Linus Torvalds [Sat, 7 Mar 2026 00:07:22 +0000 (16:07 -0800)]
Merge tag 'v7.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix potential oops on open failure
- Fix unmount to better free deferred closes
- Use proper constant-time MAC comparison function
- Two buffer allocation size fixes
- Two minor cleanups
- make SMB2 kunit tests a distinct module
* tag 'v7.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix oops due to uninitialised var in smb2_unlink()
cifs: open files should not hold ref on superblock
smb: client: Compare MACs in constant time
smb/client: remove unused SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in smb2_compound_op()
smb: update some doc references
smb/client: make SMB2 maperror KUnit tests a separate module
Linus Torvalds [Fri, 6 Mar 2026 21:37:52 +0000 (13:37 -0800)]
Merge tag 'pci-v7.0-fixes-3' of git://git./linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Initialize msi_addr_mask for OF-created PCI devices to fix sparc and
powerpc probe regressions (Nilay Shroff)
- Orphan the Altera PCIe controller driver (Dave Hansen)
* tag 'pci-v7.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Orphan Altera PCIe controller driver
sparc/PCI: Initialize msi_addr_mask for OF-created PCI devices
powerpc/pci: Initialize msi_addr_mask for OF-created PCI devices
Linus Torvalds [Fri, 6 Mar 2026 21:29:12 +0000 (13:29 -0800)]
Merge tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull.
There is one mm fix in here for a HMM livelock triggered by the xe
driver tests. Otherwise it's a pretty wide range of fixes across the
board, ttm UAF regression fix, amdgpu fixes, nouveau doesn't crash my
laptop anymore fix, and a fair bit of misc.
Seems about right for rc3.
mm:
- mm: Fix a hmm_range_fault() livelock / starvation problem
pagemap:
- Revert "drm/pagemap: Disable device-to-device migration"
ttm:
- fix function return breaking reclaim
- fix build failure on PREEMPT_RT
- fix bo->resource UAF
dma-buf:
- include ioctl.h in uapi header
sched:
- fix kernel doc warning
amdgpu:
- LUT fixes
- VCN5 fix
- Dispclk fix
- SMU 13.x fix
- Fix race in VM acquire
- PSP 15.x fix
- UserQ fix
amdxdna:
- fix invalid payload for failed command
- fix NULL ptr dereference
- fix major fw version check
- avoid inconsistent fw state on error
i915/display:
- Fix for Lenovo T14 G7 display not refreshing
xe:
- Do not preempt fence signaling CS instructions
- Some leak and finalization fixes
- Workaround fix
nouveau:
- avoid runtime suspend oops when using dp aux
panthor:
- fix gem_sync argument ordering
solomon:
- fix incorrect display output
renesas:
- fix DSI divider programming
ethosu:
- fix job submit error clean-up refcount
- fix NPU_OP_ELEMENTWISE validation
- handle possible underflows in IFM size calcs"
* tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
accel: ethosu: Handle possible underflow in IFM size calculations
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
accel: ethosu: Fix job submit error clean-up refcount underflows
accel/amdxdna: Split mailbox channel create function
drm/panthor: Correct the order of arguments passed to gem_sync
Revert "drm/syncobj: Fix handle <-> fd ioctls with dirty stack"
drm/ttm: Fix bo resource use-after-free
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
accel/amdxdna: Fix major version check on NPU1 platform
drm/amdgpu/userq: refcount userqueues to avoid any race conditions
drm/amdgpu/userq: Consolidate wait ioctl exit path
drm/amdgpu/psp: Use Indirect access address for GFX to PSP mailbox
drm/amdgpu: Fix use-after-free race in VM acquire
drm/amd/pm: remove invalid gpu_metrics.energy_accumulator on smu v13.0.x
drm/xe: Fix memory leak in xe_vm_madvise_ioctl
drm/xe/reg_sr: Fix leak on xa_store failure
drm/xe/xe2_hpg: Correct implementation of Wa_16025250150
drm/xe/gsc: Fix GSC proxy cleanup on early initialization failure
Revert "drm/pagemap: Disable device-to-device migration"
drm/i915/psr: Fix for Panel Replay X granularity DPCD register handling
...
Linus Torvalds [Fri, 6 Mar 2026 20:34:49 +0000 (12:34 -0800)]
Merge tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix rust warnings when CONFIG_PRINTK is disabled
- Reduce stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value
- Update email address for David Gow
- Copy caller args in kunit tool in run_kernel to prevent mutation
* tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: reduce stack usage in kunit_run_tests()
kunit: tool: copy caller args in run_kernel to prevent mutation
rust: kunit: fix warning when !CONFIG_PRINTK
MAINTAINERS: Update email address for David Gow
Linus Torvalds [Fri, 6 Mar 2026 18:33:32 +0000 (10:33 -0800)]
Merge tag 'spi-fix-v7.0-rc2' of git://git./linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One device specific fix here, it was possible we might end up trying
to dereference an invalid pointer while reporting a transfer timeout
on DesignWare controllers"
* tag 'spi-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-dw-dma: fix print error log when wait finish transaction
Linus Torvalds [Fri, 6 Mar 2026 18:27:45 +0000 (10:27 -0800)]
Merge tag 'regulator-fix-v7.0-rc2' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small, driver specific fixes which might not even have
much impact if you have the affected devices depending on your setup"
* tag 'regulator-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pf9453: Respect IRQ trigger settings from firmware
regulator: mt6363: Fix incorrect and redundant IRQ disposal in probe
Linus Torvalds [Fri, 6 Mar 2026 18:06:04 +0000 (10:06 -0800)]
Merge tag 'sound-7.0-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of device-specific fixes. Most of changes are
fairly small device-specific quirks of fixes for HD- and USB-audio,
ASoC Intel, AMD, fsl, Cirrus and co.
The only large LOC is for plumbing ASoC ACP driver to add the Cirrus
Logic codec support, so this one is also just adding some tables"
* tag 'sound-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: us122l: drop redundant interface references
ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK PM1503CDA
ASoC: dt-bindings: renesas,rz-ssi: Document RZ/G3L SoC
ASoC: SDCA: Add allocation failure check for Entity name
ALSA: hda/senary: Ensure EAPD is enabled during init
ALSA: hda/senary: Use codec->core.afg for GPIO access
ALSA: doc: usb-audio: Add doc for QUIRK_FLAG_SKIP_IFACE_SETUP
ASoC: dt-bindings: tegra: Add compatible for Tegra238 sound card
ALSA: hda/hdmi: Add Tegra238 HDA codec device ID
ASoC: cs35l56: Suppress pointless warning about number of GPIO pulls
ASoC: amd: acp: Add ACP6.3 match entries for Cirrus Logic parts
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCD SKU
ASoC: rt1321: fix DMIC ch2/3 mask issue
ASoC: cs35l56: Only patch ASP registers if the DAI is part of a DAIlink
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_set_reg()
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_put_bits()
ALSA: firewire: dice: Fix printf warning with W=1
ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781
ALSA: hda/realtek: Add quirk for HP Pavilion 15-eh1xxx to enable mute LED
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
...
Linus Torvalds [Fri, 6 Mar 2026 18:00:58 +0000 (10:00 -0800)]
Merge tag 'hid-for-linus-
2026030601' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-
2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
Linus Torvalds [Fri, 6 Mar 2026 17:48:50 +0000 (09:48 -0800)]
Merge tag 'platform-drivers-x86-v7.0-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Add G-Mode support to m18 laptops
- asus-armoury: Add support for FA401UM, G733QS, GX650RX
- dell-wmi-sysman: Don't hex dump plaintext password data
- hp-bioscfg: Support large number of enumeration attributes
- hp-wmi: Add support for Omen 14-fb1xxx, 16-xd0xxx, 16-wf0xxx, and
Victus-d0xxx
- int3472: Handle GPIO type 0x10 (DOVDD)
- intel-hid:
- Add Dell 14 & 16 Plus 2-in-1 to dmi_vgbs_allow_list
- Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
- mellanox: mlxreg: Fix kernel-doc warnings
- oxpec: Add support for OneXPlayer X1 Air, X1z, APEX, and Aokzoe A2
Pro
- redmi-wmi: Add more Fn hotkey mappings
- thinkpad_acpi: Fix errors reading battery thresholds
- touchscreen_dmi: Add quirk for y-inverted Goodix touchscreen on SUPI
S10
- uniwill-laptop:
- FN lock/super key lock attributes rename
- Fix crash on unexpected battery event
- A special key combination can alter FN lock status so mark it
volatile
- Handle FN lock event
* tag 'platform-drivers-x86-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (27 commits)
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
platform_data/mlxreg: mlxreg.h: fix all kernel-doc warnings
platform/x86: asus-armoury: add support for FA401UM
platform/x86: asus-armoury: add support for GX650RX
platform/x86: hp-bioscfg: Support allocations of larger data
platform/x86: oxpec: Add support for Aokzoe A2 Pro
platform/x86: oxpec: Add support for OneXPlayer X1 Air
platform/x86: oxpec: Add support for OneXPlayer X1z
platform/x86: oxpec: Add support for OneXPlayer APEX
platform/x86: uniwill-laptop: Handle FN lock event
platform/x86: uniwill-laptop: Mark FN lock status as being volatile
platform/x86: uniwill-laptop: Fix crash on unexpected battery event
platform/x86: uniwill-laptop: Rename FN lock and super key lock attrs
platform/x86: redmi-wmi: Add more hotkey mappings
platform/x86: alienware-wmi-wmax: Add G-Mode support to m18 laptops
platform/x86: hp-wmi: add Omen 14-fb1xxx (board 8E41) support
platform/x86: dell-wmi: Add audio/mic mute key codes
platform/x86: hp-wmi: Add Victus 16-d0xxx support
platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
platform/x86: int3472: Handle GPIO type 0x10 (DOVDD)
...
Linus Torvalds [Fri, 6 Mar 2026 17:22:51 +0000 (09:22 -0800)]
Merge tag 'slab-for-7.0-rc2' of git://git./linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for slab->stride truncation on 64k page systems due to short
type. It was not due to races and lack of barriers in the end. (Harry
Yoo)
- Fix for severe performance regression due to unnecessary sheaf refill
restrictions exposed by mempool allocation strategy. (Vlastimil
Babka)
- Stable fix for potential silent percpu sheaf flushing failures on
PREEMPT_RT. (Vlastimil Babka)
* tag 'slab-for-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: change stride type from unsigned short to unsigned int
mm/slab: allow sheaf refill if blocking is not allowed
slab: distinguish lock and trylock for sheaf_flush_main()
Linus Torvalds [Fri, 6 Mar 2026 17:16:39 +0000 (09:16 -0800)]
Merge tag 'pmdomain-v7.0-rc1' of git://git./linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- rockchip: Fix PD_VCODEC for RK3588
- bcm: Fix broken reset status read for bcm2835
* tag 'pmdomain-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: rockchip: Fix PD_VCODEC for RK3588
pmdomain: bcm: bcm2835-power: Fix broken reset status read
Linus Torvalds [Fri, 6 Mar 2026 17:10:36 +0000 (09:10 -0800)]
Require (reasonably) normal mappings for MADV_DOFORK
This came up as a result of the tracing fix pull request, and commit
e39bb9e02b68 ("tracing: Fix WARN_ON in tracing_buffers_mmap_close") in
particular.
The use of MADV_DOFORK confused the ring buffer mapping reference
counting just because it was unexpected, since the mapping was
originally done with VM_DONTCOPY.
The tracing code may well be the only case of this (and fixed it all by
just using the mmap open callback to unconfuse itself), but it's just
strange that we allow MADV_DOFORK on special mappings where the kernel
has set the "don't copy this" bit.
The code already disallowed it for VM_IO mappings (going back to the
original commit
f822566165dd: "madvise MADV_DONTFORK/MADV_DOFORK"), so
just extend it to any of the VM_SPECIAL cases (which includes
VM_DONTEXPAND | VM_PFNMAP | VM_MIXEDMAP in addition to VM_IO).
We could also allow MADV_DOFORK only on mappings that had been marked
DONTFORK by the user. But that would require us to track that
(presumably with another VM_xyz bit), so let's just do this trivial and
straightforward modifications.
If anybody notices, Lorenzo will be boarding Flying Pig Airlines.
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Link: https://lore.kernel.org/all/a8907468-d7e9-4727-af28-66d905093230@kernel.org/
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 6 Mar 2026 16:44:20 +0000 (08:44 -0800)]
Merge tag 'v7.0-p2' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix use-after-free in ccp
- Fix bug when SEV is disabled in ccp
- Fix tfm_count leak in atmel-sha204a
* tag 'v7.0-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Fix OOM ->tfm_count leak
crypto: ccp - Fix use-after-free on error path
crypto: ccp - allow callers to use HV-Fixed page API when SEV is disabled
Linus Torvalds [Fri, 6 Mar 2026 16:41:20 +0000 (08:41 -0800)]
Merge tag 'ata-7.0-rc3' of git://git./linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a problem where the deferred non-NCQ command would incorrectly
get completed as a failed command, if there was another command that
timed out. Found by Gemini (Guenter)
- The deferred non-NCQ command work is only supposed to run after the
last NCQ command finishes. However, because the work was never
canceled on error (e.g. a timeout), the work could incorrectly run
when commands were still in flight. Found by syzbot (me)
- Add a quirk to make sure that QEMU harddrives can potentially use up
to 32 MiB I/Os (Pedro)
- Add a quirk to disable LPM on Seagate ST1000DM010-2EP102 (Maximilian)
* tag 'ata-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-eh: Fix detection of deferred qc timeouts
ata: libata-core: Add BRIDGE_OK quirk for QEMU drives
ata: libata: cancel pending work after clearing deferred_qc
ata: libata-core: Disable LPM on ST1000DM010-2EP102
Linus Torvalds [Fri, 6 Mar 2026 16:36:18 +0000 (08:36 -0800)]
Merge tag 'block-7.0-
20260305' of git://git./linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-
20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
Linus Torvalds [Fri, 6 Mar 2026 16:31:36 +0000 (08:31 -0800)]
Merge tag 'io_uring-7.0-
20260305' of git://git./linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a typo in the mock_file help text
- Fix a comment regarding IORING_SETUP_TASKRUN_FLAG in the
io_uring.h UAPI header
- Use READ_ONCE() for reading refill queue entries
- Reject SEND_VECTORIZED for fixed buffer sends, as it isn't
implemented. Currently this flag is silently ignored
This is in preparation for making these work, but first we
need a fixup so that older kernels will correctly reject them
- Ensure "0" means default for the rx page size
* tag 'io_uring-7.0-
20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: use READ_ONCE with user shared RQEs
io_uring/mock: Fix typo in help text
io_uring/net: reject SEND_VECTORIZED when unsupported
io_uring: correct comment for IORING_SETUP_TASKRUN_FLAG
io_uring/zcrx: don't set rx_page_size when not requested
Christian Loehle [Fri, 6 Mar 2026 10:49:18 +0000 (10:49 +0000)]
bpf: drop kthread_exit from noreturn_deny
kthread_exit became a macro to do_exit in commit
28aaa9c39945
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 6 Mar 2026 09:45:11 +0000 (19:45 +1000)]
Merge tag 'drm-xe-fixes-2026-03-05' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Cross-subsystem Changes:
- mm: Fix a hmm_range_fault() livelock / starvation problem (Thomas)
Core Changes:
- Revert "drm/pagemap: Disable device-to-device migration" (Thomas)
Driver Changes:
- Do not preempt fence signaling CS instructions (Brost)
- Some leak and finalization fixes (Shuicheng, Tomasz, Varun, Zhanjun)
- Workaround fix (Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aamGvvGRBRtX8-6u@intel.com
Dave Airlie [Fri, 6 Mar 2026 09:40:23 +0000 (19:40 +1000)]
Merge tag 'drm-misc-fixes-2026-03-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Another early drm-misc-fixes PR to revert the previous uapi fix sent in
drm-misc-fixes-2026-03-05, together with a UAF fix in TTM, an argument
order fix for panthor, a fix for the firmware getting stuck on
resource allocation error handling for amdxdna, and a few fixes for
ethosu (size calculation and reference underflows, and a validation
fix).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260306-grumpy-pegasus-of-witchcraft-6bd2db@houat
Dave Airlie [Fri, 6 Mar 2026 07:45:47 +0000 (17:45 +1000)]
Merge tag 'drm-misc-fixes-2026-03-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A return type fix for ttm, a display fix for solomon, several misc fixes
for amdxdna, a DSI clock rate fix for rz-du, a uapi fix for syncobj, a
possible build failure fix for dma-buf, a doc warning fix for sched, a
build failure fix for ttm tests, and a crash fix when suspended for
nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260305-ludicrous-quirky-raven-7cdafd@houat
Guenter Roeck [Fri, 6 Mar 2026 02:48:05 +0000 (18:48 -0800)]
ata: libata-eh: Fix detection of deferred qc timeouts
If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI
command for any QC, the variable qc will hold a pointer to the last element
examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the
port deferred QC (ap->deferred_qc).
If that happens, the condition qc == ap->deferred_qc evaluates to true
despite the loop not breaking with a match on the SCSI command for this QC.
In that case, the error handler mistakenly intercepts a command that has
not been issued yet and that has not timed out, and thus erroneously
returning a timeout error.
Fix the problem by checking for i < ATA_MAX_QUEUE in addition to
qc == ap->deferred_qc.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes:
eddb98ad9364 ("ata: libata-eh: correctly handle deferred qc timeouts")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[cassel: modified commit log as suggested by Damien]
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Dave Airlie [Fri, 6 Mar 2026 07:10:00 +0000 (17:10 +1000)]
Merge tag 'drm-intel-fixes-2026-03-05' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for #7284: Lenovo T14 G7 display not refreshing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aakz17Jx3Ye9Vqci@jlahtine-mobl
Paulo Alcantara [Fri, 6 Mar 2026 00:57:06 +0000 (21:57 -0300)]
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com>
Fixes:
1cf9f2a6a544 ("smb: client: handle unlink(2) of files open by different clients")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Rob Herring (Arm) [Wed, 18 Feb 2026 22:21:57 +0000 (16:21 -0600)]
accel: ethosu: Handle possible underflow in IFM size calculations
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Rob Herring (Arm) [Wed, 18 Feb 2026 22:21:56 +0000 (16:21 -0600)]
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the
IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and
part of a field (bits 3:0) on the u85. The driver was hardcoded to the
u85.
Fixes:
5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-2-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Rob Herring (Arm) [Wed, 18 Feb 2026 22:21:55 +0000 (16:21 -0600)]
accel: ethosu: Fix job submit error clean-up refcount underflows
If the job submit fails before adding the job to the scheduler queue
such as when the GEM buffer bounds checks fail, then doing a
ethosu_job_put() results in a pm_runtime_put_autosuspend() without the
corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are
also unnecessary, but seem to be harmless.
Split the ethosu_job_cleanup() function into 2 parts for the before
and after the job is queued.
Fixes:
5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Linus Torvalds [Thu, 5 Mar 2026 19:52:03 +0000 (11:52 -0800)]
Merge tag 'fsverity-for-linus' of git://git./fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Prevent CONFIG_FS_VERITY from being enabled when the page size is
256K, since it doesn't work in that case"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: add dependency on 64K or smaller pages
Linus Torvalds [Thu, 5 Mar 2026 19:49:05 +0000 (11:49 -0800)]
Merge tag 'libcrypto-for-linus' of git://git./linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code
- Add a kunitconfig file for lib/crypto/
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib"
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Fix stale references to aes-generic
crypto: Clean up help text for CRYPTO_CRC32
crypto: Clean up help text for CRYPTO_CRC32C
crypto: Clean up help text for CRYPTO_XXHASH
crypto: Clean up help text for CRYPTO_SHA256
crypto: Clean up help text for CRYPTO_BLAKE2B
lib/crypto: tests: Add a .kunitconfig file
lib/crypto: tests: Depend on library options rather than selecting them
kunit: irq: Ensure timer doesn't fire too frequently
Linus Torvalds [Thu, 5 Mar 2026 19:37:27 +0000 (11:37 -0800)]
Merge tag 'acpi-7.0-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
* tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM"
ACPICA: Update the _CPC definition to match ACPI 6.6
Linus Torvalds [Thu, 5 Mar 2026 19:00:46 +0000 (11:00 -0800)]
Merge tag 'net-7.0-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Rafael J. Wysocki [Thu, 5 Mar 2026 17:46:43 +0000 (18:46 +0100)]
Merge branch 'acpica'
Merge a fix updating the _CPC object definition in ACPICA to avoid
printing a false-positive output package format warning on new
platforms (Saket Dumbre)
* acpica:
ACPICA: Update the _CPC definition to match ACPI 6.6
Dave Hansen [Thu, 5 Mar 2026 17:18:52 +0000 (09:18 -0800)]
MAINTAINERS: Orphan Altera PCIe controller driver
Email to Joyce Ooi <joyce.ooi@intel.com> now bounces. Remove the address
and mark the Altera PCIe controller driver as an orphan for now.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260305171852.3114177-1-dave.hansen@linux.intel.com
Lizhi Hou [Thu, 5 Mar 2026 06:20:41 +0000 (22:20 -0800)]
accel/amdxdna: Split mailbox channel create function
The management channel used for firmware control command submission is
currently created after the firmware is started. If channel creation
fails (for example, due to memory allocation failure or workqueue
creation interruption), the firmware remains in a pending state and is
unable to receive any control commands.
To avoid leaving the firmware in this inconsistent state, split
xdna_mailbox_create_channel() into two separate functions so that
resource allocation can be completed before interacting with the
hardware.
xdna_mailbox_alloc_channel()
Allocates memory and initializes the workqueue. This can be called
earlier, before interacting with the hardware.
xdna_mailbox_start_channel()
Performs the hardware interaction required to start the channel.
Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel().
Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel()
properly unwind the corresponding start and allocation steps, respectively.
Fixes:
b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260305062041.3954024-1-lizhi.hou@amd.com
Akash Goel [Thu, 5 Mar 2026 11:07:23 +0000 (11:07 +0000)]
drm/panthor: Correct the order of arguments passed to gem_sync
This commit corrects the order of arguments passed to panthor_gem_sync()
function, called when the SYNC_WAIT condition has to be evaluated for a
blocked GPU queue.
Fixes:
cd2c9c3015e6 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260305110723.2871733-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Takashi Iwai [Thu, 5 Mar 2026 16:22:14 +0000 (17:22 +0100)]
Merge tag 'asoc-fix-v7.0-rc2' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
A moderately large pile of fixes, though none of them are super major,
plus a few new quirks and device IDs.
Linus Torvalds [Thu, 5 Mar 2026 16:05:05 +0000 (08:05 -0800)]
Merge tag 'trace-v7.0-rc2' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
Jakub Kicinski [Thu, 5 Mar 2026 16:02:27 +0000 (08:02 -0800)]
Merge branch 'Address-XDP-frags-having-negative-tailroom'
Larysa Zaremba says:
====================
Address XDP frags having negative tailroom
Aside from the issue described below, tailroom calculation does not account
for pages being split between frags, e.g. in i40e, enetc and
AF_XDP ZC with smaller chunks. These series address the problem by
calculating modulo (skb_frag_off() % rxq->frag_size) in order to get
data offset within a smaller block of memory. Please note, xskxceiver
tail grow test passes without modulo e.g. in xdpdrv mode on i40e,
because there is not enough descriptors to get to flipped buffers.
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case,
but due to tailroom being stored as an unsigned int, it is reported to be
somewhere near UINT_MAX, resulting in a tail being grown, even if the
requested offset is too much(it is around 2K in the abovementioned test).
This later leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip
00007f4161aeac9d sp
00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at
7f410000000b ip
00000000004042b5 sp
00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,
7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:
ffffcc5c04f7f6d0 EFLAGS:
00010202
[ 7340.413494] RAX:
0006d255010bdffc RBX:
ffff891f477895a8 RCX:
0000000000000010
[ 7340.414431] RDX:
0001c17e3fffffff RSI:
00fa070000000000 RDI:
000382fc7fffffff
[ 7340.415354] RBP:
00fa070000000000 R08:
ffffcc5c04f7f8f8 R09:
ffffcc5c04f7f7d0
[ 7340.416283] R10:
ffff891f4c1a7000 R11:
ffffcc5c04f7f9c8 R12:
ffffcc5c04f7f7d0
[ 7340.417218] R13:
03ffffffffffffff R14:
00fa06fffffffe00 R15:
ffff891f47789500
[ 7340.418229] FS:
0000000000000000(0000) GS:
ffff891ffdfaa000(0000) knlGS:
0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 7340.420286] CR2:
00007f415bfffd58 CR3:
0000000103f03002 CR4:
0000000000772ef0
[ 7340.421237] PKRU:
55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:
00007ffc6ebfa770 EFLAGS:
00000246 ORIG_RAX:
00000000000000ca
[ 7340.440173] RAX:
fffffffffffffe00 RBX:
00000000000005a1 RCX:
00007f4161b14169
[ 7340.441061] RDX:
00000000000005a1 RSI:
0000000000000109 RDI:
00007f415bfff990
[ 7340.441943] RBP:
00007ffc6ebfa7a0 R08:
0000000000000000 R09:
00000000ffffffff
[ 7340.442824] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
[ 7340.443707] R13:
0000000000000000 R14:
00007f415bfff990 R15:
00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace
0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
The issue can also be easily reproduced with ice driver, by applying
the following diff to xskxceiver and enjoying a kernel panic in xdpdrv mode:
diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index
5af28f359cfd..
042d587fa7ef 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -2541,8 +2541,8 @@ int testapp_adjust_tail_grow_mb(struct test_spec *test)
{
test->mtu = MAX_ETH_JUMBO_SIZE;
/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
- return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
- XSK_UMEM__LARGE_FRAME_SIZE * 2);
+ return testapp_adjust_tail(test, XSK_UMEM__MAX_FRAME_SIZE * 100,
+ 6912);
}
int testapp_tx_queue_consumer(struct test_spec *test)
If we print out the values involved in the tailroom calculation:
tailroom = rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag);
4294967040 = 3456 - 3456 - 256
I personally reproduced and verified the issue in ice and i40e,
aside from WiP ixgbevf implementation.
====================
Link: https://patch.msgid.link/20260305111253.2317394-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:50 +0000 (12:12 +0100)]
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip
00007f4161aeac9d sp
00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at
7f410000000b ip
00000000004042b5 sp
00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,
7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:
ffffcc5c04f7f6d0 EFLAGS:
00010202
[ 7340.413494] RAX:
0006d255010bdffc RBX:
ffff891f477895a8 RCX:
0000000000000010
[ 7340.414431] RDX:
0001c17e3fffffff RSI:
00fa070000000000 RDI:
000382fc7fffffff
[ 7340.415354] RBP:
00fa070000000000 R08:
ffffcc5c04f7f8f8 R09:
ffffcc5c04f7f7d0
[ 7340.416283] R10:
ffff891f4c1a7000 R11:
ffffcc5c04f7f9c8 R12:
ffffcc5c04f7f7d0
[ 7340.417218] R13:
03ffffffffffffff R14:
00fa06fffffffe00 R15:
ffff891f47789500
[ 7340.418229] FS:
0000000000000000(0000) GS:
ffff891ffdfaa000(0000) knlGS:
0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 7340.420286] CR2:
00007f415bfffd58 CR3:
0000000103f03002 CR4:
0000000000772ef0
[ 7340.421237] PKRU:
55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:
00007ffc6ebfa770 EFLAGS:
00000246 ORIG_RAX:
00000000000000ca
[ 7340.440173] RAX:
fffffffffffffe00 RBX:
00000000000005a1 RCX:
00007f4161b14169
[ 7340.441061] RDX:
00000000000005a1 RSI:
0000000000000109 RDI:
00007f415bfff990
[ 7340.441943] RBP:
00007ffc6ebfa7a0 R08:
0000000000000000 R09:
00000000ffffffff
[ 7340.442824] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
[ 7340.443707] R13:
0000000000000000 R14:
00007f415bfff990 R15:
00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace
0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
Fixes:
bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-10-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:49 +0000 (12:12 +0100)]
net: enetc: use truesize as XDP RxQ info frag_size
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes:
2768b2e2f7d2 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:48 +0000 (12:12 +0100)]
libeth, idpf: use truesize as XDP RxQ info frag_size
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes:
ac8a861f632e ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:47 +0000 (12:12 +0100)]
i40e: use xdp.frame_sz as XDP RxQ info frag_size
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes:
a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:46 +0000 (12:12 +0100)]
i40e: fix registering XDP RxQ info
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes:
a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:45 +0000 (12:12 +0100)]
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper.
Fixes:
2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:44 +0000 (12:12 +0100)]
ice: fix rxq info registering in mbuf packets
XDP RxQ info contains frag_size, which depends on the MTU. This makes the
old way of registering RxQ info before calculating new buffer sizes
invalid. Currently, it leads to frag_size being outdated, making it
sometimes impossible to grow tailroom in a mbuf packet. E.g. fragments are
actually 3K+, but frag size is still as if MTU was 1500.
Always register new XDP RxQ info after reconfiguring memory pools.
Fixes:
2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-4-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:43 +0000 (12:12 +0100)]
xsk: introduce helper to determine rxq->frag_size
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes:
24ea50127ecf ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Thu, 5 Mar 2026 11:12:42 +0000 (12:12 +0100)]
xdp: use modulo operation to calculate XDP frag tailroom
The current formula for calculating XDP tailroom in mbuf packets works only
if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this
defeats the purpose of the parameter overall and without any indication
leads to negative calculated tailroom on at least half of frags, if shared
pages are used.
There are not many drivers that set rxq->frag_size. Among them:
* i40e and enetc always split page uniformly between frags, use shared
pages
* ice uses page_pool frags via libeth, those are power-of-2 and uniformly
distributed across page
* idpf has variable frag_size with XDP on, so current API is not applicable
* mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool
As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo
operation yields good results for aligned chunks, they are all power-of-2,
between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is
2K. Buffers in unaligned mode are not distributed uniformly, so modulo
operation would not work.
To accommodate unaligned buffers, we could define frag_size as
data + tailroom, and hence do not subtract offset when calculating
tailroom, but this would necessitate more changes in the drivers.
Define rxq->frag_size as an even portion of a page that fully belongs to a
single frag. When calculating tailroom, locate the data start within such
portion by performing a modulo operation on page offset.
Fixes:
bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Wed, 4 Mar 2026 14:06:03 +0000 (09:06 -0500)]
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
Add 2 test cases to exercise fix in act_ife's internal metalist
behaviour.
- Update decode ife action into encode with tcindex metadata
- Update decode ife action into encode with multiple metadata
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jamal Hadi Salim [Wed, 4 Mar 2026 14:06:02 +0000 (09:06 -0500)]
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr
ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted
7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure.
Fixes:
aa9fd9a325d51 ("sched: act: ife: update parameters via rcu handling")
Reported-by: Ruitong Liu <cnitlrt@gmail.com>
Tested-by: Ruitong Liu <cnitlrt@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 15:53:19 +0000 (07:53 -0800)]
Merge branch 'net-ipv6-fix-panic-when-ipv4-route-references-loopback-ipv6-nexthop-and-add-selftest'
Jiayuan Chen says:
====================
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop and add selftest
syzbot reported a kernel panic [1] when an IPv4 route references
a loopback IPv6 nexthop object:
BUG: unable to handle page fault for address:
ffff8d069e7aa000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD
6aa01067 P4D
6aa01067 PUD 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 2 UID: 0 PID: 530 Comm: ping Not tainted 6.19.0+ #193 PREEMPT
RIP: 0010:ip_route_output_key_hash_rcu+0x578/0x9e0
RSP: 0018:
ffffd2ffc1573918 EFLAGS:
00010286
RAX:
ffff8d069e7aa000 RBX:
ffffd2ffc1573988 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffffd2ffc1573978 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8d060d496000
R13:
0000000000000000 R14:
ffff8d060399a600 R15:
ffff8d06019a6ab8
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff8d069e7aa000 CR3:
0000000106eb0001 CR4:
0000000000770ef0
PKRU:
55555554
Call Trace:
<TASK>
ip_route_output_key_hash+0x86/0x1a0
__ip4_datagram_connect+0x2b5/0x4e0
udp_connect+0x2c/0x60
inet_dgram_connect+0x88/0xd0
__sys_connect_file+0x56/0x90
__sys_connect+0xa8/0xe0
__x64_sys_connect+0x18/0x30
x64_sys_call+0xfb9/0x26e0
do_syscall_64+0xd3/0x1510
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reproduction:
ip -6 nexthop add id 100 dev lo
ip route add 172.20.20.0/24 nhid 100
ping -c1 172.20.20.1 # kernel crash
Problem Description
When a standalone IPv6 nexthop object is created with a loopback device,
fib6_nh_init() misclassifies it as a reject route. Nexthop objects have
no destination prefix (fc_dst=::), so fib6_is_reject() always matches
any loopback nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. When an IPv4 route later references
this nexthop and triggers a route lookup, __mkroute_output() calls
raw_cpu_ptr(nhc->nhc_pcpu_rth_output) on a NULL pointer, causing a page
fault.
The reject classification was designed for regular IPv6 routes to prevent
kernel routing loops, but nexthop objects should not be subject to this
check since they carry no destination information. Loop prevention is
handled separately when the route itself is created.
[1] https://syzkaller.appspot.com/bug?extid=
334190e097a98a1b81bb
====================
Link: https://patch.msgid.link/20260304113817.294966-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen [Wed, 4 Mar 2026 11:38:14 +0000 (19:38 +0800)]
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen [Wed, 4 Mar 2026 11:38:13 +0000 (19:38 +0800)]
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Fixes:
493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
698f8482.
a70a0220.2c38d7.00ca.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fernando Fernandez Mancera [Wed, 4 Mar 2026 12:03:57 +0000 (13:03 +0100)]
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address:
0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
Fixes:
e15a00aafa4b ("vxlan: add ipv6 route short circuit support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260304120357.9778-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fernando Fernandez Mancera [Wed, 4 Mar 2026 12:03:56 +0000 (13:03 +0100)]
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address:
0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled.
Fixes:
ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Guruprasad C P <gurucp2005@gmail.com>
Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pedro Falcato [Thu, 5 Mar 2026 14:53:12 +0000 (14:53 +0000)]
ata: libata-core: Add BRIDGE_OK quirk for QEMU drives
Currently, whenever you boot with a QEMU drive over an AHCI interface,
you get:
[ 1.632121] ata1.00: applying bridge limits
This happens due to the kernel not believing the given drive is SATA,
since word 93 of IDENTIFY (ATA_ID_HW_CONFIG) is non-zero. The result is
a pretty severe limit in max_hw_sectors_kb, which limits our IO sizes.
QEMU has set word 93 erroneously for SATA drives but does not, in any
way, emulate any of these real hardware details. There is no PATA
drive and no SATA cable.
As such, add a BRIDGE_OK quirk for QEMU HARDDISK. Special care is taken
to limit this quirk to "2.5+", to allow for fixed future versions.
This results in the max_hw_sectors being limited solely by the
controller interface's limits. Which, for AHCI controllers, takes it
from 128KB to 32767KB.
Cc: stable@vger.kernel.org
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 15:35:45 +0000 (07:35 -0800)]
Merge branch 'maintainers-annual-cleanup-of-inactive-maintainers'
Jakub Kicinski says:
====================
MAINTAINERS: annual cleanup of inactive maintainers
Annual cleanup of inactive maintainers under networking.
The goal is to make sure MAINTAINERS reflect reality for
code which is relatively actively changed (at least 70 commits
in the last 2 years or at least 120 commits in the last 5 years).
Those who either:
- were the initial author / "upstreamer" of the driver; or
- authored at least 1/3rd of the exiting code base (per git blame); or
- authored at least 25% of commits before becoming inactive
are moved to CREDITS.
The discovery of inactive maintainers was done using gitdm tools,
with a bunch of ad-hoc scripts on top to do the rest. I tried to
double check the results but this is mostly a scripted cleanup
so please report inaccuracies if any.
====================
Link: https://patch.msgid.link/20260303215339.2333548-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:11 +0000 (13:53 -0800)]
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
We have not seen emails or tags from Thomas's IBM address
(tlfalcon@linux.ibm.com) in over 5 years. Looks like Thomas
is active in perf tooling at Intel (thomas.falcon@intel.com).
Subsystem IBM Power SRIOV Virtual NIC Device Driver
Changes 49 / 134 (36%)
Last activity: 2025-08-26
Haren Myneni <haren@linux.ibm.com>:
Tags
3c14917953a5 2025-08-26 00:00:00 2
Rick Lindsley <ricklind@linux.ibm.com>:
Nick Child <nnac123@linux.ibm.com>:
Author
d93a6caab5d7 2025-03-25 00:00:00 14
Tags
d93a6caab5d7 2025-03-25 00:00:00 16
Thomas Falcon <tlfalcon@linux.ibm.com>:
Top reviewers:
[22]: drt@linux.ibm.com
[13]: horms@kernel.org
[9]: ricklind@linux.vnet.ibm.com
[3]: davemarq@linux.ibm.com
INACTIVE MAINTAINER Thomas Falcon <tlfalcon@linux.ibm.com>
Move Thomas to CREDITS as the initial author of ibmvnic.
Acked-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://patch.msgid.link/20260303215339.2333548-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:10 +0000 (13:53 -0800)]
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
We have not seen tags from Claudiu for the Ocelot switch driver
in over 5 years. He is active upstream in other NXP subsystems
(ENETC, gianfar), with 46 emails on lore since 2024.
We have not seen tags from Alexandre for the Ocelot switch driver
in over 5 years. He is very active upstream in other subsystems
(RTC, I3C, Atmel/Microchip SoC), with over 1,200 emails on lore
since 2024.
Vladimir Oltean is active.
Subsystem OCELOT ETHERNET SWITCH DRIVER
Changes 180 / 494 (36%)
Last activity: 2026-02-12
Vladimir Oltean <vladimir.oltean@nxp.com>:
Author
c22ba07c827f 2026-02-10 00:00:00 33
Tags
026f6513c588 2026-02-12 00:00:00 39
Claudiu Manoil <claudiu.manoil@nxp.com>:
Alexandre Belloni <alexandre.belloni@bootlin.com>:
Top reviewers:
[49]: f.fainelli@gmail.com
[19]: horms@kernel.org
[10]: richardcochran@gmail.com
[9]: jacob.e.keller@intel.com
[8]: colin.foster@in-advantage.com
INACTIVE MAINTAINER Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260303215339.2333548-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:09 +0000 (13:53 -0800)]
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
We have not seen emails or tags from Taras in over 5 years,
and there is no recent mailing list activity.
Elad Nachman has been providing reviews in the last couple
of years and is the top reviewer for this subsystem.
Subsystem MARVELL PRESTERA ETHERNET SWITCH DRIVER
Changes 39 / 157 (24%)
(No activity)
Top reviewers:
[8]: enachman@marvell.com
[6]: horms@kernel.org
[4]: idosch@nvidia.com
[3]: andrew@lunn.ch
[3]: jacob.e.keller@intel.com
[3]: jiri@nvidia.com
INACTIVE MAINTAINER Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://patch.msgid.link/20260303215339.2333548-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:08 +0000 (13:53 -0800)]
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
We have not seen emails or tags from Jonathan in over 5 years,
and there is no recent mailing list activity.
Vadim Fedorenko is active.
Subsystem OPENCOMPUTE PTP CLOCK DRIVER
Changes 49 / 130 (37%)
Last activity: 2025-11-25
Jonathan Lemon <jonathan.lemon@gmail.com>:
Vadim Fedorenko <vadim.fedorenko@linux.dev>:
Author
d3ca2ef0c915 2025-09-19 00:00:00 5
Tags
648282e2d1e5 2025-11-25 00:00:00 20
Top reviewers:
[7]: horms@kernel.org
[4]: jiri@nvidia.com
[3]: richardcochran@gmail.com
[2]: aleksandr.loktionov@intel.com
INACTIVE MAINTAINER Jonathan Lemon <jonathan.lemon@gmail.com>
Add Jonathan to CREDITS as the initial author of ptp_ocp.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260303215339.2333548-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:07 +0000 (13:53 -0800)]
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
We have not seen tags from Clark for FEC in over 5 years.
He has some limited recent activity on the mailing list in other
NXP subsystems (stmmac, phy). Wei Fang and Shenwei Wang are active,
with decent review coverage (61%).
Frank Li has been reviewing code actively more recenty, let's
make it official.
Subsystem FREESCALE IMX / MXC FEC DRIVER
Changes 57 / 92 (61%)
Last activity: 2026-02-10
Wei Fang <wei.fang@nxp.com>:
Author
25eb3058eb70 2026-02-10 00:00:00 33
Tags
25eb3058eb70 2026-02-10 00:00:00 61
Shenwei Wang <shenwei.wang@nxp.com>:
Author
d466c16026e9 2025-09-14 00:00:00 6
Tags
d466c16026e9 2025-09-14 00:00:00 6
Clark Wang <xiaoning.wang@nxp.com>:
Top reviewers:
[23]: Frank.Li@nxp.com
[17]: andrew@lunn.ch
[4]: csokas.bence@prolan.hu
[3]: horms@kernel.org
[2]: maxime.chevallier@bootlin.com
INACTIVE MAINTAINER Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260303215339.2333548-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:06 +0000 (13:53 -0800)]
MAINTAINERS: remove DENG Qingfang from MediaTek switch
We have not seen tags from DENG Qingfang for the MediaTek
switch driver in over 5 years. He is active upstream with
PPP/PPPoE patches in net-next. Chester and Daniel are active.
Subsystem MEDIATEK SWITCH DRIVER
Changes 26 / 70 (37%)
Last activity: 2025-12-01
Chester A. Unal <chester.a.unal@arinc9.com>:
Tags
585943b7ad30 2025-12-01 00:00:00 7
Daniel Golle <daniel@makrotopia.org>:
Author
497041d76301 2025-04-23 00:00:00 2
Tags
3b87e60d2131 2025-12-01 00:00:00 14
DENG Qingfang <dqfext@gmail.com>:
Sean Wang <sean.wang@mediatek.com>:
Top reviewers:
[4]: andrew@lunn.ch
[4]: florian.fainelli@broadcom.com
[4]: arinc.unal@arinc9.com
[2]: olteanv@gmail.com
INACTIVE MAINTAINER DENG Qingfang <dqfext@gmail.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20260303215339.2333548-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:05 +0000 (13:53 -0800)]
MAINTAINERS: remove Sean Wang from MediaTek Ethernet and switch
We have not seen tags from Sean in over 5 years,
with only one mailing list post since 2024.
Felix and Lorenzo are active for the Ethernet driver,
and Chester, Daniel and DENG Qingfang are active for
the switch driver.
Subsystem MEDIATEK ETHERNET DRIVER
Changes 55 / 113 (48%)
Last activity: 2025-10-12
Felix Fietkau <nbd@nbd.name>:
Author
d4736737110f 2025-09-02 00:00:00 3
Tags
d4736737110f 2025-09-02 00:00:00 4
Sean Wang <sean.wang@mediatek.com>:
Lorenzo Bianconi <lorenzo@kernel.org>:
Author
96326447d466 2025-08-13 00:00:00 35
Tags
3abc0e55ea1f 2025-10-12 00:00:00 40
Top reviewers:
[26]: horms@kernel.org
[5]: andrew@lunn.ch
[4]: jacob.e.keller@intel.com
[3]: shannon.nelson@amd.com
[3]: michal.swiatkowski@linux.intel.com
INACTIVE MAINTAINER Sean Wang <sean.wang@mediatek.com>
Subsystem MEDIATEK SWITCH DRIVER
Changes 26 / 70 (37%)
Last activity: 2025-12-01
Chester A. Unal <chester.a.unal@arinc9.com>:
Tags
585943b7ad30 2025-12-01 00:00:00 7
Daniel Golle <daniel@makrotopia.org>:
Author
497041d76301 2025-04-23 00:00:00 2
Tags
3b87e60d2131 2025-12-01 00:00:00 14
DENG Qingfang <dqfext@gmail.com>:
Sean Wang <sean.wang@mediatek.com>:
Top reviewers:
[4]: andrew@lunn.ch
[4]: florian.fainelli@broadcom.com
[4]: arinc.unal@arinc9.com
[2]: olteanv@gmail.com
INACTIVE MAINTAINER Sean Wang <sean.wang@mediatek.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20260303215339.2333548-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:03 +0000 (13:53 -0800)]
MAINTAINERS: remove Jerin Jacob from Marvell OcteonTX2
We have not seen tags from Jerin for OcteonTX2 in over 5 years.
Recent lore activity is in DPDK (non-kernel), not Linux.
Sunil, Linu, Geetha, hariprasad, and Subbaraya are active,
though the review coverage isn't great (38%).
Subsystem MARVELL OCTEONTX2 RVU ADMIN FUNCTION DRIVER
Changes 53 / 138 (38%)
Last activity: 2026-02-18
Sunil Goutham <sgoutham@marvell.com>:
Author
fc1b2901e0fe 2024-03-08 00:00:00 1
Tags
70f8986ecef1 2025-06-16 00:00:00 9
Linu Cherian <lcherian@marvell.com>:
Author
a861e5809f3e 2025-10-30 00:00:00 7
Tags
a861e5809f3e 2025-10-30 00:00:00 7
Geetha sowjanya <gakula@marvell.com>:
Author
70e9a5760abf 2026-01-29 00:00:00 16
Tags
70e9a5760abf 2026-01-29 00:00:00 20
Jerin Jacob <jerinj@marvell.com>:
hariprasad <hkelam@marvell.com>:
Author
45be47bf5d7d 2026-02-18 00:00:00 22
Tags
45be47bf5d7d 2026-02-18 00:00:00 25
Subbaraya Sundeep <sbhatta@marvell.com>:
Author
47a1208776d7 2025-10-30 00:00:00 20
Tags
47a1208776d7 2025-10-30 00:00:00 30
Top reviewers:
[36]: horms@kernel.org
[4]: jacob.e.keller@intel.com
[4]: kalesh-anakkur.purayil@broadcom.com
[3]: vadim.fedorenko@linux.dev
[2]: shaojijie@huawei.com
[2]: jiri@nvidia.com
INACTIVE MAINTAINER Jerin Jacob <jerinj@marvell.com>
Link: https://patch.msgid.link/20260303215339.2333548-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:02 +0000 (13:53 -0800)]
MAINTAINERS: remove Manish Chopra from QLogic QL4xxx (now orphan)
We have not seen tags from Manish for the QL4xxx driver in over 5 years,
and there is no mailing list activity since Oct 2023. There has been
no maintainer activity in this subsystem at all.
Since there is no other maintainer for this driver it becomes an Orphan.
Subsystem QLOGIC QL4xxx ETHERNET DRIVER
Changes 40 / 74 (54%)
(No activity)
Top reviewers:
[30]: horms@kernel.org
[2]: jiri@nvidia.com
[2]: shannon.nelson@amd.com
[1]: saeedm@nvidia.com
[1]: aleksandr.loktionov@intel.com
[1]: kory.maincent@bootlin.com
INACTIVE MAINTAINER Manish Chopra <manishc@marvell.com>
Link: https://patch.msgid.link/20260303215339.2333548-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 21:53:01 +0000 (13:53 -0800)]
MAINTAINERS: remove Johan Hedberg from Bluetooth subsystem
We have not seen emails or tags from Johan in over 5 years,
and there is no recent mailing list activity.
Marcel Holtmann hasn't provided any tags in the Bluetooth
subsystem in over 5 years, but he is active on the Bluetooth
mailing list, providing informal review.
Luiz Augusto von Dentz is very active, handling essentially
all commits and reviews (12% coverage, but Luiz is the sole
active committer).
Subsystem BLUETOOTH SUBSYSTEM
Changes 50 / 411 (12%)
Last activity: 2026-02-23
Marcel Holtmann <marcel@holtmann.org>:
Johan Hedberg <johan.hedberg@gmail.com>:
Luiz Augusto von Dentz <luiz.dentz@gmail.com>:
Author
138d7eca445e 2026-02-23 00:00:00 164
Committer
138d7eca445e 2026-02-23 00:00:00 361
Tags
138d7eca445e 2026-02-23 00:00:00 362
Top reviewers:
[15]: pmenzel@molgen.mpg.de
[8]: keescook@chromium.org
[5]: willemb@google.com
[4]: horms@kernel.org
[3]: kuniyu@amazon.com
[3]: luiz.von.dentz@intel.com
INACTIVE MAINTAINER Johan Hedberg <johan.hedberg@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://patch.msgid.link/20260303215339.2333548-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sun Jian [Wed, 25 Feb 2026 11:14:51 +0000 (19:14 +0800)]
selftests: net: tun: don't abort XFAIL cases
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sun Jian [Wed, 25 Feb 2026 11:14:50 +0000 (19:14 +0800)]
selftests/harness: order TEST_F and XFAIL_ADD constructors
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes:
2709473c9386 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 15:33:25 +0000 (07:33 -0800)]
Merge tag 'nf-26-03-05' of https://git./linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) Inseo An reported a bug with the set element handling in nf_tables:
When set cannot accept more elements, we unlink and immediately free
an element that was inserted into a public data structure, freeing it
without waiting for RCU grace period. Fix this by doing the
increment earlier and by deferring possible unlink-and-free to the
existing abort path, which performs the needed synchronize_rcu before
free. From Pablo Neira Ayuso. This is an ancient bug, dating back to
kernel 4.10.
2) syzbot reported WARN_ON() splat in nf_tables that occurs on memory
allocation failure. Fix this by a new iterator annotation:
The affected walker does not need to clone the data structure and
can just use the live version if no clone exists yet.
Also from Pablo. This bug existed since 6.10 days.
3) Ancient forever bug in nft_pipapo data structure:
The garbage collection logic to remove expired elements is broken.
We must unlink from data structure and can only hand the freeing
to call_rcu after the clone/live pointers of the data structures
have been swapped. Else, readers can observe the free'd element.
Reported by Yiming Qian.
* tag 'nf-26-03-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
netfilter: nf_tables: clone set on flush only
netfilter: nf_tables: unconditionally bump set->nelems before insertion
====================
Link: https://patch.msgid.link/20260305122635.23525-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jerome Marchand [Thu, 5 Mar 2026 09:31:17 +0000 (10:31 +0100)]
ftrace: Add MAINTAINERS entries for all ftrace headers
There is currently no entry for ftrace_irq.h and ftrace_regs.h. Add a
generic entry for all *ftrace* headers to include them and prevent
overlooking future ftrace headers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260305093117.853700-1-jmarchan@redhat.com
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Lorenzo Bianconi [Tue, 3 Mar 2026 17:56:39 +0000 (18:56 +0100)]
net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup()
Reset eBPF program pointer to old_prog and do not decrease its ref-count
if mtk_open routine in mtk_xdp_setup() fails.
Fixes:
7c26c20da5d42 ("net: ethernet: mtk_eth_soc: add basic XDP support")
Suggested-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303-mtk-xdp-prog-ptr-fix-v2-1-97b6dbbe240f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Maarten Lankhorst [Thu, 5 Mar 2026 11:37:34 +0000 (12:37 +0100)]
Revert "drm/syncobj: Fix handle <-> fd ioctls with dirty stack"
This reverts commit
2e3649e237237258a08d75afef96648dd2b379f7.
The problem occurs when userspace is compiled against new headers
with new members, but don't correctly initialise those new members.
This is not a kernel problem, and should be fixed in userspace by
correctly zero'ing all members.
Cc: Rob Clark <robdclark@chromium.org>
Cc: Julian Orth <ju.orth@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Julian Orth <ju.orth@gmail.com>
Link: https://patch.msgid.link/20260305113734.1309238-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Johan Hovold [Thu, 5 Mar 2026 11:18:10 +0000 (12:18 +0100)]
ALSA: us122l: drop redundant interface references
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Similarly, USB core holds a reference to all interfaces in the active
configuration so there is no need for a driver to take a reference to a
sibling interface only to release it at disconnect either.
Drop the redundant references to reduce cargo culting, make it easier to
spot drivers where extra references are needed, and reduce the risk of
memory leaks when drivers fail to release them.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111810.18688-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Florian Westphal [Tue, 3 Mar 2026 15:31:32 +0000 (16:31 +0100)]
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pablo Neira Ayuso [Mon, 2 Mar 2026 22:28:15 +0000 (23:28 +0100)]
netfilter: nf_tables: clone set on flush only
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:
ffffc900045af780 EFLAGS:
00010293
RAX:
ffffffff89ca45bd RBX:
00000000fffffff4 RCX:
ffff888028111e40
RDX:
0000000000000000 RSI:
00000000fffffff4 RDI:
0000000000000000
RBP:
ffffc900045af870 R08:
0000000000400dc0 R09:
00000000ffffffff
R10:
dffffc0000000000 R11:
fffffbfff1d141db R12:
ffffc900045af7e0
R13:
1ffff920008b5f24 R14:
dffffc0000000000 R15:
ffffc900045af920
FS:
000055557a6a5500(0000) GS:
ffff888125496000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fb5ea271fc0 CR3:
000000003269e000 CR4:
00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path.
Reported-by: syzbot+4924a0edc148e8b4b342@syzkaller.appspotmail.com
Fixes:
3f1d886cc7c3 ("netfilter: nft_set_pipapo: move cloning of match info to insert/removal path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pablo Neira Ayuso [Mon, 2 Mar 2026 22:12:37 +0000 (23:12 +0100)]
netfilter: nf_tables: unconditionally bump set->nelems before insertion
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches.
Fixes:
35d0ac9070ef ("netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCL")
Reported-by: Inseo An <y0un9sa@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Sebastian Andrzej Siewior [Mon, 2 Mar 2026 16:26:31 +0000 (17:26 +0100)]
net: Provide a PREEMPT_RT specific check for netdev_queue::_xmit_lock
After acquiring netdev_queue::_xmit_lock the number of the CPU owning
the lock is recorded in netdev_queue::xmit_lock_owner. This works as
long as the BH context is not preemptible.
On PREEMPT_RT the softirq context is preemptible and without the
softirq-lock it is possible to have multiple user in __dev_queue_xmit()
submitting a skb on the same CPU. This is fine in general but this means
also that the current CPU is recorded as netdev_queue::xmit_lock_owner.
This in turn leads to the recursion alert and the skb is dropped.
Instead checking the for CPU number, that owns the lock, PREEMPT_RT can
check if the lockowner matches the current task.
Add netif_tx_owned() which returns true if the current context owns the
lock by comparing the provided CPU number with the recorded number. This
resembles the current check by negating the condition (the current check
returns true if the lock is not owned).
On PREEMPT_RT use rt_mutex_owner() to return the lock owner and compare
the current task against it.
Use the new helper in __dev_queue_xmit() and netif_local_xmit_active()
which provides a similar check.
Update comments regarding pairing READ_ONCE().
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/
20260216134333.412332-1-spasswolf@web.de
Fixes:
3253cb49cbad4 ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260302162631.uGUyIqDT@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ming Lei [Thu, 5 Mar 2026 03:15:50 +0000 (11:15 +0800)]
block: use trylock to avoid lockdep circular dependency in sysfs
Use trylock instead of blocking lock acquisition for update_nr_hwq_lock
in queue_requests_store() and elv_iosched_store() to avoid circular lock
dependency with kernfs active reference during concurrent disk deletion:
update_nr_hwq_lock -> kn->active (via del_gendisk -> kobject_del)
kn->active -> update_nr_hwq_lock (via sysfs write path)
Return -EBUSY when the lock is not immediately available.
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs-em-4acsHabMdT=jJhXkCzjnprD-aQH1OgrZo4nTnmMw@mail.gmail.com/
Fixes:
626ff4f8ebcb ("blk-mq: convert to serialize updating nr_requests with update_nr_hwq_lock")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thadeu Lima de Souza Cascardo [Wed, 4 Mar 2026 23:27:52 +0000 (20:27 -0300)]
drm/ttm: Fix bo resource use-after-free
When allocating a lot of buffers and putting the TTM under memory pressure,
during swapout, it might crash the system with the stack trace below.
It turns out that ttm_bo_swapout_cb might replace bo->resource when it
moves it to system cached.
When commit
c06da4b3573a ("drm/ttm: Tidy usage of local variables a little
bit") used a local variable for bo->resource, it used the freed resource
later in the function, leading to a UAF.
Move back to using bo->resource in all cases in that function instead of a
local variable.
[ 604.814275] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 604.814284] #PF: supervisor read access in kernel mode
[ 604.814288] #PF: error_code(0x0000) - not-present page
[ 604.814291] PGD 0 P4D 0
[ 604.814296] Oops: Oops: 0000 [#1] SMP NOPTI
[ 604.814303] CPU: 2 UID: 0 PID: 4408 Comm: vulkan Tainted: G W
7.0.0-rc2-00001-gc50a051e6aca #21 PREEMPT(full)
aef6eb0c02036a7c8a5e62e0c84a30c2be90688d
[ 604.814309] Tainted: [W]=WARN
[ 604.814311] Hardware name: Valve Jupiter/Jupiter, BIOS
F7A0133 08/05/2024
[ 604.814314] RIP: 0010:ttm_resource_move_to_lru_tail+0x100/0x160 [ttm]
[ 604.814329] Code: 5b 5d e9 83 b4 1b cb 48 63 d2 48 c1 e0 04 48 8b 4e 40 48 8d 7e 40 48 8b ac d3 d8 00 00 00 48 89 c3 48 8d 54 05 68 48 8b 46 48 <48> 3b 38 0f 85 b3 3b 00 00 48 3b 79 08 0f 85 a9 3b 00 00 48 89 41
[ 604.814332] RSP: 0018:
ffffcfe54e3d7578 EFLAGS:
00010256
[ 604.814336] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffff8cf09eced300
[ 604.814339] RDX:
0000000000000068 RSI:
ffff8cf1d4c1fc00 RDI:
ffff8cf1d4c1fc40
[ 604.814341] RBP:
0000000000000000 R08:
ffff8cf09eced300 R09:
0000000000000000
[ 604.814344] R10:
0000000000000000 R11:
0000000000000016 R12:
ffff8cf1d4c1fc00
[ 604.814346] R13:
0000000000000400 R14:
ffff8cf096289c00 R15:
ffff8cf084c8f688
[ 604.814349] FS:
00007f00531b7780(0000) GS:
ffff8cf4217a0000(0000) knlGS:
0000000000000000
[ 604.814352] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 604.814355] CR2:
0000000000000000 CR3:
000000018e3df000 CR4:
0000000000350ef0
[ 604.814358] Call Trace:
[ 604.814362] <TASK>
[ 604.814368] ttm_bo_swapout_cb+0x24c/0x280 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814380] ttm_lru_walk_for_evict+0xac/0x1d0 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814394] ttm_bo_swapout+0x5b/0x80 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814405] ttm_global_swapout+0x63/0x100 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814415] ttm_tt_populate+0x82/0x130 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814424] ttm_bo_populate+0x37/0xa0 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814433] ttm_bo_handle_move_mem+0x157/0x170 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814443] ttm_bo_validate+0xd9/0x180 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814453] ttm_bo_init_reserved+0xa0/0x1b0 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.814461] ? srso_return_thunk+0x5/0x5f
[ 604.814469] amdgpu_bo_create+0x1f5/0x500 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.814855] ? __pfx_amdgpu_bo_user_destroy+0x10/0x10 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.815182] amdgpu_bo_create_user+0x3d/0x70 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.815504] amdgpu_gem_create_ioctl+0x16c/0x3b0 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.815830] ? __pfx_amdgpu_bo_user_destroy+0x10/0x10 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.816155] ? __pfx_amdgpu_gem_create_ioctl+0x10/0x10 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.816478] drm_ioctl_kernel+0xae/0x100
[ 604.816486] drm_ioctl+0x283/0x510
[ 604.816491] ? __pfx_amdgpu_gem_create_ioctl+0x10/0x10 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.816819] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.817135] __x64_sys_ioctl+0x96/0xe0
[ 604.817142] do_syscall_64+0x11b/0x7e0
[ 604.817148] ? srso_return_thunk+0x5/0x5f
[ 604.817152] ? srso_return_thunk+0x5/0x5f
[ 604.817156] ? walk_system_ram_range+0xb0/0x110
[ 604.817161] ? srso_return_thunk+0x5/0x5f
[ 604.817165] ? __pte_offset_map+0x1b/0xb0
[ 604.817170] ? srso_return_thunk+0x5/0x5f
[ 604.817174] ? pte_offset_map_lock+0x87/0xf0
[ 604.817179] ? srso_return_thunk+0x5/0x5f
[ 604.817183] ? insert_pfn+0x9f/0x1f0
[ 604.817188] ? srso_return_thunk+0x5/0x5f
[ 604.817192] ? vmf_insert_pfn_prot+0x97/0x190
[ 604.817197] ? srso_return_thunk+0x5/0x5f
[ 604.817201] ? ttm_bo_vm_fault_reserved+0x1a6/0x3f0 [ttm
a469cf7fcb6737fdcf3fb5cdbcc8b1ca41f3e302]
[ 604.817213] ? srso_return_thunk+0x5/0x5f
[ 604.817217] ? amdgpu_gem_fault+0xe2/0x100 [amdgpu
361516226706227f4403914dbfdd3f90996136ca]
[ 604.817542] ? srso_return_thunk+0x5/0x5f
[ 604.817546] ? __do_fault+0x33/0x180
[ 604.817550] ? srso_return_thunk+0x5/0x5f
[ 604.817554] ? do_fault+0x178/0x610
[ 604.817559] ? srso_return_thunk+0x5/0x5f
[ 604.817562] ? __handle_mm_fault+0x9be/0x1120
[ 604.817567] ? srso_return_thunk+0x5/0x5f
[ 604.817574] ? srso_return_thunk+0x5/0x5f
[ 604.817578] ? count_memcg_events+0xc4/0x160
[ 604.817583] ? srso_return_thunk+0x5/0x5f
[ 604.817587] ? handle_mm_fault+0x1d7/0x2e0
[ 604.817593] ? srso_return_thunk+0x5/0x5f
[ 604.817596] ? do_user_addr_fault+0x173/0x660
[ 604.817602] ? srso_return_thunk+0x5/0x5f
[ 604.817607] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 604.817612] RIP: 0033:0x7f00532cef4d
[ 604.817617] Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
[ 604.817620] RSP: 002b:
00007ffd69ab0650 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 604.817624] RAX:
ffffffffffffffda RBX:
00007ffd69ab07d0 RCX:
00007f00532cef4d
[ 604.817627] RDX:
00007ffd69ab0700 RSI:
00000000c0206440 RDI:
0000000000000005
[ 604.817629] RBP:
00007ffd69ab06a0 R08:
00007f00533a0ac0 R09:
0000000000000000
[ 604.817632] R10:
00007ffd69ab07c0 R11:
0000000000000246 R12:
00007ffd69ab0700
[ 604.817634] R13:
00000000c0206440 R14:
0000000000000005 R15:
0000000000000243
[ 604.817642] </TASK>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Fixes:
c06da4b3573a ("drm/ttm: Tidy usage of local variables a little bit")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260304-ttm_bo_res_uaf-v1-1-43f20125b67f@igalia.com
Jakub Kicinski [Thu, 5 Mar 2026 02:48:51 +0000 (18:48 -0800)]
Merge branch 'net-stmmac-fix-vlan-handling-when-interface-is-down'
Ovidiu Panait says:
====================
net: stmmac: Fix VLAN handling when interface is down
VLAN register accesses on the MAC side require the PHY RX clock to be
active. When the network interface is down, the PHY is suspended and
the RX clock is unavailable, causing VLAN operations to fail with
timeouts.
The VLAN core automatically removes VID 0 after the interface goes down
and re-adds it when it comes back up, so these timeouts happen during
normal interface down/up:
# ip link set end1 down
renesas-gbeth
15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
renesas-gbeth
15c40000.ethernet end1: failed to kill vid 0081/0
Adding VLANs while the interface is down also fails:
# ip link add link end1 name end1.10 type vlan id 10
renesas-gbeth
15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
RTNETLINK answers: Device or resource busy
Patch 4 fixes this by adding checks in the VLAN paths for netif_running(),
and skipping register accesses if the interface is down. Only the software
state is updated in this case. When the interface is brought up, the VLAN
state is restored to hardware.
Patches 1-3 fix some issues in the existing VLAN implementation.
====================
Link: https://patch.msgid.link/20260303145828.7845-1-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ovidiu Panait [Tue, 3 Mar 2026 14:58:28 +0000 (14:58 +0000)]
net: stmmac: Defer VLAN HW configuration when interface is down
VLAN register accesses on the MAC side require the PHY RX clock to be
active. When the network interface is down, the PHY is suspended and
the RX clock is unavailable, causing VLAN operations to fail with
timeouts.
The VLAN core automatically removes VID 0 after the interface goes down
and re-adds it when it comes back up, so these timeouts happen during
normal interface down/up:
# ip link set end1 down
renesas-gbeth
15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
renesas-gbeth
15c40000.ethernet end1: failed to kill vid 0081/0
Adding VLANs while the interface is down also fails:
# ip link add link end1 name end1.10 type vlan id 10
renesas-gbeth
15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
RTNETLINK answers: Device or resource busy
To fix this, check if the interface is up before accessing VLAN registers.
The software state is always kept up to date regardless of interface state.
When the interface is brought up, stmmac_vlan_restore() is called
to write the VLAN state to hardware.
Fixes:
ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Link: https://patch.msgid.link/20260303145828.7845-5-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ovidiu Panait [Tue, 3 Mar 2026 14:58:27 +0000 (14:58 +0000)]
net: stmmac: Fix VLAN HW state restore
When the network interface is opened or resumed, a DMA reset is performed,
which resets all hardware state, including VLAN state. Currently, only
the resume path is restoring the VLAN state via
stmmac_restore_hw_vlan_rx_fltr(), but that is incomplete: the VLAN hash
table and the VLAN_TAG control bits are not restored.
Therefore, add stmmac_vlan_restore(), which restores the full VLAN
state by updating both the HW filter entries and the hash table, and
call it from both the open and resume paths.
The VLAN restore is moved outside of phylink_rx_clk_stop_block/unblock
in the resume path because receive clock stop is already disabled when
stmmac supports VLAN.
Also, remove the hash readback code in vlan_restore_hw_rx_fltr() that
attempts to restore VTHM by reading VLAN_HASH_TABLE, as it always reads
zero after DMA reset, making it dead code.
Fixes:
3cd1cfcba26e ("net: stmmac: Implement VLAN Hash Filtering in XGMAC")
Fixes:
ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Link: https://patch.msgid.link/20260303145828.7845-4-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ovidiu Panait [Tue, 3 Mar 2026 14:58:26 +0000 (14:58 +0000)]
net: stmmac: Improve double VLAN handling
The double VLAN bits (EDVLP, ESVL, DOVLTC) are handled inconsistently
between the two vlan_update_hash() implementations:
- dwxgmac2_update_vlan_hash() explicitly clears the double VLAN bits when
is_double is false, meaning that adding a 802.1Q VLAN will disable
double VLAN mode:
$ ip link add link eth0 name eth0.200 type vlan id 200 protocol 802.1ad
$ ip link add link eth0 name eth0.100 type vlan id 100
# Double VLAN bits no longer set
- vlan_update_hash() sets these bits and only clears them when the last
VLAN has been removed, so double VLAN mode remains enabled even after all
802.1AD VLANs are removed.
Address both issues by tracking the number of active 802.1AD VLANs in
priv->num_double_vlans. Pass this count to stmmac_vlan_update() so both
implementations correctly set the double VLAN bits when any 802.1AD
VLAN is active, and clear them only when none remain.
Also update vlan_update_hash() to explicitly clear the double VLAN bits
when is_double is false, matching the dwxgmac2 behavior.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Link: https://patch.msgid.link/20260303145828.7845-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ovidiu Panait [Tue, 3 Mar 2026 14:58:25 +0000 (14:58 +0000)]
net: stmmac: Fix error handling in VLAN add and delete paths
stmmac_vlan_rx_add_vid() updates active_vlans and the VLAN hash
register before writing the HW filter entry. If the filter write
fails, it leaves a stale VID in active_vlans and the hash register.
stmmac_vlan_rx_kill_vid() has the reverse problem: it clears
active_vlans before removing the HW filter. On failure, the VID is
gone from active_vlans but still present in the HW filter table.
To fix this, reorder the operations to update the hash table first,
then attempt the HW filter operation. If the HW filter fails, roll
back both the active_vlans bitmap and the hash table by calling
stmmac_vlan_update() again.
Fixes:
ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Link: https://patch.msgid.link/20260303145828.7845-2-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 02:35:35 +0000 (18:35 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-03-03 (ice, libie, iavf, igb, igc)
Larysa removes VF restriction for LLDP filters on ice to allow for LLDP
traffic to reach the correct destination.
Jakub adds retry mechanism for AdminQ Read/Write SFF EEPROM call to
follow hardware specification on ice.
Zilin Guan adds cleanup path to free XDP rings on failure in
ice_set_ringparam().
Michal bypasses firmware logging unroll in libie when it isn't supported.
Kohei Enju fixes iavf to take into account hardware MTU support when
setting max MTU values.
Vivek Behera fixes issues on igb and igc using incorrect IRQs when Tx/Rx
queues do not share the same IRQ.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix trigger of incorrect irq in igc_xsk_wakeup function
igb: Fix trigger of incorrect irq in igb_xsk_wakeup
iavf: fix netdev->max_mtu to respect actual hardware limit
libie: don't unroll if fwlog isn't supported
ice: Fix memory leak in ice_set_ringparam()
ice: fix retry for AQ command 0x06EE
ice: reintroduce retry mechanism for indirect AQ
ice: fix adding AQ LLDP filter for VF
====================
Link: https://patch.msgid.link/20260303231155.2895065-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 02:21:15 +0000 (18:21 -0800)]
Merge branch 'mptcp-misc-fixes-for-v7-0-rc2'
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.0-rc2
Here are various unrelated fixes:
- Patch 1: avoid bufferbloat in simult_flows selftest which can cause
instabilities. A fix for v5.10.
- Patches 2-3: reduce RM_ADDR lost by not sending it over the same
subflow as the one being removed, if possible. A fix for v5.13.
- Patches 4-5: avoid a WARN when using signal + subflow endpoints with a
subflow limit of 0, and removing such endpoints during an active
connection. A fix for v5.17.
====================
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-0-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Tue, 3 Mar 2026 10:56:06 +0000 (11:56 +0100)]
selftests: mptcp: join: check removing signal+subflow endp
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes:
85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Tue, 3 Mar 2026 10:56:05 +0000 (11:56 +0100)]
mptcp: pm: in-kernel: always mark signal+subflow endp as used
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted
6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:
ffffc90001663880 EFLAGS:
00010293
RAX:
ffffffff82de1a6c RBX:
0000000000000000 RCX:
ffff88800722b500
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff8880158b22d0 R08:
0000000000010425 R09:
ffffffffffffffff
R10:
ffffffff82de18ba R11:
0000000000000000 R12:
ffff88800641a640
R13:
ffff8880158b1880 R14:
ffff88801ec3c900 R15:
ffff88800641a650
FS:
00005555722c3500(0000) GS:
ffff8880f909d000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f66346e0f60 CR3:
000000001607c000 CR4:
0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffc83d8bdc8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f6634985fa0 RCX:
00007f66346f826d
RDX:
00000000040000b0 RSI:
0000200000000740 RDI:
0000000000000007
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f6634985fa8
R13:
00007f6634985fac R14:
0000000000000000 R15:
0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
In this case, msk->pm.local_addr_used has been kept to 0 -- because no
subflows have been created -- but the corresponding bit in
msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been
sent. This later causes a splat when removing the MPTCP endpoint because
msk->pm.local_addr_used has been kept to 0.
Now, if an endpoint has both the signal and subflow flags, but it is not
possible to create subflows because of the limits or the c-flag case,
then the local endpoint counter is still incremented: the endpoint is
used at the end. This avoids issues later when removing the endpoint and
calling __mark_subflow_endp_available(), which expects
msk->pm.local_addr_used to have been previously incremented if the
endpoint was marked as used according to msk->pm.id_avail_bitmap.
Note that signal_and_subflow variable is reset to false when the limits
and the c-flag case allows subflows creation. Also, local_addr_used is
only incremented for non ID0 subflows.
Fixes:
85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/613
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Tue, 3 Mar 2026 10:56:04 +0000 (11:56 +0100)]
selftests: mptcp: join: check RM_ADDR not sent over same subflow
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes:
8dd5efb1f91b ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Tue, 3 Mar 2026 10:56:03 +0000 (11:56 +0100)]
mptcp: pm: avoid sending RM_ADDR over same subflow
RM_ADDR are sent over an active subflow, the first one in the subflows
list. There is then a high chance the initial subflow is picked. With
the in-kernel PM, when an endpoint is removed, a RM_ADDR is sent, then
linked subflows are closed. This is done for each active MPTCP
connection.
MPTCP endpoints are likely removed because the attached network is no
longer available or usable. In this case, it is better to avoid sending
this RM_ADDR over the subflow that is going to be removed, but prefer
sending it over another active and non stale subflow, if any.
This modification avoids situations where the other end is not notified
when a subflow is no longer usable: typically when the endpoint linked
to the initial subflow is removed, especially on the server side.
Fixes:
8dd5efb1f91b ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reported-by: Frank Lorenz <lorenz-frank@web.de>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/612
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-2-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 3 Mar 2026 10:56:02 +0000 (11:56 +0100)]
selftests: mptcp: more stable simult_flows tests
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes:
1a418cb8e888 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Mar 2026 02:15:51 +0000 (18:15 -0800)]
Merge branch 'nfc-fix-leaks-and-races-surfaced-by-nipa'
Jakub Kicinski says:
====================
nfc: fix leaks and races surfaced by NIPA
I recently added the nci test to NIPA. Somewhat surprisingly it runs
without much settup but hits kmemleaks fairly often. Fix a handful of
issues to make the test pass in a stable way.
====================
Link: https://patch.msgid.link/20260303162346.2071888-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 16:23:45 +0000 (08:23 -0800)]
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs.
Fixes:
23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 16:23:44 +0000 (08:23 -0800)]
nfc: nci: clear NCI_DATA_EXCHANGE before calling completion callback
Move clear_bit(NCI_DATA_EXCHANGE) before invoking the data exchange
callback in nci_data_exchange_complete().
The callback (e.g. rawsock_data_exchange_complete) may immediately
schedule another data exchange via schedule_work(tx_work). On a
multi-CPU system, tx_work can run and reach nci_transceive() before
the current nci_data_exchange_complete() clears the flag, causing
test_and_set_bit(NCI_DATA_EXCHANGE) to return -EBUSY and the new
transfer to fail.
This causes intermittent flakes in nci/nci_dev in NIPA:
# # RUN NCI.NCI1_0.t4t_tag_read ...
# # t4t_tag_read: Test terminated by timeout
# # FAIL NCI.NCI1_0.t4t_tag_read
# not ok 3 NCI.NCI1_0.t4t_tag_read
Fixes:
38f04c6b1b68 ("NFC: protect nci_data_exchange transactions")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 16:23:43 +0000 (08:23 -0800)]
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies
4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc
ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes:
38f04c6b1b68 ("NFC: protect nci_data_exchange transactions")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 16:23:42 +0000 (08:23 -0800)]
nfc: digital: free skb on digital_in_send error paths
digital_in_send() takes ownership of the skb passed by the caller
(nfc_data_exchange), make sure it's freed on all error paths.
Found looking around the real driver for similar bugs to the one
just fixed in nci.
Fixes:
2c66daecc409 ("NFC Digital: Add NFC-A technology support")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Mar 2026 16:23:41 +0000 (08:23 -0800)]
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies
4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc
7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0
Fixes:
6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bobby Eshleman [Tue, 3 Mar 2026 00:32:56 +0000 (16:32 -0800)]
net: devmem: use READ_ONCE/WRITE_ONCE on binding->dev
binding->dev is protected on the write-side in
mp_dmabuf_devmem_uninstall() against concurrent writes, but due to the
concurrent bare reads in net_devmem_get_binding() and
validate_xmit_unreadable_skb() it should be wrapped in a
READ_ONCE/WRITE_ONCE pair to make sure no compiler optimizations play
with the underlying register in unforeseen ways.
Doesn't present a critical bug because the known compiler optimizations
don't result in bad behavior. There is no tearing on u64, and load
omissions/invented loads would only break if additional binding->dev
references were inlined together (they aren't right now).
This just more strictly follows the linux memory model (i.e.,
"Lock-Protected Writes With Lockless Reads" in
tools/memory-model/Documentation/access-marking.txt).
Fixes:
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260302-devmem-membar-fix-v2-1-5b33c9cbc28b@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 4 Mar 2026 01:56:40 +0000 (01:56 +0000)]
net_sched: sch_fq: clear q->band_pkt_count[] in fq_reset()
When/if a NIC resets, queues are deactivated by dev_deactivate_many(),
then reactivated when the reset operation completes.
fq_reset() removes all the skbs from various queues.
If we do not clear q->band_pkt_count[], these counters keep growing
and can eventually reach sch->limit, preventing new packets to be queued.
Many thanks to Praveen for discovering the root cause.
Fixes:
29f834aa326e ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Diagnosed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260304015640.961780-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ian Ray [Mon, 2 Mar 2026 16:32:37 +0000 (18:32 +0200)]
net: nfc: nci: Fix zero-length proprietary notifications
NCI NFC controllers may have proprietary OIDs with zero-length payload.
One example is: drivers/nfc/nxp-nci/core.c, NXP_NCI_RF_TXLDO_ERROR_NTF.
Allow a zero length payload in proprietary notifications *only*.
Before:
-- >8 --
kernel: nci: nci_recv_frame: len 3
-- >8 --
After:
-- >8 --
kernel: nci: nci_recv_frame: len 3
kernel: nci: nci_ntf_packet: NCI RX: MT=ntf, PBF=0, GID=0x1, OID=0x23, plen=0
kernel: nci: nci_ntf_packet: unknown ntf opcode 0x123
kernel: nfc nfc0: NFC: RF transmitter couldn't start. Bad power and/or configuration?
-- >8 --
After fixing the hardware:
-- >8 --
kernel: nci: nci_recv_frame: len 27
kernel: nci: nci_ntf_packet: NCI RX: MT=ntf, PBF=0, GID=0x1, OID=0x5, plen=24
kernel: nci: nci_rf_intf_activated_ntf_packet: rf_discovery_id 1
-- >8 --
Fixes:
d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260302163238.140576-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 2 Mar 2026 20:55:27 +0000 (20:55 +0000)]
tcp: secure_seq: add back ports to TS offset
This reverts
28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset.
Fixes:
28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
Reported-by: Zhouyan Deng <dengzhouyan_nwpu@163.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260302205527.1982836-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / linux-2.6-microblaze.git / log