Arnd Bergmann [Tue, 13 Sep 2016 15:36:04 +0000 (17:36 +0200)]
Merge tag 'sunxi-dt-for-4.9' of https://git./linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT changes for 4.9" from Maxime Ripard:
Business as usual on our side, with a mix of new boards and new IPs enabled
on boards:
- Support for the GPIO found on the AXP PMIC
- ESP8089 on the relevant boards
- More boards converted to the reference design and q8 designs
- New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
Nano Pi Neo
* tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (31 commits)
devicetree: Add vendor prefix for FriendlyARM
ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
ARM: dts: sun8i: Add PWM controller node in H3
ARM: dts: sun8i: Add dts file for inet-d978_rev2 tablets
ARM: dts: sun9i: Add missing #interrupt-cells to R_PIO pinctrl device node
ARM: dts: sun8i: Rename reference-design-tablet touchscreen node
ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tablet
ARM: dts: sun5i: Convert inet-98v-rev2 dts to use reference-design-tablet.dtsi
ARM: dts: sun4i: Disable ohci1 on ba10-tv-box
ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2809
ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2407
ARM: dts: sun8i: add NAND controller node for A23/A33
ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB
ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node
ARM: dts: sun9i: Switch to the AC100 RTC clock outputs for osc32k
ARM: dts: sun9i: cubieboard4: Add device node for AC100
...
Arnd Bergmann [Tue, 13 Sep 2016 15:34:49 +0000 (17:34 +0200)]
Merge tag 'renesas-dt2-for-v4.9' of git://git./linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman:
Fixes (for v4.9):
* Correct PWM clock parent on r8a7794 SoC
Clean-up:
* Remove obsolete vsp1 properties from r8a779[01] SoCs
New boards:
* Add r8a7792/wheat and r7s72100/rskrza1 boards
Enablement:
* Enable LEDs, DU, SDHI on r8a7792/blanche board
* Enable MMCIF and SDHI on r8a7794/alt board
* Add SPI and VSP1 to r8a7792 SoC
* Add ethernet to r7s72100 SoC
* tag 'renesas-dt2-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
ARM: dts: wheat: add support for tactile switches
ARM: dts: wheat: add QSPI support
ARM: dts: r8a7792: add QSPI support
ARM: dts: r8a7792: add QSPI clock
ARM: dts: wheat: add SDHI0 support
ARM: dts: wheat: add CAN support
ARM: dts: r8a7794: fix PWM clock parent
ARM: dts: rskrza1: add ethernet DT support
ARM: dts: r7s72100: add ethernet to device tree
ARM: dts: r7s72100: add ethernet clock to device tree
ARM: dts: rskrza1: initial device tree
ARM: dts: Add RSKRZA1 DT bindings documentation
ARM: dts: wheat: add Ethernet support
ARM: dts: wheat: initial device tree
ARM: dts: document Wheat board
ARM: dts: blanche: add support for general purpose LEDs
ARM: dts: r8a7792: add VSP1V support
ARM: dts: r8a7792: add VSP1V clocks
ARM: dts: blanche: add DU support
ARM: dts: blanche: add SDHI0 support
...
Arnd Bergmann [Tue, 13 Sep 2016 15:32:51 +0000 (17:32 +0200)]
Merge tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc into next/dt
Pull "Device Tree clean up for LPC18xx platform" from Joachim Eastwood:
* Removal of skeleton.dtsi from the common armv7-m dtsi together
with lpc18xx and efm32 platforms.
* Fix for unit address warnings from the dtc on lpc18xx/efm32.
That is made possible with skeleton.dtsi gone.
* tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc:
ARM: dts: efm32: remove skeleton.dtsi include and fix unit address warnings
ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings
ARM: dts: armv7-m: remove skeleton.dtsi include
Arnd Bergmann [Tue, 13 Sep 2016 15:31:16 +0000 (17:31 +0200)]
Merge tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.9 (part 1)" from Gregory CLEMENT:
- update for Armada XP/38x allowing using direct access SPI
- various improvement for Armada 39x platforms
- add pinctrl information for NANd on Armada 38x
- fix the kirkwood based Openblock A6 external GPIO pins
* tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: fix reference to a390 spi controller
ARM: dts: armada-38x: Add NAND pinctrl information
ARM: dts: kirkwood: Fix Openblock A6 external GPIO pins
ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board
ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board
ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs
ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric
ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
ARM: dts: mvebu: a385-db-ap: add default partition description for NAND
ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
ARM: dts: mvebu: armada-370-xp: Add MBus mappings for all SPI devices
ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node
ARM: dts: mvebu: Add SPI1 pinctrl defines for Armada XP
Arnd Bergmann [Tue, 13 Sep 2016 15:29:08 +0000 (17:29 +0200)]
Merge tag 'qcom-dts-for-4.9' of git://git./linux/kernel/git/agross/linux into next/dt
Pull "Qualcomm Device Tree Changes for v4.9" from Andy Gross:
* Rework dr_mode on APQ8064 and Nexus7
* Add MSM8974 BLSP1 UART1 port
* Add AP148 SATA mapping
* Add support for LG Nexus 5 (Hammerhead)
* Fixup MSM8660/MSM8064 SPMI/MPP IRQs
* Add Nexus7 IMEM/reboot reason
* Add Honami touchscreen support
* Add TSENS support on MSM8974, APQ8064, and APQ8084
* Add APQ8060 Dragonboard PM8058 LEDs
* Rework VPH PWR REG for MSM8974
* tag 'qcom-dts-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
ARM: dts: msm8974: honami: Add touchscreen
device-tree: nexus7: Add IMEM syscon and reboot reason support
ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs
ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
ipq8064: dts: force AP148 SATA port mapping
ARM: dts: msm8974: Add nodes for blsp1_uart1 serial port
device-tree: aqp8064.dtsi: Remove usb phy dr_mode = "host"
device-tree: nexus7: Set phy mode to otg instead of host
Mark Rutland [Fri, 2 Sep 2016 16:34:50 +0000 (17:34 +0100)]
ARM: dts: explicitly mark skeleton.dtsi as deprecated
As noted in commit
3ebee5a2e141496b ("arm64: dts: kill skeleton.dtsi"),
there are a number of problems with skeleton.dtsi, and it would be
prefereable to remove it entirely. As there are a large number of
existing users, fixing these up will take a while.
This patch adds a note to arm's skeleton.dtsi noting that this is the
case, to make this more obvious and hopefully minimize new uptake of
skeleton.dtsi in the mean time.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 13 Sep 2016 15:24:24 +0000 (17:24 +0200)]
Merge tag 'sti-dt-for-v4.9-1' of git://git./linux/kernel/git/pchotard/sti into next/dt
Pull "STi dts fixes and new STi 96board support" from Patrice Chotard:
Add thermal node for STiH407 family boards
Add specific nodes for STMicroelectronics 96Board
Add new B2260 STi board file = 96Board
Fix ahci issue on STiH407 family
Fix debugfs/pinctrl kernel warning
Update gpio-cells and gpio specifier
* tag 'sti-dt-for-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH41x-b2020: Update gpio specifier
ARM: dts: STiH418-B2199: Update gpio specifier
ARM: dts: STiH407-pinctrl: Update gpio-cells to 2
ARM: dts: STi: Introduce B2260 board
ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
ARM: dts: STiH407-pinctrl: Add pinctrl_rgmii1_mdio_1 node
ARM: dts: STiH407: Move non-removable property to board file
ARM: dts: STiH407-pinctrl: Add i2c2_alt2_1 node
ARM: dts: STiH410: Add thermal node
ARM: dts: STiH407: Move pio20 node to fix kernel warning
Arnd Bergmann [Tue, 13 Sep 2016 14:27:42 +0000 (16:27 +0200)]
Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren:
- Update elm phandle for am335x
- Fix overo NAND gpmc ranges, this has always been broken so it can
wait for the merge window
- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
as it's been using the older configration since the dts got added
- A series of dtc warning fixes for unit names
- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards
- Disable DDR regulator during rtc-only/poweroff mode for am437x boards
- Remove redundant regulator compatibles for am437x boards
- Increas QSPI max frequency for dra7 boards
- Enable QSPI for am57xx-idk-common
- Enable am335x-wega audio support
- Workaround for i845 for dra7
- Update binding for logicpd boards
- Add gpio-decoder nodes for am335x-icev2 board
- Add linux,pci-domain property for dra7
- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
entries, these can wait for merge window as Ethernet works on dra7
- A series of changes to drop skeleton.dtsi because of dtc warnings
* tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits)
ARM: dts: dra7: Add missing unit name to memory nodes
ARM: dts: dra62x: Add missing unit name to memory nodes
ARM: dts: dm8168: Add missing unit name to memory nodes
ARM: dts: dm8148: Add missing unit name to memory nodes
ARM: dts: am572x: Add missing unit name to memory nodes
ARM: dts: am4372: Add missing unit name to memory nodes
ARM: dts: am3517: Add missing unit name to memory nodes
ARM: dts: am335x: Add missing unit name to memory nodes
ARM: dts: omap5: Add missing unit name to memory nodes
ARM: dts: omap4: Add missing unit name to memory nodes
ARM: dts: omap3: Add missing unit name to memory nodes
ARM: dts: omap2: Add missing unit name to memory nodes
ARM: dts: am4372: Remove skeleton.dtsi usage
ARM: dts: dra7: Remove skeleton.dtsi usage
ARM: dts: dm816x: Remove skeleton.dtsi usage
ARM: dts: dm814x: Remove skeleton.dtsi usage
ARM: dts: am33xx: Remove skeleton.dtsi usage
ARM: dts: omap5: Remove skeleton.dtsi usage
ARM: dts: omap4: Remove skeleton.dtsi usage
ARM: dts: omap3: Remove skeleton.dtsi usage
...
Arnd Bergmann [Tue, 13 Sep 2016 14:21:02 +0000 (16:21 +0200)]
Merge tag 'keystone_dts_for_4.9' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: dts: Keystone DTS for 4.9" from Santosh Shilimkar
Add K2G nodes for GPIO, IRQ and Message Manager
* tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2g: Add Message Manager node
ARM: dts: keystone-k2g: Add DSP GPIO controller node
ARM: dts: keystone-k2g: Add keystone IRQ controller node
ARM: dts: keystone-k2g: Add device state controller node
ARM: dts: keystone: specify usb mode explicitly
Arnd Bergmann [Tue, 13 Sep 2016 14:11:51 +0000 (16:11 +0200)]
Merge tag 'uniphier-dt-v4.9' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
Merge "UniPhier ARM SoC DT updates for v4.9" from Masahiro Yamada:
* Match DT names other projects and documents
* Switch over to PSCI
* Use clock/reset drivers
* Misc
* tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add specific compatible to SoC-Glue node
ARM: dts: uniphier: use clock/reset controllers
ARM: dts: uniphier: switch over to PSCI
ARM: dts: uniphier: match DT names to other projects and documents
ARM: dts: uniphier: remove a whitespace after tabs
Arnd Bergmann [Tue, 13 Sep 2016 14:09:10 +0000 (16:09 +0200)]
Merge tag 'samsung-dt-4.9' of git://git./linux/kernel/git/krzk/linux into next/dt
Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:
1. Set chosen serial bitrate which allows proper serial output when
bootloader does pass all the data in command line.
2. Cleanup.
* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
Arnd Bergmann [Tue, 13 Sep 2016 14:06:41 +0000 (16:06 +0200)]
Merge tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc into next/dt
Merge "Device Tree additions for LPC18xx platform" from Joachim Eastwood:
Small fix for the compatible string for the NXP SE97 I2C chip on the
Hitex Eval board from Guenter and a couple of additional DT properties
for the DWMAC that is need for correct operation.
* tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc:
ARM: dts: lpc18xx: configure dwmac properly
ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device
Lars Persson [Tue, 23 Aug 2016 14:00:52 +0000 (16:00 +0200)]
ARM: dts: artpec: set irq affinity on pmu interrupts
The irq affinity is required for pmu interrupts.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lars Persson [Tue, 23 Aug 2016 14:00:51 +0000 (16:00 +0200)]
ARM: dts: artpec: use optimized pl310 settings
Use the cache settings that were determined to give best performance
on artpec-6 typical workloads.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lars Persson [Tue, 23 Aug 2016 14:00:50 +0000 (16:00 +0200)]
ARM: dts: artpec: use clock binding header
Use defines from the clock binding header as clock indexes.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 13 Sep 2016 14:01:12 +0000 (16:01 +0200)]
Merge tag 'renesas-dt-for-v4.9' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman:
* Add DU, VIN, I2C, SDHI, EtherAVB, GPIO support to r8a7792
* Enable CAN0 on r8a7792/blanche
* Enable sound on r8a7794/silk
* Correct SDHI register size on r8a7794
* tag 'renesas-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
ARM: dts: r8a7792: add DU support
ARM: dts: r8a7792: add DU clocks
ARM: dts: r8a7792: fix misindented line
ARM: dts: silk: add sound support
ARM: dts: r8a7794: add sound support
ARM: dts: r8a7794: add Audio-DMAC support
ARM: dts: r8a7794: add MSTP10 clocks
ARM: dts: r8a7794: add MSTP5 clocks
ARM: dts: r8a7794: add audio clocks
ARM: dts: r8a7792: add VIN support
ARM: dts: r8a7792: add VIN clocks
ARM: dts: r8a7792: add I2C support
ARM: dts: r8a7792: add I2C clocks
ARM: dts: r8a7792: add SDHI support
ARM: dts: r8a7792: add SD clocks
ARM: dts: r8a7794: Correct SDHI register size
ARM: dts: blanche: add CAN0 support
ARM: dts: r8a7792: add CAN support
ARM: dts: r8a7792: add CAN clocks
ARM: dts: r8a7792: add EtherAVB support
...
Sergei Shtylyov [Mon, 5 Sep 2016 21:33:05 +0000 (00:33 +0300)]
ARM: dts: wheat: add support for tactile switches
Add support for the tactile switches SW2/3 (on the debug board) as a
virtual keyboard like it was done with the Blanche board).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 2 Sep 2016 22:09:26 +0000 (01:09 +0300)]
ARM: dts: wheat: add QSPI support
Define the Wheat board dependent part of the QSPI device node.
Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Joachim Eastwood [Mon, 29 Aug 2016 21:58:29 +0000 (23:58 +0200)]
ARM: dts: efm32: remove skeleton.dtsi include and fix unit address warnings
Removale of skeleton.dtsi allows us also to fix the following
warning from the dts compiler:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
by adding proper unit addresses to the memory nodes. Also add missing
device_type to the memory node while at it.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Joachim Eastwood [Mon, 29 Aug 2016 21:37:24 +0000 (23:37 +0200)]
ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings
Removale of skeleton.dtsi allows us also to fix the following
warning from the dts compiler:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
by adding proper unit addresses to the memory nodes.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Joachim Eastwood [Mon, 29 Aug 2016 21:33:56 +0000 (23:33 +0200)]
ARM: dts: armv7-m: remove skeleton.dtsi include
Remove skeleton.dtsi from the common ARM Cortex-M dtsi. This will allow
us to remove skeleton.dtsi on a per platform basis and get rid of the
unit address warning on the memory nodes without getting duplicate memory
nodes.
See
3ebee5a2e141 ("arm64: dts: kill skeleton.dtsi") for additional
reasons not to use the skeleton.dtsi.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
James Pettigrew [Mon, 5 Sep 2016 22:15:57 +0000 (08:15 +1000)]
devicetree: Add vendor prefix for FriendlyARM
Guangzhou FriendlyARM Computer Tech Co., Ltd is a Chinese ARM board vendor.
Signed-off-by: James Pettigrew <james@innovum.com.au>
Reviewed-by: Rask Ingemann Lambertsen <ccc94453@vip.cybercity.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
James Pettigrew [Mon, 5 Sep 2016 22:15:56 +0000 (08:15 +1000)]
ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a
micro SD slot, 10/100Mbit ethernet and a single USB-A port.
Signed-off-by: James Pettigrew <james@innovum.com.au>
Reviewed-by: Rask Ingemann Lambertsen <ccc94453@vip.cybercity.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 26 Aug 2016 14:52:36 +0000 (16:52 +0200)]
ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
Most of the sun8i q8 boards have an SDIO wifi controller, on the
variants which use an USB wifi controller, this will result in a
couple of error msg-s in dmesg when proving the sdio bus and
an used mmc controller.
The best way to deal with wifi on this boards really is to simply
let the kernel auto-detect usb or sdio wifi controllers, so we
will just have to live with the few errors in dmesg.
This has been tested on a23 based q8 tablets with ESP8089, RTL8703AS and
RTL8189FTV wifi controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Sergei Shtylyov [Fri, 2 Sep 2016 22:08:45 +0000 (01:08 +0300)]
ARM: dts: r8a7792: add QSPI support
Define the generic R8A7792 part of the QSPI device node.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 2 Sep 2016 22:07:28 +0000 (01:07 +0300)]
ARM: dts: r8a7792: add QSPI clock
Describe the QSPI clock in the R8A7792 device tree.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 30 Aug 2016 22:24:41 +0000 (01:24 +0300)]
ARM: dts: wheat: add SDHI0 support
Define the Wheat board dependent part of the SDHI0 (connected to the
micro-SD slot) device node along with the necessary voltage regulator.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Mon, 29 Aug 2016 20:11:26 +0000 (23:11 +0300)]
ARM: dts: wheat: add CAN support
Define the Wheat board dependent part of the CAN0/1 device nodes...
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Sun, 4 Sep 2016 19:55:37 +0000 (22:55 +0300)]
ARM: dts: r8a7794: fix PWM clock parent
When removing the non-existing thermal clock I forgot to remove its
parent from the node's "clocks" property -- this led to a wrong PWM
clock's parent clock.
Fixes:
2a29f9d6fea8 ("ARM: dts: r8a7794: add MSTP5 clocks")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Fri, 2 Sep 2016 01:40:12 +0000 (21:40 -0400)]
ARM: dts: rskrza1: add ethernet DT support
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Fri, 2 Sep 2016 01:40:11 +0000 (21:40 -0400)]
ARM: dts: r7s72100: add ethernet to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Fri, 2 Sep 2016 01:40:10 +0000 (21:40 -0400)]
ARM: dts: r7s72100: add ethernet clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Mon, 29 Aug 2016 18:13:22 +0000 (14:13 -0400)]
ARM: dts: rskrza1: initial device tree
Add the initial device tree for the RZ/A1 based development board (RSK).
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Mon, 29 Aug 2016 18:14:29 +0000 (14:14 -0400)]
ARM: dts: Add RSKRZA1 DT bindings documentation
Add RSKRZA1 Device tree bindings Documentation, listing it as a supported
board.
This allows to use checkpatch to validate DTSes referring to the RSKRZA1
board.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Aug 2016 20:23:13 +0000 (23:23 +0300)]
ARM: dts: wheat: add Ethernet support
R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet
chip was used instead on the Wheat debug board; this chip is compatible
with SMSC LAN9115 for which there's a (device tree aware) driver.
Describe the chip in the Wheat device tree unconditionally (the driver
should fail the probe if the debug board isn't connected); enable DHCP and
NFS root in the command line for the kernel boot...
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Aug 2016 20:21:42 +0000 (23:21 +0300)]
ARM: dts: wheat: initial device tree
Add the initial device tree for the R8A7792 SoC based Wheat board.
The Wheat board itself has no serial ports wired up, the USB serial chips
are situated on a separate debug board and one of them is connected to
SCFI0 -- include unconditional support for it, so that the serial console
can work.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Aug 2016 20:20:05 +0000 (23:20 +0300)]
ARM: dts: document Wheat board
Document the Wheat device tree bindings, listing it as a supported board.
This allows to use checkpatch.pl to validate .dts files referring to the
Wheat board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hans de Goede [Sat, 3 Sep 2016 11:05:18 +0000 (13:05 +0200)]
ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus,
with 2G RAM and an external gbit ethernet phy.
Note currently the dts is pretty much empty (except for including the
pc-plus dts), I've a local patch which enables the emac actually making
this dts different from the pc-plus one, but that needs the h3 emac
driver to get merged first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sat, 3 Sep 2016 11:05:17 +0000 (13:05 +0200)]
ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
Update the sun8i-h3-orangepi-plus.dts model string to reflect that it
is valid for both the Orange Pi Plus and the Orange Pi Plus 2.
This is also meant to help users realize that it is not valid for
the new Orange Pi Plus 2E, which will get its own dts.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Bhushan Shah [Fri, 29 Jul 2016 06:09:07 +0000 (11:39 +0530)]
ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
vreg_boost is Qualcomm platform specific and is also used in hammerhead
device.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bhushan Shah [Fri, 29 Jul 2016 06:09:08 +0000 (11:39 +0530)]
ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Linus Walleij [Fri, 19 Aug 2016 08:46:47 +0000 (10:46 +0200)]
ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard
This adds the PM8058 LEDs as used in the platform.
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rajendra Nayak [Wed, 17 Aug 2016 05:18:46 +0000 (10:48 +0530)]
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
Add thermal zones, tsens and qfprom nodes
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rajendra Nayak [Wed, 17 Aug 2016 05:18:45 +0000 (10:48 +0530)]
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
TSENS is part of GCC, hence add TSENS properties as part of GCC node.
Also add thermal zones and qfprom nodes.
Update GCC bindings doc to mention the possibility of optional TSENS
properties that can be part of GCC node.
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rajendra Nayak [Wed, 17 Aug 2016 05:18:44 +0000 (10:48 +0530)]
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
Add thermal zones, tsens and qfprom nodes
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Tue, 16 Aug 2016 17:46:30 +0000 (10:46 -0700)]
ARM: dts: msm8974: honami: Add touchscreen
Add the i2c2 and rmi4 nodes to enable the Synaptics touchscreen found in
the Honami.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Patrice Chotard [Wed, 10 Aug 2016 13:13:00 +0000 (15:13 +0200)]
ARM: dts: STiH41x-b2020: Update gpio specifier
- Remove useless gpio-cells
- Update second parameter by using GPIO_ACTIVE_HIGH/LOW
instead of hardcoded value
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Patrice Chotard [Wed, 10 Aug 2016 13:13:00 +0000 (15:13 +0200)]
ARM: dts: STiH418-B2199: Update gpio specifier
- Remove useless gpio-cells
- Update second parameter by using GPIO_ACTIVE_HIGH/LOW
instead of hardcoded value
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Patrice Chotard [Wed, 10 Aug 2016 13:12:00 +0000 (15:12 +0200)]
ARM: dts: STiH407-pinctrl: Update gpio-cells to 2
This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STi: Introduce B2260 board
B2260 board is the STMicroelectronics 96Board
based on STiH410 soc :
- 1GB DDR
- On-Board USB combo WiFi/Bluetooth RTL8723BU
with PCB soldered antenna
- Ethernet 1000-BaseT
- Sata
- HDMI
- 2 x USB2 type A
- micro USB2 type AB
- SD card slot
- High speed connector (SD/I2C/USB interfaces)
- Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
Despite ST AHCI version = 1.3, reading HOST_PORTS_IMPL
returns 0. So force HOST_PORTS_IMPL to 1 by using
ports-implemented DT property.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH407-pinctrl: Add pinctrl_rgmii1_mdio_1 node
On 96board, we can't reuse rgmii1-mdio as the pin pio1 3
( mdint ) is dedicated for user led green 1. So create
rgmii1_mdio_1 for 96board on which only mdio and mdc pins
are useful.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH407: Move non-removable property to board file
Due to 96board which uses mmc0 node for SD card, the non-removable
property must be moved from STiH407-family to board file for B2120
and B2199 boards.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH407-pinctrl: Add i2c2_alt2_1 node
Add missing pin muxing for I2C2 alternate 2. This
i2c2 pin muxing is dedicated for 96board high speed
expansion connector.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
[Lee: Correct spacing between nodes]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH410: Add thermal node
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
[Lee: Changed node name and added the unit address]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Patrice Chotard [Mon, 15 Aug 2016 12:17:00 +0000 (14:17 +0200)]
ARM: dts: STiH407: Move pio20 node to fix kernel warning
cat /sys/kernel/debug/pinctrl/
921f080.pin-controller-front1/pingroups
leads to the kernel warning:
[ 86.083560] st-pinctrl
921f080.pin-controller-front1: failed to get pin(-517) name
[ 86.091192] ------------[ cut here ]------------
[ 86.095897] WARNING: CPU: 0 PID: 1579 at drivers/pinctrl/core.c:1414 pinctrl_groups_show+0x144/0x16c
[ 86.105072] Modules linked in:
[ 86.108127] CPU: 0 PID: 1579 Comm: cat Tainted: G W
4.6.0-00011-g9ba82e2-dirty #5
[ 86.116728] Hardware name: STiH415/416 SoC with Flattened Device Tree
[ 86.123194] [<
c010fa90>] (unwind_backtrace) from [<
c010bea8>] (show_stack+0x10/0x14)
[ 86.130943] [<
c010bea8>] (show_stack) from [<
c038c5b0>] (dump_stack+0x98/0xac)
[ 86.138167] [<
c038c5b0>] (dump_stack) from [<
c0129b58>] (__warn+0xe8/0x100)
[ 86.145121] [<
c0129b58>] (__warn) from [<
c0129c20>] (warn_slowpath_null+0x20/0x28)
[ 86.152681] [<
c0129c20>] (warn_slowpath_null) from [<
c03bf810>] (pinctrl_groups_show+0x144/0x16c)
[ 86.161550] [<
c03bf810>] (pinctrl_groups_show) from [<
c0218a5c>] (seq_read+0x1ec/0x4c0)
[ 86.169553] [<
c0218a5c>] (seq_read) from [<
c01f66f0>] (__vfs_read+0x20/0xd0)
[ 86.176592] [<
c01f66f0>] (__vfs_read) from [<
c01f7414>] (vfs_read+0x7c/0x104)
[ 86.183716] [<
c01f7414>] (vfs_read) from [<
c01f81a0>] (SyS_read+0x44/0x9c)
[ 86.190585] [<
c01f81a0>] (SyS_read) from [<
c0108400>] (ret_fast_syscall+0x0/0x3c)
[ 86.198158] ---[ end trace
1aa2e3ae820eeb3e ]---
Move the pincontroller pio20 node above the tsin4 node, which referred
to it, fix this warning.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Nishanth Menon [Wed, 31 Aug 2016 20:32:04 +0000 (16:32 -0400)]
ARM: dts: keystone-k2g: Add Message Manager node
Introduce the message manager node for the A15 queues on which Linux
runs. The Message Manager is primarily used for communication with
Power Management controller on K2G.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Andrew F. Davis [Wed, 31 Aug 2016 20:29:59 +0000 (16:29 -0400)]
ARM: dts: keystone-k2g: Add DSP GPIO controller node
Add the DSP GPIO controller node on K2G SoC.
This is used to send interrupts to the only DSP processor
subsystem present on the SoC. The IP is identical to that
of the equivalent nodes on existing K2 SoCs.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Andrew F. Davis [Wed, 31 Aug 2016 20:29:59 +0000 (16:29 -0400)]
ARM: dts: keystone-k2g: Add keystone IRQ controller node
Add the Keystone IRQ controller IP node on K2G SoC. This allows the
ARM CorePac core to receive interrupts from remote processor devices
(eg: DSP) on the SoC.
The IP is identical in functionality to that of the equivalent
nodes on existing K2 SoCs. The only difference is the ARM INTC
interrupt id/event number.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Andrew F. Davis [Wed, 31 Aug 2016 20:29:59 +0000 (16:29 -0400)]
ARM: dts: keystone-k2g: Add device state controller node
Add the device state controller node as a syscon node to the
K2G SoC. This module provides similar device control functionality
as that on the existing K2 SoCs.
One example usage would be the boot address programming of the
DSP processor sub-system.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Grygorii Strashko [Wed, 31 Aug 2016 20:29:59 +0000 (16:29 -0400)]
ARM: dts: keystone: specify usb mode explicitly
The USB OTG mode is not supported by Kestone 2 devices, as result, the
USB devices enumeration and detection will not work properly when
kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi
platform build):
- it's required to load gadget drivers manually to make host mode
work and this confuses current Keystone 2 users
- device mode is not working, because port can't detect and switch to
peripheral/host mode dynamically.
Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2
devices and usb1 = "peripheral" for K2E.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Milo Kim [Wed, 31 Aug 2016 08:25:18 +0000 (17:25 +0900)]
ARM: dts: sun8i: Add PWM controller node in H3
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:37 +0000 (12:35 +0200)]
ARM: dts: dra7: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:36 +0000 (12:35 +0200)]
ARM: dts: dra62x: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:35 +0000 (12:35 +0200)]
ARM: dts: dm8168: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:34 +0000 (12:35 +0200)]
ARM: dts: dm8148: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:33 +0000 (12:35 +0200)]
ARM: dts: am572x: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:32 +0000 (12:35 +0200)]
ARM: dts: am4372: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:31 +0000 (12:35 +0200)]
ARM: dts: am3517: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:30 +0000 (12:35 +0200)]
ARM: dts: am335x: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:29 +0000 (12:35 +0200)]
ARM: dts: omap5: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:28 +0000 (12:35 +0200)]
ARM: dts: omap4: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:27 +0000 (12:35 +0200)]
ARM: dts: omap3: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:26 +0000 (12:35 +0200)]
ARM: dts: omap2: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:25 +0000 (12:35 +0200)]
ARM: dts: am4372: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it shouldn't have
functional changes.
Since no am4372 based board had a memory node defined, a dummy node
is added so the compiled DTB memory node is the same than before.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:24 +0000 (12:35 +0200)]
ARM: dts: dra7: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:23 +0000 (12:35 +0200)]
ARM: dts: dm816x: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:22 +0000 (12:35 +0200)]
ARM: dts: dm814x: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:21 +0000 (12:35 +0200)]
ARM: dts: am33xx: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:20 +0000 (12:35 +0200)]
ARM: dts: omap5: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:19 +0000 (12:35 +0200)]
ARM: dts: omap4: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:18 +0000 (12:35 +0200)]
ARM: dts: omap3: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:17 +0000 (12:35 +0200)]
ARM: dts: omap2: Remove skeleton.dtsi usage
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same besides an empty chosen
node being removed and nodes reordered, so it should not have
functional changes.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:16 +0000 (12:35 +0200)]
ARM: omap3: Add missing memory node in overo and torpedo boards
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
But these boards don't have a memory node defined, so removing the
skeleton.dtsi inclusion from omap3.dtsi will cause a change in the
compiled DTB. Add a dummy memory node so the compiled DTB doesn't
change if the skeleton.dtsi is removed from omap3.dtsi.
Eventually the correct starting addresses and sizes should be used
but I didn't find that information.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Javier Martinez Canillas [Wed, 31 Aug 2016 10:35:15 +0000 (12:35 +0200)]
ARM: am335x: Add missing memory node in sl50 board
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("
3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
But the sl50 board doesn't have a, so removing the skeleton.dtsi
inclusion from am33xx.dtsi will cause a change in the compiled DTB.
The board has 512 MiB of RAM and its starting address is 0x80000000,
so add a proper memory device node in the DTS.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Tue, 30 Aug 2016 14:58:01 +0000 (17:58 +0300)]
ARM: dts: dra7: cpsw: fix clocks tree
Current clocks tree definition for CPSW/CPTS doesn't
correspond TRM for dra7/am57 SoCs.
CPTS: has to be sourced from gmac_rft_clk_mux clock
CPSW: DPLL_GMAC -> CLKOUT_M2 -> GMAC_250M_CLK -> 1/2 ->
-> GMAC_MAIN_CLK (125 MHZ)
Hence, correct clock tree for GMAC_MAIN_CLK and use proper
clock for CPTS. This also require updating of CPTS clock
multiplier.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
J.D. Schroeder [Tue, 30 Aug 2016 14:58:00 +0000 (17:58 +0300)]
ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
This commit fixes the clock data inside the DRA7xx clocks device tree
structure for the gmac_gmii_ref_clk_div clock. This clock is actually
the GMAC_MAIN_CLK and has nothing to do with the register at address
0x4a0093d0. If CLKSEL_REF bit 24 inside of CM_GMAC_GMAC_CLKCTRL, is
set to 1 in order to use the GMAC_RMII_CLK instead of the
GMAC_RMII_HS_CLK, the kernel generates a clock divider warning:
WARNING: CPU: 0 PID: 0 at drivers/clk/clk-divider.c:129 clk_divider_recalc_rate+0xa8/0xe0()
gmac_gmii_ref_clk_div: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
By properly configuring the gmac_gmii_ref_clk_div (GMAC_MAIN_CLK) to
have the parent of dpll_gmac_m2_ck always divided by 2 the warning is
resolved and the clock tree is fixed up.
Additionally, a new clock called rmii_50mhz_clk_mux is defined that
does utilize CM_GMAC_GMAC_CLKCTRL[24] CLKSEL_REF to configure the
source clock for the RMII_50MHZ_CLK.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Reviewed-by: Trenton Andres <trenton.andres@garmin.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Masahiro Yamada [Tue, 30 Aug 2016 20:01:06 +0000 (05:01 +0900)]
ARM: dts: uniphier: add specific compatible to SoC-Glue node
This is a simple MFD, but add a specific compatible just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 30 Aug 2016 10:13:09 +0000 (19:13 +0900)]
ARM: dts: uniphier: use clock/reset controllers
The UniPhier reset controller driver has been merged. Enable it.
Also, replace the fixed-rate clocks with the dedicated clock
drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kishon Vijay Abraham I [Wed, 10 Aug 2016 12:33:18 +0000 (18:03 +0530)]
ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Wed, 24 Aug 2016 07:58:59 +0000 (13:28 +0530)]
ARM: dts: am335x-icev2: Add nodes for gpio-decoder
AM335x ICE board has a rotary-switch connected to PCA9536 I2C GPIO
expander. The position of the rotary-switch is reflected by status of
GPIO lines. Add gpio-decoder node to read these GPIO line status via
gpio-decoder driver and report it as an input event to the system.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Masahiro Yamada [Sun, 28 Aug 2016 18:27:42 +0000 (03:27 +0900)]
ARM: dts: uniphier: switch over to PSCI
Use PSCI for enable-method instead of SoC specific implementation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 30 Aug 2016 05:02:41 +0000 (14:02 +0900)]
ARM: dts: uniphier: match DT names to other projects and documents
All UniPhier device trees have the common prefix "uniphier-", so
"ph1-" is just making names longer. Recent documents and other
projects are not using PH1- prefixes any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 28 Aug 2016 18:27:42 +0000 (03:27 +0900)]
ARM: dts: uniphier: remove a whitespace after tabs
A trivial codying style fix.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adam Ford [Sun, 28 Aug 2016 02:19:25 +0000 (21:19 -0500)]
ARM: dts: Add LogicPD DM37/AM37 Torpedo and SOM-LV
Support is in the device tree, but they are not mentioned here.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Fri, 26 Aug 2016 15:38:54 +0000 (17:38 +0200)]
ARM: dts: mvebu: fix reference to a390 spi controller
The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
to a different location in the hierarchy, which breaks the overrides
in the board specific file:
Warning (reg_format): "reg" property in /soc/internal-regs/spi@10680/spi-flash@1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi@10680/spi-flash@1
This changes the board to reference the spi controller by its label
(which has not changed) rather than the full path.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Linus Torvalds [Sun, 28 Aug 2016 22:04:33 +0000 (15:04 -0700)]
Linux 4.8-rc4
Linus Torvalds [Sun, 28 Aug 2016 21:31:36 +0000 (14:31 -0700)]
Merge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
ones. Nothing too strange at this point"
* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/tegra: dsi: Enhance runtime power management
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
drm: Reject page_flip for !DRIVER_MODESET
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
...
Mario Kleiner [Fri, 26 Aug 2016 23:02:28 +0000 (01:02 +0200)]
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sun, 28 Aug 2016 17:02:23 +0000 (10:02 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A few fixes from the perf departement
- prevent a imbalanced preemption disable in the events teardown code
- prevent out of bound acces in perf userspace
- make perf tools compile with UCLIBC again
- a fix for the userspace unwinder utility"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Use this_cpu_ptr() when stopping AUX events
perf evsel: Do not access outside hw cache name arrays
tools lib: Reinstate strlcpy() header guard with __UCLIBC__
perf unwind: Use addr_location::addr instead of ip for entries
projects / linux-2.6-microblaze.git / log