git.monstr.eu Git - linux-2.6-microblaze.git/log

Merge tag 'linux_kselftest-fixes-6.12-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:

- fix test makefile to install tests directory without which the test
fails with errors

* tag 'linux_kselftest-fixes-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: hid: add the missing tests directory

Merge tag 'block-6.12-20241018' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Keith:
     - Fix target passthrough identifier (Nilay)
     - Fix tcp locking (Hannes)
     - Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
     - Remove unnecessary fallthrough statements (Tokunori)
     - Remove ready-without-media support (Greg)
     - Fix multipath partition scan deadlock (Keith)
     - Fix concurrent PCI reset and remove queue mapping (Maurizio)
     - Fabrics shutdown fixes (Nilay)

- Fix for a kerneldoc warning (Keith)

- Fix a race with blk-rq-qos and wakeups (Omar)

- Cleanup of checking for always-set tag_set (SurajSonawane2415)

- Fix for a crash with CPU hotplug notifiers (Ming)

- Don't allow zero-copy ublk on unprivileged device (Ming)

- Use array_index_nospec() for CDROM (Josh)

- Remove dead code in drbd (David)

- Tweaks to elevator loading (Breno)

* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
  cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
  nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
  nvme: make keep-alive synchronous operation
  nvme-loop: flush off pending I/O while shutting down loop controller
  nvme-pci: fix race condition between reset and nvme_dev_disable()
  ublk: don't allow user copy for unprivileged device
  blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
  nvme-multipath: defer partition scanning
  blk-mq: setup queue ->tag_set before initializing hctx
  elevator: Remove argument from elevator_find_get
  elevator: do not request_module if elevator exists
  drbd: Remove unused conn_lowest_minor
  nvme: disable CC.CRIME (NVME_CC_CRIME)
  nvme: delete unnecessary fallthru comment
  nvmet-rdma: use sbitmap to replace rsp free list
  block: Fix elevator_get_default() checking for NULL q->tag_set
  nvme: tcp: avoid race between queue_lock lock and destroy
  nvmet-passthru: clear EUID/NGUID/UUID while using loop target
  block: fix blk_rq_map_integrity_sg kernel-doc

Merge tag 'io_uring-6.12-20241018' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

- Fix a regression this merge window where cloning of registered
   buffers didn't take into account the dummy_ubuf

- Fix a race with reading how many SQRING entries are available,
   causing userspace to need to loop around io_uring_sqring_wait()
   rather than being able to rely on SQEs being available when it
   returned

- Ensure that the SQPOLL thread is TASK_RUNNING before running
   task_work off the cancelation exit path

* tag 'io_uring-6.12-20241018' of git://git.kernel.dk/linux:
  io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work
  io_uring/rsrc: ignore dummy_ubuf for buffer cloning
  io_uring/sqpoll: close race on waiting for sqring entries

Merge tag 'v6.12-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- Fix possible double free setting xattrs

- Fix slab out of bounds with large ioctl payload

- Remove three unused functions, and an unused variable that could be
   confusing

* tag 'v6.12-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Remove unused functions
  smb/client: Fix logically dead code
  smb: client: fix OOBs when building SMB2_IOCTL request
  smb: client: fix possible double free in smb2_set_ea()

Merge tag 'xfs-6.12-fixes-4' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Carlos Maiolino:

- Fix integer overflow in xrep_bmap

- Fix stale dealloc punching for COW IO

* tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: punch delalloc extents from the COW fork for COW writes
  xfs: set IOMAP_F_SHARED for all COW fork allocations
  xfs: share more code in xfs_buffered_write_iomap_begin
  xfs: support the COW fork in xfs_bmap_punch_delalloc_range
  xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock
  xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof
  xfs: factor out a xfs_file_write_zero_eof helper
  iomap: move locking out of iomap_write_delalloc_release
  iomap: remove iomap_file_buffered_write_punch_delalloc
  iomap: factor out a iomap_last_written_block helper
  xfs: fix integer overflow in xrep_bmap

Merge tag 'pm-6.12-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix two issues in the amd-pstate cpufreq driver and update the
  intel_rapl power capping driver with a new processor ID.

  Specifics:

   - Enable ACPI CPPC in amd_pstate_register_driver() after disabling it
     in amd_pstate_unregister_driver() when switching driver operation
     modes (Dhananjay Ugwekar)

   - Make amd-pstate use nominal performance as the maximum performance
     level when boost is disabled (Mario Limonciello)

   - Add ArrowLake-H to the list of processors where PL4 is supported in
     the MSR part of the intel_rapl power capping driver (Srinivas
     Pandruvada)"

* tag 'pm-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H
  cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
  cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems

Merge tag 'hwmon-for-v6.12-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
"Fix auto-detect regression in jc42 driver"

* tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
[PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again

Merge tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
  scattered fixes including a largish revert in mgag200, then amdgpu,
  vmwgfx and scattering of other minor ones.

  All seems pretty regular.

  msm:
   - Display:
      - move CRTC resource assignment to atomic_check otherwise to make
        consecutive calls to atomic_check() consistent
      - fix rounding / sign-extension issues with pclk calculation in
        case of DSC
      - cleanups to drop incorrect null checks in dpu snapshots
      - fix to use kvzalloc in dpu snapshot to avoid allocation issues
        in heavily loaded system cases
      - Fix to not program merge_3d block if dual LM is not being used
      - Fix to not flush merge_3d block if its not enabled otherwise
        this leads to false timeouts
   - GPU:
      - a7xx: add a fence wait before SMMU table update

  xe:
   - New workaround to Xe2 (Aradhya)
   - Fix unbalanced rpm put (Matthew Auld)
   - Remove fragile lock optimization (Matthew Brost)
   - Fix job release, delegating it to the drm scheduler (Matthew Brost)
   - Fix timestamp bit width for Xe2 (Lucas)
   - Fix external BO's dma-resv usag (Matthew Brost)
   - Fix returning success for timeout in wait_token (Nirmoy)
   - Initialize fence to avoid it being detected as signaled (Matthew
     Auld)
   - Improve cache flush for BMG (Matthew Auld)
   - Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)

  amdgpu:
   - SR-IOV fix
   - CS chunk handling fix
   - MES fixes
   - SMU13 fixes

  amdkfd:
   - VRAM usage reporting fix

  radeon:
   - Fix possible_clones handling

  i915:
   - Two DP bandwidth related MST fixes

  ast:
   - Clear EDID on unplugged connectors

  host1x:
   - Fix boot on Tegra186
   - Set DMA parameters

  mgag200:
   - Revert VBLANK support

  panel:
   - himax-hx83192: Adjust power and gamma

  qaic:
   - Sgtable loop fixes

  vmwgfx:
   - Limit display layout allocatino size
   - Handle allocation errors in connector checks
   - Clean up KMS code for 2d-only setup
   - Report surface-check errors correctly
   - Remove NULL test around kvfree()"

* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
  drm/ast: vga: Clear EDID if no display is connected
  drm/ast: sil164: Clear EDID if no display is connected
  Revert "drm/mgag200: Add vblank support"
  drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
  drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  drm/xe/bmg: improve cache flushing behaviour
  drm/xe/xe_sync: initialise ufence.signalled
  drm/xe/ufence: ufence can be signaled right after wait_woken
  drm/xe: Use bookkeep slots for external BO's in exec IOCTL
  drm/xe/query: Increase timestamp width
  drm/xe: Don't free job in TDR
  drm/xe: Take job list lock in xe_sched_add_pending_job
  drm/xe: fix unbalanced rpm put() with declare_wedged()
  drm/xe: fix unbalanced rpm put() with fence_fini()
  drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
  drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
  drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  drm/msm/a6xx+: Insert a fence wait before SMMU table update
  drm/msm/dpu: don't always program merge_3d block
  drm/msm/dpu: Don't always set merge_3d pending flush
  ...

mm: fix follow_pfnmap API lockdep assert

The lockdep asserts for the new follow_pfnmap() API "knows" that a
pfnmap always has a vma->vm_file, since that's the only way to create
such a mapping.

And that's actually true for all the normal cases. But not for the mmap
failure case, where the incomplete mapping is torn down and we have
cleared vma->vm_file because the failure occured before the file was
linked to the vma.

So this codepath does actually need to check for vm_file being NULL.

Reported-by: Jann Horn <jannh@google.com>
Fixes: 6da8e9634bb7 ("mm: new follow_pfnmap API")
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'pm-cpufreq'

Merge amd-pstate driver fixes for 6.12-rc4:

- Enable ACPI CPPC in amd_pstate_register_driver() after disabling
   it in amd_pstate_unregister_driver() during driver operation mode
   switch (Dhananjay Ugwekar).

- Make amd-pstate use nominal performance as the maximum performance
   level when boost is disabled (Mario Limonciello).

* pm-cpufreq:
  cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
  cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems

Merge tag 'iommu-fixes-v6.12-rc3' of git://git./linux/kernel/git/iommu/linux

Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:

   - Clarify warning message when failing to disable the MMU-500
     prefetcher

   - Fix undefined behaviour in calculation of L1 stream-table index
     when 32-bit StreamIDs are implemented

   - Replace a rogue comma with a semicolon

  Intel VT-d fix from Lu Baolu:

   - Fix incorrect pci_for_each_dma_alias() for non-PCI devices"

* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
  iommu/arm-smmu-v3: Convert comma to semicolon
  iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
  iommu/arm-smmu: Clarify MMU-500 CPRE workaround

Merge tag 'powerpc-6.12-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Madhavan Srinivasan:

- To prevent possible memory leak, free "name" on error in
opal_event_init()

Thanks to Michael Ellerman and 2639161967.

* tag 'powerpc-6.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Free name on error in opal_event_init()

Merge tag 's390-6.12-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Fix PCI error recovery by handling error events correctly

- Fix CCA crypto card behavior within protected execution environment

- Two KVM commits which fix virtual vs physical address handling bugs
   in KVM pfault handling

- Fix return code handling in pckmo_key2protkey()

- Deactivate sclp console as late as possible so that outstanding
   messages appear on the console instead of being dropped on reboot

- Convert newlines to CRLF instead of LFCR for the sclp vt220 driver,
   as required by the vt220 specification

- Initialize also psw mask in perf_arch_fetch_caller_regs() to make
   sure that user_mode(regs) will return false

- Update defconfigs

* tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: Update defconfigs
  s390: Initialize psw mask in perf_arch_fetch_caller_regs()
  s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
  s390/sclp: Deactivate sclp after all its users
  s390/pkey_pckmo: Return with success for valid protected key types
  KVM: s390: Change virtual to physical address access in diag 0x258 handler
  KVM: s390: gaccess: Check if guest address is in memslot
  s390/ap: Fix CCA crypto card behavior within protected execution environment
  s390/pci: Handle PCI error codes other than 0x3a

Merge tag 'drm-xe-fixes-2024-10-17' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes

Driver Changes:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jkldrex5733ldxrla75b4ayvhujjhw2kccmasl5rotoufoacj4@pkvlrrv4orc7

Merge tag 'x86_bugs_post_ibpb' of git://git./linux/kernel/git/tip/tip

Pull x86 IBPB fixes from Borislav Petkov:
"This fixes the IBPB implementation of older AMDs (< gen4) that do not
  flush the RSB (Return Address Stack) so you can still do some leaking
  when using a "=ibpb" mitigation for Retbleed or SRSO. Fix it by doing
  the flushing in software on those generations.

  IBPB is not the default setting so this is not likely to affect
  anybody in practice"

* tag 'x86_bugs_post_ibpb' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
  x86/bugs: Skip RSB fill at VMEXIT
  x86/entry: Have entry_ibpb() invalidate return predictions
  x86/cpufeatures: Add a IBPB_NO_RET BUG flag
  x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET

cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()

The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.

Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).

Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.

Fixes: 8270cb10c068 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.

  It is the usual shower of unrelated singletons - please see the
  individual changelogs for details"

* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
  maple_tree: add regression test for spanning store bug
  maple_tree: correct tree corruption on spanning store
  mm/mglru: only clear kswapd_failures if reclaimable
  mm/swapfile: skip HugeTLB pages for unuse_vma
  selftests: mm: fix the incorrect usage() info of khugepaged
  MAINTAINERS: add Jann as memory mapping/VMA reviewer
  mm: swap: prevent possible data-race in __try_to_reclaim_swap
  mm: khugepaged: fix the incorrect statistics when collapsing large file folios
  MAINTAINERS: kasan, kcov: add bugzilla links
  mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
  mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
  Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
  Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
  maple_tree: check for MA_STATE_BULK on setting wr_rebalance
  mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
  mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
  mm: remove unused stub for can_swapin_thp()
  mailmap: add an entry for Andy Chiu
  MAINTAINERS: add memory mapping/VMA co-maintainers
  fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
  ...

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Two clk driver fixes and a unit test fix:

   - Terminate the of_device_id table in the Samsung exynosautov920 clk
     driver so that device matching logic doesn't run off the end of the
     array into other memory and break matching for any kernel with this
     driver loaded

   - Properly limit the max clk ID in the Rockchip clk driver

   - Use clk kunit helpers in the clk tests so that memory isn't leaked
     after the test concludes"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: test: Fix some memory leaks
  clk: rockchip: fix finding of maximum clock ID
  clk: samsung: Fix out-of-bound access of of_match_node()

Merge tag 'drm-misc-fixes-2024-10-17' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

ast:
- Clear EDID on unplugged connectors

host1x:
- Fix boot on Tegra186
- Set DMA parameters

mgag200:
- Revert VBLANK support

panel:
- himax-hx83192: Adjust power and gamma

qaic:
- Sgtable loop fixes

vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box

Merge tag 'drm-intel-fixes-2024-10-17' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

- Two DP bandwidth related MST fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZxDLdML9Dwqkb1AW@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.12-2024-10-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.12-2024-10-16:

amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes

amdkfd:
- VRAM usage reporting fix

radeon:
- Fix possible_clones handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016200514.3520286-1-alexander.deucher@amd.com

Merge tag 'nvme-6.12-2024-10-18' of git://git.infradead.org/nvme into block-6.12

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.12

- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)"

* tag 'nvme-6.12-2024-10-18' of git://git.infradead.org/nvme:
  nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
  nvme: make keep-alive synchronous operation
  nvme-loop: flush off pending I/O while shutting down loop controller
  nvme-pci: fix race condition between reset and nvme_dev_disable()
  nvme-multipath: defer partition scanning
  nvme: disable CC.CRIME (NVME_CC_CRIME)
  nvme: delete unnecessary fallthru comment
  nvmet-rdma: use sbitmap to replace rsp free list
  nvme: tcp: avoid race between queue_lock lock and destroy
  nvmet-passthru: clear EUID/NGUID/UUID while using loop target
  block: fix blk_rq_map_integrity_sg kernel-doc

nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function

We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme: make keep-alive synchronous operation

The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:

Call Trace:
    autoremove_wake_function+0x0/0xbc (unreliable)
    __blk_mq_sched_dispatch_requests+0x114/0x24c
    blk_mq_sched_dispatch_requests+0x44/0x84
    blk_mq_run_hw_queue+0x140/0x220
    nvme_keep_alive_work+0xc8/0x19c [nvme_core]
    process_one_work+0x200/0x4e0
    worker_thread+0x340/0x504
    kthread+0x138/0x140
    start_kernel_thread+0x14/0x18

While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.

This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme-loop: flush off pending I/O while shutting down loop controller

While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.

This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme-pci: fix race condition between reset and nvme_dev_disable()

nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().

WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
          pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
  <TASK>
  ? blk_mq_pci_map_queues+0x87/0x3c0
  ? pci_irq_get_affinity+0x187/0x210
  blk_mq_pci_map_queues+0x87/0x3c0
  nvme_pci_map_queues+0x189/0x460 [nvme]
  blk_mq_update_nr_hw_queues+0x2a/0x40
  nvme_reset_work+0x1be/0x2a0 [nvme]

Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.

Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

- Disable software tag-based KASAN when compiling with GCC, as
   functions are incorrectly instrumented leading to a crash early
   during boot

- Fix pkey configuration for kernel threads when POE is enabled

- Fix invalid memory accesses in uprobes when targetting load-literal
   instructions

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  kasan: Disable Software Tag-Based KASAN with GCC
  Documentation/protection-keys: add AArch64 to documentation
  arm64: set POR_EL0 for kernel threads
  arm64: probes: Fix uprobes for big-endian kernels
  arm64: probes: Fix simulate_ldr*_literal()
  arm64: probes: Remove broken LDR (literal) uprobe support

Merge tag 'arm-fixes-6.12' of git://git./linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
"Most of the fixes this time are for platform specific drivers,
  addressing issues found through build testing on freescale, ep93xx,
  starfive, and npcm platforms, as as well as the ffa firmware.

  The fixes for the scmi firmware driver address compatibility problems
  found on broadcom machines.

  There are only two devicetree fixes, addressing incorrect in
  configuration on broadcom and marvell machines.

  The changes to the Documentation and MAINTAINERS files are for
  clarification only"

* tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: arm_ffa: Avoid string-fortify warning caused by memcpy()
  firmware: arm_scmi: Queue in scmi layer for mailbox implementation
  firmware: arm_ffa: Avoid string-fortify warning in export_uuid()
  firmware: arm_scmi: Give SMC transport precedence over mailbox
  firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
  Documentation/process: maintainer-soc: clarify submitting patches
  dmaengine: cirrus: check that output may be truncated
  dmaengine: cirrus: ERR_CAST() ioremap error
  MAINTAINERS: use the canonical soc mailing list address and mark it as L:
  ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
  arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbers
  soc: fsl: cpm1: qmc: Fix unused data compilation warning
  soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
  reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
  reset: npcm: convert comma to semicolon

Merge tag 'sound-6.12-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes, nothing really stands out:

   - Usual HD-audio quirks / device-specific fixes

   - Kconfig dependency fix for UM

   - A series of minor fixes for SoundWire

   - Updates of USB-audio LINE6 contact address"

* tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
  ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read
  ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read
  ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller()
  ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller
  ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects
  ALSA: scarlett2: Add error check after retrieving PEQ filter values
  ALSA: hda/cs8409: Fix possible NULL dereference
  sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML
  ALSA: line6: update contact information
  ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set()
  ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
  ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024

Merge tag 'net-6.12-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:

   - eth: mlx5: HWS, don't destroy more bwc queue locks than allocated

  Previous releases - regressions:

   - ipv4: give an IPv4 dev to blackhole_netdev

   - udp: compute L4 checksum as usual when not segmenting the skb

   - tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().

   - eth: mlx5e: don't call cleanup on profile rollback failure

   - eth: microchip: vcap api: fix memory leaks in
     vcap_api_encode_rule_test()

   - eth: enetc: disable Tx BD rings after they are empty

   - eth: macb: avoid 20s boot delay by skipping MDIO bus registration
     for fixed-link PHY

  Previous releases - always broken:

   - posix-clock: fix missing timespec64 check in pc_clock_settime()

   - genetlink: hold RCU in genlmsg_mcast()

   - mptcp: prevent MPC handshake on port-based signal endpoints

   - eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame

   - eth: stmmac: dwmac-tegra: fix link bring-up sequence

   - eth: bcmasp: fix potential memory leak in bcmasp_xmit()

  Misc:

   - add Andrew Lunn as a co-maintainer of all networking drivers"

* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net/mlx5e: Don't call cleanup on profile rollback failure
  net/mlx5: Unregister notifier on eswitch init failure
  net/mlx5: Fix command bitmask initialization
  net/mlx5: Check for invalid vector index on EQ creation
  net/mlx5: HWS, use lock classes for bwc locks
  net/mlx5: HWS, don't destroy more bwc queue locks than allocated
  net/mlx5: HWS, fixed double free in error flow of definer layout
  net/mlx5: HWS, removed wrong access to a number of rules variable
  mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
  net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
  vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
  net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
  net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
  net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
  net: phy: mdio-bcm-unimac: Add BCM6846 support
  dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
  udp: Compute L4 checksum as usual when not segmenting the skb
  genetlink: hold RCU in genlmsg_mcast()
  net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
  tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
  ...

maple_tree: add regression test for spanning store bug

Add a regression test to assert that, when performing a spanning store
which consumes the entirety of the rightmost right leaf node does not
result in maple tree corruption when doing so.

This achieves this by building a test tree of 3 levels and establishing a
store which ultimately results in a spanned store of this nature.

Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: correct tree corruption on spanning store

Patch series "maple_tree: correct tree corruption on spanning store", v3.

There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.

This bug seems far more likely to happen since commit f8d112a4e657
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.

We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.

The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.

This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.

The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.

The fix patch commit message goes into great detail as to how this occurs.

This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.

Bert has kindly tested the fix and confirmed it resolved his issues.  Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.

This patch (of 2):

There has been a subtle bug present in the maple tree implementation from
its inception.

This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.

A range may always ultimately span two leaf nodes.  In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.

This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().

In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.

When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.

When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e.  r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.

We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.

We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().

After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).

Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.

Consider the following tree:

Height
  0                             Root Node
                                 /      \
                 pivot = 0xffff /        \ pivot = ULONG_MAX
                               /          \
  1                       A [-----]       ...
                             /   \
             pivot = 0x4fff /     \ pivot = 0xffff
                           /       \
  2 (LEAVES)          B [-----]  [-----] C
                                      ^--- Last pivot 0xffff.

Now imagine we wish to store an entry in the range [0x4000, 0xffff] (note
that all ranges expressed in maple tree code are inclusive):

1. mas_store_gfp() descends the tree, finds node A at <=0xffff, then
   determines that this is a spanning store across nodes B and C. The mas
   state is set such that the current node from which we traverse further
   is node A.

2. In mas_wr_spanning_store() we try to find elements to the right of pivot
   0xffff by searching for an index of 0x10000:

    - mas_wr_walk_index() invokes mas_wr_walk_descend() and
      mas_wr_node_walk() in turn.

        - mas_wr_node_walk() loops over entries in node A until EITHER it
          finds an entry whose pivot equals or exceeds 0x10000 OR it
          reaches the final entry.

        - Since no entry has a pivot equal to or exceeding 0x10000, pivot
          0xffff is selected, leading to node C.

    - mas_wr_walk_traverse() resets the mas state to traverse node C. We
      loop around and invoke mas_wr_walk_descend() and mas_wr_node_walk()
      in turn once again.

         - Again, we reach the last entry in node C, which has a pivot of
           0xffff.

3. We then copy the elements to the left of 0x4000 in node B to the big
   node via mas_store_b_node(), and insert the new [0x4000, 0xffff] entry
   too.

4. We determine whether we have any entries to copy from the right of the
   end of the range via - and with r_mas set up at the entry at pivot
   0xffff, r_mas.offset <= r_mas.end, and then we DUPLICATE the entry at
   pivot 0xffff.

5. BUG! The maple tree is corrupted with a duplicate entry.

This requires a very specific set of circumstances - we must be spanning
the last element in a leaf node, which is the last element in the parent
node.

spanning store across two leaf nodes with a range that ends at that shared
pivot.

A potential solution to this problem would simply be to reset the walk
each time we traverse r_mas, however given the rarity of this situation it
seems that would be rather inefficient.

Instead, this patch detects if the right hand node is populated, i.e.  has
anything we need to copy.

We do so by only copying elements from the right of the entry being
inserted when the maximum value present exceeds the last, rather than
basing this on offset position.

The patch also updates some comments and eliminates the unused bool return
value in mas_wr_walk_index().

The work performed in commit f8d112a4e657 ("mm/mmap: avoid zeroing vma
tree in mmap_region()") seems to have made the probability of this event
much more likely, which is the point at which reports started to be
submitted concerning this bug.

The motivation for this change arose from Bert Karwatzki's report of
encountering mm instability after the release of kernel v6.12-rc1 which,
after the use of CONFIG_DEBUG_VM_MAPLE_TREE and similar configuration
options, was identified as maple tree corruption.

After Bert very generously provided his time and ability to reproduce this
event consistently, I was able to finally identify that the issue
discussed in this commit message was occurring for him.

Link: https://lkml.kernel.org/r/cover.1728314402.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/48b349a2a0f7c76e18772712d0997a5e12ab0a3b.1728314403.git.lorenzo.stoakes@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20241001023402.3374-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/all/CABXGCsOPwuoNOqSMmAvWO2Fz4TEmPnjFj-b7iF+XFRu1h7-+Dg@mail.gmail.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work

When the sqpoll is exiting and cancels pending work items, it may need
to run task_work. If this happens from within io_uring_cancel_generic(),
then it may be under waiting for the io_uring_task waitqueue. This
results in the below splat from the scheduler, as the ring mutex may be
attempted grabbed while in a TASK_INTERRUPTIBLE state.

Ensure that the task state is set appropriately for that, just like what
is done for the other cases in io_run_task_work().

do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc
WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140
Modules linked in:
CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456
Hardware name: linux,dummy-virt (DT)
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __might_sleep+0xf4/0x140
lr : __might_sleep+0xf4/0x140
sp : ffff80008c5e7830
x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230
x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50
x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180
x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90
x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b
x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000
x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001
x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180
Call trace:
__might_sleep+0xf4/0x140
mutex_lock+0x84/0x124
io_handle_tw_list+0xf4/0x260
tctx_task_work_run+0x94/0x340
io_run_task_work+0x1ec/0x3c0
io_uring_cancel_generic+0x364/0x524
io_sq_thread+0x820/0x124c
ret_from_fork+0x10/0x20

Cc: stable@vger.kernel.org
Fixes: af5d68f8892f ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'mlx5-misc-fixes-2024-10-15'

Tariq Toukan says:

====================
mlx5 misc fixes 2024-10-15

This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.

Series generated against:
commit 174714f0e505 ("selftests: drivers: net: fix name not defined")
====================

Link: https://patch.msgid.link/20241015093208.197603-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5e: Don't call cleanup on profile rollback failure

When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.

This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.

[  732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[  734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[  734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[  734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[  734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[  734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[  734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[  745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  745.538222] #PF: supervisor read access in kernel mode
<snipped>
[  745.551290] Call Trace:
[  745.551590]  <TASK>
[  745.551866]  ? __die+0x20/0x60
[  745.552218]  ? page_fault_oops+0x150/0x400
[  745.555307]  ? exc_page_fault+0x79/0x240
[  745.555729]  ? asm_exc_page_fault+0x22/0x30
[  745.556166]  ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[  745.556698]  auxiliary_bus_remove+0x18/0x30
[  745.557134]  device_release_driver_internal+0x1df/0x240
[  745.557654]  bus_remove_device+0xd7/0x140
[  745.558075]  device_del+0x15b/0x3c0
[  745.558456]  mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[  745.559112]  mlx5_unregister_device+0x34/0x50 [mlx5_core]
[  745.559686]  mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[  745.560203]  remove_one+0x4e/0xd0 [mlx5_core]
[  745.560694]  pci_device_remove+0x39/0xa0
[  745.561112]  device_release_driver_internal+0x1df/0x240
[  745.561631]  driver_detach+0x47/0x90
[  745.562022]  bus_remove_driver+0x84/0x100
[  745.562444]  pci_unregister_driver+0x3b/0x90
[  745.562890]  mlx5_cleanup+0xc/0x1b [mlx5_core]
[  745.563415]  __x64_sys_delete_module+0x14d/0x2f0
[  745.563886]  ? kmem_cache_free+0x1b0/0x460
[  745.564313]  ? lockdep_hardirqs_on_prepare+0xe2/0x190
[  745.564825]  do_syscall_64+0x6d/0x140
[  745.565223]  entry_SYSCALL_64_after_hwframe+0x4b/0x53
[  745.565725] RIP: 0033:0x7f1579b1288b

Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: Unregister notifier on eswitch init failure

It otherwise remains registered and a subsequent attempt at eswitch
enabling might trigger warnings of the sort:

[  682.589148] ------------[ cut here ]------------
[  682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered
[  682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90
[...snipped]
[  682.610052] Call Trace:
[  682.610369]  <TASK>
[  682.610663]  ? __warn+0x7c/0x110
[  682.611050]  ? notifier_chain_register+0x3e/0x90
[  682.611556]  ? report_bug+0x148/0x170
[  682.611977]  ? handle_bug+0x36/0x70
[  682.612384]  ? exc_invalid_op+0x13/0x60
[  682.612817]  ? asm_exc_invalid_op+0x16/0x20
[  682.613284]  ? notifier_chain_register+0x3e/0x90
[  682.613789]  atomic_notifier_chain_register+0x25/0x40
[  682.614322]  mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core]
[  682.614965]  mlx5_eswitch_enable+0xc9/0x100 [mlx5_core]
[  682.615551]  mlx5_device_enable_sriov+0x25/0x340 [mlx5_core]
[  682.616170]  mlx5_core_sriov_configure+0x50/0x170 [mlx5_core]
[  682.616789]  sriov_numvfs_store+0xb0/0x1b0
[  682.617248]  kernfs_fop_write_iter+0x117/0x1a0
[  682.617734]  vfs_write+0x231/0x3f0
[  682.618138]  ksys_write+0x63/0xe0
[  682.618536]  do_syscall_64+0x4c/0x100
[  682.618958]  entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fixes: 7624e58a8b3a ("net/mlx5: E-switch, register event handler before arming the event")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: Fix command bitmask initialization

Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.

In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.

Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]

Fix it by Initialize command bitmask correctly.

While at it, re-write the code for better understanding.

[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>

Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: Check for invalid vector index on EQ creation

Currently, mlx5 driver does not enforce vector index to be lower than
the maximum number of supported completion vectors when requesting a
new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to
acquire an IRQ with an improper vector index.

To prevent the case above, enforce that vector index value is
valid and lower than maximum in mlx5_comp_eqn_get() before handling the
request.

Fixes: f14c1a14e632 ("net/mlx5: Allocate completion EQs dynamically")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: HWS, use lock classes for bwc locks

The HWS BWC API uses one lock per queue and usually acquires one of
them, except when doing changes which require locking all queues in
order. Naturally, lockdep isn't too happy about acquiring the same lock
class multiple times, so inform it that each queue lock is a different
class to avoid false positives.

Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: HWS, don't destroy more bwc queue locks than allocated

hws_send_queues_bwc_locks_destroy destroyed more queue locks than
allocated, leading to memory corruption (occasionally) and warnings such
as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because
sometimes, the 'mutex' being destroyed was random memory.
The severity of this problem is proportional to the number of queues
configured because the code overreaches beyond the end of the
bwc_send_queue_locks array by 2x its length.

Fix that by using the correct number of bwc queues.

Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: HWS, fixed double free in error flow of definer layout

Fix error flow bug that could lead to double free of a buffer
during a failure to calculate a suitable definer layout.

Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: HWS, removed wrong access to a number of rules variable

Removed wrong access to the num_of_rules field of the matcher.
This is a usual u32 variable, but the access was as if it was atomic.

This fixes the following CI warnings:
mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty;
the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment]

Fixes: 510f9f61a112 ("net/mlx5: HWS, added API and enabled HWS support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409291101.6NdtMFVC-lkp@intel.com/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow

Syzkaller reported this splat:

  ==================================================================
  BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
  Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662

  CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:94 [inline]
   dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
   print_address_description mm/kasan/report.c:377 [inline]
   print_report+0xc3/0x620 mm/kasan/report.c:488
   kasan_report+0xd9/0x110 mm/kasan/report.c:601
   mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
   mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
   mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
   mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
   genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
   genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
   genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
   netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
   genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
   netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
   netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
   netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
   sock_sendmsg_nosec net/socket.c:729 [inline]
   __sock_sendmsg net/socket.c:744 [inline]
   ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
   ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
   __sys_sendmsg+0x117/0x1f0 net/socket.c:2690
   do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
   __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
   do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
   entry_SYSENTER_compat_after_hwframe+0x84/0x8e
  RIP: 0023:0xf7fe4579
  Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
  RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
  RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
  R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
   </TASK>

  Allocated by task 5387:
   kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
   kasan_save_track+0x14/0x30 mm/kasan/common.c:68
   poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
   __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
   kmalloc_noprof include/linux/slab.h:878 [inline]
   kzalloc_noprof include/linux/slab.h:1014 [inline]
   subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803
   subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956
   __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline]
   tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167
   mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764
   __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592
   mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642
   mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline]
   mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943
   mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777
   process_one_work+0x958/0x1b30 kernel/workqueue.c:3229
   process_scheduled_works kernel/workqueue.c:3310 [inline]
   worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
   kthread+0x2c1/0x3a0 kernel/kthread.c:389
   ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Freed by task 113:
   kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
   kasan_save_track+0x14/0x30 mm/kasan/common.c:68
   kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
   poison_slab_object mm/kasan/common.c:247 [inline]
   __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
   kasan_slab_free include/linux/kasan.h:230 [inline]
   slab_free_hook mm/slub.c:2342 [inline]
   slab_free mm/slub.c:4579 [inline]
   kfree+0x14f/0x4b0 mm/slub.c:4727
   kvfree+0x47/0x50 mm/util.c:701
   kvfree_rcu_list+0xf5/0x2c0 kernel/rcu/tree.c:3423
   kvfree_rcu_drain_ready kernel/rcu/tree.c:3563 [inline]
   kfree_rcu_monitor+0x503/0x8b0 kernel/rcu/tree.c:3632
   kfree_rcu_shrink_scan+0x245/0x3a0 kernel/rcu/tree.c:3966
   do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
   shrink_slab+0x32b/0x12a0 mm/shrinker.c:662
   shrink_one+0x47e/0x7b0 mm/vmscan.c:4818
   shrink_many mm/vmscan.c:4879 [inline]
   lru_gen_shrink_node mm/vmscan.c:4957 [inline]
   shrink_node+0x2452/0x39d0 mm/vmscan.c:5937
   kswapd_shrink_node mm/vmscan.c:6765 [inline]
   balance_pgdat+0xc19/0x18f0 mm/vmscan.c:6957
   kswapd+0x5ea/0xbf0 mm/vmscan.c:7226
   kthread+0x2c1/0x3a0 kernel/kthread.c:389
   ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Last potentially related work creation:
   kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
   __kasan_record_aux_stack+0xba/0xd0 mm/kasan/generic.c:541
   kvfree_call_rcu+0x74/0xbe0 kernel/rcu/tree.c:3810
   subflow_ulp_release+0x2ae/0x350 net/mptcp/subflow.c:2009
   tcp_cleanup_ulp+0x7c/0x130 net/ipv4/tcp_ulp.c:124
   tcp_v4_destroy_sock+0x1c5/0x6a0 net/ipv4/tcp_ipv4.c:2541
   inet_csk_destroy_sock+0x1a3/0x440 net/ipv4/inet_connection_sock.c:1293
   tcp_done+0x252/0x350 net/ipv4/tcp.c:4870
   tcp_rcv_state_process+0x379b/0x4f30 net/ipv4/tcp_input.c:6933
   tcp_v4_do_rcv+0x1ad/0xa90 net/ipv4/tcp_ipv4.c:1938
   sk_backlog_rcv include/net/sock.h:1115 [inline]
   __release_sock+0x31b/0x400 net/core/sock.c:3072
   __tcp_close+0x4f3/0xff0 net/ipv4/tcp.c:3142
   __mptcp_close_ssk+0x331/0x14d0 net/mptcp/protocol.c:2489
   mptcp_close_ssk net/mptcp/protocol.c:2543 [inline]
   mptcp_close_ssk+0x150/0x220 net/mptcp/protocol.c:2526
   mptcp_pm_nl_rm_addr_or_subflow+0x2be/0xcc0 net/mptcp/pm_netlink.c:878
   mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
   mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
   mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
   genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
   genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
   genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
   netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
   genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
   netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
   netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
   netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
   sock_sendmsg_nosec net/socket.c:729 [inline]
   __sock_sendmsg net/socket.c:744 [inline]
   ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
   ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
   __sys_sendmsg+0x117/0x1f0 net/socket.c:2690
   do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
   __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
   do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
   entry_SYSENTER_compat_after_hwframe+0x84/0x8e

  The buggy address belongs to the object at ffff8880569ac800
   which belongs to the cache kmalloc-512 of size 512
  The buggy address is located 88 bytes inside of
   freed 512-byte region [ffff8880569ac800, ffff8880569aca00)

  The buggy address belongs to the physical page:
  page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x569ac
  head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
  flags: 0x4fff00000000040(head|node=1|zone=1|lastcpupid=0x7ff)
  page_type: f5(slab)
  raw: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122
  raw: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000
  head: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122
  head: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000
  head: 04fff00000000002 ffffea00015a6b01 ffffffffffffffff 0000000000000000
  head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: kasan: bad access detected
  page_owner tracks the page as allocated
  page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 10238, tgid 10238 (kworker/u32:6), ts 597403252405, free_ts 597177952947
   set_page_owner include/linux/page_owner.h:32 [inline]
   post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1537
   prep_new_page mm/page_alloc.c:1545 [inline]
   get_page_from_freelist+0x101e/0x3070 mm/page_alloc.c:3457
   __alloc_pages_noprof+0x223/0x25a0 mm/page_alloc.c:4733
   alloc_pages_mpol_noprof+0x2c9/0x610 mm/mempolicy.c:2265
   alloc_slab_page mm/slub.c:2412 [inline]
   allocate_slab mm/slub.c:2578 [inline]
   new_slab+0x2ba/0x3f0 mm/slub.c:2631
   ___slab_alloc+0xd1d/0x16f0 mm/slub.c:3818
   __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908
   __slab_alloc_node mm/slub.c:3961 [inline]
   slab_alloc_node mm/slub.c:4122 [inline]
   __kmalloc_cache_noprof+0x2c5/0x310 mm/slub.c:4290
   kmalloc_noprof include/linux/slab.h:878 [inline]
   kzalloc_noprof include/linux/slab.h:1014 [inline]
   mld_add_delrec net/ipv6/mcast.c:743 [inline]
   igmp6_leave_group net/ipv6/mcast.c:2625 [inline]
   igmp6_group_dropped+0x4ab/0xe40 net/ipv6/mcast.c:723
   __ipv6_dev_mc_dec+0x281/0x360 net/ipv6/mcast.c:979
   addrconf_leave_solict net/ipv6/addrconf.c:2253 [inline]
   __ipv6_ifa_notify+0x3f6/0xc30 net/ipv6/addrconf.c:6283
   addrconf_ifdown.isra.0+0xef9/0x1a20 net/ipv6/addrconf.c:3982
   addrconf_notify+0x220/0x19c0 net/ipv6/addrconf.c:3781
   notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
   call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1996
   call_netdevice_notifiers_extack net/core/dev.c:2034 [inline]
   call_netdevice_notifiers net/core/dev.c:2048 [inline]
   dev_close_many+0x333/0x6a0 net/core/dev.c:1589
  page last free pid 13136 tgid 13136 stack trace:
   reset_page_owner include/linux/page_owner.h:25 [inline]
   free_pages_prepare mm/page_alloc.c:1108 [inline]
   free_unref_page+0x5f4/0xdc0 mm/page_alloc.c:2638
   stack_depot_save_flags+0x2da/0x900 lib/stackdepot.c:666
   kasan_save_stack+0x42/0x60 mm/kasan/common.c:48
   kasan_save_track+0x14/0x30 mm/kasan/common.c:68
   unpoison_slab_object mm/kasan/common.c:319 [inline]
   __kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:345
   kasan_slab_alloc include/linux/kasan.h:247 [inline]
   slab_post_alloc_hook mm/slub.c:4085 [inline]
   slab_alloc_node mm/slub.c:4134 [inline]
   kmem_cache_alloc_noprof+0x121/0x2f0 mm/slub.c:4141
   skb_clone+0x190/0x3f0 net/core/skbuff.c:2084
   do_one_broadcast net/netlink/af_netlink.c:1462 [inline]
   netlink_broadcast_filtered+0xb11/0xef0 net/netlink/af_netlink.c:1540
   netlink_broadcast+0x39/0x50 net/netlink/af_netlink.c:1564
   uevent_net_broadcast_untagged lib/kobject_uevent.c:331 [inline]
   kobject_uevent_net_broadcast lib/kobject_uevent.c:410 [inline]
   kobject_uevent_env+0xacd/0x1670 lib/kobject_uevent.c:608
   device_del+0x623/0x9f0 drivers/base/core.c:3882
   snd_card_disconnect.part.0+0x58a/0x7c0 sound/core/init.c:546
   snd_card_disconnect+0x1f/0x30 sound/core/init.c:495
   snd_usx2y_disconnect+0xe9/0x1f0 sound/usb/usx2y/usbusx2y.c:417
   usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
   device_remove drivers/base/dd.c:569 [inline]
   device_remove+0x122/0x170 drivers/base/dd.c:561

That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)',
which will initiate the release of its memory. Even if it is very likely
the release and the re-utilisation will be done later on, it is of
course better to avoid any issues and read the content of 'subflow'
before closing it.

Fixes: 1c1f72137598 ("mptcp: pm: only decrement add_addr_accepted for MPJ req")
Cc: stable@vger.kernel.org
Reported-by: syzbot+3c8b7a8e7df6a2a226ca@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/670d7337.050a0220.4cbc0.004f.GAE@google.com
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20241015-net-mptcp-uaf-pm-rm-v1-1-c4ee5d987a64@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init

The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must
only touch as many descriptors, otherwise it ends up corrupting unrelated
memory. Fix the loop iteration count accordingly.

Fixes: c57e55819443 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015081755.31060-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame

Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.

If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.

vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:

  page = virt_to_page(xdpf->data);
  tbi->dma_addr = page_pool_get_dma_addr(page) +
                  VMXNET3_XDP_HEADROOM;
  dma_sync_single_for_device(&adapter->pdev->dev,
                             tbi->dma_addr, buf_size,
                             DMA_TO_DEVICE);

The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start.

Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.")
Reported-by: Andrew Sauber <andrew.sauber@isovalent.com>
Reported-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'drm-msm-fixes-2024-10-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Fixes for v6.12

Display:
- move CRTC resource assignment to atomic_check otherwise to make
  consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
  case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
  in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
  this leads to false timeouts

GPU:
- a7xx: add a fence wait before SMMU table update

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsp3Zbd_H3FhHdRz9yCYA4wxX4SenpYRSk=Mx2d8GMSuQ@mail.gmail.com

mm/mglru: only clear kswapd_failures if reclaimable

lru_gen_shrink_node() unconditionally clears kswapd_failures, which can
prevent kswapd from sleeping and cause 100% kswapd cpu usage even when
kswapd repeatedly fails to make progress in reclaim.

Only clear kswap_failures in lru_gen_shrink_node() if reclaim makes some
progress, similar to shrink_node().

I happened to run into this problem in one of my tests recently. It
requires a combination of several conditions: The allocator needs to
allocate a right amount of pages such that it can wake up kswapd
without itself being OOM killed; there is no memory for kswapd to
reclaim (My test disables swap and cleans page cache first); no other
process frees enough memory at the same time.

Link: https://lkml.kernel.org/r/20241014221211.832591-1-weixugc@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Wei Xu <weixugc@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens <heftig@archlinux.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/swapfile: skip HugeTLB pages for unuse_vma

I got a bad pud error and lost a 1GB HugeTLB when calling swapoff.  The
problem can be reproduced by the following steps:

1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:

  mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)

We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace.  And therefore the HugeTLB pages will never
be freed because we lost it from page table.  We can skip HugeTLB pages
for unuse_vma to fix it.

Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c4c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests: mm: fix the incorrect usage() info of khugepaged

The mount option of tmpfs should be huge=advise, not madvise which is not
supported and may mislead the users.

Link: https://lkml.kernel.org/r/20241015020257.139235-1-sunnanyong@huawei.com
Fixes: 1b03d0d558a2 ("selftests/vm: add thp collapse file and tmpfs testing")
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add Jann as memory mapping/VMA reviewer

Add myself as a reviewer for memory mapping / VMA code. I will probably
only reply to patches sporadically, but hopefully this will help me keep
up with changes that look interesting security-wise.

Link: https://lkml.kernel.org/r/20241014-maintainers-mmap-reviewer-v1-1-50dce0514752@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: swap: prevent possible data-race in __try_to_reclaim_swap

A report [1] was uploaded from syzbot.

In the previous commit 862590ac3708 ("mm: swap: allow cache reclaim to
skip slot cache"), the __try_to_reclaim_swap() function reads offset and
folio->entry from folio without folio_lock protection.

In the currently reported KCSAN log, it is assumed that the actual
data-race will not occur because the calltrace that does WRITE already
obtains the folio_lock and then writes.

However, the existing __try_to_reclaim_swap() function was already
implemented to perform reads under folio_lock protection [1], and there is
a risk of a data-race occurring through a function other than the one
shown in the KCSAN log.

Therefore, I think it is appropriate to change
read operations for folio to be performed under folio_lock.

[1]

==================================================================
BUG: KCSAN: data-race in __delete_from_swap_cache / __try_to_reclaim_swap

write to 0xffffea0004c90328 of 8 bytes by task 5186 on cpu 0:
__delete_from_swap_cache+0x1f0/0x290 mm/swap_state.c:163
delete_from_swap_cache+0x72/0xe0 mm/swap_state.c:243
folio_free_swap+0x1d8/0x1f0 mm/swapfile.c:1850
free_swap_cache mm/swap_state.c:293 [inline]
free_pages_and_swap_cache+0x1fc/0x410 mm/swap_state.c:325
__tlb_batch_free_encoded_pages mm/mmu_gather.c:136 [inline]
tlb_batch_pages_flush mm/mmu_gather.c:149 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:366 [inline]
tlb_flush_mmu+0x2cf/0x440 mm/mmu_gather.c:373
zap_pte_range mm/memory.c:1700 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0x1f3c/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
do_group_exit+0x102/0x150 kernel/exit.c:1088
get_signal+0xf2a/0x1070 kernel/signal.c:2917
arch_do_signal_or_restart+0x95/0x4b0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x59/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f

read to 0xffffea0004c90328 of 8 bytes by task 5189 on cpu 1:
__try_to_reclaim_swap+0x9d/0x510 mm/swapfile.c:198
free_swap_and_cache_nr+0x45d/0x8a0 mm/swapfile.c:1915
zap_pte_range mm/memory.c:1656 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0xcf8/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
__do_sys_exit kernel/exit.c:1055 [inline]
__se_sys_exit kernel/exit.c:1053 [inline]
__x64_sys_exit+0x1f/0x20 kernel/exit.c:1053
x64_sys_call+0x2d46/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:61
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f

value changed: 0x0000000000000242 -> 0x0000000000000000

Link: https://lkml.kernel.org/r/20241007070623.23340-1-aha310510@gmail.com
Reported-by: syzbot+fa43f1b63e3aa6f66329@syzkaller.appspotmail.com
Fixes: 862590ac3708 ("mm: swap: allow cache reclaim to skip slot cache")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: khugepaged: fix the incorrect statistics when collapsing large file folios

Khugepaged already supports collapsing file large folios (including shmem
mTHP) by commit 7de856ffd007 ("mm: khugepaged: support shmem mTHP
collapse"), and the control parameters in khugepaged:
'khugepaged_max_ptes_swap' and 'khugepaged_max_ptes_none', still compare
based on PTE granularity to determine whether a file collapse is needed.
However, the statistics for 'present' and 'swap' in
hpage_collapse_scan_file() do not take into account the large folios,
which may lead to incorrect judgments regarding the
khugepaged_max_ptes_swap/none parameters, resulting in unnecessary file
collapses.

To fix this issue, take into account the large folios' statistics for
'present' and 'swap' variables in the hpage_collapse_scan_file().

Link: https://lkml.kernel.org/r/c76305d96d12d030a1a346b50503d148364246d2.1728901391.git.baolin.wang@linux.alibaba.com
Fixes: 7de856ffd007 ("mm: khugepaged: support shmem mTHP collapse")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: kasan, kcov: add bugzilla links

Add links to the Bugzilla component that's used to track KASAN and KCOV
issues.

Link: https://lkml.kernel.org/r/20241012225524.117871-1-andrey.konovalov@linux.dev
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: don't install PMD mappings when THPs are disabled by the hw/process/vma

We (or rather, readahead logic :) ) might be allocating a THP in the
pagecache and then try mapping it into a process that explicitly disabled
THP: we might end up installing PMD mappings.

This is a problem for s390x KVM, which explicitly remaps all PMD-mapped
THPs to be PTE-mapped in s390_enable_sie()->thp_split_mm(), before
starting the VM.

For example, starting a VM backed on a file system with large folios
supported makes the VM crash when the VM tries accessing such a mapping
using KVM.

Is it also a problem when the HW disabled THP using
TRANSPARENT_HUGEPAGE_UNSUPPORTED? At least on x86 this would be the case
without X86_FEATURE_PSE.

In the future, we might be able to do better on s390x and only disallow
PMD mappings -- what s390x and likely TRANSPARENT_HUGEPAGE_UNSUPPORTED
really wants. For now, fix it by essentially performing the same check as
would be done in __thp_vma_allowable_orders() or in shmem code, where this
works as expected, and disallow PMD mappings, making us fallback to PTE
mappings.

Link: https://lkml.kernel.org/r/20241011102445.934409-3-david@redhat.com
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()

Patch series "mm: don't install PMD mappings when THPs are disabled by the
hw/process/vma".

During testing, it was found that we can get PMD mappings in processes
where THP (and more precisely, PMD mappings) are supposed to be disabled.
While it works as expected for anon+shmem, the pagecache is the
problematic bit.

For s390 KVM this currently means that a VM backed by a file located on
filesystem with large folio support can crash when KVM tries accessing the
problematic page, because the readahead logic might decide to use a
PMD-sized THP and faulting it into the page tables will install a PMD
mapping, something that s390 KVM cannot tolerate.

This might also be a problem with HW that does not support PMD mappings,
but I did not try reproducing it.

Fix it by respecting the ways to disable THPs when deciding whether we can
install a PMD mapping. khugepaged should already be taking care of not
collapsing if THPs are effectively disabled for the hw/process/vma.

This patch (of 2):

Add vma_thp_disabled() and thp_disabled_by_hw() helpers to be shared by
shmem_allowable_huge_orders() and __thp_vma_allowable_orders().

[david@redhat.com: rename to vma_thp_disabled(), split out thp_disabled_by_hw() ]
Link: https://lkml.kernel.org/r/20241011102445.934409-2-david@redhat.com
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Boqiao Fu <bfu@redhat.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs

DAMON GitHub repos have moved from awslabs GitHub org to damonitor org[1].
Following the change, URLs on documents are also updated[2]. However,
commit 2e9b3d6e2e59 ("Docs/damon/maintainer-profile: add links in place"),
which was added just after the update, was using the deprecated GitHub
URLs. Update those to use damonitor GitHub URLs instead.

[1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org
[2] https://lore.kernel.org/20240826015741.80707-2-sj@kernel.org

Link: https://lkml.kernel.org/r/20241011170154.70651-3-sj@kernel.org
Fixes: 2e9b3d6e2e59 ("Docs/damon/maintainer-profile: add links in place")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/damon/maintainer-profile: add missing '_' suffixes for external web links

Patch series "Docs/damon/maintainer-profile: a couple of minor hotfixes".

DAMON maintainer-profile.rst file patches[1] that were merged into the
v6.12-rc1 have a couple of minor mistakes.  Fix those.

[1] https://lore.kernel.org/20240826015741.80707-1-sj@kernel.org

This patch (of 2):

Links to external web pages on DAMON's maintainer-profile.rst are missing
'_' suffixes.  As a result, rendered document is having only verbose URLs
that cannot be clicked.  Fix those.

Also, update the link texts for git trees to contain the names of the
trees, for better readability and avoiding below Sphinx warning.

    maintainer-profile.rst:4: WARNING: Duplicate explicit target name: "tree".

Link: https://lkml.kernel.org/r/20241011170154.70651-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241011170154.70651-2-sj@kernel.org
Fixes: 2e9b3d6e2e59 ("Docs/damon/maintainer-profile: add links in place")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: check for MA_STATE_BULK on setting wr_rebalance

It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type.
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path. Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.

Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()

This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.

Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes: 5d659bbb52a2 ("maple_tree: introduce mas_wr_store_type()")
Suggested-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Sidhartha <sidhartha.kumar@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point

The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS. This resulted in the incorrect trace result:

text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed

The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.

Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.

And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.

After the fix, the trace result looks correct:

text-hugepage-7291 [004] 128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed

Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes: 4c9473e87e75 ("mm/khugepaged: add tracepoint to collapse_file()")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Gautam Menghani <gautammenghani201@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()

The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not
freed in damon_sysfs_test_add_targets(), which cause the following memory
leak, free it to fix it.

unreferenced object 0xffffff80c2a8db80 (size 96):
  comm "kunit_try_catch", pid 187, jiffies 4294894363
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 0):
    [<0000000001e3714d>] kmemleak_alloc+0x34/0x40
    [<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4
    [<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738
    [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac
    [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<00000000adf936cf>] kthread+0x2e8/0x374
    [<0000000041bb1628>] ret_from_fork+0x10/0x20

Link: https://lkml.kernel.org/r/20241010125323.3127187-1-ruanjinjie@huawei.com
Fixes: b8ee5575f763 ("mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove unused stub for can_swapin_thp()

When can_swapin_thp() is unused, it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:

mm/memory.c:4184:20: error: unused function 'can_swapin_thp' [-Werror,-Wunused-function]

Fix this by removing the unused stub.

See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Link: https://lkml.kernel.org/r/20241008191329.2332346-1-andriy.shevchenko@linux.intel.com
Fixes: 242d12c98174 ("mm: support large folios swap-in for sync io devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add an entry for Andy Chiu

Map my outdated addresses within mailmap.

Link: https://lkml.kernel.org/r/20241009144934.43027-1-andybnac@gmail.com
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Leon Chien <leonchien@synology.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add memory mapping/VMA co-maintainers

Add myself and Liam as co-maintainers of the memory mapping and VMA code
alongside Andrew as we are heavily involved in its implementation and
maintenance.

Link: https://lkml.kernel.org/r/20241009201032.6130-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization

show show_smap_vma_flags() has been a using misspelled initializer in
mnemonics[] - it needed to initialize 2 element array of char and it used
NUL-padded 2 character string literals (i.e.  3-element initializer).

This has been spotted by gcc-15[*]; prior to that gcc quietly dropped the
3rd eleemnt of initializers.  To fix this we are increasing the size of
mnemonics[] (from mnemonics[BITS_PER_LONG][2] to
mnemonics[BITS_PER_LONG][3]) to accomodate the NUL-padded string literals.

This also helps us in simplyfying the logic for printing of the flags as
instead of printing each character from the mnemonics[], we can just print
the mnemonics[] using seq_printf.

[*]: fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
  917 |                 [0 ... (BITS_PER_LONG-1)] = "??",
      |                                                 ^~~~
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
...

Stephen pointed out:

: The C standard explicitly allows for a string initializer to be too long
: due to the NUL byte at the end ...  so this warning may be overzealous.

but let's make the warning go away anwyay.

Link: https://lkml.kernel.org/r/20241005063700.2241027-1-brahmajit.xyz@gmail.com
Link: https://lkml.kernel.org/r/20241003093040.47c08382@canb.auug.org.au
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib: alloc_tag_module_unload must wait for pending kfree_rcu calls

Ben Greear reports following splat:
------------[ cut here ]------------
net/netfilter/nf_nat_core.c:1114 module nf_nat func:nf_nat_register_fn has 256 allocated at module unload
WARNING: CPU: 1 PID: 10421 at lib/alloc_tag.c:168 alloc_tag_module_unload+0x22b/0x3f0
Modules linked in: nf_nat(-) btrfs ufs qnx4 hfsplus hfs minix vfat msdos fat
...
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 08/04/2020
RIP: 0010:alloc_tag_module_unload+0x22b/0x3f0
  codetag_unload_module+0x19b/0x2a0
  ? codetag_load_module+0x80/0x80

nf_nat module exit calls kfree_rcu on those addresses, but the free
operation is likely still pending by the time alloc_tag checks for leaks.

Wait for outstanding kfree_rcu operations to complete before checking
resolves this warning.

Reproducer:
unshare -n iptables-nft -t nat -A PREROUTING -p tcp
grep nf_nat /proc/allocinfo # will list 4 allocations
rmmod nft_chain_nat
rmmod nf_nat                # will WARN.

[akpm@linux-foundation.org: add comment]
Link: https://lkml.kernel.org/r/20241007205236.11847-1-fw@strlen.de
Fixes: a473573964e5 ("lib: code tagging module support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/bdaaef9d-4364-4171-b82b-bcfc12e207eb@candelatech.com/
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mremap: fix move_normal_pmd/retract_page_tables race

In mremap(), move_page_tables() looks at the type of the PMD entry and the
specified address range to figure out by which method the next chunk of
page table entries should be moved.

At that point, the mmap_lock is held in write mode, but no rmap locks are
held yet.  For PMD entries that point to page tables and are fully covered
by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called,
which first takes rmap locks, then does move_normal_pmd().
move_normal_pmd() takes the necessary page table locks at source and
destination, then moves an entire page table from the source to the
destination.

The problem is: The rmap locks, which protect against concurrent page
table removal by retract_page_tables() in the THP code, are only taken
after the PMD entry has been read and it has been decided how to move it.
So we can race as follows (with two processes that have mappings of the
same tmpfs file that is stored on a tmpfs mount with huge=advise); note
that process A accesses page tables through the MM while process B does it
through the file rmap:

process A                      process B
=========                      =========
mremap
  mremap_to
    move_vma
      move_page_tables
        get_old_pmd
        alloc_new_pmd
                      *** PREEMPT ***
                               madvise(MADV_COLLAPSE)
                                 do_madvise
                                   madvise_walk_vmas
                                     madvise_vma_behavior
                                       madvise_collapse
                                         hpage_collapse_scan_file
                                           collapse_file
                                             retract_page_tables
                                               i_mmap_lock_read(mapping)
                                               pmdp_collapse_flush
                                               i_mmap_unlock_read(mapping)
        move_pgt_entry(NORMAL_PMD, ...)
          take_rmap_locks
          move_normal_pmd
          drop_rmap_locks

When this happens, move_normal_pmd() can end up creating bogus PMD entries
in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`.  The effect
depends on arch-specific and machine-specific details; on x86, you can end
up with physical page 0 mapped as a page table, which is likely
exploitable for user->kernel privilege escalation.

Fix the race by letting process B recheck that the PMD still points to a
page table after the rmap locks have been taken.  Otherwise, we bail and
let the caller fall back to the PTE-level copying path, which will then
bail immediately at the pmd_none() check.

Bug reachability: Reaching this bug requires that you can create
shmem/file THP mappings - anonymous THP uses different code that doesn't
zap stuff under rmap locks.  File THP is gated on an experimental config
flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need
shmem THP to hit this bug.  As far as I know, getting shmem THP normally
requires that you can mount your own tmpfs with the right mount flags,
which would require creating your own user+mount namespace; though I don't
know if some distros maybe enable shmem THP by default or something like
that.

Bug impact: This issue can likely be used for user->kernel privilege
escalation when it is reachable.

Link: https://lkml.kernel.org/r/20241007-move_normal_pmd-vs-collapse-fix-2-v1-1-5ead9631f2ea@google.com
Fixes: 1d65b771bc08 ("mm/khugepaged: retract_page_tables() without mmap or vma lock")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Closes: https://project-zero.issues.chromium.org/371047675
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: percpu: increase PERCPU_DYNAMIC_SIZE_SHIFT on certain builds.

Arnd reported a build failure due to the BUILD_BUG_ON() statement in
alloc_kmem_cache_cpus().  The test

  PERCPU_DYNAMIC_EARLY_SIZE < NR_KMALLOC_TYPES * KMALLOC_SHIFT_HIGH * sizeof(struct kmem_cache_cpu)

The factors that increase the right side of the equation:
- PAGE_SIZE > 4KiB increases KMALLOC_SHIFT_HIGH
- For the local_lock_t in kmem_cache_cpu:
  - PREEMPT_RT adds an actual lock.
  - LOCKDEP increases the size of the lock.
  - LOCK_STAT adds additional bytes plus padding to the lockdep
    structure.

The net difference with and without PREEMPT_RT is 88 bytes for the
lock_lock_t, 96 bytes for kmem_cache_cpu due to additional padding.  This
is enough to exceed the 80KiB limit with 16KiB page size - the 8KiB page
size is fine.

Increase PERCPU_DYNAMIC_SIZE_SHIFT to 13 on configs with PAGE_SIZE larger
than 4KiB and LOCKDEP enabled.

Link: https://lkml.kernel.org/r/20241007143049.gyMpEu89@linutronix.de
Fixes: d8fccd9ca5f9 ("arm64: Allow to enable PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020326.iaZIteIx-lkp@intel.com/
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/20241004095702.637528-1-arnd@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: fix deadlock for fork after pthread_create on ARM

On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.

Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: replace atomic_bool with pthread_barrier_t

Patch series "selftests/mm: fix deadlock after pthread_create".

On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.

Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.

Apply the same fix to the wp-fork-with-event test.

This patch (of 2):

Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.

The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.

Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fat: fix uninitialized variable

syszbot produced this with a corrupted fs image. In theory, however an IO
error would trigger this also.

This affects just an error report, so should not be a serious error.

Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp
Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: propagate directory read errors from nilfs_find_entry()

Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.

The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.

If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.

Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().

The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together.

Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com
Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap: correct error handling in mmap_region()

Commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
changed how error handling is performed in mmap_region().

The error value defaults to -ENOMEM, but then gets reassigned immediately
to the result of vms_gather_munmap_vmas() if we are performing a MAP_FIXED
mapping over existing VMAs (and thus unmapping them).

This overwrites the error value, potentially clearing it.

After this, we invoke may_expand_vm() and possibly vm_area_alloc(), and
check to see if they failed. If they do so, then we perform error-handling
logic, but importantly, we do NOT update the error code.

This means that, if vms_gather_munmap_vmas() succeeds, but one of these
calls does not, the function will return indicating no error, but rather an
address value of zero, which is entirely incorrect.

Correct this and avoid future confusion by strictly setting error on each
and every occasion we jump to the error handling logic, and set the error
code immediately prior to doing so.

This way we can see at a glance that the error code is always correct.

Many thanks to Vegard Nossum who spotted this issue in discussion around
this problem.

Link: https://lkml.kernel.org/r/20241002073932.13482-1-lorenzo.stoakes@oracle.com
Fixes: f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/ast: vga: Clear EDID if no display is connected

Do not keep the obsolete EDID around after unplugging the display
from the connector.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 2a2391f857cd ("drm/ast: vga: Transparently handle BMC support")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-3-tzimmermann@suse.de

drm/ast: sil164: Clear EDID if no display is connected

Do not keep the obsolete EDID around after unplugging the display
from the connector.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d20c2f846428 ("drm/ast: sil164: Transparently handle BMC support")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-2-tzimmermann@suse.de

Revert "drm/mgag200: Add vblank support"

This reverts commit 6c9e14ee9f519ee605a3694fbfa4711284781d22.
This reverts commit d5070c9b29440c270b534bbacd636b8fa558e82b.
This reverts commit 89c6ea2006e2d39b125848fb0195c08fa0b354be.

The VLINE interrupt doesn't work correctly on G200SE-A (at least). We
have also seen missing interrupts on G200ER. So revert vblank support.
Fixes frozen displays and warnings about missed vblanks.

[ 33.818362] [CRTC:34:crtc-0] vblank wait timed out

From the vblank code, the driver only keeps the register constants and
the line that disables all interrupts in mgag200_device_init(). Both
is still useful without vblank handling.

Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/dri-devel/Zvx6lSi7oq5xvTZb@agluck-desk3.sc.intel.com/raw
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015063932.8620-1-tzimmermann@suse.de

selftest: hid: add the missing tests directory

Commit 160c826b4dd0 ("selftest: hid: add missing run-hid-tools-tests.sh")
has added the run-hid-tools-tests.sh script for it to be installed, but
I forgot to add the tests directory together.

If running the test case without the tests directory,  will results in
the following error message:

    make -C tools/testing/selftests/ TARGETS=hid install \
    INSTALL_PATH=$KSFT_INSTALL_PATH
    cd $KSFT_INSTALL_PATH
    ./run_kselftest.sh -t hid:hid-core.sh

  /usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown.
  Plugin: helpconfig, Hook: pytest_cmdline_parse
  UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...]
  __main__.py: error: unrecognized arguments: --udevd
    inifile: None
    rootdir: /root/linux/kselftest_install/hid

In fact, the run-hid-tools-tests.sh script uses the scripts in the tests
directory to run tests. The tests directory also needs to be added to be
installed.

Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

clk: test: Fix some memory leaks

CONFIG_CLK_KUNIT_TEST=y, CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the following memory leak occurs.

If the KUNIT_ASSERT_*() fails, the latter (exit() or testcases)
clk_put() or clk_hw_unregister() will fail to release the clk resource
and cause memory leaks, use new clk_hw_register_kunit()
and clk_hw_get_clk_kunit() to automatically release them.

unreferenced object 0xffffff80c6af5000 (size 512):
  comm "kunit_try_catch", pid 371, jiffies 4294896001
  hex dump (first 32 bytes):
    20 4c c0 86 e1 ff ff ff e0 1a c0 86 e1 ff ff ff   L..............
    c0 75 e3 c6 80 ff ff ff 00 00 00 00 00 00 00 00  .u..............
  backtrace (crc 8ca788fa):
    [<00000000e21852d0>] kmemleak_alloc+0x34/0x40
    [<000000009c583f7b>] __kmalloc_cache_noprof+0x26c/0x2f4
    [<00000000d1bc850c>] __clk_register+0x80/0x1ecc
    [<00000000b08c78c5>] clk_hw_register+0xc4/0x110
    [<00000000b16d6df8>] clk_multiple_parents_mux_test_init+0x238/0x288
    [<0000000014a7e804>] kunit_try_run_case+0x10c/0x3ac
    [<0000000026b41f03>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<0000000066619fb8>] kthread+0x2e8/0x374
    [<00000000a1157f53>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c6e37880 (size 96):
  comm "kunit_try_catch", pid 371, jiffies 4294896002
  hex dump (first 32 bytes):
    00 50 af c6 80 ff ff ff 00 00 00 00 00 00 00 00  .P..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc b4b766dd):
    [<00000000e21852d0>] kmemleak_alloc+0x34/0x40
    [<000000009c583f7b>] __kmalloc_cache_noprof+0x26c/0x2f4
    [<0000000086e7dd64>] clk_hw_create_clk.part.0.isra.0+0x58/0x2f4
    [<00000000dcf1ac31>] clk_hw_get_clk+0x8c/0x114
    [<000000006fab5bfa>] clk_test_multiple_parents_mux_set_range_set_parent_get_rate+0x3c/0xa0
    [<00000000c97db55a>] kunit_try_run_case+0x13c/0x3ac
    [<0000000026b41f03>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<0000000066619fb8>] kthread+0x2e8/0x374
    [<00000000a1157f53>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c2b56900 (size 96):
  comm "kunit_try_catch", pid 395, jiffies 4294896107
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 e0 49 c0 86 e1 ff ff ff  .........I......
  backtrace (crc 2e59b327):
    [<00000000e21852d0>] kmemleak_alloc+0x34/0x40
    [<00000000c6c715a8>] __kmalloc_noprof+0x2bc/0x3c0
    [<00000000f04a7951>] __clk_register+0x70c/0x1ecc
    [<00000000b08c78c5>] clk_hw_register+0xc4/0x110
    [<00000000cafa9563>] clk_orphan_transparent_multiple_parent_mux_test_init+0x1a8/0x1dc
    [<0000000014a7e804>] kunit_try_run_case+0x10c/0x3ac
    [<0000000026b41f03>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<0000000066619fb8>] kthread+0x2e8/0x374
    [<00000000a1157f53>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c87c9400 (size 512):
  comm "kunit_try_catch", pid 483, jiffies 4294896907
  hex dump (first 32 bytes):
    a0 44 c0 86 e1 ff ff ff e0 1a c0 86 e1 ff ff ff  .D..............
    20 05 a8 c8 80 ff ff ff 00 00 00 00 00 00 00 00   ...............
  backtrace (crc c25b43fb):
    [<00000000e21852d0>] kmemleak_alloc+0x34/0x40
    [<000000009c583f7b>] __kmalloc_cache_noprof+0x26c/0x2f4
    [<00000000d1bc850c>] __clk_register+0x80/0x1ecc
    [<00000000b08c78c5>] clk_hw_register+0xc4/0x110
    [<000000002688be48>] clk_single_parent_mux_test_init+0x1a0/0x1d4
    [<0000000014a7e804>] kunit_try_run_case+0x10c/0x3ac
    [<0000000026b41f03>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<0000000066619fb8>] kthread+0x2e8/0x374
    [<00000000a1157f53>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c6dd2380 (size 96):
  comm "kunit_try_catch", pid 483, jiffies 4294896908
  hex dump (first 32 bytes):
    00 94 7c c8 80 ff ff ff 00 00 00 00 00 00 00 00  ..|.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 4401212):
    [<00000000e21852d0>] kmemleak_alloc+0x34/0x40
    [<000000009c583f7b>] __kmalloc_cache_noprof+0x26c/0x2f4
    [<0000000086e7dd64>] clk_hw_create_clk.part.0.isra.0+0x58/0x2f4
    [<00000000dcf1ac31>] clk_hw_get_clk+0x8c/0x114
    [<0000000063eb2c90>] clk_test_single_parent_mux_set_range_disjoint_child_last+0x3c/0xa0
    [<00000000c97db55a>] kunit_try_run_case+0x13c/0x3ac
    [<0000000026b41f03>] kunit_generic_run_threadfn_adapter+0x80/0xec
    [<0000000066619fb8>] kthread+0x2e8/0x374
    [<00000000a1157f53>] ret_from_fork+0x10/0x20
......

Fixes: 02cdeace1e1e ("clk: tests: Add tests for single parent mux")
Fixes: 2e9cad1abc71 ("clk: tests: Add some tests for orphan with multiple parents")
Fixes: 433fb8a611ca ("clk: tests: Add missing test case for ranges")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20241016022658.2131826-1-ruanjinjie@huawei.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Several miscellaneous fixes. A lot of bnxt_re activity, there will be
  more rc patches there coming.

   - Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref,
     soft lockups, error unwinding and some small functional issues

   - Error unwind bug in rdma netlink

   - Two issues with incorrect VLAN detection for iWarp

   - skb_splice_from_iter() splat in siw

   - Give SRP slab caches unique names to resolve the merge window
     WARN_ON regression"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/bnxt_re: Fix the GID table length
  RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages
  RDMA/bnxt_re: Change the sequence of updating the CQ toggle value
  RDMA/bnxt_re: Fix an error path in bnxt_re_add_device
  RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
  RDMA/bnxt_re: Fix a possible NULL pointer dereference
  RDMA/bnxt_re: Return more meaningful error
  RDMA/bnxt_re: Fix incorrect dereference of srq in async event
  RDMA/bnxt_re: Fix out of bound check
  RDMA/bnxt_re: Fix the max CQ WQEs for older adapters
  RDMA/srpt: Make slab cache names unique
  RDMA/irdma: Fix misspelling of "accept*"
  RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP
  RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
  RDMA/core: Fix ENODEV error for iWARP test over vlan
  RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event
  RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode
  RDMA/bnxt_re: Add a check for memory allocation
  RDMA/bnxt_re: Fix incorrect AVID type in WQE structure
  RDMA/bnxt_re: Fix a possible memory leak

powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H

Add ArrowLake-H to the list of processors where PL4 is supported.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20241016154851.1293654-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite./linux/kernel/git/superm1/linux

Merge an amd-pstate driver fix for 6.12-rc4 from Mario Limonciello:

"Fix a regression introduced where boost control malfunctioned in
amd-pstate"

* tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled

drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs

This uses more aggressive hueristics than the the bootup default
profile. On windows the OS has a special fullscreen 3D mode
where this is used. Since we don't have the equivalent on Linux
default to this profile for dGPUs.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1500
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 336568de918e08c825b3b1cbe2ec809f2fc26d94)

Merge tag 'for-6.12-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- regression fix: dirty extents tracked in xarray for qgroups must be
   adjusted for 32bit platforms

- fix potentially freeing uninitialized name in fscrypt structure

- fix warning about unneeded variable in a send callback

* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix uninitialized pointer free on read_alloc_one_name() error
  btrfs: send: cleanup unneeded return variable in changed_verity()
  btrfs: fix uninitialized pointer free in add_inode_ref()
  btrfs: use sector numbers as keys for the dirty extents xarray

Merge tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

- fix race between session setup and session logoff

- add supplementary group support

* tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for supplementary groups
ksmbd: fix user-after-free from session log off

Merge tag 'v6.12-p3' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- Remove bogus testmgr ENOENT error messages

- Ensure algorithm is still alive before marking it as tested

- Disable buggy hash algorithms in marvell/cesa

* tag 'v6.12-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: marvell/cesa - Disable hash algorithms
  crypto: testmgr - Hide ENOENT errors better
  crypto: api - Fix liveliness check in crypto_alg_tested

ublk: don't allow user copy for unprivileged device

UBLK_F_USER_COPY requires userspace to call write() on ublk char
device for filling request buffer, and unprivileged device can't
be trusted.

So don't allow user copy for unprivileged device.

Cc: stable@vger.kernel.org
Fixes: 1172d5b8beca ("ublk: support user copy")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241016134847.2911721-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater

On display ver 20 onwards tile4 is not supported with horizontal flip

Bspec: 69853

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007182841.2104740-1-juhapekka.heikkila@gmail.com
(cherry picked from commit 73e8e2f9a358caa005ed6e52dcb7fa2bca59d132)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/bmg: improve cache flushing behaviour

The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled
on for manual global invalidation to take effect and actually flush
device cache, however this also turns on flushing for things like
pipecontrol, which occurs between submissions for compute/render. This
sounds like massive overkill for our needs, where we already have the
manual flushing on the display side with the global invalidation. Some
observations on BMG:

1. Disabling l2 caching for host writes and stubbing out the driver
   global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has
   no impact on wb-transient-vs-display IGT, which makes sense since the
   pipecontrol is now flushing the device cache after the render copy.
   Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also
   expected since device cache is now dirty and display engine can't see
   the writes.

2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global
   invalidation also has no impact on wb-transient-vs-display. This
   suggests that the global invalidation still works as expected and is
   flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on.

With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since
we no longer flush the device cache between submissions as part of
pipecontrol.

Edit: We now also have clarification from HW side that BSpec was indeed
wrong here.

v2:
  - Rebase and update commit message.

BSpec: 71718
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vitasta Wattal <vitasta.wattal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
(cherry picked from commit 67ec9f87bd6c57db1251bb2244d242f7ca5a0b6a)
[ Fix conflict due to changed xe_mmio_write32() signature ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/xe_sync: initialise ufence.signalled

We can incorrectly think that the fence has signalled, if we get a
non-zero value here from the kmalloc, which is quite plausible. Just use
kzalloc to prevent stuff like this.

Fixes: 977e5b82e090 ("drm/xe: Expose user fence from xe_sync_entry")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011133633.388008-2-matthew.auld@intel.com
(cherry picked from commit 26f69e88dcc95fffc62ed2aea30ad7b1fdf31fdb)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/ufence: ufence can be signaled right after wait_woken

do_comapre() can return success after a timedout wait_woken() which was
treated as -ETIME. The loop calling wait_woken() sets correct err so
there is no need to re-evaluate err.

v2: Remove entire check that reevaluate err at the end(Matt)

Fixes: e670f0b4ef24 ("drm/xe/uapi: Return correct error code for xe_wait_user_fence_ioctl")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1630
Cc: stable@vger.kernel.org # v6.8+
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011151029.4160630-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit ec7e6a1d527755fc3c7a3303eaa5577aac5cf6be)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: Use bookkeep slots for external BO's in exec IOCTL

Fix external BO's dma-resv usage in exec IOCTL using bookkeep slots
rather than write slots. This leaves syncing to user space rather than
the KMD blindly enforcing write semantics on every external BO.

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Kenneth Graunke <kenneth.w.graunke@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2673
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911152622.903058-1-matthew.brost@intel.com
(cherry picked from commit b8b1163248759ba18509f7443a2d19b15b4c1df8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/query: Increase timestamp width

Starting with Xe2 the timestamp is a full 64 bit counter, contrary to
the 36 bit that was available before. Although 36 should be sufficient
for any reasonable delta calculation (for Xe2, of about 30min), it's
surprising to userspace to get something truncated. Also if the
timestamp being compared to is coming from the GPU and the application
is not careful enough to apply the width there, a delta calculation
would be wrong.

Extend it to full 64-bits starting with Xe2.

v2: Expand width=64 to media gt, as it's just a wrong tagging in the
spec - empirical tests show it goes beyond 36 bits and match the engines
for the main gt

Bspec: 60411
Cc: Szymon Morek <szymon.morek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011035618.1057602-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 9d559cdcb21f42188d4c3ff3b4fe42b240f4af5d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: Don't free job in TDR

Freeing job in TDR is not safe as TDR can pass the run_job thread
resulting in UAF. It is only safe for free job to naturally be called by
the scheduler. Rather free job in TDR, add to pending list.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2811
Cc: Matthew Auld <matthew.auld@intel.com>
Fixes: e275d61c5f3f ("drm/xe/guc: Handle timing out of signaled jobs gracefully")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003001657.3517883-3-matthew.brost@intel.com
(cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: Take job list lock in xe_sched_add_pending_job

A fragile micro optimization in xe_sched_add_pending_job relied on both
the GPU scheduler being stopped and fence signaling stopped to safely
add a job to the pending list without the job list lock in
xe_sched_add_pending_job. Remove this optimization and just take the job
list lock.

Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003001657.3517883-2-matthew.brost@intel.com
(cherry picked from commit 90521df5fc43980e4575bd8c5b1cb62afe1a9f5f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: fix unbalanced rpm put() with declare_wedged()

Technically the or_reset() means we call the action on failure, however
that would lead to unbalanced rpm put(). Move the get() earlier to fix
this. It should be extremely unlikely to ever trigger this in practice.

Fixes: 90936a0a4c54 ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
(cherry picked from commit a187c1b0a800565a4db6372268692aff99df7f53)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: fix unbalanced rpm put() with fence_fini()

Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.

There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.

v2 (Matt B):
- Prefer warning if we detect double fini()

Fixes: f002702290fc ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
(cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg

Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD.

Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04.
This wa is type: permanent, and hence is applicable on all steppings.

Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
(cherry picked from commit 8fb1da9f9bfb02f710a7f826d50781b0b030cf53)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race

We're seeing crashes from rq_qos_wake_function that look like this:

  BUG: unable to handle page fault for address: ffffafe180a40084
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
  Oops: Oops: 0002 [#1] PREEMPT SMP PTI
  CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
  RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
  Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
  RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
  RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
  R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
  R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
  FS:  0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   <IRQ>
   try_to_wake_up+0x5a/0x6a0
   rq_qos_wake_function+0x71/0x80
   __wake_up_common+0x75/0xa0
   __wake_up+0x36/0x60
   scale_up.part.0+0x50/0x110
   wb_timer_fn+0x227/0x450
   ...

So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).

p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.

What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:

rq_qos_wait()                           rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
                                        data->got_token = true;
                                        list_del_init(&curr->entry);
if (data.got_token)
        break;
finish_wait(&rqw->wait, &data.wq);
  ^- returns immediately because
     list_empty_careful(&wq_entry->entry)
     is true
... return, go do something else ...
                                        wake_up_process(data->task)
                                          (NO LONGER VALID!)-^

Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.

The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.

Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().

Fixes: 38cfb5a45ee0 ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/rsrc: ignore dummy_ubuf for buffer cloning

For placeholder buffers, &dummy_ubuf is assigned which is a static
value. When buffers are attempted cloned, don't attempt to grab a
reference to it, as we both don't need it and it'll actively fail as
dummy_ubuf doesn't have a valid reference count setup.

Link: https://lore.kernel.org/io-uring/Zw8dkUzsxQ5LgAJL@ly-workstation/
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Fixes: 7cc2a6eadcd7 ("io_uring: add IORING_REGISTER_COPY_BUFFERS method")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode

If an MST branch device doesn't support DSC for a given mode, but the
MST link has enough BW for the mode, assume that the branch device does
support the mode using an uncompressed stream.

Fixes: 55eaef164174 ("drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirk")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-2-imre.deak@intel.com
(cherry picked from commit 4e75c3e208a06ad6fd9b3517fb77337460d7c2b0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation

The MST branch device may not support the number of DSC slices a mode
requires, handle the error in this case.

Fixes: 4e0837a8d00a ("drm/i915/dp_mst: Account for FEC and DSC overhead during BW allocation")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-1-imre.deak@intel.com
(cherry picked from commit 802a69b6b8a0502a9e2309afec7e1b77f67874f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>