convention

There's no reason the caller of intel_initial_plane_config() should
have to loop over the CRTCs. Pull the loop into the function to
make life simpler for the caller.

v2: "fix" xe

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-13-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Split the smem and lmem plane readout apart

Declutter initial_plane_vma() a bit by pulling the lmem and smem
readout paths into their own functions.

TODO: the smem path should still be fixed to get and validate
      the dma address from the pte as well

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-12-ville.syrjala@linux.intel.com

drm/i915: s/phys_base/dma_addr/

The address we read from the PTE is a dma address, not a physical
address. Rename the variable to say so.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-11-ville.syrjala@linux.intel.com

drm/i915: Fix MTL initial plane readout

MTL stolen memory looks more like local memory, so use the
(now fixed) lmem path when doing the initial plane readout.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-10-ville.syrjala@linux.intel.com

drm/i915: Fix region start during initial plane readout

On MTL the stolen region starts at offset 8MiB from the start of
LMEMBAR. The dma addresses are thus also offset by 8MiB. However the
mm_node/etc. is zero based, and i915_pages_create_for_stolen() will
add the appropriate region.start into the sg dma address. So when
we do the readout we need to convert the dma address read from
the PTE to be zero based as well.

Note that currently we don't take this path on MTL, but we should
and thus this needs to be fixed. For lmem this works correctly
already as the lmem region.start==0.

While at it let's also make sure the address points to somewhere within
the memory region. We don't need to check the size as
i915_gem_object_create_region_at() should later fail if the object size
exceeds the region size.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-9-ville.syrjala@linux.intel.com

drm/i915: Fix PTE decode during initial plane readout

When multiple pipes are enabled by the BIOS we try to read out each
in turn. But we do the readout for the second only after the inherited
vma for the first has been rebound into its original place (and thus
the PTEs have been rewritten). Unlike the BIOS we set some high caching
bits in the PTE on MTL which confuses the readout for the second plane.
Filter out the non-address bits from the PTE value appropriately to
fix this.

I suppose it might also be possible that the BIOS would already set
some caching bits as well, in which case we'd run into this same
issue already for the first plane.

TODO:
- should abstract the PTE decoding to avoid details leaking all over
- should probably do the readout for all the planes before
  we touch anything (including the PTEs) so that we truly read
  out the BIOS state

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-8-ville.syrjala@linux.intel.com

drm/i915: Rename the DSM/GSM registers

0x108100 and 0x1080c0 have been around since snb. Rename the
defines appropriately.

v2: Rebase

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-7-ville.syrjala@linux.intel.com

drm/i915: Disable the "binder"

Now that the GGTT PTE updates go straight to GSMBASE (bypassing
GTTMMADR) there should be no more risk of system hangs? So the
"binder" (ie. update the PTEs via MI_UPDATE_GTT) is no longer
necessary, disable it.

My main worry with the MI_UPDATE_GTT are:
- only used on this one platform so very limited testing coverage
- async so more opprtunities to screw things up
- what happens if the engine hangs while we're waiting for MI_UPDATE_GTT
  to finish?
- requires working command submission, so even getting a working
  display now depends on a lot more extra components working correctly

TODO: MI_UPDATE_GTT might be interesting as an optimization
though, so perhaps someone should look into always using it
(assuming the GPU is alive and well)?

v2: Keep using MI_UPDATE_GTT on VM guests
v3: use i915_direct_stolen_access()

Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-6-ville.syrjala@linux.intel.com

drm/i915: Bypass LMEMBAR/GTTMMADR for MTL stolen memory access

On MTL accessing stolen memory via the BARs is somehow borked,
and it can hang the machine. As a workaround let's bypass the
BARs and just go straight to DSMBASE/GSMBASE instead.

Note that on every other platform this itself would hang the
machine, but on MTL the system firmware is expected to relax
the access permission guarding stolen memory to enable this
workaround, and thus direct CPU accesses should be fine.

The raw stolen memory areas won't be passed to VMs so we'll
need to risk using the BAR there for the initial setup. Once
command submission is up we should switch to MI_UPDATE_GTT
which at least shouldn't hang the whole machine.

v2: Don't use direct GSM/DSM access on guests
    Add w/a number
v3: Check register 0x138914 to see if pcode did its job
    Add some debug prints

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-5-ville.syrjala@linux.intel.com

drm/i915: Remove ad-hoc lmem/stolen debugs

Now that intel_memory_regions_hw_probe() prints out each and every
memory region there's no reason to have ad-hoc debugs to do similar
things elsewhere.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-4-ville.syrjala@linux.intel.com

drm/i915: Print memory region info during probe

Dump the details about every memory region into dmesg at probe time.
Avoids having to dig those out from random places when debugging stuff.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-3-ville.syrjala@linux.intel.com

drm/i915: Use struct resource for memory region IO as well

mem->region is a struct resource, but mem->io_start and
mem->io_size are not for whatever reason. Let's unify this
and convert the io stuff into a struct resource as well.
Should make life a little less annoying when you don't have
juggle between two different approaches all the time.

Mostly done using cocci (with manual tweaks at all the
places where we mutate io_size by hand):
@@
struct intel_memory_region *M;
expression START, SIZE;
@@
- M->io_start = START;
- M->io_size = SIZE;
+ M->io = DEFINE_RES_MEM(START, SIZE);

@@
struct intel_memory_region *M;
@@
- M->io_start
+ M->io.start

@@
struct intel_memory_region M;
@@
- M.io_start
+ M.io.start

@@
expression M;
@@
- M->io_size
+ resource_size(&M->io)

@@
expression M;
@@
- M.io_size
+ resource_size(&M.io)

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-2-ville.syrjala@linux.intel.com

drm/i915/hdcp: Pin the hdcp gsc message high in ggtt

AFAICS there is no hardware restriction on where in ggtt
the hdcp gsc message object needs to be bound. And as it's
a regular shmem object we don't need it be in the mappabe
range either. So pin it high to make avoid needlessly
wasting the precious mappable range for it.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-3-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>

drm/i915/hdcp: Do intel_hdcp_component_init() much later during init

intel_hdcp_component_init()->...->intel_hdcp_gsc_initialize_message()
will allocate ggtt address space for some hdcp gsc message thing.
That is currently being done way too early as we haven't even
taken over the BIOS fb yet. So this has the potential of corrupting
ggtt PTEs that need to be preserved until the BIOS fb takover
is done.

Only call intel_hdcp_component_init() once all the BIOS fb takeover,
and full ggtt init (which currently also needs to reserve very
specific ranges of ggtt, thus assuming that no one else has stolen
them yet) is done.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-2-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>

drm/i915/fbc: Allow FBC with CCS modifiers on SKL+

Only display workarounds 0391 and 0475 call for disabling
FBC with render compression, and those are listed only for
pre-prod SKL steppings. So it should be safe to enable
FB+CCS on production hardware.

AFAIK CCS is limited to 50% bandwidth reduction (perhaps
clear color can do better?). FBC can exceed that number
by quite a bit, given the right kind of framebuffer
contents. So piling on both kinds of compressions could
still make sense.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10125
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123090244.30025-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Extract intel_atomic_swap_state()

Pull all the state swap stuff into its own function to declutter
intel_atomic_commit() a bit.

Note that currently the state swap is spread across both
sides of the unprepare branch in intel_atomic_commit(), but
we can pull all of it ahead a bit since we bail on the first
error, and thus there is no change in behaviour from the
reordering.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219130756.25986-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Rework global state serializaiton

Instead of injecting extra crtc commits to serialize the global
state let's hand roll a bit of commit machinery to take care of
the hardware synchronization.

Rather than basing everything on the crtc commits we track these
as their own thing. I think this makes more sense as the hardware
blocks we are working with are not in any way tied to the pipes,
so the completion should not be tied in with the vblank machinery
either.

The difference to the old behaviour is that:
- we no longer pull extra crtcs into the commit which should
  make drm_atomic_check_only() happier
- since those crtcs don't get pulled in we also don't end up
  reprogamming them and thus don't need to wait their vblanks
  to pass/etc. So this should be tad faster as well.

TODO: perhaps have each global object complete its own commit
once the post-plane update phase is done?

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6728
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219130756.25986-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Compute use_sagv_wm differently

drm_atomic_check_only() gets upset if we try to add extra crtcs
to any commit that isn't flagged with DRM_MODE_ATOMIC_ALLOW_MODESET.
This conflicts with how SAGV watermarks work on pre-ADL as we
need to manually switch over the SAGV watermarks before we can
safely enable SAGV.

So in order to make SAGV usage possible we need to compute each
pipe's use of SAGV watermarks as if there aren't any other
active pipes. Ie. if the current pipe isn't the one blocking
SAGV then we make it use the SAGV watermarks, even if some
other pipe prevents SAGV from actually being used. Otherwise
we could end up with a pipes using the normal watermarks (but
not blocking SAGV), and some other pipe in parallel enabling
SAGV, which would likely cause underruns.

The alternative approach of preventing SAGV usage until all
pipes simultanously end up using SAGV watermarks would only
really work if userspace always adds all pipes to every
commits, which isn't the case typically.

The downside of this is that we will end up using the less
optimal SAGV watermarks even if some other pipe prevents
SAGV from actually being enabled. In which case the system
won't achieve the minimum possible power consumption.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219130756.25986-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/display: Include debugfs.h in intel_display_debugfs_params.c

Commit 8015bee0bfec ("drm/i915/display: Add framework to add parameters
specific to display") added the file intel_display_debugfs_params.c,
which calls the functions "debugfs_create_{bool, ulong, str}" -- all of
which are defined in <linux/debugfs.h>. The missing inclusion of this
header file is breaking the ChromeOS build -- add an explicit include
to fix that.

Signed-off-by: Paz Zcharya <pazz@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131204658.795278-1-pazz@chromium.org

drm/i915/xe2lpd: Move registers to PICA

Some registers for DDI A/B moved to PICA and now follow the same format
as the ones for the PORT_TC ports. The wrapper here deals with 2 issues:

- Share the implementation between xe2lpd and previous
  platforms: there are minor layout changes, it's mostly the
  register location that changed
- Handle offsets after TC ports

v2:
  - Explain better the trick to use just the second range (Matt Roper)
  - Add missing conversions after rebase (Matt Roper)
  - Use macro instead of inline function, avoiding includes in the
    header (Jani)
  - Prefix old macros with underscore so they don't get used by mistake,
    and name the new ones using the previous names
v3: Use the same logic for the recently-introduced XELPDP_PORT_MSGBUS_TIMER
    (Gustavo)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126224638.4132016-3-lucas.demarchi@intel.com

drm/i915/xe2lpd: Move D2D enable/disable

Bits to enable/disable and check state for D2D moved from
XELPDP_PORT_BUF_CTL1 to DDI_BUF_CTL (now named DDI_CTL_DE in the spec).
Make the functions mtl_ddi_disable_d2d() and mtl_ddi_enable_d2d generic
to work with multiple reg location and bitfield layout.

v2: Set/Clear XE2LPD_DDI_BUF_D2D_LINK_ENABLE in saved_port_bits when
    enabling/disabling D2D so DDI_BUF_CTL is correctly programmed in
    other places without overriding these bits (Clint)
v3: Leave saved_port_bits alone as those bits are not meant to be
    modified outside of the port initialization. Rather propagate the
    additional bit in DDI_BUF_CTL to be set when that register is
    written again after D2D is enabled.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126224638.4132016-2-lucas.demarchi@intel.com

drm/i915: Convert PLL flags to booleans

No real reason why the PLL flags need to be a bitmask. Switch
to booleans to make the code simpler.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Suppress old PLL pipe_mask checks for MG/TC/TBT PLLs

TC ports have both the MG/TC and TBT PLLs selected simultanously (so
that we can switch from MG/TC to TBT as a fallback). This doesn't play
well with the state checker that assumes that the old PLL shouldn't
have the pipe in its pipe_mask anymore. Suppress that check for these
PLLs to avoid spurious WARNs when you disconnect a TC port and a
non-disabling modeset happens before actually disabling the port.

v2: Only suppress when one of the PLLs is the TBT PLL and the
    other one is not

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9816
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Include the PLL name in the debug messages

Make the log easier to parse by including the name of the PLL
in the debug prints regarding said PLL.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Try to preserve the current shared_dpll for fastset on type-c ports

Currently icl_compute_tc_phy_dplls() assumes that the active
PLL will be the TC PLL (as opposed to the TBT PLL). The actual
PLL will be selected during the modeset enable sequence, but
we need to put *something* into the crtc_state->shared_dpll
already during compute_config().

The downside of assuming one PLL or the other is that we'll
fail to fastset if the assumption doesn't match what was in
use previously. So let's instead keep the same PLL that was
in use previously (assuming there was one). This should allow
fastset to work again when using TBT PLL, at least in the
steady state.

Now, assuming we want keep the same PLL may not be entirely
correct either. But we should be covered by the type-c link
reset handling which will force a full modeset by flagging
connectors_changed=true which means the resulting modeset
can't be converted into a fastset even if the full crtc state
looks identical.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118142436.25928-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>

Revert "drm/i915/xe2lpd: Treat cursor plane as regular plane for DDB allocation"

This reverts commit cfeff354f70bb1d0deb0279506e3f7989bc16e28.

A core design consideration with legacy cursor updates is that the
cursor must not touch any other plane, even if we were to force it
to take the slow path. That is the real reason why the cursor uses
a fixed ddb allocation, not because bspec says so.

Treating cursors as any other plane during ddb allocation
violates that, which means we can now pull other planes into
fully unsynced legacy cursor mailbox commits. That is
definitely not something we've ever considered when designing
the rest of the code. The noarm+arm register write split in
particular makes that dangerous as previous updates can get
disarmed pretty much at any random time, and not necessarily
in an order that is actually safe (eg. against ddb overlaps).

So if we were to do this then:
- someone needs to expend the appropriate amount of brain
  cells thinking through all the tricky details
- we should do it for all skl+ platforms since all
  of those have double buffered wm/ddb registers. The current
  arbitrary mtl+ cutoff doesn't really make sense

For the moment just go back to the original behaviour where
the cursor's ddb alloation does not change outside of
modeset/fastset. As of now anything else isn't safe.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-10-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Perform vblank evasion around legacy cursor updates

Our legacy cursor updates are actually mailbox updates.
Ie. the hardware latches things once per frame on start of
vblank, but we issue an number of updates per frame,
withough any attempt to synchronize against the vblank
in software. So in theory only the last update issued
during the frame will latch, and the previous ones are
discarded.

However this can lead to problems with maintaining the
ggtt/iommu mappings as we have no idea which updates
will actually latch.

The problem is exacerbated by the hardware's annoying disarming
behaviour; any non-arming register write will disarm an already
armed update, only to be rearmed later by the arming register
(CURBASE in case of cursors). If a disarming write happens
just before the start of vblank, and the arming write happens
after start of vblank we have effectively prevented the hardware
from latching anything. And if we manage to straddle multiple
sequential vblank starts in this manner we effectively prevent
the hardware from latching any new registers for an arbitrary
amount of time. This provides more time for the (potentially
still in use by the hardware) gtt/iommu mappings to be torn
down.

A partial solution, of course, is to use vblank evasion to
avoid the register writes from spreading on both sides of
the start of vblank.

I've previously highlighted this problem as a general issue
affecting mailbox updates. I even added some notes to the
{i9xx,skl}_crtc_planes_update_arm() to remind us that the noarm
and arm phases both need to pulled into the vblank evasion
critical section if we actually decided to implement mailbox
updates in general. But as I never impelemented the noarm+arm
split for cursors we don't have to worry about that for the
moment.

We've been lucky enough so far that this hasn't really caused
problems. One thing that does help is that Xorg generally
sticks to the same cursor BO. But igt seems pretty good at
hitting this on MTL now, so apparently we have to start
thinking about this.

v2: Wait for PSR exit to avoid the vblank evasion timeout (1ms)
    tripping due to PSR exit latency (~5ms typically)

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116204927.23499-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Move intel_vblank_evade() & co. into intel_vblank.c

intel_vblank.c seems like the appropriate place for the core
vblank evasion code. Move it there.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Move the min/max scanline sanity check into intel_vblank_evade()

There isn't really any reason to make the caller suffer through
checking the vblank evasion min/max scanlines. If we somehow
ended up with bogus values (which really shouldn't happen)
then just skip the actual vblank evasion loop but otherwise
plow ahead as normal.

The only "real" change is that we now get+put a vblank reference
even if the min/max values are bogus, previously we skipped
directly to the end.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Extract intel_vblank_evade()

Pull the core vblank evasion loop into its own function,
so that we can reuse it elsewhere later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Include need_vlv_dsi_wa in intel_vblank_evade_ctx

Pull the need_vlv_dsi_wa details into intel_vblank_evade_init()
so that caller doesn't have to care about it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Introduce struct intel_vblank_evade_ctx

Collect the information needed for vblank evasions into
a structure that we can pass around more easily.

And let's rename intel_crtc_vblank_evade_scanlines() to just
intel_vblank_evade_init() so that better describes the intended
usage of initializing the context.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Reorder drm_vblank_put() vs. need_vlv_dsi_wa

Drop the vblank reference only after we've done the hideous
need_vlv_dsi_wa stuff. This will make it easier to reuse the
the vblank evasion machinery elsewhere.

Keeping the vblank reference for a bit longer is not a
problem. In fact we might want to not drop it at all until
intel_pipe_update_end(), but we'll leave that idea for later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Decouple intel_crtc_vblank_evade_scanlines() from atomic commits

We'll be needing to do vblank evasion around legacy cursor updates,
which don't have the intel_atomic_state around. So let's remove
this dependency on a full commit and pass the crtc state in by hand.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213102519.13500-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Replace a memset() with zero initialization

Declaring a struct and immediately zeroing it with memset()
seems a bit silly to me. Just zero initialize the struct
when declaring it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124082735.25470-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/psr: Only allow PSR in LPSP mode on HSW non-ULT

On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.

I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.

As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.

Cc: stable@vger.kernel.org
Fixes: 783d8b80871f ("drm/i915/psr: Re-enable PSR1 on hsw/bdw")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>

drm/i915: Add additional ARL PCI IDs

Our existing MTL driver handling is also sufficient to handle ARL, so
these IDs are simply added to the MTL ID list.

Bspec: 55420
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-2-haridhar.kalvala@intel.com

drm/i915/opregion: remove unused lid_state

Not sure if lid_state has ever been used, but at least not for a long
time. Remove it.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122546.1551400-1-jani.nikula@intel.com

drm/i915: Drop -Wstringop-overflow

-Wstringop-overflow is broken on GCC11. In future changes it will
be moved to the normal C flags in the top level Makefile (out of
Makefile.extrawarn), but accounting for the compiler support.

Just remove it out of i915's forced extra warnings, preparing for the
upcoming change and avoiding build warnings to show up.

Fixes: 2250c7ead8ad ("drm/i915: enable W=1 warnings by default")
References: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112154912.1775199-1-lucas.demarchi@intel.com

Revert "drm/i915/dsi: Do display on sequence later on icl+"

This reverts commit 88b065943cb583e890324d618e8d4b23460d51a3.

Lenovo 82TQ is unhappy if we do the display on sequence this
late. The display output shows severe corruption.

It's unclear if this is a failure on our part (perhaps
something to do with sending commands in LP mode after HS
/video mode transmission has been started? Though the backlight
on command at least seems to work) or simply that there are
some commands in the sequence that are needed to be done
earlier (eg. could be some DSC init stuff?). If the latter
then I don't think the current Windows code would work
either, but maybe this was originally tested with an older
driver, who knows.

Root causing this fully would likely require a lot of
experimentation which isn't really feasible without direct
access to the machine, so let's just accept failure and
go back to the original sequence.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116210821.30194-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/opregion: make struct intel_opregion opaque

With the recent cleanups, only intel_opregion.c needs to know the
definition of struct intel_opregion. Allocate it dynamically and make it
opaque.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b68d7ff4b2930eaf15d9657618a738b9065f64b.1704992868.git.jani.nikula@intel.com

drm/i915/gvt: use local INTEL_GVT_OPREGION_SIZE

All of gvt uses INTEL_GVT_OPREGION_SIZE for opregion size. Follow suit
here.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8ae6e10fc0929934a14547a973312e82a4d7f7d1.1704992868.git.jani.nikula@intel.com

drm/i915/opregion: abstract ASLE presence check

Add a function to check the opregion ASLE presence instead of accessing
the opregion structures directly.

Reorder the checks in i915_has_asle() to avoid the function call if
possible.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1829415d3e7b29e78c46b20bca8175ef373bcd92.1704992868.git.jani.nikula@intel.com

drm/i915/opregion: abstract getting the opregion VBT

Add a function to get the opregion VBT instead of accessing the opregion
structures directly.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8205b8fa724f98bbf1f76c59e661909d874e843e.1704992868.git.jani.nikula@intel.com

drm/i915/opregion: move i915_opregion debugfs to intel_opregion.c

All things about opregion should be placed in intel_opregion.c.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c10103d2dd775edc1e9f93f09d0834480f880596.1704992868.git.jani.nikula@intel.com

drm/i915/bios: move i915_vbt debugfs to intel_bios.c

All things VBT should be placed in intel_bios.c.

While at it, shove in a FIXME comment about VBT possibly originating
from other places than opregion.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5e14a9559b6916022b506e5eb8d943783dc627a2.1704992868.git.jani.nikula@intel.com

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

nouveau/gsp: handle engines in runl without nonstall interrupts.

It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.

This should let nouveau/gsp work on those.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/all/20240110011826.3996289-1-airlied@gmail.com/

drm/i915/psr: CAN_PSR and CAN_PANEL_REPLAY can be now local defines

CAN_PSR and CAN_PANEL_REPLAY are not used outside intel_psr.c anymore. Make
them as intel_psr.c local defines.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109100517.1947414-3-jouni.hogander@intel.com

drm/i915/display: No need for full modeset due to psr

There is no specific reason to force full modeset if psr is enabled.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Reviewed-by: Stanislav Lisovskiy <staniskav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109100517.1947414-2-jouni.hogander@intel.com

Merge tag 'drm-misc-next-fixes-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A fix for the v3d register readout, and two compilation fixes for
rockchip.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/warlsyhbwarbezejzokxvrpnmvoaajonj6khjobvnfrhttrsks@fqoeqrjrct6l

Merge tag 'drm-intel-next-fixes-2024-01-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZZ_IOcLiDG9LJafO@jlahtine-mobl.ger.corp.intel.com

drm/i915/perf: reconcile Excess struct member kernel-doc warnings

Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.

i915_perf_types.h:341: warning: Excess struct member 'ptr_lock' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'head' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'tail' description in 'i915_perf_stream'
3 warnings as Errors

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-4-rdunlap@infradead.org
(cherry picked from commit aa253baca534357e033bd29b074ce1eade2a9362)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: reconcile Excess struct member kernel-doc warnings

Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.

intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fad3e2107503e99cfe9cc0c9cba19dad)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: reconcile Excess struct member kernel-doc warnings

Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.

intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc'

Also add missing field member descriptions.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228234946.12405-1-rdunlap@infradead.org
(cherry picked from commit cd1d91115ff1929ec346d85f512ef260ddf8131e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gem: reconcile Excess struct member kernel-doc warnings

Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.

i915_gem_context_types.h:420: warning: Excess struct member 'lock' description in 'i915_gem_context'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-1-rdunlap@infradead.org
(cherry picked from commit 7353c3d7c15017140a8b984e41f94be0bf535e73)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/dp: Fix the max DSC bpc supported by source

Use correct helper for getting max DSC bpc supported by the source.

Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
(cherry picked from commit cd7b0b2dd3d9fecc6057c07b40e8087db2f9f71a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: don't make assumptions about intel_wakeref_t type

intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.

The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
(cherry picked from commit de06b42edc5bf05aefbb7e2f59475d6022ed57e1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors

MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.

Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.

v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.

Fixes: ef75c25e8fed ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
(cherry picked from commit 9b0b61c5bc08e1aa55a0c1e7cda28f952b2d02cc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/display: Fix C20 pll selection for state verification

Add pll selection check for C20 as well as
clock state verification0. We have been relying
on sw state to select A or B pll's. This is incorrect
as the hw might see this selection differently. This
patch fixes this shortcoming by reading pll selection
for both sw and hw states and compares if these two
selections match.

Fixes: 59be90248b42 ("drm/i915/mtl: C20 state verification")

v2: reword commit message and include fix to a
    original commit (Imre)
    Compare pll selection (Jani)

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-2-mika.kahola@intel.com
(cherry picked from commit f4304beadd88d074333b23fdc7f35d00ee763e14)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'drm-intel-gt-next-2023-12-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Eliminate use of kmap_atomic() in i915 (Zhao)
- Add Wa_14019877138 for DG2 (Haridhar)
- Static checker and spelling fixes (Colin, Karthik, Randy)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXxCibZZQqlqhDN3@jlahtine-mobl.ger.corp.intel.com

drm/v3d: Fix support for register debugging on the RPi 4

RPi 4 uses V3D 4.2, which is currently not supported by the register
definition stated at `v3d_core_reg_defs`. We should be able to support
V3D 4.2, therefore, change the maximum version of the register
definition to 42, not 41.

Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109113126.929446-1-mcanal@igalia.com

drm/i915/psr: Disable early transport by default

Early transport validation is currently incomplete. Due to this disable the
feature by default.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-8-jouni.hogander@intel.com

drm/i915/psr: Enable psr2 early transport as possible

Check source and sink support for psr2 early transport and enable
it if not disabled by debug flag.

Bspec: 68934

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-7-jouni.hogander@intel.com

drm/i915/psr: Configure PIPE_SRCSZ_ERLY_TPT for psr2 early transport

There is a new register used to configure selective update area size
for early transport.

Configure PIPE_SRCSZ_ERLY_TPT using calculated selective update area
carried in crtc_state->su_area.

Bspec: 68927

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-6-jouni.hogander@intel.com

drm/i915/psr: Calculate and configure CUR_POS_ERLY_TPT

New register CUR_POS_ERLY_TPT related to early transport is
supposed to be configured when early transport is in use.

This register is used to configure cursor vertical postion
from beginning of selective update area.

Bspec: 68927

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-5-jouni.hogander@intel.com

drm/i915/psr: Carry su area in crtc_state

Su_area is needed when configuring CUR_POS_ERLY_TPT and
PIPE_SRC_SZ_ERLY_TPT. Store it into intel_crtc_state->psr2_su_area.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-4-jouni.hogander@intel.com

drm/i915/psr: Extend SU area to cover cursor fully if needed

In case early transport is enabled SU area needs to be extended
to cover cursor area fully when cursor is in SU area.

Bspec: 68927

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-3-jouni.hogander@intel.com

drm: Add eDP 1.5 early transport definition

Add DP_PSR_ENABLE_SU_REGION_ET to enable panel early transport.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-2-jouni.hogander@intel.com

drm/i915/dp: Fix the max DSC bpc supported by source

Use correct helper for getting max DSC bpc supported by the source.

Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com

Merge tag 'amd-drm-next-6.8-2024-01-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.8-2024-01-05:

amdgpu:
- VRR fixes
- PSR-SU fixes
- SubVP fixes
- DCN 3.5 fixes
- Documentation updates
- DMCUB fixes
- DML2 fixes
- UMC 12.0 updates
- GPUVM fix
- Misc code cleanups and whitespace cleanups
- DP MST fix
- Let KFD sync with GPUVM fences
- GFX11 reset fix
- SMU 13.0.6 fixes
- VSC fix for DP/eDP
- Navi12 display fix
- RN/CZN system aperture fix
- DCN 2.1 bandwidth validation fix
- DCN INIT cleanup

amdkfd:
- SVM fixes
- Revert TBA/TMA location change

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105220522.4976-1-alexander.deucher@amd.com

drm/i915/cdclk: Re-use bxt_cdclk_ctl() when sanitizing

The function bxt_cdclk_ctl() is responsible for deriving the value for
CDCLK_CTL; use it instead of repeating the same logic.

v2:
  - Use a better commit message body by making it more self-contained
    and not referring to stuff from the subject line. (Matt)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-5-gustavo.sousa@intel.com

drm/i915/cdclk: Reorder bxt_sanitize_cdclk()

Make the sequence of steps in bxt_sanitize_cdclk() more logical by
grouping things related to the check on the value of CDCLK_CTL into a
single "block". Also, this will make an upcoming change replacing that
block with a single function call easier to follow.

v2:
  - Improve body of commit message to be more self-contained.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-4-gustavo.sousa@intel.com

drm/i915/cdclk: Extract bxt_cdclk_ctl()

Extract logic for deriving the value for CDCLK_CTL into bxt_cdclk_ctl().
This makes the code better readable and will be used later in
bxt_sanitize_cdclk().

v2:
  - Improve body of commit message to be more self-contained.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-3-gustavo.sousa@intel.com

drm/i915/xe2lpd: Update bxt_sanitize_cdclk()

With Xe2_LPD, there were changes to the way CDCLK_CTL must be
programmed. Those were reflected on _bxt_set_cdclk() with commit
3d3696c0fed1 ("drm/i915/lnl: Start using CDCLK through PLL"), but
bxt_sanitize_cdclk() was left out.

This was causing some issues when loading the driver with a pre-existing
active display configuration: the driver would mistakenly take the
current value of CDCLK_CTL as wrong and the sanitization would be
triggered.

In a scenario where the display was already configured with a high
CDCLKC and had plane(s) enabled, FIFO underrun errors were reported,
because the current sanitization code selects the minimum possible
CDCLK.

Fix that by updating bxt_sanitize_cdclk() to match the changes made in
_bxt_set_cdclk(). Ideally, we would have a common function to derive the
value for CDCLK_CTL, but that can be done in a future change.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-2-gustavo.sousa@intel.com

drm/i915/dp: Abort AUX on disconnected native DP ports

An AUX transfer on any disconnected DP port results in long
timeout/retry delays the same way as this is described for TypeC port in

commit a972cd3f0eb5 ("drm/i915/tc: Abort DP AUX transfer on a disconnected TC port")

Prevent the delay on non-TypeC ports as well by aborting the transfer if
the port is disconnected. For eDP keep the current behavior as the
support for HPD signaling is optional for it.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-13-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Filter out glitches on HPD lines during hotplug detection

Glitches deasserting the connector HPD line can lead to incorrectly
detecting a disconnect event (a glitch asserting the line will only
cause a redundant connect->disconnect transition). The source of such a
glitch can be noise on the line or a 0.5ms-1ms MST IRQ_HPD pulse. TypeC
ports in the DP-alt or TBT-alt mode filter out these glitches inernally,
but for others the driver has to do this. Make it so by polling the HPD
line on these connectors for 4 ms.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-12-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Add intel_digital_port lock/unlock hooks

Add hooks to intel_digital_port to lock and unlock the port and add a
helper to check the connector's detect status while the port is locked
already. This simplifies checking the connector detect status in
intel_dp_aux_xfer() and intel_digital_port_connected() in the next two
patches aborting AUX transfers on all DP connectors (except eDP) and
filtering HPD glitches.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-11-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Disable hotplug detection handlers during driver init/shutdown

As described in the previous two patches an unexpected connector
detection can happen during the init/shutdown sequences. Prevent these
by returning the connector's current status from the detection handlers.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-10-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Disable hotplug detection works during driver init/shutdown

As described in the previous patch, an unexpected connector
detection/modeset started from the intel_hotplug::hotplug_work can
happen during the driver init/shutdown sequence. Prevent these by
disabling the queuing of and flushing all the intel_hotplug work that
can start them at the beginning of the init/shutdown sequence and allow
the queuing only while the display is in the initialized state.

Other work items - like the intel_connector::modeset_retry_work or the
MST probe works - are still enabled and can start a detection/modeset,
but after the previous patch these will be rejected. Disabling these
works as well is for a follow-up patchset.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-9-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Prevent modesets during driver init/shutdown

An unexpected modeset or connector detection by a user (user space or FB
console) during the initialization/shutdown sequence is possible either
via a hotplug IRQ handling work or via the connector sysfs
(status/detect) interface. These modesets/detections should be prevented
by disabling/flushing all related hotplug handling work and
unregistering the interfaces that can start them at the beginning of the
shutdown sequence. Some of this - disabling all related intel_hotplug
work - will be done by the next patch, but others - for instance
disabling the MST hotplug works - require a bigger rework.

It makes sense - for diagnostic purpose, even with all the above work and
interface disabled - to detect and reject any such user access. This
patch does that for modeset accesses and a follow-up patch for connector
detection.

During driver loading/unloading/system suspend/shutdown and during
system resume after calling intel_display_driver_disable_user_access()
or intel_display_driver_resume_access() correspondigly, the current
thread is allowed to modeset (as this thread requires to do an
initial/restoring modeset or a disabling modeset), other threads (the
user threads) are not allowed to modeset.

During driver loading/system resume after calling
intel_display_driver_enable_user_access() all threads are allowed to
modeset.

During driver unloading/system suspend/shutdown after calling
intel_display_driver_suspend_access() no threads are allowed to modeset
(as the HW got disabled and should stay in this state).

v2: Call intel_display_driver_suspend_access()/resume_access() only
    for HAS_DISPLAY(). (CI)
v3: (Jouni)
- Add commit log comments explaining how the permission of modeset
  changes during HW init/deinit wrt. to the current and other user
  processes.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104132335.2766434-1-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Suspend the framebuffer console earlier during system suspend

Suspend the FB console early during system suspend to prevent new FB
probe/modeset cycles interfering with the HW uninitialization steps in a
similar way as during driver shutdown as described in the previous
patch.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-7-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Suspend the framebuffer console during driver shutdown

Suspend the FB console during driver shutdown the same way this is done
during system resume. This should prevent any HPD event to trigger a new
FB probe/modeset cycle happening in parallel with the display HW
disable/uninitialize steps.

A preceding FB HPD event handling may be still pending, resulting in a
probe/modeset like the above, these will be prevented by a later change
in this patchset.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-6-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Disable intel HPD poll after DRM poll init/enable

The only purpose of intel_hpd_poll_disable() during driver loading and
system resume - at which point polling should be disabled anyway, except
for connectors in an IRQ storm, for which the polling will stay enabled -
is to force-detect all the connectors. However this detection in
i915_hpd_poll_init_work() depends on drm.mode_config.poll_enabled, which
will get set in drm_kms_helper_poll_init(), possibly after
i915_hpd_poll_init_work() is scheduled. Hence the initial detection of
connectors during driver loading may not happen.

Fix the above by moving intel_hpd_poll_disable() after
i915_hpd_poll_init_work(), the proper place anyway for doing the above
detection after all the HW initialization steps are complete. Change the
order the same way during system resume as well. The above race
condition shouldn't matter here - as drm.mode_config.poll_enabled will
be set - but the detection should happen here as well after the HW init
steps are done.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-5-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move audio deinit after disabling polling

Deinitialize audio during driver unload after disabling polling. This is
in preparation to do all the display HW init/deinit steps at a point
where no HPD IRQ or polling initiated connector detection or modeset can
change the HW state. This may still happen here via an HPD IRQ ->
hotplug detection work or a connector sysfs (state/detect) access, but
these will be prevented by later changes in this patchset.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-4-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Keep the connector polled state disabled after storm

If an HPD IRQ storm is detected on a connector during driver loading or
system suspend/resume - disabling the IRQ and switching to polling - the
polling may get disabled too early - before the intended 2 minute
HPD_STORM_REENABLE_DELAY - with the HPD IRQ staying disabled for this
duration. One such sequence is:

Thread#1                                   Thread#2
intel_display_driver_probe()->
  intel_hpd_init()->
    (HPD IRQ gets enabled)
  .                                        intel_hpd_irq_handler()->
  .                                          intel_hpd_irq_storm_detect()
  .                                            intel_hpd_irq_setup()->
  .                                              (HPD IRQ gets disabled)
  .                                         queue_delayed_work(hotplug.hotplug_work)
  .                                         ...
  .                                         i915_hotplug_work_func()->
  .                                           intel_hpd_irq_storm_switch_to_polling()->
  .                                             (polling enabled)
  .
  intel_hpd_poll_disable()->
    queue_work(hotplug.poll_init_work)
  ...
  i915_hpd_poll_init_work()->
    (polling gets disabled,
     HPD IRQ is still disabled)
  ...

  (Connector is neither polled or
   detected via HPD IRQs for 2 minutes)

  intel_hpd_irq_storm_reenable_work()->
    (HPD IRQ gets enabled)

To avoid the above 2 minute state without either polling or enabled HPD
IRQ, leave the connector's polling mode unchanged in
i915_hpd_poll_init_work() if its HPD IRQ got disabled after an IRQ storm
indicated by the connector's HPD_DISABLED pin state.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-3-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: Init DRM connector polled field early

After an HPD IRQ storm on a connector intel_hpd_irq_storm_detect() will
set the connector's HPD pin state to HPD_MARK_DISABLED and the IRQ gets
disabled. Subsequently intel_hpd_irq_storm_switch_to_polling() will
enable polling for these connectors, setting the pin state to
HPD_DISABLED, but only if the connector's base.polled field is set to
DRM_CONNECTOR_POLL_HPD. intel_hpd_irq_storm_reenable_work() will
reenable the IRQ - after 2 minutes -  if the pin state is HPD_DISABLED.

The connectors will be created with their base.polled field set to 0,
which gets initialized only later in i915_hpd_poll_init_work() (using
intel_connector::polled). If a storm is detected on a connector after
it's created and IRQs are enabled on it - by intel_hpd_init() - and
before its bease.polled field is initialized in the above work, the
connector's HPD pin will stay in the HPD_MARK_DISABLED state - leaving
the IRQ disabled indefinitely - and polling will not get enabled on it as
intended.

I can't see a reason for initializing base.polled in a delayed manner,
so do this already when creating the connector, to prevent the above
race condition.

Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-2-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915/display: Use helper to select C20 MPLLA/B

We used to select between MPLLA/B with the following

state->tx[0] & C20_PHY_USE_MPLLB

Since this is used a few places within C20 PLL setting,
let's introduce a helper function to clean up the code
a bit.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105112243.224199-1-mika.kahola@intel.com

drm/amd/display: Allow z8/z10 from driver

Copy StutterPeriod from DML2 into DML1 StutterPeriod parameter.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix bandwidth validation failure on DCN 2.1

IGT `amdgpu/amd_color/crtc-lut-accuracy` fails right at the beginning of
the test execution, during atomic check, because DC rejects the
bandwidth state for a fb sizing 64x64. The test was previously working
with the deprecated dc_commit_state(). Now using
dc_validate_with_context() approach, the atomic check needs to perform a
full state validation. Therefore, set fast_validation to false in the
dc_validate_global_state call for atomic check.

Cc: stable@vger.kernel.org
Fixes: b8272241ff9d ("drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well

These chips needs the same fix.  This was previously not seen
on then since the AGP aperture expanded the system aperture,
but this showed up again when AGP was disabled.

Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm

Other environments don't like the unary minus operator on
an unsigned value.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix recent checkpatch errors in amdgpu_dm

 - Use tabs, not spaces.
 - Brace and parentheses placement

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"

That commit causes NULL pointer dereferences in dmesgs when
running applications using ROCm, including clinfo, blender,
and PyTorch, since v6.6.1. Revert it to fix blender again.

This reverts commit 96c211f1f9ef82183493f4ceed4e347b52849149.

Closes: https://github.com/ROCm/ROCm/issues/2596
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2991
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Kaibo Ma <ent3rm4n@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()

gcc prints a warning about a possible array overflow for a couple of
callers of dp_decide_lane_settings() after commit 1b56c90018f0 ("Makefile:
Enable -Wstringop-overflow globally"):

drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c: In function 'dp_perform_fixed_vs_pe_training_sequence_legacy':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c:426:25: error: 'dp_decide_lane_settings' accessing 4 bytes in a region of size 1 [-Werror=stringop-overflow=]
  426 |                         dp_decide_lane_settings(lt_settings, dpcd_lane_adjust,
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  427 |                                         lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
      |                                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c:426:25: note: referencing argument 4 of type 'union dpcd_training_lane[4]'

I'm not entirely sure what caused this, but changing the prototype to expect
a pointer instead of an array avoids the warnings.

Fixes: 7727e7b60f82 ("drm/amd/display: Improve robustness of FIXED_VS link training at DP1 rates")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix power_helpers.c codestyle

Place define macro expression inside () in power_helpers.c file

Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hdcp_log.h codestyle

Place HDCP_EVENT_TRACE(hdcp, event) macro content inside do while loop
to avoid if-else issues in hdcp_log.h file

v2: fix up build (Alex)

Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hdcp2_execution.c codestyle

Remove braces for single statement if expressions and change comparison
order for hdcp2_execution.c file

Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hdcp_psp.h codestyle

Fix identation inside enum and place expressions in define macros inside
() for hdcp_psp.h file

Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>