git.monstr.eu Git - linux-2.6-microblaze.git/log

devres: allow const resource arguments

devm_ioremap_resource() does not currently take 'const' arguments, which
results in a warning from the first driver trying to do it anyway:

  drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
  drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
    priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
                                                   ^~~~~~~~~~~~~~~~~~~

Change the prototype to allow it, as there is no real reason not to.

Link: http://lkml.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: prevent useless kswapd loops

In production we have noticed hard lockups on large machines running
large jobs due to kswaps hoarding lru lock within isolate_lru_pages when
sc->reclaim_idx is 0 which is a small zone.  The lru was couple hundred
GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in
isolate_lru_pages() was basically skipping GiBs of pages while holding
the LRU spinlock with interrupt disabled.

On further inspection, it seems like there are two issues:

(1) If kswapd on the return from balance_pgdat() could not sleep (i.e.
    node is still unbalanced), the classzone_idx is unintentionally set
    to 0 and the whole reclaim cycle of kswapd will try to reclaim only
    the lowest and smallest zone while traversing the whole memory.

(2) Fundamentally isolate_lru_pages() is really bad when the
    allocation has woken kswapd for a smaller zone on a very large machine
    running very large jobs.  It can hoard the LRU spinlock while skipping
    over 100s of GiBs of pages.

This patch only fixes (1).  (2) needs a more fundamental solution.  To
fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is
invalid use the classzone_idx of the previous kswapd loop otherwise use
the one the waker has requested.

Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com
Fixes: e716f2eb24de ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/userfaultfd.c: disable irqs for fault_pending and event locks

When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.

This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.

But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.

Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.

Commit ae62c16e105a ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.

Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix regression with deferred struct page init

Commit 0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time
instead of doing larger sections") is causing a regression on some
systems when the kernel is booted as Xen dom0.

The system will just hang in early boot.

Reason is an endless loop in get_page_from_freelist() in case the first
zone looked at has no free memory.  deferred_grow_zone() is always
returning true due to the following code snipplet:

  /* If the zone is empty somebody else may have cleared out the zone */
  if (!deferred_init_mem_pfn_range_in_zone(&i, zone, &spfn, &epfn,
                                           first_deferred_pfn)) {
          pgdat->first_deferred_pfn = ULONG_MAX;
          pgdat_resize_unlock(pgdat, &flags);
          return true;
  }

This in turn results in the loop as get_page_from_freelist() is assuming
forward progress can be made by doing some more struct page
initialization.

Link: http://lkml.kernel.org/r/20190620160821.4210-1-jgross@suse.com
Fixes: 0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time instead of doing larger sections")
Signed-off-by: Juergen Gross <jgross@suse.com>
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'sound-5.2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Here are a collection of small fixes for:

   - A race with ASoC HD-audio registration

   - LINE6 usb-audio memory overwrite by malformed descriptor

   - FireWire MIDI handling

   - Missing cast for bit shifts in a few USB-audio quirks

   - The wrong function calls in minor OSS sequencer code paths

   - A couple of HD-audio quirks"

* tag 'sound-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: line6: Fix write on zero-sized buffer
  ALSA: hda: Fix widget_mutex incomplete protection
  ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages
  ALSA: seq: fix incorrect order of dest_client/dest_ports arguments
  ALSA: hda/realtek - Change front mic location for Lenovo M710q
  ALSA: usb-audio: fix sign unintended sign extension on left shifts
  ALSA: hda/realtek: Add quirks for several Clevo notebook barebones

ptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME

Fix two issues:

When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred(). However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.

PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case. If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.

Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.

This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.

Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/imx: only send event on crtc disable if kept disabled

The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.

Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/imx: notify drm core before sending event during crtc disable

Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.

This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec

This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time

Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge tag 'trace-v5.2-rc5' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"This includes three fixes:

   - Fix a deadlock from a previous fix to keep module loading and
     function tracing text modifications from stepping on each other
     (this has a few patches to help document the issue in comments)

   - Fix a crash when the snapshot buffer gets out of sync with the main
     ring buffer

   - Fix a memory leak when reading the memory logs"

* tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
  tracing/snapshot: Resize spare buffer if size changed
  tracing: Fix memory leak in tracing_err_log_open()
  ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
  ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()

Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes

Fix a kernel nullptr deref on module
unload when any etnaviv GPU failed to initialize properly.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1561974148.2321.1.camel@pengutronix.de

Merge tag 'drm-misc-fixes-2019-07-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

panfrost- Avoid double free by deleting GEM handle in create_bo failure
path (Boris)

Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704001302.GA260390@art_vandelay

Merge tag 'drm-fixes-5.2-2019-07-02' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

drm-fixes-5.2-2019-07-02:

Fixes for stable

amdgpu:
- stability fix for gfx9
- regression fix for HG on some polaris boards
- crash fix for some new OEM boards

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703015705.3162-1-alexander.deucher@amd.com

Merge tag 'gpio-v5.2-4' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
"A single fixup for the SPI CS gpios that regressed in the current
kernel cycle"

* tag 'gpio-v5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio/spi: Fix spi-gpio regression on active high CS

nfsd: Fix overflow causing non-working mounts on 1 TB machines

Since commit 10a68cdf10 (nfsd: fix performance-limiting session
calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with
1 TB of memory cannot be mounted anymore. The mount just hangs on the
client.

The gist of commit 10a68cdf10 is the change below.

    -avail = clamp_t(int, avail, slotsize, avail/3);
    +avail = clamp_t(int, avail, slotsize, total_avail/3);

Here are the macros.

    #define min_t(type, x, y)       __careful_cmp((type)(x), (type)(y), <)
    #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)

`total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts
the values to `int`, which for 32-bit integers can only hold values
−2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1).

`avail` (in the function signature) is just 65536, so that no overflow
was happening. Before the commit the assignment would result in 21845,
and `num = 4`.

When using `total_avail`, it is causing the assignment to be
18446744072226137429 (printed as %lu), and `num` is then 4164608182.

My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the
server thinks there is no memory available any more for this client.

Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long`
fixes the issue.

Now, `avail = 65536` (before commit 10a68cdf10 `avail = 21845`), but
`num = 4` remains the same.

Fixes: c54f24e338ed (nfsd: fix performance-limiting session calculation)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

crypto: user - prevent operating on larval algorithms

Michal Suchanek reported [1] that running the pcrypt_aead01 test from
LTP [2] in a loop and holding Ctrl-C causes a NULL dereference of
alg->cra_users.next in crypto_remove_spawns(), via crypto_del_alg().
The test repeatedly uses CRYPTO_MSG_NEWALG and CRYPTO_MSG_DELALG.

The crash occurs when the instance that CRYPTO_MSG_DELALG is trying to
unregister isn't a real registered algorithm, but rather is a "test
larval", which is a special "algorithm" added to the algorithms list
while the real algorithm is still being tested. Larvals don't have
initialized cra_users, so that causes the crash. Normally pcrypt_aead01
doesn't trigger this because CRYPTO_MSG_NEWALG waits for the algorithm
to be tested; however, CRYPTO_MSG_NEWALG returns early when interrupted.

Everything else in the "crypto user configuration" API has this same bug
too, i.e. it inappropriately allows operating on larval algorithms
(though it doesn't look like the other cases can cause a crash).

Fix this by making crypto_alg_match() exclude larval algorithms.

[1] https://lkml.kernel.org/r/20190625071624.27039-1-msuchanek@suse.de
[2] https://github.com/linux-test-project/ltp/blob/20190517/testcases/kernel/crypto/pcrypt_aead01.c

Reported-by: Michal Suchanek <msuchanek@suse.de>
Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org> # v3.2+
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cryptd - Fix skcipher instance memory leak

cryptd_skcipher_free() fails to free the struct skcipher_instance
allocated in cryptd_create_skcipher(), leading to a memory leak.  This
is detected by kmemleak on bootup on ARM64 platforms:

unreferenced object 0xffff80003377b180 (size 1024):
   comm "cryptomgr_probe", pid 822, jiffies 4294894830 (age 52.760s)
   backtrace:
     kmem_cache_alloc_trace+0x270/0x2d0
     cryptd_create+0x990/0x124c
     cryptomgr_probe+0x5c/0x1e8
     kthread+0x258/0x318
     ret_from_fork+0x10/0x1c

Fixes: 4e0958d19bd8 ("crypto: cryptd - Add support for skcipher")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/mpi: Fix karactx leak in mpi_powm

Sometimes mpi_powm will leak karactx because a memory allocation
failure causes a bail-out that skips the freeing of karactx. This
patch moves the freeing of karactx to the end of the function like
everything else so that it can't be skipped.

Reported-by: syzbot+f7baccc38dcc1e094e77@syzkaller.appspotmail.com
Fixes: cdec9cb5167a ("crypto: GnuPG based MPI lib - source files...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Bluetooth: Fix faulty expression for minimum encryption key size check

Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.

This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).

Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fix from Steve French:
"SMB3 fix (for stable as well) for crash mishandling one of the Windows
reparse point symlink tags"

* tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix crash querying symlinks stored as reparse-points

Merge tag 'for-linus-20190701' of git://git./linux/kernel/git/brauner/linux

Pull pidfd fork() fix from Christian Brauner:
"A single small fix for copy_process() in kernel/fork.c:

  With Al's removal of ksys_close() from cleanup paths in copy_process()
  a bug was introduced. When anon_inode_getfile() failed the cleanup was
  correctly performed but the error code was not propagated to callers
  of copy_process() causing them to operate on a nonsensical pointer.

  The fix is a simple on-liner which makes sure that a proper negative
  error code is returned from copy_process().

  syzkaller has also verified that the bug is not reproducible with this
  fix"

* tag 'for-linus-20190701' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: return proper negative error code

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Fix a build failure with the LLVM linker and a module allocation
  failure when KASLR is active:

   - Fix module allocation when running with KASLR enabled

   - Fix broken build due to bug in LLVM linker (ld.lld)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitly
  arm64: kaslr: keep modules inside module region when KASAN is enabled

Merge tag 'davinci-fixes-for-v5.2-part2' of git://git./linux/kernel/git/nsekhar/linux-davinci into arm/fixes

This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.

* tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da830-evm: fix GPIO lookup for OHCI
  ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
  ARM: davinci: da830-evm: add missing regulator constraints for OHCI
  + Linux 5.2-rc7

Signed-off-by: Olof Johansson <olof@lixom.net>

scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported

If the CHAP_A value is not supported, the chap_server_open() function
should free the auth_protocol pointer and set it to NULL, or we will leave
a dangling pointer around.

[   66.010905] Unsupported CHAP_A value
[   66.011660] Security negotiation failed.
[   66.012443] iSCSI Login negotiation failed.
[   68.413924] general protection fault: 0000 [#1] SMP PTI
[   68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1
[   68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target/iblock: Fix overrun in WRITE SAME emulation

WRITE SAME corrupts data on the block device behind iblock if the command
is emulated. The emulation code issues (M - 1) * N times more bios than
requested, where M is the number of 512 blocks per real block size and N is
the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a
device with 4k blocks, 7 * N more LBAs gets written after the requested
range.

The issue happens because the number of 512 byte sectors to be written is
decreased one by one while the real bios are typically from 1 to 8 512 byte
sectors per bio.

Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

gpio/spi: Fix spi-gpio regression on active high CS

I ran into an intriguing bug caused by
commit ""spi: gpio: Don't request CS GPIO in DT use-case"
affecting all SPI GPIO devices with an active high
chip select line.

The commit switches the CS gpio handling over to the GPIO
core, which will parse and handle "cs-gpios" from the OF
node without even calling down to the driver to get the
job done.

However the GPIO core handles the standard bindings in
Documentation/devicetree/bindings/spi/spi-controller.yaml
that specifies that active high CS needs to be specified
using "spi-cs-high" in the DT node.

The code in drivers/spi/spi-gpio.c never respected this
and never tried to inspect subnodes to see if they contained
"spi-cs-high" like the gpiolib OF quirks does. Instead the
only way to get an active high CS was to tag it in the
device tree using the flags cell such as
cs-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;

This alters the quirks to not inspect the subnodes of SPI
masters on "spi-gpio" for the standard attribute "spi-cs-high",
making old device trees work as expected.

This semantic is a bit ambigous, but just allowing the
flags on the GPIO descriptor to modify polarity is what
the kernel at large mostly uses so let's encourage that.

Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case")
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()

ftrace_arch_code_modify_prepare() is acquiring text_mutex, while the
corresponding release is happening in ftrace_arch_code_modify_post_process().

This has already been documented in the code, but let's also make the fact
that this is intentional clear to the semantic analysis tools such as sparse.

Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1906292321170.27227@cbobk.fhfr.pm
Fixes: 39611265edc1a ("ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()")
Fixes: d5b844a2cf507 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ALSA: line6: Fix write on zero-sized buffer

LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls. The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.

This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.

Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC

Thomas reported that:

| Background:
|
|    In preparation of supporting IPI shorthands I changed the CPU offline
|    code to software disable the local APIC instead of just masking it.
|    That's done by clearing the APIC_SPIV_APIC_ENABLED bit in the APIC_SPIV
|    register.
|
| Failure:
|
|    When the CPU comes back online the startup code triggers occasionally
|    the warning in apic_pending_intr_clear(). That complains that the IRRs
|    are not empty.
|
|    The offending vector is the local APIC timer vector who's IRR bit is set
|    and stays set.
|
| It took me quite some time to reproduce the issue locally, but now I can
| see what happens.
|
| It requires apicv_enabled=0, i.e. full apic emulation. With apicv_enabled=1
| (and hardware support) it behaves correctly.
|
| Here is the series of events:
|
|     Guest CPU
|
|     goes down
|
|       native_cpu_disable()
|
| apic_soft_disable();
|
|     play_dead()
|
|     ....
|
|     startup()
|
|       if (apic_enabled())
|         apic_pending_intr_clear() <- Not taken
|
|      enable APIC
|
|         apic_pending_intr_clear() <- Triggers warning because IRR is stale
|
| When this happens then the deadline timer or the regular APIC timer -
| happens with both, has fired shortly before the APIC is disabled, but the
| interrupt was not serviced because the guest CPU was in an interrupt
| disabled region at that point.
|
| The state of the timer vector ISR/IRR bits:
|
|                            ISR     IRR
| before apic_soft_disable()    0       1
| after apic_soft_disable()     0       1
|
| On startup        0       1
|
| Now one would assume that the IRR is cleared after the INIT reset, but this
| happens only on CPU0.
|
| Why?
|
| Because our CPU0 hotplug is just for testing to make sure nothing breaks
| and goes through an NMI wakeup vehicle because INIT would send it through
| the boots-trap code which is not really working if that CPU was not
| physically unplugged.
|
| Now looking at a real world APIC the situation in that case is:
|
|                           ISR     IRR
| before apic_soft_disable()    0       1
| after apic_soft_disable()     0       1
|
| On startup        0       0
|
| Why?
|
| Once the dying CPU reenables interrupts the pending interrupt gets
| delivered as a spurious interupt and then the state is clear.
|
| While that CPU0 hotplug test case is surely an esoteric issue, the APIC
| emulation is still wrong, Even if the play_dead() code would not enable
| interrupts then the pending IRR bit would turn into an ISR .. interrupt
| when the APIC is reenabled on startup.

From SDM 10.4.7.2 Local APIC State After It Has Been Software Disabled
* Pending interrupts in the IRR and ISR registers are held and require
  masking or handling by the CPU.

In Thomas's testing, hardware cpu will not respect soft disable LAPIC
when IRR has already been set or APICv posted-interrupt is in flight,
so we can skip soft disable APIC checking when clearing IRR and set ISR,
continue to respect soft disable APIC when attempting to set IRR.

Reported-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Change KVM_STATE_NESTED_EVMCS to signal vmcs12 is copied from eVMCS

Currently KVM_STATE_NESTED_EVMCS is used to signal that eVMCS
capability is enabled on vCPU.
As indicated by vmx->nested.enlightened_vmcs_enabled.

This is quite bizarre as userspace VMM should make sure to expose
same vCPU with same CPUID values in both source and destination.
In case vCPU is exposed with eVMCS support on CPUID, it is also
expected to enable KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability.
Therefore, KVM_STATE_NESTED_EVMCS is redundant.

KVM_STATE_NESTED_EVMCS is currently used on restore path
(vmx_set_nested_state()) only to enable eVMCS capability in KVM
and to signal need_vmcs12_sync such that on next VMEntry to guest
nested_sync_from_vmcs12() will be called to sync vmcs12 content
into eVMCS in guest memory.
However, because restore nested-state is rare enough, we could
have just modified vmx_set_nested_state() to always signal
need_vmcs12_sync.

From all the above, it seems that we could have just removed
the usage of KVM_STATE_NESTED_EVMCS. However, in order to preserve
backwards migration compatibility, we cannot do that.
(vmx_get_nested_state() needs to signal flag when migrating from
new kernel to old kernel).

Returning KVM_STATE_NESTED_EVMCS when just vCPU have eVMCS enabled
have a bad side-effect of userspace VMM having to send nested-state
from source to destination as part of migration stream. Even if
guest have never used eVMCS as it doesn't even run a nested
hypervisor workload. This requires destination userspace VMM and
KVM to support setting nested-state. Which make it more difficult
to migrate from new host to older host.
To avoid this, change KVM_STATE_NESTED_EVMCS to signal eVMCS is
not only enabled but also active. i.e. Guest have made some
eVMCS active via an enlightened VMEntry. i.e. vmcs12 is copied
from eVMCS and therefore should be restored into eVMCS resident
in memory (by copy_vmcs12_to_enlightened()).

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Allow restore nested-state to enable eVMCS when vCPU in SMM

As comment in code specifies, SMM temporarily disables VMX so we cannot
be in guest mode, nor can VMLAUNCH/VMRESUME be pending.

However, code currently assumes that these are the only flags that can be
set on kvm_state->flags. This is not true as KVM_STATE_NESTED_EVMCS
can also be set on this field to signal that eVMCS should be enabled.

Therefore, fix code to check for guest-mode and pending VMLAUNCH/VMRESUME
explicitly.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: degrade WARN to pr_warn_ratelimited

This warning can be triggered easily by userspace, so it should certainly not
cause a panic if panic_on_warn is set.

Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com
Suggested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ARM: davinci: da830-evm: fix GPIO lookup for OHCI

The fixed regulator driver doesn't specify any con_id for gpio lookup
so it must be NULL in the table entry.

Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI

We need to enable status changes for the fixed power supply for the USB
controller.

Fixes: 1d272894ec4f ("ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da830-evm: add missing regulator constraints for OHCI

We need to enable status changes for the fixed power supply for the USB
controller.

Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

drm/i915/ringbuffer: EMIT_INVALIDATE *before* switch context

Despite what I think the prm recommends, commit f2253bd9859b
("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out
to be a huge mistake when enabling Ironlake contexts as the GPU would
hang on either a MI_FLUSH or PIPE_CONTROL immediately following the
MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g.
simple rendercopies with igt, do not suffer).

Ville found the following clue,

  "[DevCTG+]: For the invalidate operation of the pipe control, the
   following pointers are affected. The
   invalidate operation affects the restore of these packets. If the pipe
   control invalidate operation is completed
   before the context save, the indirect pointers will not be restored from
   memory.
   1. Pipeline State Pointer
   2. Media State Pointer
   3. Constant Buffer Packet"

which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT,
we prevent the context-restore from chasing the dangling pointers within
the image, and explains why this likely prevents the GPU hang.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk
(cherry picked from commit 928f8f42310f244501a7c70daac82c196112c190 in drm-intel-next)
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111014
Fixes: f2253bd9859b ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

soc: ti: fix irq-ti-sci link error

The irqchip driver depends on the SoC specific driver, but we want
to be able to compile-test it elsewhere:

WARNING: unmet direct dependencies detected for TI_SCI_INTA_MSI_DOMAIN
  Depends on [n]: SOC_TI [=n]
  Selected by [y]:
  - TI_SCI_INTA_IRQCHIP [=y] && TI_SCI_PROTOCOL [=y]

drivers/irqchip/irq-ti-sci-inta.o: In function `ti_sci_inta_irq_domain_probe':
irq-ti-sci-inta.c:(.text+0x204): undefined reference to `ti_sci_inta_msi_create_irq_domain'

Rearrange the Kconfig and Makefile so we build the soc driver whenever
its users are there, regardless of the SOC_TI option.

Fixes: 49b323157bf1 ("soc: ti: Add MSI domain bus support for Interrupt Aggregator")
Fixes: f011df6179bd ("irqchip/ti-sci-inta: Add msi domain support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu into arm/fixes

mvebu fixes for 5.2 (part 2)

Use the armada-38x-uart compatible strings for Armada XP 98dx3236 SoCs
in order to not loose character anymore.

* tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node

Signed-off-by: Olof Johansson <olof@lixom.net>

ALSA: hda: Fix widget_mutex incomplete protection

The widget_mutex was introduced to serialize callers to
hda_widget_sysfs_{re}init. However, its protection of the sysfs widget array
is incomplete. For example, it is acquired around the call to
hda_widget_sysfs_reinit(), which actually creates the new array, but isn't
still acquired when codec->num_nodes and codec->start_nid is updated. So
the lock ensures one thread sets up the new array at a time, but doesn't
ensure which thread's value will end up in codec->num_nodes. If a larger
num_nodes wins but a smaller array was set up, the next call to
refresh_widgets() will touch free memory as it iterates over codec->num_nodes
that aren't there.

The widget_lock really protects both the tree as well as codec->num_nodes,
start_nid, and end_nid, so make sure it's held across that update. It should
also be held during snd_hdac_get_sub_nodes(), so that a very old read from that
function doesn't end up clobbering a later update.

Fixes: ed180abba7f1 ("ALSA: hda: Fix race between creating and refreshing sysfs entries")
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

drm/amdgpu/gfx9: use reset default for PA_SC_FIFO_SIZE

Recommended by the hw team.

Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages

In IEC 61883-6, 8 MIDI data streams are multiplexed into single
MIDI conformant data channel. The index of stream is calculated by
modulo 8 of the value of data block counter.

In fireworks, the value of data block counter in CIP header has a quirk
with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA
IEC 61883-1/6 packet streaming engine to miss detection of MIDI
messages.

This commit fixes the miss detection to modify the value of data block
counter for the modulo calculation.

For maintainers, this bug exists since a commit 18f5ed365d3f ("ALSA:
fireworks/firewire-lib: add support for recent firmware quirk") in Linux
kernel v4.2. There're many changes since the commit. This fix can be
backported to Linux kernel v4.4 or later. I tagged a base commit to the
backport for your convenience.

Besides, my work for Linux kernel v5.3 brings heavy code refactoring and
some structure members are renamed in 'sound/firewire/amdtp-stream.h'.
The content of this patch brings conflict when merging -rc tree with
this patch and the latest tree. I request maintainers to solve the
conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'.

Fixes: df075feefbd3 ("ALSA: firewire-lib: complete AM824 data block processing layer")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

vfs: move_mount: reject moving kernel internal mounts

sys_move_mount() crashes by dereferencing the pointer MNT_NS_INTERNAL,
a.k.a. ERR_PTR(-EINVAL), if the old mount is specified by fd for a
kernel object with an internal mount, such as a pipe or memfd.

Fix it by checking for this case and returning -EINVAL.

[AV: what we want is is_mounted(); use that instead of making the
condition even more convoluted]

Reproducer:

    #include <unistd.h>

    #define __NR_move_mount         429
    #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004

    int main()
    {
     int fds[2];

     pipe(fds);
        syscall(__NR_move_mount, fds[0], "", -1, "/", MOVE_MOUNT_F_EMPTY_PATH);
    }

Reported-by: syzbot+6004acbaa1893ad013f0@syzkaller.appspotmail.com
Fixes: 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fork: return proper negative error code

Make sure to return a proper negative error code from copy_process()
when anon_inode_getfile() fails with CLONE_PIDFD.
Otherwise _do_fork() will not detect an error and get_task_pid() will
operator on a nonsensical pointer:

R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 00007ffc15fbb0ff R14: 00007ff07e47e9c0 R15: 0000000000000000
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7990 Comm: syz-executor290 Not tainted 5.2.0-rc6+ #9
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:194 [inline]
RIP: 0010:get_task_pid+0xe1/0x210 kernel/pid.c:372
Code: 89 ff e8 62 27 5f 00 49 8b 07 44 89 f1 4c 8d bc c8 90 01 00 00 eb 0c
e8 0d fe 25 00 49 81 c7 38 05 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 18 00 74
08 4c 89 ff e8 31 27 5f 00 4d 8b 37 e8 f9 47 12 00
RSP: 0018:ffff88808a4a7d78 EFLAGS: 00010203
RAX: 00000000000000a7 RBX: dffffc0000000000 RCX: ffff888088180600
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88808a4a7d90 R08: ffffffff814fb3a8 R09: ffffed1015d66bf8
R10: ffffed1015d66bf8 R11: 1ffff11015d66bf7 R12: 0000000000041ffc
R13: 1ffff11011494fbc R14: 0000000000000000 R15: 000000000000053d
FS:  00007ff07e47e700(0000) GS:ffff8880aeb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b5100 CR3: 0000000094df2000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  _do_fork+0x1b9/0x5f0 kernel/fork.c:2360
  __do_sys_clone kernel/fork.c:2454 [inline]
  __se_sys_clone kernel/fork.c:2448 [inline]
  __x64_sys_clone+0xc1/0xd0 kernel/fork.c:2448
  do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Link: https://lore.kernel.org/lkml/000000000000e0dc0d058c9e7142@google.com
Reported-and-tested-by: syzbot+002e636502bc4b64eb5c@syzkaller.appspotmail.com
Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups")
Cc: Jann Horn <jannh@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>

drm/amdgpu: Don't skip display settings in hwmgr_resume()

I'm not entirely sure why this is, but for some reason:

921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed")

Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:

[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).

And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.

Fixes: 921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use hardware fan control if no powerplay fan table

Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

mtd: rawnand: ingenic: Fix ingenic_ecc dependency

If MTD_NAND_JZ4780 is y and MTD_NAND_JZ4780_BCH is m,
which select CONFIG_MTD_NAND_INGENIC_ECC to m, building fails:

drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_remove':
ingenic_nand.c:(.text+0x177): undefined reference to `ingenic_ecc_release'
drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_ecc_correct':
ingenic_nand.c:(.text+0x2ee): undefined reference to `ingenic_ecc_correct'

To fix that, the ingenic_nand and ingenic_ecc modules have been fused
into one single module.
- The ingenic_ecc.c code is now compiled in only if
  $(CONFIG_MTD_NAND_INGENIC_ECC) is set. This is now a boolean instead
  of tristate.
- To avoid changing the module name, the ingenic_nand.c file is moved to
  ingenic_nand_drv.c. Then the module name is still ingenic_nand.
- Since ingenic_ecc.c is no more a module, the module-specific macros
  have been dropped, and the functions are no more exported for use by
  the ingenic_nand driver.

Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg

The 1Gb Macronix chip can have a maximum of 20 bad blocks, while
the 2Gb version has twice as many blocks and therefore the maximum
number of bad blocks is 40.

The 4Gb GigaDevice GD5F4GQ4xA has twice as many blocks as its 2Gb
counterpart and therefore a maximum of 80 bad blocks.

Fixes: 377e517b5fa5 ("mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg")
Reported-by: Emil Lenngren <emil.lenngren@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Linux 5.2-rc7

Merge tag 'powerpc-5.2-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
"One fix for a regression in my commit adding KUAP (Kernel User Access
  Prevention) on Radix, which incorrectly touched the AMR in the early
  machine check handler.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/exception: Fix machine check early corrupting AMR

Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
"Two small changes for the cpu hotplug code:

   - Prevent out of bounds access which actually might crash the machine
     caused by a missing bounds check in the fail injection code

   - Warn about unsupported migitation mode command line arguments to
     make people aware that they typoed the paramater. Not necessarily a
     fix but quite some people tripped over that"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix out-of-bounds read when setting fail state
  cpu/speculation: Warn on unsupported mitigations= parameter

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Misc fixes all over the place:

   - might_sleep() atomicity fix in the microcode loader

   - resctrl boundary condition fix

   - APIC arithmethics bug fix for frequencies >= 4.2 GHz

   - three 5-level paging crash fixes

   - two speculation fixes

   - a perf/stacktrace fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fall back to using frame pointers for generated code
  perf/x86: Always store regs->ip in perf_callchain_kernel()
  x86/speculation: Allow guests to use SSBD even if host does not
  x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init()
  x86/boot/64: Add missing fixup_pointer() for next_early_pgt access
  x86/boot/64: Fix crash if kernel image crosses page table boundary
  x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
  x86/resctrl: Prevent possible overrun during bitmap operations
  x86/microcode: Fix the microcode load on CPU hotplug for real

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Various fixes, most of them related to bugs perf fuzzing found in the
  x86 code"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/regs: Use PERF_REG_EXTENDED_MASK
  perf/x86: Remove pmu->pebs_no_xmm_regs
  perf/x86: Clean up PEBS_XMM_REGS
  perf/x86/regs: Check reserved bits
  perf/x86: Disable extended registers for non-supported PMUs
  perf/ioctl: Add check for the sample_period value
  perf/core: Fix perf_sample_regs_user() mm check

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:
"Diverse irqchip driver fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix command queue pointer comparison bug
  irqchip/mips-gic: Use the correct local interrupt map registers
  irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
  irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"Four fixes:
   - fix a kexec crash on arm64
   - fix a reboot crash on some Android platforms
   - future-proof the code for upcoming ACPI 6.2 changes
   - fix a build warning on x86"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efibc: Replace variable set function in notifier call
  x86/efi: fix a -Wtype-limits compilation warning
  efi/bgrt: Drop BGRT status field reserved bits check
  efi/memreserve: deal with memreserve entries in unmapped memory

Merge tag 'pm-5.2-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Avoid skipping bus-level PCI power management during system resume for
  PCIe ports left in D0 during the preceding suspend transition on
  platforms where the power states of those ports can change out of the
  PCI layer's control"

* tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: PM: Avoid skipping bus-level PM on platforms without ACPI

Merge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax

Pull XArray fixes from Matthew Wilcox:

- Account XArray nodes for the page cache to the appropriate cgroup
   (Johannes Weiner)

- Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)

- Add a test for xa_insert() (Matthew Wilcox)

* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
  XArray tests: Add check_insert
  idr: Fix idr_get_next race with idr_remove
  mm: fix page cache convergence regression

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL
  mm, swap: fix THP swap out
  fork,memcg: alloc_thread_stack_node needs to set tsk->stack
  MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info
  mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning
  mm/page_idle.c: fix oops because end_pfn is larger than max_pfn
  initramfs: fix populate_initrd_image() section mismatch
  mm/oom_kill.c: fix uninitialized oc->constraint
  mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
  mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails
  signal: remove the wrong signal_pending() check in restore_user_sigmask()
  fs/binfmt_flat.c: make load_flat_shared_library() work
  mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask
  fs/proc/array.c: allow reporting eip/esp for all coredumping threads
  mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address

Merge tag 'arc-5.2-rc7' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

- hsdk platform unifying apertures

- build system CROSS_COMPILE prefix

* tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: unify memory apertures configuration
ARC: build: Try to guess CROSS_COMPILE with cc-cross-prefix

Merge tag 'riscv-for-v5.2/fixes-rc7' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
"Minor RISC-V fixes and one defconfig update.

  The fixes have no functional impact:

   - Fix some comment text in the memory management vmalloc_fault path.

   - Fix some warnings from the DT compiler in our newly-added DT files.

   - Change the newly-added DT bindings such that SoC IP blocks with
     external I/O are marked as "disabled" by default, then enable them
     explicitly in board DT files when the devices are used on the
     board. This aligns the bindings with existing upstream practice.

   - Add the MIT license as an option for a minor header file, at the
     request of one of the U-Boot maintainers.

  The RISC-V defconfig update builds the SiFive SPI driver and the
  MMC-SPI driver by default. The intention here is to make v5.2 more
  usable for testers and users with RISC-V hardware"

* tag 'riscv-for-v5.2/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: mm: Fix code comment
  dt-bindings: clock: sifive: add MIT license as an option for the header file
  dt-bindings: riscv: resolve 'make dt_binding_check' warnings
  riscv: dts: Re-organize the DT nodes
  RISC-V: defconfig: enable MMC & SPI for RISC-V

Merge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull two more NFS client fixes from Anna Schumaker:
"These are both stable fixes.

  One to calculate the correct client message length in the case of
  partial transmissions. And the other to set the proper TCP timeout for
  flexfiles"

* tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
  SUNRPC: Fix up calculation of client message length

Merge tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
"A small fix for a potential -rc1 regression from Jeff"

* tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client:
ceph: fix ceph_mdsc_build_path to not stop on first component

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"One simple fix for a driver use after free"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()

Merge tag 'for-linus-20190628' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Just two small fixes.

  One from Paolo, fixing a silly mistake in BFQ. The other one is from
  me, ensuring that we have ->file cleared in the io_uring request a bit
  earlier. That avoids a use-before-free, if we encounter an error
  before ->file is assigned"

* tag 'for-linus-20190628' of git://git.kernel.dk/linux-block:
  block, bfq: fix operator in BFQQ_TOTALLY_SEEKY
  io_uring: ensure req->file is cleared on allocation

Merge tag 'pinctrl-v5.2-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Sorry to bomb in fixes this late. Maybe I can comfort you by saying it
  is only driver fixes, and mostly IRQ handling which is something GPIO
  and pin control drivers never get right. You think it works and then
  it doesn't.

  Summary:

   - Fix IRQ setup in the MCP23s08.

   - Fix pin setup on pins > 31 in the Ocelot driver.

   - Fix IRQs in the Mediatek driver"

* tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Update cur_mask in mask/mask ops
  pinctrl: mediatek: Ignore interrupts that are wake only during resume
  pinctrl: ocelot: fix pinmuxing for pins after 31
  pinctrl: ocelot: fix gpio direction for pins after 31
  pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order

linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL

DIV_ROUND_UP_ULL adds the two arguments and then invokes
DIV_ROUND_DOWN_ULL. But on a 32bit system the addition of two 32 bit
values can overflow. DIV_ROUND_DOWN_ULL does it correctly and stashes
the addition into a unsigned long long so cast the result to unsigned
long long here to avoid the overflow condition.

[akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval]
Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, swap: fix THP swap out

0-Day test system reported some OOM regressions for several THP
(Transparent Huge Page) swap test cases.  These regressions are bisected
to 6861428921b5 ("block: always define BIO_MAX_PAGES as 256").  In the
commit, BIO_MAX_PAGES is set to 256 even when THP swap is enabled.  So the
bio_alloc(gfp_flags, 512) in get_swap_bio() may fail when swapping out
THP.  That causes the OOM.

As in the patch description of 6861428921b5 ("block: always define
BIO_MAX_PAGES as 256"), THP swap should use multi-page bvec to write THP
to swap space.  So the issue is fixed via doing that in get_swap_bio().

BTW: I remember I have checked the THP swap code when 6861428921b5
("block: always define BIO_MAX_PAGES as 256") was merged, and thought the
THP swap code needn't to be changed.  But apparently, I was wrong.  I
should have done this at that time.

Link: http://lkml.kernel.org/r/20190624075515.31040-1-ying.huang@intel.com
Fixes: 6861428921b5 ("block: always define BIO_MAX_PAGES as 256")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fork,memcg: alloc_thread_stack_node needs to set tsk->stack

Commit 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on
memcg charge fail") corrected two instances, but there was a third
instance of this bug.

Without setting tsk->stack, if memcg_charge_kernel_stack fails, it'll
execute free_thread_stack() on a dangling pointer.

Enterprise kernels are compiled with VMAP_STACK=y so this isn't
critical, but custom VMAP_STACK=n builds should have some performance
advantage, with the drawback of risking to fail fork because compaction
didn't succeed. So as long as VMAP_STACK=n is a supported option it's
worth fixing it upstream.

Link: http://lkml.kernel.org/r/20190619011450.28048-1-aarcange@redhat.com
Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info

Add keyword support so that our mailing list gets cc'ed for clang/llvm
patches. We're pretty active on our mailing list so far as code review.
There are numerous Googlers like myself that are paid to support
building the Linux kernel with Clang and LLVM.

Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning

gcc gets confused in pcpu_get_vm_areas() because there are too many
branches that affect whether 'lva' was initialized before it gets used:

  mm/vmalloc.c: In function 'pcpu_get_vm_areas':
  mm/vmalloc.c:991:4: error: 'lva' may be used uninitialized in this function [-Werror=maybe-uninitialized]
      insert_vmap_area_augment(lva, &va->rb_node,
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       &free_vmap_area_root, &free_vmap_area_list);
       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/vmalloc.c:916:20: note: 'lva' was declared here
    struct vmap_area *lva;
                      ^~~

Add an intialization to NULL, and check whether this has changed before
the first use.

[akpm@linux-foundation.org: tweak comments]
Link: http://lkml.kernel.org/r/20190618092650.2943749-1-arnd@arndb.de
Fixes: 68ad4a330433 ("mm/vmalloc.c: keep track of free blocks for vmap allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_idle.c: fix oops because end_pfn is larger than max_pfn

Currently the calcuation of end_pfn can round up the pfn number to more
than the actual maximum number of pfns, causing an Oops.  Fix this by
ensuring end_pfn is never more than max_pfn.

This can be easily triggered when on systems where the end_pfn gets
rounded up to more than max_pfn using the idle-page stress-ng stress test:

sudo stress-ng --idle-page 0

  BUG: unable to handle kernel paging request at 00000000000020d8
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 11039 Comm: stress-ng-idle- Not tainted 5.0.0-5-generic #6-Ubuntu
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  RIP: 0010:page_idle_get_page+0xc8/0x1a0
  Code: 0f b1 0a 75 7d 48 8b 03 48 89 c2 48 c1 e8 33 83 e0 07 48 c1 ea 36 48 8d 0c 40 4c 8d 24 88 49 c1 e4 07 4c 03 24 d5 00 89 c3 be <49> 8b 44 24 58 48 8d b8 80 a1 02 00 e8 07 d5 77 00 48 8b 53 08 48
  RSP: 0018:ffffafd7c672fde8 EFLAGS: 00010202
  RAX: 0000000000000005 RBX: ffffe36341fff700 RCX: 000000000000000f
  RDX: 0000000000000284 RSI: 0000000000000275 RDI: 0000000001fff700
  RBP: ffffafd7c672fe00 R08: ffffa0bc34056410 R09: 0000000000000276
  R10: ffffa0bc754e9b40 R11: ffffa0bc330f6400 R12: 0000000000002080
  R13: ffffe36341fff700 R14: 0000000000080000 R15: ffffa0bc330f6400
  FS: 00007f0ec1ea5740(0000) GS:ffffa0bc7db00000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000020d8 CR3: 0000000077d68000 CR4: 00000000000006e0
  Call Trace:
    page_idle_bitmap_write+0x8c/0x140
    sysfs_kf_bin_write+0x5c/0x70
    kernfs_fop_write+0x12e/0x1b0
    __vfs_write+0x1b/0x40
    vfs_write+0xab/0x1b0
    ksys_write+0x55/0xc0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x5a/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20190618124352.28307-1-colin.king@canonical.com
Fixes: 33c3fc71c8cf ("mm: introduce idle page tracking")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initramfs: fix populate_initrd_image() section mismatch

With gcc-4.6.3:

    WARNING: vmlinux.o(.text.unlikely+0x140): Section mismatch in reference from the function populate_initrd_image() to the variable .init.ramfs.info:__initramfs_size
    The function populate_initrd_image() references
    the variable __init __initramfs_size.
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of __initramfs_size is wrong.

    WARNING: vmlinux.o(.text.unlikely+0x14c): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:unpack_to_rootfs()
    The function populate_initrd_image() references
    the function __init unpack_to_rootfs().
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of unpack_to_rootfs is wrong.

    WARNING: vmlinux.o(.text.unlikely+0x198): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:xwrite()
    The function populate_initrd_image() references
    the function __init xwrite().
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of xwrite is wrong.

Indeed, if the compiler decides not to inline populate_initrd_image(), a
warning is generated.

Fix this by adding the missing __init annotations.

Link: http://lkml.kernel.org/r/20190617074340.12779-1-geert@linux-m68k.org
Fixes: 7c184ecd262fe64f ("initramfs: factor out a helper to populate the initrd image")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/oom_kill.c: fix uninitialized oc->constraint

In dump_oom_summary() oc->constraint is used to show oom_constraint_text,
but it hasn't been set before.  So the value of it is always the default
value 0.  We should inititialize it before.

Bellow is the output when memcg oom occurs,

before this patch:
  oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=7997,uid=0

after this patch:
  oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=13681,uid=0

Link: http://lkml.kernel.org/r/1560522038-15879-1-git-send-email-laoar.shao@gmail.com
Fixes: ef8444ea01d7 ("mm, oom: reorganize the oom report in dump_header")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wind Yu <yuzhoujian@didichuxing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge

madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled.  That was caused by the
suboptimal code in current soft-offline code.  See the following part:

    ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
                            MIGRATE_SYNC, MR_MEMORY_FAILURE);
    if (ret) {
            ...
    } else {
            /*
             * We set PG_hwpoison only when the migration source hugepage
             * was successfully dissolved, because otherwise hwpoisoned
             * hugepage remains on free hugepage list, then userspace will
             * find it as SIGBUS by allocation failure. That's not expected
             * in soft-offlining.
             */
            ret = dissolve_free_huge_page(page);
            if (!ret) {
                    if (set_hwpoison_free_buddy_page(page))
                            num_poisoned_pages_inc();
            }
    }
    return ret;

Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds.  So that means
current code gives up offlining too early now.

dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.

This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.

[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink:
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails

The pass/fail of soft offline should be judged by checking whether the
raw error page was finally contained or not (i.e. the result of
set_hwpoison_free_buddy_page()), but current code do not work like
that. It might lead us to misjudge the test result when
set_hwpoison_free_buddy_page() fails.

Without this fix, there are cases where madvise(MADV_SOFT_OFFLINE) may
not offline the original page and will not return an error.

Link: http://lkml.kernel.org/r/1560154686-18497-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signal: remove the wrong signal_pending() check in restore_user_sigmask()

This is the minimal fix for stable, I'll send cleanups later.

Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.

Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.

Eric said:

: For clarity.  I don't think this is required by posix, or fundamentally to
: remove the races in select.  It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented.  The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?

Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_flat.c: make load_flat_shared_library() work

load_flat_shared_library() is broken: It only calls load_flat_file() if
prepare_binprm() returns zero, but prepare_binprm() returns the number of
bytes read - so this only happens if the file is empty.

Instead, call into load_flat_file() if the number of bytes read is
non-negative. (Even if the number of bytes is zero - in that case,
load_flat_file() will see nullbytes and return a nice -ENOEXEC.)

In addition, remove the code related to bprm creds and stop using
prepare_binprm() - this code is loading a library, not a main executable,
and it only actually uses the members "buf", "file" and "filename" of the
linux_binprm struct. Instead, call kernel_read() directly.

Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com
Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask

mpol_rebind_nodemask() is called for MPOL_BIND and MPOL_INTERLEAVE
mempoclicies when the tasks's cpuset's mems_allowed changes.  For
policies created without MPOL_F_STATIC_NODES or MPOL_F_RELATIVE_NODES,
it works by remapping the policy's allowed nodes (stored in v.nodes)
using the previous value of mems_allowed (stored in
w.cpuset_mems_allowed) as the domain of map and the new mems_allowed
(passed as nodes) as the range of the map (see the comment of
bitmap_remap() for details).

The result of remapping is stored back as policy's nodemask in v.nodes,
and the new value of mems_allowed should be stored in
w.cpuset_mems_allowed to facilitate the next rebind, if it happens.

However, 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies
when updating cpusets") introduced a bug where the result of remapping
is stored in w.cpuset_mems_allowed instead.  Thus, a mempolicy's
allowed nodes can evolve in an unexpected way after a series of
rebinding due to cpuset mems_allowed changes, possibly binding to a
wrong node or a smaller number of nodes which may e.g.  overload them.
This patch fixes the bug so rebinding again works as intended.

[vbabka@suse.cz: new changlog]
Link: http://lkml.kernel.org/r/ef6a69c6-c052-b067-8f2c-9d615c619bb9@suse.cz
Link: http://lkml.kernel.org/r/1558768043-23184-1-git-send-email-zhongjiang@huawei.com
Fixes: 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies when updating cpusets")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/array.c: allow reporting eip/esp for all coredumping threads

0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat")
stopped reporting eip/esp and fd7d56270b52 ("fs/proc: Report eip/esp in
/prod/PID/stat for coredumping") reintroduced the feature to fix a
regression with userspace core dump handlers (such as minicoredumper).

Because PF_DUMPCORE is only set for the primary thread, this didn't fix
the original problem for secondary threads.  Allow reporting the eip/esp
for all threads by checking for PF_EXITING as well.  This is set for all
the other threads when they are killed.  coredump_wait() waits for all the
tasks to become inactive before proceeding to invoke a core dumper.

Link: http://lkml.kernel.org/r/87y32p7i7a.fsf@linutronix.de
Link: http://lkml.kernel.org/r/20190522161614.628-1-jlu@pengutronix.de
Fixes: fd7d56270b526ca3 ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Jan Luebbe <jlu@pengutronix.de>
Tested-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address

The presence of struct page does not guarantee linear mapping for the pfn
physical range. Device private memory which is non-coherent is excluded
from linear mapping during devm_memremap_pages() though they will still
have struct page coverage.

Change pfn_t_to_virt() to just check for device private memory before
giving out virtual address for a given pfn.

pfn_t_to_virt() actually has no callers. Let's fix it for the 5.2 kernel
and remove it in 5.3.

Link: http://lkml.kernel.org/r/1558089514-25067-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/panfrost: Fix a double-free error

drm_gem_shmem_create_with_handle() returns a GEM object and attach a
handle to it. When the user closes the DRM FD, the core releases all
GEM handles along with their backing GEM objs, which can lead to a
double-free issue if panfrost_ioctl_create_bo() failed and went
through the err_free path where drm_gem_object_put_unlocked() is
called without deleting the associate handle.

Replace this drm_gem_object_put_unlocked() call by a
drm_gem_handle_delete() one to fix that.

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627172414.27231-1-boris.brezillon@collabora.com

tracing/snapshot: Resize spare buffer if size changed

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com
Cc: stable@vger.kernel.org
Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix memory leak in tracing_err_log_open()

When tracing_err_log_open() calls seq_open(), allocated memory is not freed.

kmemleak report:

unreferenced object 0xffff92c0781d1100 (size 128):
  comm "tail", pid 15116, jiffies 4295163855 (age 22.704s)
  hex dump (first 32 bytes):
    00 f0 08 e5 c0 92 ff ff 00 10 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000d0687d5>] kmem_cache_alloc+0x11f/0x1e0
    [<000000003e3039a8>] seq_open+0x2f/0x90
    [<000000008dd36b7d>] tracing_err_log_open+0x67/0x140
    [<000000005a431ae2>] do_dentry_open+0x1df/0x3a0
    [<00000000a2910603>] vfs_open+0x2f/0x40
    [<0000000038b0a383>] path_openat+0x2e8/0x1690
    [<00000000fe025bda>] do_filp_open+0x9b/0x110
    [<00000000483a5091>] do_sys_open+0x1ba/0x260
    [<00000000c558b5fd>] __x64_sys_openat+0x20/0x30
    [<000000006881ec07>] do_syscall_64+0x5a/0x130
    [<00000000571c2e94>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling seq_release() in tracing_err_log_fops.release().

Link: http://lkml.kernel.org/r/20190628105640.GA1863@DESKTOP
Fixes: 8a062902be725 ("tracing: Add tracing error log")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()

Taking the text_mutex in ftrace_arch_code_modify_prepare() is to fix a
race against module loading and live kernel patching that might try to
change the text permissions while ftrace has it as read/write. This
really needs to be documented in the code. Add a comment that does such.

Link: http://lkml.kernel.org/r/20190627211819.5a591f52@gandalf.local.home
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()

The commit 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module text
permissions race") causes a possible deadlock between register_kprobe()
and ftrace_run_update_code() when ftrace is using stop_machine().

The existing dependency chain (in reverse order) is:

-> #1 (text_mutex){+.+.}:
       validate_chain.isra.21+0xb32/0xd70
       __lock_acquire+0x4b8/0x928
       lock_acquire+0x102/0x230
       __mutex_lock+0x88/0x908
       mutex_lock_nested+0x32/0x40
       register_kprobe+0x254/0x658
       init_kprobes+0x11a/0x168
       do_one_initcall+0x70/0x318
       kernel_init_freeable+0x456/0x508
       kernel_init+0x22/0x150
       ret_from_fork+0x30/0x34
       kernel_thread_starter+0x0/0xc

-> #0 (cpu_hotplug_lock.rw_sem){++++}:
       check_prev_add+0x90c/0xde0
       validate_chain.isra.21+0xb32/0xd70
       __lock_acquire+0x4b8/0x928
       lock_acquire+0x102/0x230
       cpus_read_lock+0x62/0xd0
       stop_machine+0x2e/0x60
       arch_ftrace_update_code+0x2e/0x40
       ftrace_run_update_code+0x40/0xa0
       ftrace_startup+0xb2/0x168
       register_ftrace_function+0x64/0x88
       klp_patch_object+0x1a2/0x290
       klp_enable_patch+0x554/0x980
       do_one_initcall+0x70/0x318
       do_init_module+0x6e/0x250
       load_module+0x1782/0x1990
       __s390x_sys_finit_module+0xaa/0xf0
       system_call+0xd8/0x2d0

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(text_mutex);
                               lock(cpu_hotplug_lock.rw_sem);
                               lock(text_mutex);
  lock(cpu_hotplug_lock.rw_sem);

It is similar problem that has been solved by the commit 2d1e38f56622b9b
("kprobes: Cure hotplug lock ordering issues"). Many locks are involved.
To be on the safe side, text_mutex must become a low level lock taken
after cpu_hotplug_lock.rw_sem.

This can't be achieved easily with the current ftrace design.
For example, arm calls set_all_modules_text_rw() already in
ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c.
This functions is called:

  + outside stop_machine() from ftrace_run_update_code()
  + without stop_machine() from ftrace_module_enable()

Fortunately, the problematic fix is needed only on x86_64. It is
the only architecture that calls set_all_modules_text_rw()
in ftrace path and supports livepatching at the same time.

Therefore it is enough to move text_mutex handling from the generic
kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c:

   ftrace_arch_code_modify_prepare()
   ftrace_arch_code_modify_post_process()

This patch basically reverts the ftrace part of the problematic
commit 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module
text permissions race"). And provides x86_64 specific-fix.

Some refactoring of the ftrace code will be needed when livepatching
is implemented for arm or nds32. These architectures call
set_all_modules_text_rw() and use stop_machine() at the same time.

Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com
Fixes: 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module text permissions race")
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
[
  As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of
  ftrace_run_update_code() as it is a void function.
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O

Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.

Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

SUNRPC: Fix up calculation of client message length

In the case where a record marker was used, xs_sendpages() needs
to return the length of the payload + record marker so that we
operate correctly in the case of a partial transmission.
When the callers check return value, they therefore need to
take into account the record marker length.

Fixes: 06b5fc3ad94e ("Merge tag 'nfs-rdma-for-5.1-1'...")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

ALSA: seq: fix incorrect order of dest_client/dest_ports arguments

There are two occurrances of a call to snd_seq_oss_fill_addr where
the dest_client and dest_port arguments are in the wrong order. Fix
this by swapping them around.

Addresses-Coverity: ("Arguments in wrong order")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek - Change front mic location for Lenovo M710q

On M710q Lenovo ThinkCentre machine, there are two front mics,
we change the location for one of them to avoid conflicts.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

drm/etnaviv: add missing failure path to destroy suballoc

When something goes wrong in the GPU init after the cmdbuf suballocator
has been constructed, we fail to destroy it properly. This causes havok
later when the GPU is unbound due to a module unload or similar.

Fixes: e66774dd6f6a (drm/etnaviv: add cmdbuf suballocator)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>

ALSA: usb-audio: fix sign unintended sign extension on left shifts

There are a couple of left shifts of unsigned 8 bit values that
first get promoted to signed ints and hence get sign extended
on the shift if the top bit of the 8 bit values are set. Fix
this by casting the 8 bit values to unsigned ints to stop the
unintentional sign extension.

Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

cifs: fix crash querying symlinks stored as reparse-points

We never parsed/returned any data from .get_link() when the object is a windows reparse-point
containing a symlink. This results in the VFS layer oopsing accessing an uninitialized buffer:

...
[  171.407172] Call Trace:
[  171.408039]  readlink_copy+0x29/0x70
[  171.408872]  vfs_readlink+0xc1/0x1f0
[  171.409709]  ? readlink_copy+0x70/0x70
[  171.410565]  ? simple_attr_release+0x30/0x30
[  171.411446]  ? getname_flags+0x105/0x2a0
[  171.412231]  do_readlinkat+0x1b7/0x1e0
[  171.412938]  ? __ia32_compat_sys_newfstat+0x30/0x30
...

Fix this by adding code to handle these buffers and make sure we do return a valid buffer
to .get_link()

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo

Merge tag 'for-5.2/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix incorrect uses of kstrndup and DM logging macros in DM's early
   init code.

- Fix DM log-writes target's handling of super block sectors so updates
   are made in order through use of completion.

- Fix DM core's argument splitting code to avoid undefined behaviour
   reported as a side-effect of UBSAN analysis on ppc64le.

- Fix DM verity target to limit the amount of error messages that can
   result from a corrupt block being found.

* tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: use message limit for data block corruption message
  dm table: don't copy from a NULL pointer in realloc_argv()
  dm log writes: make sure super sector log updates are written in order
  dm init: remove trailing newline from calls to DMERR() and DMINFO()
  dm init: fix incorrect uses of kstrndup()

Merge tag 'for-linus-20190627' of gitolite.pub/scm/linux/kernel/git/brauner/linux

Pull pidfd fixes from Christian Brauner:
"Userspace tools and libraries such as strace or glibc need a cheap and
  reliable way to tell whether CLONE_PIDFD is supported. The easiest way
  is to pass an invalid fd value in the return argument, perform the
  syscall and verify the value in the return argument has been changed
  to a valid fd.

  However, if CLONE_PIDFD is specified we currently check if pidfd == 0
  and return EINVAL if not.

  The check for pidfd == 0 was originally added to enable us to abuse
  the return argument for passing additional flags along with
  CLONE_PIDFD in the future.

  However, extending legacy clone this way would be a terrible idea and
  with clone3 on the horizon and the ability to reuse CLONE_DETACHED
  with CLONE_PIDFD there's no real need for this clutch. So remove the
  pidfd == 0 check and help userspace out.

  Also, accordig to Al, anon_inode_getfd() should only be used past the
  point of no failure and ksys_close() should not be used at all since
  it is far too easy to get wrong. Al's motto being "basically, once
  it's in descriptor table, it's out of your control". So Al's patch
  switches back to what we already had in v1 of the original patchset
  and uses a anon_inode_getfile() + put_user() + fd_install() sequence
  in the success path and a fput() + put_unused_fd() in the failure
  path.

  The other two changes should be trivial"

* tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  proc: remove useless d_is_dir() check
  copy_process(): don't use ksys_close() on cleanups
  samples: make pidfd-metadata fail gracefully on older kernels
  fork: don't check parent_tidptr with CLONE_PIDFD

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- fix for one corner case in HID++ protocol with respect to handling
   very long reports, from Hans de Goede

- power management fix in Intel-ISH driver, from Hyungwoo Yang

- use-after-free fix in Intel-ISH driver, from Dan Carpenter

- a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
   Oleksandr Natalenko

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: fix wrong driver_data usage
  HID: multitouch: Add pointstick support for ALPS Touchpad
  HID: logitech-dj: Fix forwarding of very long HID++ reports
  HID: uclogic: Add support for Huion HS64 tablet
  HID: chicony: add another quirk for PixArt mouse
  HID: intel-ish-hid: Fix a use after free in load_fw_from_host()

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
"A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

Merge tag 'afs-fixes-20190620' of git://git./linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
"The in-kernel AFS client has been undergoing testing on opendev.org on
  one of their mirror machines. They are using AFS to hold data that is
  then served via apache, and Ian Wienand had reported seeing oopses,
  spontaneous machine reboots and updates to volumes going missing. This
  patch series appears to have fixed the problem, very probably due to
  patch (2), but it's not 100% certain.

  (1) Fix the printing of the "vnode modified" warning to exclude checks
      on files for which we don't have a callback promise from the
      server (and so don't expect the server to tell us when it
      changes).

      Without this, for every file or directory for which we still have
      an in-core inode that gets changed on the server, we may get a
      message logged when we next look at it. This can happen in bulk
      if, for instance, someone does "vos release" to update a R/O
      volume from a R/W volume and a whole set of files are all changed
      together.

      We only really want to log a message if the file changed and the
      server didn't tell us about it or we failed to track the state
      internally.

  (2) Fix accidental corruption of either afs_vlserver struct objects or
      the the following memory locations (which could hold anything).
      The issue is caused by a union that points to two different
      structs in struct afs_call (to save space in the struct). The call
      cleanup code assumes that it can simply call the cleanup for one
      of those structs if not NULL - when it might be actually pointing
      to the other struct.

      This means that every Volume Location RPC op is going to corrupt
      something.

  (3) Fix an uninitialised spinlock. This isn't too bad, it just causes
      a one-off warning if lockdep is enabled when "vos release" is
      called, but the spinlock still behaves correctly.

  (4) Fix the setting of i_block in the inode. This causes du, for
      example, to produce incorrect results, but otherwise should not be
      dangerous to the kernel"

* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix setting of i_blocks
  afs: Fix uninitialised spinlock afs_volume::cb_break_lock
  afs: Fix vlserver record corruption
  afs: Fix over zealous "vnode modified" warnings

Merge tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux

Pull arch/csky fixup from Guo Ren:
"A fixup patch for rt_sigframe in signal.c"

* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
csky: Fixup libgcc unwind error

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.

2) Fix TX completion to be finite, from Sergej Benilov.

3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
    Long.

4) Double free of TX cleanup in Dirk van der Merwe.

5) Memory leak in packet_set_ring(), from Eric Dumazet.

6) Out of bounds read in qmi_wwan, from Bjørn Mork.

7) Fix iif used in mcast/bcast looped back packets, from Stephen
    Suryaputra.

8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
  sctp: change to hold sk after auth shkey is created successfully
  ipv6: fix neighbour resolution with raw socket
  ipv6: constify rt6_nexthop()
  net: dsa: microchip: Use gpiod_set_value_cansleep()
  net: aquantia: fix vlans not working over bridged network
  ipv4: reset rt_iif for recirculated mcast/bcast out pkts
  team: Always enable vlan tx offload
  net/smc: Fix error path in smc_init
  net/smc: hold conns_lock before calling smc_lgr_register_conn()
  bonding: Always enable vlan tx offload
  net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
  ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
  qmi_wwan: Fix out-of-bounds read
  tipc: check msg->req data len in tipc_nl_compat_bearer_disable
  net: macb: do not copy the mac address if NULL
  net/packet: fix memory leak in packet_set_ring()
  net/tls: fix page double free on TX cleanup
  net/sched: cbs: Fix error path of cbs_module_init
  tipc: change to use register_pernet_device
  ...

x86/unwind/orc: Fall back to using frame pointers for generated code

The ORC unwinder can't unwind through BPF JIT generated code because
there are no ORC entries associated with the code.

If an ORC entry isn't available, try to fall back to frame pointers. If
BPF and other generated code always do frame pointer setup (even with
CONFIG_FRAME_POINTERS=n) then this will allow ORC to unwind through most
generated code despite there being no corresponding ORC entries.

Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/b6f69208ddff4343d56b7bfac1fc7cfcd62689e8.1561595111.git.jpoimboe@redhat.com

perf/x86: Always store regs->ip in perf_callchain_kernel()

The stacktrace_map_raw_tp BPF selftest is failing because the RIP saved by
perf_arch_fetch_caller_regs() isn't getting saved by perf_callchain_kernel().

This was broken by the following commit:

d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")

With that change, when starting with non-HW regs, the unwinder starts
with the current stack frame and unwinds until it passes up the frame
which called perf_arch_fetch_caller_regs(). So regs->ip needs to be
saved deliberately.

Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/3975a298fa52b506fea32666d8ff6a13467eee6d.1561595111.git.jpoimboe@redhat.com