Jeremy Kerr [Mon, 19 Feb 2024 09:51:46 +0000 (17:51 +0800)]
net: mctp: avoid confusion over local/peer dest/source addresses
We have a double-swap of local and peer addresses in
mctp_alloc_local_tag; the arguments in both call sites are swapped, but
there is also a swap in the implementation of alloc_local_tag. This is
opaque because we're using source/dest address references, which don't
match the local/peer semantics.
Avoid this confusion by naming the arguments as 'local' and 'peer', and
remove the double swap. The calling order now matches mctp_key_alloc.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Samuel Thibault [Sat, 17 Feb 2024 21:14:25 +0000 (22:14 +0100)]
PPPoL2TP: Add more code snippets
The existing documentation was not telling that one has to create a PPP
channel and a PPP interface to get PPPoL2TP data offloading working.
Also, tunnel switching was not mentioned, so that people were thinking
it was not supported, while it actually is.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Tom Parkin <tparkin@katalix.com>
Link: https://lore.kernel.org/r/20240217211425.qj576u3jmaa6yidf@begin
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Feb 2024 11:00:01 +0000 (12:00 +0100)]
udp: add local "peek offset enabled" flag
We want to re-organize the struct sock layout. The sk_peek_off
field location is problematic, as most protocols want it in the
RX read area, while UDP wants it on a cacheline different from
sk_receive_queue.
Create a local (inside udp_sock) copy of the 'peek offset is enabled'
flag and place it inside the same cacheline of reader_queue.
Check such flag before reading sk_peek_off. This will save potential
false sharing and cache misses in the fast-path.
Tested under UDP flood with small packets. The struct sock layout
update causes a 4% performance drop, and this patch restores completely
the original tput.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/67ab679c15fbf49fa05b3ffe05d91c47ab84f147.1708426665.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 21 Feb 2024 22:57:03 +0000 (14:57 -0800)]
Merge branch 'net-phy-marvell-88q2xxx-add-driver-for-the-marvell-88q2220-phy'
Dimitri Fedrau says:
====================
net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
====================
Link: https://lore.kernel.org/r/20240218075753.18067-1-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:51 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: move interrupt configuration
Move interrupt configuration from mv88q222x_revb0_config_init to
mv88q2xxx_config_init. Same register and bits are used for the 88q2xxx
devices.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-15-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:50 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: remove duplicated assignment of pma_extable
Remove assignment of phydev->pma_extable in mv88q222x_revb0_config_init.
It is already done in mv88q2xxx_config_init, just call
mv88q2xxx_config_init.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-14-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:49 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: cleanup mv88q2xxx_config_init
mv88q2xxx_config_init calls genphy_c45_read_pma which is done by
mv88q2xxx_read_status, it calls also mv88q2xxx_config_aneg which is
also called by the PHY state machine. Let the PHY state machine handle
the phydriver ops in their intendend way.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-13-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:48 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: switch to mv88q2xxx_config_aneg
Switch to mv88q2xxx_config_aneg for Marvell 88Q2220 devices and remove
the mv88q222x_config_aneg function which is basically a copy of the
mv88q2xxx_config_aneg function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-12-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:47 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: make mv88q2xxx_config_aneg generic
Marvell 88Q2xxx devices follow the same scheme, after configuration they
need a soft reset. Soft resets differ between devices, so we use the
.soft_reset callback instead of creating .config_aneg callbacks for each
device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-11-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:46 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: add cable test support
Add cable test support for Marvell 88Q222x devices. Reported distance
granularity is 1m.
1m cable, open:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Open Circuit
Pair A, fault length: 1.00m
1m cable, shorted:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Short within Pair
Pair A, fault length: 1.00m
6m cable, open:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Open Circuit
Pair A, fault length: 6.00m
6m cable, shorted:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Short within Pair
Pair A, fault length: 6.00m
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240218075753.18067-10-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:45 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: add support for temperature sensor
Marvell 88q2xxx devices have an inbuilt temperature sensor. Add hwmon
support for this sensor.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-9-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:44 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: add suspend / resume ops
Add suspend/resume ops for Marvell 88Q2xxx devices.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-8-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:43 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: add interrupt support for link detection
Added .config_intr and .handle_interrupt callbacks. Whenever the link
goes up or down an interrupt will be triggered. Interrupts are configured
separately for 100/1000BASET1.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-7-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:42 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
Add a driver for the Marvell 88Q2220. This driver allows to detect the
link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
master and slave mode. Autonegotiation is supported.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-6-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:41 +0000 (08:57 +0100)]
net: phy: marvell-88q2xxx: fix typos
Rename mv88q2xxxx_get_sqi to mv88q2xxx_get_sqi and
mv88q2xxxx_get_sqi_max to mv88q2xxx_get_sqi_max.
Fix linebreaks and use everywhere hexadecimal numbers written with
lowercase letters instead of mixing it up.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-5-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:40 +0000 (08:57 +0100)]
net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to
enable detection.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-4-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:39 +0000 (08:57 +0100)]
net: phy: Support 100/1000BT1 linkmode advertisements
Extend helper functions mii_t1_adv_m_mod_linkmode_t and
linkmode_adv_to_mii_t1_adv_m_t to support 100BT1 and 1000BT1 linkmode
advertisements.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-3-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Fedrau [Sun, 18 Feb 2024 07:57:38 +0000 (08:57 +0100)]
net: phy: Add BaseT1 auto-negotiation constants
Added constants for advertising 100BT1 and 1000BT1 in register BASE-T1
auto-negotiation advertisement register [31:16] (Register 7.515)
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-2-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Lakkaraju [Fri, 16 Feb 2024 05:44:35 +0000 (11:14 +0530)]
net: phy: mxl-gpy: fill in possible_interfaces for GPY21x chipset
Fill in the possible_interfaces member.
GPY21x phys support the SGMII and 2500base-X interfaces
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Link: https://lore.kernel.org/r/20240216054435.22380-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 21 Feb 2024 12:46:17 +0000 (12:46 +0000)]
Merge branch 'rework-genet-mdioclocking'
Florian Fainelli says:
====================
Rework GENET MDIO controller clocking
This patch series reworks the way that we manage the GENET MDIO
controller clocks around I/O accesses. During testing with a fully
modular build where bcmgenet, mdio-bcm-unimac, and the Broadcom PHY
driver (broadcom) are all loaded as modules, with no particular care
being taken to order them to mimize deferred probing the following bus
error was obtained:
[ 4.344831] printk: console [ttyS0] enabled
[ 4.351102]
840d000.serial: ttyS1 at MMIO 0x840d000 (irq = 29, base_baud =
5062500) is a Broadcom BCM7271 UART
[ 4.363110]
840e000.serial: ttyS2 at MMIO 0x840e000 (irq = 30, base_baud =
5062500) is a Broadcom BCM7271 UART
[ 4.387392] iproc-rng200
8402000.rng: hwrng registered
[ 4.398012] Consider using thermal netlink events interface
[ 4.403717] brcmstb_thermal
a581500.thermal: registered AVS TMON of-sensor driver
[ 4.440085] bcmgenet
8f00000.ethernet: GENET 5.0 EPHY: 0x0000
[ 4.482526] unimac-mdio unimac-mdio.0: Broadcom UniMAC MDIO bus
[ 4.514019] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.551304] SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
[ 4.551324] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted
6.1.53-0.1pre-g5a26d98e908c #2
[ 4.551330] Hardware name: BCM972180HB_V20 (DT)
[ 4.551336] Workqueue: events_unbound deferred_probe_work_func
[ 4.551363] pstate:
00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.551368] pc : el1_abort+0x2c/0x58
[ 4.551376] lr : el1_abort+0x20/0x58
[ 4.551379] sp :
ffffffc00a383960
[ 4.551380] x29:
ffffffc00a383960 x28:
ffffff80029fd780 x27:
0000000000000000
[ 4.551385] x26:
0000000000000000 x25:
ffffff8002839005 x24:
ffffffc00a1f9bd0
[ 4.551390] x23:
0000000040000005 x22:
ffffffc000a48084 x21:
ffffffc00a3dde14
[ 4.551394] x20:
0000000096000210 x19:
ffffffc00a3839a0 x18:
0000000000000579
[ 4.551399] x17:
0000000000000000 x16:
0000000100000000 x15:
ffffffc00a3838c0
[ 4.551403] x14:
000000000000000a x13:
6e69622f7273752f x12:
3a6e6962732f7273
[ 4.551408] x11:
752f3a6e69622f3a x10:
6e6962732f3d4854 x9 :
ffffffc0086466a8
[ 4.551412] x8 :
ffffff80049ee100 x7 :
ffffff8003231938 x6 :
0000000000000000
[ 4.551416] x5 :
0000002200000000 x4 :
ffffffc00a3839a0 x3 :
0000002000000000
[ 4.551420] x2 :
0000000000000025 x1 :
0000000096000210 x0 :
0000000000000000
[ 4.551429] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 4.551432] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted
6.1.53-0.1pre-g5a26d98e908c #2
[ 4.551435] Hardware name: BCM972180HB_V20 (DT)
[ 4.551437] Workqueue: events_unbound deferred_probe_work_func
[ 4.551443] Call trace:
[ 4.551445] dump_backtrace+0xe4/0x124
[ 4.551452] show_stack+0x1c/0x28
[ 4.551455] dump_stack_lvl+0x60/0x78
[ 4.551462] dump_stack+0x14/0x2c
[ 4.551467] panic+0x134/0x304
[ 4.551472] nmi_panic+0x50/0x70
[ 4.551480] arm64_serror_panic+0x70/0x7c
[ 4.551484] do_serror+0x2c/0x5c
[ 4.551487] el1h_64_error_handler+0x2c/0x40
[ 4.551491] el1h_64_error+0x64/0x68
[ 4.551496] el1_abort+0x2c/0x58
[ 4.551499] el1h_64_sync_handler+0x8c/0xb4
[ 4.551502] el1h_64_sync+0x64/0x68
[ 4.551505] unimac_mdio_readl.isra.0+0x4/0xc [mdio_bcm_unimac]
[ 4.551519] __mdiobus_read+0x2c/0x88
[ 4.551526] mdiobus_read+0x40/0x60
[ 4.551530] phy_read+0x18/0x20
[ 4.551534] bcm_phy_config_intr+0x20/0x84
[ 4.551537] phy_disable_interrupts+0x2c/0x3c
[ 4.551543] phy_probe+0x80/0x1b0
[ 4.551545] really_probe+0x1b8/0x390
[ 4.551550] __driver_probe_device+0x134/0x14c
[ 4.551554] driver_probe_device+0x40/0xf8
[ 4.551559] __device_attach_driver+0x108/0x11c
[ 4.551563] bus_for_each_drv+0xa4/0xcc
[ 4.551567] __device_attach+0xdc/0x190
[ 4.551571] device_initial_probe+0x18/0x20
[ 4.551575] bus_probe_device+0x34/0x94
[ 4.551579] deferred_probe_work_func+0xd4/0xe8
[ 4.551583] process_one_work+0x1ac/0x25c
[ 4.551590] worker_thread+0x1f4/0x260
[ 4.551595] kthread+0xc0/0xd0
[ 4.551600] ret_from_fork+0x10/0x20
[ 4.551608] SMP: stopping secondary CPUs
[ 4.551617] Kernel Offset: disabled
[ 4.551619] CPU features: 0x00000,
00c00080,
0000420b
[ 4.551622] Memory Limit: none
[ 4.833838] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
The issue here is that we managed to probe the GENET controller, the
mdio-bcm-unimac MDIO controller, but the PHY was still being held in a
probe deferral state because it depended upon a GPIO controller provider
not loaded yet. As soon as that provider is loaded however, the PHY
continues to probe, tries to disable the interrupts, and this causes a
MDIO transaction. That MDIO transaction requires I/O register accesses
within the GENET's larger block, and since its clocks are turned off,
the CPU gets a bus error signaled as a System Error.
The patch series takes the simplest approach of keeping the clocks
enabled just for the duration of the I/O accesses. This is also
beneficial to other drivers like bcmasp2 which make use of the same MDIO
controller driver.
Changes in v2:
- added missing ret assignment in the if (IS_ERR(priv->clk)) branch
- added Jacob's R-by tags
- corrected the commit ID being reverted in patch #3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 19 Feb 2024 20:40:53 +0000 (12:40 -0800)]
Revert "net: bcmgenet: Ensure MDIO unregistration has clocks enabled"
This reverts commit
1b5ea7ffb7a3bdfffb4b7f40ce0d20a3372ee405 ("net:
bcmgenet: Ensure MDIO unregistration has clocks enabled"). This is no
longer necessary now that the MDIO bus controller has a clock that it
can manage around the I/O accesses.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 19 Feb 2024 20:40:52 +0000 (12:40 -0800)]
net: bcmgenet: Pass "main" clock down to the MDIO driver
GENET has historically had to create a MDIO platform device for its
controller and pass some auxiliary data to it, like a MDIO completion
callback. Now we also pass the "main" clock to allow for the MDIO bus
controller to manage that clock adequately around I/O accesses.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 19 Feb 2024 20:40:51 +0000 (12:40 -0800)]
net: mdio: mdio-bcm-unimac: Manage clock around I/O accesses
Up until now we have managed not to have the mdio-bcm-unimac manage its
clock except during probe and suspend/resume. This works most of the
time, except where it does not.
With a fully modular build, we can get into a situation whereby the
GENET driver is fully registered, and so is the mdio-bcm-unimac driver,
however the Ethernet PHY driver is not yet, because it depends on a
resource that is not yet available (e.g.: GPIO provider). In that state,
the network device is not usable yet, and so to conserve power, the
GENET driver will have turned off its "main" clock which feeds its MDIO
controller.
When the PHY driver finally probes however, we make an access to the PHY
registers to e.g.: disable interrupts, and this causes a bus error
within the MDIO controller space because the MDIO controller clock(s)
are turned off.
To remedy that, we manage the clock around all of the I/O accesses to
the hardware which are done exclusively during read, write and clock
divider configuration.
This ensures that the register space is accessible, and this also
ensures that there are not unnecessarily elevated reference counts
keeping the clocks active when the network device is administratively
turned off. It would be the case with the previous way of managing the
clock.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 19 Feb 2024 17:45:48 +0000 (17:45 +0000)]
net: wan: framer: remove children from struct framer_ops kdoc
Remove documentation of non-existent children field
from the Kernel doc for struct framer_ops.
Introduced by
82c944d05b1a ("net: wan: Add framer framework support")
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Feb 2024 11:48:20 +0000 (11:48 +0000)]
Merge tag 'wireless-next-2024-02-20' of git://git./linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Feb 2024 11:28:58 +0000 (11:28 +0000)]
Merge branch 'net-kmem-cache-create'
Kunwu Chan says:
====================
net: Use KMEM_CACHE instead of kmem_cache_create
As Jiri Pirko suggests,
I'm using a patchset to cleanup the same issues in the 'net' module.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Some cache names are changed to be the same as struct names.
This change is recorded in the changelog for easy reference.
It's harmless cause it's used in /proc/slabinfo to identify this cache.
---
Changes in v2:
- Delete a patch as Eric said in https://lore.kernel.org/all/CANn89iLkWvum6wSqSya_K+1eqnFvp=L2WLW=kAYrZTF8Ei4b7g@mail.gmail.com/
- No code changes,only add Reviewed-by tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunwu Chan [Tue, 20 Feb 2024 07:36:46 +0000 (15:36 +0800)]
ipv6: Simplify the allocation of slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunwu Chan [Tue, 20 Feb 2024 07:36:45 +0000 (15:36 +0800)]
ipv4: Simplify the allocation of slab caches in ip_rt_init
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip_dst_cache' to 'rtable'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunwu Chan [Tue, 20 Feb 2024 07:36:44 +0000 (15:36 +0800)]
ipmr: Simplify the allocation of slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip_mrt_cache' to 'mfc_cache'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunwu Chan [Tue, 20 Feb 2024 07:36:43 +0000 (15:36 +0800)]
ip6mr: Simplify the allocation of slab caches in ip6_mr_init
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip6_mrt_cache' to 'mfc6_cache'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunwu Chan [Tue, 20 Feb 2024 07:36:42 +0000 (15:36 +0800)]
net: kcm: Simplify the allocation of slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'kcm_mux_cache' to 'kcm_mux',
'kcm_psock_cache' to 'kcm_psock'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Mon, 19 Feb 2024 13:43:28 +0000 (05:43 -0800)]
net/dummy: Move stats allocation to core
With commit
34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move dummy driver to leverage the core allocation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 18 Feb 2024 18:04:42 +0000 (19:04 +0100)]
tg3: simplify tg3_phy_autoneg_cfg
Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 18 Feb 2024 14:49:55 +0000 (15:49 +0100)]
tg3: copy only needed fields from userspace-provided EEE data
The current code overwrites fields in tp->eee with unchecked data from
edata, e.g. the bitmap with supported modes. ethtool properly returns
the received data from get_eee() call, but we have no guarantee that
other users of the ioctl set_eee() interface behave properly too.
Therefore copy only fields which are actually needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Feb 2024 09:45:24 +0000 (09:45 +0000)]
Merge branch 'net-constify-device_type'
Ricardo B. Marliere says:
====================
net: constify struct device_type usage
This is a simple and straight forward cleanup series that makes all device
types in the net subsystem constants. This has been possible since 2011 [1]
but not all occurrences were cleaned. I have been sweeping the tree to fix
them all.
I was not sure if I should send these squashed, but there are quite a few
changes so I decided to send them separately. Please let me know if that is
not desirable.
[1] https://lore.kernel.org/all/
1305850262-9575-5-git-send-email-gregkh@suse.de/
====================
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:34 +0000 (17:13 -0300)]
net: hso: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the hso_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:33 +0000 (17:13 -0300)]
net: wwan: core: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the wwan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:32 +0000 (17:13 -0300)]
net: netdevsim: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
nsim_bus_dev_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:31 +0000 (17:13 -0300)]
net: vlan: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the vlan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:30 +0000 (17:13 -0300)]
net: l2tp: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the l2tpeth_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:29 +0000 (17:13 -0300)]
net: hsr: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the hsr_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:28 +0000 (17:13 -0300)]
net: geneve: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the geneve_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:27 +0000 (17:13 -0300)]
net: ppp: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the ppp_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:26 +0000 (17:13 -0300)]
net: vxlan: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the vxlan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:25 +0000 (17:13 -0300)]
net: bridge: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the br_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:24 +0000 (17:13 -0300)]
net: dsa: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the dsa_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ricardo B. Marliere [Sat, 17 Feb 2024 20:13:23 +0000 (17:13 -0300)]
net: usbnet: constify the struct device_type usage
Since commit
aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the wlan_type
and wwan_type variables to be constant structures as well, placing it into
read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Sat, 17 Feb 2024 10:03:06 +0000 (11:03 +0100)]
net: wan: framer: constify of_phandle_args in xlate
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240217100306.86740-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sat, 17 Feb 2024 14:48:23 +0000 (15:48 +0100)]
r8169: add MODULE_FIRMWARE entry for RTL8126A
Add the missing MODULE_FIRMWARE entry for RTL8126A.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/47ef79d2-59c4-4d44-9595-366c70c4ad87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Sat, 17 Feb 2024 11:12:14 +0000 (12:12 +0100)]
net: fix pointer check in skb_pp_cow_data routine
Properly check page pointer returned by page_pool_dev_alloc routine in
skb_pp_cow_data() for non-linear part of the original skb.
Reported-by: Julian Wiedmann <jwiedmann.dev@gmail.com>
Closes: https://lore.kernel.org/netdev/cover.
1707729884.git.lorenzo@kernel.org/T/#m7d189b0015a7281ed9221903902490c03ed19a7a
Fixes:
e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in generic mode")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/25512af3e09befa9dcb2cf3632bdc45b807cf330.1708167716.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Feb 2024 14:32:44 +0000 (15:32 +0100)]
Merge tag 'linux-can-next-for-6.9-
20240220' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-02-20
this is a pull request of 9 patches for net-next/master.
The first patch is by Francesco Dolcini and removes a redundant check
for pm_clock_support from the m_can driver.
Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to
allow resume upon RX of a CAN frame.
3 patches by Srinivas Goud add support for ECC statistics to the
xilinx_can driver.
The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW
protocol and fix an error in the getsockopt() for CAN-XL introduced in
the previous pull request to net-next (linux-can-next-for-6.9-
20240213).
linux-can-next-for-6.9-
20240220
* tag 'linux-can-next-for-6.9-
20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: raw: raw_getsockopt(): reduce scope of err
can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
can: xilinx_can: Add ethtool stats interface for ECC errors
can: xilinx_can: Add ECC support
dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
can: tcan4x5x: support resuming from rx interrupt signal
can: m_can: allow keeping the transceiver running in suspend
dt-bindings: can: tcan4x5x: Document the wakeup-source flag
can: m_can: remove redundant check for pm_clock_support
====================
Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal [Fri, 16 Feb 2024 11:36:57 +0000 (12:36 +0100)]
net: skbuff: add overflow debug check to pull/push helpers
syzbot managed to trigger following splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x4a3b/0x5e50
Read of size 1 at addr
ffff888208a4000e by task a.out/2313
[..]
__skb_flow_dissect+0x4a3b/0x5e50
__skb_get_hash+0xb4/0x400
ip_tunnel_xmit+0x77e/0x26f0
ipip_tunnel_xmit+0x298/0x410
..
Analysis shows that the skb has a valid ->head, but bogus ->data
pointer.
skb->data gets its bogus value via the neigh layer, which does:
1556 __skb_pull(skb, skb_network_offset(skb));
... and the skb was already dodgy at this point:
skb_network_offset(skb) returns a negative value due to an
earlier overflow of skb->network_header (u16). __skb_pull thus
"adjusts" skb->data by a huge offset, pointing outside skb->head
area.
Allow debug builds to splat when we try to pull/push more than
INT_MAX bytes.
After this, the syzkaller reproducer yields a more precise splat
before the flow dissector attempts to read off skb->data memory:
WARNING: CPU: 5 PID: 2313 at include/linux/skbuff.h:2653 neigh_connected_output+0x28e/0x400
ip_finish_output2+0xb25/0xed0
iptunnel_xmit+0x4ff/0x870
ipgre_xmit+0x78e/0xbb0
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216113700.23013-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Fri, 16 Feb 2024 16:20:06 +0000 (16:20 +0000)]
net: reorganize "struct sock" fields
Last major reorg happened in commit
9115e8cd2a0c ("net: reorganize
struct sock for better data locality")
Since then, many changes have been done.
Before SO_PEEK_OFF support is added to TCP, we need
to move sk_peek_off to a better location.
It is time to make another pass, and add six groups,
without explicit alignment.
- sock_write_rx (following sk_refcnt) read-write fields in rx path.
- sock_read_rx read-mostly fields in rx path.
- sock_read_rxtx read-mostly fields in both rx and tx paths.
- sock_write_rxtx read-write fields in both rx and tx paths.
- sock_write_tx read-write fields in tx paths.
- sock_read_tx read-mostly fields in tx paths.
Results on TCP_RR benchmarks seem to show a gain (4 to 5 %).
It is possible UDP needs a change, because sk_peek_off
shares a cache line with sk_receive_queue.
If this the case, we can exchange roles of sk->sk_receive
and up->reader_queue queues.
After this change, we have the following layout:
struct sock {
struct sock_common __sk_common; /* 0 0x88 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
__u8 __cacheline_group_begin__sock_write_rx[0]; /* 0x88 0 */
atomic_t sk_drops; /* 0x88 0x4 */
__s32 sk_peek_off; /* 0x8c 0x4 */
struct sk_buff_head sk_error_queue; /* 0x90 0x18 */
struct sk_buff_head sk_receive_queue; /* 0xa8 0x18 */
/* --- cacheline 3 boundary (192 bytes) --- */
struct {
atomic_t rmem_alloc; /* 0xc0 0x4 */
int len; /* 0xc4 0x4 */
struct sk_buff * head; /* 0xc8 0x8 */
struct sk_buff * tail; /* 0xd0 0x8 */
} sk_backlog; /* 0xc0 0x18 */
struct {
atomic_t rmem_alloc; /* 0 0x4 */
int len; /* 0x4 0x4 */
struct sk_buff * head; /* 0x8 0x8 */
struct sk_buff * tail; /* 0x10 0x8 */
/* size: 24, cachelines: 1, members: 4 */
/* last cacheline: 24 bytes */
};
__u8 __cacheline_group_end__sock_write_rx[0]; /* 0xd8 0 */
__u8 __cacheline_group_begin__sock_read_rx[0]; /* 0xd8 0 */
rcu * sk_rx_dst; /* 0xd8 0x8 */
int sk_rx_dst_ifindex; /* 0xe0 0x4 */
u32 sk_rx_dst_cookie; /* 0xe4 0x4 */
unsigned int sk_ll_usec; /* 0xe8 0x4 */
unsigned int sk_napi_id; /* 0xec 0x4 */
u16 sk_busy_poll_budget; /* 0xf0 0x2 */
u8 sk_prefer_busy_poll; /* 0xf2 0x1 */
u8 sk_userlocks; /* 0xf3 0x1 */
int sk_rcvbuf; /* 0xf4 0x4 */
rcu * sk_filter; /* 0xf8 0x8 */
/* --- cacheline 4 boundary (256 bytes) --- */
union {
rcu * sk_wq; /* 0x100 0x8 */
struct socket_wq * sk_wq_raw; /* 0x100 0x8 */
}; /* 0x100 0x8 */
union {
rcu * sk_wq; /* 0 0x8 */
struct socket_wq * sk_wq_raw; /* 0 0x8 */
};
void (*sk_data_ready)(struct sock *); /* 0x108 0x8 */
long sk_rcvtimeo; /* 0x110 0x8 */
int sk_rcvlowat; /* 0x118 0x4 */
__u8 __cacheline_group_end__sock_read_rx[0]; /* 0x11c 0 */
__u8 __cacheline_group_begin__sock_read_rxtx[0]; /* 0x11c 0 */
int sk_err; /* 0x11c 0x4 */
struct socket * sk_socket; /* 0x120 0x8 */
struct mem_cgroup * sk_memcg; /* 0x128 0x8 */
rcu * sk_policy[2]; /* 0x130 0x10 */
/* --- cacheline 5 boundary (320 bytes) --- */
__u8 __cacheline_group_end__sock_read_rxtx[0]; /* 0x140 0 */
__u8 __cacheline_group_begin__sock_write_rxtx[0]; /* 0x140 0 */
socket_lock_t sk_lock; /* 0x140 0x20 */
u32 sk_reserved_mem; /* 0x160 0x4 */
int sk_forward_alloc; /* 0x164 0x4 */
u32 sk_tsflags; /* 0x168 0x4 */
__u8 __cacheline_group_end__sock_write_rxtx[0]; /* 0x16c 0 */
__u8 __cacheline_group_begin__sock_write_tx[0]; /* 0x16c 0 */
int sk_write_pending; /* 0x16c 0x4 */
atomic_t sk_omem_alloc; /* 0x170 0x4 */
int sk_sndbuf; /* 0x174 0x4 */
int sk_wmem_queued; /* 0x178 0x4 */
refcount_t sk_wmem_alloc; /* 0x17c 0x4 */
/* --- cacheline 6 boundary (384 bytes) --- */
unsigned long sk_tsq_flags; /* 0x180 0x8 */
union {
struct sk_buff * sk_send_head; /* 0x188 0x8 */
struct rb_root tcp_rtx_queue; /* 0x188 0x8 */
}; /* 0x188 0x8 */
union {
struct sk_buff * sk_send_head; /* 0 0x8 */
struct rb_root tcp_rtx_queue; /* 0 0x8 */
};
struct sk_buff_head sk_write_queue; /* 0x190 0x18 */
u32 sk_dst_pending_confirm; /* 0x1a8 0x4 */
u32 sk_pacing_status; /* 0x1ac 0x4 */
struct page_frag sk_frag; /* 0x1b0 0x10 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct timer_list sk_timer; /* 0x1c0 0x28 */
/* XXX last struct has 4 bytes of padding */
unsigned long sk_pacing_rate; /* 0x1e8 0x8 */
atomic_t sk_zckey; /* 0x1f0 0x4 */
atomic_t sk_tskey; /* 0x1f4 0x4 */
__u8 __cacheline_group_end__sock_write_tx[0]; /* 0x1f8 0 */
__u8 __cacheline_group_begin__sock_read_tx[0]; /* 0x1f8 0 */
unsigned long sk_max_pacing_rate; /* 0x1f8 0x8 */
/* --- cacheline 8 boundary (512 bytes) --- */
long sk_sndtimeo; /* 0x200 0x8 */
u32 sk_priority; /* 0x208 0x4 */
u32 sk_mark; /* 0x20c 0x4 */
rcu * sk_dst_cache; /* 0x210 0x8 */
netdev_features_t sk_route_caps; /* 0x218 0x8 */
u16 sk_gso_type; /* 0x220 0x2 */
u16 sk_gso_max_segs; /* 0x222 0x2 */
unsigned int sk_gso_max_size; /* 0x224 0x4 */
gfp_t sk_allocation; /* 0x228 0x4 */
u32 sk_txhash; /* 0x22c 0x4 */
u8 sk_pacing_shift; /* 0x230 0x1 */
bool sk_use_task_frag; /* 0x231 0x1 */
__u8 __cacheline_group_end__sock_read_tx[0]; /* 0x232 0 */
u8 sk_gso_disabled:1; /* 0x232: 0 0x1 */
u8 sk_kern_sock:1; /* 0x232:0x1 0x1 */
u8 sk_no_check_tx:1; /* 0x232:0x2 0x1 */
u8 sk_no_check_rx:1; /* 0x232:0x3 0x1 */
/* XXX 4 bits hole, try to pack */
u8 sk_shutdown; /* 0x233 0x1 */
u16 sk_type; /* 0x234 0x2 */
u16 sk_protocol; /* 0x236 0x2 */
unsigned long sk_lingertime; /* 0x238 0x8 */
/* --- cacheline 9 boundary (576 bytes) --- */
struct proto * sk_prot_creator; /* 0x240 0x8 */
rwlock_t sk_callback_lock; /* 0x248 0x8 */
int sk_err_soft; /* 0x250 0x4 */
u32 sk_ack_backlog; /* 0x254 0x4 */
u32 sk_max_ack_backlog; /* 0x258 0x4 */
kuid_t sk_uid; /* 0x25c 0x4 */
spinlock_t sk_peer_lock; /* 0x260 0x4 */
int sk_bind_phc; /* 0x264 0x4 */
struct pid * sk_peer_pid; /* 0x268 0x8 */
const struct cred * sk_peer_cred; /* 0x270 0x8 */
ktime_t sk_stamp; /* 0x278 0x8 */
/* --- cacheline 10 boundary (640 bytes) --- */
int sk_disconnects; /* 0x280 0x4 */
u8 sk_txrehash; /* 0x284 0x1 */
u8 sk_clockid; /* 0x285 0x1 */
u8 sk_txtime_deadline_mode:1; /* 0x286: 0 0x1 */
u8 sk_txtime_report_errors:1; /* 0x286:0x1 0x1 */
u8 sk_txtime_unused:6; /* 0x286:0x2 0x1 */
/* XXX 1 byte hole, try to pack */
void * sk_user_data; /* 0x288 0x8 */
void * sk_security; /* 0x290 0x8 */
struct sock_cgroup_data sk_cgrp_data; /* 0x298 0x8 */
void (*sk_state_change)(struct sock *); /* 0x2a0 0x8 */
void (*sk_write_space)(struct sock *); /* 0x2a8 0x8 */
void (*sk_error_report)(struct sock *); /* 0x2b0 0x8 */
int (*sk_backlog_rcv)(struct sock *, struct sk_buff *); /* 0x2b8 0x8 */
/* --- cacheline 11 boundary (704 bytes) --- */
void (*sk_destruct)(struct sock *); /* 0x2c0 0x8 */
rcu * sk_reuseport_cb; /* 0x2c8 0x8 */
rcu * sk_bpf_storage; /* 0x2d0 0x8 */
struct callback_head sk_rcu __attribute__((__aligned__(8))); /* 0x2d8 0x10 */
netns_tracker ns_tracker; /* 0x2e8 0x8 */
/* size: 752, cachelines: 12, members: 105 */
/* sum members: 749, holes: 1, sum holes: 1 */
/* sum bitfield members: 12 bits, bit holes: 1, sum bit holes: 4 bits */
/* paddings: 1, sum paddings: 4 */
/* forced alignments: 1 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240216162006.2342759-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Colin Ian King [Fri, 16 Feb 2024 12:54:43 +0000 (12:54 +0000)]
net: tcp: Remove redundant initialization of variable len
The variable len being initialized with a value that is never read, an
if statement is initializing it in both paths of the if statement.
The initialization is redundant and can be removed.
Cleans up clang scan build warning:
net/ipv4/tcp_ao.c:512:11: warning: Value stored to 'len' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240216125443.2107244-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde [Tue, 20 Feb 2024 08:16:16 +0000 (09:16 +0100)]
can: raw: raw_getsockopt(): reduce scope of err
Reduce the scope of the variable "err" to the individual cases. This
is to avoid the mistake of setting "err" in the mistaken belief that
it will be evaluated later.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Paolo Abeni [Tue, 20 Feb 2024 08:23:00 +0000 (09:23 +0100)]
Merge branch 'abstract-page-from-net-stack'
Mina Almasry says:
====================
Abstract page from net stack
This series is a prerequisite to the devmem TCP series. For a full
snapshot of the code which includes these changes, feel free to check:
https://github.com/mina/linux/commits/tcpdevmem-rfcv5/
Currently these components in the net stack use the struct page
directly:
1. Drivers.
2. Page pool.
3. skb_frag_t.
To add support for new (non struct page) memory types to the net stack, we
must first abstract the current memory type.
Originally the plan was to reuse struct page* for the new memory types,
and to set the LSB on the page* to indicate it's not really a page.
However, for safe compiler type checking we need to introduce a new type.
struct netmem is introduced to abstract the underlying memory type.
Currently it's a no-op abstraction that is always a struct page underneath.
In parallel there is an undergoing effort to add support for devmem to the
net stack:
https://lore.kernel.org/netdev/
20231208005250.
2910004-1-almasrymina@google.com/
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
====================
Link: https://lore.kernel.org/r/20240214223405.1972973-1-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mina Almasry [Wed, 14 Feb 2024 22:34:03 +0000 (14:34 -0800)]
net: add netmem to skb_frag_t
Use struct netmem* instead of page in skb_frag_t. Currently struct
netmem* is always a struct page underneath, but the abstraction
allows efforts to add support for skb frags not backed by pages.
There is unfortunately 1 instance where the skb_frag_t is assumed to be
a exactly a bio_vec in kcm. For this case, WARN_ON_ONCE and return error
before doing a cast.
Add skb[_frag]_fill_netmem_*() and skb_add_rx_frag_netmem() helpers so
that the API can be used to create netmem skbs.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mina Almasry [Wed, 14 Feb 2024 22:34:02 +0000 (14:34 -0800)]
net: introduce abstraction for network memory
Add the netmem_ref type, an abstraction for network memory.
To add support for new memory types to the net stack, we must first
abstract the current memory type. Currently parts of the net stack
use struct page directly:
- page_pool
- drivers
- skb_frag_t
Originally the plan was to reuse struct page* for the new memory types,
and to set the LSB on the page* to indicate it's not really a page.
However, for compiler type checking we need to introduce a new type.
netmem_ref is introduced to abstract the underlying memory type.
Currently it's a no-op abstraction that is always a struct page
underneath. In parallel there is an undergoing effort to add support
for devmem to the net stack:
https://lore.kernel.org/netdev/
20231208005250.
2910004-1-almasrymina@google.com/
netmem_ref can be pointers to different underlying memory types, and the
low bits are set to indicate the memory type. Helpers are provided
to convert netmem pointers to the underlying memory type (currently only
struct page). In the devmem series helpers are provided so that calling
code can use netmem without worrying about the underlying memory type
unless absolutely necessary.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oliver Hartkopp [Mon, 19 Feb 2024 20:00:21 +0000 (21:00 +0100)]
can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted
from the CAN_RAW_FILTER getsockopt().
Add the missing put_user() and return statements.
Flagged by Smatch.
Fixes:
c83c22ec1493 ("can: canxl: add virtual CAN network identifier support")
Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Breno Leitao [Fri, 16 Feb 2024 09:41:52 +0000 (01:41 -0800)]
net: sysfs: Do not create sysfs for non BQL device
Creation of sysfs entries is expensive, mainly for workloads that
constantly creates netdev and netns often.
Do not create BQL sysfs entries for devices that don't need,
basically those that do not have a real queue, i.e, devices that has
NETIF_F_LLTX and IFF_NO_QUEUE, such as `lo` interface.
This will remove the /sys/class/net/eth0/queues/tx-X/byte_queue_limits/
directory for these devices.
In the example below, eth0 has the `byte_queue_limits` directory but not
`lo`.
# ls /sys/class/net/lo/queues/tx-0/
traffic_class tx_maxrate tx_timeout xps_cpus xps_rxqs
# ls /sys/class/net/eth0/queues/tx-0/byte_queue_limits/
hold_time inflight limit limit_max limit_min
This also removes the #ifdefs, since we can also use netdev_uses_bql() to
check if the config is enabled. (as suggested by Jakub).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240216094154.3263843-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Fri, 16 Feb 2024 09:25:43 +0000 (10:25 +0100)]
net: page_pool: fix recycle stats for system page_pool allocator
Use global percpu page_pool_recycle_stats counter for system page_pool
allocator instead of allocating a separate percpu variable for each
(also percpu) page pool instance.
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/87f572425e98faea3da45f76c3c68815c01a20ee.1708075412.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Thu, 15 Feb 2024 11:39:05 +0000 (12:39 +0100)]
page_pool: disable direct recycling based on pool->cpuid on destroy
Now that direct recycling is performed basing on pool->cpuid when set,
memory leaks are possible:
1. A pool is destroyed.
2. Alloc cache is emptied (it's done only once).
3. pool->cpuid is still set.
4. napi_pp_put_page() does direct recycling basing on pool->cpuid.
5. Now alloc cache is not empty, but it won't ever be freed.
In order to avoid that, rewrite pool->cpuid to -1 when unlinking NAPI to
make sure no direct recycling will be possible after emptying the cache.
This involves a bit of overhead as pool->cpuid now must be accessed
via READ_ONCE() to avoid partial reads.
Rename page_pool_unlink_napi() -> page_pool_disable_direct_recycling()
to reflect what it actually does and unexport it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240215113905.96817-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frank Li [Thu, 1 Feb 2024 20:22:42 +0000 (15:22 -0500)]
dt-bindings: net: fec: add iommus property
iMX8QM have iommu. Add proerty 'iommus'.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240201-8qm_smmu-v2-2-3d12a80201a3@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ajay Singh [Thu, 15 Feb 2024 15:36:21 +0000 (16:36 +0100)]
wifi: wilc1000: add missing read critical sections around vif list traversal
Some code manipulating the vif list is still missing some srcu_read_lock /
srcu_read_unlock, and so can trigger RCU warnings:
=============================
WARNING: suspicious RCU usage
6.8.0-rc1+ #37 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:110 RCU-list traversed without holding the required lock!!
[...]
stack backtrace:
CPU: 0 PID: 6 Comm: kworker/0:0 Not tainted 6.8.0-rc1+ #37
Hardware name: Atmel SAMA5
Workqueue: events sdio_irq_work
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x58
dump_stack_lvl from wilc_get_vif_from_idx+0x158/0x180
wilc_get_vif_from_idx from wilc_network_info_received+0x80/0x48c
wilc_network_info_received from wilc_handle_isr+0xa10/0xd30
wilc_handle_isr from wilc_sdio_interrupt+0x44/0x58
wilc_sdio_interrupt from process_sdio_pending_irqs+0x1c8/0x60c
process_sdio_pending_irqs from sdio_irq_work+0x6c/0x14c
sdio_irq_work from process_one_work+0x8d4/0x169c
process_one_work from worker_thread+0x8cc/0x1340
worker_thread from kthread+0x448/0x510
kthread from ret_from_fork+0x14/0x28
Fix those warnings by adding the needed lock around the corresponding
critical sections
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-4-f610e46c6f82@bootlin.com
Alexis Lothoré [Thu, 15 Feb 2024 15:36:20 +0000 (16:36 +0100)]
wifi: wilc1000: fix declarations ordering
Fix reverse-christmas tree order in some functions before adding more
variables
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-3-f610e46c6f82@bootlin.com
Alexis Lothoré [Thu, 15 Feb 2024 15:36:19 +0000 (16:36 +0100)]
wifi: wilc1000: use SRCU instead of RCU for vif list traversal
Enabling CONFIG_PROVE_RCU_LIST raises many warnings in wilc driver, even on
some places already protected by a read critical section. An example of
such case is in wilc_get_available_idx:
=============================
WARNING: suspicious RCU usage
6.8.0-rc1+ #32 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/netdev.c:944 RCU-list traversed in non-reader section!!
[...]
stack backtrace:
CPU: 0 PID: 26 Comm: kworker/0:3 Not tainted 6.8.0-rc1+ #32
Hardware name: Atmel SAMA5
Workqueue: events_freezable mmc_rescan
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x58
dump_stack_lvl from wilc_netdev_ifc_init+0x788/0x8ec
wilc_netdev_ifc_init from wilc_cfg80211_init+0x690/0x910
wilc_cfg80211_init from wilc_sdio_probe+0x168/0x490
wilc_sdio_probe from sdio_bus_probe+0x230/0x3f4
sdio_bus_probe from really_probe+0x270/0xdf4
really_probe from __driver_probe_device+0x1dc/0x580
__driver_probe_device from driver_probe_device+0x60/0x140
driver_probe_device from __device_attach_driver+0x268/0x364
__device_attach_driver from bus_for_each_drv+0x15c/0x1cc
bus_for_each_drv from __device_attach+0x1ec/0x3e8
__device_attach from bus_probe_device+0x190/0x1c0
bus_probe_device from device_add+0x10dc/0x18e4
device_add from sdio_add_func+0x1c0/0x2c0
sdio_add_func from mmc_attach_sdio+0xa08/0xe1c
mmc_attach_sdio from mmc_rescan+0xa00/0xfe0
mmc_rescan from process_one_work+0x8d4/0x169c
process_one_work from worker_thread+0x8cc/0x1340
worker_thread from kthread+0x448/0x510
kthread from ret_from_fork+0x14/0x28
This warning is due to the section being protected by a srcu critical read
section, but the list traversal being done with classic RCU API. Fix the
warning by using corresponding SRCU read lock/unlock APIs. While doing so,
since we always manipulate the same list (managed through a pointer
embedded in struct_wilc), add a macro to reduce the corresponding
boilerplate in each call site.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-2-f610e46c6f82@bootlin.com
Alexis Lothoré [Thu, 15 Feb 2024 15:36:18 +0000 (16:36 +0100)]
wifi: wilc1000: split deeply nested RCU list traversal in dedicated helper
Move netif_wake_queue and its surrounding RCU operations in a dedicated
function to clarify wilc_txq_task and ease refactoring
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-1-f610e46c6f82@bootlin.com
Ping-Ke Shih [Thu, 15 Feb 2024 05:57:41 +0000 (13:57 +0800)]
wifi: rtw89: 8922a: add helper of set_channel
Reset hardware state to prevent hardware stays at abnormal state during
setting channel. Besides, add preparation for MLO/DBCC before setting
channel, and reconfigure registers after that.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-5-pkshih@realtek.com
Ping-Ke Shih [Thu, 15 Feb 2024 05:57:40 +0000 (13:57 +0800)]
wifi: rtw89: 8922a: add set_channel RF part
Configure RF registers according to band, channel, bandwidth. Since this
chip will support MLO, it needs check the operating mode to decide paths
we are going to configure.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-4-pkshih@realtek.com
Ping-Ke Shih [Thu, 15 Feb 2024 05:57:39 +0000 (13:57 +0800)]
wifi: rtw89: 8922a: add set_channel BB part
In additional to configure band, channel and bandwidth registers, it also
configure CCK support on 2GHZ band, spur elimination, and RX gain.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-3-pkshih@realtek.com
Ping-Ke Shih [Thu, 15 Feb 2024 05:57:38 +0000 (13:57 +0800)]
wifi: rtw89: 8922a: add set_channel MAC part
To set channel, add a function to get TXSB (TX subband) that is hardware
index to indicate primary channel. Then, configure band, channel,
bandwidth and TXSB via registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-2-pkshih@realtek.com
Kees Cook [Fri, 16 Feb 2024 23:27:44 +0000 (15:27 -0800)]
net: sched: Annotate struct tc_pedit with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tc_pedit.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Feb 2024 10:29:08 +0000 (10:29 +0000)]
Merge branch 'pds_core-AER-handling'
Shannon Nelson says:
====================
pds_core: AER handling
Add simple handlers for the PCI AER callbacks, and improve
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Fri, 16 Feb 2024 22:29:52 +0000 (14:29 -0800)]
pds_core: use pci_reset_function for health reset
We get the benefit of all the PCI reset locking and recovery if
we use the existing pci_reset_function() that will call our
local reset handlers.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Fri, 16 Feb 2024 22:29:51 +0000 (14:29 -0800)]
pds_core: delete VF dev on reset
When the VF is hit with a reset, remove the aux device in
the prepare for reset and try to restore it after the reset.
The userland mechanics will need to recover and rebuild whatever
uses the device afterwards.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Fri, 16 Feb 2024 22:29:50 +0000 (14:29 -0800)]
pds_core: add simple AER handler
Set up the pci_error_handlers error_detected and resume to be
useful in handling AER events.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Feb 2024 10:20:39 +0000 (10:20 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/next
-queue
Tony Nguyen says:
====================
i40e: Simplify VSI and VEB handling
Ivan Vecera says:
The series simplifies handling of VSIs and VEBs by introducing for-each
iterating macros, 'find' helper functions. Also removes the VEB
recursion because the VEBs cannot have sub-VEBs according datasheet and
fixes the support for floating VEBs.
The series content:
Patch 1 - Uses existing helper function for find FDIR VSI instead of loop
Patch 2 - Adds and uses macros to iterate VSI and VEB arrays
Patch 3 - Adds 2 helper functions to find VSIs and VEBs by their SEID
Patch 4 - Fixes broken support for floating VEBs
Patch 5 - Removes VEB recursion and simplifies VEB handling
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 15 Feb 2024 12:27:26 +0000 (13:27 +0100)]
tools: ynl: don't access uninitialized attr_space variable
If message contains unknown attribute and user passes
"--process-unknown" command line option, _decode() gets called with space
arg set to None. In that case, attr_space variable is not initialized
used which leads to following trace:
Traceback (most recent call last):
File "./tools/net/ynl/cli.py", line 77, in <module>
main()
File "./tools/net/ynl/cli.py", line 68, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 909, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 894, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 639, in _decode
self._rsp_add(rsp, attr_name, None, self._decode_unknown(attr))
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 569, in _decode_unknown
return self._decode(NlAttrs(attr.raw), None)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 630, in _decode
search_attrs = SpaceAttrs(attr_space, rsp, outer_attrs)
^^^^^^^^^^
UnboundLocalError: cannot access local variable 'attr_space' where it is not associated with a value
Fix this by moving search_attrs assignment under the if statement
above it to make sure attr_space is initialized.
Fixes:
bf8b832374fb ("tools/net/ynl: Support sub-messages in nested attribute spaces")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Thu, 15 Feb 2024 22:31:04 +0000 (17:31 -0500)]
net: ena: Remove ena_select_queue
Avoid the following warnings by removing the ena_select_queue() function
and rely on the net core to do the queue selection, The issue happen
when an skb received from an interface with more queues than ena is
forwarded to the ena interface.
[ 1176.159959] eth0 selects TX queue 11, but real number of TX queues is 8
[ 1176.863976] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1180.767877] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1188.703742] eth0 selects TX queue 14, but real number of TX queues is 8
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 15 Feb 2024 21:43:30 +0000 (22:43 +0100)]
net: phy: aquantia: add AQR813 PHY ID
Aquantia AQR813 is the Octal Port variant of the AQR113. Add PHY ID for
it to provide support for it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Thu, 15 Feb 2024 17:05:07 +0000 (09:05 -0800)]
net: bql: allow the config to be disabled
It is impossible to disable BQL individually today, since there is no
prompt for the Kconfig entry, so, the BQL is always enabled if SYSFS is
enabled.
Create a prompt entry for BQL, so, it could be enabled or disabled at
build time independently of SYSFS.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 17 Feb 2024 18:45:06 +0000 (18:45 +0000)]
Merge branch 'net-phy-eee-2'
Heiner Kallweit says:
====================
net: phy: add support for the EEE 2 registers
This series adds support for the EEE 2 registers. Most relevant and
for now the only supported modes are 2500baseT and 5000baseT.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 14 Feb 2024 20:19:47 +0000 (21:19 +0100)]
net: phy: c45: add support for MDIO_AN_EEE_ADV2
Add support for handling the EEE advertisement 2 register.
For now only 2500baseT and 5000baseT modes are supported.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 14 Feb 2024 20:18:50 +0000 (21:18 +0100)]
net: phy: c45: add support for EEE link partner ability 2 to genphy_c45_read_eee_lpa
Add support for reading EEE link partner ability 2 register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 14 Feb 2024 20:18:02 +0000 (21:18 +0100)]
net: phy: c45: add and use genphy_c45_read_eee_cap2
Add and use genphy_c45_read_eee_cap2(), complementing
genphy_c45_read_eee_cap1().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 14 Feb 2024 20:17:11 +0000 (21:17 +0100)]
net: phy: add PHY_EEE_CAP2_FEATURES
As a prerequisite for adding EEE CAP2 register support, complement
PHY_EEE_CAP1_FEATURES with PHY_EEE_CAP2_FEATURES.
For now only 2500baseT and 5000baseT modes are supported.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 14 Feb 2024 20:16:19 +0000 (21:16 +0100)]
net: mdio: add helpers for accessing the EEE CAP2 registers
This adds helpers for accessing the EEE CAP2 registers.
For now only 2500baseT and 5000baseT modes are supported.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Fri, 24 Nov 2023 15:03:43 +0000 (16:03 +0100)]
i40e: Remove VEB recursion
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Fri, 24 Nov 2023 15:03:42 +0000 (16:03 +0100)]
i40e: Fix broken support for floating VEBs
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Fri, 24 Nov 2023 15:03:41 +0000 (16:03 +0100)]
i40e: Add helpers to find VSI and VEB by SEID and use them
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Fri, 24 Nov 2023 15:03:40 +0000 (16:03 +0100)]
i40e: Introduce and use macros for iterating VSIs and VEBs
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.
Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)
and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)
These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Fri, 24 Nov 2023 15:03:39 +0000 (16:03 +0100)]
i40e: Use existing helper to find flow director VSI
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Arnd Bergmann [Tue, 13 Feb 2024 10:05:37 +0000 (11:05 +0100)]
wifi: brcmsmac: avoid function pointer casts
An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
64 | brcms_init_timer(physhim->wl, (void (*)(void *))fn,
| ^~~~~~~~~~~~~~~~~~~~
Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.
Fixes:
d89a4c80601d ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
Marc Kleine-Budde [Fri, 16 Feb 2024 13:18:35 +0000 (14:18 +0100)]
Merge patch series "Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller."
Marc Kleine-Budde <mkl@pengutronix.de> says:
ECC is an IP configuration option where counter registers are added in
IP for 1bit/2bit ECC errors count and reset.
Also driver reports 1bit/2bit ECC errors for FIFOs based on ECC error
interrupts.
Add xlnx,has-ecc optional property for Xilinx AXI CAN controller
to support ECC if the ECC block is enabled in the HW.
Add ethtool stats interface for getting all the ECC errors information.
There is no public documentation for it available.
Changes in v8:
- Use u64_stats_sync instead of spinlock
- Renamed stats strings: use "_" instead of "-"
- Renamed stats strings: add "_errors" trailer
- Renamed stats variables similar to stats strings
Changes in v7:
- Update with spinlock only for stats counters
Changes in v6:
- Update commit description
Changes in v5:
- Fix review comments
- Change the sequence of updates the stats
- Add get_strings and get_sset_count stats interface
- Use u64 stats helper function
Changes in v4:
- Fix DT binding check warning
- Update xlnx,has-ecc property description
Changes in v3:
- Update mailing list
- Update commit description
Changes in v2:
- Address review comments
- Add ethtool stats interface
- Update commit description
Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-0-8d75f8b80771@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Srinivas Goud [Tue, 13 Feb 2024 10:36:45 +0000 (11:36 +0100)]
can: xilinx_can: Add ethtool stats interface for ECC errors
Add ethtool stats interface for reading FIFO 1bit/2bit ECC errors
information.
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-3-8d75f8b80771@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Srinivas Goud [Tue, 13 Feb 2024 10:36:44 +0000 (11:36 +0100)]
can: xilinx_can: Add ECC support
Add ECC support for Xilinx CAN Controller, so this driver reports
1bit/2bit ECC errors for FIFO's based on ECC error interrupt. ECC
feature for Xilinx CAN Controller selected through 'xlnx,has-ecc' DT
property
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-2-8d75f8b80771@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Srinivas Goud [Tue, 13 Feb 2024 10:36:43 +0000 (11:36 +0100)]
dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
ECC feature added to CAN TX_OL, TX_TL and RX FIFOs of Xilinx AXI CAN
Controller.
ECC is an IP configuration option where counter registers are added in
IP for 1bit/2bit ECC errors.
'xlnx,has-ecc' is an optional property and added to Xilinx AXI CAN
Controller node if ECC block enabled in the HW
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-1-8d75f8b80771@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Christian Marangi [Thu, 15 Feb 2024 15:30:05 +0000 (16:30 +0100)]
net: phy: aquantia: add AQR113 PHY ID
Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of
the already supported AQR133C where the only difference is the PHY ID
and the hw chip size.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diogo Ivo [Thu, 15 Feb 2024 15:22:01 +0000 (15:22 +0000)]
net: ti: icssg-prueth: Remove duplicate cleanup calls in emac_ndo_stop()
Remove the duplicate calls to prueth_emac_stop() and
prueth_cleanup_tx_chns() in emac_ndo_stop().
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Thu, 15 Feb 2024 13:12:21 +0000 (14:12 +0100)]
tcp: Spelling s/curcuit/circuit/
Fix a misspelling of "circuit".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>