drm/ttm: remove special handling for non GEM drivers

vmwgfx is the only driver actually using this. Move the handling into
the driver instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419092853.1605-1-christian.koenig@amd.com

drm/ttm: fix error handling if no BO can be swapped out v4

In case that all pre-allocated BOs are busy, just continue to populate
BOs since likely half of system memory in total is still free.

v4 (chk): fix code moved to VMWGFX as well

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422115757.3946-1-christian.koenig@amd.com

drm: bridge: adv7511: Support I2S IEC958 encoded PCM format

Support IEC958 encoded PCM format for ADV7511 so that ADV7511 HDMI
audio driver can accept the IEC958 data from the I2S input.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422064015.15285-1-jee.heng.sia@intel.com

drm/ttm/ttm_device: Demote kernel-doc abuses

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_device.c:42: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX'
 drivers/gpu/drm/ttm/ttm_device.c:42: warning: expecting prototype for ttm_global_mutex(). Prototype was for DEFINE_MUTEX() instead
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'ctx' not described in 'ttm_global_swapout'
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'gfp_flags' not described in 'ttm_global_swapout'
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: expecting prototype for A buffer object shrink method that tries to swap out the first(). Prototype was for ttm_global_swapout() instead

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-28-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/scheduler/sched_entity: Fix some function name disparity

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/scheduler/sched_entity.c:204: warning: expecting prototype for drm_sched_entity_kill_jobs(). Prototype was for drm_sched_entity_kill_jobs_cb() instead
 drivers/gpu/drm/scheduler/sched_entity.c:262: warning: expecting prototype for drm_sched_entity_cleanup(). Prototype was for drm_sched_entity_fini() instead
 drivers/gpu/drm/scheduler/sched_entity.c:305: warning: expecting prototype for drm_sched_entity_fini(). Prototype was for drm_sched_entity_destroy() instead

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-25-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm/ttm_bo: Fix incorrectly documented function 'ttm_bo_cleanup_refs'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_bo.c:293: warning: expecting prototype for function ttm_bo_cleanup_refs(). Prototype was for ttm_bo_cleanup_refs() instead

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-24-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm: drm_connector.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0200474fbdb1149856308bccb8e467415f0b3d99.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_blend.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/f441188f84aac2f9f72f36a42c88623b16cd1f87.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_atomic_uapi.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/dc8286f5590fff609f924845fb622dd5f962a11b.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_context.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/341b1ae1475fad22035cf3ff11df73cd49063d4c.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_connector.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/59abdb2d65a643d5937e5773db684b926e8c9233.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_bufs.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c3a261994b88f6fc39f69ee8c1af8ab115d76a87.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_auth.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cd1e8f6637b914825ee4b9643a4e9d9eba49f276.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_atomic.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/387b6b852a72d6a98133cead5e4d0e3c39dd5094.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm/todo: Add link to old debugfs RFC

I always forget where it was, store it until this gets picked up by an
internship again.

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421152911.1871473-1-daniel.vetter@ffwll.ch

drm/gma500: remove trailing whitespaces

Remove trailing whitespaces.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419081807.68000-2-krzysztof.kozlowski@canonical.com

drm/gma500: correct kerneldoc

Correct kerneldoc (remove wrong /** marker and adjust function name) to
fix W=1 warnings:

  drivers/gpu/drm/gma500/cdv_intel_lvds.c:27: warning:
    expecting prototype for LVDS I2C backlight control macros(). Prototype was for BRIGHTNESS_MAX_LEVEL() instead

  drivers/gpu/drm/gma500/intel_gmbus.c:386: warning:
    expecting prototype for intel_gmbus_setup(). Prototype was for gma_intel_setup_gmbus() instead

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419081807.68000-1-krzysztof.kozlowski@canonical.com

MAINTAINERS: add it66121 HDMI bridge driver entry

Add Neil Armstrong and myself as maintainers

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-4-narmstrong@baylibre.com

drm: bridge: add it66121 driver

This commit is a simple driver for bridge HMDI it66121.
The input format is RBG and there is no color conversion.
Audio, HDCP and CEC are not supported yet.

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com

dt-bindings: display: bridge: add it66121 bindings

Add the ITE bridge HDMI it66121 bindings.

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-2-narmstrong@baylibre.com

drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare

Unpreparing and re-preparing a panel can be a really heavy
operation. Panels datasheets often specify something on the order of
500ms as the delay you should insert after turning off the panel
before turning it on again. In addition, turning on a panel can have
delays on the order of 100ms - 200ms before the panel will assert HPD
(AKA "panel ready"). The above means that we should avoid turning a
panel off if we're going to turn it on again shortly.

The above becomes a problem when we want to read the EDID of a
panel. The way that ordering works is that userspace wants to read the
EDID of the panel _before_ fully enabling it so that it can set the
initial mode correctly. However, we can't read the EDID until we power
it up. This leads to code that does this dance (like
ps8640_bridge_get_edid()):

1. When userspace requests EDID / the panel modes (through an ioctl),
   we power on the panel just enough to read the EDID and then power
   it off.
2. Userspace then turns the panel on.

There's likely not much time between step #1 and #2 and so we want to
avoid powering the panel off and on again between those two steps.

Let's use Runtime PM to help us. We'll move the existing prepare() and
unprepare() to be runtime resume() and runtime suspend(). Now when we
want to prepare() or unprepare() we just increment or decrement the
refcount. We'll default to a 1 second autosuspend delay which seems
sane given the typical delays we see for panels.

A few notes:
- It seems the existing unprepare() and prepare() are defined to be
  no-ops if called extra times. We'll preserve that behavior but may
  try to remove it in a future patch.
- This is a slight change in the ABI of simple panel. If something was
  absolutely relying on the unprepare() to happen instantly that
  simply won't be the case anymore. I'm not aware of anyone relying on
  that behavior, but if there is someone then we'll need to figure out
  how to enable (or disable) this new delayed behavior selectively.
- In order for this to work we now have a hard dependency on
  "PM". From memory this is a legit thing to assume these days and we
  don't have to find some fallback to keep working if someone wants to
  build their system without "PM".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid

drm/bridge: ti-sn65dsi86: Get rid of the useless detect() function

If we just leave the detect() function as NULL then the upper layers
assume we're always connected. There's no reason for a stub.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.6.I826adf4faeb7f39f560b387f6b380e639c6986c8@changeid

drm/bridge: ti-sn65dsi86: Move drm_panel_unprepare() to post_disable()

We prepared the panel in pre_enable() so we should unprepare it in
post_disable() to match.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.5.Ia75c9ffe2a2582393a8532d244da86f18b4c9b21@changeid

drm/bridge: ti-sn65dsi86: Reorder remove()

Let's make the remove() function strictly the reverse of the probe()
function so it's easier to reason about.

This patch was created by code inspection and should move us closer to
a proper remove.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.4.Ifcf1deaa372eba7eeb4f8eb516c5d15b77a657a9@changeid

drm/bridge: ti-sn65dsi86: Remove incorrectly tagged kerneldoc comment

A random comment inside a function had "/**" in front of it. That
doesn't make sense. Remove.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.3.I167766eeaf4c4646a3934c4dd5332decbab6bd68@changeid

drm/bridge: ti-sn65dsi86: Simplify refclk handling

The clock framework makes it simple to deal with an optional clock.
You can call clk_get_optional() and if the clock isn't specified it'll
just return NULL without complaint. It's valid to pass NULL to
enable/disable/prepare/unprepare. Let's make use of this to simplify
things a tiny bit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.2.Ic9c04f960190faad5290738b2a35d73661862735@changeid

drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()

The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.

Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid

drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver

On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.

Disable it to avoid exposing a non-functinal bus.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com

drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.

On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com

drm/drm_bufs.c: In switch, add break in default case

Added a "break" in the default case of a switch select statement.
GCC complains, although this "break" is not strictly necessary
for the code to work as expected.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210417161552.6571-1-fmdefrancesco@gmail.com

drm/exynos: Don't set allow_fb_modifiers explicitly

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-3-daniel.vetter@ffwll.ch

drm/bridge/sii8620: fix dependency on extcon

The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.

The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.

Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org

drm/amdgpu: check base size instead of mem.num_pages

Drop some ussage of mem in the code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-2-christian.koenig@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/nouveau: use bo->base.size instead of mem->num_pages

Change a couple of cases where it makes more sense to use the base size
instead of the number of pages in the resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-1-christian.koenig@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/ttm: warn stricter about freeing pinned BOs

So far we only warned when the BOs where pinned and not idle.

Also warn if we see a pinned BO in general.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-3-christian.koenig@amd.com

drm/amdgpu: freeing pinned objects is illegal now

We want to drop support in TTM for this.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-2-christian.koenig@amd.com

drm/amdgpu: make sure we unpin the UVD BO

Releasing pinned BOs is illegal now.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-1-christian.koenig@amd.com

drm/imx: Don't set allow_fb_modifiers explicitly

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both dcss and
imx-drm drivers.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch

drm/vc4: Don't set allow_fb_modifiers explicitly

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch

drm/tegra: Don't set allow_fb_modifiers explicitly

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.

Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch

drm/virtio: Create Dumb BOs as guest Blobs (v3)

If support for Blob resources is available, then dumb BOs created
by the driver can be considered as guest Blobs.

v2: Don't skip transfer and flush commands as part of plane update
as the device may have created a shared mapping. (Gerd)

v3: Don't create dumb BOs as Guest blobs if Virgl is enabled. (Gurchetan)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413052614.2486768-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/ttm: Don't count pages in SG BOs against pages_limit

Pages in SG BOs were not allocated by TTM. So don't count them against
TTM's pages limit.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210414064804.29356-9-Felix.Kuehling@amd.com

drm/aperture: Inline fbdev conflict helpers into aperture helpers

Fbdev's helpers for handling conflicting framebuffer drivers are
related to framebuffer apertures, not console emulation. Therefore
remove them from drm_fb_helper.h and inline them into the aperture
helpers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-4-tzimmermann@suse.de

drm/aperture: Convert drivers to aperture interfaces

Mass-convert all drivers from FB helpers to aperture interfaces. No
functional changes besides checking for returned errno codes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de

drm/aperture: Add infrastructure for aperture ownership

Platform devices might operate on firmware framebuffers, such as VESA
or EFI. Before a native driver for the graphics hardware can take over
the device, it has to remove any platform driver that operates on the
firmware framebuffer. Aperture helpers provide the infrastructure for
native drivers to remove the generic ones.

For now, this only concerns generic fbdev drivers. Code for removing
these is provided by drm_fb_helper_remove_conflicting_framebuffers() et
al. Simply wrap these functions for now. At a later point, code can be
added for generic DRM drivers to acquire firmware framebuffers.

v2:
* fix docs for drm_aperture_remove_framebuffers()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de

efifb: Check efifb_pci_dev before using it

On some platforms like Hyper-V and RPi4 with UEFI firmware, efifb is not
a PCI device.

So make sure efifb_pci_dev is found before using it.

Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
BugLink: https://bugs.launchpad.net/bugs/1922403
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413170508.968148-1-kai.heng.feng@canonical.com

drm: bridge: cdns-mhdp8546: Enable HDCP

This patch enable HDCP in MHDP driver.

Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1618078542-30679-1-git-send-email-pthombar@cadence.com

dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP

Add binding changes for HDCP in the MHDP8546 DPI/DP bridge binding.

Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1618078508-30466-1-git-send-email-pthombar@cadence.com

drm: drm_atomic_helper.c: Correct comments format

Corrected comments format in accordance to the Linux style guides.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-3-fmdefrancesco@gmail.com

drm: drm_atomic_helper.c: Replace "unsigned" with "unsigned int"

Replaced "unsigned with "unsigned int" since the latter is preferred.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-2-fmdefrancesco@gmail.com

gpu: drm: Replace bare "unsigned" with "unsigned int"

Replaced the type "unsigned" with "unsigned int" because it is
preferred. Issue detected by checkpatch.pl.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412105309.27156-1-fmdefrancesco@gmail.com

drm/ttm: re-add debugfs tt_shrink file

That got lost when we moved back to a static limit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-2-christian.koenig@amd.com

drm/ttm: fix return value check

The function returns the number of swapped pages here. Only abort when we get
a negative error code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com

drm/qxl: Use drm_gem_ttm_dumb_map_offset()

Qxl now uses drm_gem_ttm_dumb_map_offset() to implement struct
drm_driver.dumb_map_offset.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-5-tzimmermann@suse.de

drm/nouveau: Use drm_gem_ttm_dumb_map_offset()

Nouveau now uses drm_gem_ttm_dumb_map_offset() to implement
struct drm_driver.dumb_map_offset.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-4-tzimmermann@suse.de

drm/vram-helper: Use drm_gem_ttm_dumb_map_offset()

VRAM helpers now use drm_gem_ttm_dumb_map_offset() to implement
struct drm_driver.dumb_map_offset.

v2:
* update hibmc as well (kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-3-tzimmermann@suse.de

drm/gem-ttm-helper: Provide helper for struct drm_driver.dumb_map_offset

Provides an implementation of struct drm_driver.dumb_map_offset that
can be used by TTM-based GEM drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-2-tzimmermann@suse.de

drm/ttm: make global mutex and use count static

Only needed during device hot plug and remove and not exported.

Signed-off-by: Christian König <christian.koenig@amd.com>
Suggested-by: Bernard <bernard@vivo.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409110730.2958-1-christian.koenig@amd.com

drm/panel: Convert sysfs sprintf/snprintf family to sysfs_emit

Fix the following coccicheck warning:
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING:
use scnprintf or sprintf

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com

drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()

Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com

drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()

Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.

However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.

So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.

v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-8-lyude@redhat.com

drm/tegra: Don't register DP AUX channels before connectors

As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.

Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com

drm/dp: Fixup kernel docs for struct drm_dp_aux

* Make sure that struct members are referred to using @, otherwise they
  won't be formatted as such
* Make sure to refer to other struct types using & so they link back to
  each struct's definition
* Make sure to precede constant values with % so they're formatted
  correctly

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-2-lyude@redhat.com

drm/sched: add missing member documentation

Just fix a warning.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f2f12eb9c32b ("drm/scheduler: provide scheduler score externally")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401125213.138855-1-christian.koenig@amd.com

gma500: Use DEFINE_SPINLOCK() for spinlock

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617710114-48071-1-git-send-email-huangguobin4@huawei.com

drm/drm_internal.h: Remove repeated struct declaration

struct drm_gem_object is declared twice. One is declared
at 40th line. The blew one is not needed. Remove the duplicate.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401081704.1000863-1-wanjiabing@vivo.com

drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()

The dp->train_set[] for this driver is only two characters, not four so
this memsets too much.  Fortunately, this ends up corrupting a struct
hole and not anything important.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda

drm/bridge: fix typo in Kconfig

fix 's/controller/controllers/'

in the sentence:
Most display controller handle display connectors...

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-2-dafna.hirschfeld@collabora.com

drm/ttm: ioremap buffer according to TTM mem caching setting

If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.

This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm: Ignore signaled move fences

Move fences that have already signaled should not prevent memory
allocations with no_wait_gpu.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210227034524.21763-1-Felix.Kuehling@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/syncobj: use newly allocated stub fences

Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.

When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.

When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/bridge: lt8912b: Add header file <linux/gpio/consumer.h>

If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c

drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
  gpiod_set_value_cansleep(lt->gp_reset, 0);
  ^~~~~~~~~~~~~~~~~~~~~~~~
  gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
             ^~~~~~~~~~~~~~~~~~~~~~~
             devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
                                                   ^~~~~~~~~~~~~~
                                                   GPIOF_INIT_HIGH

Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com

drm/vblank: Do not store a new vblank timestamp in drm_vblank_restore()

drm_vblank_restore() exists because certain power saving states
can clobber the hardware frame counter. The way it does this is
by guesstimating how many frames were missed purely based on
the difference between the last stored timestamp vs. a newly
sampled timestamp.

If we should call this function before a full frame has
elapsed since we sampled the last timestamp we would end up
with a possibly slightly different timestamp value for the
same frame. Currently we will happily overwrite the already
stored timestamp for the frame with the new value. This
could cause userspace to observe two different timestamps
for the same frame (and the timestamp could even go
backwards depending on how much error we introduce when
correcting the timestamp based on the scanout position).

To avoid that let's not update the stored timestamp at all,
and instead we just fix up the last recorded hw vblank counter
value such that the already stored timestamp/seq number will
match. Thus the next time a vblank irq happens it will calculate
the correct diff between the current and stored hw vblank counter
values.

Sidenote: Another possible idea that came to mind would be to
do this correction only if the power really was removed since
the last time we sampled the hw frame counter. But to do that
we would need a robust way to detect when it has occurred. Some
possibilities could involve some kind of hardare power well
transition counter, or potentially we could store a magic value
in a scratch register that lives in the same power well. But
I'm not sure either of those exist, so would need an actual
investigation to find out. All of that is very hardware specific
of course, so would have to be done in the driver code.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Refuse to create zero width/height cmdline modes

If the user specifies zero width/height cmdline mode i915 will
blow up as the fbdev path will bypass the regular fb sanity
check that would otherwise have refused to create a framebuffer
with zero width/height.

The reason I thought to try this is so that I can force a specific
depth for fbdev without actually having to hardcode the mode
on the kernel cmdline. Eg. if I pass video=0x0-8 I will get an
8bpp framebuffer at my monitor's native resolution.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607162611.23514-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers: gpu: drm: bridge: fix kconfig dependency on DRM_KMS_HELPER

When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
  Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
  Selected by [y]:
  - DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]

This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE,
without depending on or selecting DRM_KMS_HELPER,
despite that config option depending on DRM_KMS_HELPER.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com

drm/komeda: Fix bit check to import to value of proper type

Another issue found by KASAN. The bit finding is buried inside the
dp_for_each_set_bit() macro (that passes on to for_each_set_bit() that
calls the bit stuff. These bit functions want an unsigned long pointer
as input and just dumbly casting leads to out-of-bounds accesses.
This fixes that.

Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204131102.68658-1-carsten.haitzler@foss.arm.com

drm/komeda: Convert sysfs sprintf/snprintf family to sysfs_emit

Fix the following coccicheck warning:
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:97:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:88:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:65:8-16: WARNING:
use scnprintf or sprintf

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617067518-31091-1-git-send-email-tiantao6@hisilicon.com

drm/bridge: anx7625: disable regulators when power off

When suspending the driver, anx7625_power_standby() will be called to
turn off reset-gpios and enable-gpios. However, power supplies are not
disabled. To save power, the driver can get the power supply regulators
and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-2-hsinyi@chromium.org

dt-bindings: drm/bridge: anx7625: Add power supplies

anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-1-hsinyi@chromium.org

drm/displayid: rename displayid_hdr to displayid_header

Avoid any confusion with High Dynamic Range. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ce083bd2789c7e22a91710726162287db88e3f6c.1617024940.git.jani.nikula@intel.com

drm/displayid: allow data blocks with 0 payload length

The DisplayID specifications explicitly call out 0 as a valid payload
length for data blocks. The mere presence of a data block, or the
information coded in the block specific data (bits 7:3 in offset 1), may
be enough to convey the necessary information.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d562dff99ba7c92accb654a99b433bed471e8507.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for tile info

Neatly reduce displayid boilerplate in code. Remove excessive debug
logging while at it, no other functional changes.

The old displayid iterator becomes unused; remove it as well as make
drm_find_displayid_extension() static.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fa4b5c790b5bdd82063545a6f209f8e9d78a63a7.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for finding CEA extension

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e50f876cecbfee369da887ad19350eee0d89b87f.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for detailed modes

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f6c69c545c553c4a616887540660a4b8aecf0f7f.1617024940.git.jani.nikula@intel.com

drm/displayid: add new displayid section/block iterators

Iterating DisplayID blocks across sections (in EDID extensions) is
unnecessarily complicated for the caller. Implement DisplayID iterators
to go through all blocks in all sections.

Usage example:

const struct displayid_block *block;
struct displayid_iter iter;

displayid_iter_edid_begin(edid, &iter);
displayid_iter_for_each(block, &iter) {
/* operate on block */
}
displayid_iter_end(&iter);

When DisplayID is stored in EDID extensions, the DisplayID sections map
to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID
as an EDID Extension. This is implemented here.

When DisplayID is stored in its dedicated DDC device 0xA4, according to
VESA E-DDC v1.3, different rules apply for the structure. This is not
implemented here, as we don't currently use it, but the idea is you'd
have a different call for beginning the iteration, for example simply:

displayid_iter_begin(displayid, &iter);

instead of displayid_iter_edid_begin(), and everything else would be
hidden away in the iterator functions.

v2:
- sizeof(struct displayid_block) -> sizeof(*block) (Ville)
- remove __ prefix from displayid_iter_block

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com

drm/displayid: add separate drm_displayid.c

We'll be adding more DisplayID specific functions going forward, so
start off by splitting out a few functions to a separate file.

We don't bother with exporting the functions; at least for now they
should be needed solely within drm.ko.

No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com

drm/edid: make a number of functions, parameters and variables const

If there's no need to change it, it should be const. There's more to be
done, but start off with changes that make follow-up work easier. No
functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41722f92ef81cd6adf65f936fcc5301418e1f94b.1617024940.git.jani.nikula@intel.com

drm/ingenic: Register devm action to cleanup encoders

Since the encoders have been devm-allocated, they will be freed way
before drm_mode_config_cleanup() is called. To avoid use-after-free
conditions, we then must ensure that drm_encoder_cleanup() is called
before the encoders are freed.

v2: Use the new __drmm_simple_encoder_alloc() function

v3: Use the new drmm_plain_simple_encoder_alloc() macro

v4: Use drmm_plain_encoder_alloc() macro

Fixes: c369cb27c267 ("drm/ingenic: Support multiple panels/bridges")
Cc: <stable@vger.kernel.org> # 5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-4-paul@crapouillou.net

drm/encoder: Add macro drmm_plain_encoder_alloc()

This performs the same operation as drmm_encoder_alloc(), but
only allocates and returns a struct drm_encoder instance.

v4: Rename macro drmm_plain_encoder_alloc() and move to
    <drm/drm_encoder.h>. Since it's not "simple" anymore it
    will now take funcs/name arguments as well.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-3-paul@crapouillou.net

drm: bridge/panel: Cleanup connector on bridge detach

If we don't call drm_connector_cleanup() manually in
panel_bridge_detach(), the connector will be cleaned up with the other
DRM objects in the call to drm_mode_config_cleanup(). However, since our
drm_connector is devm-allocated, by the time drm_mode_config_cleanup()
will be called, our connector will be long gone. Therefore, the
connector must be cleaned up when the bridge is detached to avoid
use-after-free conditions.

v2: Cleanup connector only if it was created

v3: Add FIXME

v4: (Use connector->dev) directly in if() block

Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.")
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-2-paul@crapouillou.net

drm/ttm: switch back to static allocation limits for now

The shrinker based approach still has some flaws. Especially that we need
temporary pages to free up the pages allocated to the driver is problematic
in a shrinker.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324134845.2338-1-christian.koenig@amd.com

drm/mst: Enhance MST topology logging

[why]
MST topology print was missing fec logging and pdt printed
as an int wasn't clear. vcpi and payload info was printed as an
arbitrary series of ints which requires user to know the ordering
of the prints, making the logs difficult to use.

[how]
-add fec logging
-add pdt parsing into strings
-format vcpi and payload info into tables with headings
-clean up topology prints
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325180614.37060-1-eryk.brol@amd.com

drm/ttm: fix invalid NULL deref

The BO might be NULL in this function, use the bdev directly.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Fixes: a1f091f8ef2b ("drm/ttm: switch to per device LRU lock")
Link: https://patchwork.freedesktop.org/patch/msgid/20210325152740.82633-1-christian.koenig@amd.com

drm/bridge: Introduce LT8912B DSI to HDMI bridge

Lontium LT8912B is a DSI to HDMI bridge.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com

dt-bindings: display: bridge: Add documentation for LT8912B

Lontium LT8912B is a DSI to HDMI bridge.

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-2-adrien.grassein@gmail.com

drm: Fix 3 typos in the inline doc

Fix the following typos:

1. When mentioning a list of functions, the function
drm_atomic_helper_disable_plane is mentioned twice.

2. drop the word 'afterwards':
s/afterwards after that/after that/'

3. drop extra 'the':
s/but do not the support the full/but do not support the full/

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-1-dafna.hirschfeld@collabora.com

drm/omap: Remove duplicate declaration

struct dss_device has been declared. Remove the duplicate.
And sort these forward declarations alphabetically.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325111028.864628-1-wanjiabing@vivo.com

drm/omap: dsi: Add missing IRQF_ONESHOT

fixed the following coccicheck:
./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com

drm/omap: fix misleading indentation in pixinc()

An old patch added a 'return' statement after each BUG() in this driver,
which was necessary at the time, but has become redundant after the BUG()
definition was updated to handle this properly.

gcc-11 now warns about one such instance, where the 'return' statement
was incorrectly indented:

drivers/gpu/drm/omapdrm/dss/dispc.c: In function ‘pixinc’:
drivers/gpu/drm/omapdrm/dss/dispc.c:2093:9: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation]
 2093 |         else
      |         ^~~~
drivers/gpu/drm/omapdrm/dss/dispc.c:2095:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’
 2095 |                 return 0;
      |                 ^~~~~~

Address this by removing the return again and changing the BUG()
to be unconditional to make this more intuitive.

Fixes: c6eee968d40d ("OMAPDSS: remove compiler warnings when CONFIG_BUG=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322164203.827324-1-arnd@kernel.org

drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge

ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.

It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.

Add bridge driver for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com