staging: rtl8723bs: remove unused structures

Building this with 'make W=1' produces a couple of warnings:

rtl8723bs/include/ieee80211.h:730:1: warning: alignment 1 of 'struct ieee80211_assoc_request_frame' is less than 2 [-Wpacked-not-aligned]
rtl8723bs/include/ieee80211.h:737:1: warning: alignment 1 of 'struct ieee80211_assoc_response_frame' is less than 2 [-Wpacked-not-aligned]

The warnings are in dead code, so just remove the bits that
are obviously broken like this.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210204162956.3276523-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix pointer declaration style

Fix some pointer declarations where '*' is not adjacent to
data name.
This fixes checkpatch.pl error: "POINTER_LOCATION: "foo * bar"
should be "foo *bar""

Signed-off-by: Ayush <ayush@disroot.org>
Link: https://lore.kernel.org/r/20210204211750.102129-1-ayush@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge/qlge_main: Use min_t instead of min

Use min_t instead of min function in qlge/qlge_main.c
Fixes following checkpatch.pl warning:
WARNING: min() should probably be min_t(int, MAX_CPUS, num_online_cpus())

Signed-off-by: Amey Narkhede <ameynarkhede02@gmail.com>
Link: https://lore.kernel.org/r/20210205092433.4131-1-ameynarkhede02@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wimax: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-14-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-13-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-12-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-11-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-10-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-9-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-8-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-7-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-6-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-5-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-4-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-3-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-2-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table

The Edimax EW-7811UN V2 uses an RTL8188EU chipset and works with this
driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210204085217.9743-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix rtw_cfg80211_monitor_if_xmit_entry's return value

A netdev xmit function should return NETDEV_TX_OK or NETDEV_TX_BUSY.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210131183920.8514-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: fix read of an uninitialized pointer

Currently the pointer 'reporter' is not being initialized and is
being read in a netdev_warn message.  The pointer is not used
and is redundant, fix this by removing it and replacing the reference
to it with priv->reporter instead.

Fixes: 1053c27804df ("staging: qlge: coredump via devlink health reporter")
Reviewed-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Uninitialized pointer read")
Link: https://lore.kernel.org/r/20210203133834.22388-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: sound: use non-safe list iteration

This patch replaces the safe list iteration function with the
non-safe one, as no list element is being deleted.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612265890-18246-3-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: sound: add sanity check for function argument

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u/ieee80211: fix switch case indentation

Make switch and case to be at the same indent. This fixes the
checkpatch error "switch and case should be at the same indent".

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210131131226.16917-1-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: update copyright notes

At PMIC subsystem, C89 comments are preferred over C99.
While here, also update the copyrights of the header file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5a86478c8ccb93d3105485b5f16e20e9c12e2196.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: document registers

Make it clearer about how the IRQ registers are filled by adding
a table with them, with two macros used to calculate the mask
register.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/10f52ec0a8346fb883245344886c44714c859cd1.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code

- Use BIT() and GENMASK();
- Remove duplicated mask definitions;
- Simplify the code under IRQ handler;
- Add a few extra blank lines to make easier to see
  spin_lock/spin_unlock;
- Remove debug code;
- Fix a few minor coding style issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f9fcb184e7cbe8701298085df76d5d9fd285b2c5.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code

The conversion to regmap introduced a regression at the code
which reads from the IRQ register. Address that.

Fixes: fb02e3ebfb2d ("staging: hikey9xx: spmi driver: convert to regmap")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2eae710c333a8ee6f9e0a086c84115bc90a782ca.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: cleanup header file

Remove the IRQ list from the header, as this is used only
inside the driver itself. Also, get rid of two unused
defines.

The net result is that only struct hi6421_spmi_pmic remains
on it, as this is used by the regulator driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/138c3a11e4de0ebabdf27932957852136c2f7510.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code

Cleanup the error handling code, making the messages more
consistent and removing an uneeded call to free_irq().

While here, also remove debug messages and make the
error messages more consistent.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/651b4053599b9f25efecac3b1d4ce6abce0bd097.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: rename some vars

- When referring to regmap, rename map to regmap
- inside hi6421-spmi-pmic, call private data struct as
  ddata.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d23592b11ac606e3b9a3ff95a754cb75921e60aa.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: use some regmap helpers

Now that the driver was ported to use regmap, let's use
some help functions in order to simplify the code a little
bit.

Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bdd7988fb9bf5d3ebee03724cf73cc04d9bc47b.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: spmi driver: convert to regmap

Instead of doing its own SPMI I/O implementation, use the
already-existing regmap one.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7084885f3007ca5daf0d5bc85d038e26ee82dc0d.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c

Also use KBUILD_MODNAME for module name.

This driver is only used by RALINK MIPS MT7621 SoCs. Tested by building
against that target using OpenWrt with Linux 5.10.10.

Fixes the following error:
error: the following would cause module name conflict:
  drivers/dma/mediatek/mtk-hsdma.ko
  drivers/staging/mt7621-dma/mtk-hsdma.ko

Cc: stable@vger.kernel.org
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Link: https://lore.kernel.org/r/20210130034507.2115280-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge/qlge_ethtool.c: Switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

This silences the related checkpatch warnings from:
5dbdb2d87c29 ("checkpatch: prefer strscpy to strlcpy")

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210130044828.121248-1-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: replace enum WIFI_STATUS_CODE with native kernel definitions

Driver and kernel definitions are equal.
Avoid code duplication, improve readability.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Link: https://lore.kernel.org/r/20210131080618.25184-1-insafonov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8712: remove unused enum WIFI_STATUS_CODE

Improve readability.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Link: https://lore.kernel.org/r/20210131080912.25264-1-insafonov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wimax/i2400m: fix pointer declaration style

Fix a couple of pointer declarations where the pointer qualifier '*'
is not attached to the variable name. This fixes the checkpatch
error: "foo * bar" should be "foo *bar".

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210130174454.11810-1-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: add documentation for debugging qlge

Instructions and examples on kernel data structures dumping and
coredump.

Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-9-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land

The debugging code in the following ifdef land
 - QL_ALL_DUMP
 - QL_REG_DUMP
 - QL_DEV_DUMP
 - QL_CB_DUMP
 - QL_IB_DUMP
 - QL_OB_DUMP

becomes unnecessary because,
 - Device status and general registers can be obtained by ethtool.
 - Coredump can be done via devlink health reporter.
 - Structure related to the hardware (struct ql_adapter) can be obtained
   by crash or drgn.

Link: https://lkml.org/lkml/2020/6/30/19
Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-8-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: remove mpi_core_to_log which sends coredump to the kernel ring buffer

devlink health could be used to get coredump. No need to send so much
data to the kernel ring buffer.

Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-7-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: support force_coredump option for devlink health dump

With force_coredump module parameter set, devlink health dump will
reset the MPI RISC first which takes 5 secs to be finished.

Note that only NIC function that owns the firmware can do the
force_dumping. Otherwise devlink will receive an EPERM error.

Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-6-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: coredump via devlink health reporter

    $ devlink health dump show DEVICE reporter coredump -p -j
    {
        "Core Registers": {
            "segment": 1,
            "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
        },
        "Test Logic Regs": {
            "segment": 2,
            "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
        },
        "RMII Registers": {
            "segment": 3,
            "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
        },
        ...
        "Sem Registers": {
            "segment": 50,
            "values": [ 0,0,0,0 ]
        }
    }

Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-5-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: re-write qlge_init_device

Stop calling ql_release_all in qlge_init_device and free things one step
at a time.

struct qlge_adapter *qdev is now a private structure of struct devlink
and memset is not necessary.

Link: https://lore.kernel.org/patchwork/patch/1321092/#1516928
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-4-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: Initialize devlink health dump framework

Initialize devlink health dump framework for the qlge driver so the
coredump could be done via devlink.

struct qlge_adapter is now used as the private data structure of
struct devlink so it could exist independently of struct net_device
and devlink reload could be supported in the future. The private data
of PCIe driver now points to qlge_adapter.

Since devlink_alloc will zero out struct qlge_adapter, memset in
qlge_init_device is not necessary.

Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-3-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: use qlge_* prefix to avoid namespace clashes with other qlogic drivers

To avoid namespace clashes with other qlogic drivers and also for the
sake of naming consistency, use the "qlge_" prefix as suggested in
drivers/staging/qlge/TODO,
 - For existing ql_ prefix,
   sed -i "s/ql_/qlge_/g" *.{c,h}
 - for structs not having a prefix
   1. get a list of structs
      grep "struct.*{" qlge.
   2. add qlge_ for each struct, e.g.,
      sed -i "s/ib_ae_iocb_rsp/qlge_ib_ae_iocb_rsp/g" *.{c,h}

Link: https://lore.kernel.org/patchwork/patch/1318503/#1516131
Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-2-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc4_services: bcm2835-audio: Add SNDRV_PCM_INFO_BATCH flag

Playing audio with PulseAudio and the bcm2835-pcm driver results
in distorted sound. Timer-based scheduling does not properly work
with bcm2835-pcm since configuring PulseAudio with tsched=0
avoids this problem.

Setting the SNDRV_PCM_INFO_BATCH flag prevents PulseAudio to use
timer-based scheduling by default. Settings this flag makes audio
works out of the box.

Based on: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7f2430cda819a9ecb1df5a0f3ef4f1c20db3f811

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20210127174348.10192-1-me@dylanvanassche.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: net: wimax: i2400m: fw: remove redundant initialization of variable result

The variable result is being initialized with a value that is never
read and it is being updated later with a new value.  The initialization
is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210128173703.645328-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: simplify includes

There are several uneeded includes. Remove them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/50087bb41fc262d6930aeda0583546cf9d597b87.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421-spmi-pmic: update copyright

Remove the GPL boilerplate, as SPDX tag already points to the
license terms and add a new copyright for Huawei.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/18b36d01c04519d84912140b6c40c1bd1f75a3a8.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hisilicon, hi6421-spmi-pmic.yaml: cleanup a warning

There's no additionalProperties field at the yaml file, causing
a warning when checking it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1920935fc7320f8d03ed3c89625fa865adcf4390.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: fix get_optimum_mode

During the driver refactor, a regression broke the logic inside
hi6421_spmi_regulator_get_optimum_mode(). Basically, if a LDO
has eco_uA == 0, it doesn't support economic mode. So, it should
return REGULATOR_MODE_NORMAL.

If economic mode is supported, it can return either
REGULATOR_MODE_IDLE or REGULATOR_MODE_NORMAL, depending on the
load current.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f087981eb695eaab8c301c42977a4aa884affbbf.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: cleanup comments

Remove obvious comments and fix the comment for the
HI6421V600_LDO() macro.

While on it, use kernel-doc notation for HI6421V600_LDO(),
as kernel-doc can check if the arguments match its
description.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d5e6dbdee5f7e143300249251ddbe09fdf64e669.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: fix delay logic

The original driver, which can be seen at
commit 42f24d9d446a ("staging: regulator: add a regulator driver for HiSilicon 6421v600 SPMI PMIC")
had a complex logic to ensure that there won't be multiple power
enable/disable commands running at the same time. At the original
logic, it were ensured that:

- a next power up/down would wait for at least the on/off period;
- an extra delay would be granted. It turns that such extra delay
  has a value of zero, but it was relying on gettimeofday()
  call, which can take some time.

This was later simplified, but there are still some possible
issues. In order to avoid that, let's simply add a delay
to wait for the power up line to stabilize after powering up
a device.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6733dac9813ba6688def404142cb7b964accf758.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: update copyright

Remove the GPL boilerplate, as SPDX tag already points to the
license terms and add a new copyright for Huawei.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/80d2d21c3d327e3acc89d016b20bd2d93e9c6f65.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: do some cleanups

In preparation for de-staging, do some cleanups:

- Return error codes from hi6421_spmi_pmic_rmw();
- Remove a debug message;
- Change the module description;
- a few minor coding style adjustments.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0bae0c05d997e4a5a0b3b86a65f3370dafb14596.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: get rid of an static data

Move it to be inside the private data struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ff8b6852c788fd476743eb4ce556e4a97f4b928e.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: cleanup debug msgs

While those were useful during port time from downstream
version, let's get rid of them for good, as it is possible to
get about the same things by enabling regulator debugging code.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/be1b704fcba9f1dd0559174835f1e5390df1cf94.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: move LDO config from DT

Instead of storing regulator LDO configuration inside the DT, move
it to be part of the driver itself.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/46b16fdf4ad924b5d9a06139cd7ff2dae28d5a6c.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hi6421v600-regulator: do some cleanups

Use C99 comments at the beginning of the file and remove
uneeded includes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/cc0017d65b49ceb7df0357cec3a2dc1c4c2a118d.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hisilicon, hi6421-spmi-pmic.yaml: simplify props

As all regulator-specific properties got moved to be part of the
driver, remove them from the DT spec.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2c2d09e332afa6539e5e80d69b23622941fd3d3e.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: hisilicon, hisi-spmi-controller.yaml fix bindings

Fix a few warnings produced by make dt_binding_check.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/fca7260e7c61f073ae376ab23f58856ba5a87a7a.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: phy-hi3670-usb3.yaml: add a blank line

Add a blank line after maintainers field.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2bd13d3e141fd8826a8e791e5c65e877c6233966.1611052729.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: phy-hi3670-usb3: hi3670_is_abbclk_seleted() returns bool

There are a few issues on this function:

1. Instead of using 1/0 for true/false, change the type to boolean;
2. there's a typo there:
seleted -> selected
3. It's logic is reversed.

Address them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a579004cfa0cb3cca55c2124a8574a7aeb4eacc3.1611052729.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: phy-hi3670-usb3: adjust retry logic

Instead of running a loop up to 100k times, add a small
delay inside it, running it up to 10 times, waiting up
to 100-200 us.

It should be noticed that I don't have the datasheet for
this PHY. So, not sure if this time will cover all
situations.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b653d7d6073de176598a5026c41b1a845f360c9e.1611052729.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: phy-hi3670-usb3: use bitfield macros

Cleanup the bitfield macros by using FIELD_PREP() and GENMASK().

While here, place all hexadecimal values in lowercase.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ac56b97a99ec278d2f40e07e7e07adef36d45d09.1611052729.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: Support falling edge triggers

The interrupt support for Advantech PCI-1730 currrently supports only
rising edge inputs for the trigger sources.  Each of four interrupt
sources (each with its own Comedi subdevice) can be set to trigger on
either a rising edge or a falling edge.  Add support for choosing the
edge during set-up of the asynchronous command for the subdevice, using
the `CR_INVERT` bit of `scan_begin_arg` to indicate falling edge when
set, or rising edge when clear.  Also allow the `CR_EDGE` bit to be set,
but ignore it.  All other bits of `scan_begin_arg` must be zero.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118144359.378730-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: Add interrupt handling for PCI-1730

On the Advantech PCI-1730, four digital inputs (DI0, DI1, IDI0 and IDI1)
can be used as external interrupt sources.  Each input can be programmed
to latch an interrupt bit on either a rising edge or a falling edge (but
not both).

Add a new Comedi subdevice for each interrupt source, supporting the
asynchronous command interface.  Subdevices 5, 6, 7 and 8 are for
interrupt sources DI0, DI1, IDI0 and IDI1.  They each write the state of
16 digital inputs to the subdevice's data buffer each time the
corresponding interrupt occurs.  (For DI0 and DI1, use the 16
non-isolated digital inputs.  For IDI0 and IDI1, use the 16 isolated
digital inputs.)

Currently, only rising edge triggers are supported.  Support could be
added for the PCI-1733 and PCI-1736.

Signed-off-by: Bernd Harries <bha@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118144359.378730-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci7x3x: Add interrupt handling for PCI-7230

On the ADLink PCI-7230, digital input channels 0 and 1 can be used as
external interrupt sources.  A rising edge on each input latches a
corresponding local interrupt input of the PCI interface chip.  Writing
a "clear IRQ" register clears both latches.

Add a new Comedi subdevice for each interrupt source, supporting the
asynchronous command interface.  This writes the state of the 16 digital
inputs to the subdevice's data buffer each time the corresponding
interrupt occurs.

This could be adapted to support the PCI-7233, PCI-7432 and PCI-7433
boards too.  They all have two interrupt sources, although for PCI-7233
each interrupt source is triggered by a change of state of 16 digital
inputs (0-15 and 16-31).  The "clear IRQ" register is at a different
offset for some boards.

Signed-off-by: Bernd Harries <bha@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118141829.376505-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-dts: remove obsolete switch node

This was for OpenWrt's swconfig driver, which never made it upstream,
and was also superseded by MT7530 DSA driver.

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Link: https://lore.kernel.org/r/20210108025155.31556-1-dqfext@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules

The custom regulatory ruleset in the rtl8723bs driver lists an incorrect
number of rules: one too many. This results in an out-of-bounds access,
as detected by KASAN. This was possible thanks to the newly added support
for KASAN on ARMv7.

Fix this by filling in the correct number of rules given.

KASAN report:

==================================================================
BUG: KASAN: global-out-of-bounds in cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211]
Read of size 4 at addr bf20c254 by task ip/971

CPU: 2 PID: 971 Comm: ip Tainted: G         C        5.11.0-rc2-00020-gf7fe528a7ebe #1
Hardware name: Allwinner sun8i Family
[<c0113338>] (unwind_backtrace) from [<c010e8a4>] (show_stack+0x10/0x14)
[<c010e8a4>] (show_stack) from [<c0e0f868>] (dump_stack+0x9c/0xb4)
[<c0e0f868>] (dump_stack) from [<c0388284>] (print_address_description.constprop.2+0x1dc/0x2dc)
[<c0388284>] (print_address_description.constprop.2) from [<c03885cc>] (kasan_report+0x1a8/0x1c4)
[<c03885cc>] (kasan_report) from [<bf00a354>] (cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211])
[<bf00a354>] (cfg80211_does_bw_fit_range [cfg80211]) from [<bf00b41c>] (freq_reg_info_regd.part.6+0x108/0x124 [>
[<bf00b41c>] (freq_reg_info_regd.part.6 [cfg80211]) from [<bf00df00>] (handle_channel_custom.constprop.12+0x48/>
[<bf00df00>] (handle_channel_custom.constprop.12 [cfg80211]) from [<bf00e150>] (wiphy_apply_custom_regulatory+0>
[<bf00e150>] (wiphy_apply_custom_regulatory [cfg80211]) from [<bf1fb9e8>] (rtw_regd_init+0x60/0x70 [r8723bs])
[<bf1fb9e8>] (rtw_regd_init [r8723bs]) from [<bf1ee5a8>] (rtw_cfg80211_init_wiphy+0x164/0x1e8 [r8723bs])
[<bf1ee5a8>] (rtw_cfg80211_init_wiphy [r8723bs]) from [<bf1f8d50>] (_netdev_open+0xe4/0x28c [r8723bs])
[<bf1f8d50>] (_netdev_open [r8723bs]) from [<bf1f8f58>] (netdev_open+0x60/0x88 [r8723bs])
[<bf1f8f58>] (netdev_open [r8723bs]) from [<c0bb3730>] (__dev_open+0x178/0x220)
[<c0bb3730>] (__dev_open) from [<c0bb3cdc>] (__dev_change_flags+0x258/0x2c4)
[<c0bb3cdc>] (__dev_change_flags) from [<c0bb3d88>] (dev_change_flags+0x40/0x80)
[<c0bb3d88>] (dev_change_flags) from [<c0bc86fc>] (do_setlink+0x538/0x1160)
[<c0bc86fc>] (do_setlink) from [<c0bcf9e8>] (__rtnl_newlink+0x65c/0xad8)
[<c0bcf9e8>] (__rtnl_newlink) from [<c0bcfeb0>] (rtnl_newlink+0x4c/0x6c)
[<c0bcfeb0>] (rtnl_newlink) from [<c0bc67c8>] (rtnetlink_rcv_msg+0x1f8/0x454)
[<c0bc67c8>] (rtnetlink_rcv_msg) from [<c0c330e4>] (netlink_rcv_skb+0xc4/0x1e0)
[<c0c330e4>] (netlink_rcv_skb) from [<c0c32478>] (netlink_unicast+0x2c8/0x3c4)
[<c0c32478>] (netlink_unicast) from [<c0c32894>] (netlink_sendmsg+0x320/0x5f0)
[<c0c32894>] (netlink_sendmsg) from [<c0b75eb0>] (____sys_sendmsg+0x320/0x3e0)
[<c0b75eb0>] (____sys_sendmsg) from [<c0b78394>] (___sys_sendmsg+0xe8/0x12c)
[<c0b78394>] (___sys_sendmsg) from [<c0b78a50>] (__sys_sendmsg+0xc0/0x120)
[<c0b78a50>] (__sys_sendmsg) from [<c0100060>] (ret_fast_syscall+0x0/0x58)
Exception stack(0xc5693fa8 to 0xc5693ff0)
3fa0:                   00000074 c7a39800 00000003 b6cee648 00000000 00000000
3fc0: 00000074 c7a39800 00000001 00000128 78d18349 00000000 b6ceeda0 004f7cb0
3fe0: 00000128 b6cee5e8 aeca151f aec1d746

The buggy address belongs to the variable:
 rtw_drv_halt+0xf908/0x6b4 [r8723bs]

Memory state around the buggy address:
 bf20c100: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
 bf20c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>bf20c200: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
                                         ^
 bf20c280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 bf20c300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210108141401.31741-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: use %s and __func__

Change function's name to %s and __func__ to fix checkpatch.pl errors.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20210124144328.121688-1-puranjay12@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix rtw_xmit_entry's return value

A netdev xmit function should return NETDEV_TX_OK or NETDEV_TX_BUSY.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210122165749.29467-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.11-rc5 into staging-next

We need the IIO/Staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: atomisp: Fix size_t format specifier in hmm_alloc() debug statemenet

Fix this build warning on 32-bit:

  drivers/staging/media/atomisp/pci/hmm/hmm.c: In function ‘hmm_alloc’:
  drivers/staging/media/atomisp/pci/hmm/hmm.c:272:3: warning: format ‘%ld’ \
     expects argument of type ‘long int’, but argument 6 has type ‘size_t {aka unsigned int}’ [-Wformat=]
     "%s: pages: 0x%08x (%ld bytes), type: %d from highmem %d, user ptr %p, cached %d\n",
     ^

Fixes: 03884c93560c ("media: atomisp: add debug for hmm alloc")
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20201126181150.10576-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.11-rc5

Merge tag 'sh-for-5.11' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
 "Cleanup and warning fixes"

* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
  sh/intc: Restore devm_ioremap() alignment
  sh: mach-sh03: remove duplicate include
  arch: sh: remove duplicate include
  sh: Drop ARCH_NR_GPIOS definition
  sh: Remove unused HAVE_COPY_THREAD_TLS macro
  sh: remove CONFIG_IDE from most defconfig
  sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
  sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
  arch/sh: hyphenate Non-Uniform in Kconfig prompt
  sh: dma: fix kconfig dependency for G2_DMA

Merge tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Still need a final cancelation fix that isn't quite done done,
  expected in the next day or two. That said, this contains:

   - Wakeup fix for IOPOLL requests

   - SQPOLL split close op handling fix

   - Ensure that any use of io_uring fd itself is marked as inflight

   - Short non-regular file read fix (Pavel)

   - Fix up bad false positive warning (Pavel)

   - SQPOLL fixes (Pavel)

   - In-flight removal fix (Pavel)"

* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  io_uring: account io_uring internal files as REQ_F_INFLIGHT
  io_uring: fix sleeping under spin in __io_clean_op
  io_uring: fix short read retries for non-reg files
  io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
  io_uring: fix skipping disabling sqo on exec
  io_uring: fix uring_flush in exit_files() warning
  io_uring: fix false positive sqo warning on flush
  io_uring: iopoll requests should also wake task ->in_idle state

Merge tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - fix a status code in nvmet (Chaitanya Kulkarni)
      - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
      - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
      - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
      - fix a double DMA unmap in nvme-pci

 - lightnvm error path leak fix (Pan)

 - MD pull request from Song:
      - Flush request fix (Xiao)

* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  lightnvm: fix memory leak when submit fails
  nvme-pci: fix error unwind in nvme_map_data
  nvme-pci: refactor nvme_unmap_data
  md: Set prev_flush_start and flush_bio in an atomic way
  nvmet: set right status on error in id-ns handler
  nvme-pci: allow use of cmb on v1.4 controllers
  nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
  nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
  nvme: check the PRINFO bit before deciding the host buffer length

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
  memory-failure, and highmem), ubsan, proc, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: add a couple more files to the Clang/LLVM section
  proc_sysctl: fix oops caused by incorrect command parameters
  powerpc/mm/highmem: use __set_pte_at() for kmap_local()
  mips/mm/highmem: use set_pte() for kmap_local()
  mm/highmem: prepare for overriding set_pte_at()
  sparc/mm/highmem: flush cache and TLB
  mm: fix page reference leak in soft_offline_page()
  ubsan: disable unsigned-overflow check for i386
  kasan, mm: fix resetting page_alloc tags for HW_TAGS
  kasan, mm: fix conflicts with init_on_alloc/free
  kasan: fix HW_TAGS boot parameters
  kasan: fix incorrect arguments passing in kasan_add_zero_shadow
  kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
  mm: fix numa stats for thp migration
  mm: memcg: fix memcg file_dirty numa stat
  mm: memcg/slab: optimize objcg stock draining
  mm: fix initialization of struct page for holes in memory layout
  x86/setup: don't remove E820_TYPE_RAM for pfn 0

Merge tag 'char-misc-5.11-rc5' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Merge tag 'staging-5.11-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
 "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Merge tag 'tty-5.11-rc5' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Merge tag 'usb-5.11-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

MAINTAINERS: add a couple more files to the Clang/LLVM section

The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.

Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc_sysctl: fix oops caused by incorrect command parameters

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm/highmem: use __set_pte_at() for kmap_local()

The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU.  This got lost with the conversion
to the generic implementation.

Override the default map function.

Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips/mm/highmem: use set_pte() for kmap_local()

set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().

Use set_pte() like the original MIPS highmem implementation did.

Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/highmem: prepare for overriding set_pte_at()

The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().

Provide arch_kmap_local_set_pte() and default it to set_pte_at().

Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc/mm/highmem: flush cache and TLB

Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".

The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.

This patch (of 4):

The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.

Sparc requires cache flush before map/unmap and tlb flush afterwards.

Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa97807 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix page reference leak in soft_offline_page()

The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.

Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.

When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.

Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: disable unsigned-overflow check for i386

Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:

  crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
  static void blake2b_compress(struct blake2b_state *S,

  crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
  static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,

  lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])

  lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])

Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.

The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.

Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac549f38 ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, mm: fix resetting page_alloc tags for HW_TAGS

A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.

That commit did reset page tags before the metadata access, but didn't
restore them after.  As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.

Fix this by recovering the tag after the metadata access.

Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, mm: fix conflicts with init_on_alloc/free

A few places where SLUB accesses object's data or metadata were missed
in a previous patch.  This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.

Fix the false-positives by resetting pointer tags during these accesses.

(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
 into maybe_wipe_obj_freeptr.)

Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f67 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix HW_TAGS boot parameters

The initially proposed KASAN command line parameters are redundant.

This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead.  The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.

The full set of parameters with this change:

  kasan=off/on             - whether KASAN is enabled
  kasan.fault=report/panic - whether to only print a report or also panic
  kasan.stacktrace=off/on  - whether to collect alloc/free stack traces

Default values:

  kasan=on
  kasan.fault=report
  kasan.stacktrace=on  (if CONFIG_DEBUG_KERNEL=y)
  kasan.stacktrace=off (otherwise)

Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix incorrect arguments passing in kasan_add_zero_shadow

kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.

Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow

During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.

In the test case for kasan_remove_zero_shadow():

    shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000

    3-level page table:
      PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K

0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.

In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.

Fix by correcting the condition when next and addr are neither aligned.

Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'irq_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.

 - Fix to not lose IPIs on bcm2836.

 - Fix for a bogus marking of ITS devices as shared due to unitialized
   stack variable.

 - Clear a phantom interrupt on qcom-pdc to unblock suspend.

 - Small cleanups, warning and build fixes.

* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export irq_check_status_bit()
  irqchip/mips-cpu: Set IPI domain parent chip
  irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
  irqchip/loongson-liointc: Fix build warnings
  driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
  irqchip/irq-sl28cpld: Convert comma to semicolon
  genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()

Merge tag 'objtool_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull objtool fixes from Borislav Petkov:

 - Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

 - Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

 - Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree

Merge tag 'sched_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Correct the marking of kthreads which are supposed to run on a
   specific, single CPU vs such which are affine to only one CPU, mark
   per-cpu workqueue threads as such and make sure that marking
   "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.

 - A fix to not push away tasks on CPUs coming online.

 - Have workqueue CPU hotplug code use cpu_possible_mask when breaking
   affinity on CPU offlining so that pending workers can finish on newly
   arrived onlined CPUs too.

 - Dump tasks which haven't vacated a CPU which is currently being
   unplugged.

 - Register a special scale invariance callback which gets called on
   resume from RAM to read out APERF/MPERF after resume and thus make
   the schedutil scaling governor more precise.

* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Relax the set_cpus_allowed_ptr() semantics
  sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
  sched: Prepare to use balance_push in ttwu()
  workqueue: Restrict affinity change to rescuer
  workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
  kthread: Extract KTHREAD_IS_PER_CPU
  sched: Don't run cpu-online with balance_push() enabled
  workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
  sched/core: Print out straggler tasks in sched_cpu_dying()
  x86: PM: Register syscore_ops for scale invariance