git.monstr.eu Git - linux-2.6-microblaze.git/log

drm/i915/dp: Read DPRX for all long HPD pulses

The TBT DP tunnel BW request logic in the Thunderbolt Connection Manager
depends on the GFX driver reading out the sink's DPRX capabilities in
response to a long HPD pulse. Since in i915 this read-out can be blocked
by another connector's/encoder's hotplug event handling (which is
serialized by drm_mode_config::connection_mutex), do a dummy DPRX read-out
in the encoder's HPD pulse handler (which is not blocked by other
encoders).

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-21-imre.deak@intel.com

drm/i915/dp: Suspend/resume DP tunnels

Suspend and resume DP tunnels during system suspend/resume, disabling
the BW allocation mode during suspend, re-enabling it after resume. This
reflects the link's BW management component (Thunderbolt CM) disabling
BWA during suspend. Before any BW requests the driver must read the
sink's DPRX capabilities (since the BW manager requires this
information, so snoops for it on AUX), so ensure this read takes place.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-20-imre.deak@intel.com

drm/i915/dp: Call intel_dp_sync_state() always for DDI DP encoders

A follow-up change will need to resume DP tunnels during system resume,
so call intel_dp_sync_state() always for DDI encoders, so this function
can resume the tunnels for all DP connectors.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-19-imre.deak@intel.com

drm/i915/dp: Handle DP tunnel IRQs

Handle DP tunnel IRQs a sink (or rather a BW management component like
the Thunderbolt Connection Manager) raises to signal the completion of a
BW request by the driver, or to signal any state change related to the
link BW.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-18-imre.deak@intel.com

drm/i915/dp: Allocate/free DP tunnel BW during modeset

Allocate and free the DP tunnel BW required by a stream while
enabling/disabling the stream during a modeset.

v2:
- Move the allocation up from encoder hooks to
intel_atomic_commit_tail().
v3:
- Update the commit subject. (Ville)

Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-17-imre.deak@intel.com

drm/i915/dp: Compute DP tunnel BW during encoder state computation

Compute the BW required through a DP tunnel on links with such tunnels
detected and add the corresponding atomic state during a modeset.

v2:
- Fix error check of intel_dp_tunnel_compute_stream_bw(). (Ville)
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to this patch.
(Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to this patch.

Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-16-imre.deak@intel.com

drm/i915/dp: Account for tunnel BW limit in intel_dp_max_link_data_rate()

Take any link BW limitation into account in
intel_dp_max_link_data_rate(). Such a limitation can be due to multiple
displays on (Thunderbolt) links with DP tunnels sharing the link BW.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-15-imre.deak@intel.com

drm/i915/dp: Add DP tunnel atomic state and check BW limit

Add the atomic state during a modeset required to enable the DP tunnel
BW allocation mode on links where such a tunnel was detected. This state
applies to an already enabled output, the state added for a newly
enabled output will be computed and added/cleared to/from the atomic
state in a follow-up patch.

v2:
- s/old_crtc_state/crtc_state in intel_crtc_duplicate_state().
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to a follow-up
patch adding the corresponding state. (Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to a follow-up
patch adding the corresponding state.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-14-imre.deak@intel.com

drm/i915/dp: Add support for DP tunnel BW allocation

Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a link with DP tunnels, the last change in the patchset
actually enabling BWA.

With BWA enabled, the driver will expose the full mode list a display
supports, regardless of any BW limitation on a shared (Thunderbolt)
link. Such BW limits will be checked against only during a modeset, when
the driver has the full knowledge of each display's BW requirement.

If the link BW changes in a way that a connector's modelist may also
change, userspace will get a hotplug notification for all the connectors
sharing the same link (so it can adjust the mode used for a display).

The BW limitation can change at any point, asynchronously to modesets
on a given connector, so a modeset can fail even though the atomic check
for it passed. In such scenarios userspace will get a bad link
notification and in response is supposed to retry the modeset.

v2:
- Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state().
  (Ville)
- Fix propagating the error from
  intel_dp_tunnel_atomic_compute_stream_bw(). (Ville)
- Move tunnel==NULL checks from driver to DRM core helpers. (Ville)
- Simplify return flow from intel_dp_tunnel_detect(). (Ville)
- s/dp_tunnel_state/inherited_dp_tunnels (Ville)
- Simplify struct intel_dp_tunnel_inherited_state. (Ville)
- Unconstify object pointers (vs. states) where possible. (Ville)
- Init crtc_state while declaring it in check_group_state(). (Ville)
- Join obj->base.id, obj->name arg lines in debug prints to reduce LOC.
  (Ville)
- Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the
  BW allocation from encoder hooks up to intel_atomic_commit_tail()
  later in the patchset.
- Disable BW alloc mode during system suspend.
- Allocate the required BW for all tunnels during system resume.
- Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded
  sequence in a follow-up patch.
- Add function documentation to all exported functions.
- Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL.

v3:
- Rebase on intel_dp_get_active_pipes() change in previous patch.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-4-imre.deak@intel.com

drm/i915/dp: Sync instead of try-sync commits when getting active pipes

Sync instead of only try-sync non-blocking commits when getting the
active pipes through a given DP port. Atm intel_dp_get_active_pipes()
will only try to sync a given pipe and if that would block ignore the
pipe. This was supposed to avoid link retraining in case a pending
modeset would do that anyway, however that could incorrectly ignore
fastset pipes as well for instance (which don't retraing the link).
The TC port reset path needs to handle all pipes, even if a waiting for
a pending commit would block. To account for the above cases sync all
the pipes unconditionally.

This also prepares for a follow-up change enabling the DP tunnel BW
allocation mode which needs to ensure that all active pipes are synced
and returned from intel_dp_get_active_pipes().

v2:
- Add a separate function to try-sync the pipes. (Ville)
v3:
- Just sync the pipes unconditionally in intel_dp_get_active_pipes().
(Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-3-imre.deak@intel.com

drm/i915/dp: Add intel_dp_max_link_data_rate()

Add intel_dp_max_link_data_rate() to get the link BW vs. the sink DPRX
BW used by a follow-up patch enabling the DP tunnel BW allocation mode.
The link BW can be below the DPRX BW due to a BW limitation on a link
shared by multiple sinks.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-11-imre.deak@intel.com

drm/i915/dp: Factor out intel_dp_read_dprx_caps()

Factor out a function to read the sink's DPRX capabilities used by a
follow-up patch enabling the DP tunnel BW allocation mode.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-10-imre.deak@intel.com

drm/i915/dp: Factor out intel_dp_update_sink_caps()

Factor out a function updating the sink's link rate and lane count
capabilities, used by a follow-up patch enabling the DP tunnel BW
allocation mode.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-9-imre.deak@intel.com

drm/i915/dp: Export intel_dp_max_common_rate/lane_count()

Export intel_dp_max_common_rate() and intel_dp_max_lane_count() used by
a follow-up patch enabling the DP tunnel BW allocation mode.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-8-imre.deak@intel.com

drm/i915/dp: Factor out intel_dp_config_required_rate()

Factor out intel_dp_config_required_rate() used by a follow-up patch
enabling the DP tunnel BW allocation mode.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-7-imre.deak@intel.com

drm/i915/dp: Use drm_dp_max_dprx_data_rate()

Instead of intel_dp_max_data_rate() use the equivalent
drm_dp_max_dprx_data_rate() which was copied from the former one in a
previous patch.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-6-imre.deak@intel.com

drm/i915/dp: Add support to notify MST connectors to retry modesets

On shared (Thunderbolt) links with DP tunnels, the modeset may need to
be retried on all connectors on the link due to a link BW limitation
arising only after the atomic check phase. To support this add a helper
function queuing a work to retry the modeset on a given port's connector
and at the same time any MST connector with streams through the same
port. A follow-up change enabling the DP tunnel Bandwidth Allocation
Mode will take this into use.

v2:
- Send the uevent only to enabled MST connectors. (Jouni)

Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-5-imre.deak@intel.com

drm/i915: Fix display bpp limit computation during system resume

The system resume display mode restoration should happen with an output
configuration matching that of the suspend time saved mode. Since the
restored mode configuration is subject to the bpp fallback logic,
starting out with an unlimited bpp and reducing the bpp as required by
any (MST) link BW limit, the resulting bpp will match the one during
suspend only if the BW limit checks during suspend and resume are
applied in an identical way. The latter is not guaranteed at the moment,
since the pre-suspend MST topology may not be in place during resume
(for instance if the MST sink was disconnected while being suspended),
which makes the MST link BW check accept the unlimited bpp mode
configuration unconditionally without ensuring that the required BW fits
into the available MST link BW.

To fix the above, initialize the bpp fallback logic with the max link
bpp / force-FEC limits left behind by the suspend time mode save.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-4-imre.deak@intel.com

drm/dp: Add support for DP tunneling

Add support for Display Port tunneling. For now this includes the
support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay
support for later.

BWA allows using displays that share the same (Thunderbolt) link with
their maximum resolution. Atm, this may not be possible due to the
coarse granularity of partitioning the link BW among the displays on the
link: the BW allocation policy is in a SW/FW/HW component on the link
(on Thunderbolt it's the SW or FW Connection Manager), independent of
the driver. This policy will set the DPRX maximum rate and lane count
DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200,
0x02201) based on the available link BW.

The granularity of the current BW allocation policy is coarse, based on
the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent
using higher resolutions all together: the display connected first will
get a share of the link BW which corresponds to its full DPRX capability
(regardless of the actual mode it uses). A subsequent display connected
will only get the remaining BW, which could be well below its full
capability.

BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps
range) and first-come/first-served issues by letting the driver request
the BW for each display on a link which reflects the actual modes the
displays use.

This patch adds the DRM core helper functions, while a follow-up change
in the patchset takes them into use in the i915 driver.

v2:
- Fix prepare_to_wait vs. wake-up cond check order in
  allocate_tunnel_bw(). (Ville)
- Move tunnel==NULL checks from callers in drivers to here. (Ville)
- Avoid var inits in declaration blocks that can fail or have
  side-effects. (Ville)
- Use u8 for driver and group IDs. (Ville)
- Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville)
- Reuse str_yes_no() instead of a local yes_no_chr(). (Ville)
- s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport
  the function. (Ville)
- s/clear_tunnel_group_state()/free_group_state() and move kfree() to
  this function. (Ville)
- Add separate group_free_bw() helper and describe what the tunnel
  estimated BW includes. (Ville)
- Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville)
- Add code comment explaining the purpose of DPCD reg read helpers.
  (Ville)
- Add code comment describing the tunnel group name prefix format.
  (Ville)
- Report the allocated BW as undetermined until the first allocation
  request.
- Skip allocation requests matching the previous request.
- Clear any stale BW request status flags before a new request.
- Add missing error return check of drm_dp_tunnel_atomic_get_group_state()
  in drm_dp_tunnel_atomic_set_stream_bw().
- Add drm_dp_tunnel_get_allocated_bw().
- s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw
- Fix return value description in function doc of drm_dp_tunnel_detect().
- Add function documentation to all exported functions.

v3:
- Improve grouping of fields in drm_dp_tunnel_group struct. (Uma)
- Fix validating the BW granularity DPCD reg value. (Uma)
- Document return value of check_and_clear_status_change(). (Uma)
- Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put().
  (Ville)
- Allow for ALLOCATED_BW to change after a BWA enable/disable sequence.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com

drm/dp: Add drm_dp_max_dprx_data_rate()

Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().

While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().

v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com

drm/i915/hdcp: Read Rxcaps for robustibility

We see some monitors and docks report incorrect hdcp version
and capability in first few reads so we read rx_caps three times
before we conclude the monitor's or docks HDCP capability

--v2
-Add comment to justify the 3 time read loop for hdcp capability[Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-7-suraj.kandpal@intel.com

drm/i915/hdcp: Allocate stream id after HDCP AKE stage

Allocate stream id after HDCP AKE stage and not before so that it
can also be done during link integrity check.
Right now for MST scenarios LIC fails after hdcp enablement for this
reason.

--v2
-no need for else block in prepare_streams function [Ankit]

--v3
-remove intel_hdcp argument from required_content_stream function
[Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-6-suraj.kandpal@intel.com

drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link

Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP1.4 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-5-suraj.kandpal@intel.com

drm/i915/hdcp: Don't enable HDCP2.2 directly from check_link

Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP2.2 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.

--v2
-Don't change the function prototype in this function [Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-4-suraj.kandpal@intel.com

drm/i915/hdcp: Extract hdcp structure from correct connector

Currently intel_hdcp is not being extracted from primary connector
this patch fixes that.

Fixes: 524240b231ea ("drm/i915/hdcp: Propagate aux info in DP HDCP functions")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-3-suraj.kandpal@intel.com

drm/i915/hdcp: Remove additional timing for reading mst hdcp message

Now that we have moved back to direct reads the additional timing
is not required hence this can be removed.

--v2
-Add Fixes tag [Ankit]

Fixes: 3974f9c17bb9 ("drm/i915/hdcp: Adjust timeout for read in DPMST Scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-10-suraj.kandpal@intel.com

drm/i915/hdcp: HDCP Capability for the downstream device

Currently we are only checking capability of remote device and not
immediate downstream device but during capability check we need are
concerned with only the HDCP capability of downstream device.
During i915_display_info reporting we need HDCP Capability for both
the monitors and downstream branch device if any this patch adds that.

--v2
-Use MST Hub HDCP version [Ankit]

--v3
-Redefined how we seprate remote and direct read to make sure HDMI
shim functions are not touched [Ankit]

--v4
- Fix the conditions so that hdcp_info with remote_req true is sent
only when encoder is mst [Ankit]

--v5
-No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com

drm/i915/hdcp: Add new remote capability check shim function

Create a remote HDCP capability shim function which can read the
remote monitor HDCP capability when in MST configuration.

--v2
-Add an assertion to make sure only mst encoder call this remote_cap
function [Ankit]

--v3
-rename remote_hdcp_cap to remote_hdcp_capability [Jani]

--v4
-fix hdcp2_prerequisite check condition
-Move intel_dp_hdcp_get_remote_capability to dp_mst shim instead of
having it in dp shim [Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226051017.1652970-2-suraj.kandpal@intel.com

drm/i915/hdcp: Rename hdcp capable functions

Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability
and hdcp_2_2_get_capability to properly reflect what these functions
are doing.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com

drm/i915/hdcp: Pass drm_dp_aux to read_bcaps function

Pass drm_dp_aux to intel_dp_hdcp_read_bcaps function
so as to aid in reading the bcaps for the remote monitor
later on.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-6-suraj.kandpal@intel.com

drm/i915/hdcp: Refactor intel_dp_hdcp2_capable

Break intel_dp_hdcp2_capable so that the common the code can be
reused for the remote capability check.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-5-suraj.kandpal@intel.com

drm/i915/hdcp: Move source hdcp2 checks into its own function

Move checks on the source side for HDCP2.2 into its own function
so that they can be used in the HDCP remote capability check
function.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-4-suraj.kandpal@intel.com

drm/i915/hdcp: Move to direct reads for HDCP

Even for MST scenarios we need to do direct reads only on the
immediate downstream device the rest of the authentication is taken
care by that device. Remote reads will only be used to check
capability of the monitors in MST topology.

--v2
-Add fixes tag [Ankit]
-Derive aux where needed rather than through a function [Ankit]

Fixes: ae4f902bb344 ("drm/i915/hdcp: Send the correct aux for DPMST HDCP scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-3-suraj.kandpal@intel.com

drm/i915/display/debugfs: New entry "DRRS capable" to i915_drrs_status

If the connected panel supports both DRRS & PSR, driver gives preference
to PSR ("DRRS enabled: no"). Even though the hardware supports DRRS,
IGT treats ("DRRS enabled: yes") as not capable.

Introduce a new entry "DRRS capable" to debugfs i915_drrs_status, so
that IGT will read the DRRS capability as "DRRS capable: yes".

Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221111223.2313692-1-bhanuprakash.modem@intel.com

drm/i915: Fix doc build issue on intel_cdclk.c

Fixing some doc build issues:

Documentation/gpu/i915:222: drivers/gpu/drm/i915/display/intel_cdclk.c:69: ERROR: Unexpected indentation.
Documentation/gpu/i915:222: ./drivers/gpu/drm/i915/display/intel_cdclk.c:70: WARNING: Block quote ends without a blank line; unexpected unindent.

v2: Minimize the empty lines (Gustavo)

Closes: https://lore.kernel.org/all/20240219161747.0e867406@canb.auug.org.au/
Fixes: 79e2ea2eaaa6 ("drm/i915/cdclk: Document CDCLK update methods")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221155453.94208-1-rodrigo.vivi@intel.com

drm/i915/lnl: Program PKGC_LATENCY register

If fixed refresh rate program the PKGC_LATENCY register
with the highest latency from level 1 and above LP registers
and program ADDED_WAKE_TIME = DSB execution time.
else program PKGC_LATENCY with all 1's and ADDED_WAKE_TIME as 0.
This is used to improve package C residency by sending the highest
latency tolerance requirement (LTR) when the planes are done with the
frame until the next frame programming window (set context latency,
window 2) starts.
Bspec: 68986

--v2
-Fix indentation [Chaitanya]

--v3
-Take into account if fixed refrersh rate or not [Vinod]
-Added wake time dependengt on DSB execution time [Vinod]
-Use REG_FIELD_PREP [Jani]
-Call program_pkgc_latency from appropriate place [Jani]
-no need for the ~0 while setting max latency [Jani]
-change commit message to add the new changes made in.

--v4
-Remove extra blank line [Vinod]
-move the vrr.enable check to previous loop [Vinod]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219063638.1467114-1-suraj.kandpal@intel.com

drm/i915/lnl: Add pkgc related register

Add the register that needs to read and written onto for
deep pkgc programming.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201085158.1000285-2-suraj.kandpal@intel.com

drm/i915/tv: Fix TV mode

Commit 1fd4a5a36f9f ("drm/connector: Rename legacy TV property") failed
to update all the users of the struct drm_tv_connector_state mode field,
which resulted in a build failure in i915.

However, a subsequent commit in the same series reintroduced a mode
field in that structure, with a different semantic but the same type,
with the assumption that all previous users were updated.

Since that didn't happen, the i915 driver now compiles, but mixes
accesses to the legacy_mode field and the newer mode field, but with the
previous semantics.

This obviously doesn't work very well, so we need to update the accesses
that weren't in the legacy renaming commit.

Fixes: 1fd4a5a36f9f ("drm/connector: Rename legacy TV property")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220131251.453060-1-mripard@kernel.org

drm/i915: remove intel_memory_region_ops::flags

intel_memory_region_ops::flags was never used since its addition in
commit 232a6ebae419 (drm/i915: introduce intel_memory_region). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-22-jirislaby@kernel.org

drm/i915: remove i915_vma::obj_hash

i915_vma::obj_hash was never used since its addition in commit
4ff4b44cbb70 (drm/i915: Store a direct lookup from object handle to
vma). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-21-jirislaby@kernel.org

drm/i915: remove execute_cb::signal

execute_cb::signal is not used since commit 5ac545b8b014
(drm/i915/request: Remove the hook from await_execution). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-20-jirislaby@kernel.org

drm/i915: remove intel_gvt_irq::pending_events

intel_gvt_irq::pending_events was never used since its addition in
commit c8fe6a6811a7 (drm/i915/gvt: vGPU interrupt virtualization.).
Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-19-jirislaby@kernel.org

drm/i915: remove intel_gvt_event_info::policy

intel_gvt_event_info::policy was never used since its addition in
commit c8fe6a6811a7 (drm/i915/gvt: vGPU interrupt virtualization.).
Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-18-jirislaby@kernel.org

drm/i915: remove intel_gvt_irq_info::warned

intel_gvt_irq_info::warned was never used since its addition in commit
c8fe6a6811a7 (drm/i915/gvt: vGPU interrupt virtualization.). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-17-jirislaby@kernel.org

drm/i915: remove gvt_mmio_block::device

gvt_mmio_block::device is not used since commit e0f74ed4634d (i915/gvt:
Separate the MMIO tracking table from GVT-g). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-16-jirislaby@kernel.org

drm/i915: remove intel_vgpu::intx_trigger

intel_vgpu::intx_trigger was never used since its addition in commit
f30437c5e7bf (drm/i915/gvt: add KVMGT support). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-15-jirislaby@kernel.org

drm/i915: remove intel_vgpu_opregion::mapped

intel_vgpu_opregion::mapped is not used since commit 367748066eeb
(drm/i915/gvt: remove enum hypervisor_type). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-14-jirislaby@kernel.org

drm/i915: remove intel_vgpu_fence::base

intel_vgpu_fence::base was never used since its addition in commit
28a60dee2ce6 (drm/i915/gvt: vGPU HW resource management). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-13-jirislaby@kernel.org

drm/i915: remove intel_vgpu_gtt::active_ppgtt_mm_bitmap

intel_vgpu_gtt::active_ppgtt_mm_bitmap was never used since its
addition in commit 2707e4446688 (drm/i915/gvt: vGPU graphics memory
virtualization). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-12-jirislaby@kernel.org

drm/i915: remove i915_perf_stream::size_exponent

i915_perf_stream::size_exponent was never used since its addition in
commit a37f08a882b0 (drm/i915/perf: Refactor oa object to better manage
resources). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-11-jirislaby@kernel.org

drm/i915: remove i915_drm_client::id

i915_drm_client::id is not used since commit e894b724c316 (drm/i915:
Use the fdinfo helper). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-10-jirislaby@kernel.org

drm/i915: remove intel_guc::ads_engine_usage_size

intel_guc::ads_engine_usage_size was never used since its addition in
commit 77cdd054dd2c (drm/i915/pmu: Connect engine busyness stats from
GuC to pmu). Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-9-jirislaby@kernel.org

drm/i915: remove intel_vbt_panel_data::edp::initialized

intel_vbt_panel_data::edp::initialized is not used since commit
9f0e7ff4b366 (drm/i915: fetch eDP configuration data from the VBT).
Drop it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-8-jirislaby@kernel.org

drm/i915: remove intel_vgpu_workload::{ring_context, restore_inhibit}

intel_vgpu_workload::ring_context was never used since its addition in
commit 28c4c6ca7f79 (drm/i915/gvt: vGPU workload submission) and
::restore_inhibit since its addition in commit e473405783c0
(drm/i915/gvt: vGPU workload scheduler). Drop them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-7-jirislaby@kernel.org

drm/i915: remove intel_gvt_mmio_info::{device, addr_range}

intel_gvt_mmio_info::device is not used since commit e0f74ed4634d
(i915/gvt: Separate the MMIO tracking table from GVT-g) and ::addr_range
was never used since its addition in commit 12d14cc43b34 (drm/i915/gvt:
Introduce a framework for tracking HW registers.). Drop them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-6-jirislaby@kernel.org

drm/i915: remove intel_gvt_gtt::{mm_alloc_page_table, mm_free_page_table}

intel_gvt_gtt::{mm_alloc_page_table,mm_free_page_table} are not used
since commit ede9d0cfcb78 (drm/i915/gvt: Rework shadow graphic memory
management code). Drop them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-5-jirislaby@kernel.org

drm/i915: remove intel_dsi::{port_bits,hs}

intel_dsi::port_bits is unused since commit 369602d370fa (drm/i915: Add
support for port enable/disable for dual link configuration) and ::hs is
unused likely since commit 063c86f60ad4 (drm/i915/dsi: remove
intel_dsi_cmd.c and the unused functions therein). Drop them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-4-jirislaby@kernel.org

drm/i915: remove structs intel_vgpu_pipe_format and intel_vgpu_fb_format

Both struct intel_vgpu_pipe_format and intel_vgpu_fb_format were never
used since its addition in commit 9f31d1063b43 (drm/i915/gvt: Add
framebuffer decoder support). Drop them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-3-jirislaby@kernel.org

drm/i915: remove unused intel_dvo_dev_ops hooks

struct intel_dvo_dev_ops's ::create_resources(), ::prepare(),
::commit::, and get_modes() are all unused since their addition in
79e539453b34 (DRM: i915: add mode setting support). Drop all of them.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-2-jirislaby@kernel.org

drm/i915/cdclk: Document CDCLK update methods

Add a bit of documentation to briefly explain the methods
by which we can change the CDCLK frequency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-5-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>

drm/i915/cdclk: Remove the hardcoded divider from cdclk_compute_crawl_and_squash_midpoint()

cdclk_compute_crawl_and_squash_midpoint() was still assuming
that cd2x divider == 1 (ie. full divider == 2). Remove that
assumption by computing the dividers properly.

We'll also toss in a WARN in case the divider somehow ends
up different between the old and new cdclk configs. That should
never happen given we have div==2 in all the cdclk table entries
for the affected platforms.

If in the future we need a config where the divider also needs
to be changed then we likely need to add an extra step into the
cdclk programming sequence to make sure things stay within
legal limits throughout the process.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-4-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>

drm/i915/cdclk: Squash waveform is 16 bits

Have cdclk_squash_waveform() return a u16 since that's
how many bits we have in the waveform. We alreday use
u16 everywhere else.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-3-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>

drm/i915/cdclk: Extract cdclk_divider()

Extract the cdclk divider calculation into a helper. We'll have
more users of this soon. We can now also get rid of the intermediate
'unsquashed_cdclk' variable.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-2-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>

drm/i915: Enable fastboot across the board

There's nothing magical about vlv+ platforms vs. fastboot.
If it works somewhere it should work everywhere, assuming
we've not missed any crucial state checks. That seems unlikely
on older platforms with less state to check anyway.

Just enable fastboot across the board, and the remove the
remnants of the optional stuff (we already removed the
modparam for fastboot anyway).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Add PLL .compare_hw_state() vfunc

Chunk up the humongous dpll_hw_state comparison check into per-platform
variants, implemented in the dpll_mgr. This is step one in allowing
each platform (or perhaps even PLL) type to have a custom hw state
structure instead of having to smash it all into one.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Reuse ibx_dump_hw_state() for gmch platforms

GMCH platform DPLLs are similar to the IBX+ PCH DPLLs so
we can just use the same state dump function for both.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Include the CRTC name in the ELD buffer mismatch

Most crtc state mismatches include the CRTC id+name in the
prints. Also include it in the ELD buffer mismatch
prints.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Fix PLL state check for gmch platforms

GMCH DPLL state check was mistakenly removed in
commit 87fc875a2b85 ("drm/i915/dg2: Skip shared DPLL handling").
Bring it back.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Update ADL-N PCI IDs

Extend the list of ADL-N PCI IDs to contain two new entries.

Bspec: 68397
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214144629.106702-2-gustavo.sousa@intel.com

drm/i915/display: update pll values in sync with Bspec for MTL

DP/eDP and HDMI C20 PHY PLL values were updated for MTL platform

Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214070930.1028456-1-ravi.kumar.vodapalli@intel.com

drm/i915: Prevent HW access during init from connector get_modes hooks

Prevent accessing the HW from the get_modes hooks of connectors deriving
the mode list from the display's EDID. drm_edid_connector_add_modes()
will return the mode list based on the EDID which was cached during a
previous detection/get_modes call.

This also fixes the NULL deref problem (10085) which was
introduced/revealed by

commit bab87ef4db9a ("drm/i915: Disable hotplug detection handlers during driver init/shutdown")

After the above change MST connectors will not change state during
driver init/shutdown; thus some of these connectors with no I2C/DDC
adapter registered for them (since the given MST port has no sink
connected) may stay then in the 'unknown' connector status. The
get_modes() hook should not try to use the I2C/DDC adapter in this state
(which would lead to the above NULL deref) which this patch ensures.

v2:
- Remove the redundant check from intel_crt_ddc_get_modes().
- Rebase on latest drm-tip.
- Add Fixes: line / related commit notes.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10085
Fixes: bab87ef4db9a ("drm/i915: Disable hotplug detection handlers during driver init/shutdown")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212175237.2625812-2-imre.deak@intel.com

drm/i915: Prevent HW access during init from SDVO TV get_modes hook

Prevent accessing the HW from the SDVO/TV get_modes connector hook.
Returning 0 from the hook will make the caller -
drm_helper_probe_single_connector_modes() - return a default/EDID
override mode list to users. This matches the case where
intel_sdvo_get_tv_modes() fails to retrieve the current mode list due to
a HW access failure.

v2: Clarify the commit message wrt. which modes get_modes() returns. (Jouni)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212175237.2625812-1-imre.deak@intel.com

drm/i915: Add bigjoiner force enable option to debugfs

For validation purposes, it might be useful to be able to
force Bigjoiner mode, even if current dotclock/resolution
do not require that.
Lets add such to option to debugfs.

v2: - Apparently intel_dp_need_bigjoiner can't be used, when
      debugfs entry is created so lets just check manually
      the DISPLAY_VER.

v3: - Switch to intel_connector from drm_connector(Jani Nikula)
    - Remove redundant modeset lock(Jani Nikula)
    - Use kstrtobool_from_user for boolean value(Jani Nikula)

v4: - Apply the changes to proper function(Jani Nikula)

v5: - Removed unnecessary check from i915_bigjoiner_enable_show
      (Ville Syrjälä)
    - Added eDP connector check to intel_connector_debugfs_add
      (Ville Syrjälä)
    - Removed debug message in order to prevent dmesg flooding
      (Ville Syrjälä)

v6: - Assume now always that m->private is intel_connector
    - Fixed other similar conflicts

v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
    - Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
      manually.(Ville Syrjälä)

v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
      (Jani Nikula)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com

drm/i915/dvo: Use sizeof(*variable) instead of sizeof(type)

Prefer sizeof(*variable) to sizeof(type) to make it a bit
harder to screw things up.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dvo/ns2501: Nuke pointless casts

The dvo 'dev_priv' is void* so no need for an explicit cast.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/wm: Use per-device debugs ilk wm code

Switch to drm_dbg_kms() in the ilk wm code so we see which
device generated the debugs. Need to plumb i915 a bit deeper
to make that happen.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/wm: Use per-device debugs in pre-ilk wm code

Switch to drm_dbg_kms() in the pre-ilk wm code so we see which
device generated the debugs. Need to plumb i915 a bit deeper
to make that happen.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/wm: Pass the whole i915 to intel_get_cxsr_latency()

Just pass the whole i915 to intel_get_cxsr_latency() instead
of having each caller dig out bits and pieces.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdcp: Use per-device debugs

Switch to per-device debugs in the hdcp code so we see at least which
device is involved. Should proably also print the connector/encoder/etc.
in there, but left that for the future.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Use per-device debugs for VBT related stuff

Switch to drm_dbg_kms() in the VBT code so we see which
device generated the debugs. Need to plumb i915 a bit deeper
to make that happen.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Switch to kms debugs

The VBT code is all about displays, so switch to UT_KMS debugs
from UT_DRIVER.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fb: Use per-device debugs

Switch to drm_dbg_kms() in the fb code so we see which
device generated the debugs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/color: Use per-device debugs

Switch to drm_dbg_kms() in the LUT validation code so we see
which device generated the debugs. Need to plumb i915 a bit
deeper to make that happen.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Fix up code alignment

Realign a bunch of code that has become messy.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Convert to per-device debugs

Use drm_dbg_kms() instead of DRM_DEBUG_KMS() in the sdvo code
to get the device name into the debug prints.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Correct for_each_old_global_obj_in_state() arguments

for_each_old_global_obj_in_state() gives us the old state, not the
new state. Correct the name of the macro argument.

Note that while the argument was misnamed the macro did work
correctly regardless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dp: Limit SST link rate to <=8.1Gbps

Limit the link rate to HBR3 or below (<=8.1Gbps) in SST mode.
UHBR (10Gbps+) link rates require 128b/132b channel encoding
which we have not yet hooked up into the SST/no-sideband codepaths.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208154552.14545-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address

Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS
register") defines a new macro to calculate the DSC PPS register
addresses with PPS number as an input. This macro correctly calculates
the addresses till PPS 11 since the addresses increment by 4. So in that
case the following macro works correctly to give correct register
address:

_MMIO(_DSCA_PPS_0 + (pps) * 4)

However after PPS 11, the register address for PPS 12 increments by 12
because of RC Buffer memory allocation in between. Because of this
discontinuity in the address space, the macro calculates wrong addresses
for PPS 12 - 16 resulting into incorrect DSC PPS parameter value
read/writes causing DSC corruption.

This fixes it by correcting this macro to add the offset of 12 for PPS
>=12.

v3: Add correct paranthesis for pps argument (Jani Nikula)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10172
Fixes: bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205204619.1991673-1-navaremanasi@chromium.org

drm/i915/display: On Xe2 always enable decompression with tile4

With Xe2 always treat tile4 as if it was using flat ccs.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202150602.430036-2-juhapekka.heikkila@gmail.com

drm/i915/alpm: Alpm aux wake configuration for lnl

Lunarlake has some configurations in ALPM_CTL register for legacy ALPM as
well. Write these.

Bspec: 71477

v2: move version check to lnl_alpm_configure

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-5-jouni.hogander@intel.com

drm/i915/alpm: Calculate ALPM Entry check

ALPM Entry Check represents the number of lines needed to put the main link
to sleep and keep it in the sleep state before it can be taken out of the
SLEEP state (eDP requires the main link to be in the SLEEP state for a
minimum of 5us).

Bspec: 71477

v2: move display version check into _lnl_compute_alpm_param

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-4-jouni.hogander@intel.com

drm/i915/psr: Add alpm_parameters struct

Add new alpm_parameters struct into intel_psr for all calculated
alpm parameters.

v2: Move alpm_parameters struct definition to intel_psr struct

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-3-jouni.hogander@intel.com

drm/i915/alpm: Add ALPM register definitions

Add ALPM register definitions for Lunar Lake.

v3:
  - Fix ALPM_CTL2_A address
  - Remove duplicate defines
v2:
  - Use REG_BIT instead of BIT
  - Add commit message

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-2-jouni.hogander@intel.com

drm/i915: Annotate more of the BIOS fb takeover failure paths

Annotate a few more of the failure paths on the initial
BIOS fb takeover to avoid having to guess why things
aren't working the way we expect.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-17-ville.syrjala@linux.intel.com

drm/i915: Try to relocate the BIOS fb to the start of ggtt

On MTL the GOP (for whatever reason) likes to bind its framebuffer
high up in the ggtt address space. This can conflict with whatever
ggtt_reserve_guc_top() is trying to do, and the result is that
ggtt_reserve_guc_top() fails and then we proceed to explode when
trying to tear down the driver. Thus far I haven't analyzed what
causes the actual fireworks, but it's not super important as even
if it didn't explode we'd still fail the driver load and the user
would be left with an unusable GPU.

To remedy this (without having to figure out exactly what
ggtt_reserve_guc_top() is trying to achieve) we can attempt to
relocate the BIOS framebuffer to a lower ggtt address. We can do
this at this early point in driver init because nothing else is
supposed to be clobbering the ggtt yet. So we simply change where
in the ggtt we pin the vma, the original PTEs will be left as is,
and the new PTEs will get written with the same dma addresses.
The plane will keep on scanning out from the original PTEs until
we are done with the whole process, and at that point we rewrite
the plane's surface address register to point at the new ggtt
address.

Since we don't need a specific ggtt address for the plane
(apart from needing it to land in the mappable region for
normal stolen objects) we'll just try to pin it without a fixed
offset first. It should end up at the lowest available address
(which really should be 0 at this point in the driver init).
If that fails we'll fall back to just pinning it exactly to the
origianal address.

To make sure we don't accidentlally pin it partially over the
original ggtt range (as that would corrupt the original PTEs)
we reserve the original range temporarily during this process.

v2: Try to pin explicitly to ggtt offset 0 as otherwise DG2 puts it
even higher (atm we have no PIN_LOW flag to force it low)
v3: "fix" xe

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-16-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Tweak BIOS fb reuse check

Currently we assume that we bind the BIOS fb exactly into the same
ggtt address where the BIOS left it. That is about to change, and
in order to keep intel_reuse_initial_plane_obj() working as intended
we need to compare the original ggtt offset (called 'base' here)
as opposed to the actual vma ggtt offset we selected. Otherwise
the first plane could change the ggtt offset, and then subsequent
planes would no longer notice that they are in fact using the same
ggtt offset that the first plane was already using. Thus the reuse
check will fail and we proceed to turn off these subsequent planes.

TODO: would probably make more sense to do the pure readout first
for all the planes, then check for fb reuse, and only then proceed
to pin the object into the final location in the ggtt...

v2: "fix" xe

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-15-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/fbdev: Fix smem_start for LMEMBAR stolen objects

The "io" address of an object is its dma address minus the
region.start. Subtract the latter to make smem_start correct.
The current code happens to work for genuine LMEM objects
as LMEM region.start==0, but for LMEMBAR stolen objects
region.start!=0.

TODO: perhaps just set smem_start=0 always as our .fb_mmap()
implementation no longer depends on it? Need to double check
it's not needed for anything else...

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-14-ville.syrjala@linux.intel.com