checkpatch: warn on missing spaces in broken up quoted

Checkpatch already complains when people break up quoted strings but
it's still pretty common.  One mistake that people often make is they
leave out the space character between the two strings.

This check adds around 450 new warnings and has a low rate of false
positives.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false positives for --strict "space after cast" test

Commit 89da401f6cff ("checkpatch: improve "no space after cast" test")
in -next improved the cast test for non pointer types, but also
introduced false positives for some types of static inlines.

Add a test for an open brace to the exclusions to avoid these false
positives.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false positive MISSING_BREAK warnings with --file

Using --file mode can give false positives with MISSING_BREAK
fall-through warnings on simple but long multiple consecutive case
statements.

Look for all lines before a case statement for a switch or a statement
when using --file mode.

Fix a misspelling of preceded while there.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for native c90 types in unusual order

c90 section "6.7.2 Type Specifiers" says:
    "type specifiers may occur in any order"

That means that:
    short int is the same as int short
    unsigned short int is the same as int unsigned short
    etc...

checkpatch currently parses only a subset of these allowed types.

For instance: "unsigned short" and "signed short" are found by
checkpatch as a specific type, but none of the or "int short" or "int
signed short" variants are found.

Add another table for the "kernel style misordered" variants.

Add this misordered table to the findable types.

Warn when the misordered style is used.

This improves the "Missing a blank line after declarations" test as it
depends on the correct parsing of the $Declare variable which looks for
"$Type $Ident;" (ie: declarations like "int foo;").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add signed generic types

Current generic types are unsigned or unspecified.  Add signed to the
types.

Reorder the types to find the longest match first.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add short int to c variable types

short int is one of the 6.7.2 c90 types.
Find it appropriately.

This fixes a defect in checkpatch where it suggests that a line break
after declaration is required using an input like:

int foo;
short int bar;

Without this change, it warns on the short int line.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add for_each tests to indentation and brace tests

All the various for_each loop macros were not tested for trailing brace
on the following lines and for bad indentation.

Add them.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Cc: Andy Whitcroft <apw@canonical.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix brace style misuses of else and while

Add --fix corrections for ELSE_AFTER_BRACE and WHILE_AFTER_BRACE
misuses.

if (x) {
...
}
else {
...
}

is corrected to

if (x) {
...
} else {
...
}

and

do {
...
}
while (x);

is corrected to

do {
...
} while (x);

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add --fix option for a couple OPEN_BRACE misuses

Style misuses of these types are corrected:

  typedef struct foo
  {
        int bar;
  };

  int foo(int bar) { return bar+1;
  }

  int foo(int bar) {
        return bar+1;
  }

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: use the correct indentation for which()

I copied the which subroutine from get_maintainer.pl.

Unfortunately, get_maintainer uses a 4 space indentation so use the
proper tab indentation instead.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add fix_insert_line and fix_delete_line helpers

Neaten the uses of patch/file line insertions or deletions.  Hide the
mechanism used.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add ability to insert and delete lines to patch/file

This can be valuable to insert or delete blank lines as well as fix
misplaced brace or else uses.

Store indexes of lines to be added/deleted and the new lines.

When creating the --fix file, insert or delete the appropriate lines and
update the patch range information.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add an index variable for fixed lines

Make the fix code a bit easier to read.

This should also start to allow an easier mechanism to insert/delete
lines eventually too.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on break after goto or return with same tab indentation

Using break; after a goto or return is unnecessary so emit a warning
when the break is at the same indent level.

So this emits a warning on:

switch (foo) {
case 1:
goto err;
break;
}

but not on:

switch (foo) {
case 1:
if (bar())
goto err;
break;
}

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: emit a warning on file add/move/delete

Whenever files are added, moved, or deleted, the MAINTAINERS file
patterns can be out of sync or outdated.

To try to keep MAINTAINERS more up-to-date, add a one-time warning
whenever a patch does any of those.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for commit id formatting style in commit log

Commit logs have various forms of commit id references.

Try to standardize on a 12 character long lower case commit id along
with a description of parentheses and the quoted subject line.

ie: commit 0123456789ab ("commit description")

If git and a git tree exists, look up the commit id and emit the
appropriate line as part of the message.

Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings

Avoid matching allocs that appear to be known small multiplications of a
sizeof with a constant because gcc as of 4.8 cannot optimize the code in
a calloc() exactly the same way as an alloc().

Look for numeric constants or what appear to be upper case only macro
#defines.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Theodore Ts'o <tytso@mit.edu>
Original-patch-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve "no space after cast" test

This --strict test previously worked only for what appeared to be cast
to pointer types.

Make it work for all casts.

Also, there's no reason to show the previous line for this type of
message, so don't.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: allow multiple const * types

checkpatch's $Type variable does not match declarations of multiple
const * types.

This can produce false positives for things like:

  $ ./scripts/checkpatch.pl -f drivers/staging/comedi/comedidev.h
  WARNING: Missing a blank line after declarations
  #60: FILE: drivers/staging/comedi/comedidev.h:60:
  +       const struct comedi_lrange *range_table;
  +       const struct comedi_lrange *const *range_table_list;

Fix the $Type variable to support matching multiple "* const" uses.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on unnecessary parentheses around references of foo->bar

Parentheses around &(foo->bar) and *(foo->bar) are unnecessary.  Emit a
--strict only message on these uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: quiet Kconfig help message checking

Editing Kconfig dependencies can emit unnecessary messages about missing
or too short help entries.

Only emit the message when adding help sections to Kconfig files.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: change blank line after declaration type to "LINE_SPACING"

Make it consistent with the other missing or multiple blank line tests.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add a multiple blank lines test

Multiple consecutive blank lines waste screen space.  Emit a --strict
only message with these blank lines.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for blank lines after function/struct/union/enum

Add a --strict test asking for a blank line after
function/struct/union/enum declarations.

Allow exceptions for several attributes and macro uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch.pl: also suggest 'else if' when if follows brace

This might help a kernel hacker think twice before blindly adding a
newline.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: ignore email headers better

There are some patches created by git format-patch that when scanned by
checkpatch report errors on lines like

To: address.tld

This is a checkpatch false positive.

Improve the logic a bit to ignore folded email headers to avoid emitting
these messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix function pointers in blank line needed after declarations test

Add a function pointer declaration check to the test for blank line
needed after declarations.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Bruce W Allan <bruce.w.allan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix complex macro false positive for escaped constant char

A single escaped constant char is not a complex macro.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on unnecessary else after return or break

Using an else following a break or return can unnecessarily indent code
blocks.

ie:
for (i = 0; i < 100; i++) {
int foo = bar();
if (foo < 1)
break;
else
usleep(1);
}

is generally better written as:

for (i = 0; i < 100; i++) {
int foo = bar();
if (foo < 1)
break;
usleep(1);
}

Warn when a bare else statement is preceded by a break or return
indented 1 tab more than the else.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: attempt to find unnecessary 'out of memory' messages

Logging messages that show some type of "out of memory" error are
generally unnecessary as there is a generic message and a stack dump
done by the memory subsystem.

These messages generally increase kernel size without much added value.

Emit a warning on these types of messages.

This test looks for any inserted message function, then looks at the
previous line for an "if (!foo)" or "if (foo == NULL)" test and then
looks at the preceding statement for an allocation function like "foo =
kmalloc()"

ie: this code matches:

foo = kmalloc();
if (foo == NULL) {
printk("Out of memory\n");
return -ENOMEM;
}

This test is very crude and incomplete.

This test can miss quite a lot of of OOM messages that do not have this
specific form.

ie: this code does not match:

foo = kmalloc();
if (!foo) {
rtn = -ENOMEM;
printk("Out of memory!\n");
goto out;
}

This test could also be a false positive when the logging message itself
does not specify anything about memory, but I did not find any false
positives in my limited testing.

spatch could be a better solution but correctness seems non-trivial for
that tool too.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: add missing mask in bitmap_andnot

Apparently, bitmap_andnot is supposed to return whether the new bitmap
is empty.  But it didn't take potential garbage bits in the last word
into account.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: add missing mask in bitmap_and

Apparently, bitmap_and is supposed to return whether the new bitmap is
empty.  But it didn't take potential garbage bits in the last word into
account.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: add missing mask in bitmap_shift_right

There is no guarantee that *src does not contain garbage bits outside
the lower nbits, so we need to mask it before the shift-and-assign.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: micro-optimize bitmap_allocate_region

__reg_op(..., REG_OP_ALLOC) always returns 0, so we might as well use that
and save an instruction.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: change parameter of bitmap_*_region to unsigned

Changing the pos parameter of __reg_op to unsigned allows the compiler
to generate slightly smaller and simpler code.  Also update its callers
bitmap_*_region to receive and pass unsigned int.  The return types of
bitmap_find_free_region and bitmap_allocate_region are still int to
allow a negative error code to be returned.  An int is certainly capable
of representing any realistic return value.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: fix typo in kerneldoc for bitmap_pos_to_ord

A few lines above, it was stated that positions for non-set bits are
mapped to -1, which is obviously also what the code does.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: simplify bitmap_parselist

We want len to be the index of the first '\n', or the length of the
string if there is no newline.  This is a good example of the usefulness
of strchrnul().  Use that instead, thus eliminating a branch and a call
to strlen().

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make the start index of bitmap_clear unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "start" is non-negative.

Also, use the names "start" and "len" for the two parameters for
consistency with bitmap_set.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make the start index of bitmap_set unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "start" is non-negative.

Also, use the names "start" and "len" for the two parameters in both
header file and implementation, instead of the previous mix.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_weight unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

I didn't change the return type, since that might change the semantics
of some expression containing a call to bitmap_weight(). Certainly an
int is capable of holding the result.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_subset unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_intersects unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_{and,or,xor,andnot} unsigned

This change is only for consistency with the changes to the other
bitmap_* functions; it doesn't change the size of the generated code:
inside BITS_TO_LONGS there is a sizeof(long), which causes bits to be
interpreted as unsigned anyway.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: remove unnecessary mask from bitmap_complement

Since the extra bits are "don't care", there is no reason to mask the
last word to the used bits when complementing.  This shaves off yet a
few bytes.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_complement unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_equal unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_full unsigned

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: make nbits parameter of bitmap_empty unsigned

Many functions in lib/bitmap.c start with an expression such as lim =
bits/BITS_PER_LONG.  Since bits has type (signed) int, and since gcc
cannot know that it is in fact non-negative, it generates worse code
than it could.  These patches, mostly consisting of changing various
parameters to unsigned, gives a slight overall code reduction:

  add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163)
  function                                     old     new   delta
  tick_device_uses_broadcast                   335     425     +90
  __irq_alloc_descs                            498     554     +56
  __bitmap_andnot                               73     115     +42
  __bitmap_and                                  70     101     +31
  bitmap_weight                                  -      11     +11
  copy_hugetlb_page_range                      752     762     +10
  follow_hugetlb_page                          846     854      +8
  hugetlb_init                                1415    1417      +2
  hugetlb_nrpages_setup                        130     131      +1
  hugetlb_add_hstate                           377     376      -1
  bitmap_allocate_region                        82      80      -2
  select_task_rq_fair                         2202    2191     -11
  hweight_long                                  66      55     -11
  __reg_op                                     230     219     -11
  dm_stats_message                            2849    2833     -16
  bitmap_parselist                              92      74     -18
  __bitmap_weight                              115      97     -18
  __bitmap_subset                              153     129     -24
  __bitmap_full                                128     104     -24
  __bitmap_empty                               120      96     -24
  bitmap_set                                   179     149     -30
  bitmap_clear                                 185     155     -30
  __bitmap_equal                               136     105     -31
  __bitmap_intersects                          148     108     -40
  __bitmap_complement                          109      67     -42
  tick_device_setup_broadcast_func.isra         81       -     -81

[The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18.
No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is
insignificant, I believe the bitmap functions are often called with
locks held, so saving even a few cycles might be worth it.

While making these changes, I found a few other things that might be
worth including.  16,17,18 are actual bug fixes.  The rest shouldn't
change the behaviour of any of the functions, provided no-one passed
negative nbits values.  If something should come up, it should be fairly
bisectable.

A few issues I thought about, but didn't know what to do with:

* Many of the functions misbehave if nbits is compile-time 0; the
  out-of-line functions generally handle 0 correctly.  bitmap_fill() is
  particularly bad, whether the 0 is known at compile time or not.  It
  would probably be nice to add detection of at least compile-time 0 and
  handle that appropriately.

* I didn't change __bitmap_shift_{left,right} to use unsigned because I
  want to fully understand why the algorithm works before making that
  change.  However, AFAICT, they behave correctly for all (positive) shift
  amounts.  This is not the case for the small_const_nbits versions.  If
  for example nbits = n = BITS_PER_LONG, the shift operators turn into
  no-ops (at least on x86), so one get *dst = *src, whereas one would
  expect to get *dst=0.  That difference in behaviour is somewhat
  annoying.

This patch (of 18):

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort.c: convert to pr_foo

Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: list_sort.c: Limit number of unused cmp callbacks

The helper merge_and_restore_back_links() makes sure to call the
caller's cmp function during the final ->prev pointer fixup, so that the
cmp function may call cond_resched().  However, if the cmp function does
not call cond_resched() at all, this is entirely redundant.  If it does,
doing at least two function calls for every two pointer assignments is a
bit excessive.  This patch limits the calls to once for every 256
iterations.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: list_sort_test(): simplify and harden cleanup

There is no reason to maintain the list structure while freeing the
debug elements.  Aside from the redundant pointer manipulations, it is
also inefficient from a locality-of-reference viewpoint, since they are
visited in a random order (wrt.  the order they were allocated).
Furthermore, if we jumped to exit: after detecting list corruption, it
is actually dangerous.

So just free the elements in the order they were allocated, using the
backing array elts.  Allocate that using kcalloc(), so that if
allocation of one of the debug element fails, we just end up calling
kfree(NULL) for the trailing elements.

Minor details: Use sizeof(*elts) instead of sizeof(void *), and return
err immediately when allocation of elts fails, to avoid introducing
another label just before the final return statement.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: list_sort_test(): add extra corruption check

Add a check to make sure that the prev pointer of the list head points
to the last element on the list.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: list_sort_test(): return -ENOMEM when allocation fails

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: remove deprecated pack_hex_byte

It's been nearly 3 years now since commit 55036ba76b2d ("lib: rename
pack_hex_byte() to hex_byte_pack()") so it's time to remove this
deprecated and unused static inline.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-kstrtox.c: use ARRAY_SIZE instead of sizeof/sizeof[0]

Use kernel.h definition.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c: constify static arrays

Complement commit 68aecfb97978 ("lib/string_helpers.c: make arrays
static") by making the arrays const -- not only pointing to const
strings.  This moves them out of the data section to the r/o data
section:

   text    data     bss     dec     hex filename
   1150     176       0    1326     52e lib/string_helpers.old.o
   1326       0       0    1326     52e lib/string_helpers.new.o

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline.c: add size unit t/p/e to memparse

For modern filesystems such as btrfs, t/p/e size level operations are
common.  add size unit t/p/e parsing to memparse

Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

libata: Use glob_match from lib/glob.c

The function may be useful for other drivers, so export it.  (Suggested
by Tejun Heo.)

Note that I inverted the return value of glob_match; returning true on
match seemed to make more sense.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/glob.c: add CONFIG_GLOB_SELFTEST

This was useful during development, and is retained for future
regression testing.

GCC appears to have no way to place string literals in a particular
section; adding __initconst to a char pointer leaves the string itself
in the default string section, where it will not be thrown away after
module load.

Thus all string constants are kept in explicitly declared and named
arrays.  Sorry this makes printk a bit harder to read.  At least the
tests are more compact.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add lib/glob.c

This is a helper function from drivers/ata/libata_core.c, where it is
used to blacklist particular device models.  It's being moved to lib/ so
other drivers may use it for the same purpose.

This implementation in non-recursive, so is safe for the kernel stack.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zlib: clean up some dead code

Cleanup unused `if 0'-ed functions, which have been dead since 2006
(commits 87c2ce3b9305 ("lib/zlib*: cleanups") by Adrian Bunk and
4f3865fb57a0 ("zlib_inflate: Upgrade library code to a recent version")
by Richard Purdie):

 - zlib_deflateSetDictionary
 - zlib_deflateParams
 - zlib_deflateCopy
 - zlib_inflateSync
 - zlib_syncsearch
 - zlib_inflateSetDictionary
 - zlib_inflatePrime

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

klist: use same naming scheme as hlist for klist_add_after()

The name was modified from hlist_add_after() to hlist_add_behind() when
adjusting the order of arguments to match the one with
klist_add_after().  This is necessary to break old code when it would
use it the wrong way.

Make klist follow this naming scheme for consistency.

Signed-off-by: Ken Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list: fix order of arguments for hlist_add_after(_rcu)

All other add functions for lists have the new item as first argument
and the position where it is added as second argument.  This was changed
for no good reason in this function and makes using it unnecessary
confusing.

The name was changed to hlist_add_behind() to cause unconverted code to
generate a compile error instead of using the wrong parameter order.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ken Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits]
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list: make hlist_add_after() argument names match hlist_add_after_rcu()

The argument names for hlist_add_after() are poorly chosen because they
look the same as the ones for hlist_add_before() but have to be used
differently.

hlist_add_after_rcu() has made a better choice.

Signed-off-by: Ken Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/printk/printk.c: fix bool assignements

Fix coccinelle warnings.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: enable interrupts before calling console_trylock_for_printk()

We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()).  However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().

We can lose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock().

We differ from (reverted) commit 939f04bec1a4 in that we avoid calling
console_unlock() from vprintk_emit() with lockdep enabled as that has
unveiled quite some bugs leading to system freezes during boot (e.g.
  https://lkml.org/lkml/2014/5/30/242,
  https://lkml.org/lkml/2014/6/28/521).

Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: miscellaneous cleanups

Some small cleanups to kernel/printk/printk.c.  None of them should
cause any change in behavior.

  - When CONFIG_PRINTK is defined, parenthesize the value of LOG_LINE_MAX.
  - When CONFIG_PRINTK is *not* defined, there is an extra LOG_LINE_MAX
    definition; delete it.
  - Pull an assignment out of a conditional expression in console_setup().
  - Use isdigit() in console_setup() rather than open coding it.
  - In update_console_cmdline(), drop a NUL-termination assignment;
    the strlcpy() call that precedes it guarantees it's not needed.
  - Simplify some logic in printk_timed_ratelimit().

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: use a clever macro

Use the IS_ENABLED() macro rather than #ifdef blocks to set certain
global values.

Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: fix some comments

Fix a few comments that don't accurately describe their corresponding
code.  It also fixes some minor typographical errors.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: rename DEFAULT_MESSAGE_LOGLEVEL

Commit a8fe19ebfbfd ("kernel/printk: use symbolic defines for console
loglevels") makes consistent use of symbolic values for printk() log
levels.

The naming scheme used is different from the one used for
DEFAULT_MESSAGE_LOGLEVEL though.  Change that symbol name to be
MESSAGE_LOGLEVEL_DEFAULT for consistency.  And because the value of that
symbol comes from a similarly-named config option, rename
CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well.

Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: tweak do_syslog() to match comments

In do_syslog() there's a path used by kmsg_poll() and kmsg_read() that
only needs to know whether there's any data available to read (and not
its size).  These callers only check for non-zero return.  As a
shortcut, do_syslog() returns the difference between what has been
logged and what has been "seen."

The comments say that the "count of records" should be returned but it's
not.  Instead it returns (log_next_idx - syslog_idx), which is a
difference between buffer offsets--and the result could be negative.

The behavior is the same (it'll be zero or not in the same cases), but
the count of records is more meaningful and it matches what the comments
say.  So change the code to return that.

Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: allow increasing the ring buffer depending on the number of CPUs

The default size of the ring buffer is too small for machines with a
large amount of CPUs under heavy load.  What ends up happening when
debugging is the ring buffer overlaps and chews up old messages making
debugging impossible unless the size is passed as a kernel parameter.
An idle system upon boot up will on average spew out only about one or
two extra lines but where this really matters is on heavy load and that
will vary widely depending on the system and environment.

There are mechanisms to help increase the kernel ring buffer for tracing
through debugfs, and those interfaces even allow growing the kernel ring
buffer per CPU.  We also have a static value which can be passed upon
boot.  Relying on debugfs however is not ideal for production, and
relying on the value passed upon bootup is can only used *after* an
issue has creeped up.  Instead of being reactive this adds a proactive
measure which lets you scale the amount of contributions you'd expect to
the kernel ring buffer under load by each CPU in the worst case
scenario.

We use num_possible_cpus() to avoid complexities which could be
introduced by dynamically changing the ring buffer size at run time,
num_possible_cpus() lets us use the upper limit on possible number of
CPUs therefore avoiding having to deal with hotplugging CPUs on and off.
This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT
which is used to specify the maximum amount of contributions to the
kernel ring buffer in the worst case before the kernel ring buffer flips
over, the size is specified as a power of 2.  The total amount of
contributions made by each CPU must be greater than half of the default
kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger
an increase upon bootup.  The kernel ring buffer is increased to the
next power of two that would fit the required minimum kernel ring buffer
size plus the additional CPU contribution.  For example if LOG_BUF_SHIFT
is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs
in order to trigger an increase of the kernel ring buffer.  With a
LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64
possible CPUs to trigger an increase.  If you had 128 possible CPUs the
amount of minimum required kernel ring buffer bumps to:

   ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB

Since we require the ring buffer to be a power of two the new required
size would be 1024 KB.

This CPU contributions are ignored when the "log_buf_len" kernel
parameter is used as it forces the exact size of the ring buffer to an
expected power of two value.

[pmladek@suse.cz: fix build]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Tested-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: make dynamic units clear for the kernel ring buffer

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Suggested-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: move power of 2 practice of ring buffer size to a helper

In practice the power of 2 practice of the size of the kernel ring
buffer remains purely historical but not a requirement, specially now
that we have LOG_ALIGN and use it for both static and dynamic
allocations.  It could have helped with implicit alignment back in the
days given the even the dynamically sized ring buffer was guaranteed to
be aligned so long as CONFIG_LOG_BUF_SHIFT was set to produce a
__LOG_BUF_LEN which is architecture aligned, since log_buf_len=n would
be allowed only if it was > __LOG_BUF_LEN and we always ended up
rounding the log_buf_len=n to the next power of 2 with
roundup_pow_of_two(), any multiple of 2 then should be also architecture
aligned.  These assumptions of course relied heavily on
CONFIG_LOG_BUF_SHIFT producing an aligned value but users can always
change this.

We now have precise alignment requirements set for the log buffer size
for both static and dynamic allocations, but lets upkeep the old
practice of using powers of 2 for its size to help with easy expected
scalable values and the allocators for dynamic allocations.  We'll reuse
this later so move this into a helper.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: make dynamic kernel ring buffer alignment explicit

We have to consider alignment for the ring buffer both for the default
static size, and then also for when an dynamic allocation is made when
the log_buf_len=n kernel parameter is passed to set the size
specifically to a size larger than the default size set by the
architecture through CONFIG_LOG_BUF_SHIFT.

The default static kernel ring buffer can be aligned properly if
architectures set CONFIG_LOG_BUF_SHIFT properly, we provide ranges for
the size though so even if CONFIG_LOG_BUF_SHIFT has a sensible aligned
value it can be reduced to a non aligned value.  Commit 6ebb017de9
("printk: Fix alignment of buf causing crash on ARM EABI") by Andrew
Lunn ensures the static buffer is always aligned and the decision of
alignment is done by the compiler by using __alignof__(struct log).

When log_buf_len=n is used we allocate the ring buffer dynamically.
Dynamic allocation varies, for the early allocation called before
setup_arch() memblock_virt_alloc() requests a page aligment and for the
default kernel allocation memblock_virt_alloc_nopanic() requests no
special alignment, which in turn ends up aligning the allocation to
SMP_CACHE_BYTES, which is L1 cache aligned.

Since we already have the required alignment for the kernel ring buffer
though we can do better and request explicit alignment for LOG_ALIGN.
This does that to be safe and make dynamic allocation alignment
explicit.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Tested-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Petr Mladek <pmladek@suse.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/byteorder/generic.h: minor comment fix

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs.h, drivers/hwmon/asus_atk0110.c: fix DEFINE_SIMPLE_ATTRIBUTE semicolon definition and use

The DEFINE_SIMPLE_ATTRIBUTE macro should not end in a ; Fix the one use
in the kernel tree that did not have a semicolon.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

./Makefile: tell gcc optimizer to never introduce new data races

We have been chasing a memory corruption bug, which turned out to be
caused by very old gcc (4.3.4), which happily turned conditional load
into a non-conditional one, and that broke correctness (the condition
was met only if lock was held) and corrupted memory.

This particular problem with that particular code did not happen when
never gccs were used.  I've brought this up with our gcc folks, as I
wanted to make sure that this can't really happen again, and it turns
out it actually can.

Quoting Martin Jambor <mjambor@suse.cz>:
 "More current GCCs are more careful when it comes to replacing a
  conditional load with a non-conditional one, most notably they check
  that a store happens in each iteration of _a_ loop but they assume
  loops are executed.  They also perform a simple check whether the
  store cannot trap which currently passes only for non-const
  variables.  A simple testcase demonstrating it on an x86_64 is for
  example the following:

  $ cat cond_store.c

  int g_1 = 1;

  int g_2[1024] __attribute__((section ("safe_section"), aligned (4096)));

  int c = 4;

  int __attribute__ ((noinline))
  foo (void)
  {
    int l;
    for (l = 0; (l != 4); l++) {
      if (g_1)
        return l;
      for (g_2[0] = 0; (g_2[0] >= 26); ++g_2[0])
        ;
    }
    return 2;
  }

  int main (int argc, char* argv[])
  {
    if (mprotect (g_2, sizeof(g_2), PROT_READ) == -1)
      {
        int e = errno;
        error (e, e, "mprotect error %i", e);
      }
    foo ();
    __builtin_printf("OK\n");
    return 0;
  }
  /* EOF */
  $ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=0
  $ ./a.out
  OK
  $ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=1
  $ ./a.out
  Segmentation fault

  The testcase fails the same at least with 4.9, 4.8 and 4.7.  Therefore
  I would suggest building kernels with this parameter set to zero. I
  also agree with Jikos that the default should be changed for -O2.  I
  have run most of the SPEC 2k6 CPU benchmarks (gamess and dealII
  failed, at -O2, not sure why) compiled with and without this option
  and did not see any real difference between respective run-times"

Hopefully the default will be changed in newer gccs, but let's force it
for kernel builds so that we are on a safe side even when older gcc are
used.

The code in question was out-of-tree printk-in-NMI (yeah, surprise
suprise, once again) patch written by Petr Mladek, let me quote his
comment from our internal bugzilla:

 "I have spent few days investigating inconsistent state of kernel ring buffer.
  It went out that it was caused by speculative store generated by
  gcc-4.3.4.

  The problem is in assembly generated for make_free_space(). The functions is
  called the following way:

  + vprintk_emit();
      + log = MAIN_LOG; // with logbuf_lock
         or
         log = NMI_LOG; // with nmi_logbuf_lock
         cont_add(log, ...);
          + cont_flush(log, ...);
              + log_store(log, ...);
                    + log_make_free_space(log, ...);

  If called with log = NMI_LOG then only nmi_log_* global variables are safe to
  modify but the generated code does store also into (main_)log_* global
  variables:

  <log_make_free_space>:
         55                      push   %rbp
         89 f6                   mov    %esi,%esi

         48 8b 05 03 99 51 01    mov    0x1519903(%rip),%rax       # ffffffff82620868 <nmi_log_next_id>
         44 8b 1d ec 98 51 01    mov    0x15198ec(%rip),%r11d      # ffffffff82620858 <log_next_idx>
         8b 35 36 60 14 01       mov    0x1146036(%rip),%esi       # ffffffff8224cfa8 <log_buf_len>
         44 8b 35 33 60 14 01    mov    0x1146033(%rip),%r14d      # ffffffff8224cfac <nmi_log_buf_len>
         4c 8b 2d d0 98 51 01    mov    0x15198d0(%rip),%r13       # ffffffff82620850 <log_next_seq>
         4c 8b 25 11 61 14 01    mov    0x1146111(%rip),%r12       # ffffffff8224d098 <log_buf>
         49 89 c2                mov    %rax,%r10
         48 21 c2                and    %rax,%rdx
         48 8b 1d 0c 99 55 01    mov    0x155990c(%rip),%rbx       # ffffffff826608a0 <nmi_log_buf>
         49 c1 ea 20             shr    $0x20,%r10
         48 89 55 d0             mov    %rdx,-0x30(%rbp)
         44 29 de                sub    %r11d,%esi
         45 29 d6                sub    %r10d,%r14d
         4c 8b 0d 97 98 51 01    mov    0x1519897(%rip),%r9 # ffffffff82620840 <log_first_seq>
         eb 7e                   jmp    ffffffff81107029 <log_make_free_space+0xe9>
  [...]
         85 ff                   test   %edi,%edi                  # edi = 1 for NMI_LOG
         4c 89 e8                mov    %r13,%rax
         4c 89 ca                mov    %r9,%rdx
         74 0a                   je     ffffffff8110703d <log_make_free_space+0xfd>
         8b 15 27 98 51 01       mov    0x1519827(%rip),%edx       # ffffffff82620860 <nmi_log_first_id>
         48 8b 45 d0             mov    -0x30(%rbp),%rax
         48 39 c2                cmp    %rax,%rdx                  # end of loop
         0f 84 da 00 00 00       je     ffffffff81107120 <log_make_free_space+0x1e0>
  [...]
         85 ff                   test   %edi,%edi                  # edi = 1 for NMI_LOG
         4c 89 0d 17 97 51 01    mov    %r9,0x1519717(%rip)        # ffffffff82620840 <log_first_seq>
                                 ^^^^^^^^^^^^^^^^^^^^^^^^^^
                                 KABOOOM
         74 35                   je     ffffffff81107160  <log_make_free_space+0x220>

  It stores log_first_seq when edi == NMI_LOG. This instructions are used also
  when edi == MAIN_LOG but the store is done speculatively before the condition
  is decided.  It is unsafe because we do not have "logbuf_lock" in NMI context
  and some other process migh modify "log_first_seq" in parallel"

I believe that the best course of action is both

 - building kernel (and anything multi-threaded, I guess) with that
   optimization turned off
 - persuade gcc folks to change the default for future releases

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marek Polacek <polacek@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Richard Biener <richard.guenther@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zpool: update zswap to use zpool

Change zswap to use the zpool api instead of directly using zbud.  Add a
boot-time param to allow selecting which zpool implementation to use,
with zbud as the default.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zpool: zbud/zsmalloc implement zpool

Update zbud and zsmalloc to implement the zpool api.

[fengguang.wu@intel.com: make functions static]
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zpool: implement common zpool api to zbud/zsmalloc

Add zpool api.

zpool provides an interface for memory storage, typically of compressed
memory.  Users can select what backend to use; currently the only
implementations are zbud, a low density implementation with up to two
compressed pages per storage page, and zsmalloc, a higher density
implementation with multiple compressed pages per storage page.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zbud: change zbud_alloc size type to size_t

Change the type of the zbud_alloc() size param from unsigned int to
size_t.

Technically, this should not make any difference, as the zbud
implementation already restricts the size to well within either type's
limits; but as zsmalloc (and kmalloc) use size_t, and zpool will use
size_t, this brings the size parameter type in line with zsmalloc/zpool.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: replace global tb_lock with fine grain lock

Currently, we use a rwlock tb_lock to protect concurrent access to the
whole zram meta table.  However, according to the actual access model,
there is only a small chance for upper user to access the same
table[index], so the current lock granularity is too big.

The idea of optimization is to change the lock granularity from whole
meta table to per table entry (table -> table[index]), so that we can
protect concurrent access to the same table[index], meanwhile allow the
maximum concurrency.

With this in mind, several kinds of locks which could be used as a
per-entry lock were tested and compared:

Test environment:
x86-64 Intel Core2 Q8400, system memory 4GB, Ubuntu 12.04,
kernel v3.15.0-rc3 as base, zram with 4 max_comp_streams LZO.

iozone test:
iozone -t 4 -R -r 16K -s 200M -I +Z
(1GB zram with ext4 filesystem, take the average of 10 tests, KB/s)

      Test       base      CAS    spinlock    rwlock   bit_spinlock
-------------------------------------------------------------------
 Initial write  1381094   1425435   1422860   1423075   1421521
       Rewrite  1529479   1641199   1668762   1672855   1654910
          Read  8468009  11324979  11305569  11117273  10997202
       Re-read  8467476  11260914  11248059  11145336  10906486
  Reverse Read  6821393   8106334   8282174   8279195   8109186
   Stride read  7191093   8994306   9153982   8961224   9004434
   Random read  7156353   8957932   9167098   8980465   8940476
Mixed workload  4172747   5680814   5927825   5489578   5972253
  Random write  1483044   1605588   1594329   1600453   1596010
        Pwrite  1276644   1303108   1311612   1314228   1300960
         Pread  4324337   4632869   4618386   4457870   4500166

To enhance the possibility of access the same table[index] concurrently,
set zram a small disksize(10MB) and let threads run with large loop
count.

fio test:
fio --bs=32k --randrepeat=1 --randseed=100 --refill_buffers
--scramble_buffers=1 --direct=1 --loops=3000 --numjobs=4
--filename=/dev/zram0 --name=seq-write --rw=write --stonewall
--name=seq-read --rw=read --stonewall --name=seq-readwrite
--rw=rw --stonewall --name=rand-readwrite --rw=randrw --stonewall
(10MB zram raw block device, take the average of 10 tests, KB/s)

    Test     base     CAS    spinlock    rwlock  bit_spinlock
-------------------------------------------------------------
seq-write   933789   999357   1003298    995961   1001958
 seq-read  5634130  6577930   6380861   6243912   6230006
   seq-rw  1405687  1638117   1640256   1633903   1634459
  rand-rw  1386119  1614664   1617211   1609267   1612471

All the optimization methods show a higher performance than the base,
however, it is hard to say which method is the most appropriate.

On the other hand, zram is mostly used on small embedded system, so we
don't want to increase any memory footprint.

This patch pick the bit_spinlock method, pack object size and page_flag
into an unsigned long table.value, so as to not increase any memory
overhead on both 32-bit and 64-bit system.

On the third hand, even though different kinds of locks have different
performances, we can ignore this difference, because: if zram is used as
zram swapfile, the swap subsystem can prevent concurrent access to the
same swapslot; if zram is used as zram-blk for set up filesystem on it,
the upper filesystem and the page cache also prevent concurrent access
of the same block mostly.  So we can ignore the different performances
among locks.

Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: use size_t instead of u16

Some architectures (eg, hexagon and PowerPC) could use PAGE_SHIFT of 16
or more.  In these cases u16 is not sufficiently large to represent a
compressed page's size so use size_t.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: remove unused SECTOR_SIZE define

Drop SECTOR_SIZE define, because it's not used.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: rename struct `table' to `zram_table_entry'

Andrew Morton has recently noted that `struct table' actually represents
table entry and, thus, should be renamed.  Rename to `zram_table_entry'.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/highmem: make kmap cache coloring aware

User-visible effect:
 Architectures that choose this method of maintaining cache coherency
(MIPS and xtensa currently) are able to use high memory on cores with
aliasing data cache.  Without this fix such architectures can not use
high memory (in case of xtensa it means that at most 128 MBytes of
physical memory is available).

The problem:
 VIPT cache with way size larger than MMU page size may suffer from
aliasing problem: a single physical address accessed via different
virtual addresses may end up in multiple locations in the cache.
Virtual mappings of a physical address that always get cached in
different cache locations are said to have different colors.  L1 caching
hardware usually doesn't handle this situation leaving it up to
software.  Software must avoid this situation as it leads to data
corruption.

What can be done:
 One way to handle this is to flush and invalidate data cache every time
page mapping changes color.  The other way is to always map physical
page at a virtual address with the same color.  Low memory pages already
have this property.  Giving architecture a way to control color of high
memory page mapping allows reusing of existing low memory cache alias
handling code.

How this is done with this patch:
 Provide hooks that allow architectures with aliasing cache to align
mapping address of high pages according to their color.  Such
architectures may enforce similar coloring of low- and high-memory page
mappings and reuse existing cache management functions to support
highmem.

This code is based on the implementation of similar feature for MIPS by
Leonid Yegoshin.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Marc Gauthier <marc@cadence.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Hill <Steven.Hill@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmu_notifier: add call_srcu and sync function for listener to delay call and sync

When kernel device drivers or subsystems want to bind their lifespan to
t= he lifespan of the mm_struct, they usually use one of the following
methods:

1. Manually calling a function in the interested kernel module.  The
   funct= ion call needs to be placed in mmput.  This method was rejected
   by several ker= nel maintainers.

2. Registering to the mmu notifier release mechanism.

The problem with the latter approach is that the mmu_notifier_release
cal= lback is called from__mmu_notifier_release (called from exit_mmap).
That functi= on iterates over the list of mmu notifiers and don't expect
the release call= back function to remove itself from the list.
Therefore, the callback function= in the kernel module can't release the
mmu_notifier_object, which is actuall= y the kernel module's object
itself.  As a result, the destruction of the kernel module's object must
to be done in a delayed fashion.

This patch adds support for this delayed callback, by adding a new
mmu_notifier_call_srcu function that receives a function ptr and calls
th= at function with call_srcu.  In that function, the kernel module
releases its object.  To use mmu_notifier_call_srcu, the calling module
needs to call b= efore that a new function called
mmu_notifier_unregister_no_release that as its= name implies,
unregisters a notifier without calling its notifier release call= back.

This patch also adds a function that will call barrier_srcu so those
kern= el modules can sync with mmu_notifier.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: BUG when __kmap_atomic_idx equals KM_TYPE_NR

__kmap_atomic_idx is per_cpu variable.  Each CPU can use KM_TYPE_NR
entries from FIXMAP i.e.  from 0 to KM_TYPE_NR - 1.  Allowing
__kmap_atomic_idx to over- shoot to KM_TYPE_NR can mess up with next
CPU's 0th entry which is a bug.  Hence BUG_ON if __kmap_atomic_idx >=
KM_TYPE_NR.

Fix the off-by-on in this test.

Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: clean up reclaim size variable use in try_charge()

Charge reclaim and OOM currently use the charge batch variable, but
batching is already disabled at that point.  To simplify the charge
logic, the batch variable is reset to the original request size when
reclaim is entered, so it's functionally equal, but it's misleading.

Switch reclaim/OOM to nr_pages, which is the original request size.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/smp.c:on_each_cpu_cond(): fix warning in fallback path

The rarely-executed memry-allocation-failed callback path generates a
WARN_ON_ONCE() when smp_call_function_single() succeeds.  Presumably
it's supposed to warn on failures.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@gentwo.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: change confusing #ifdef use in __access_remote_vm

This patch changes confusing #ifdef use in __access_remote_vm into
merely ugly #ifdef use.

Addresses bug https://bugzilla.kernel.org/show_bug.cgi?id=81651

Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: softdirty: respect VM_SOFTDIRTY in PTE holes

After a VMA is created with the VM_SOFTDIRTY flag set, /proc/pid/pagemap
should report that the VMA's virtual pages are soft-dirty until
VM_SOFTDIRTY is cleared (i.e., by the next write of "4" to
/proc/pid/clear_refs).  However, pagemap ignores the VM_SOFTDIRTY flag
for virtual addresses that fall in PTE holes (i.e., virtual addresses
that don't have a PMD, PUD, or PGD allocated yet).

To observe this bug, use mmap to create a VMA large enough such that
there's a good chance that the VMA will occupy an unused PMD, then test
the soft-dirty bit on its pages.  In practice, I found that a VMA that
covered a PMD's worth of address space was big enough.

This patch adds the necessary VMA lookup to the PTE hole callback in
/proc/pid/pagemap's page walk and sets soft-dirty according to the VMAs'
VM_SOFTDIRTY flag.

Signed-off-by: Peter Feiner <pfeiner@google.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mark fault_around_bytes __read_mostly

fault_around_bytes can only be changed via debugfs.  Let's mark it
read-mostly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: close race between do_fault_around() and fault_around_bytes_set()

Things can go wrong if fault_around_bytes will be changed under
do_fault_around(): between fault_around_mask() and fault_around_pages().

Let's read fault_around_bytes only once during do_fault_around() and
calculate mask based on the reading.

Note: fault_around_bytes can only be updated via debug interface.  Also
I've tried but was not able to trigger a bad behaviour without the
patch.  So I would not consider this patch as urgent.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg, vmscan: Fix forced scan of anonymous pages

When memory cgoups are enabled, the code that decides to force to scan
anonymous pages in get_scan_count() compares global values (free,
high_watermark) to a value that is restricted to a memory cgroup (file).
It make the code over-eager to force anon scan.

For instance, it will force anon scan when scanning a memcg that is
mainly populated by anonymous page, even when there is plenty of file
pages to get rid of in others memcgs, even when swappiness == 0.  It
breaks user's expectation about swappiness and hurts performance.

This patch makes sure that forced anon scan only happens when there not
enough file pages for the all zone, not just in one random memcg.

[hannes@cmpxchg.org: cleanups]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmscan: fix an outdated comment still mentioning get_scan_ratio

Quite a while ago, get_scan_ratio() has been renamed get_scan_count(),
however a comment in shrink_active_list() still mention it.  This patch
fixes the outdated comment.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom: remove unnecessary exit_state check

The oom killer scans each process and determines whether it is eligible
for oom kill or whether the oom killer should abort because of
concurrent memory freeing.  It will abort when an eligible process is
found to have TIF_MEMDIE set, meaning it has already been oom killed and
we're waiting for it to exit.

Processes with task->mm == NULL should not be considered because they
are either kthreads or have already detached their memory and killing
them would not lead to memory freeing.  That memory is only freed after
exit_mm() has returned, however, and not when task->mm is first set to
NULL.

Clear TIF_MEMDIE after exit_mm()'s mmput() so that an oom killed process
is no longer considered for oom kill, but only until exit_mm() has
returned.  This was fragile in the past because it relied on
exit_notify() to be reached before no longer considering TIF_MEMDIE
processes.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix potential infinite loop in dissolve_free_huge_pages()

It is possible for some platforms, such as powerpc to set HPAGE_SHIFT to
0 to indicate huge pages not supported.

When this is the case, hugetlbfs could be disabled during boot time:
hugetlbfs: disabling because there are no supported hugepage sizes

Then in dissolve_free_huge_pages(), order is kept maximum (64 for
64bits), and the for loop below won't end: for (pfn = start_pfn; pfn <
end_pfn; pfn += 1 << order)

As suggested by Naoya, below fix checks hugepages_supported() before
calling dissolve_free_huge_pages().

[rientjes@google.com: no legitimate reason to call dissolve_free_huge_pages() when !hugepages_supported()]
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: restructure thp avoidance of light synchronous migration

__GFP_NO_KSWAPD, once the way to determine if an allocation was for thp
or not, has gained more users.  Their use is not necessarily wrong, they
are trying to do a memory allocation that can easily fail without
disturbing kswapd, so the bit has gained additional usecases.

This restructures the check to determine whether MIGRATE_SYNC_LIGHT
should be used for memory compaction in the page allocator.  Rather than
testing solely for __GFP_NO_KSWAPD, test for all bits that must be set
for thp allocations.

This also moves the check to be done only after the page allocator is
aborted for deferred or contended memory compaction since setting
migration_mode for this case is pointless.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>