Paolo Abeni [Tue, 30 Apr 2024 11:24:50 +0000 (13:24 +0200)]
Merge branch 'net-smc-smc-intra-os-shortcut-with-loopback-ism'
Wen Gu says:
====================
net/smc: SMC intra-OS shortcut with loopback-ism
This patch set acts as the second part of the new version of [1] (The first
part can be referred from [2]), the updated things of this version are listed
at the end.
- Background
SMC-D is now used in IBM z with ISM function to optimize network interconnect
for intra-CPC communications. Inspired by this, we try to make SMC-D available
on the non-s390 architecture through a software-implemented Emulated-ISM device,
that is the loopback-ism device here, to accelerate inter-process or
inter-containers communication within the same OS instance.
- Design
This patch set includes 3 parts:
- Patch #1: some prepare work for loopback-ism.
- Patch #2-#7: implement loopback-ism device and adapt SMC-D for it.
loopback-ism now serves only SMC and no userspace interfaces exposed.
- Patch #8-#11: memory copy optimization for intra-OS scenario.
The loopback-ism device is designed as an ISMv2 device and not be limited to
a specific net namespace, ends of both inter-process connection (1/1' in diagram
below) or inter-container connection (2/2' in diagram below) can find the same
available loopback-ism and choose it during the CLC handshake.
Container 1 (ns1) Container 2 (ns2)
+-----------------------------------------+ +-------------------------+
| +-------+ +-------+ +-------+ | | +-------+ |
| | App A | | App B | | App C | | | | App D |<-+ |
| +-------+ +---^---+ +-------+ | | +-------+ |(2') |
| |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| |
| (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ |
| `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | |
+---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+
| | | |
Kernel | | | |
+----+-------v---+-----------v----------------------------------+---+----+
| | TCP | |
| | | |
| +--------------------------------------------------------------+ |
| |
| +--------------+ |
| | smc loopback | |
+---------------------------+--------------+-----------------------------+
loopback-ism device creates DMBs (shared memory) for each connection peer.
Since data transfer occurs within the same kernel, the sndbuf of each peer
is only a descriptor and point to the same memory region as peer DMB, so that
the data copy from sndbuf to peer DMB can be avoided in loopback-ism case.
Container 1 (ns1) Container 2 (ns2)
+-----------------------------------------+ +-------------------------+
| +-------+ | | +-------+ |
| | App C |-----+ | | | App D | |
| +-------+ | | | +-^-----+ |
| | | | | |
| (2) | | | (2') | |
| | | | | |
+---------------|-------------------------+ +----------|--------------+
| |
Kernel | |
+---------------|-----------------------------------------|--------------+
| +--------+ +--v-----+ +--------+ +--------+ |
| |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| |
| +-----|--+ +--|-----+ +-----|--+ +--------+ |
| +-----|--+ | +-----|--+ |
| | DMB C | +---------------------------------| DMB D | |
| +--------+ +--------+ |
| |
| +--------------+ |
| | smc loopback | |
+---------------------------+--------------+-----------------------------+
- Benchmark Test
* Test environments:
- VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem.
- SMC sndbuf/DMB size 1MB.
* Test object:
- TCP: run on TCP loopback.
- SMC lo: run on SMC loopback-ism.
1. ipc-benchmark (see [3])
- ./<foo> -c
1000000 -s 100
TCP SMC-lo
Message
rate (msg/s) 84991 151293(+78.01%)
2. sockperf
- serv: <smc_run> sockperf sr --tcp
- clnt: <smc_run> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30
TCP SMC-lo
Bandwidth(MBps) 5033.569 7987.732(+58.69%)
Latency(us) 5.986 3.398(-43.23%)
3. nginx/wrk
- serv: <smc_run> nginx
- clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80
TCP SMC-lo
Requests/s 187951.76 267107.90(+42.12%)
4. redis-benchmark
- serv: <smc_run> redis-server
- clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024
TCP SMC-lo
GET(Requests/s) 86132.64 118133.49(+37.15%)
SET(Requests/s) 87374.40 122887.86(+40.65%)
Change log:
v7->v6
- Patch #2: minor: remove unnecessary 'return' of inline smc_loopback_exit().
- Patch #10: minor: directly return 0 instead of 'rc' in smcd_cdc_msg_send().
- all: collect the Reviewed-by tags.
v6->RFC v5
Link: https://lore.kernel.org/netdev/20240414040304.54255-1-guwen@linux.alibaba.com/
- Patch #2: make the use of CONFIG_SMC_LO cleaner.
- Patch #5: mark some smcd_ops that loopback-ism doesn't support as
optional and check for the support when they are called.
- Patch #7: keep loopback-ism at the beginning of the SMC-D device list.
- Some expression changes in commit logs and comments.
RFC v5->RFC v4:
Link: https://lore.kernel.org/netdev/20240324135522.108564-1-guwen@linux.alibaba.com/
- Patch #2: minor changes in description of config SMC_LO and comments.
- Patch #10: minor changes in comments and if(smc_ism_support_dmb_nocopy())
check in smcd_cdc_msg_send().
- Patch #3: change smc_lo_generate_id() to smc_lo_generate_ids() and SMC_LO_CHID
to SMC_LO_RESERVED_CHID.
- Patch #5: memcpy while holding the ldev->dmb_ht_lock.
- Some expression changes in commit logs.
RFC v4->v3:
Link: https://lore.kernel.org/netdev/20240317100545.96663-1-guwen@linux.alibaba.com/
- The merge window of v6.9 is open, so post this series as an RFC.
- Patch #6: since some information fed back by smc_nl_handle_smcd_dev() dose
not apply to Emulated-ISM (including loopback-ism here), loopback-ism is
not exposed through smc netlink for the time being. we may refactor this
part when smc netlink interface is updated.
v3->v2:
Link: https://lore.kernel.org/netdev/20240312142743.41406-1-guwen@linux.alibaba.com/
- Patch #11: use tasklet_schedule(&conn->rx_tsklet) instead of smcd_cdc_rx_handler()
to avoid possible recursive locking of conn->send_lock and use {read|write}_lock_bh()
to acquire dmb_ht_lock.
v2->v1:
Link: https://lore.kernel.org/netdev/20240307095536.29648-1-guwen@linux.alibaba.com/
- All the patches: changed the term virtual-ISM to Emulated-ISM as defined by SMCv2.1.
- Patch #3: optimized the description of SMC_LO config. Avoid exposing loopback-ism
to sysfs and remove all the knobs until future definition clear.
- Patch #3: try to make lockdep happy by using read_lock_bh() in smc_lo_move_data().
- Patch #6: defaultly use physical contiguous DMB buffers.
- Patch #11: defaultly enable DMB no-copy for loopback-ism and free the DMB in
unregister_dmb or detach_dmb when dmb_node->refcnt reaches 0, instead of using
wait_event to keep waiting in unregister_dmb.
v1->RFC:
Link: https://lore.kernel.org/netdev/20240111120036.109903-1-guwen@linux.alibaba.com/
- Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics:
/sys/devices/virtual/smc/loopback-ism/xfer_bytes
- Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports
merging sndbuf with peer DMB.
- Patch #13 & #14: introduce loopback-ism device control of DMB memory type and
control of whether to merge sndbuf and DMB. They can be respectively set by:
/sys/devices/virtual/smc/loopback-ism/dmb_type
/sys/devices/virtual/smc/loopback-ism/dmb_copy
The motivation for these two control is that a performance bottleneck was
found when using vzalloced DMB and sndbuf is merged with DMB, and there are
many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused
by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg()
or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the
vmap lock contention [6]. It has significant effects, but using virtual memory
still has additional overhead compared to using physical memory.
So this new version provides controls of dmb_type and dmb_copy to suit
different scenarios.
- Some minor changes and comments improvements.
RFC->old version([1]):
Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/
- Patch #1: improve the loopback-ism dump, it shows as follows now:
# smcd d
FID Type PCI-ID PCHID InUse #LGs PNET-ID
0000 0 loopback-ism ffff No 0
- Patch #3: introduce the smc_ism_set_v2_capable() helper and set
smc_ism_v2_capable when ISMv2 or virtual ISM is registered,
regardless of whether there is already a device in smcd device list.
- Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/.
- Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active
to activate or deactivate the loopback-ism.
- Patch #9: introduce the statistics of loopback-ism by
/sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}.
- Some minor changes and comments improvements.
[1] https://lore.kernel.org/netdev/
1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/
[2] https://lore.kernel.org/netdev/
20231219142616.80697-1-guwen@linux.alibaba.com/
[3] https://github.com/goldsborough/ipc-bench
[4] https://lore.kernel.org/all/
3189e342-c38f-6076-b730-
19a6efd732a5@linux.alibaba.com/
[5] https://lore.kernel.org/all/
238e63cd-e0e8-4fbf-852f-
bc4d5bc35d5a@linux.alibaba.com/
[6] https://lore.kernel.org/all/
20240102184633.748113-1-urezki@gmail.com/
====================
Link: https://lore.kernel.org/r/20240428060738.60843-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:38 +0000 (14:07 +0800)]
net/smc: implement DMB-merged operations of loopback-ism
This implements operations related to merging sndbuf with peer DMB in
loopback-ism. The DMB won't be freed until no sndbuf is attached to it.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:37 +0000 (14:07 +0800)]
net/smc: adapt cursor update when sndbuf and peer DMB are merged
If the local sndbuf shares the same physical memory with peer DMB,
the cursor update processing needs to be adapted to ensure that the
data to be consumed won't be overwritten.
So in this case, the fin_curs and sndbuf_space that were originally
updated after sending the CDC message should be modified to not be
update until the peer updates cons_curs.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:36 +0000 (14:07 +0800)]
net/smc: {at|de}tach sndbuf to peer DMB if supported
If the device used by SMC-D supports merging local sndbuf to peer DMB,
then create sndbuf descriptor and attach it to peer DMB once peer
token is obtained, and detach and free the sndbuf descriptor when the
connection is freed.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:35 +0000 (14:07 +0800)]
net/smc: add operations to merge sndbuf with peer DMB
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:34 +0000 (14:07 +0800)]
net/smc: register loopback-ism into SMC-D device list
After the loopback-ism device is ready, add it to the SMC-D device list
as an ISMv2 device, and always keep it at the beginning to ensure it is
preferred for providing a shortcut for data transfer within the same
kernel.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:33 +0000 (14:07 +0800)]
net/smc: ignore loopback-ism when dumping SMC-D devices
Since loopback-ism is not a PCI device, the PCI information fed back by
smc_nl_handle_smcd_dev() does not apply to loopback-ism. So currently
ignore loopback-ism when dumping SMC-D devices. The netlink function of
loopback-ism will be refactored when SMC netlink interface is updated.
Link: https://lore.kernel.org/r/caab067b-f5c3-490f-9259-262624c236b4@linux.ibm.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:32 +0000 (14:07 +0800)]
net/smc: mark optional smcd_ops and check for support when called
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:31 +0000 (14:07 +0800)]
net/smc: implement DMB-related operations of loopback-ism
This implements DMB (un)registration and data move operations of
loopback-ism device.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:30 +0000 (14:07 +0800)]
net/smc: implement ID-related operations of loopback-ism
This implements operations related to IDs for the loopback-ism device.
loopback-ism uses an Extended GID that is a 128-bit GID instead of the
existing ISM 64-bit GID, and uses the CHID defined with the reserved
value 0xFFFF.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:29 +0000 (14:07 +0800)]
net/smc: introduce loopback-ism for SMC intra-OS shortcut
This introduces a kind of Emulated-ISM device named loopback-ism for
SMCv2.1. The loopback-ism device is currently exclusive for SMC usage,
and aims to provide an SMC shortcut for sockets within the same kernel,
leading to improved intra-OS traffic performance. Configuration of this
feature is managed through the config SMC_LO.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Sun, 28 Apr 2024 06:07:28 +0000 (14:07 +0800)]
net/smc: decouple ism_client from SMC-D DMB registration
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Erick Archer [Sat, 27 Apr 2024 17:23:36 +0000 (19:23 +0200)]
sctp: prefer struct_size over open coded arithmetic
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "ids" variable is a pointer to "struct sctp_assoc_ids" and this
structure ends in a flexible array:
struct sctp_assoc_ids {
[...]
sctp_assoc_t gaids_assoc_id[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + size * count" in
the kmalloc() function.
Also, refactor the code adding the "ids_size" variable to avoid sizing
twice.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/PAXPR02MB724871DB78375AB06B5171C88B152@PAXPR02MB7248.eurprd02.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 30 Apr 2024 08:51:36 +0000 (10:51 +0200)]
Merge branch 'virtio-net-support-device-stats'
Xuan Zhuo says:
====================
virtio-net: support device stats
https://github.com/oasis-tcs/virtio-spec/commit/
42f389989823039724f95bbbd243291ab0064f82
The virtio net supports to get device stats.
====================
Link: https://lore.kernel.org/r/20240426033928.77778-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:28 +0000 (11:39 +0800)]
virtio-net: support queue stat
To enhance functionality, we now support reporting statistics through
the netdev-generic netlink (netdev-genl) queue stats interface. However,
this does not extend to all statistics, so a new field, qstat_offset,
has been introduced. This field determines which statistics should be
reported via netdev-genl queue stats.
Given that queue stats are retrieved individually per queue, it's
necessary for the virtnet_get_hw_stats() function to be capable of
fetching statistics for a specific queue.
As the document https://docs.kernel.org/next/networking/statistics.html#notes-for-driver-authors
We should not duplicate the stats which get reported via the netlink API in
ethtool. If the stats are for queue stat, that will not be reported by
ethtool -S.
python3 ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml
--dump qstats-get --json '{"scope": "queue"}'
[{'ifindex': 2,
'queue-id': 0,
'queue-type': 'rx',
'rx-bytes':
157844011,
'rx-csum-bad': 0,
'rx-csum-none': 0,
'rx-csum-unnecessary':
2195386,
'rx-hw-drop-overruns': 0,
'rx-hw-drop-ratelimits': 0,
'rx-hw-drops': 12964,
'rx-packets': 598929},
{'ifindex': 2,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes':
1938511,
'tx-csum-none': 0,
'tx-hw-drop-errors': 0,
'tx-hw-drop-ratelimits': 0,
'tx-hw-drops': 0,
'tx-needs-csum': 61263,
'tx-packets': 15515}]
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:27 +0000 (11:39 +0800)]
netdev: add queue stats
These stats are commonly. Support reporting those via netdev-genl queue
stats.
name: rx-hw-drops
name: rx-hw-drop-overruns
name: rx-csum-unnecessary
name: rx-csum-none
name: rx-csum-bad
name: rx-hw-gro-packets
name: rx-hw-gro-bytes
name: rx-hw-gro-wire-packets
name: rx-hw-gro-wire-bytes
name: rx-hw-drop-ratelimits
name: tx-hw-drops
name: tx-hw-drop-errors
name: tx-csum-none
name: tx-needs-csum
name: tx-hw-gso-packets
name: tx-hw-gso-bytes
name: tx-hw-gso-wire-packets
name: tx-hw-gso-wire-bytes
name: tx-hw-drop-ratelimits
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:26 +0000 (11:39 +0800)]
virtio_net: add the total stats field
Now, we just show the stats of every queue.
But for the user, the total values of every stat may are valuable.
NIC statistics:
rx_packets: 373522
rx_bytes:
85919736
rx_drops: 0
rx_xdp_packets: 0
rx_xdp_tx: 0
rx_xdp_redirects: 0
rx_xdp_drops: 0
rx_kicks: 11125
rx_hw_notifications: 0
rx_hw_packets:
1325870
rx_hw_bytes:
263348963
rx_hw_interrupts: 0
rx_hw_drops: 1451
rx_hw_drop_overruns: 0
rx_hw_csum_valid:
1325870
rx_hw_needs_csum:
1325870
rx_hw_csum_none: 0
rx_hw_csum_bad: 0
rx_hw_ratelimit_packets: 0
rx_hw_ratelimit_bytes: 0
tx_packets: 10050
tx_bytes:
1230176
tx_xdp_tx: 0
tx_xdp_tx_drops: 0
tx_kicks: 10050
tx_timeouts: 0
tx_hw_notifications: 0
tx_hw_packets: 32281
tx_hw_bytes:
4315590
tx_hw_interrupts: 0
tx_hw_drops: 0
tx_hw_drop_malformed: 0
tx_hw_csum_none: 0
tx_hw_needs_csum: 32281
tx_hw_ratelimit_packets: 0
tx_hw_ratelimit_bytes: 0
rx0_packets: 373522
rx0_bytes:
85919736
rx0_drops: 0
rx0_xdp_packets: 0
rx0_xdp_tx: 0
rx0_xdp_redirects: 0
rx0_xdp_drops: 0
rx0_kicks: 11125
rx0_hw_notifications: 0
rx0_hw_packets:
1325870
rx0_hw_bytes:
263348963
rx0_hw_interrupts: 0
rx0_hw_drops: 1451
rx0_hw_drop_overruns: 0
rx0_hw_csum_valid:
1325870
rx0_hw_needs_csum:
1325870
rx0_hw_csum_none: 0
rx0_hw_csum_bad: 0
rx0_hw_ratelimit_packets: 0
rx0_hw_ratelimit_bytes: 0
tx0_packets: 10050
tx0_bytes:
1230176
tx0_xdp_tx: 0
tx0_xdp_tx_drops: 0
tx0_kicks: 10050
tx0_timeouts: 0
tx0_hw_notifications: 0
tx0_hw_packets: 32281
tx0_hw_bytes:
4315590
tx0_hw_interrupts: 0
tx0_hw_drops: 0
tx0_hw_drop_malformed: 0
tx0_hw_csum_none: 0
tx0_hw_needs_csum: 32281
tx0_hw_ratelimit_packets: 0
tx0_hw_ratelimit_bytes: 0
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:25 +0000 (11:39 +0800)]
virtio_net: device stats helpers support driver stats
In the last commit, we introduced some helpers for device stats.
And the drivers stats are realized by the open code.
This commit make the helpers to support driver stats.
Then we can have the unify helper for device and driver stats.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:24 +0000 (11:39 +0800)]
virtio_net: support device stats
As the spec https://github.com/oasis-tcs/virtio-spec/commit/
42f389989823039724f95bbbd243291ab0064f82
make virtio-net support getting the stats from the device by ethtool -S
<eth0>.
NIC statistics:
rx0_packets: 582951
rx0_bytes:
155307077
rx0_drops: 0
rx0_xdp_packets: 0
rx0_xdp_tx: 0
rx0_xdp_redirects: 0
rx0_xdp_drops: 0
rx0_kicks: 17007
rx0_hw_packets:
2179409
rx0_hw_bytes:
510015040
rx0_hw_notifications: 0
rx0_hw_interrupts: 0
rx0_hw_needs_csum:
2179409
rx0_hw_ratelimit_bytes: 0
tx0_packets: 15361
tx0_bytes:
1918970
tx0_xdp_tx: 0
tx0_xdp_tx_drops: 0
tx0_kicks: 15361
tx0_timeouts: 0
tx0_hw_packets: 32272
tx0_hw_bytes:
4311698
tx0_hw_notifications: 0
tx0_hw_interrupts: 0
tx0_hw_ratelimit_bytes: 0
The follow stats are hidden, there are exported by the queue stat API
in the subsequent comment.
VIRTNET_STATS_DESC_RX(basic, drops)
VIRTNET_STATS_DESC_RX(basic, drop_overruns),
VIRTNET_STATS_DESC_TX(basic, drops),
VIRTNET_STATS_DESC_TX(basic, drop_malformed),
VIRTNET_STATS_DESC_RX(csum, csum_valid),
VIRTNET_STATS_DESC_RX(csum, csum_none),
VIRTNET_STATS_DESC_RX(csum, csum_bad),
VIRTNET_STATS_DESC_TX(csum, needs_csum),
VIRTNET_STATS_DESC_TX(csum, csum_none),
VIRTNET_STATS_DESC_RX(gso, gso_packets),
VIRTNET_STATS_DESC_RX(gso, gso_bytes),
VIRTNET_STATS_DESC_RX(gso, gso_packets_coalesced),
VIRTNET_STATS_DESC_RX(gso, gso_bytes_coalesced),
VIRTNET_STATS_DESC_TX(gso, gso_packets),
VIRTNET_STATS_DESC_TX(gso, gso_bytes),
VIRTNET_STATS_DESC_TX(gso, gso_segments),
VIRTNET_STATS_DESC_TX(gso, gso_segments_bytes),
VIRTNET_STATS_DESC_RX(speed, ratelimit_packets),
VIRTNET_STATS_DESC_TX(speed, ratelimit_packets),
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:23 +0000 (11:39 +0800)]
virtio_net: remove "_queue" from ethtool -S
The key size of ethtool -S is controlled by this macro.
ETH_GSTRING_LEN 32
That includes the \0 at the end. So the max length of the key name must
is 31. But the length of the prefix "rx_queue_0_" is 11. If the queue
num is larger than 10, the length of the prefix is 12. So the
key name max is 19. That is too short. We will introduce some keys
such as "gso_packets_coalesced". So we should change the prefix
to "rx0_".
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:22 +0000 (11:39 +0800)]
virtio_net: introduce device stats feature and structures
The virtio-net device stats spec:
https://github.com/oasis-tcs/virtio-spec/commit/
42f389989823039724f95bbbd243291ab0064f82
We introduce the relative feature and structures.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo [Fri, 26 Apr 2024 03:39:21 +0000 (11:39 +0800)]
virtio_net: introduce ability to get reply info from device
As the spec https://github.com/oasis-tcs/virtio-spec/commit/
42f389989823039724f95bbbd243291ab0064f82
Based on the description provided in the above specification, we have
enabled the virtio-net driver to support acquiring some response
information from the device via the CVQ (Control Virtqueue).
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King (Oracle) [Fri, 26 Apr 2024 16:18:08 +0000 (17:18 +0100)]
net: txgbe: use phylink_pcs_change() to report PCS link change events
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/E1s0OH2-009hgx-Qw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:18:03 +0000 (17:18 +0100)]
net: prestera: use phylink_pcs_change() to report PCS link change events
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGx-009hgr-NP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:17:58 +0000 (17:17 +0100)]
net: mvneta: use phylink_pcs_change() to report PCS link change events
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGs-009hgl-Jg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:17:53 +0000 (17:17 +0100)]
net: mvpp2: use phylink_pcs_change() to report PCS link change events
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGn-009hgf-G6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 26 Apr 2024 16:33:55 +0000 (16:33 +0000)]
net: hsr: init prune_proxy_timer sooner
We must initialize prune_proxy_timer before we attempt
a del_timer_sync() on it.
syzbot reported the following splat:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 11 Comm: kworker/u8:1 Not tainted
6.9.0-rc5-syzkaller-01199-gfc48de77d69d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
assign_lock_key+0x238/0x270 kernel/locking/lockdep.c:976
register_lock_class+0x1cf/0x980 kernel/locking/lockdep.c:1289
__lock_acquire+0xda/0x1fd0 kernel/locking/lockdep.c:5014
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__timer_delete_sync+0x148/0x310 kernel/time/timer.c:1648
del_timer_sync include/linux/timer.h:185 [inline]
hsr_dellink+0x33/0x80 net/hsr/hsr_netlink.c:132
default_device_exit_batch+0x956/0xa90 net/core/dev.c:11737
ops_exit_list net/core/net_namespace.c:175 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:637
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
ODEBUG: assert_init not available (active state 0) object:
ffff88806d3fcd88 object type: timer_list hint: 0x0
WARNING: CPU: 1 PID: 11 at lib/debugobjects.c:517 debug_print_object+0x17a/0x1f0 lib/debugobjects.c:514
Fixes:
5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240426163355.2613767-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 30 Apr 2024 02:02:38 +0000 (19:02 -0700)]
Merge branch 'net-dsa-microchip-use-phylink_mac_ops-for-ksz-driver'
Russell King says:
====================
net: dsa: microchip: use phylink_mac_ops for ksz driver
This four patch series switches the Microchip KSZ DSA driver to use
phylink_mac_ops support, and for this one we go a little further
beyond a simple conversion. This driver has four distinct cases:
lan937x
ksz9477
ksz8
ksz8830
Three of these cases are handled by shimming the existing DSA calls
through ksz_dev_ops, and the final case is handled through a
conditional in ksz_phylink_mac_config(). These can all be handled
with separate phylink_mac_ops.
To get there, we do a progressive conversion.
Patch 1 removes ksz_dev_ops' phylink_mac_config() method which is
not populated in any of the arrays - and is thus redundant.
Patch 2 switches the driver to use a common set of phylink_mac_ops
for all cases, doing the simple conversion to avoid the DSA shim.
Patch 3 pushes the phylink_mac_ops down to the first three classes
(lan937x, ksz9477, ksz8) adding an appropriate pointer to the
phylink_mac_ops to struct ksz_chip_data, and using that to
populate DSA's ds->phylink_mac_ops pointer. The difference between
each of these are the mac_link_up() method. mac_config() and
mac_link_down() remain common between each at this stage.
Patch 4 splits out ksz8830, which needs different mac_config()
handling, and thus means we have a difference in mac_config()
methods between the now four phylink_mac_ops structures.
Build tested only, with additional -Wunused-const-variable flag.
====================
Link: https://lore.kernel.org/r/ZivP/R1IwKEPb5T6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:08:13 +0000 (17:08 +0100)]
net: dsa: ksz_common: use separate phylink_mac_ops for ksz8830
Use a separate phylink_mac_ops for the KSZ8830 chip-id.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1s0O7R-009gq2-Qm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:08:08 +0000 (17:08 +0100)]
net: dsa: ksz_common: sub-driver phylink ops
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1s0O7M-009gpw-Lj@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:08:03 +0000 (17:08 +0100)]
net: dsa: ksz_common: provide own phylink MAC operations
Convert ksz_common to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7H-009gpq-IF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 26 Apr 2024 16:07:58 +0000 (17:07 +0100)]
net: dsa: ksz_common: remove phylink_mac_config from ksz_dev_ops
The phylink_mac_config function pointer member of struct ksz_dev_ops is
never initialised, so let's remove it to simplify the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7C-009gpk-Dh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 29 Apr 2024 18:59:20 +0000 (11:59 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur [Fri, 26 Apr 2024 14:02:24 +0000 (16:02 +0200)]
net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814
Extend the PTP programmable gpios to implement also PTP_PF_EXTTS
function. The pins can be configured to capture both of rising
and falling edge. Once the event is seen, then an interrupt is
generated and the LTC is saved in the registers.
On lan8814 only GPIO 3 can be configured for this.
This was tested using:
ts2phc -m -l 7 -s generic -f ts2phc.cfg
Where the configuration was the following:
---
[global]
ts2phc.pin_index 3
[eth0]
---
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Apr 2024 12:35:41 +0000 (13:35 +0100)]
Merge branch 'dsa-realtek-leds'
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: fix LED support for rtl8366
This series fixes the LED support for rtl8366. The existing code was not
tested in a device with switch LEDs and it was using a flawed logic.
The driver now keeps the default LED configuration if nothing requests a
different behavior. This may be enough for most devices. This can be
achieved either by omitting the LED from the device-tree or configuring
all LEDs in a group with the default state set to "keep".
The hardware trigger for LEDs in Realtek switches is shared among all
LEDs in a group. This behavior doesn't align well with the Linux LED
API, which controls LEDs individually. Once the OS changes the
brightness of a LED in a group still triggered by the hardware, the
entire group switches to software-controlled LEDs, even for those not
metioned in the device-tree. This shared behavior also prevents
offloading the trigger to the hardware as it would require an
orchestration between LEDs in a group, not currently present in the LED
API.
The assertion of device hardware reset during driver removal was removed
because it was causing an issue with the LED release code. Devres
devices are released after the driver's removal is executed. Asserting
the reset at that point was causing timeout errors during LED release
when it attempted to turn off the LED.
To: Linus Walleij <linus.walleij@linaro.org>
To: Alvin Šipraga <alsi@bang-olufsen.dk>
To: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>
To: Vladimir Oltean <olteanv@gmail.com>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Changes in v2:
- Fixed commit message formatting
- Added GROUP to LED group enum values. With that, moved the code that
disables LED into a new function to keep 80-collumn limit.
- Dropped unused enable argument in rb8366rb_get_port_led()
- Fixed variable order in rtl8366rb_setup_led()
- Removed redundant led group test in rb8366rb_{g,s}et_port_led()
- Initialize ret as 0 in rtl8366rb_setup_leds()
- Updated comments related to LED blinking and setup
- Link to v1: https://lore.kernel.org/r/
20240310-realtek-led-v1-0-
4d9813ce938e@gmail.com
Changes in v1:
- Rebased on new relatek DSA drivers
- Improved commit messages
- Added commit to remove the reset assert during .remove
- Link to RFC: https://lore.kernel.org/r/
20240106184651.3665-1-luizluca@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Sat, 27 Apr 2024 05:11:30 +0000 (02:11 -0300)]
net: dsa: realtek: add LED drivers for rtl8366rb
This commit introduces LED drivers for rtl8366rb, enabling LEDs to be
described in the device tree using the same format as qca8k. Each port
can configure up to 4 LEDs.
If all LEDs in a group use the default state "keep", they will use the
default behavior after a reset. Changing the brightness of one LED,
either manually or by a trigger, will disable the default hardware
trigger and switch the entire LED group to manually controlled LEDs.
Once in this mode, there is no way to revert to hardware-controlled LEDs
(except by resetting the switch).
Software triggers function as expected with manually controlled LEDs.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Sat, 27 Apr 2024 05:11:29 +0000 (02:11 -0300)]
net: dsa: realtek: do not assert reset on remove
The necessity of asserting the reset on removal was previously
questioned, as DSA's own cleanup methods should suffice to prevent
traffic leakage[1].
When a driver has subdrivers controlled by devres, they will be
unregistered after the main driver's .remove is executed. If it asserts
a reset, the subdrivers will be unable to communicate with the hardware
during their cleanup. For LEDs, this means that they will fail to turn
off, resulting in a timeout error.
[1] https://lore.kernel.org/r/
20240123215606.26716-9-luizluca@gmail.com/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Sat, 27 Apr 2024 05:11:28 +0000 (02:11 -0300)]
net: dsa: realtek: keep default LED state in rtl8366rb
This switch family supports four LEDs for each of its six ports. Each
LED group is composed of one of these four LEDs from all six ports. LED
groups can be configured to display hardware information, such as link
activity, or manually controlled through a bitmap in registers
RTL8366RB_LED_0_1_CTRL_REG and RTL8366RB_LED_2_3_CTRL_REG.
After a reset, the default LED group configuration for groups 0 to 3
indicates, respectively, link activity, link at 1000M, 100M, and 10M, or
RTL8366RB_LED_CTRL_REG as 0x5432. These configurations are commonly used
for LED indications. However, the driver was replacing that
configuration to use manually controlled LEDs (RTL8366RB_LED_FORCE)
without providing a way for the OS to control them. The default
configuration is deemed more useful than fixed, uncontrollable turned-on
LEDs.
The driver was enabling/disabling LEDs during port_enable/disable.
However, these events occur when the port is administratively controlled
(up or down) and are not related to link presence. Additionally, when a
port N was disabled, the driver was turning off all LEDs for group N,
not only the corresponding LED for port N in any of those 4 groups. In
such cases, if port 0 was brought down, the LEDs for all ports in LED
group 0 would be turned off. As another side effect, the driver was
wrongly warning that port 5 didn't have an LED ("no LED for port 5").
Since showing the administrative state of ports is not an orthodox way
to use LEDs, it was not worth it to fix it and all this code was
dropped.
The code to disable LEDs was simplified only changing each LED group to
the RTL8366RB_LED_OFF state. Registers RTL8366RB_LED_0_1_CTRL_REG and
RTL8366RB_LED_2_3_CTRL_REG are only used when the corresponding LED
group is configured with RTL8366RB_LED_FORCE and they don't need to be
cleaned. The code still references an LED controlled by
RTL8366RB_INTERRUPT_CONTROL_REG, but as of now, no test device has
actually used it. Also, some magic numbers were replaced by macros.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 26 Apr 2024 15:19:52 +0000 (15:19 +0000)]
ipv6: introduce dst_rt6_info() helper
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Thaler [Fri, 26 Apr 2024 23:11:26 +0000 (16:11 -0700)]
bpf, docs: Clarify PC use in instruction-set.rst
This patch elaborates on the use of PC by expanding the PC acronym,
explaining the units, and the relative position to which the offset
applies.
Signed-off-by: Dave Thaler <dthaler1968@googlemail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240426231126.5130-1-dthaler1968@gmail.com
David S. Miller [Mon, 29 Apr 2024 09:47:05 +0000 (10:47 +0100)]
Merge branch 'mlxsw-events-processing-performance'
Petr Machata says:
====================
mlxsw: Improve events processing performance
Amit Cohen writes:
Spectrum ASICs only support a single interrupt, it means that all the
events are handled by one IRQ (interrupt request) handler.
Currently, we schedule a tasklet to handle events in EQ, then we also use
tasklet for CQ, SDQ and RDQ. Tasklet runs in softIRQ (software IRQ)
context, and will be run on the same CPU which scheduled it. It means that
today we have one CPU which handles all the packets (both network packets
and EMADs) from hardware.
The existing implementation is not efficient and can be improved.
Measuring latency of EMADs in the driver (without the time in FW) shows
that latency is increased by factor of 28 (x28) when network traffic is
handled by the driver.
Measuring throughput in CPU shows that CPU can handle ~35% less packets
of specific flow when corrupted packets are also handled by the driver.
There are cases that these values even worse, we measure decrease of ~44%
packet rate.
This can be improved if network packet and EMADs will be handled in
parallel by several CPUs, and more than that, if different types of traffic
will be handled in parallel. We can achieve this using NAPI.
This set converts the driver to process completions from hardware via NAPI.
The idea is to add NAPI instance per CQ (which is mapped 1:1 to SDQ/RDQ),
which means that each DQ can be handled separately. we have DQ for EMADs
and DQs for each trap group (like LLDP, BGP, L3 drops, etc..). See more
details in commit messages.
An additional improvement which is done as part of this set is related to
doorbells' ring. The idea is to handle small chunks of Rx packets (which
is also recommended using NAPI) and ring doorbells once per chunk. This
reduces the access to hardware which is expensive (time wise) and might
take time because of memory barriers.
With this set we can see better performance.
To summerize:
EMADs latency:
+------------------------------------------------------------------------+
| | Before this set | Now |
|------------------|---------------------------|-------------------------|
| Increased factor | x28 | x1.5 |
+------------------------------------------------------------------------+
Note that we can see even measurements that show better latency when
traffic is handled by the driver.
Throughput:
+------------------------------------------------------------------------+
| | Before this set | Now |
|-------------|----------------------------|-----------------------------|
| Reduced | 35% | 6% |
| packet rate | | |
+------------------------------------------------------------------------+
Additional improvements are planned - use page pool for buffer allocations
and avoid cache miss of each SKB using napi_build_skb().
Patch set overview:
Patches #1-#2 improve access to hardware by reducing dorbells' rings
Patch #3-#4 are preaparations for NAPI usage
Patch #5 converts the driver to use NAPI
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 26 Apr 2024 12:42:26 +0000 (14:42 +0200)]
mlxsw: pci: Use NAPI for event processing
Spectrum ASICs only support a single interrupt, that means that all the
events are handled by one IRQ (interrupt request) handler. Once an
interrupt is received, we schedule tasklet to handle events from EQ and
then schedule tasklets to handle completions from CQs. Tasklet runs in
softIRQ (software IRQ) context, and will be run on the same CPU which
scheduled it. That means that today we use only one CPU to handle all the
packets (both network packets and EMADs) from hardware.
This can be improved using NAPI. The idea is to use NAPI instance per
CQ, which is mapped 1:1 to DQ (RDQ or SDQ). NAPI poll method can be run
in kernel thread, so then the driver will be able to handle WQEs in several
CPUs. Convert the existing code to use NAPI APIs.
Add NAPI instance as part of 'struct mlxsw_pci_queue' and initialize it
as part of CQs initialization. Set the appropriate poll method and dummy
net device, according to queue number, similar to tasklet setup. For CQs
which are used for completions of RDQ, use Rx poll method and
'napi_dev_rx', which is set as 'threaded'. It means that Rx poll method
will run in kernel context, so several RDQs will be handled in parallel.
For CQs which are used for completions of SDQ, use Tx poll method and
'napi_dev_tx', this method will run in softIRQ context, as it is
recommended in NAPI documentation, as Tx packets' processing is short task.
Convert mlxsw_pci_cq_{rx,tx}_tasklet() to poll methods. Handle 'budget'
argument - ignore it in Tx poll method, as it is recommended to not limit
Tx processing. For Rx processing, handle up to 'budget' completions.
Return 'work_done' which is the amount of completions that were handled.
Handle the following cases:
1. After processing 'budget' completions, the driver still has work to do:
Return work-done = budget. In that case, the NAPI instance will be
polled again (without the need to be rescheduled). Do not re-arm the
queue, as NAPI will handle the reschedule, so we do not have to involve
hardware to send an additional interrupt for the completions that should
be processed.
2. Event processing has been completed:
Call napi_complete_done() to mark NAPI processing as completed, which
means that the poll method will not be rescheduled. Re-arm the queue,
as all completions were handled.
In case that poll method handled exactly 'budget' completions, return
work-done = budget -1, to distinguish from the case that driver still
has completions to handle. Otherwise, return the amount of completions
that were handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 26 Apr 2024 12:42:25 +0000 (14:42 +0200)]
mlxsw: pci: Reorganize 'mlxsw_pci_queue' structure
The next patch will set the driver to use NAPI for event processing. Then
tasklet mechanism will be used only for EQ. Reorganize 'mlxsw_pci_queue'
to hold EQ and CQ attributes in a union. For now, add tasklet for both EQ
and CQ. This will be changed in the next patch, as 'tasklet_struct' will be
replaced with NAPI instance.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 26 Apr 2024 12:42:24 +0000 (14:42 +0200)]
mlxsw: pci: Initialize dummy net devices for NAPI
mlxsw will use NAPI for event processing in a next patch. As preparation,
add two dummy net devices and initialize them.
NAPI instance should be attached to net device. Usually each queue is used
by a single net device in network drivers, so the mapping between net
device to NAPI instance is intuitive. In our case, Rx queues are not per
port, they are per trap-group. Tx queues are mapped to net devices, but we
do not have a separate queue for each local port, several ports share the
same queue.
Use init_dummy_netdev() to initialize dummy net devices for NAPI.
To run NAPI poll method in a kernel thread, the net device which NAPI
instance is attached to should be marked as 'threaded'. It is
recommended to handle Tx packets in softIRQ context, as usually this is
a short task - just free the Tx packet which has been transmitted.
Rx packets handling is more complicated task, so drivers can use a
dedicated kernel thread to process them. It allows processing packets from
different Rx queues in parallel. We would like to handle only Rx packets in
kernel threads, which means that we will use two dummy net devices
(one for Rx and one for Tx). Set only one of them with 'threaded' as it
will be used for Rx processing. Do not fail in case that setting 'threaded'
fails, as it is better to use regular softIRQ NAPI rather than preventing
the driver from loading.
Note that the net devices are initialized with init_dummy_netdev(), so
they are not registered, which means that they will not be visible to user.
It will not be possible to change 'threaded' configuration from user
space, but it is reasonable in our case, as there is no another
configuration which makes sense, considering that user has no influence
on the usage of each queue.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 26 Apr 2024 12:42:23 +0000 (14:42 +0200)]
mlxsw: pci: Ring RDQ and CQ doorbells once per several completions
Currently, for each CQE in CQ, we ring CQ doorbell, then handle RDQ and
ring RDQ doorbell. Finally we ring CQ arm doorbell - once per CQ tasklet.
The idea of ringing CQ doorbell before RDQ doorbell, is to be sure that
when we post new WQE (after RDQ is handled), there is an available CQE.
This was done because of a hardware bug as part of
commit
c9ebea04cb1b ("mlxsw: pci: Ring CQ's doorbell before RDQ's").
There is no real reason to ring RDQ and CQ doorbells for each completion,
it is better to handle several completions and reduce number of ringings,
as access to hardware is expensive (time wise) and might take time because
of memory barriers.
A previous patch changed CQ tasklet to handle up to 64 Rx packets. With
this limitation, we can ring CQ and RDQ doorbells once per CQ tasklet.
The counters of the doorbells are increased by the amount of packets
that we handled, then the device will know for which completion to send
an additional event.
To avoid reordering CQ and RDQ doorbells' ring, let the tasklet to ring
also RDQ doorbell, mlxsw_pci_cqe_rdq_handle() handles the counter but
does not ring the doorbell.
Note that with this change there is no need to copy the CQE, as we ring CQ
doorbell only after Rx packet processing (which uses the CQE) is done.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 26 Apr 2024 12:42:22 +0000 (14:42 +0200)]
mlxsw: pci: Handle up to 64 Rx completions in tasklet
We can get many completions in one interrupt. Currently, the CQ tasklet
handles up to half queue size completions, and then arms the hardware to
generate additional events, which means that in case that there were
additional completions that we did not handle, we will get immediately an
additional interrupt to handle the rest.
The decision to handle up to half of the queue size is arbitrary and was
determined in 2015, when mlxsw driver was added to the kernel. One
additional fact that should be taken into account is that while WQEs
from RDQ are handled, the CPU that handles the tasklet is dedicated for
this task, which means that we might hold the CPU for a long time.
Handle WQEs in smaller chucks, then arm CQ doorbell to notify the hardware
to send additional notifications. Set the chunk size to 64 as this number
is recommended using NAPI and the driver will use NAPI in a next patch.
Note that for now we use ARM doorbell to retrigger CQ tasklet, but with
NAPI it will be more efficient as software will reschedule the poll
method and we will not involve hardware for that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 26 Apr 2024 10:47:22 +0000 (10:47 +0000)]
ipv6: use call_rcu_hurry() in fib6_info_release()
This is a followup of commit
c4e86b4363ac ("net: add two more
call_rcu_hurry()")
fib6_info_destroy_rcu() is calling nexthop_put() or fib6_nh_release()
We must not delay it too much or risk unregister_netdevice/ref_tracker
traces because references to netdev are not released in time.
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 26 Apr 2024 07:02:02 +0000 (07:02 +0000)]
inet: use call_rcu_hurry() in inet_free_ifa()
This is a followup of commit
c4e86b4363ac ("net: add two more
call_rcu_hurry()")
Our reference to ifa->ifa_dev must be freed ASAP
to release the reference to the netdev the same way.
inet_rcu_free_ifa()
in_dev_put()
-> in_dev_finish_destroy()
-> netdev_put()
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 26 Apr 2024 06:42:22 +0000 (06:42 +0000)]
net: give more chances to rcu in netdev_wait_allrefs_any()
This came while reviewing commit
c4e86b4363ac ("net: add two more
call_rcu_hurry()").
Paolo asked if adding one synchronize_rcu() would help.
While synchronize_rcu() does not help, making sure to call
rcu_barrier() before msleep(wait) is definitely helping
to make sure lazy call_rcu() are completed.
Instead of waiting ~100 seconds in my tests, the ref_tracker
splats occurs one time only, and netdev_wait_allrefs_any()
latency is reduced to the strict minimum.
Ideally we should audit our call_rcu() users to make sure
no refcount (or cascading call_rcu()) is held too long,
because rcu_barrier() is quite expensive.
Fixes:
0e4be9e57e8c ("net: use exponential backoff in netdev_wait_allrefs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/all/28bbf698-befb-42f6-b561-851c67f464aa@kernel.org/T/#m76d73ed6b03cd930778ac4d20a777f22a08d6824
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tanmay Patil [Thu, 25 Apr 2024 10:31:42 +0000 (16:01 +0530)]
net: ethernet: ti: am65-cpsw-qos: Add support to taprio for past base_time
If the base-time for taprio is in the past, start the schedule at the time
of the form "base_time + N*cycle_time" where N is the smallest possible
integer such that the above time is in the future.
Signed-off-by: Tanmay Patil <t-patil@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 Apr 2024 00:31:11 +0000 (17:31 -0700)]
tools: ynl: don't append doc of missing type directly to the type
When using YNL in tests appending the doc string to the type
name makes it harder to check that we got the correct error.
Put the doc under a separate key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240426003111.359285-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Apr 2024 23:10:27 +0000 (16:10 -0700)]
Merge branch 'selftests-drv-net-round-some-sharp-edges'
Jakub Kicinski says:
====================
selftests: drv-net: round some sharp edges
I had to explain how to run the driver tests twice already.
Improve the README so we can just point to it.
Improve the config validation.
v1: https://lore.kernel.org/r/
20240424221444.
4194069-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20240425222341.309778-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 25 Apr 2024 22:23:41 +0000 (15:23 -0700)]
selftests: drv-net: validate the environment
Throw a slightly more helpful exception when env variables
are partially populated. Prior to this change we'd get
a dictionary key exception somewhere later on.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 25 Apr 2024 22:23:40 +0000 (15:23 -0700)]
selftests: drv-net: reimplement the config parser
The shell lexer is not helping much, do very basic parsing
manually.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 25 Apr 2024 22:23:39 +0000 (15:23 -0700)]
selftests: drv-net: extend the README with more info and example
Add more info to the README. It's also now copied to GitHub for
increased visibility:
https://github.com/linux-netdev/nipa/wiki/Running-driver-tests
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 25 Apr 2024 19:34:50 +0000 (19:34 +0000)]
tcp: fix tcp_grow_skb() vs tstamps
I forgot to call tcp_skb_collapse_tstamp() in the
case we consume the second skb in write queue.
Neal suggested to create a common helper used by tcp_mtu_probe()
and tcp_grow_skb().
Fixes:
8ee602c63520 ("tcp: try to send bigger TSO packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240425193450.411640-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Stitt [Thu, 25 Apr 2024 01:19:13 +0000 (01:19 +0000)]
net: dsa: lan9303: use ethtool_puts() for lan9303_get_strings()
This pattern of strncpy with some pointer arithmetic setting fixed-sized
intervals with string literal data is a bit weird so let's use
ethtool_puts() as this has more obvious behavior and is less-error
prone.
Nicely, we also get to drop a usage of the now deprecated strncpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Link: https://github.com/KSPP/linux/issues/90
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240425-strncpy-drivers-net-dsa-lan9303-core-c-v4-1-9fafd419d7bb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jose E. Marchesi [Fri, 26 Apr 2024 14:51:58 +0000 (16:51 +0200)]
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
The definition of bpf_tail_call_static in tools/lib/bpf/bpf_helpers.h
is guarded by a preprocessor check to assure that clang is recent
enough to support it. This patch updates the guard so the function is
compiled when using GCC 13 or later as well.
Tested in bpf-next master. No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240426145158.14409-1-jose.marchesi@oracle.com
Paolo Abeni [Fri, 26 Apr 2024 13:34:04 +0000 (15:34 +0200)]
Merge branch 'implement-reset-reason-mechanism-to-detect'
Jason Xing says:
====================
Implement reset reason mechanism to detect
From: Jason Xing <kernelxing@tencent.com>
In production, there are so many cases about why the RST skb is sent but
we don't have a very convenient/fast method to detect the exact underlying
reasons.
RST is implemented in two kinds: passive kind (like tcp_v4_send_reset())
and active kind (like tcp_send_active_reset()). The former can be traced
carefully 1) in TCP, with the help of drop reasons, which is based on
Eric's idea[1], 2) in MPTCP, with the help of reset options defined in
RFC 8684. The latter is relatively independent, which should be
implemented on our own, such as active reset reasons which can not be
replace by skb drop reason or something like this.
In this series, I focus on the fundamental implement mostly about how
the rstreason mechanism works and give the detailed passive part as an
example, not including the active reset part. In future, we can go
further and refine those NOT_SPECIFIED reasons.
Here are some examples when tracing:
<idle>-0 [002] ..s1. 1830.262425: tcp_send_reset: skbaddr=x
skaddr=x src=x dest=x state=x reason=NOT_SPECIFIED
<idle>-0 [002] ..s1. 1830.262425: tcp_send_reset: skbaddr=x
skaddr=x src=x dest=x state=x reason=NO_SOCKET
[1]
Link: https://lore.kernel.org/all/CANn89iJw8x-LqgsWOeJQQvgVg6DnL5aBRLi10QN2WBdr+X4k=w@mail.gmail.com/
====================
Link: https://lore.kernel.org/r/20240425031340.46946-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:40 +0000 (11:13 +0800)]
rstreason: make it work in trace world
At last, we should let it work by introducing this reset reason in
trace world.
One of the possible expected outputs is:
... tcp_send_reset: skbaddr=xxx skaddr=xxx src=xxx dest=xxx
state=TCP_ESTABLISHED reason=NOT_SPECIFIED
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:39 +0000 (11:13 +0800)]
mptcp: introducing a helper into active reset logic
Since we have mapped every mptcp reset reason definition in enum
sk_rst_reason, introducing a new helper can cover some missing places
where we have already set the subflow->reset_reason.
Note: using SK_RST_REASON_NOT_SPECIFIED is the same as
SK_RST_REASON_MPTCP_RST_EUNSPEC. They are both unknown. So we can convert
it directly.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:38 +0000 (11:13 +0800)]
mptcp: support rstreason for passive reset
It relies on what reset options in the skb are as rfc8684 says. Reusing
this logic can save us much energy. This patch replaces most of the prior
NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:37 +0000 (11:13 +0800)]
tcp: support rstreason for passive reset
Reuse the dropreason logic to show the exact reason of tcp reset,
so we can finally display the corresponding item in enum sk_reset_reason
instead of reinventing new reset reasons. This patch replaces all
the prior NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:36 +0000 (11:13 +0800)]
rstreason: prepare for active reset
Like what we did to passive reset:
only passing possible reset reason in each active reset path.
No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:35 +0000 (11:13 +0800)]
rstreason: prepare for passive reset
Adjust the parameter and support passing reason of reset which
is for now NOT_SPECIFIED. No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:34 +0000 (11:13 +0800)]
net: introduce rstreason to detect why the RST is sent
Add a new standalone file for the easy future extension to support
both active reset and passive reset in the TCP/DCCP/MPTCP protocols.
This patch only does the preparations for reset reason mechanism,
nothing else changes.
The reset reasons are divided into three parts:
1) reuse drop reasons for passive reset in TCP
2) our own independent reasons which aren't relying on other reasons at all
3) reuse MP_TCPRST option for MPTCP
The benefits of a standalone reset reason are listed here:
1) it can cover more than one case, such as reset reasons in MPTCP,
active reset reasons.
2) people can easily/fastly understand and maintain this mechanism.
3) we get unified format of output with prefix stripped.
4) more new reset reasons are on the way
...
I will implement the basic codes of active/passive reset reason in
those three protocols, which are not complete for this moment. For
passive reset part in TCP, I only introduce the NO_SOCKET common case
which could be set as an example.
After this series applied, it will have the ability to open a new
gate to let other people contribute more reasons into it :)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Song Yoong Siang [Wed, 24 Apr 2024 21:02:54 +0000 (14:02 -0700)]
igc: Add Tx hardware timestamp request for AF_XDP zero-copy packet
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 2: Enable Tx hardware timestamp
hwstamp_ctl -i <iface> -t 1 -r 1
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time:
1679819246792971268 (sec:
1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time:
1679819246792981987 (sec:
1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time:
1679819246793036971 (sec:
1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time:
1679819246792981987 (sec:
1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time:
1679819246792971268 (sec:
1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Fri, 26 Apr 2024 11:26:56 +0000 (13:26 +0200)]
Merge branch 'selftests-virtio_net-introduce-initial-testing-infrastructure'
Jiri Pirko says:
====================
selftests: virtio_net: introduce initial testing infrastructure
This patchset aims at introducing very basic initial infrastructure
for virtio_net testing, namely it focuses on virtio feature testing.
The first patch adds support for debugfs for virtio devices, allowing
user to filter features to pretend to be driver that is not capable
of the filtered feature.
Example:
$ cat /sys/bus/virtio/devices/virtio0/features
1110010111111111111101010000110010000000100000000000000000000000
$ echo "5" >/sys/kernel/debug/virtio/virtio0/filter_feature_add
$ cat /sys/kernel/debug/virtio/virtio0/filter_features
5
$ echo "virtio0" > /sys/bus/virtio/drivers/virtio_net/unbind
$ echo "virtio0" > /sys/bus/virtio/drivers/virtio_net/bind
$ cat /sys/bus/virtio/devices/virtio0/features
1110000111111111111101010000110010000000100000000000000000000000
Leverage that in the last patch that lays ground for virtio_net
selftests testing, including very basic F_MAC feature test.
To run this, do:
$ make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
It is assumed, as with lot of other selftests in the net group,
that there are netdevices connected back-to-back. In this case,
two virtio_net devices connected back to back. If you use "tap" qemu
netdevice type, to configure this loop on a hypervisor, one may use
this script:
DEV1="$1"
DEV2="$2"
sudo tc qdisc add dev $DEV1 clsact
sudo tc qdisc add dev $DEV2 clsact
sudo tc filter add dev $DEV1 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV2
sudo tc filter add dev $DEV2 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV1
sudo ip link set $DEV1 up
sudo ip link set $DEV2 up
Another possibility is to use virtme-ng like this:
$ vng --network=loop
or directly:
$ vng --network=loop -- make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
"loop" network type will take care of creating two "hubport" qemu netdevs
putting them into a single hub.
To do it manually with qemu, pass following command line options:
-nic hubport,hubid=1,id=nd0,model=virtio-net-pci
-nic hubport,hubid=1,id=nd1,model=virtio-net-pci
====================
Link: https://lore.kernel.org/r/20240424104049.3935572-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko [Wed, 24 Apr 2024 10:40:49 +0000 (12:40 +0200)]
selftests: virtio_net: add initial tests
Introduce initial tests for virtio_net driver. Focus on feature testing
leveraging previously introduced debugfs feature filtering
infrastructure. Add very basic ping and F_MAC feature tests.
To run this, do:
$ make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
Run it on a system with 2 virtio_net devices connected back-to-back
on the hypervisor.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko [Wed, 24 Apr 2024 10:40:48 +0000 (12:40 +0200)]
selftests: forwarding: add wait_for_dev() helper
The existing setup_wait*() helper family check the status of the
interface to be up. Introduce wait_for_dev() to wait for the netdevice
to appear, for example after test script does manual device bind.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko [Wed, 24 Apr 2024 10:40:47 +0000 (12:40 +0200)]
selftests: forwarding: add check_driver() helper
Add a helper to be used to check if the netdevice is backed by specified
driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko [Wed, 24 Apr 2024 10:40:46 +0000 (12:40 +0200)]
selftests: forwarding: add ability to assemble NETIFS array by driver name
Allow driver tests to work without specifying the netdevice names.
Introduce a possibility to search for available netdevices according to
set driver name. Allow test to specify the name by setting
NETIF_FIND_DRIVER variable.
Note that user overrides this either by passing netdevice names on the
command line or by declaring NETIFS array in custom forwarding.config
configuration file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko [Wed, 24 Apr 2024 10:40:45 +0000 (12:40 +0200)]
virtio: add debugfs infrastructure to allow to debug virtio features
Currently there is no way for user to set what features the driver
should obey or not, it is hard wired in the code.
In order to be able to debug the device behavior in case some feature is
disabled, introduce a debugfs infrastructure with couple of files
allowing user to see what features the device advertises and
to set filter for features used by driver.
Example:
$cat /sys/bus/virtio/devices/virtio0/features
1110010111111111111101010000110010000000100000000000000000000000
$ echo "5" >/sys/kernel/debug/virtio/virtio0/filter_feature_add
$ cat /sys/kernel/debug/virtio/virtio0/filter_features
5
$ echo "virtio0" > /sys/bus/virtio/drivers/virtio_net/unbind
$ echo "virtio0" > /sys/bus/virtio/drivers/virtio_net/bind
$ cat /sys/bus/virtio/devices/virtio0/features
1110000111111111111101010000110010000000100000000000000000000000
Note that sysfs "features" now already exists, this patch does not
touch it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Fri, 26 Apr 2024 10:04:45 +0000 (12:04 +0200)]
Merge branch 'net-hsr-add-support-for-hsr-san-redbox'
Lukasz Majewski says:
====================
net: hsr: Add support for HSR-SAN (RedBOX)
This patch set provides v6 of HSR-SAN (RedBOX) as well as hsr_redbox.sh
test script.
The most straightforward way to test those patches is to use buildroot
(2024.02.01) to create rootfs and QEMU based environment to run x86_64
Linux.
Then one shall run hsr_redbox.sh and hsr_ping.sh from
tools/testing/selftests/net/hsr.
====================
Link: https://lore.kernel.org/r/20240423124908.2073400-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lukasz Majewski [Tue, 23 Apr 2024 12:49:08 +0000 (14:49 +0200)]
test: hsr: Add test for HSR RedBOX (HSR-SAN) mode of operation
This patch adds hsr_redbox.sh script to test if HSR-SAN mode of operation
works correctly.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lukasz Majewski [Tue, 23 Apr 2024 12:49:07 +0000 (14:49 +0200)]
test: hsr: Extract version agnostic information from ping command output
Current code checks if ping command output match hardcoded pattern:
"10 packets transmitted, 10 received, 0% packet loss,".
Such approach will work only from one ping program version (for which
this test has been originally written).
This patch address problem when ping with different summary output
like "10 packets transmitted, 10 packets received, 0% packet" is
used to run this test - for example one from busybox (as the test
system runs in QEMU with rootfs created with buildroot).
The fix is to modify output of ping command to be agnostic to ping
version used on the platform.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lukasz Majewski [Tue, 23 Apr 2024 12:49:06 +0000 (14:49 +0200)]
test: hsr: Move common code to hsr_common.sh file
Some of the code already present in the hsr_ping.sh test program can be
moved to a separate script file, so it can be reused by other HSR
functionality (like HSR-SAN) tests.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lukasz Majewski [Tue, 23 Apr 2024 12:49:05 +0000 (14:49 +0200)]
test: hsr: Remove script code already implemented in lib.sh
Some parts (like netns creation and cleanup) of hsr_ping.sh script are
already implemented in ../lib.sh common script, so can be replaced by it.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lukasz Majewski [Tue, 23 Apr 2024 12:49:04 +0000 (14:49 +0200)]
net: hsr: Provide RedBox support (HSR-SAN)
Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
Following traffic reduction optimizations have been implemented:
- Do not send HSR supervisory frames to Port C (interlink)
- Do not forward to HSR ring frames addressed to Port C
- Do not forward to Port C frames from HSR ring
- Do not send duplicate HSR frame to HSR ring when destination is Port C
The corresponding patch to modify iptable2 sources has already been sent:
https://lore.kernel.org/netdev/
20240308145729.490863-1-lukma@denx.de/T/
Testing procedure (veth and netns):
-----------------------------------
One shall run:
linux-vanila/tools/testing/selftests/net/hsr/hsr_redbox.sh
(Detailed description of the setup one can find in the test
script file).
Testing procedure (real hardware):
----------------------------------
The EVB-KSZ9477 has been used for testing on net-next branch
(SHA1:
5fc68320c1fb3c7d456ddcae0b4757326a043e6f).
Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
(with HW offloading for ksz9477) was created. Port 3 has been used as
interlink port (single USB-ETH dongle).
Configuration - RedBox (EVB-KSZ9477):
if link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip link set lan3 up
ip addr add 192.168.0.11/24 dev hsr1
ip link set hsr1 up
Configuration - DAN-H (EVB-KSZ9477):
ip link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip addr add 192.168.0.12/24 dev hsr1
ip link set hsr1 up
This approach uses only SW based HSR devices (hsr1).
-------------- ----------------- ------------
DAN-H Port5 | <------> | Port5 | |
Port4 | <------> | Port4 Port3 | <---> | PC
| | (RedBox) | | (USB-ETH)
EVB-KSZ9477 | | EVB-KSZ9477 | |
-------------- ----------------- ------------
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Davide Caratti [Thu, 18 Apr 2024 13:50:11 +0000 (15:50 +0200)]
net/sched: fix false lockdep warning on qdisc root lock
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0:
ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1:
ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2:
ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4:
ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+
9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Fri, 26 Apr 2024 03:00:54 +0000 (20:00 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Apr 2024 02:36:39 +0000 (19:36 -0700)]
Merge branch 'net-lan966x-flower-validate-control-flags'
Asbjørn Sloth Tønnesen says:
====================
net: lan966x: flower: validate control flags
This series adds flower control flags validation to the
lan966x driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags.
v1: https://lore.kernel.org/netdev/
20240423102720.228728-1-ast@fiberby.net/
====================
Link: https://lore.kernel.org/r/20240424125347.461995-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:53:40 +0000 (12:53 +0000)]
net: lan966x: flower: check for unsupported control flags
Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.
In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:53:39 +0000 (12:53 +0000)]
net: lan966x: flower: rename goto in lan966x_tc_flower_handler_control_usage()
Rename goto label, as the error message is specific to the fragment flags.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:53:38 +0000 (12:53 +0000)]
net: lan966x: flower: add extack to lan966x_tc_flower_handler_control_usage()
Define extack locally, to reduce line lengths and aid future users.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Apr 2024 02:35:10 +0000 (19:35 -0700)]
Merge branch 'net-sparx5-flower-validate-control-flags'
Asbjørn Sloth Tønnesen says:
====================
net: sparx5: flower: validate control flags
This series adds flower control flags validation to the
sparx5 driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
v1: https://lore.kernel.org/netdev/
20240423102728.228765-1-ast@fiberby.net/
====================
Link: https://lore.kernel.org/r/20240424121632.459022-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:16:25 +0000 (12:16 +0000)]
net: sparx5: flower: check for unsupported control flags
Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.
In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:16:24 +0000 (12:16 +0000)]
net: sparx5: flower: remove goto in sparx5_tc_flower_handler_control_usage()
Remove goto, as it's only used once, and the error message is
specific to that context.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:16:23 +0000 (12:16 +0000)]
net: sparx5: flower: add extack to sparx5_tc_flower_handler_control_usage()
Define extack locally, to reduce line lengths and aid future users.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen [Wed, 24 Apr 2024 12:16:22 +0000 (12:16 +0000)]
net: sparx5: flower: only do lookup if fragment flags are set
The fragment lookup should only be performed, when
at least one of the fragment flags are set.
This change was deliberately not included in commit
68aba00483c7 ("net: sparx5: flower: fix fragment flags handling")
as it's only needed for future proffing the code, since
"mask" is currently only set in conjunction with the
fragment flags.
(The 3rd flag FLOW_DIS_ENCAPSULATION is only used with "key")
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Wed, 24 Apr 2024 16:11:07 +0000 (09:11 -0700)]
net: wwan: t7xx: Un-embed dummy device
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.
[1] https://lore.kernel.org/all/
20240229225910.
79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240424161108.3397057-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Thaler [Mon, 22 Apr 2024 19:09:42 +0000 (12:09 -0700)]
bpf, docs: Add introduction for use in the ISA Internet Draft
The proposed intro paragraph text is derived from the first paragraph
of the IETF BPF WG charter at https://datatracker.ietf.org/wg/bpf/about/
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240422190942.24658-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub Kicinski [Fri, 26 Apr 2024 02:13:28 +0000 (19:13 -0700)]
Merge branch 'net-microchip-correct-spelling-in-comments'
Simon Horman says:
====================
net: microchip: Correct spelling in comments
Correct spelling in comments in Microchip drivers.
Flagged by codespell.
v1: https://lore.kernel.org/r/
20240419-lan743x-confirm-v1-0-
2a087617a3e5@kernel.org
====================
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-0-f0480542e39f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 24 Apr 2024 15:13:26 +0000 (16:13 +0100)]
net: sparx5: Correct spelling in comments
Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-4-f0480542e39f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 24 Apr 2024 15:13:25 +0000 (16:13 +0100)]
net: encx24j600: Correct spelling in comments
Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-3-f0480542e39f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 24 Apr 2024 15:13:24 +0000 (16:13 +0100)]
net: lan966x: Correct spelling in comments
Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-2-f0480542e39f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 24 Apr 2024 15:13:23 +0000 (16:13 +0100)]
net: lan743x: Correct spelling in comments
Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-1-f0480542e39f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hayes Wang [Wed, 24 Apr 2024 08:45:32 +0000 (16:45 +0800)]
r8152: replace dev_info with dev_dbg for loading firmware
Someone complains the message appears continuously. This occurs
because the device is woken from UPS mode, and the driver re-loads
the firmware.
When the device enters runtime suspend and cable is unplugged, the
device would enter UPS mode. If the runtime resume occurs, and the
device is woken from UPS mode, the driver has to re-load the firmware
and causes the message. If someone wakes the device continuously, the
message would be shown continuously, too. Use dev_dbg to avoid it.
Note that, the function could be called before register_netdev(), so I
don't use netif_info() or netif_dbg().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20240424084532.159649-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ma Ke [Wed, 24 Apr 2024 06:56:34 +0000 (14:56 +0800)]
net: usb: ax88179_178a: Add check for usbnet_get_endpoints()
To avoid the failure of usbnet_get_endpoints(), we should check the
return value of the usbnet_get_endpoints().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240424065634.1870027-1-make_ruc2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle [Tue, 23 Apr 2024 09:00:25 +0000 (11:00 +0200)]
net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX module
Add quirk for ATS SFP-GE-T 1000Base-TX module.
This copper module comes with broken TX_FAULT indicator which must be
ignored for it to work.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rebased on top of net-next ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240423090025.29231-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / linux-2.6-microblaze.git / log