Linus Torvalds [Fri, 17 Sep 2021 16:23:44 +0000 (09:23 -0700)]
Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring iov_iter retry fixes from Jens Axboe:
"This adds a helper to save/restore iov_iter state, and modifies
io_uring to use it.
After that is done, we can now kill the iter->truncated addition that
we added for this release. The io_uring change is being overly
cautious with the save/restore/advance, but better safe than sorry and
we can always improve that and reduce the overhead if it proves to be
of concern. The only case to be worried about in this regard is huge
IO, where iteration can take a while to iterate segments.
I spent some time writing test cases, and expanded the coverage quite
a bit from the last posting of this. liburing carries this regression
test case now:
https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c
which exercises all of this. It now also supports provided buffers,
and explicitly tests for end-of-file/device truncation as well.
On top of that, Pavel sanitized the IOPOLL retry path to follow the
exact same pattern as normal IO"
* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: move iopoll reissue into regular IO path
Revert "iov_iter: track truncated size"
io_uring: use iov_iter state save/restore helpers
iov_iter: add helper to save iov_iter state
Linus Torvalds [Fri, 17 Sep 2021 16:19:59 +0000 (09:19 -0700)]
Merge tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for regressions in this cycle, but also a few fixes that
predate this release.
The odd one out is a tweak to the direct files added in this release,
where attempting to reuse a slot is allowed instead of needing an
explicit removal of that slot first. It's a considerable improvement
in usability to that API, hence I'm sending it for -rc2.
- io-wq race fix and cleanup (Hao)
- loop_rw_iter() type fix
- SQPOLL max worker race fix
- Allow poll arm for O_NONBLOCK files, fixing a case where it's
impossible to properly use io_uring if you cannot modify the file
flags
- Allow direct open to simply reuse a slot, instead of needing it
explicitly removed first (Pavel)
- Fix a case where we missed signal mask restoring in cqring_wait, if
we hit -EFAULT (Xiaoguang)"
* tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: allow retry for O_NONBLOCK if async is supported
io_uring: auto-removal for direct open/accept
io_uring: fix missing sigmask restore in io_cqring_wait()
io_uring: pin SQPOLL data before unlocking ring lock
io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items
io-wq: fix potential race of acct->nr_workers
io-wq: code clean of io_wqe_create_worker()
io_uring: ensure symmetry in handling iter types in loop_rw_iter()
Linus Torvalds [Fri, 17 Sep 2021 16:16:59 +0000 (09:16 -0700)]
Merge tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix ANA state updates when a namespace is not present (Anton
Eidelman)
- nvmet: fix a width vs precision bug in
nvmet_subsys_attr_serial_show (Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu
Li)
- blk-integrity profile registration fixes (Christoph, Lihong)
- blk-cgroup UAF fix (Li)
- blk-mq tag iterator fix (Ming)
- blkcg memory leak fix (Yanfei)
* tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
blkcg: fix memory leak in blk_iolatency_init
nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
block: flush the integrity workqueue in blk_integrity_unregister
block: check if a profile is actually registered in blk_integrity_unregister
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
blk-mq: avoid to iterate over stale request
Linus Torvalds [Fri, 17 Sep 2021 15:59:27 +0000 (08:59 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes and cleanups from Catalin Marinas:
- Fix the memset() size when re-initialising the SVE state.
- Mark __stack_chk_guard as __ro_after_init.
- Remove duplicate include.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Mark __stack_chk_guard as __ro_after_init
arm64/kernel: remove duplicate include in process.c
arm64/sve: Use correct size when reinitialising SVE state
Linus Torvalds [Fri, 17 Sep 2021 15:31:49 +0000 (08:31 -0700)]
Merge tag 'for-linus-5.15b-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- The first hunk of a Xen swiotlb fixup series fixing multiple minor
issues and doing some small cleanups
- Some further Xen related fixes avoiding WARN() splats when running as
Xen guests or dom0
- A Kconfig fix allowing the pvcalls frontend to be built as a module
* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
swiotlb-xen: drop DEFAULT_NSLABS
swiotlb-xen: arrange to have buffer info logged
swiotlb-xen: drop leftover __ref
swiotlb-xen: limit init retries
swiotlb-xen: suppress certain init retries
swiotlb-xen: maintain slab count properly
swiotlb-xen: fix late init retry
swiotlb-xen: avoid double free
xen/pvcalls: backend can be a module
xen: fix usage of pmd_populate in mremap for pv guests
xen: reset legacy rtc flag for PV domU
PM: base: power: don't try to use non-existing RTC for storing data
xen/balloon: use a kernel thread instead a workqueue
Linus Torvalds [Thu, 16 Sep 2021 20:28:52 +0000 (13:28 -0700)]
Merge tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Slightly busier than usual rc2, but mostly scattered amdgpu fixes,
some i915 and etnaviv resolves an MMU/runtime PM blowup.
amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license
amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases
radeon:
- AGP fix
i915:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
etnaviv:
- MMU context vs runtime PM fix"
* tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits)
drm/amdgpu/display: add a proper license to dc_link_dp.c
drm/amd/display: Fix white screen page fault for gpuvm
amd/display: enable panel orientation quirks
drm/amdgpu: Demote TMZ unsupported log message from warning to info
drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
drm/radeon: pass drm dev radeon_agp_head_init directly
drm/amdgpu: move iommu_resume before ip init/resume
drm/amdgpu: add amdgpu_amdkfd_resume_iommu
drm/amdkfd: separate kfd_iommu_resume from kfd_resume
drm/amd/display: Link training retry fix for abort case
drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
drm/amd/display: Get backlight from PWM if DMCU is not initialized
drm/amdkfd: make needs_pcie_atomics FW-version dependent
drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
drm/amdgpu: update SMU PPSMC for cyan skilfish
drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
...
Linus Torvalds [Thu, 16 Sep 2021 20:05:42 +0000 (13:05 -0700)]
Merge tag 'net-5.15-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- vhost_net: fix OoB on sendmsg() failure
- mlx5: bridge, fix uninitialized variable usage
- bnxt_en: fix error recovery regression
Current release - new code bugs:
- bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()
Previous releases - regressions:
- r6040: restore MDIO clock frequency after MAC reset
- tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
- dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Previous releases - always broken:
- ptp: dp83640: don't define PAGE0, avoid compiler warning
- igc: fix tunnel segmentation offloads
- phylink: update SFP selected interface on advertising changes
- stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
- mlx5e: fix mutual exclusion between CQE compression and HW TS
Misc:
- bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode
- sfc: fallback for lack of xdp tx queues
- hns3: add option to turn off page pool feature"
* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
mlxbf_gige: clear valid_polarity upon open
igc: fix tunnel offloading
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
net: wan: wanxl: define CROSS_COMPILE_M68K
selftests: nci: replace unsigned int with int
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Revert "net: phy: Uniform PHY driver access"
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
ptp: dp83640: don't define PAGE0
bnx2x: Fix enabling network interfaces without VFs
Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
net-caif: avoid user-triggerable WARN_ON(1)
bpf, selftests: Add test case for mixed cgroup v1/v2
bpf, selftests: Add cgroup v1 net_cls classid helpers
bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
bpf: Add oversize check before call kvcalloc()
net: hns3: fix the timing issue of VF clearing interrupt sources
net: hns3: fix the exception when query imp info
net: hns3: disable mac in flr process
...
Dave Airlie [Thu, 16 Sep 2021 19:58:55 +0000 (05:58 +1000)]
Merge tag 'amd-drm-fixes-5.15-2021-09-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-09-16:
amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license
amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases
radeon:
- AGP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com
Dave Airlie [Thu, 16 Sep 2021 19:53:52 +0000 (05:53 +1000)]
Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc2:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com
Guenter Roeck [Thu, 9 Sep 2021 03:57:43 +0000 (20:57 -0700)]
net: 6pack: Fix tx timeout and slot time
tx timeout and slot time are currently specified in units of HZ. On
Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this
results in the following error message.
drivers/net/hamradio/6pack.c: In function 'sixpack_open':
drivers/net/hamradio/6pack.c:71:41: error:
unsigned conversion from 'int' to 'unsigned char'
changes value from '256' to '0'
In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:
https://www.linux-ax25.org/wiki/6PACK
Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.
Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:
mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Thu, 16 Sep 2021 19:30:56 +0000 (05:30 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
Fixes a very annoying issue where the driver view of the MMU state gets
out of sync with the actual hardware state across a runtime PM cycle,
so we end up restarting the GPU with the wrong (potentially already
freed) MMU context. Hilarity ensues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/729a561b6cfed090457bcc856a9e14ed6209fe21.camel@pengutronix.de
Arnd Bergmann [Tue, 28 Apr 2020 21:31:24 +0000 (23:31 +0200)]
drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused
With the new static annotation, the compiler warns when the functions
are actually unused:
drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
1123 | static int cdn_dp_resume(struct device *dev)
| ^~~~~~~~~~~~~
Mark them __maybe_unused to suppress that warning as well.
[ Not so 'new' static annotations any more, and I removed the part of
the patch that added __maybe_unused to cdn_dp_suspend(), because it's
used by the shutdown/remove code.
So only the resume function ends up possibly unused if CONFIG_PM isn't
set - Linus ]
Fixes:
7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 18:47:14 +0000 (11:47 -0700)]
cpufreq: vexpress: Drop unused variable
arm:allmodconfig fails to build with the following error.
drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
unused variable 'cur_cluster'
Remove the unused variable.
Fixes:
bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 05:00:33 +0000 (22:00 -0700)]
alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine. One exception is alpha. This
results in a number of compile errors such as
drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
drivers/atm/ambassador.c: In function 'do_loader_command':
drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 18:14:47 +0000 (11:14 -0700)]
3com 3c515: make it compile on 64-bit architectures
This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it. And I think the 'Jensen' actually
did have an ISA slot.
However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':
outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
which is all kinds of broken. Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits. I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".
Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).
Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 17:32:00 +0000 (10:32 -0700)]
Merge tag 'for-5.15/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Fix a build warning when using the PAGE0 pointer"
* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use absolute_pointer() to define PAGE0
Linus Torvalds [Thu, 16 Sep 2021 17:26:48 +0000 (10:26 -0700)]
Merge tag 'm68k-for-v5.15-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Warning fixes to mitigate CONFIG_WERROR=y
* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: mvme: Remove overdue #warnings in RTC handling
m68k: Double cast io functions to unsigned long
Dan Li [Tue, 14 Sep 2021 09:44:02 +0000 (17:44 +0800)]
arm64: Mark __stack_chk_guard as __ro_after_init
__stack_chk_guard is setup once while init stage and never changed
after that.
Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Lv Ruyi [Thu, 2 Sep 2021 01:11:26 +0000 (18:11 -0700)]
arm64/kernel: remove duplicate include in process.c
Remove all but the first include of linux/sched.h from process.c
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Brown [Thu, 9 Sep 2021 16:53:56 +0000 (17:53 +0100)]
arm64/sve: Use correct size when reinitialising SVE state
When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.
This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.
Fixes:
bc0ee4760364 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Alex Deucher [Tue, 14 Sep 2021 14:50:47 +0000 (10:50 -0400)]
drm/amdgpu/display: add a proper license to dc_link_dp.c
Was missing.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 13 Sep 2021 18:56:44 +0000 (14:56 -0400)]
drm/amd/display: Fix white screen page fault for gpuvm
[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.
Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.
[How]
Use memset to ensure all fields are initialized to 0 by default.
Fixes:
64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Simon Ser [Fri, 10 Sep 2021 15:37:41 +0000 (15:37 +0000)]
amd/display: enable panel orientation quirks
This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.
Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Menzel [Mon, 13 Sep 2021 08:34:11 +0000 (10:34 +0200)]
drm/amdgpu: Demote TMZ unsupported log message from warning to info
As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Thu, 9 Sep 2021 16:56:28 +0000 (18:56 +0200)]
drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.
Fixes compile failure building for ppc64le on RHEL 8:
In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
c84d46707ebb "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 9 Sep 2021 03:01:00 +0000 (11:01 +0800)]
drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
Current RUNPM mechanism relies on PMFW to master the timing for BACO
in/exit. And that needs cooperation from sound driver for dstate
change notification for function 1(audio). Otherwise(on sound driver
missing), BACO cannot be kicked in correctly and hang will be observed
on RUNPM exit.
By switching back to legacy message way on sound driver missing,
we are able to fix the runpm hang observed for the scenario below:
amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Nirmoy Das [Mon, 13 Sep 2021 08:08:23 +0000 (10:08 +0200)]
drm/radeon: pass drm dev radeon_agp_head_init directly
Pass drm dev directly as rdev->ddev gets initialized later on
at radeon_device_init().
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
James Zhu [Tue, 7 Sep 2021 15:32:22 +0000 (11:32 -0400)]
drm/amdgpu: move iommu_resume before ip init/resume
Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
James Zhu [Tue, 7 Sep 2021 15:27:31 +0000 (11:27 -0400)]
drm/amdgpu: add amdgpu_amdkfd_resume_iommu
Add amdgpu_amdkfd_resume_iommu for amdgpu.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
James Zhu [Tue, 7 Sep 2021 15:13:02 +0000 (11:13 -0400)]
drm/amdkfd: separate kfd_iommu_resume from kfd_resume
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.
v2: squash in fix for !CONFIG_HSA_AMD
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Meenakshikumar Somasundaram [Mon, 30 Aug 2021 18:01:10 +0000 (14:01 -0400)]
drm/amd/display: Link training retry fix for abort case
[Why]
If link training is aborted, it shall be retried if sink is present.
[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qingqing Zhuo [Fri, 27 Aug 2021 10:58:38 +0000 (06:58 -0400)]
drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.
[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Wed, 25 Aug 2021 20:27:47 +0000 (16:27 -0400)]
drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
[Why]
call stack of amdgpu dsc mst pbn, slot num calculation is as below:
-compute_bpp_x16_from_target_bandwidth
-decide_dsc_target_bpp_x16
-setup_dsc_config
-dc_dsc_compute_bandwidth_range
-compute_mst_dsc_configs_for_link
-compute_mst_dsc_configs_for_state
from pbn -> dsc target bpp_x16
bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth.
Beside pixel clock and bpp, num_slices_h and bpp_increment_div
will also affect bpp_x16.
from dsc target bpp_x16 -> pbn
within dm_update_mst_vcpi_slots_for_dsc,
pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true);
drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
8 * 54 * 1000 * 1000);
}
bpp / 16 trunc digits after decimal point. This will cause calculation
delta. drm_dp_calc_pbn_mode does not have other informations,
like num_slices_h, bpp_increment_div. therefore, it does not do revese
calcuation properly from bpp_x16 to pbn.
pbn from drm_dp_calc_pbn_mode is less than pbn from
compute_mst_dsc_configs_for_state. This cause not enough mst slot
allocated to display. display could not visually light up.
[How]
pass pbn from compute_mst_dsc_configs_for_state to
dm_update_mst_vcpi_slots_for_dsc
Cc: stable@vger.kernel.org
Reviewed-by: Scott Foster <Scott.Foster@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 16 Aug 2021 19:57:12 +0000 (15:57 -0400)]
drm/amd/display: Get backlight from PWM if DMCU is not initialized
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e.
directly via the PWM registers, if DMCU is not initialized. We
always read it back through ABM registers which leads to a
mismatch and forces atomic_commit to program the backlight
each time.
Instead make sure we use the same logic for backlight readback,
i.e. read it from panel_cntl if DMCU is not initialized.
We also need to remove some extraneous and incorrect calculations
at the end of dce_get_16_bit_backlight_from_pwm.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 31 Aug 2021 21:42:15 +0000 (17:42 -0400)]
drm/amdkfd: make needs_pcie_atomics FW-version dependent
On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.
Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Fri, 27 Aug 2021 07:20:51 +0000 (15:20 +0800)]
drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.
v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.
Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
"vc" - sclk voltage curve
"point" - must be 0
"sclk" - target value of sclk(MHz), should be in safe range
"vddc" - target value of vddc(mV), a 6.25(mV) stepping is
recommended and should be in safe range (the real
vddc is an approximation of target value)
echo c > pp_od_clk_voltage
"c" - commit the changes of sclk and vddc, only after
the commit command, the target values set by "vc"
command will take effect
echo r > pp_od_clk_voltage
"r" - reset sclk and vddc to default value, a subsequent
commit command is needed to take effect
Example:
1) Check default sclk and vddc
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 862mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
2) Set sclk to 1500MHz and vddc to 700mV
$ echo vc 0 1500 700 > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1500Mhz *
OD_VDDC:
0: 693mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
3) Reset sclk and vddc to default
$ echo r > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 874mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Fri, 27 Aug 2021 07:03:50 +0000 (15:03 +0800)]
drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
Add print_clk_levels and read_sensor pptable funcs for
cyan skilfish.
v2: keep consitency and add get_gpu_metrics callback.
v3: use sysfs_emit_at() in sysfs show function.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Fri, 27 Aug 2021 06:16:31 +0000 (14:16 +0800)]
drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
Add SmuMetrics_t definition for cyan skilfish.
v2: update SmuMetrics_t definition.
v3: cleanup and rearrange the order of fields.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Tue, 24 Aug 2021 09:02:57 +0000 (17:02 +0800)]
drm/amdgpu: update SMU PPSMC for cyan skilfish
Add some PPSMC MSGs for cyan skilfish.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Wed, 8 Sep 2021 05:34:26 +0000 (13:34 +0800)]
drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
sysfs_emit and sysfs_emit_at requrie a page boundary
aligned buf address. Make them happy!
v2: use an inline function.
Warning Log:
[ 492.545174] invalid sysfs_emit_at: buf:
00000000f19bdfde at:0
[ 492.546416] WARNING: CPU: 7 PID: 1304 at fs/sysfs/file.c:765 sysfs_emit_at+0x4a/0xa0
[ 492.654805] Call Trace:
[ 492.655353] ? smu_cmn_get_metrics_table+0x40/0x50 [amdgpu]
[ 492.656780] vangogh_print_clk_levels+0x369/0x410 [amdgpu]
[ 492.658245] vangogh_common_print_clk_levels+0x77/0x80 [amdgpu]
[ 492.659733] ? preempt_schedule_common+0x18/0x30
[ 492.660713] smu_print_ppclk_levels+0x65/0x90 [amdgpu]
[ 492.662107] amdgpu_get_pp_od_clk_voltage+0x13d/0x190 [amdgpu]
[ 492.663620] dev_attr_show+0x1d/0x40
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anson Jacob [Thu, 9 Sep 2021 16:48:29 +0000 (12:48 -0400)]
drm/amd/display: dc_assert_fp_enabled assert only if FPU is not enabled
Assert only when FPU is not enabled.
Fixes:
0ea7ee821701 ("drm/amd/display: Add DC_FP helper to check FPU state")
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 7 Sep 2021 13:53:03 +0000 (09:53 -0400)]
drm/amd/display: Add NULL checks for vblank workqueue
[Why]
If we're running a headless config with 0 links then the vblank
workqueue will be NULL - causing a NULL pointer exception during
any commit.
[How]
Guard access to the workqueue if it's NULL and don't queue or flush
work if it is.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700
Fixes:
58aa1c50e5a231 ("drm/amd/display: Use vblank control events for PSR enable/disable")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Thompson [Wed, 15 Sep 2021 18:08:48 +0000 (14:08 -0400)]
mlxbf_gige: clear valid_polarity upon open
The network interface managed by the mlxbf_gige driver can
get into a problem state where traffic does not flow.
In this state, the interface will be up and enabled, but
will stop processing received packets. This problem state
will happen if three specific conditions occur:
1) driver has received more than (N * RxRingSize) packets but
less than (N+1 * RxRingSize) packets, where N is an odd number
Note: the command "ethtool -g <interface>" will display the
current receive ring size, which currently defaults to 128
2) the driver's interface was disabled via "ifconfig oob_net0 down"
during the window described in #1.
3) the driver's interface is re-enabled via "ifconfig oob_net0 up"
This patch ensures that the driver's "valid_polarity" field is
cleared during the open() method so that it always matches the
receive polarity used by hardware. Without this fix, the driver
needs to be unloaded and reloaded to correct this problem state.
Fixes:
f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 15 Sep 2021 17:19:07 +0000 (10:19 -0700)]
igc: fix tunnel offloading
Checking tunnel offloading, it turns out that offloading doesn't work
as expected. The following script allows to reproduce the issue.
Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK'
=== SNIP ===
if [ $# -ne 4 ]
then
echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK"
exit 1
fi
DEVICE="$1"
LOCAL_ADDRESS="$2"
REMOTE_ADDRESS="$3"
NWMASK="$4"
echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') "
ethtool -k "${DEVICE}" | grep tx-udp
echo
echo "Set up NIC and tunnel..."
ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}"
ip link set "${DEVICE}" up
sleep 2
ip link add vxlan1 type vxlan id 42 \
remote "${REMOTE_ADDRESS}" \
local "${LOCAL_ADDRESS}" \
dstport 0 \
dev "${DEVICE}"
ip addr add fc00::1/64 dev vxlan1
ip link set vxlan1 up
sleep 2
rm -f vxlan.pcap
echo "Running tcpdump and iperf3..."
( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) &
sleep 2
iperf3 -c fc00::2 >/dev/null
pkill tcpdump
echo
echo -n "Max. Paket Size: "
tcpdump -r vxlan.pcap -nnle 2>/dev/null \
| grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \
| awk '{print $8}' | awk -F ':' '{print $1}' \
| sort -n | tail -1
echo
ip link del vxlan1
ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}"
=== SNAP ===
The expected outcome is
Max. Paket Size: 64904
This is what you see on igb, the code igc has been taken from.
However, on igc the output is
Max. Paket Size: 1516
so the GSO aggregate packets are segmented by the kernel before calling
igc_xmit_frame. Inside the subsequent call to igc_tso, the check for
skb_is_gso(skb) fails and the function returns prematurely.
It turns out that this occurs because the feature flags aren't set
entirely correctly in igc_probe. In contrast to the original code
from igb_probe, igc_probe neglects to set the flags required to allow
tunnel offloading.
Setting the same flags as igb fixes the issue on igc.
Fixes:
34428dff3679 ("igc: Add GSO partial support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Wed, 15 Sep 2021 04:47:27 +0000 (07:47 +0300)]
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
Remove the assert from the callback priv lookup function since it does
not require RTNL lock and is already protected by flow_indr_block_lock.
This will avoid warnings from being emitted to dmesg if the driver
registers its callback after an ingress qdisc was created for a
netdevice.
The warnings started after the following patch was merged:
commit
74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Borowski [Sun, 12 Sep 2021 21:23:21 +0000 (23:23 +0200)]
net: wan: wanxl: define CROSS_COMPILE_M68K
It was used but never set. The hardcoded value from before the dawn of
time was non-standard; the usual name for cross-tools is $TRIPLET-$TOOL
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiang wangx [Thu, 16 Sep 2021 12:24:42 +0000 (20:24 +0800)]
selftests: nci: replace unsigned int with int
Should not use comparison of unsigned expressions < 0.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Stach [Fri, 20 Aug 2021 20:18:30 +0000 (22:18 +0200)]
drm/etnaviv: add missing MMU context put when reaping MMU mapping
When we forcefully evict a mapping from the the address space and thus the
MMU context, the MMU context is leaked, as the mapping no longer points to
it, so it doesn't get freed when the GEM object is destroyed. Add the
mssing context put to fix the leak.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:29 +0000 (22:18 +0200)]
drm/etnaviv: reference MMU context when setting up hardware state
Move the refcount manipulation of the MMU context to the point where the
hardware state is programmed. At that point it is also known if a previous
MMU state is still there, or the state needs to be reprogrammed with a
potentially different context.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:28 +0000 (22:18 +0200)]
drm/etnaviv: fix MMU context leak on GPU reset
After a reset the GPU is no longer using the MMU context and may be
restarted with a different context. While the mmu_state proeprly was
cleared, the context wasn't unreferenced, leading to a memory leak.
Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:27 +0000 (22:18 +0200)]
drm/etnaviv: exec and MMU state is lost when resetting the GPU
When the GPU is reset both the current exec state, as well as all MMU
state is lost. Move the driver side state tracking into the reset function
to keep hardware and software state from diverging.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:26 +0000 (22:18 +0200)]
drm/etnaviv: keep MMU context across runtime suspend/resume
The MMU state may be kept across a runtime suspend/resume cycle, as we
avoid a full hardware reset to keep the latency of the runtime PM small.
Don't pretend that the MMU state is lost in driver state. The MMU
context is pushed out when new HW jobs with a different context are
coming in. The only exception to this is when the GPU is unbound, in
which case we need to make sure to also free the last active context.
Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:25 +0000 (22:18 +0200)]
drm/etnaviv: stop abusing mmu_context as FE running marker
While the DMA frontend can only be active when the MMU context is set, the
reverse isn't necessarily true, as the frontend can be stopped while the
MMU state is kept. Stop treating mmu_context being set as a indication that
the frontend is running and instead add a explicit property.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:24 +0000 (22:18 +0200)]
drm/etnaviv: put submit prev MMU context when it exists
The prev context is the MMU context at the time of the job
queueing in hardware. As a job might be queued multiple times
due to recovery after a GPU hang, we need to make sure to put
the stale prev MMU context from a prior queuing, to avoid the
reference and thus the MMU context leaking.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 20 Aug 2021 20:18:23 +0000 (22:18 +0200)]
drm/etnaviv: return context from etnaviv_iommu_context_get
Being able to have the refcount manipulation in an assignment makes
it much easier to parse the code.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Helge Deller [Thu, 16 Sep 2021 06:35:42 +0000 (08:35 +0200)]
parisc: Use absolute_pointer() to define PAGE0
Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:
arch/parisc/kernel/setup.c: In function 'start_parisc':
error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0
Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 00:18:56 +0000 (17:18 -0700)]
Merge tag 'hyperv-fixes-signed-
20210915' of git://git./linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix kernel crash caused by uio driver (Vitaly Kuznetsov)
- Remove on-stack cpumask from HV APIC code (Wei Liu)
* tag 'hyperv-fixes-signed-
20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself
asm-generic/hyperv: provide cpumask_to_vpset_noself
Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver
Linus Torvalds [Thu, 16 Sep 2021 00:06:01 +0000 (17:06 -0700)]
Merge tag 'rtc-5.15-fixes' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fix from Alexandre Belloni:
"Fix a locking issue in the cmos rtc driver"
* tag 'rtc-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: Disable irq around direct invocation of cmos_interrupt()
Vladimir Oltean [Tue, 14 Sep 2021 13:47:26 +0000 (16:47 +0300)]
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error
messages appear:
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2
(and similarly for other ports)
What happens is that DSA has a policy "even if there are bugs, let's at
least not leak memory" and dsa_port_teardown() clears the dp->fdbs and
dp->mdbs lists, which are supposed to be empty.
But deleting that cleanup code, the warnings go away.
=> the FDB and MDB lists (used for refcounting on shared ports, aka CPU
and DSA ports) will eventually be empty, but are not empty by the time
we tear down those ports. Aka we are deleting them too soon.
The addresses that DSA complains about are host-trapped addresses: the
local addresses of the ports, and the MAC address of the bridge device.
The problem is that offloading those entries happens from a deferred
work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this
races with the teardown of the CPU and DSA ports where the refcounting
is kept.
In fact, not only it races, but fundamentally speaking, if we iterate
through the port list linearly, we might end up tearing down the shared
ports even before we delete a DSA user port which has a bridge upper.
So as it turns out, we need to first tear down the user ports (and the
unused ones, for no better place of doing that), then the shared ports
(the CPU and DSA ports). In between, we need to ensure that all work
items scheduled by our switchdev handlers (which only run for user
ports, hence the reason why we tear them down first) have finished.
Fixes:
161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 14:05:15 +0000 (17:05 +0300)]
Revert "net: phy: Uniform PHY driver access"
This reverts commit
3ac8eed62596387214869319379c1fcba264d8c6, which did
more than it said on the box, and not only it replaced to_phy_driver
with phydev->drv, but it also removed the "!drv" check, without actually
explaining why that is fine.
That patch in fact breaks suspend/resume on any system which has PHY
devices with no drivers bound.
The stack trace is:
Unable to handle kernel NULL pointer dereference at virtual address
00000000000000e8
pc : mdio_bus_phy_suspend+0xd8/0xec
lr : dpm_run_callback+0x38/0x90
Call trace:
mdio_bus_phy_suspend+0xd8/0xec
dpm_run_callback+0x38/0x90
__device_suspend+0x108/0x3cc
dpm_suspend+0x140/0x210
dpm_suspend_start+0x7c/0xa0
suspend_devices_and_enter+0x13c/0x540
pm_suspend+0x2a4/0x330
Examples why that assumption is not fine:
- There is an MDIO bus with a PHY device that doesn't have a specific
PHY driver loaded, because mdiobus_register() automatically creates a
PHY device for it but there is no specific PHY driver in the system.
Normally under those circumstances, the generic PHY driver will be
bound lazily to it (at phy_attach_direct time). But some Ethernet
drivers attach to their PHY at .ndo_open time. Until then it, the
to-be-driven-by-genphy PHY device will not have a driver. The blamed
patch amounts to saying "you need to open all net devices before the
system can suspend, to avoid the NULL pointer dereference".
- There is any raw MDIO device which has 'plausible' values in the PHY
ID registers 2 and 3, which is located on an MDIO bus whose driver
does not set bus->phy_mask = ~0 (which prevents auto-scanning of PHY
devices). An example could be a MAC's internal MDIO bus with PCS
devices on it, for serial links such as SGMII. PHY devices will get
created for those PCSes too, due to that MDIO bus auto-scanning, and
although those PHY devices are not used, they do not bother anybody
either. PCS devices are usually managed in Linux as raw MDIO devices.
Nonetheless, they do not have a PHY driver, nor does anybody attempt
to connect to them (because they are not a PHY), and therefore this
patch breaks that.
The goal itself of the patch is questionable, so I am going for a
straight revert. to_phy_driver does not seem to have a need to be
replaced by phydev->drv, in fact that might even trigger code paths
which were not given too deep of a thought.
For instance:
phy_probe populates phydev->drv at the beginning, but does not clean it
up on any error (including EPROBE_DEFER). So if the phydev driver
requests probe deferral, phydev->drv will remain populated despite there
being no driver bound.
If a system suspend starts in between the initial probe deferral request
and the subsequent probe retry, we will be calling the phydev->drv->suspend
method, but _before_ any phydev->drv->probe call has succeeded.
That is to say, if the phydev->drv is allocating any driver-private data
structure in ->probe, it pretty much expects that data structure to be
available in ->suspend. But it may not. That is a pretty insane
environment to present to PHY drivers.
In the code structure before the blamed patch, mdio_bus_phy_may_suspend
would just say "no, don't suspend" to any PHY device which does not have
a driver pointer _in_the_device_structure_ (not the phydev->drv). That
would essentially ensure that ->suspend will never get called for a
device that has not yet successfully completed probe. This is the code
structure the patch is returning to, via the revert.
Fixes:
3ac8eed62596 ("net: phy: Uniform PHY driver access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914140515.2311548-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 13:43:31 +0000 (16:43 +0300)]
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
DSA supports connecting to a phy-handle, and has a fallback to a non-OF
based method of connecting to an internal PHY on the switch's own MDIO
bus, if no phy-handle and no fixed-link nodes were present.
The -ENODEV error code from the first attempt (phylink_of_phy_connect)
is what triggers the second attempt (phylink_connect_phy).
However, when the first attempt returns a different error code than
-ENODEV, this results in an unbalance of calls to phylink_create and
phylink_destroy by the time we exit the function. The phylink instance
has leaked.
There are many other error codes that can be returned by
phylink_of_phy_connect. For example, phylink_validate returns -EINVAL.
So this is a practical issue too.
Fixes:
aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 15 Sep 2021 20:56:37 +0000 (13:56 -0700)]
qnx4: avoid stringop-overread errors
The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.
In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.
But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.
That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:
fs/qnx4/dir.c: In function ‘qnx4_readdir’:
fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
51 | size = strnlen(de->di_fname, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from fs/qnx4/qnx4.h:3,
from fs/qnx4/dir.c:16:
include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
45 | char di_fname[QNX4_SHORT_NAME_MAX];
| ^~~~~~~~
which is because the source code doesn't really make this whole "one of
two different types" explicit.
Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 6 Sep 2021 23:06:04 +0000 (16:06 -0700)]
sparc: avoid stringop-overread errors
The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.
As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work. This
results in various errors like:
arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.
This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).
Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 15 Sep 2021 19:11:48 +0000 (12:11 -0700)]
Merge branch 'absolute-pointer' (patches from Guenter)
Merge absolute_pointer macro series from Guenter Roeck:
"Kernel test builds currently fail for several architectures with error
messages such as the following.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0
[-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses if gcc's builtin functions are used for
those operations.
This series introduces absolute_pointer() to fix the problem.
absolute_pointer() disassociates a pointer from its originating symbol
type and context, and thus prevents gcc from making assumptions about
pointers passed to memory operations"
* emailed patches from Guenter Roeck <linux@roeck-us.net>:
alpha: Use absolute_pointer to define COMMAND_LINE
alpha: Move setup.h out of uapi
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
compiler.h: Introduce absolute_pointer macro
Guenter Roeck [Wed, 15 Sep 2021 03:52:27 +0000 (20:52 -0700)]
alpha: Use absolute_pointer to define COMMAND_LINE
alpha:allmodconfig fails to build with the following error
when using gcc 11.x.
arch/alpha/kernel/setup.c: In function 'setup_arch':
arch/alpha/kernel/setup.c:493:13: error:
'strcmp' reading 1 or more bytes from a region of size 0
Avoid the problem by declaring COMMAND_LINE as absolute_pointer().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:26 +0000 (20:52 -0700)]
alpha: Move setup.h out of uapi
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:25 +0000 (20:52 -0700)]
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
gcc 11.x reports the following compiler warning/error.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Use absolute_pointer() to work around the problem.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:24 +0000 (20:52 -0700)]
compiler.h: Introduce absolute_pointer macro
absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Jinlin [Tue, 14 Sep 2021 04:26:05 +0000 (12:26 +0800)]
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
KASAN reports a use-after-free report when doing fuzz test:
[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr
ffff888be0a35664 by task sh/
1453338
[693354.105607] CPU: 41 PID:
1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621] dump_stack+0xf1/0x19b
[693354.105626] ? show_regs_print_info+0x5/0x5
[693354.105634] ? printk+0x9c/0xc3
[693354.105638] ? cpumask_weight+0x1f/0x1f
[693354.105648] print_address_description+0x70/0x360
[693354.105654] kasan_report+0x1b2/0x330
[693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670] bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675] ? bfq_cpd_init+0x20/0x20
[693354.105683] cgroup_file_write+0x3aa/0x510
[693354.105693] ? ___slab_alloc+0x507/0x540
[693354.105698] ? cgroup_file_poll+0x60/0x60
[693354.105702] ? 0xffffffff89600000
[693354.105708] ? usercopy_abort+0x90/0x90
[693354.105716] ? mutex_lock+0xef/0x180
[693354.105726] kernfs_fop_write+0x1ab/0x280
[693354.105732] ? cgroup_file_poll+0x60/0x60
[693354.105738] vfs_write+0xe7/0x230
[693354.105744] ksys_write+0xb0/0x140
[693354.105749] ? __ia32_sys_read+0x50/0x50
[693354.105760] do_syscall_64+0x112/0x370
[693354.105766] ? syscall_return_slowpath+0x260/0x260
[693354.105772] ? do_page_fault+0x9b/0x270
[693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784] ? enter_from_user_mode+0x30/0x30
[693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.105875] Allocated by task
1453337:
[693354.106001] kasan_kmalloc+0xa0/0xd0
[693354.106006] kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010] bfq_pd_alloc+0x96/0x120
[693354.106015] blkcg_activate_policy+0x1b7/0x2b0
[693354.106020] bfq_create_group_hierarchy+0x1e/0x80
[693354.106026] bfq_init_queue+0x678/0x8c0
[693354.106031] blk_mq_init_sched+0x1f8/0x460
[693354.106037] elevator_switch_mq+0xe1/0x240
[693354.106041] elevator_switch+0x25/0x40
[693354.106045] elv_iosched_store+0x1a1/0x230
[693354.106049] queue_attr_store+0x78/0xb0
[693354.106053] kernfs_fop_write+0x1ab/0x280
[693354.106056] vfs_write+0xe7/0x230
[693354.106060] ksys_write+0xb0/0x140
[693354.106064] do_syscall_64+0x112/0x370
[693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106114] Freed by task
1453336:
[693354.106225] __kasan_slab_free+0x130/0x180
[693354.106229] kfree+0x90/0x1b0
[693354.106233] blkcg_deactivate_policy+0x12c/0x220
[693354.106238] bfq_exit_queue+0xf5/0x110
[693354.106241] blk_mq_exit_sched+0x104/0x130
[693354.106245] __elevator_exit+0x45/0x60
[693354.106249] elevator_switch_mq+0xd6/0x240
[693354.106253] elevator_switch+0x25/0x40
[693354.106257] elv_iosched_store+0x1a1/0x230
[693354.106261] queue_attr_store+0x78/0xb0
[693354.106264] kernfs_fop_write+0x1ab/0x280
[693354.106268] vfs_write+0xe7/0x230
[693354.106271] ksys_write+0xb0/0x140
[693354.106275] do_syscall_64+0x112/0x370
[693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106329] The buggy address belongs to the object at
ffff888be0a35580
which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
1024-byte region [
ffff888be0a35580,
ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:
ffffea002f828c00 count:1 mapcount:0 mapping:
ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw:
0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw:
0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected
[693354.108511] Memory state around the buggy address:
[693354.108671]
ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396]
ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >
ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421] ^
[693354.140284]
ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912]
ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================
blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.
CPU0 CPU1
blkcg_deactivate_policy
spin_lock_irq(&q->queue_lock)
bfq_io_set_weight_legacy
spin_lock_irq(&blkcg->lock)
blkg_to_bfqg(blkg)
pd_to_bfqg(blkg->pd[pol->plid])
^^^^^^blkg->pd[pol->plid] != NULL
bfqg != NULL
pol->pd_free_fn(blkg->pd[pol->plid])
pd_to_bfqg(blkg->pd[pol->plid])
bfqg_put(bfqg)
kfree(bfqg)
blkg->pd[pol->plid] = NULL
spin_unlock_irq(q->queue_lock);
bfq_group_set_weight(bfqg, val, 0)
bfqg->entity.new_weight
^^^^^^trigger uaf here
spin_unlock_irq(&blkcg->lock);
Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yanfei Xu [Wed, 15 Sep 2021 07:24:26 +0000 (15:24 +0800)]
blkcg: fix memory leak in blk_iolatency_init
BUG: memory leak
unreferenced object 0xffff888129acdb80 (size 96):
comm "syz-executor.1", pid 12661, jiffies
4294962682 (age 15.220s)
hex dump (first 32 bytes):
20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff G...... ..)....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff82264ec8>] kmalloc include/linux/slab.h:591 [inline]
[<
ffffffff82264ec8>] kzalloc include/linux/slab.h:721 [inline]
[<
ffffffff82264ec8>] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724
[<
ffffffff8225b8c4>] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185
[<
ffffffff822253da>] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566
[<
ffffffff8223b175>] blk_mq_init_queue_data block/blk-mq.c:3100 [inline]
[<
ffffffff8223b175>] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124
[<
ffffffff826a9303>] loop_add+0x1c3/0x360 drivers/block/loop.c:2344
[<
ffffffff826a966e>] loop_control_get_free drivers/block/loop.c:2501 [inline]
[<
ffffffff826a966e>] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516
[<
ffffffff81597eec>] vfs_ioctl fs/ioctl.c:51 [inline]
[<
ffffffff81597eec>] __do_sys_ioctl fs/ioctl.c:874 [inline]
[<
ffffffff81597eec>] __se_sys_ioctl fs/ioctl.c:860 [inline]
[<
ffffffff81597eec>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
[<
ffffffff843fa745>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<
ffffffff843fa745>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<
ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will
not be invoked for cleanup. That leads a memory leak. Swap the
blk_throtl_init() and blk_iolatency_init() calls can solve this.
Reported-by: syzbot+01321b15cc98e6bf96d6@syzkaller.appspotmail.com
Fixes:
19688d7f9592 (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls)
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210915072426.4022924-1-yanfei.xu@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Masami Hiramatsu [Wed, 15 Sep 2021 00:53:38 +0000 (09:53 +0900)]
tools/bootconfig: Define memblock_free_ptr() to fix build error
The lib/bootconfig.c file is shared with the 'bootconfig' tooling, and
as a result, the changes incommit
77e02cf57b6c ("memblock: introduce
saner 'memblock_free_ptr()' interface") need to also be reflected in the
tooling header file.
So define the new memblock_free_ptr() wrapper, and remove unused __pa()
and memblock_free().
Fixes:
77e02cf57b6c ("memblock: introduce saner 'memblock_free_ptr()' interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Begunkov [Wed, 15 Sep 2021 10:00:05 +0000 (11:00 +0100)]
io_uring: move iopoll reissue into regular IO path
230d50d448acb ("io_uring: move reissue into regular IO path")
made non-IOPOLL I/O to not retry from ki_complete handler. Follow it
steps and do the same for IOPOLL. Same problems, same implementation,
same -EAGAIN assumptions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f80dfee2d5fa7678f0052a8ab3cfca9496a112ca.1631699928.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 10 Sep 2021 17:19:58 +0000 (11:19 -0600)]
Revert "iov_iter: track truncated size"
This reverts commit
2112ff5ce0c1128fe7b4d19cfe7f2b8ce5b595fa.
We no longer need to track the truncation count, the one user that did
need it has been converted to using iov_iter_restore() instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 10 Sep 2021 17:19:14 +0000 (11:19 -0600)]
io_uring: use iov_iter state save/restore helpers
Get rid of the need to do re-expand and revert on an iterator when we
encounter a short IO, or failure that warrants a retry. Use the new
state save/restore helpers instead.
We keep the iov_iter_state persistent across retries, if we need to
restart the read or write operation. If there's a pending retry, the
operation will always exit with the state correctly saved.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 15 Sep 2021 13:53:32 +0000 (07:53 -0600)]
Merge tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme into block-5.15
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.15
- fix ANA state updates when a namespace is not present (Anton Eidelman)
- nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show
(Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu Li)"
* tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme:
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
Jan Beulich [Tue, 7 Sep 2021 12:07:47 +0000 (14:07 +0200)]
swiotlb-xen: drop DEFAULT_NSLABS
It was introduced by
4035b43da6da ("xen-swiotlb: remove xen_set_nslabs")
and then not removed by
2d29960af0be ("swiotlb: dynamically allocate
io_tlb_default_mem").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/15259326-209a-1d11-338c-5018dc38abe8@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:07:21 +0000 (14:07 +0200)]
swiotlb-xen: arrange to have buffer info logged
I consider it unhelpful that address and size of the buffer aren't put
in the log file; it makes diagnosing issues needlessly harder. The
majority of callers of swiotlb_init() also passes 1 for the "verbose"
parameter.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/2e3c8e68-36b2-4ae9-b829-bf7f75d39d47@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:06:55 +0000 (14:06 +0200)]
swiotlb-xen: drop leftover __ref
Commit
a98f565462f0 ("xen-swiotlb: split xen_swiotlb_init") should not
only have added __init to the split off function, but also should have
dropped __ref from the one left.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/7cd163e1-fe13-270b-384c-2708e8273d34@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:06:37 +0000 (14:06 +0200)]
swiotlb-xen: limit init retries
Due to the use of max(1024, ...) there's no point retrying (and issuing
bogus log messages) when the number of slabs is already no larger than
this minimum value.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/984fa426-2b7b-4b77-5ce8-766619575b7f@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:05:54 +0000 (14:05 +0200)]
swiotlb-xen: suppress certain init retries
Only on the 2nd of the paths leading to xen_swiotlb_init()'s "error"
label it is useful to retry the allocation; the first one did already
iterate through all possible order values.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/56477481-87da-4962-9661-5e1b277efde0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:05:12 +0000 (14:05 +0200)]
swiotlb-xen: maintain slab count properly
Generic swiotlb code makes sure to keep the slab count a multiple of the
number of slabs per segment. Yet even without checking whether any such
assumption is made elsewhere, it is easy to see that xen_swiotlb_fixup()
might alter unrelated memory when calling xen_create_contiguous_region()
for the last segment, when that's not a full one - the function acts on
full order-N regions, not individual pages.
Align the slab count suitably when halving it for a retry. Add a build
time check and a runtime one. Replace the no longer useful local
variable "slabs" by an "order" one calculated just once, outside of the
loop. Re-use "order" for calculating "dma_bits", and change the type of
the latter as well as the one of "i" while touching this anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dc054cb0-bec4-4db0-fc06-c9fc957b6e66@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:04:47 +0000 (14:04 +0200)]
swiotlb-xen: fix late init retry
The commit referenced below removed the assignment of "bytes" from
xen_swiotlb_init() without - like done for xen_swiotlb_init_early() -
adding an assignment on the retry path, thus leading to excessively
sized allocations upon retries.
Fixes:
2d29960af0be ("swiotlb: dynamically allocate io_tlb_default_mem")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/778299d6-9cfd-1c13-026e-25ee5d14ecb3@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:04:25 +0000 (14:04 +0200)]
swiotlb-xen: avoid double free
Of the two paths leading to the "error" label in xen_swiotlb_init() one
didn't allocate anything, while the other did already free what was
allocated.
Fixes:
b82776005369 ("xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/ce9c2adb-8a52-6293-982a-0d6ece943ac6@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Tue, 7 Sep 2021 12:17:13 +0000 (14:17 +0200)]
xen/pvcalls: backend can be a module
It's not clear to me why only the frontend has been tristate. Switch the
backend to be, too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/54a6070c-92bb-36a3-2fc0-de9ccca438c5@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Juergen Gross [Wed, 8 Sep 2021 07:36:40 +0000 (09:36 +0200)]
xen: fix usage of pmd_populate in mremap for pv guests
Commit
0881ace292b662 ("mm/mremap: use pmd/pud_poplulate to update page
table entries") introduced a regression when running as Xen PV guest.
Today pmd_populate() for Xen PV assumes that the PFN inserted is
referencing a not yet used page table. In case of move_normal_pmd()
this is not true, resulting in WARN splats like:
[34321.304270] ------------[ cut here ]------------
[34321.304277] WARNING: CPU: 0 PID: 23628 at arch/x86/xen/multicalls.c:102 xen_mc_flush+0x176/0x1a0
[34321.304288] Modules linked in:
[34321.304291] CPU: 0 PID: 23628 Comm: apt-get Not tainted 5.14.1-
20210906-doflr-mac80211debug+ #1
[34321.304294] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[34321.304296] RIP: e030:xen_mc_flush+0x176/0x1a0
[34321.304300] Code: 89 45 18 48 c1 e9 3f 48 89 ce e9 20 ff ff ff e8 60 03 00 00 66 90 5b 5d 41 5c 41 5d c3 48 c7 45 18 ea ff ff ff be 01 00 00 00 <0f> 0b 8b 55 00 48 c7 c7 10 97 aa 82 31 db 49 c7 c5 38 97 aa 82 65
[34321.304303] RSP: e02b:
ffffc90000a97c90 EFLAGS:
00010002
[34321.304305] RAX:
ffff88807d416398 RBX:
ffff88807d416350 RCX:
ffff88807d416398
[34321.304306] RDX:
0000000000000001 RSI:
0000000000000001 RDI:
deadbeefdeadf00d
[34321.304308] RBP:
ffff88807d416300 R08:
aaaaaaaaaaaaaaaa R09:
ffff888006160cc0
[34321.304309] R10:
deadbeefdeadf00d R11:
ffffea000026a600 R12:
0000000000000000
[34321.304310] R13:
ffff888012f6b000 R14:
0000000012f6b000 R15:
0000000000000001
[34321.304320] FS:
00007f5071177800(0000) GS:
ffff88807d400000(0000) knlGS:
0000000000000000
[34321.304322] CS:
10000e030 DS: 0000 ES: 0000 CR0:
0000000080050033
[34321.304323] CR2:
00007f506f542000 CR3:
00000000160cc000 CR4:
0000000000000660
[34321.304326] Call Trace:
[34321.304331] xen_alloc_pte+0x294/0x320
[34321.304334] move_pgt_entry+0x165/0x4b0
[34321.304339] move_page_tables+0x6fa/0x8d0
[34321.304342] move_vma.isra.44+0x138/0x500
[34321.304345] __x64_sys_mremap+0x296/0x410
[34321.304348] do_syscall_64+0x3a/0x80
[34321.304352] entry_SYSCALL_64_after_hwframe+0x44/0xae
[34321.304355] RIP: 0033:0x7f507196301a
[34321.304358] Code: 73 01 c3 48 8b 0d 76 0e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 19 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 46 0e 0c 00 f7 d8 64 89 01 48
[34321.304360] RSP: 002b:
00007ffda1eecd38 EFLAGS:
00000246 ORIG_RAX:
0000000000000019
[34321.304362] RAX:
ffffffffffffffda RBX:
000056205f950f30 RCX:
00007f507196301a
[34321.304363] RDX:
0000000001a00000 RSI:
0000000001900000 RDI:
00007f506dc56000
[34321.304364] RBP:
0000000001a00000 R08:
0000000000000010 R09:
0000000000000004
[34321.304365] R10:
0000000000000001 R11:
0000000000000246 R12:
00007f506dc56060
[34321.304367] R13:
00007f506dc56000 R14:
00007f506dc56060 R15:
000056205f950f30
[34321.304368] ---[ end trace
a19885b78fe8f33e ]---
[34321.304370] 1 of 2 multicall(s) failed: cpu 0
[34321.304371] call 2: op=
12297829382473034410 arg=[
aaaaaaaaaaaaaaaa] result=-22
Fix that by modifying xen_alloc_ptpage() to only pin the page table in
case it wasn't pinned already.
Fixes:
0881ace292b662 ("mm/mremap: use pmd/pud_poplulate to update page table entries")
Cc: <stable@vger.kernel.org>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210908073640.11299-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Juergen Gross [Fri, 3 Sep 2021 08:49:37 +0000 (10:49 +0200)]
xen: reset legacy rtc flag for PV domU
A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:
[ 1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[ 1.333404] Modules linked in:
[ 1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-default+ #282
[ 1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[ 1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[ 1.333404] RSP: e02b:
ffffc90040093df8 EFLAGS:
00010002
[ 1.333404] RAX:
00000000000000ff RBX:
ffffc90040093e34 RCX:
0000000000000000
[ 1.333404] RDX:
0000000000000001 RSI:
0000000000000000 RDI:
000000000000000d
[ 1.333404] RBP:
ffffffff82ef0e30 R08:
ffff888005013e60 R09:
0000000000000000
[ 1.333404] R10:
ffffffff82373e9b R11:
0000000000033080 R12:
0000000000000200
[ 1.333404] R13:
0000000000000000 R14:
0000000000000002 R15:
ffffffff82cdc6d4
[ 1.333404] FS:
0000000000000000(0000) GS:
ffff88807d440000(0000) knlGS:
0000000000000000
[ 1.333404] CS:
10000e030 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1.333404] CR2:
0000000000000000 CR3:
000000000260a000 CR4:
0000000000050660
[ 1.333404] Call Trace:
[ 1.333404] ? wakeup_sources_sysfs_init+0x30/0x30
[ 1.333404] ? rdinit_setup+0x2b/0x2b
[ 1.333404] early_resume_init+0x23/0xa4
[ 1.333404] ? cn_proc_init+0x36/0x36
[ 1.333404] do_one_initcall+0x3e/0x200
[ 1.333404] kernel_init_freeable+0x232/0x28e
[ 1.333404] ? rest_init+0xd0/0xd0
[ 1.333404] kernel_init+0x16/0x120
[ 1.333404] ret_from_fork+0x1f/0x30
Cc: <stable@vger.kernel.org>
Fixes:
8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Randy Dunlap [Mon, 13 Sep 2021 22:06:05 +0000 (15:06 -0700)]
ptp: dp83640: don't define PAGE0
Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.
In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
8 | #define PAGE0 0x0000
from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
187 | #define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
Fixes:
cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adrian Bunk [Sun, 12 Sep 2021 19:05:23 +0000 (22:05 +0300)]
bnx2x: Fix enabling network interfaces without VFs
This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.
Fixes:
65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christoph Hellwig [Tue, 14 Sep 2021 07:06:57 +0000 (09:06 +0200)]
nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
There is no need to explicitly unregister the integrity profile when
deleting the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lihong Kou [Tue, 14 Sep 2021 07:06:56 +0000 (09:06 +0200)]
block: flush the integrity workqueue in blk_integrity_unregister
When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:
CPU0 CPU1
process_one_work nvme_validate_ns
bio_integrity_verify_fn nvme_update_ns_info
nvme_update_disk_info
blk_integrity_unregister
---set queue->integrity as 0
bio_integrity_process
--access bi->profile->verify_fn(bi is a pointer of queue->integity)
Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.
Signed-off-by: Lihong Kou <koulihong@huawei.com>
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 14 Sep 2021 07:06:55 +0000 (09:06 +0200)]
block: check if a profile is actually registered in blk_integrity_unregister
While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.
Reported-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Huang Rui [Tue, 7 Sep 2021 10:03:02 +0000 (18:03 +0800)]
drm/ttm: fix type mismatch error on sparc64
On sparc64, __fls() returns an "int", but the drm TTM code expected it
to be "unsigned long" as on x86. As a result, on sparc (and arc, and
m68k) you get build errors because 'min()' checks that the types match.
As suggested by Linus, it can use min_t instead of min to force the type
to be "unsigned int".
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 14 Sep 2021 20:23:22 +0000 (13:23 -0700)]
memblock: introduce saner 'memblock_free_ptr()' interface
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/
20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/
61ab2d0c-3313-aaab-514c-
e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes:
40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nirmoy Das [Thu, 2 Sep 2021 11:27:56 +0000 (13:27 +0200)]
drm/amdgpu: use IS_ERR for debugfs APIs
debugfs APIs returns encoded error so use
IS_ERR for checking return value.
v2: return PTR_ERR(ent)
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Simon Ser [Tue, 7 Sep 2021 14:19:34 +0000 (14:19 +0000)]
amd/display: downgrade validation failure log level
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.
Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.
This fixes error messages in the kernel when running gamescope [1].
[1]: https://github.com/Plagman/gamescope/issues/245
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 7 Sep 2021 07:37:52 +0000 (09:37 +0200)]
drm/amdgpu: fix use after free during BO move
The memory backing old_mem is already freed at that point, move the
check a bit more up.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes:
bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1699
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Kenneth Feng [Sun, 5 Sep 2021 23:55:01 +0000 (07:55 +0800)]
drm/amd/pm: fix the issue of uploading powerplay table
fix the issue of uploading powerplay table due to the dependancy of rlc.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Ernst Sjöstrand [Thu, 2 Sep 2021 07:50:27 +0000 (09:50 +0200)]
drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10
Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vasily Averin [Sat, 11 Sep 2021 07:40:08 +0000 (10:40 +0300)]
ipc: remove memcg accounting for sops objects in do_semtimedop()
Linus proposes to revert an accounting for sops objects in
do_semtimedop() because it's really just a temporary buffer
for a single semtimedop() system call.
This object can consume up to 2 pages, syscall is sleeping
one, size and duration can be controlled by user, and this
allocation can be repeated by many thread at the same time.
However Shakeel Butt pointed that there are much more popular
objects with the same life time and similar memory
consumption, the accounting of which was decided to be
rejected for performance reasons.
Considering at least 2 pages for task_struct and 2 pages for
the kernel stack, a back of the envelope calculation gives a
footprint amplification of <1.5 so this temporal buffer can be
safely ignored.
The factor would IMO be interesting if it was >> 2 (from the
PoV of excessive (ab)use, fine-grained accounting seems to be
currently unfeasible due to performance impact).
Link: https://lore.kernel.org/lkml/90e254df-0dfe-f080-011e-b7c53ee7fd20@virtuozzo.com/
Fixes:
18319498fdd4 ("memcg: enable accounting of ipc resources")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Tue, 14 Sep 2021 17:08:37 +0000 (11:08 -0600)]
io_uring: allow retry for O_NONBLOCK if async is supported
A common complaint is that using O_NONBLOCK files with io_uring can be a
bit of a pain. Be a bit nicer and allow normal retry IFF the file does
support async behavior. This makes it possible to use io_uring more
reliably with O_NONBLOCK files, for use cases where it either isn't
possible or feasible to modify the file flags.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
projects / linux-2.6-microblaze.git / log