drm/nouveau/instmem: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/iccsense: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/ibus: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/i2c: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gsp: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gpio: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fuse: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fault: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/devinit: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/clk: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/bus: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/bios: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/bar: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/acr: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/nvkm: add macros for subdev layout

Rather than having to add new engines / engine instances to multiple places,
define everything in include/nvkm/core/layout.h and use macros to generate
the required plumbing.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/device: pass instance id when looking up a subdev/engine

This switches to using the subdev list for lookup, and otherwise should
be a no-op aside from switching the function signatures.

Callers will be transitioned to split type+inst individually.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/subdev: track type+instance separately

We use subdev id bitmasks (as a u64) in a number of places, and GA100 adds
enough new engine instances that we run out of bits.  We could alias IDs of
engines that no longer exist, but it's cleaner for a number of reasons to
just split the subdev index into a subdev type, and instance ID instead.

Just a lot more painful to do.

This magics up the values for old-style subdev constructors, and provides a
way to incrementally transition each subdev to the new style.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/subdev: store full subdev name in struct

Much easier to store this to avoid having to reconstruct a string for a
specific subdev, taking into account whether it's instanced or not.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/subdev: store subdevs in list

This is somewhat nicer to read.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/subdev: remove nvkm_subdev.mutex

There's not really any nice way to assign the lock classes when we split
subdev indices into type+inst, and saves a few bytes in the structs when
a subdev has no need for it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/perfmon: use private spinlock to control exclusive access to perfmon

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/disp: use private spinlock to control exclusive access to disp

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu: serialise send() with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/mmu: serialise mmu invalidations with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/ltc: serialise cbc operations with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/instmem: protect mm/lru with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb: protect vram mm with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb: protect comptags with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/engine: use refcount_t + private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/amd/display: fix unused variable warning

After all users of the 'dm' warnings got hidden in an #ifdef,
the compiler started warning about it being unused:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable]

Add another such #ifdef.

Fixes: 98ab5f3513f9 ("drm/amd/display: Fix deadlock during gpu reset v3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org

Merge tag 'amd-drm-next-5.12-2021-02-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-02-03:

amdgpu:
- Display fixes and cleanups
- Vangogh fixes
- Fix possible race when there are timeouts on two rings
- SR-IOV fixes
- Add missing license
- DCE 10/12 bpc fixes
- Display MALL fixes
- Fix SMU user preference settings persistence
- Fix retry in gem allocate
- Add new PCI DID
- Fix for manual fan speed control on cards where it was problematic
- Fix regression in pinning GTT
- Misc display fixes
- Misc code cleanups

amdkfd:
- Fix config handling
- Fix regression in buffer free

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204045717.3823-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'mediatek-drm-next-5.12' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.12

1. Decouple Mediatek DRM sub driver
2. Share mtk mutex driver for both DRM and MDP
3. Add support for SoC MT8183

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org

drm/mediatek: Add matrix_bits private data for ccorr

Add matrix_bits and coeffs_precision to ccorr private data:
- matrix bits of mt8183 is 10
- matrix bits of mt8192 is 11

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix ccorr size config

Fix setting to follow hardware datasheet. The original error setting
affects mt8192 display.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Separate ccorr module

ccorr ctm matrix bits will be different in mt8192.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Enable dither function

Enable dither function to improve the display quality.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Enable OVL_LAYER_SMI_ID_EN for multi-layer usecase

Enable OVL_LAYER_SMI_ID_EN for multi-layer usecase, without this patch,
ovl will hang up when more than 1 layer enabled.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add support for SoC MT8183

1. Add ovl private data
2. Add rdma private data
3. Add gamma privte data
4. Add main and external path module for crtc create

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add has_dither private data for gamma

Not all SoC has dither function in gamma module.
Add private data to control this function setting.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Separate gamma module

mt8183 gamma module will different with mt8173,
so separate gamma for adding private data.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add mtk_dither_set_common() function

Current implementation of mtk_dither_set() cast dev data to
struct mtk_ddp_comp_dev. But other devices with different dev data
would also call this function.

Separate necessary parameters out so other device components (dither,
gamma) can call this function.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

soc / drm: mediatek: Move mtk mutex driver to soc folder

mtk mutex is used by DRM and MDP driver, and its function is SoC-specific,
so move it to soc folder.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>

drm/mediatek: Automatically search unclaimed mtk mutex in mtk_mutex_get()

Moving mutex resource management from client driver to  mutex driver
could prevent client drivers negotiating for resource management.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Change disp/ddp term to mutex in mtk mutex driver

mtk mutex is used by both drm and mdp driver, so change disp/ddp term to
mutex to show that it's a common driver for drm and mdp.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Rename file mtk_drm_ddp to mtk_mutex

After mmsys routing function is moved out of mtk_drm_ddp.c, mtk_drm_ddp.c
has only mtk mutex function, so rename it to match the function in it.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Remove redundant file including

Those file includings are useless, so remove them.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add fifo_size into rdma private data

Get the fifo size from device tree
because each rdma in the same SoC may have different fifo size

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix aal size config

The orginal setting is not correct, fix it to follow hardware data sheet.
If keep this error setting, mt8173/mt8183 display ok
but mt8192 display abnormal.

Fixes: 0664d1392c26 ("drm/mediatek: Add AAL engine basic function")

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

dt-bindings: mediatek: add description for postmask

add description for postmask
postmask is used control round corner for display frame

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: mtk_dpi: Create connector for bridges

Similar to commit a9d9fea74be2
("drm/mediatek: mtk_dsi: Create connector for bridges"):

Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

dt-bindings: mediatek: add rdma-fifo-size description for mt8183 display

rdma fifo size may be different even in same SOC, add this
property to the corresponding rdma

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Check if fb is null

It's possible that state->base.fb is null. Add a check before access its
format.

Fixes: b6b1bb980ec4 ("drm/mediatek: Turn off Alpha bit when plane format has no alpha")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Merge tag 'drm-intel-next-2021-01-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- WARN if plane src coords are too big (Ville)
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com

Merge tag 'drm/tegra/for-5.12-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next

drm/tegra: Changes for v5.12-rc1

Adds support for newer firmware image versions of the Video Image
Composer (VIC) and adds a comment clarifying the use of the STREAMID
registers. Fixes a couple of issues with display and gr2d on older
Tegra SoCs such as Tegra114, as well as a runtime PM reference leak.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129193807.3653456-1-thierry.reding@gmail.com

drm/amdgpu: Prevent shift wrapping in amdgpu_read_mask()

If the user passes a "level" value which is higher than 31 then that
leads to shift wrapping.  The undefined behavior will lead to a
syzkaller stack dump.

Fixes: 5632708f4452 ("drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/display: remove unneeded variable: "pattern"

Remove unneeded variable: "pattern".

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Disable GFXOFF when GFX DPM or PG disabled

Check GFX DPM and PG bit before enable GFXOFF on Vangogh
smu post init.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.121

This version brings along following fixes:
- Better handling of dummy p-state table
- Workaround for some legacy DP-VGA dongles
- Add Freesync HDMI support to DMCU
- Enable "trigger_hotplug" debugfs on all outputs
- fix initial bounding box values for dcn3.02
- implement support for DID2.0 dsc passthrough
- fix calculation for the pwl backlight curve
- Fix multiple memory leaks

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.50

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reject too small viewport size when validating plane

[why]
Overlay won't move to a new positon if viewport size is smaller than
what can be handled. It'd either disappear or stay at the old
position. This condition is for example hit if overlay is moved too
much outside of left or top edge of the screen, but it applies to
any non-cursor plane type.

[how]
Reject this contidion at validation time. This gives the calling
level a chance to handle this gracefully and avoid inconsistent
behaivor.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Better handling of dummy p-state table

[Why]
Some scenarios where we use a UCLK frequency in between dummy p-state table
entries result in a p-state hang, due to the table not having a close
enough match, so the default DPM0 latency is used, which can be too long to
support dummy p-state switching in these scenarios.

[How]
 - old: match if current freq is within +- margin of table entry
 - new: find largest table entry that is lower than current freq + margin
   - lower than DPM0 will still use DPM0

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Workaround for some legacy DP-VGA dongles

[Why]
Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA
dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and
this leads to the maximum resolution 1920*1080 cannot be obtained from EDID.

[How]
Provide a workaround for some legacy DP-VGA dongles with a longer aux delay.

Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decrement refcount of dc_sink before reassignment

[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.

[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Free atomic state after drm_atomic_commit

[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.

[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused force_ignore_link_settings debug option

[why]
Remove force_ignore_link_settings debug option as it is no longer used.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Freesync HDMI support to DMCU

[Why]
Adding support for Freesync HDMI to DC and DMCU

[How]
Create DC interface and implementation on top of DMCU to support
parsing CEA blocks in DMCU.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable "trigger_hotplug" debugfs on all outputs

[Why]
Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only.
New IGT tests need this entry to test other outputs.

[How]
Enable this debugfs entry on all types of connectors

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix CW4 programming for dmub30 cached inbox

[Why]
The conditions for whether we used cached vs non-cached inbox1 depend
on a version check that mismatches what the shared helpers in dmub20
implement.

[How]
Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix initial bounding box values for dcn3.02

[Why]
Initial bounding box values are updated in dcn30_update_bw_bounding_box
 but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and
 dcn3_02_ip

[How]
Add dcn302_update_bw_bounding_box and
 dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses
 dcn3_02_soc and dcn3_02_ip.
Use sr_exit_time_us, sr_enter_plus_exit_time_us,
 from dcn30 on dcn302 to fix flicker on eDP.
 Also use dram_clock_change_latency_us from dcn30.

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement support for DID2.0 dsc passthrough

[Why]
Some panels contain active converters (e.g. DP to MIPI) which only support
restricted DSC configurations.  DID2.0 adds support for such displays to
explicitly define per timing BPP restrictions on DSC.  Ignoring these
restrictions leads to blackscreen.

[How]
Add parsing in DID2.0 parser to get this bpp info.
Add support in DSC module to constraint target bpp based
on this info.

Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dc_sink kref count in emulated_link_detect

[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.

[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Release DSC before acquiring

[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.

[how]
Before acquiring dsc to stream resources, first remove it.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "Fix EDID parsing after resume from suspend"

This reverts commit b24bdc37d03a0478189e20a50286092840f414fa.
It caused memory leak after S3 on 4K HDMI displays.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix calculation for the pwl backlight curve

[Why]
The PWL backlight curve is used by the firmware to convert between
brightness and linear PWM value.
Driver has a backlight LUT, but the firmware holds a PWL curve and
interpolates between points.

The calculations are incorrect leading to slightly off backlight values
being programmed.

[How]
Fix the PWL backlight curve threshold/offset calculations

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.120

This DC update brings improvements in multiple areas. In summary, we highlight:
 - Fix display detection on HDMI ComboPHY
 - Drop SOC bounding box hookup
 - Fix DPCD values

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.49

- Add field for passing line time for a frame

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add more Clock Sources to DCN2.1

[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.

[HOW]
Initialize more clock sources.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct some hdcp variable naming

[why]
In HDCP update stream config interface, some variables are named as
xxx_supported, but in fact the variable indicates whether or not xxx_enabled.
Correct the naming so it is less confusing to read the code.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set power_gated to true for seamless boot pipe init

[Why]
In seamless boot without a flip case, the flag power_gated didn't
get cleared when resetting path mode because the plane_state is null.
The following sequence will cause this issue:
    1. OS call set mode to clone/extended
    2. Reset path mode to remove edp

[How]
Set power gated default to true in seamless boot pipe

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reuse current context instead of recreating one

[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.

Recreating the context can lead to mismatch between new context and the
current context

For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.

[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null pointer check to is_dig_enabled func

[WHY]
Safeguarding as pointer may be null in diagnostic environment

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: initialize i2c speed if not initialized in dcnxxx__resource.c

Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds
the required initialization at dc_construct().

Signed-off-by: Brendan Steve Leder <brendanSteve.Leder@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL

[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.

[How]
Update values to match the spec.

Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop SOC bounding box hookup in DM/DC

[Why]
There aren't any ASIC where we use these binaries and they aren't
useful for future use since it's inconvenient to extend and maintain
these structures.

[How]
Drop the support from DM and DC for now.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable freesync for A+A configs

Some newer APUs can scanout directly from GTT, that saves us from
allocating another bounce buffer in VRAM and enables freesync in such
configurations.

Without this patch creating a framebuffer from the imported BO will
fail and userspace will fall back to a copy.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: remove some useless code for vangogh

This patch is to remove some useless code for vangogh.
In the earlier code, vangogh can't finish all the sequence of
smu late init. But now vangogh has one stable work state,so
remove the useless code.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fill in the data member of v2 gpu metrics table for vangogh

This patch is to fill in the data member of v2 gpu metrics
table for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register offsets for VGH

For Vangogh:
The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation.
The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation.

Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a false positive when pin non-VRAM memory

Flag TTM_PL_FLAG_CONTIGUOUS is only valid for VRAM domain. So fix the
false positive by checking memory type too.

Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Limit the maximum size of contiguous VRAM that can be encapsulated by an instance of DRM memory node

[Why]
Enable 1:1 mapping between VRAM of a DRM node and a scatterlist node

[How]
Ensure construction of DRM node to not exceed specified limit

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix null pointer panic while free buffer in kfd

In drm_gem_object_free, it will call funcs of drm buffer obj. So
kfd_alloc should use amdgpu_gem_object_create instead of
amdgpu_bo_create to initialize the funcs as amdgpu_gem_object_funcs.

[  396.231390] amdgpu: Release VA 0x7f76b4ada000 - 0x7f76b4add000
[  396.231394] amdgpu:   remove VA 0x7f76b4ada000 - 0x7f76b4add000 in entry 0000000085c24a47
[  396.231408] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  396.231445] #PF: supervisor read access in kernel mode
[  396.231466] #PF: error_code(0x0000) - not-present page
[  396.231484] PGD 0 P4D 0
[  396.231495] Oops: 0000 [#1] SMP NOPTI
[  396.231509] CPU: 7 PID: 1352 Comm: clinfo Tainted: G           OE     5.11.0-rc2-custom #1
[  396.231537] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS WCD0401N_Weekly_20_04_0 04/01/2020
[  396.231563] RIP: 0010:drm_gem_object_free+0xc/0x22 [drm]
[  396.231606] Code: eb ec 48 89 c3 eb e7 0f 1f 44 00 00 55 48 89 e5 48 8b bf 00 06 00 00 e8 72 0d 01 00 5d c3 0f 1f 44 00 00 48 8b 87 40 01 00 00 <48> 8b 00 48 85 c0 74 0b 55 48 89 e5 e8 54 37 7c db 5d c3 0f 0b c3
[  396.231666] RSP: 0018:ffffb4704177fcf8 EFLAGS: 00010246
[  396.231686] RAX: 0000000000000000 RBX: ffff993a0d0cc400 RCX: 0000000000003113
[  396.231711] RDX: 0000000000000001 RSI: e9cda7a5d0791c6d RDI: ffff993a333a9058
[  396.231736] RBP: ffffb4704177fdd0 R08: ffff993a03855858 R09: 0000000000000000
[  396.231761] R10: ffff993a0d1f7158 R11: 0000000000000001 R12: 0000000000000000
[  396.231785] R13: ffff993a0d0cc428 R14: 0000000000003000 R15: ffffb4704177fde0
[  396.231811] FS:  00007f76b5730740(0000) GS:ffff993b275c0000(0000) knlGS:0000000000000000
[  396.231840] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  396.231860] CR2: 0000000000000000 CR3: 000000016d2e2000 CR4: 0000000000350ee0
[  396.231885] Call Trace:
[  396.231897]  ? amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x24c/0x25f [amdgpu]
[  396.232056]  ? __dynamic_dev_dbg+0xcd/0x100
[  396.232076]  kfd_ioctl_free_memory_of_gpu+0x91/0x102 [amdgpu]
[  396.232214]  kfd_ioctl+0x211/0x35b [amdgpu]
[  396.232341]  ? kfd_ioctl_get_queue_wave_state+0x52/0x52 [amdgpu]

Fixes: 246cb7e49a70 ("drm/amdgpu: Introduce GEM object functions")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Changfeng <changzhu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the issue that retry constantly once the buffer is oversize

We cannot modify initial_domain every time while the retry starts. That
will cause the busy waiting that unable to switch to GTT while the vram
is not enough.

Fixes: f8aab60422c3 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs")

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swsmu: use percent rather than rpm for manual fan control (v2)

On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Both interfaces work properly on the boards I have.
Let's try and use the percent interface instead.

v2: rebase on revert

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"

On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11.  The follow on patch
fixes this properly for 5.12.

This reverts commit 8d6e65adc25e23fabbc5293b6cd320195c708dca.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify bool conversion

Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:3137:35-40:
WARNING: conversion to bool not needed here

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Yang Li <oswb@linux.alibaba.com>
Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: Add Missing Sienna Cichlid DID

The purpose of this patch is to add a missing device ID for Sienna Cichlid.
The missing ID "0x73A1" is now added to the "amdgpu_drv.c" file.

Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct string parsing for extra separator characters case

Supplement of previous fix.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Account for extra separator characters in sysfs interface

Currently, the the input to the pp_od_clk_voltage sysfs interface has
two adjacent separator characters, i.e. "\n\0", then we try to parse an
argument out of the empty string, whereas we really should just ignore
this case, and treat any number of adjacent separators as one separator
for arguments.

We do this here by simply skipping the argument parsing for all
empy-string arguments.

An example test case would be `echo 's  1 900' > pp_od_clk_voltage`
(note the two spaces after the 's'.

This also solves the issue where the written string ends with both a
newline, and a nul-terminator, '\n\0', as is the case for `echo 's 1
900' > pp_od_clk_voltage` since the recent rebase.

Got lost during code rebase/merge. No need to port this to other
branches.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>