selftests/damon: add a test for DAMOS apply intervals

Add a selftest for DAMOS apply intervals.  It runs two schemes having
different apply interval agains an artificial memory access workload, and
check if the scheme with smaller apply interval was applied more
frequently.

Link: https://lkml.kernel.org/r/20240207203134.69976-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/damon: add a test for DAMOS quota

Add a selftest for verifying the DAMOS quota feature.  The test is very
similar to sysfs_update_schemes_tried_regions_wss_estimation.py.  It
starts an artificial workload of 20 MiB working set, run DAMON to find the
working set size, but with 1 MiB/100 ms size quota.  Then, it collect the
DAMON-found working set size every 100 ms and check if the quota was
always applied as expected.  For the confirmation, the tests shows the
stat-applied region size and the qt_exceeds stat.

Link: https://lkml.kernel.org/r/20240207203134.69976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/damon/_damon_sysfs: support DAMOS apply interval

Update the test-purpose DAMON sysfs control Python module to support DAMOS
apply interval.

Link: https://lkml.kernel.org/r/20240207203134.69976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/damon/_damon_sysfs: support DAMOS stats

Update the test-purpose DAMON sysfs control Python module to support DAMOS
stats.

Link: https://lkml.kernel.org/r/20240207203134.69976-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/damon/_damon_sysfs: support DAMOS quota

Patch series "selftests/damon: add more tests for core functionalities and
corner cases".

Continue DAMON selftests' test coverage improvement works with a trivial
improvement of the test code itself.  The sequence of the patches in
patchset is as follows.

The first five patches add two DAMON core functionalities tests.  Those
begins with three patches (patches 1-3) that update the test-purpose DAMON
sysfs interface wrapper to support DAMOS quota, stats, and apply interval
features, respectively.  The fourth patch implements and adds a selftest
for DAMOS quota feature, using the DAMON sysfs interface wrapper's newly
added support of the quota and the stats feature.  The fifth patch further
implements and adds a selftest for DAMOS apply interval using the DAMON
sysfs interface wrapper's newly added support of the apply interval and
the stats feature.

Two patches (patches 6 and 7) for implementing and adding two corner cases
handling selftests follow.  Those try to avoid two previously fixed bugs
from recurring.

Finally, a patch for making DAMON debugfs selftests dependency checker to
use /proc/mounts instead of the hard-coded mount point assumption follows.

This patch (of 8):

Update the test-purpose DAMON sysfs control Python module to support DAMOS
quota.

Link: https://lkml.kernel.org/r/20240207203134.69976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240207203134.69976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memremap.h: correct an error in a comment

It tried to send me off to memory_hotplug.h for an enum that is a few
lines above...

Link: https://lkml.kernel.org/r/dba0f5f01162d6fa16e4da2a9fede7f97080e92d.1707179960.git.john@groves.net
Signed-off-by: John Groves <john@groves.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: use copy_page for full page copy

Some architectures, such as arm, have implemented optimized copy_page for
full page copying.

Replace the full page memcpy with copy_page to take advantage of the
optimization.

Link: https://lkml.kernel.org/r/20231007070554.8657-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/demotion: print demotion targets

Currently, when a demotion occurs, it will prioritize selecting a node
from the preferred targets as the destination node for the demotion.  If
the preferred node does not meet the requirements, it will try from all
the lower memory tier nodes until it finds a suitable demotion destination
node or ultimately fails.

However, the demotion target information isn't exposed to the users,
especially the preferred target information, which relies on more factors.
This makes it hard for users to understand the exact demotion behavior.

Rather than having a new sysfs interface to expose this information,
printing directly to kernel messages, just like the current page
allocation fallback order does.

A dmesg example with this patch is as follows:
[    0.704860] Demotion targets for Node 0: null
[    0.705456] Demotion targets for Node 1: null
// node 2 is onlined
[   32.259775] Demotion targets for Node 0: perferred: 2, fallback: 2
[   32.261290] Demotion targets for Node 1: perferred: 2, fallback: 2
[   32.262726] Demotion targets for Node 2: null
// node 3 is onlined
[   42.448809] Demotion targets for Node 0: perferred: 2, fallback: 2-3
[   42.450704] Demotion targets for Node 1: perferred: 2, fallback: 2-3
[   42.452556] Demotion targets for Node 2: perferred: 3, fallback: 3
[   42.454136] Demotion targets for Node 3: null
// node 4 is onlined
[   52.676833] Demotion targets for Node 0: perferred: 2, fallback: 2-4
[   52.678735] Demotion targets for Node 1: perferred: 2, fallback: 2-4
[   52.680493] Demotion targets for Node 2: perferred: 4, fallback: 3-4
[   52.682154] Demotion targets for Node 3: null
[   52.683405] Demotion targets for Node 4: null
// node 5 is onlined
[   62.931902] Demotion targets for Node 0: perferred: 2, fallback: 2-5
[   62.938266] Demotion targets for Node 1: perferred: 5, fallback: 2-5
[   62.943515] Demotion targets for Node 2: perferred: 4, fallback: 3-4
[   62.947471] Demotion targets for Node 3: null
[   62.949908] Demotion targets for Node 4: null
[   62.952137] Demotion targets for Node 5: perferred: 3, fallback: 3-4

Regarding this requirement, we have previously discussed [1].  The initial
proposal involved introducing a new sysfs interface.  However, due to
concerns about potential changes and compatibility issues with the
interface in the future, a consensus was not reached with the community.
Therefore, this time, we are directly printing out the information.

[1] https://lore.kernel.org/all/d1d5add8-8f4a-4578-8bf0-2cbe79b09989@fujitsu.com/

Link: https://lkml.kernel.org/r/20240206020151.605516-1-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/sysfs: handle 'state' file inputs for every sampling interval if possible

DAMON sysfs interface need to access kdamond-touching data for some of
kdamond user commands.  It uses ->after_aggregation() kdamond callback to
safely access the data in the case.  It had to use the aggregation
interval callback because that was the only callback that users can access
complete monitoring results.

Since patch series "mm/damon: provide pseudo-moving sum based access
rate", which starts from commit 78fbfb155d20 ("mm/damon/core: define and
use a dedicated function for region access rate update"), DAMON provides
good-to-use quality moitoring results for every sampling interval.  It
aims to help users who need to quickly retrieve the monitoring results.
When the aggregation interval is set too long and therefore waiting for
the aggregation interval can degrade user experience, or when the access
pattern is expected to be significantly changed[1] could be such cases.

However, because DAMON sysfs interface is still handling the commands per
aggregation interval, the end user cannot get the benefit.  Update DAMON
sysfs interface to handle kdamond commands for every sampling interval if
applicable.  Specifically, all kdamond data accessing commands except
'commit' command are applicable.

[1] https://lore.kernel.org/r/20240129121316.GA9706@cuiyangpei

Link: https://lkml.kernel.org/r/20240206025158.203097-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: xiongping1 <xiongping1@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb: improve the handling of hugetlb allocation failure for freed or in-use hugetlb

alloc_and_dissolve_hugetlb_folio() preallocates a new hugetlb page before
it takes hugetlb_lock.  In 3 out of 4 cases the page is not really used
and therefore the newly allocated page is just freed right away.  This is
wasteful and it might cause pre-mature failures in those cases.

Address that by moving the allocation down to the only case (hugetlb page
is really in the free pages pool).  We need to drop hugetlb_lock to do so
and therefore need to recheck the page state after regaining it.

The patch is more of a cleanup than an actual fix to an existing problem.
There are no known reports about pre-mature failures.

Link: https://lkml.kernel.org/r/62890fd60b1ecd5bf1cdc476c973f60fe37aa0cb.1707181934.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/migrate: preserve exact soft-dirty state

pte_mkdirty() sets both _PAGE_DIRTY and _PAGE_SOFT_DIRTY bits.  The
_PAGE_SOFT_DIRTY can get set even if it wasn't set on original page before
migration.  This makes non-soft-dirty pages soft-dirty just because of
migration/compaction.  Clear the _PAGE_SOFT_DIRTY flag if it wasn't set on
original page.

By definition of soft-dirty feature, there can be spurious soft-dirty
pages because of kernel's internal activity such as VMA merging or
migration/compaction.  This patch is eliminating the spurious soft-dirty
pages because of migration/compaction.

Link: https://lkml.kernel.org/r/20240206084838.34560-1-usama.anjum@collabora.com
Signed-off-by: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Cc: Michał Mirosław <emmir@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: zswap entry doesn't need refcount anymore

Since we don't need to leave zswap entry on the zswap tree anymore,
we should remove it from tree once we find it from the tree.

Then after using it, we can directly free it, no concurrent path
can find it from tree. Only the shrinker can see it from lru list,
which will also double check under tree lock, so no race problem.

So we don't need refcount in zswap entry anymore and don't need to
take the spinlock for the second time to invalidate it.

The side effect is that zswap_entry_free() maybe not happen in tree
spinlock, but it's ok since nothing need to be protected by the lock.

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-6-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: only support zswap_exclusive_loads_enabled

The !zswap_exclusive_loads_enabled mode will leave compressed copy in
the zswap tree and lru list after the folio swapin.

There are some disadvantages in this mode:
1. It's a waste of memory since there are two copies of data, one is
   folio, the other one is compressed data in zswap. And it's unlikely
   the compressed data is useful in the near future.

2. If that folio is dirtied, the compressed data must be not useful,
   but we don't know and don't invalidate the trashy memory in zswap.

3. It's not reclaimable from zswap shrinker since zswap_writeback_entry()
   will always return -EEXIST and terminate the shrinking process.

On the other hand, the only downside of zswap_exclusive_loads_enabled
is a little more cpu usage/latency when compression, and the same if
the folio is removed from swapcache or dirtied.

More explanation by Johannes on why we should consider exclusive load
as the default for zswap:

  Caching "swapout work" is helpful when the system is thrashing. Then
  recently swapped in pages might get swapped out again very soon. It
  certainly makes sense with conventional swap, because keeping a clean
  copy on the disk saves IO work and doesn't cost any additional memory.

  But with zswap, it's different. It saves some compression work on a
  thrashing page. But the act of keeping compressed memory contributes
  to a higher rate of thrashing. And that can cause IO in other places
  like zswap writeback and file memory.

And the A/B test results of the kernel build in tmpfs with limited memory
can support this theory:

!exclusive exclusive
real                       63.80         63.01
user                       1063.83       1061.32
sys                        290.31        266.15

workingset_refault_anon    2383084.40    1976397.40
workingset_refault_file    44134.00      45689.40
workingset_activate_anon   837878.00     728441.20
workingset_activate_file   4710.00       4085.20
workingset_restore_anon    732622.60     639428.40
workingset_restore_file    1007.00       926.80
workingset_nodereclaim     0.00          0.00
pgscan                     14343003.40   12409570.20
pgscan_kswapd              0.00          0.00
pgscan_direct              14343003.40   12409570.20
pgscan_khugepaged          0.00          0.00

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-5-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: remove duplicate_entry debug value

cat /sys/kernel/debug/zswap/duplicate_entry
2086447

When testing, the duplicate_entry value is very high, but no warning
message in the kernel log.  From the comment of duplicate_entry "Duplicate
store was encountered (rare)", it seems something goes wrong.

Actually it's incremented in the beginning of zswap_store(), which found
its zswap entry has already on the tree.  And this is a normal case, since
the folio could leave zswap entry on the tree after swapin, later it's
dirtied and swapout/zswap_store again, found its original zswap entry.

So duplicate_entry should be only incremented in the real bug case, which
already have "WARN_ON(1)", it looks redundant to count bug case, so this
patch just remove it.

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-4-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: stop lru list shrinking when encounter warm region

When the shrinker encounter an existing folio in swap cache, it means we
are shrinking into the warmer region.  We should terminate shrinking if
we're in the dynamic shrinker context.

This patch add LRU_STOP to support this, to avoid overshrinking.

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-3-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: invalidate zswap entry when swap entry free

During testing I found there are some times the zswap_writeback_entry()
return -ENOMEM, which is not we expected:

bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[-12]: 1563
@[0]: 277221

The reason is that __read_swap_cache_async() return NULL because
swapcache_prepare() failed.  The reason is that we won't invalidate zswap
entry when swap entry freed to the per-cpu pool, these zswap entries are
still on the zswap tree and lru list.

This patch moves the invalidation ahead to when swap entry freed to the
per-cpu pool, since there is no any benefit to leave trashy zswap entry on
the tree and lru list.

With this patch:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[0]: 259744

Note: large folio can't have zswap entry for now, so don't bother
to add zswap entry invalidation in the large folio swap free path.

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-2-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: add more comments in shrink_memcg_cb()

Patch series "mm/zswap: optimize zswap lru list", v2.

This series is motivated when observe the zswap lru list shrinking, noted
there are some unexpected cases in zswap_writeback_entry().

bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'

There are some -ENOMEM because when the swap entry is freed to per-cpu
swap pool, it doesn't invalidate/drop zswap entry.  Then the shrinker
encounter these trashy zswap entries, it can't be reclaimed and return
-ENOMEM.

So move the invalidation ahead to when swap entry freed to the per-cpu
swap pool, since there is no any benefit to leave trashy zswap entries on
the zswap tree and lru list.

Another case is -EEXIST, which is seen more in the case of
!zswap_exclusive_loads_enabled, in which case the swapin folio will leave
compressed copy on the tree and lru list.  And it can't be reclaimed until
the folio is removed from swapcache.

Changing to zswap_exclusive_loads_enabled mode will invalidate when folio
swapin, which has its own drawback if that folio is still clean in
swapcache and swapout again, we need to compress it again.  Please see the
commit for details on why we choose exclusive load as the default for
zswap.

Another optimization for -EEXIST is that we add LRU_STOP to support
terminating the shrinking process to avoid evicting warmer region.

Testing using kernel build in tmpfs, one 50GB swapfile and
zswap shrinker_enabled, with memory.max set to 2GB.

                mm-unstable   zswap-optimize
real               63.90s       63.25s
user             1064.05s     1063.40s
sys               292.32s      270.94s

The main optimization is in sys cpu, about 7% improvement.

This patch (of 6):

Add more comments in shrink_memcg_cb() to describe the deref dance which
is implemented to fix race problem between lru writeback and swapoff, and
the reason why we rotate the entry at the beginning.

Also fix the stale comments in zswap_writeback_entry(), and add more
comments to state that we only deref the tree after we get the swapcache
reference.

Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-0-99d4084260a0@bytedance.com
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-1-99d4084260a0@bytedance.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory tier: make memory_tier_subsys const

Now that the driver core can properly handle constant struct bus_type,
move the memory_tier_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Link: https://lkml.kernel.org/r/20240204-bus_cleanup-mm-v1-1-00f49286f164@marliere.net
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmscan: make too_many_isolated return bool

too_many_isolated() should return bool as does the similar
too_many_isolated() in mm/compaction.c.

Link: https://lkml.kernel.org/r/20240205042618.108140-1-gehao@kylinos.cn
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/cma: make MAX_CMA_AREAS = CONFIG_CMA_AREAS

There is no real difference between the global area, and other
additionally configured CMA areas via CONFIG_CMA_AREAS that always
defaults without user input.  This makes MAX_CMA_AREAS same as
CONFIG_CMA_AREAS, also incrementing its default values, thus maintaining
current default for MAX_CMA_AREAS both for UMA and NUMA systems.

Link: https://lkml.kernel.org/r/20240205051929.298559-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/cma: drop CONFIG_CMA_DEBUG

All pr_debug() prints in (mm/cma.c) could be enabled via standard Makefile
based method.  Besides cma_debug_show_areas() should always be called
during cma_alloc() failure path.  This seemingly redundant config,
CONFIG_CMA_DEBUG can be dropped without any problem.

[lukas.bulwahn@gmail.com: remove debug code to removed CONFIG_CMA_DEBUG]
Link: https://lkml.kernel.org/r/20240207143825.986-1-lukas.bulwahn@gmail.com
Link: https://lkml.kernel.org/r/20240205031647.283510-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: rename test_kasan_module_init to kasan_test_module_init

After commit f7e01ab828fd ("kasan: move tests to mm/kasan/"), the test
module file is renamed from lib/test_kasan_module.c to
mm/kasan/kasan_test_module.c, in order to keep consistent, rename
test_kasan_module_init to kasan_test_module_init.

Link: https://lkml.kernel.org/r/20240205060925.15594-3-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: docs: update descriptions about test file and module

After commit f7e01ab828fd ("kasan: move tests to mm/kasan/"), the test
file is renamed to mm/kasan/kasan_test.c and the test module is renamed to
kasan_test.ko, so update the descriptions in the document.

While at it, update the line number and testcase number when the tests
kmalloc_large_oob_right and kmalloc_double_kzfree failed to sync with the
current code in mm/kasan/kasan_test.c.

Link: https://lkml.kernel.org/r/20240205060925.15594-2-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: run_vmtests.sh: add hugetlb_madv_vs_map

hugetlb_madv_vs_map selftest was not part of the mm test-suite since we
didn't have a fix for the problem it found.

Now that the problem is already fixed (see previous commit), let's enable
this selftest in the default test-suite.

Link: https://lkml.kernel.org/r/20240205191843.4009640-3-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: restore the reservation if needed

Patch series "mm/hugetlb: Restore the reservation", v2.

This is a fix for a case where a backing huge page could stolen after
madvise(MADV_DONTNEED).

A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/

In order to test this patch, I instrumented the kernel with LOCKDEP and
KASAN, and run the following tests, without any regression:
  * The self test that reproduces the problem
  * All mm hugetlb selftests
SUMMARY: PASS=9 SKIP=0 FAIL=0
  * All libhugetlbfs tests
PASS:     0     86
FAIL:     0      0

This patch (of 2):

Currently there is a bug that a huge page could be stolen, and when the
original owner tries to fault in it, it causes a page fault.

You can achieve that by:
  1) Creating a single page
echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  2) mmap() the page above with MAP_HUGETLB into (void *ptr1).
* This will mark the page as reserved
  3) touch the page, which causes a page fault and allocates the page
* This will move the page out of the free list.
* It will also unreserved the page, since there is no more free
  page
  4) madvise(MADV_DONTNEED) the page
* This will free the page, but not mark it as reserved.
  5) Allocate a secondary page with mmap(MAP_HUGETLB) into (void *ptr2).
* it should fail, but, since there is no more available page.
* But, since the page above is not reserved, this mmap() succeed.
  6) Faulting at ptr1 will cause a SIGBUS
* it will try to allocate a huge page, but there is none
  available

A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/

Fix this by restoring the reserved page if necessary.

These are the condition for the page restore:

 * The system is not using surplus pages. The goal is to reduce the
   surplus usage for this case.
 * If the VMA has the HPAGE_RESV_OWNER flag set, and is PRIVATE. This is
   safely checked using __vma_private_lock()
 * The page is anonymous

Once this is scenario is found, set the `hugetlb_restore_reserve` bit in
the folio. Then check if the resv reservations need to be adjusted
later, done later, after the spinlock, since the vma_xxxx_reservation()
might touch the file system lock.

Link: https://lkml.kernel.org/r/20240205191843.4009640-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20240205191843.4009640-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: add atomic tests

Test that KASan can detect some unsafe atomic accesses.

As discussed in the linked thread below, these tests attempt to cover
the most common uses of atomics and, therefore, aren't exhaustive.

Link: https://lkml.kernel.org/r/20240202113259.3045705-1-paul.heidekrueger@tum.de
Link: https://lore.kernel.org/all/20240131210041.686657-1-paul.heidekrueger@tum.de/T/#u
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@tum.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214055
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: reduce dependencies on <linux/kernel.h>

"page_counter.h" does not need <linux/kernel.h>. <linux/limits.h> is enough
to get LONG_MAX.

Files that include page_counter.h are limited. They have been compile
tested or checked.

$ git grep page_counter\.h
include/linux/hugetlb_cgroup.h: struct page_counter hugepage[HUGE_MAX_HSTATE];
--> all files that include it have been compile tested

include/linux/memcontrol.h:#include <linux/page_counter.h>
--> <linux/kernel.h> has been added, to be safe

include/net/sock.h:#include <linux/page_counter.h>
--> already include <linux/kernel.h>

mm/hugetlb_cgroup.c:#include <linux/page_counter.h>
mm/memcontrol.c:#include <linux/page_counter.h>
mm/page_counter.c:#include <linux/page_counter.h>
--> compile tested

Link: https://lkml.kernel.org/r/adfdbe21c4d06400d7bd802868762deb85cae8b6.1706908921.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: memcg: use larger batches for proactive reclaim

Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
reclaim") we passed the number of pages for the reclaim request directly
to try_to_free_mem_cgroup_pages, which could lead to significant
overreclaim.  After 0388536ac291 the number of pages was limited to a
maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
However such a small batch size caused a regression in reclaim performance
due to many more reclaim start/stop cycles inside memory_reclaim.  The
restart cost is amortized over more pages with larger batch sizes, and
becomes a significant component of the runtime if the batch size is too
small.

Reclaim tries to balance nr_to_reclaim fidelity with fairness across nodes
and cgroups over which the pages are spread.  As such, the bigger the
request, the bigger the absolute overreclaim error.  Historic in-kernel
users of reclaim have used fixed, small sized requests to approach an
appropriate reclaim rate over time.  When we reclaim a user request of
arbitrary size, use decaying batch sizes to manage error while maintaining
reasonable throughput.

MGLRU enabled - memcg LRU used
root - full reclaim       pages/sec   time (sec)
pre-0388536ac291      :    68047        10.46
post-0388536ac291     :    13742        inf
(reclaim-reclaimed)/4 :    67352        10.51

MGLRU enabled - memcg LRU not used
/uid_0 - 1G reclaim       pages/sec   time (sec)  overreclaim (MiB)
pre-0388536ac291      :    258822       1.12            107.8
post-0388536ac291     :    105174       2.49            3.5
(reclaim-reclaimed)/4 :    233396       1.12            -7.4

MGLRU enabled - memcg LRU not used
/uid_0 - full reclaim     pages/sec   time (sec)
pre-0388536ac291      :    72334        7.09
post-0388536ac291     :    38105        14.45
(reclaim-reclaimed)/4 :    72914        6.96

[tjmercier@google.com: v4]
Link: https://lkml.kernel.org/r/20240206175251.3364296-1-tjmercier@google.com
Link: https://lkml.kernel.org/r/20240202233855.1236422-1-tjmercier@google.com
Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Efly Young <yangyifei03@kuaishou.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap: pass vma to vma_merge()

These vma_merge() callers will pass mm, anon_vma and file, they all from
the same vma.  There is no need to pass three parameters at the same time.

Pass vma instead of mm, anon_vma and file to vma_merge(), so that it can
save two parameters.

Link: https://lkml.kernel.org/r/20240203014632.2726545-1-yajun.deng@linux.dev
Link: https://lore.kernel.org/lkml/20240125034922.1004671-2-yajun.deng@linux.dev/
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: run_vmtests.sh: add hugetlb test category

The usage of run_vmtests.sh does not include hugetlb, which is a valid
test category.

Add the 'hugetlb' to the usage of run_vmtests.sh.

Link: https://lkml.kernel.org/r/20240129115246.1234253-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Joel Savitz <jsavitz@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: ignore writable bit in folio_pte_batch()

...  and conditionally return to the caller if any PTE except the first
one is writable.  fork() has to make sure to properly write-protect in
case any PTE is writable.  Other users (e.g., page unmaping) are expected
to not care.

Link: https://lkml.kernel.org/r/20240129124649.189745-16-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: ignore dirty/accessed/soft-dirty bits in folio_pte_batch()

Let's always ignore the accessed/young bit: we'll always mark the PTE as
old in our child process during fork, and upcoming users will similarly
not care.

Ignore the dirty bit only if we don't want to duplicate the dirty bit into
the child process during fork.  Maybe, we could just set all PTEs in the
child dirty if any PTE is dirty.  For now, let's keep the behavior
unchanged, this can be optimized later if required.

Ignore the soft-dirty bit only if the bit doesn't have any meaning in the
src vma, and similarly won't have any in the copied dst vma.

For now, we won't bother with the uffd-wp bit.

Link: https://lkml.kernel.org/r/20240129124649.189745-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: optimize fork() with PTE-mapped THP

Let's implement PTE batching when consecutive (present) PTEs map
consecutive pages of the same large folio, and all other PTE bits besides
the PFNs are equal.

We will optimize folio_pte_batch() separately, to ignore selected PTE
bits.  This patch is based on work by Ryan Roberts.

Use __always_inline for __copy_present_ptes() and keep the handling for
single PTEs completely separate from the multi-PTE case: we really want
the compiler to optimize for the single-PTE case with small folios, to not
degrade performance.

Note that PTE batching will never exceed a single page table and will
always stay within VMA boundaries.

Further, processing PTE-mapped THP that maybe pinned and have
PageAnonExclusive set on at least one subpage should work as expected, but
there is room for improvement: We will repeatedly (1) detect a PTE batch
(2) detect that we have to copy a page (3) fall back and allocate a single
page to copy a single page.  For now we won't care as pinned pages are a
corner case, and we should rather look into maintaining only a single
PageAnonExclusive bit for large folios.

Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: pass PTE to copy_present_pte()

We already read it, let's just forward it.

This patch is based on work by Ryan Roberts.

[david@redhat.com: fix the hmm "exclusive_cow" selftest]
Link: https://lkml.kernel.org/r/13f296b8-e882-47fd-b939-c2141dc28717@redhat.com
Link: https://lkml.kernel.org/r/20240129124649.189745-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: factor out copying the actual PTE in copy_present_pte()

Let's prepare for further changes.

Link: https://lkml.kernel.org/r/20240129124649.189745-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/mm: use pte_next_pfn() in set_ptes()

Let's use our handy new helper. Note that the implementation is slightly
different, but shouldn't really make a difference in practice.

Link: https://lkml.kernel.org/r/20240129124649.189745-11-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm/mm: use pte_next_pfn() in set_ptes()

Let's use our handy helper now that it's available on all archs.

Link: https://lkml.kernel.org/r/20240129124649.189745-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/pgtable: make pte_next_pfn() independent of set_ptes()

Let's provide pte_next_pfn(), independently of set_ptes().  This allows
for using the generic pte_next_pfn() version in some arch-specific
set_ptes() implementations, and prepares for reusing pte_next_pfn() in
other context.

Link: https://lkml.kernel.org/r/20240129124649.189745-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sparc/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

s390/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

riscv/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nios2/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm/pgtable: define PFN_PTE_SHIFT

We want to make use of pte_next_pfn() outside of set_ptes().  Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().

Link: https://lkml.kernel.org/r/20240129124649.189745-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm64/mm: make set_ptes() robust when OAs cross 48-bit boundary

Patch series "mm/memory: optimize fork() with PTE-mapped THP", v3.

Now that the rmap overhaul[1] is upstream that provides a clean interface
for rmap batching, let's implement PTE batching during fork when
processing PTE-mapped THPs.

This series is partially based on Ryan's previous work[2] to implement
cont-pte support on arm64, but its a complete rewrite based on [1] to
optimize all architectures independent of any such PTE bits, and to use
the new rmap batching functions that simplify the code and prepare for
further rmap accounting changes.

We collect consecutive PTEs that map consecutive pages of the same large
folio, making sure that the other PTE bits are compatible, and (a) adjust
the refcount only once per batch, (b) call rmap handling functions only
once per batch and (c) perform batch PTE setting/updates.

While this series should be beneficial for adding cont-pte support on
ARM64[2], it's one of the requirements for maintaining a total mapcount[3]
for large folios with minimal added overhead and further changes[4] that
build up on top of the total mapcount.

Independent of all that, this series results in a speedup during fork with
PTE-mapped THP, which is the default with THPs that are smaller than a PMD
(for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]).

On an Intel Xeon Silver 4210R CPU, fork'ing with 1GiB of PTE-mapped folios
of the same size (stddev < 1%) results in the following runtimes for
fork() (shorter is better):

Folio Size | v6.8-rc1 |      New | Change
------------------------------------------
      4KiB | 0.014328 | 0.014035 |   - 2%
     16KiB | 0.014263 | 0.01196  |   -16%
     32KiB | 0.014334 | 0.01094  |   -24%
     64KiB | 0.014046 | 0.010444 |   -26%
    128KiB | 0.014011 | 0.010063 |   -28%
    256KiB | 0.013993 | 0.009938 |   -29%
    512KiB | 0.013983 | 0.00985  |   -30%
   1024KiB | 0.013986 | 0.00982  |   -30%
   2048KiB | 0.014305 | 0.010076 |   -30%

Note that these numbers are even better than the ones from v1 (verified
over multiple reboots), even though there were only minimal code changes.
Well, I removed a pte_mkclean() call for anon folios, maybe that also
plays a role.

But my experience is that fork() is extremely sensitive to code size,
inlining, ...  so I suspect we'll see on other architectures rather a
change of -20% instead of -30%, and it will be easy to "lose" some of that
speedup in the future by subtle code changes.

Next up is PTE batching when unmapping.  Only tested on x86-64.
Compile-tested on most other architectures.

[1] https://lkml.kernel.org/r/20231220224504.646757-1-david@redhat.com
[2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com
[3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com
[4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com
[5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com

This patch (of 15):

Since the high bits [51:48] of an OA are not stored contiguously in the
PTE, there is a theoretical bug in set_ptes(), which just adds PAGE_SIZE
to the pte to get the pte with the next pfn.  This works until the pfn
crosses the 48-bit boundary, at which point we overflow into the upper
attributes.

Of course one could argue (and Matthew Wilcox has :) that we will never
see a folio cross this boundary because we only allow naturally aligned
power-of-2 allocation, so this would require a half-petabyte folio.  So
its only a theoretical bug.  But its better that the code is robust
regardless.

I've implemented pte_next_pfn() as part of the fix, which is an opt-in
core-mm interface.  So that is now available to the core-mm, which will be
needed shortly to support forthcoming fork()-batching optimizations.

Link: https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240125173534.1659317-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240129124649.189745-2-david@redhat.com
Fixes: 4a169d61c2ed ("arm64: implement the new page table range API")
Closes: https://lore.kernel.org/linux-mm/fdaeb9a5-d890-499a-92c8-d171df43ad01@arm.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmscan: change the type of file from int to bool

Change the type of file from int to bool because is_file_lru return bool

Link: https://lkml.kernel.org/r/20240131103802.122920-1-gehao@kylinos.cn
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: compaction: update the cc->nr_migratepages when allocating or freeing the freepages

Currently we will use 'cc->nr_freepages >= cc->nr_migratepages' comparison
to ensure that enough freepages are isolated in isolate_freepages(),
however it just decreases the cc->nr_freepages without updating
cc->nr_migratepages in compaction_alloc(), which will waste more CPU
cycles and cause too many freepages to be isolated.

So we should also update the cc->nr_migratepages when allocating or
freeing the freepages to avoid isolating excess freepages.  And I can see
fewer free pages are scanned and isolated when running thpcompact on my
Arm64 server:

                                       k6.7         k6.7_patched
Ops Compaction pages isolated      120692036.00   118160797.00
Ops Compaction migrate scanned     131210329.00   154093268.00
Ops Compaction free scanned       1090587971.00  1080632536.00
Ops Compact scan efficiency               12.03          14.26

Moreover, I did not see an obvious latency improvements, this is likely
because isolating freepages is not the bottleneck in the thpcompact test
case.

                              k6.7                  k6.7_patched
Amean     fault-both-1      1089.76 (   0.00%)     1080.16 *   0.88%*
Amean     fault-both-3      1616.48 (   0.00%)     1636.65 *  -1.25%*
Amean     fault-both-5      2266.66 (   0.00%)     2219.20 *   2.09%*
Amean     fault-both-7      2909.84 (   0.00%)     2801.90 *   3.71%*
Amean     fault-both-12     4861.26 (   0.00%)     4733.25 *   2.63%*
Amean     fault-both-18     7351.11 (   0.00%)     6950.51 *   5.45%*
Amean     fault-both-24     9059.30 (   0.00%)     9159.99 *  -1.11%*
Amean     fault-both-30    10685.68 (   0.00%)    11399.02 *  -6.68%*

Link: https://lkml.kernel.org/r/6440493f18da82298152b6305d6b41c2962a3ce6.1708409245.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: virtual_address_range: conform to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-13-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: transhuge-stress: conform to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-12-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: thuge-gen: conform to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Also remove unneeded logging which isn't enabled.  Skip a hugepage size if
it has less free pages to avoid unnecessary failures.  For examples, some
systems may not have 1GB hugepage free.  So skip 1GB for testing in this
test instead of failing the entire test.

Link: https://lkml.kernel.org/r/20240202113119.2047740-11-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: split_huge_page_test: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-9-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mremap_dontunmap: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-8-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mrelease_test: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-7-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mlock2-tests: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.
I've done some cleanups as well.

Link: https://lkml.kernel.org/r/20240202113119.2047740-6-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mlock-random-test: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-5-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: map_populate: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.
Minor cleanups have also been included.

Link: https://lkml.kernel.org/r/20240202113119.2047740-4-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: map_hugetlb: conform test to TAP format output

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.

Link: https://lkml.kernel.org/r/20240202113119.2047740-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: map_fixed_noreplace: conform test to TAP format output

Patch series "conform tests to TAP format output", v2.

This patch (of 12):

Conform the layout, informational and status messages to TAP.  No
functional change is intended other than the layout of output messages.
While at it, convert commenting style from // to /**/.

Link: https://lkml.kernel.org/r/20240202113119.2047740-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240202113119.2047740-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

userfaultfd: handle zeropage moves by UFFDIO_MOVE

Current implementation of UFFDIO_MOVE fails to move zeropages and returns
EBUSY when it encounters one.  We can handle them by mapping a zeropage at
the destination and clearing the mapping at the source.  This is done both
for ordinary and for huge zeropages.

Link: https://lkml.kernel.org/r/20240131175618.2417291-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202401300107.U8iMAkTl-lkp@intel.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

XArray: add cmpxchg order test

XArray multi-index entries do not keep track of the order stored once the
entry is being marked as used with cmpxchg (conditionally replaced with
NULL).  Add a test to check the order is actually lost.  The test also
verifies the order and entries for all the tied indexes before and after
the NULL replacement with xa_cmpxchg.

Add another entry at 1 << order that keeps the node around and the order
information for the NULL-entry after xa_cmpxchg.

Link: https://lkml.kernel.org/r/20240131225125.1370598-3-mcgrof@kernel.org
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

test_xarray: add tests for advanced multi-index use

Patch series "test_xarray: advanced API multi-index tests", v2.

This is a respin of the test_xarray multi-index tests [0] which use and
demonstrate the advanced API which is used by the page cache.  This should
let folks more easily follow how we use multi-index to support for example
a min order later in the page cache.  It also lets us grow the selftests
to mimic more of what we do in the page cache.

This patch (of 2):

The multi index selftests are great but they don't replicate how we deal
with the page cache exactly, which makes it a bit hard to follow as the
page cache uses the advanced API.

Add tests which use the advanced API, mimicking what we do in the page
cache, while at it, extend the example to do what is needed for min order
support.

[mcgrof@kernel.org: fix soft lockup for advanced-api tests]
Link: https://lkml.kernel.org/r/20240216194329.840555-1-mcgrof@kernel.org
[akpm@linux-foundation.org: s/i/loops/, make non-static]
[akpm@linux-foundation.org: restore static storage for loop counter]
Link: https://lkml.kernel.org/r/20240131225125.1370598-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240131225125.1370598-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/cma: don't treat bad input arguments for cma_alloc() as its failure

Invalid cma_alloc() input scenarios - including excess allocation request
should neither be counted as CMA_ALLOC_FAIL nor 'cma->nr_pages_failed' be
updated when applicable with CONFIG_CMA_SYSFS. This also drops 'out' jump
label which has become redundant.

Link: https://lkml.kernel.org/r/20240201023714.3871061-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: ptdump: add check_wx_pages debugfs attribute

Add a readable attribute in debugfs to trigger a W^X pages check at any
time.

To trigger the test, just read /sys/kernel/debug/check_wx_pages It will
report FAILED if the test failed, SUCCESS otherwise.

Detailed result is provided into dmesg.

Link: https://lkml.kernel.org/r/e947fb1a9f3f5466344823e532d343ff194ae03d.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: ptdump: have ptdump_check_wx() return bool

Have ptdump_check_wx() return true when the check is successful or false
otherwise.

[akpm@linux-foundation.org: fix a couple of build issues (x86_64 allmodconfig)]
Link: https://lkml.kernel.org/r/7943149fe955458cb7b57cd483bf41a3aad94684.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc,s390: ptdump: define ptdump_check_wx() regardless of CONFIG_DEBUG_WX

Following patch will use ptdump_check_wx() regardless of CONFIG_DEBUG_WX,
so define it at all times on powerpc and s390 just like other
architectures.  Though keep the WARN_ON_ONCE() only when CONFIG_DEBUG_WX
is set.

Link: https://lkml.kernel.org/r/07bfb04c7fec58e84413e91d2533581be357a696.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm64, powerpc, riscv, s390, x86: ptdump: refactor CONFIG_DEBUG_WX

All architectures using the core ptdump functionality also implement
CONFIG_DEBUG_WX, and they all do it more or less the same way, with a
function called debug_checkwx() that is called by mark_rodata_ro(), which
is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a
no-op otherwise.

Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call
debug_checkwx() immediately after calling mark_rodata_ro() instead of
calling it at the end of every mark_rodata_ro().

On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX
before calling debug_checkwx().  Now the check is inside the callee
ptdump_walk_pgd_level_checkwx().

On powerpc_64, mark_rodata_ro() bails out early before calling
ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature.  The check
is now also done in ptdump_check_wx() as it is called outside
mark_rodata_ro().

Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm: ptdump: rename CONFIG_DEBUG_WX to CONFIG_ARM_DEBUG_WX

Patch series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages
debugfs attribute", v2.

This series refactors CONFIG_DEBUG_WX for the 5 architectures implementing
CONFIG_GENERIC_PTDUMP

First rename stuff in ARM which uses similar names while not implementing
CONFIG_GENERIC_PTDUMP.

Then define a generic version of debug_checkwx() that calls
ptdump_check_wx() when CONFIG_DEBUG_WX is set.  Call it immediately after
calling mark_rodata_ro() instead of calling it at the end of every
mark_rodata_ro().

Then implement a debugfs attribute that can be used to trigger a W^X test
at anytime and regardless of CONFIG_DEBUG_WX

This patch (of 5):

CONFIG_DEBUG_WX is a core option defined in mm/Kconfig.debug

To avoid any future conflict, rename ARM version into CONFIG_ARM_DEBUG_WX.

Link: https://lore.kernel.org/lkml/20200422152656.GF676@willie-the-truck/T/#m802eaf33efd6f8d575939d157301b35ac0d4a64f
Link: https://github.com/KSPP/linux/issues/35
Link: https://lkml.kernel.org/r/cover.1706610398.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/fa297aa90caeb61eee2b70c6c5897a2ab58a9562.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mempolicy: protect task interleave functions with tsk->mems_allowed_seq

In the event of rebind, pol->nodemask can change at the same time as an
allocation occurs.  We can detect this with tsk->mems_allowed_seq and
prevent a miscount or an allocation failure from occurring.

The same thing happens in the allocators to detect failure, but this can
prevent spurious failures in a much smaller critical section.

[gourry.memverge@gmail.com: weighted interleave checks wrong parameter]
Link: https://lkml.kernel.org/r/20240206192853.3589-1-gregory.price@memverge.com
Link: https://lkml.kernel.org/r/20240202170238.90004-5-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mempolicy: introduce MPOL_WEIGHTED_INTERLEAVE for weighted interleaving

When a system has multiple NUMA nodes and it becomes bandwidth hungry,
using the current MPOL_INTERLEAVE could be an wise option.

However, if those NUMA nodes consist of different types of memory such as
socket-attached DRAM and CXL/PCIe attached DRAM, the round-robin based
interleave policy does not optimally distribute data to make use of their
different bandwidth characteristics.

Instead, interleave is more effective when the allocation policy follows
each NUMA nodes' bandwidth weight rather than a simple 1:1 distribution.

This patch introduces a new memory policy, MPOL_WEIGHTED_INTERLEAVE,
enabling weighted interleave between NUMA nodes.  Weighted interleave
allows for proportional distribution of memory across multiple numa nodes,
preferably apportioned to match the bandwidth of each node.

For example, if a system has 1 CPU node (0), and 2 memory nodes (0,1),
with bandwidth of (100GB/s, 50GB/s) respectively, the appropriate weight
distribution is (2:1).

Weights for each node can be assigned via the new sysfs extension:
/sys/kernel/mm/mempolicy/weighted_interleave/

For now, the default value of all nodes will be `1`, which matches the
behavior of standard 1:1 round-robin interleave.  An extension will be
added in the future to allow default values to be registered at kernel and
device bringup time.

The policy allocates a number of pages equal to the set weights.  For
example, if the weights are (2,1), then 2 pages will be allocated on node0
for every 1 page allocated on node1.

The new flag MPOL_WEIGHTED_INTERLEAVE can be used in set_mempolicy(2)
and mbind(2).

Some high level notes about the pieces of weighted interleave:

current->il_prev:
    Tracks the node previously allocated from.

current->il_weight:
    The active weight of the current node (current->il_prev)
    When this reaches 0, current->il_prev is set to the next node
    and current->il_weight is set to the next weight.

weighted_interleave_nodes:
    Counts the number of allocations as they occur, and applies the
    weight for the current node.  When the weight reaches 0, switch
    to the next node.  Operates only on task->mempolicy.

weighted_interleave_nid:
    Gets the total weight of the nodemask as well as each individual
    node weight, then calculates the node based on the given index.
    Operates on VMA policies.

bulk_array_weighted_interleave:
    Gets the total weight of the nodemask as well as each individual
    node weight, then calculates the number of "interleave rounds" as
    well as any delta ("partial round").  Calculates the number of
    pages for each node and allocates them.

    If a node was scheduled for interleave via interleave_nodes, the
    current weight will be allocated first.

    Operates only on the task->mempolicy.

One piece of complexity is the interaction between a recent refactor which
split the logic to acquire the "ilx" (interleave index) of an allocation
and the actually application of the interleave.  If a call to
alloc_pages_mpol() were made with a weighted-interleave policy and ilx set
to NO_INTERLEAVE_INDEX, weighted_interleave_nodes() would operate on a VMA
policy - violating the description above.

An inspection of all callers of alloc_pages_mpol() shows that all external
callers set ilx to `0`, an index value, or will call get_vma_policy() to
acquire the ilx.

For example, mm/shmem.c may call into alloc_pages_mpol.  The call stacks
all set (pgoff_t ilx) or end up in `get_vma_policy()`.  This enforces the
`weighted_interleave_nodes()` and `weighted_interleave_nid()` policy
requirements (task/vma respectively).

Link: https://lkml.kernel.org/r/20240202170238.90004-4-gregory.price@memverge.com
Suggested-by: Hasan Al Maruf <Hasan.Maruf@amd.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Co-developed-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Co-developed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Co-developed-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mempolicy: refactor a read-once mechanism into a function for re-use

Move the use of barrier() to force policy->nodemask onto the stack into a
function `read_once_policy_nodemask` so that it may be re-used.

Link: https://lkml.kernel.org/r/20240202170238.90004-3-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mempolicy: implement the sysfs-based weighted_interleave interface

Patch series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension", v5.

Weighted interleave is a new interleave policy intended to make use of
heterogeneous memory environments appearing with CXL.

The existing interleave mechanism does an even round-robin distribution of
memory across all nodes in a nodemask, while weighted interleave
distributes memory across nodes according to a provided weight.  (Weight =
# of page allocations per round)

Weighted interleave is intended to reduce average latency when bandwidth
is pressured - therefore increasing total throughput.

In other words: It allows greater use of the total available bandwidth in
a heterogeneous hardware environment (different hardware provides
different bandwidth capacity).

As bandwidth is pressured, latency increases - first linearly and then
exponentially.  By keeping bandwidth usage distributed according to
available bandwidth, we therefore can reduce the average latency of a
cacheline fetch.

A good explanation of the bandwidth vs latency response curve:
https://mahmoudhatem.wordpress.com/2017/11/07/memory-bandwidth-vs-latency-response-curve/

From the article:
```
Constant region:
    The latency response is fairly constant for the first 40%
    of the sustained bandwidth.
Linear region:
    In between 40% to 80% of the sustained bandwidth, the
    latency response increases almost linearly with the bandwidth
    demand of the system due to contention overhead by numerous
    memory requests.
Exponential region:
    Between 80% to 100% of the sustained bandwidth, the memory
    latency is dominated by the contention latency which can be
    as much as twice the idle latency or more.
Maximum sustained bandwidth :
    Is 65% to 75% of the theoretical maximum bandwidth.
```

As a general rule of thumb:
* If bandwidth usage is low, latency does not increase. It is
  optimal to place data in the nearest (lowest latency) device.
* If bandwidth usage is high, latency increases. It is optimal
  to place data such that bandwidth use is optimized per-device.

This is the top line goal: Provide a user a mechanism to target using the
"maximum sustained bandwidth" of each hardware component in a heterogenous
memory system.

For example, the stream benchmark demonstrates that 1:1 (default)
interleave is actively harmful, while weighted interleave can be
beneficial.  Default interleave distributes data such that too much
pressure is placed on devices with lower available bandwidth.

Stream Benchmark (vs DRAM, 1 Socket + 1 CXL Device)
Default interleave : -78% (slower than DRAM)
Global weighting   : -6% to +4% (workload dependant)
Targeted weights   : +2.5% to +4% (consistently better than DRAM)

Global means the task-policy was set (set_mempolicy), while targeted means
VMA policies were set (mbind2).  We see weighted interleave is not always
beneficial when applied globally, but is always beneficial when applied to
bandwidth-driving memory regions.

There are 4 patches in this set:
1) Implement system-global interleave weights as sysfs extension
   in mm/mempolicy.c.  These weights are RCU protected, and a
   default weight set is provided (all weights are 1 by default).

   In future work, we intend to expose an interface for HMAT/CDAT
   code to set reasonable default values based on the memory
   configuration of the system discovered at boot/hotplug.

2) A mild refactor of some interleave-logic for re-use in the
   new weighted interleave logic.

3) MPOL_WEIGHTED_INTERLEAVE extension for set_mempolicy/mbind

4) Protect interleave logic (weighted and normal) with the
   mems_allowed seq cookie.  If the nodemask changes while
   accessing it during a rebind, just retry the access.

Included below are some performance and LTP test information,
and a sample numactl branch which can be used for testing.

= Performance summary =
(tests may have different configurations, see extended info below)
1) MLC (W2) : +38% over DRAM. +264% over default interleave.
   MLC (W5) : +40% over DRAM. +226% over default interleave.
2) Stream   : -6% to +4% over DRAM, +430% over default interleave.
3) XSBench  : +19% over DRAM. +47% over default interleave.

= LTP Testing Summary =
existing mempolicy & mbind tests: pass
mempolicy & mbind + weighted interleave (global weights): pass

= version history
v5:
- style fixes
- mems_allowed cookie protection to detect rebind issues,
  prevents spurious allocation failures and/or mis-allocations
- sparse warning fixes related to __rcu on local variables

=====================================================================
Performance tests - MLC
From - Ravi Jonnalagadda <ravis.opensrc@micron.com>

Hardware: Single-socket, multiple CXL memory expanders.

Workload:                               W2
Data Signature:                         2:1 read:write
DRAM only bandwidth (GBps):             298.8
DRAM + CXL (default interleave) (GBps): 113.04
DRAM + CXL (weighted interleave)(GBps): 412.5
Gain over DRAM only:                    1.38x
Gain over default interleave:           2.64x

Workload:                               W5
Data Signature:                         1:1 read:write
DRAM only bandwidth (GBps):             273.2
DRAM + CXL (default interleave) (GBps): 117.23
DRAM + CXL (weighted interleave)(GBps): 382.7
Gain over DRAM only:                    1.4x
Gain over default interleave:           2.26x

=====================================================================
Performance test - Stream
From - Gregory Price <gregory.price@memverge.com>

Hardware: Single socket, single CXL expander
numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master

Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times
Default interleave : -78% (slower than DRAM)
Global weighting   : -6% to +4% (workload dependant)
mbind2 weights     : +2.5% to +4% (consistently better than DRAM)

dram only:
numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Function     Direction    BestRateMBs     AvgTime      MinTime      MaxTime
Copy:        0->0            200923.2     0.032662     0.031853     0.033301
Scale:       0->0            202123.0     0.032526     0.031664     0.032970
Add:         0->0            208873.2     0.047322     0.045961     0.047884
Triad:       0->0            208523.8     0.047262     0.046038     0.048414

CXL-only:
numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0             22209.7     0.288661     0.288162     0.289342
Scale:       0->0             22288.2     0.287549     0.287147     0.288291
Add:         0->0             24419.1     0.393372     0.393135     0.393735
Triad:       0->0             24484.6     0.392337     0.392083     0.394331

Based on the above, the optimal weights are ~9:1
echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1
echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2

default interleave:
numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0             44666.2     0.143671     0.143285     0.144174
Scale:       0->0             44781.6     0.143256     0.142916     0.143713
Add:         0->0             48600.7     0.197719     0.197528     0.197858
Triad:       0->0             48727.5     0.197204     0.197014     0.197439

global weighted interleave:
numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0            190085.9     0.034289     0.033669     0.034645
Scale:       0->0            207677.4     0.031909     0.030817     0.033061
Add:         0->0            202036.8     0.048737     0.047516     0.053409
Triad:       0->0            217671.5     0.045819     0.044103     0.046755

targted regions w/ global weights (modified stream to mbind2 malloc'd regions))
numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc
Copy:        0->0            205827.0     0.031445     0.031094     0.031984
Scale:       0->0            208171.8     0.031320     0.030744     0.032505
Add:         0->0            217352.0     0.045087     0.044168     0.046515
Triad:       0->0            216884.8     0.045062     0.044263     0.046982

=====================================================================
Performance tests - XSBench
From - Hyeongtak Ji <hyeongtak.ji@sk.com>

Hardware: Single socket, Single CXL memory Expander

NUMA node 0: 56 logical cores, 128 GB memory
NUMA node 2: 96 GB CXL memory
Threads:     56
Lookups:     170,000,000

Summary: +19% over DRAM. +47% over default interleave.

Performance tests - XSBench
1. dram only
$ numactl -m 0 ./XSBench -s XL –p 5000000
Runtime:     36.235 seconds
Lookups/s:   4,691,618

2. default interleave
$ numactl –i 0,2 ./XSBench –s XL –p 5000000
Runtime:     55.243 seconds
Lookups/s:   3,077,293

3. weighted interleave
numactl –w –i 0,2 ./XSBench –s XL –p 5000000
Runtime:     29.262 seconds
Lookups/s:   5,809,513

=====================================================================
LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2

= Existing tests
set_mempolicy, get_mempolicy, mbind

MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but
did not adjust tests for weighting.  Basically the weights were set to 1,
which is the default, and it should behave the same as MPOL_INTERLEAVE if
logic is correct.

== set_mempolicy01 : passed   18, failed   0
== set_mempolicy02 : passed   10, failed   0
== set_mempolicy03 : passed   64, failed   0
== set_mempolicy04 : passed   32, failed   0
== set_mempolicy05 - n/a on non-x86
== set_mempolicy06 : passed   10, failed   0
   this is set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE
== set_mempolicy07 : passed   32, failed   0
   set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy01 : passed   12, failed   0
   change: added MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy02 : passed   2, failed   0
== mbind01 : passed   15, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind02 : passed   4, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind03 : passed   16, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind04 : passed   48, failed   0
   added MPOL_WEIGHTED_INTERLEAVE

=====================================================================
numactl (set_mempolicy) w/ global weighting test
numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master

command: numactl -w --interleave=0,1 ./eatmem

result (weights 1:1):
0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4
7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4
50% distribution is correct

result (weights 5:1):
01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4
7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4
16.666% distribution is correct

result (weights 1:5):
01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4
7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4
16.666% distribution is correct

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main (void)
{
        char* mem = malloc(1024*1024*256);
        memset(mem, 1, 1024*1024*256);
        for (int i = 0; i  < ((1024*1024*256)/4096); i++)
        {
                mem = malloc(4096);
                mem[0] = 1;
        }
        printf("done\n");
        getchar();
        return 0;
}

This patch (of 4):

This patch provides a way to set interleave weight information under sysfs
at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN

The sysfs structure is designed as follows.

  $ tree /sys/kernel/mm/mempolicy/
  /sys/kernel/mm/mempolicy/ [1]
  └── weighted_interleave [2]
      ├── node0 [3]
      └── node1

Each file above can be explained as follows.

[1] mm/mempolicy: configuration interface for mempolicy subsystem

[2] weighted_interleave/: config interface for weighted interleave policy

[3] weighted_interleave/nodeN: weight for nodeN

If a node value is set to `0`, the system-default value will be used.
As of this patch, the system-default for all nodes is always 1.

Link: https://lkml.kernel.org/r/20240202170238.90004-1-gregory.price@memverge.com
Link: https://lkml.kernel.org/r/20240202170238.90004-2-gregory.price@memverge.com
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Gregory Price <gourry.memverge@gmail.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap: use SZ_{8K, 128K} helper macro

Use SZ_{8K, 128K} helper macro instead of the number in init_user_reserve
and reserve_mem_notifier. This is more readable.

Link: https://lkml.kernel.org/r/20240131031913.2058597-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/translations/damon/usage: update for monitor_on renaming

Update DAMON debugfs interface sections on the translated usage documents
to reflect the fact that 'monitor_on' file has renamed to
'monitor_on_DEPRECATED'.

Link: https://lkml.kernel.org/r/20240130013549.89538-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/admin-guide/mm/damon/usage: update for monitor_on renaming

Update DAMON debugfs interface sections on the usage document to reflect
the fact that 'monitor_on' file has renamed to 'monitor_on_DEPRECATED'.

Link: https://lkml.kernel.org/r/20240130013549.89538-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/dbgfs: rename monitor_on file to monitor_on_DEPRECATED

Kernel builders could silently enable CONFIG_DAMON_DBGFS_DEPRECATED.
Users who manually check the files under the DAMON debugfs directory could
notice the deprecation owing to the 'DEPRECATED' DAMON debugfs file, but
there could be users who doesn't manually check the files.

Make the deprecation cannot be ignored in the case by renaming
'monitor_on' file, which is essential for real use of DAMON on runtime, to
'monitor_on_DEPRECATED'.  Still users who control DAMON via only
user-space tool could ignore the deprecation, but that's what the tool
developers should take care of.  DAMON user-space tool, damo, has also
made a change[1] for the purpose.

[1] commit 935dae76f2aee ("_damon_args: Rename --damon_interface to
    --damon_interface_DEPRECATED") of https://github.com/awslabs/damo

Link: https://lkml.kernel.org/r/20240130013549.89538-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftets/damon: prepare for monitor_on file renaming

Following change will rename 'monitor_on' DAMON debugfs file to
'monitor_on_DEPRECATED', to make the deprecation unignorable in runtime.
Since it could make DAMON selftests fail and disturb future bisects,
update DAMON selftests to support the change.

Link: https://lkml.kernel.org/r/20240130013549.89538-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/admin-guide/mm/damon/usage: document 'DEPRECATED' file of DAMON debugfs interface

Document the newly added DAMON debugfs interface deprecation notice file
on the usage document.

Link: https://lkml.kernel.org/r/20240130013549.89538-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/dbgfs: make debugfs interface deprecation message a macro

DAMON debugfs interface deprecation message is written twice, once for the
warning, and again for DEPRECATED file's read output.  De-duplicate those
by defining the message as a macro and reuse.

[akpm@linux-foundation.org: s/comnst/const/]
Link: https://lkml.kernel.org/r/20240130013549.89538-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/dbgfs: implement deprecation notice file

Implement a read-only file for DAMON debugfs interface deprecation notice,
to let users who manually read/write the DAMON debugfs files from their
shell command line easily notice the fact.

[arnd@arndb.de: fix bogus string length]
Link: https://lkml.kernel.org/r/20240202124339.892862-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240130013549.89538-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon: rename CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED

DAMON debugfs interface is deprecated.  The fact has documented by commit
5445fcbc4cda ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs
interface deprecation notice").  Commit 620932cd2852 ("mm/damon/dbgfs:
print DAMON debugfs interface deprecation message") further started
printing a warning message when users still use it.  Many people don't
read documentation or kernel log, though.

Make the deprecation harder to be ignored using the approach of commit
eb07c4f39c3e ("mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED").
'make oldconfig' with 'CONFIG_DAMON_DBGFS=y' will get a new prompt with
the explicit deprecation notice on the name.  'make olddefconfig' with
'CONFIG_DAMON_DBGFS=y' will result in not building DAMON debugfs
interface.  If there is a real user of DAMON debugfs interface, they will
complain the change to the builder.

Link: https://lkml.kernel.org/r/20240130013549.89538-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Docs/admin-guide/mm/damon/usage: use sysfs interface for tracepoints example

Patch series "mm/damon: make DAMON debugfs interface deprecation
unignorable".

DAMON debugfs interface is deprecated in February 2023, by commit
5445fcbc4cda ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs
interface deprecation notice").  Make the fact unable to be easily ignored
by removing an example usage from the document (patch 1), renaming the
config (patch 2), adding a deprecation notice file to the debugfs
directory (patches 3-5), and renaming the debugfs file that essnetial to
be used for real use of DAMON (patches 6-9).

This patch (of 9):

DAMON tracepoints example on the DAMON usage document is using DAMON
debugfs interface, which is deprecated.  Use its alternative, DAMON sysfs
interface.

Link: https://lkml.kernel.org/r/20240130013549.89538-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240130013549.89538-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: shrink_memcg_cb

shrink_memcg_cb() is called by the shrinker and is based on
zswap_writeback_entry(). Move it in between. Save one fwd decl.

Link: https://lkml.kernel.org/r/20240130014208.565554-21-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: writeback

Shrinking needs writeback. Naturally, move the writeback code above
the shrinking code. Delete the forward decl.

Link: https://lkml.kernel.org/r/20240130014208.565554-20-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: per-cpu compression infra

The per-cpu compression init/exit callbacks are awkwardly in the
middle of the shrinker code. Move them up to the compression section.

Link: https://lkml.kernel.org/r/20240130014208.565554-19-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: compress & decompress functions

Writeback needs to decompress. Move the (de)compression API above what
will be the consolidated shrinking/writeback code.

Link: https://lkml.kernel.org/r/20240130014208.565554-18-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: move entry section out of tree section

The higher-level entry operations modify the tree, so move the entry
API after the tree section.

Link: https://lkml.kernel.org/r/20240130014208.565554-17-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: move entry sections out of LRU section

This completes consolidation of the LRU section.

Link: https://lkml.kernel.org/r/20240130014208.565554-16-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: public lru api

The zswap entry section sits awkwardly in the middle of LRU-related
functions. Group the external LRU API functions first.

Link: https://lkml.kernel.org/r/20240130014208.565554-15-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: pool params

Patch series "mm: zswap: cleanups".

Cleanups and maintenance items that accumulated while reviewing zswap
patches.

This patch (of 20):

The parameters primarily control pool attributes. Move those
operations up to the pool section.

Link: https://lkml.kernel.org/r/20240130014208.565554-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20240130014208.565554-14-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: zswap_pools

Move the operations against the global zswap_pools list (current pool,
last, find) to the pool section.

Link: https://lkml.kernel.org/r/20240130014208.565554-13-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: pool refcounting

Move pool refcounting functions into the pool section. First the
destroy functions, then the get and put which uses them.

__zswap_pool_empty() has an upward reference to the global
zswap_pools, to sanity check it's not the currently active pool that's
being freed. That gets the forward decl for zswap_pool_current().

This puts the get and put function above all callers, so kill the
forward decls as well.

Link: https://lkml.kernel.org/r/20240130014208.565554-12-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: function ordering: pool alloc & free

The function ordering in zswap.c is a little chaotic, which requires
jumping in unexpected directions when following related code. This is
a series of patches that brings the file into the following order:

- pool functions
- lru functions
- rbtree functions
- zswap entry functions
- compression/backend functions
- writeback & shrinking functions
- store, load, invalidate, swapon, swapoff
- debugfs
- init

But it has to be split up such the moving still produces halfway
readable diffs.

In this patch, move pool allocation and freeing functions.

Link: https://lkml.kernel.org/r/20240130014208.565554-11-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: simplify zswap_invalidate()

The branching is awkward and duplicates code. The comment about
writeback is also misleading: yes, the entry might have been written
back. Or it might have never been stored in zswap to begin with due to
a rejection - zswap_invalidate() is called on all exiting swap entries.

Link: https://lkml.kernel.org/r/20240130014208.565554-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: further cleanup zswap_store()

- Remove dupentry, reusing entry works just fine.
- Rename pool to shrink_pool, as this one actually is confusing.
- Remove page, use folio_nid() and kmap_local_folio() directly.
- Set entry->swpentry in a common path.
- Move value and src to local scope of use.

Link: https://lkml.kernel.org/r/20240130014208.565554-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: break out zwap_compress()

zswap_store() is long and mixes work at the zswap layer with work at
the backend and compression layer. Move compression & backend work to
zswap_compress(), mirroring zswap_decompress().

Link: https://lkml.kernel.org/r/20240130014208.565554-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: rename __zswap_load() to zswap_decompress()

Link: https://lkml.kernel.org/r/20240130014208.565554-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: clean up zswap_entry_put()

Remove stale comment and unnecessary local variable.

Link: https://lkml.kernel.org/r/20240130014208.565554-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: warn when referencing a dead entry

Put a standard sanity check on zswap_entry_get() for UAF scenario.

Link: https://lkml.kernel.org/r/20240130014208.565554-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: move zswap_invalidate_entry() to related functions

Move it up to the other tree and refcounting functions.

Link: https://lkml.kernel.org/r/20240130014208.565554-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: inline and remove zswap_entry_find_get()

There is only one caller and the function is trivial. Inline it.

Link: https://lkml.kernel.org/r/20240130014208.565554-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>