linux-2.6-microblaze.git
4 years agodpaa_eth: Use random MAC address when none is given
Madalin Bucur [Thu, 5 Mar 2020 17:08:58 +0000 (19:08 +0200)]
dpaa_eth: Use random MAC address when none is given

If there is no valid MAC address in the device tree, use a random
MAC address.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agofsl/fman: tolerate missing MAC address in device tree
Madalin Bucur [Thu, 5 Mar 2020 17:08:57 +0000 (19:08 +0200)]
fsl/fman: tolerate missing MAC address in device tree

Allow the initialization of the MAC to be performed even if the
device tree does not provide a valid MAC address. Later a random
MAC address should be assigned by the Ethernet driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agofsl/fman: reuse set_mac_address() in dtsec init()
Madalin Bucur [Thu, 5 Mar 2020 17:08:56 +0000 (19:08 +0200)]
fsl/fman: reuse set_mac_address() in dtsec init()

Reuse the set_mac_address() in the init() function.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'bnxt_en-Updates'
David S. Miller [Mon, 9 Mar 2020 04:54:46 +0000 (21:54 -0700)]
Merge branch 'bnxt_en-Updates'

Michael Chan says:

====================
bnxt_en: Updates.

This series includes simplification and improvement of NAPI polling
logic in bnxt_poll_p5().  The improvements will prevent starving the
async events from firmware if we are in continuous NAPI polling.
The rest of the patches include cleanups, a better return code for
firmware busy, and to clear devlink port type more properly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Call devlink_port_type_clear() in remove()
Vasundhara Volam [Sun, 8 Mar 2020 22:45:54 +0000 (18:45 -0400)]
bnxt_en: Call devlink_port_type_clear() in remove()

Similar to other drivers, properly clear the devlink port type when
removing the device before unregistration.

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Return -EAGAIN if fw command returns BUSY
Vasundhara Volam [Sun, 8 Mar 2020 22:45:53 +0000 (18:45 -0400)]
bnxt_en: Return -EAGAIN if fw command returns BUSY

If firmware command returns error code as HWRM_ERR_CODE_BUSY, which
means it cannot handle the command due to a conflicting command
from another function, convert it to -EAGAIN.  If it is an ethtool
operation, this error code will be returned to userspace.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Modify some bnxt_hwrm_*_free() functions to void.
Vasundhara Volam [Sun, 8 Mar 2020 22:45:52 +0000 (18:45 -0400)]
bnxt_en: Modify some bnxt_hwrm_*_free() functions to void.

Return code is not needed in some of these functions, as the return
code from firmware message is ignored. Remove the unused rc variable
and also convert functions to void.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Remove unnecessary assignment of return code
Vasundhara Volam [Sun, 8 Mar 2020 22:45:51 +0000 (18:45 -0400)]
bnxt_en: Remove unnecessary assignment of return code

As part of converting error code in firmware message to standard
code, checking for firmware return code is removed in most of the
places. Remove the assignment of return code where the function
can directly return.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Clear DCB settings after firmware reset.
Michael Chan [Sun, 8 Mar 2020 22:45:50 +0000 (18:45 -0400)]
bnxt_en: Clear DCB settings after firmware reset.

The driver stores a copy of the DCB settings that have been applied to
the firmware.  After firmware reset, the firmware settings are gone and
will revert back to default.  Clear the driver's copy so that if there
is a DCBNL request to get the settings, the driver will retrieve the
current settings from the firmware.  lldpad keeps the DCB settings in
userspace and will re-apply the settings if it is running.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Process the NQ under NAPI continuous polling.
Michael Chan [Sun, 8 Mar 2020 22:45:49 +0000 (18:45 -0400)]
bnxt_en: Process the NQ under NAPI continuous polling.

When we are in continuous NAPI polling mode, the current code in
bnxt_poll_p5() will only process the completion rings and will not
process the NQ until interrupt is re-enabled.  Tis logic works and
will not cause RX or TX starvation, but async events in the NQ may
be delayed for the duration of continuous NAPI polling.  These
async events may be firmware or VF events.

Continue to handle the NQ after we are done polling the completion
rings.  This actually simplies the code in bnxt_poll_p5().

Acknowledge the NQ so these async events will not overflow.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Simplify __bnxt_poll_cqs_done().
Michael Chan [Sun, 8 Mar 2020 22:45:48 +0000 (18:45 -0400)]
bnxt_en: Simplify __bnxt_poll_cqs_done().

Simplify the function by removing tha 'all' parameter.  In the current
code, the caller has to specify whether to update/arm both completion
rings with the 'all' parameter.

Instead of this, we can just update/arm all the completion rings
that have been polled.  By setting cpr->had_work_done earlier in
__bnxt_poll_work(), we know which completion ring has been polled
and can just update/arm all the completion rings with
cpr->had_work_done set.

This simplifies the function with one less parameter and works just
as well.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Handle all NQ notifications in bnxt_poll_p5().
Michael Chan [Sun, 8 Mar 2020 22:45:47 +0000 (18:45 -0400)]
bnxt_en: Handle all NQ notifications in bnxt_poll_p5().

In bnxt_poll_p5(), the logic polls for up to 2 completion rings (RX and
TX) for work.  In the current code, if we reach budget polling the
first completion ring, we will stop.  If the other completion ring
has work to do, we will handle it when NAPI calls us back.

This is not optimal.  We potentially leave an unproceesed entry in
the NQ.  When we are finally done with NAPI polling and re-enable
interrupt, the remaining entry in the NQ will cause interrupt to
be triggered immediately for no reason.

Modify the code in bnxt_poll_p5() to keep looping until all NQ
entries are handled even if the first completion ring has reached
budget.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get
Eric Dumazet [Sun, 8 Mar 2020 21:27:48 +0000 (14:27 -0700)]
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get

Convert zones_lock spinlock to zones_mutex mutex,
and struct (tcf_ct_flow_table)->ref to a refcount,
so that control path can use regular GFP_KERNEL allocations
from standard process context. This is more robust
in case of memory pressure.

The refcount is needed because tcf_ct_flow_table_put() can
be called from RCU callback, thus in BH context.

The issue was spotted by syzbot, as rhashtable_init()
was called with a spinlock held, which is bad since GFP_KERNEL
allocations can sleep.

Note to developers : Please make sure your patches are tested
with CONFIG_DEBUG_ATOMIC_SLEEP=y

BUG: sleeping function called from invalid context at mm/slab.h:565
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610
2 locks held by syz-executor610/9582:
 #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
 #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437
 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
 #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798
 slab_pre_alloc_hook mm/slab.h:565 [inline]
 slab_alloc_node mm/slab.c:3227 [inline]
 kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593
 __do_kmalloc_node mm/slab.c:3615 [inline]
 __kmalloc_node+0x38/0x60 mm/slab.c:3623
 kmalloc_node include/linux/slab.h:578 [inline]
 kvmalloc_node+0x61/0xf0 mm/util.c:574
 kvmalloc include/linux/mm.h:645 [inline]
 kvzalloc include/linux/mm.h:653 [inline]
 bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175
 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054
 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498
 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82
 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050
 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945
 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001
 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411
 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440
 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343
 ___sys_sendmsg+0x100/0x170 net/socket.c:2397
 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430
 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4403d9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8
R10: 0000000000000008 R11: 00000000000

Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Blakey <paulb@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: rmnet: set NETIF_F_LLTX flag
Taehee Yoo [Sun, 8 Mar 2020 13:47:06 +0000 (13:47 +0000)]
net: rmnet: set NETIF_F_LLTX flag

The rmnet_vnd_setup(), which is the callback of ->ndo_start_xmit() is
allowed to call concurrently because it uses RCU protected data.
So, it doesn't need tx lock.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'bareudp-several-code-cleanup-for-bareudp-module'
David S. Miller [Mon, 9 Mar 2020 04:22:29 +0000 (21:22 -0700)]
Merge branch 'bareudp-several-code-cleanup-for-bareudp-module'

Taehee Yoo says:

====================
bareudp: several code cleanup for bareudp module

This patchset is to cleanup bareudp module code.

1. The first patch is to add module alias
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.

2. The second patch is to add extack message.
The extack error message is useful for noticing specific errors
when command is failed.

3. The third patch is to remove unnecessary udp_encap_enable().
In the bareudp_socket_create(), udp_encap_enable() is called.
But, the it's already called in the setup_udp_tunnel_sock().
So, it could be removed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()
Taehee Yoo [Sun, 8 Mar 2020 01:19:30 +0000 (01:19 +0000)]
bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()

In the current code, udp_encap_enable() is called in
bareudp_socket_create().
But, setup_udp_tunnel_sock() internally calls udp_encap_enable().
So, udp_encap_enable() is unnecessary.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobareudp: print error message when command fails
Taehee Yoo [Sun, 8 Mar 2020 01:19:17 +0000 (01:19 +0000)]
bareudp: print error message when command fails

When bareudp netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobareudp: add module alias
Taehee Yoo [Sun, 8 Mar 2020 01:19:07 +0000 (01:19 +0000)]
bareudp: add module alias

In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'cxgb4-chcr-ktls-tx-ofld-support-on-T6-adapter'
David S. Miller [Mon, 9 Mar 2020 04:16:24 +0000 (21:16 -0700)]
Merge branch 'cxgb4-chcr-ktls-tx-ofld-support-on-T6-adapter'

Rohit Maheshwari says:

====================
cxgb4/chcr: ktls tx ofld support on T6 adapter

This series of patches add support for kernel tls offload in Tx direction,
over Chelsio T6 NICs. SKBs marked as decrypted will be treated as tls plain
text packets and then offloaded to encrypt using network device (chelsio T6
adapter).

This series is broken down as follows:

Patch 1 defines a new macro and registers tls_dev_add and tls_dev_del
callbacks. When tls_dev_add gets called we send a connection request to
our hardware and to make HW understand about tls offload. Its a partial
connection setup and only ipv4 part is done.

Patch 2 handles the HW response of the connection request and then we
request to update TCB and handle it's HW response as well. Also we save
crypto key locally. Only supporting TLS_CIPHER_AES_GCM_128_KEY_SIZE.

Patch 3 handles tls marked skbs (decrypted bit set) and sends it to ULD for
crypto handling. This code has a minimal portion of tx handler, to handle
only one complete record per skb.

Patch 4 hanldes partial end part of records. Also added logic to handle
multiple records in one single skb. It also adds support to send out tcp
option(/s) if exists in skb. If a record is partial but has end part of a
record, we'll fetch complete record and then only send it to HW to generate
HASH on complete record.

Patch 5 handles partial first or middle part of record, it uses AES_CTR to
encrypt the partial record. If we are trying to send middle record, it's
start should be 16 byte aligned, so we'll fetch few earlier bytes from the
record and then send it to HW for encryption.

Patch 6 enables ipv6 support and also includes ktls startistics.

v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
- optimized tcb update using control queue.
- state machine handling when earlier states received.
- chcr_write_cpl_set_tcb_ulp  function is shifted to patch3.
- un-necessary updating left variable.

v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.

v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
- mss calculation logic.
- correct place for Alloc skb check.
- Replaced atomic_t with atomic64_t
- added few more statistics counters.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agocxgb4/chcr: Add ipv6 support and statistics
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:08 +0000 (20:06 +0530)]
cxgb4/chcr: Add ipv6 support and statistics

Adding ipv6 support and ktls related statistics.

v1->v2:
- added blank lines at 2 places.

v3->v4:
- Replaced atomic_t with atomic64_t
- added few necessary stat counters.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agochcr: Handle first or middle part of record
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:07 +0000 (20:06 +0530)]
chcr: Handle first or middle part of record

This patch contains handling of first part or middle part of the record.
When we get a middle record, we will fetch few already sent bytes to
make packet start 16 byte aligned.
And if the packet has only the header part, we don't need to send it for
packet encryption, send that packet as a plaintext.

v1->v2:
- un-necessary updating left variable.

v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agochcr: handle partial end part of a record
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:06 +0000 (20:06 +0530)]
chcr: handle partial end part of a record

TCP segment can chop a record in any order. Record can either be
complete or it can be partial (first part which contains header,
middle part which doesn't have header or TAG, and the end part
which contains TAG. This patch handles partial end part of a tx
record. In case of partial end part's, driver will send complete
record to HW, so that HW will calculate GHASH (TAG) of complete
packet.
Also added support to handle multiple records in a segment.

v1->v2:
- miner change in calling chcr_write_cpl_set_tcb_ulp.
- no need of checking return value of chcr_ktls_write_tcp_options.

v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agocxgb4/chcr: complete record tx handling
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:05 +0000 (20:06 +0530)]
cxgb4/chcr: complete record tx handling

Added tx handling in this patch. This includes handling of segments
contain single complete record.

v1->v2:
- chcr_write_cpl_set_tcb_ulp is added in this patch.

v3->v4:
- mss calculation logic.
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agocxgb4/chcr: Save tx keys and handle HW response
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:04 +0000 (20:06 +0530)]
cxgb4/chcr: Save tx keys and handle HW response

As part of this patch generated and saved crypto keys, handled HW
response of act_open_req and set_tcb_req. Defined connection state
update.

v1->v2:
- optimized tcb update using control queue.
- state machine handling when earlier states received.

v2->v3:
- Added one empty line after function declaration.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agocxgb4/chcr : Register to tls add and del callback
Rohit Maheshwari [Sat, 7 Mar 2020 14:36:03 +0000 (20:06 +0530)]
cxgb4/chcr : Register to tls add and del callback

A new macro is defined to enable ktls tx offload support on Chelsio
T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to
enable or disable ktls settings on HW.
In chcr, enabled tx offload flag in netdev and registered tls_dev_add
and tls_dev_del.

v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.

v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'net-allow-user-specify-TC-action-HW-stats-type'
David S. Miller [Mon, 9 Mar 2020 04:07:48 +0000 (21:07 -0700)]
Merge branch 'net-allow-user-specify-TC-action-HW-stats-type'

Jiri Pirko says:

====================
net: allow user specify TC action HW stats type

Currently, when user adds a TC action and the action gets offloaded,
the user expects the HW stats to be counted and included in stats dump.
However, since drivers may implement different types of counting, there
is no way to specify which one the user is interested in.

For example for mlx5, only delayed counters are available as the driver
periodically polls for updated stats.

In case of mlxsw, the counters are queried on dump time. However, the
HW resources for this type of counters is quite limited (couple of
thousands). This limits the amount of supported offloaded filters
significantly. Without counter assigned, the HW is capable to carry
millions of those.

On top of that, mlxsw HW is able to support delayed counters as well in
greater numbers. That is going to be added in a follow-up patch.

This patchset allows user to specify one of the following types of HW
stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner
disabled - no stats needed

Note that if "hw_stats" option is not passed, user does not care about
the type, just expects any type of stats.

Examples:
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
  eth_type ipv4
  dst_ip 192.168.1.1
  skip_sw
  in_hw in_hw_count 2
        action order 1: gact action drop
         random type none pass val 0
         index 1 ref 1 bind 1 installed 7 sec used 2 sec
        Action statistics:
        Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        hw_stats disabled

$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
  eth_type ipv4
  dst_ip 192.168.1.1
  skip_sw
  in_hw in_hw_count 2
        action order 1: gact action drop
         random type none pass val 0
         index 1 ref 1 bind 1 installed 11 sec used 4 sec
        Action statistics:
        Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
        Sent software 0 bytes 0 pkt
        Sent hardware 102 bytes 1 pkt
        backlog 0b 0p requeues 0
        hw_stats immediate
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agosched: act: allow user to specify type of HW stats for a filter
Jiri Pirko [Sat, 7 Mar 2020 11:40:20 +0000 (12:40 +0100)]
sched: act: allow user to specify type of HW stats for a filter

Currently, user who is adding an action expects HW to report stats,
however it does not have exact expectations about the stats types.
That is aligned with TCA_ACT_HW_STATS_TYPE_ANY.

Allow user to specify the type of HW stats for an action and require it.

Pass the information down to flow_offload layer.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoflow_offload: introduce "disabled" HW stats type and allow it in mlxsw
Jiri Pirko [Sat, 7 Mar 2020 11:40:19 +0000 (12:40 +0100)]
flow_offload: introduce "disabled" HW stats type and allow it in mlxsw

Introduce new type for disabled HW stats and allow the value in
mlxsw offload.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: spectrum_acl: Ask device for rule stats only if counter was created
Jiri Pirko [Sat, 7 Mar 2020 11:40:18 +0000 (12:40 +0100)]
mlxsw: spectrum_acl: Ask device for rule stats only if counter was created

Set a flag in case rule counter was created. Only query the device for
stats of a rule, which has the valid counter assigned.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoflow_offload: introduce "delayed" HW stats type and allow it in mlx5
Jiri Pirko [Sat, 7 Mar 2020 11:40:17 +0000 (12:40 +0100)]
flow_offload: introduce "delayed" HW stats type and allow it in mlx5

Introduce new type for delayed HW stats and allow the value in
mlx5 offload.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoflow_offload: introduce "immediate" HW stats type and allow it in mlxsw
Jiri Pirko [Sat, 7 Mar 2020 11:40:16 +0000 (12:40 +0100)]
flow_offload: introduce "immediate" HW stats type and allow it in mlxsw

Introduce new type for immediate HW stats and allow the value in
mlxsw offload.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: restrict supported HW stats type to "any"
Jiri Pirko [Sat, 7 Mar 2020 11:40:15 +0000 (12:40 +0100)]
mlxsw: restrict supported HW stats type to "any"

Currently don't allow actions with any other type to be inserted.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: spectrum_flower: Do not allow mixing HW stats types for actions
Jiri Pirko [Sat, 7 Mar 2020 11:40:14 +0000 (12:40 +0100)]
mlxsw: spectrum_flower: Do not allow mixing HW stats types for actions

As there is one set of counters for the whole action chain, forbid to
mix the HW stats types.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoflow_offload: check for basic action hw stats type
Jiri Pirko [Sat, 7 Mar 2020 11:40:13 +0000 (12:40 +0100)]
flow_offload: check for basic action hw stats type

Introduce flow_action_basic_hw_stats_types_check() helper and use it
in drivers. That sanitizes the drivers which do not have support
for action HW stats types.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoocelot_flower: use flow_offload_has_one_action() helper
Jiri Pirko [Sat, 7 Mar 2020 11:40:12 +0000 (12:40 +0100)]
ocelot_flower: use flow_offload_has_one_action() helper

Instead of directly checking number of action entries, use
flow_offload_has_one_action() helper.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoflow_offload: Introduce offload of HW stats type
Jiri Pirko [Sat, 7 Mar 2020 11:40:11 +0000 (12:40 +0100)]
flow_offload: Introduce offload of HW stats type

Initially, pass "ANY" (struct is zeroed) to the drivers as that is the
current implicit value coming down to flow_offload. Add a bool
indicating that entries have mixed HW stats type.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'ethtool-consolidate-irq-coalescing-other-drivers'
David S. Miller [Sat, 7 Mar 2020 06:45:56 +0000 (22:45 -0800)]
Merge branch 'ethtool-consolidate-irq-coalescing-other-drivers'

Jakub Kicinski says:

====================
ethtool: consolidate irq coalescing - other drivers

Convert more drivers following the groundwork laid in a recent
patch set [1]. The aim of the effort is to consolidate irq
coalescing parameter validation in the core.

This set converts all the drivers outside of drivers/net/ethernet.

Only vmxnet3 them was checking unsupported parameters.

The aim is to merge this via the net-next tree so we can
convert all drivers and make the checking mandatory.

[1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agowil6210: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:06:02 +0000 (17:06 -0800)]
wil6210: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agostaging: qlge: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:06:01 +0000 (17:06 -0800)]
staging: qlge: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agovmxnet3: let core reject the unsupported coalescing parameters
Jakub Kicinski [Fri, 6 Mar 2020 01:06:00 +0000 (17:06 -0800)]
vmxnet3: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agor8152: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:05:59 +0000 (17:05 -0800)]
r8152: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:05:58 +0000 (17:05 -0800)]
tun: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoRDMA/ipoib: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:05:57 +0000 (17:05 -0800)]
RDMA/ipoib: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoum: reject unsupported coalescing params
Jakub Kicinski [Fri, 6 Mar 2020 01:05:56 +0000 (17:05 -0800)]
um: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agodt-bindings: net: Add ipq806x mdio bindings
Ansuel Smith [Wed, 4 Mar 2020 21:38:33 +0000 (22:38 +0100)]
dt-bindings: net: Add ipq806x mdio bindings

Add documentations for ipq806x mdio driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: mdio: add ipq8064 mdio driver
Ansuel Smith [Wed, 4 Mar 2020 21:38:32 +0000 (22:38 +0100)]
net: mdio: add ipq8064 mdio driver

Currently ipq806x soc use generic bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.

Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'tun-debug'
David S. Miller [Fri, 6 Mar 2020 05:38:03 +0000 (21:38 -0800)]
Merge branch 'tun-debug'

Michal Kubecek says:

====================
tun: debug messages cleanup

While testing ethtool output for "strange" devices, I noticed confusing and
obviously incorrect message level information for a tun device and sent
a quick fix. The result of the upstream discussion was that tun driver
would rather deserve a more complex cleanup of the way it handles debug
messages.

The main problem is that all debugging statements and setting of message
level are controlled by TUN_DEBUG macro which is only defined if one edits
the source and rebuilds the module, otherwise all DBG1() and tun_debug()
statements do nothing.

This series drops the TUN_DEBUG switch and replaces custom tun_debug()
macro with standard netif_info() so that message level (mask) set and
displayed using ethtool works as expected. Some debugging messages are
dropped as they only notify about entering a function which can be done
easily using ftrace or kprobe.

Patch 1 is a trivial fix for compilation warning with W=1.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: drop TUN_DEBUG and tun_debug()
Michal Kubecek [Wed, 4 Mar 2020 16:24:20 +0000 (17:24 +0100)]
tun: drop TUN_DEBUG and tun_debug()

TUN_DEBUG and tun_debug() are no longer used anywhere, drop them.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: replace tun_debug() by netif_info()
Michal Kubecek [Wed, 4 Mar 2020 16:24:14 +0000 (17:24 +0100)]
tun: replace tun_debug() by netif_info()

The tun driver uses custom macro tun_debug() which is only available if
TUN_DEBUG is set. Replace it by standard netif_ifinfo(). For that purpose,
rename tun_struct::debug to msg_enable and make it u32 and always present.
Finally, make tun_get_msglevel(), tun_set_msglevel() and TUNSETDEBUG ioctl
independent of TUN_DEBUG.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: drop useless debugging statements
Michal Kubecek [Wed, 4 Mar 2020 16:24:09 +0000 (17:24 +0100)]
tun: drop useless debugging statements

Some of the tun_debug() statements only inform us about entering
a function which can be easily achieved with ftrace or kprobe. As
tun_debug() is no-op unless TUN_DEBUG is set which requires editing the
source and recompiling, setting up ftrace or kprobe is easier. Drop these
debug statements.

Also drop the tun_debug() statement informing about SIOCSIFHWADDR ioctl.
We can monitor these through rtnetlink and it makes little sense to log
address changes through ioctl but not changes through rtnetlink. Moreover,
this tun_debug() is called even if the actual address change fails which
makes it even less useful.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: get rid of DBG1() macro
Michal Kubecek [Wed, 4 Mar 2020 16:24:04 +0000 (17:24 +0100)]
tun: get rid of DBG1() macro

This macro is no-op unless TUN_DEBUG is defined (which requires editing and
recompiling the source) and only does something if variable debug is 2 but
that variable is zero initialized and never set to anything else. Moreover,
the only use of the macro informs about entering function tun_chr_open()
which can be easily achieved using ftrace or kprobe.

Drop DBG1() macro, its only use and global variable debug.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotun: fix misleading comment format
Michal Kubecek [Wed, 4 Mar 2020 16:23:59 +0000 (17:23 +0100)]
tun: fix misleading comment format

The comment above tun_flow_save_rps_rxhash() starts with "/**" which
makes it look like kerneldoc comment and results in warnings when
building with W=1. Fix the format to make it look like a normal comment.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotc-testing: updated tdc tests for basic filter with canid extended match rules
Roman Mashak [Wed, 4 Mar 2020 12:55:47 +0000 (07:55 -0500)]
tc-testing: updated tdc tests for basic filter with canid extended match rules

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotc-testing: list kernel options for basic filter with canid ematch.
Roman Mashak [Wed, 4 Mar 2020 12:55:46 +0000 (07:55 -0500)]
tc-testing: list kernel options for basic filter with canid ematch.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'PCI-Implement-function-to-read-Device-Serial-Number'
David S. Miller [Fri, 6 Mar 2020 01:37:46 +0000 (17:37 -0800)]
Merge branch 'PCI-Implement-function-to-read-Device-Serial-Number'

Jacob Keller says:

====================
PCI: Implement function to read Device Serial Number

Several drivers read the Device Serial Number from the PCIe extended
configuration space. Each of these drivers implements a similar approach to
finding the position and then extracting the 8 bytes of data.

Implement a new helper function, pci_get_dsn, which can be used to extract
this data into an 8 byte array.

Modify the bnxt_en, qedf, ice, ixgbe and nfp drivers to use this new
function.

The intent for this is to reduce duplicate code across the various drivers,
and make it easier to write future code that wants to read the DSN. In
particular the ice driver will be using the DSN as its serial number when
implementing the DEVLINK_CMD_INFO_GET.

The new implementation in v2 significantly simplifies some of the callers
which just want to print the value out in MSB order. By returning things as
a u64 in CPU Endian order, the "%016llX" printf format specifier can be used
to correctly format the value.

Per patch changes since v1
  PCI: Introduce pci_get_dsn
  * Update commit message based on feedback from Bjorn Helgaas
  * Modify the function to return a u64 (zero on no capability)
  * This new implementation ensures that the first dword is the lower 32
    bits and the second dword is the upper 32 bits.

  bnxt_en: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * Copy it into the dsn[] array by using put_unaligned_le64
  * Fix a pre-existing typo in the netdev_info error message

  scsi: qedf: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"
  * remove the unused 'i' variable

  ice: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"

  ixgbe: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"

  nfp: Use pci_get_dsn()
  * Added in v2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonfp: Use pci_get_dsn()
Jacob Keller [Tue, 3 Mar 2020 02:25:05 +0000 (18:25 -0800)]
nfp: Use pci_get_dsn()

Use the newly added pci_get_dsn() function for obtaining the 64-bit
Device Serial Number in the nfp6000_read_serial and
nfp_6000_get_interface functions.

pci_get_dsn() reports the Device Serial number as a u64 value created by
combining two pci_read_config_dword functions. The lower 16 bits
represent the device interface value, and the next 48 bits represent the
serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert
the serial value portion into a Big Endian formatted serial u8 array.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoixgbe: Use pci_get_dsn()
Jacob Keller [Tue, 3 Mar 2020 02:25:04 +0000 (18:25 -0800)]
ixgbe: Use pci_get_dsn()

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a simple for-loop to read the bytes in order into
a buffer one byte at a time.

The pci_get_dsn() function returns the DSN as a u64, correctly ordering
the upper and lower 32 bit dwords. Simplify the display code by using
%016llX to display the u64 DSN.

This should have equivalent behavior on both Little and Big Endian
systems. The bus will have correctly ordered the dwords in the CPU
endian format, while pci_get_dsn() will correctly order the lower and
higher dwords into a u64.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoice: Use pci_get_dsn()
Jacob Keller [Tue, 3 Mar 2020 02:25:03 +0000 (18:25 -0800)]
ice: Use pci_get_dsn()

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The pci_get_dsn() function will perform two pci_read_config_dword calls
to read the lower and upper config dwords. It bitwise ORs them into
a u64 value. Instead of using put_unaligned_le32 to convert the value to
LE32 format, just use the %016llX printf specifier. This will print the
u64 correct, putting the most significant byte of the value first. Since
pci_get_dsn() correctly orders the two dwords into a u64, this should
produce equivalent results in less code.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoscsi: qedf: Use pci_get_dsn()
Jacob Keller [Tue, 3 Mar 2020 02:25:02 +0000 (18:25 -0800)]
scsi: qedf: Use pci_get_dsn()

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt_en: Use pci_get_dsn()
Jacob Keller [Tue, 3 Mar 2020 02:25:01 +0000 (18:25 -0800)]
bnxt_en: Use pci_get_dsn()

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform
two pci_read_config_dword calls. The first dword will be placed in the
first 32 bits of the u64, while the second dword will be placed in the
upper 32 bits of the u64.

On Little Endian systems, the least significant byte comes first, which
will be the least significant byte of the first dword, followed by the
least significant byte of the second dword. Since the _le32 variations
do not perform byte swapping, we will correctly copy the dwords into the
dsn[] array in the same order as before.

On Big Endian systems, the most significant byte of the second dword
will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which
will swap things correctly before copying. This should also end up with
the correct bytes in the dsn[] array.

While at it, fix a small typo in the netdev_info error message when the
DSN cannot be read.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoPCI: Introduce pci_get_dsn
Jacob Keller [Tue, 3 Mar 2020 02:25:00 +0000 (18:25 -0800)]
PCI: Introduce pci_get_dsn

Several device drivers read their Device Serial Number from the PCIe
extended config space.

Introduce a new helper function, pci_get_dsn(). This function reads the
eight bytes of the DSN and returns them as a u64. If the capability does not
exist for the device, the function returns 0.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoibmveth: Remove unused page_offset macro
Matthew Wilcox (Oracle) [Wed, 4 Mar 2020 03:54:55 +0000 (19:54 -0800)]
ibmveth: Remove unused page_offset macro

We already have a function called page_offset(), and this macro
is unused, so just delete it.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoptp: add VMware virtual PTP clock driver
Vivek Thampi [Fri, 28 Feb 2020 05:32:46 +0000 (05:32 +0000)]
ptp: add VMware virtual PTP clock driver

Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi
hypervisor. The driver attaches to a VMware virtual device called
"precision clock" that provides a mechanism for querying host system time.
Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw
utilizes the kernel's PTP hardware clock API to implement a clock device
that can be used as a reference in Chrony for synchronizing guest time with
host.

The driver is only applicable to x86 guests running in VMware virtual
machines with precision clock virtual device present. It uses a VMware
specific hypercall mechanism to read time from the device.

Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Vivek Thampi <vithampi@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge tag 'wireless-drivers-next-2020-03-05' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Thu, 5 Mar 2020 23:08:10 +0000 (15:08 -0800)]
Merge tag 'wireless-drivers-next-2020-03-05' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.7

First set of patches for v5.7. Lots of mt76 patches as they missed the
v5.6 deadline and hence they were postponed to the next version.
Otherwise nothing special standing out.

mt76

Major changes:

* dual-band concurrent support for MT7615

* fixes for rx path race conditions

* coverage class support for MT7615

* beacon fixes for USB devices

* MT7615 LED support

* set_antenna support for MT7615

* tracing improvements

* preparation for supporting new USB devices

* tx power fixes

brcmfmac

* support BRCM 4364 found in MacBook Pro 15,2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobcm63xx_enet: remove redundant variable definitions
tangbin [Thu, 5 Mar 2020 12:22:59 +0000 (20:22 +0800)]
bcm63xx_enet: remove redundant variable definitions

in this function,‘ret’ is always assigned,so this's definition
'ret = 0' make no sense.

Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: tulip: Replace zero-length array with flexible-array member
Gustavo A. R. Silva [Thu, 5 Mar 2020 11:06:44 +0000 (05:06 -0600)]
net: tulip: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'mlxsw-Offload-FIFO'
David S. Miller [Thu, 5 Mar 2020 22:03:32 +0000 (14:03 -0800)]
Merge branch 'mlxsw-Offload-FIFO'

Ido Schimmel says:

====================
mlxsw: Offload FIFO

Petr says:

If an ETS or PRIO band contains an offloaded qdisc, it is possible to
obtain offloaded counters for that band. However, some of the bands will
likely simply contain the default invisible FIFO qdisc, which does not
present the counters.

To remedy this situation, make FIFO offloadable, and offload it by mlxsw
when below PRIO and ETS for the sole purpose of providing counters for the
bands that do not include other qdiscs.

- In patch #1, FIFO is extended to support offloading.
- Patches #2 and #3 restructure bits of mlxsw to facilitate
  the offload logic.
- Patch #4 then implements the offload itself.
- Patch #5 changes the ETS selftest to use the new counters.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoselftests: forwarding: ETS: Use Qdisc counters
Petr Machata [Thu, 5 Mar 2020 07:16:44 +0000 (09:16 +0200)]
selftests: forwarding: ETS: Use Qdisc counters

Currently the SW-datapath ETS selftests use "ip link" stats to obtain the
number of packets that went through a given band. mlxsw then uses ethtool
per-priority counters.

Instead, change both to use qdiscs. In SW datapath this is the obvious
choice, and now that mlxsw offloads FIFO, this should work on the offloaded
datapath as well. This has the effect of verifying that the FIFO offload
works.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: spectrum_qdisc: Support offloading of FIFO Qdisc
Petr Machata [Thu, 5 Mar 2020 07:16:43 +0000 (09:16 +0200)]
mlxsw: spectrum_qdisc: Support offloading of FIFO Qdisc

There are two peculiarities about offloading FIFO:

- sometimes the qdisc has an unspecified handle (it is "invisible")
- it may be created before the qdisc that it will be a child of

These features make the offload a bit more tricky. The approach chosen in
this patch is to make note of all the FIFOs that needed to be rejected
because their parents were not known. Later when the parent is created,
they are offloaded

FIFO is only offloaded for its counters, queue length is ignored.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: spectrum_qdisc: Add handle parameter to ..._ops.replace
Petr Machata [Thu, 5 Mar 2020 07:16:42 +0000 (09:16 +0200)]
mlxsw: spectrum_qdisc: Add handle parameter to ..._ops.replace

PRIO and ETS will need to check the value of qdisc handle in their
handlers. Add it to the callback and propagate through.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlxsw: spectrum_qdisc: Introduce struct mlxsw_sp_qdisc_state
Petr Machata [Thu, 5 Mar 2020 07:16:41 +0000 (09:16 +0200)]
mlxsw: spectrum_qdisc: Introduce struct mlxsw_sp_qdisc_state

In order to have a tidy structure where to put information related to Qdisc
offloads, introduce a new structure. Move there the two existing pieces of
data: root_qdisc and tclass_qdiscs. Embed them directly, because there's no
reason to go through pointer anymore. Convert users, update init/fini
functions.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: sched: Make FIFO Qdisc offloadable
Petr Machata [Thu, 5 Mar 2020 07:16:40 +0000 (09:16 +0200)]
net: sched: Make FIFO Qdisc offloadable

Invoke ndo_setup_tc() as appropriate to signal init / replacement,
destroying and dumping of pFIFO / bFIFO Qdisc.

A lot of the FIFO logic is used for pFIFO_head_drop as well, but that's a
semantically very different Qdisc that isn't really in the same boat as
pFIFO / bFIFO. Split some of the functions to keep the Qdisc intact.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'ethtool-consolidate-parameter-checking-for-irq-coalescing'
David S. Miller [Thu, 5 Mar 2020 20:12:35 +0000 (12:12 -0800)]
Merge branch 'ethtool-consolidate-parameter-checking-for-irq-coalescing'

Jakub Kicinski says:

====================
ethtool: consolidate parameter checking for irq coalescing

This set aims to simplify and unify the unsupported irq
coalescing parameter handling.

First patch adds a bitmask which drivers should fill in
in their ethtool_ops structs to declare which parameters
they support. Core will then ensure that driver callback
won't see any parameter outside of that set.

This allows us to save some LoC and make sure all drivers
respond the same to unsupported parameters.

If any parameter driver does not support is set to a value
other than 0 core will return -EINVAL. In the future we can
reject any present but unsupported netlink attribute, without
assuming 0 means unset. We can also add some prints or extack,
perhaps a'la Intel's current code.

I started converting the drivers alphabetically but then
realized that for the first set it's probably best to
address a representative mix of actively developed drivers.

According to my unreliable math there are roughly 69 drivers
in the tree which support some form of interrupt coalescing
settings via ethtool. Of these roughly 17 reject parameters
they don't support.

I hope drivers which ignore the parameters don't care, and
won't care about the slight change in behavior. Once all
drivers are converted we can make the checking mandatory.

I've only tested the e1000e and virtio patches, the rest builds.

v2: fix up ice and virtio conversions
v3: (patch 1)
    - move the (temporary) check if driver defines types
      earlier (Michal)
    - rename used_types -> nonzero_params, and
      coalesce_types -> supported_coalesce_params (Alex)
    - use EOPNOTSUPP instead of EINVAL (Andrew, Michal)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agovirtio_net: reject unsupported coalescing params
Jakub Kicinski [Thu, 5 Mar 2020 05:15:42 +0000 (21:15 -0800)]
virtio_net: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.

v2: correctly handle rx-frames (and adjust the commit msg)
v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoe1000e: reject unsupported coalescing params
Jakub Kicinski [Thu, 5 Mar 2020 05:15:41 +0000 (21:15 -0800)]
e1000e: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agomlx5: reject unsupported coalescing params
Jakub Kicinski [Thu, 5 Mar 2020 05:15:40 +0000 (21:15 -0800)]
mlx5: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agobnxt: reject unsupported coalescing params
Jakub Kicinski [Thu, 5 Mar 2020 05:15:39 +0000 (21:15 -0800)]
bnxt: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoice: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:38 +0000 (21:15 -0800)]
ice: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the info message about
the bad parameter will no longer be printed. We also
always reject the tx_coalesce_usecs_high param, even
if the target queue pair does not have a TX queue.
Error code changes from EINVAL to EOPNOTSUPP.

v2: allow adaptive TX
v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agohisilicon: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:37 +0000 (21:15 -0800)]
hisilicon: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoionic: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:36 +0000 (21:15 -0800)]
ionic: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonfp: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:35 +0000 (21:15 -0800)]
nfp: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agostmmac: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:34 +0000 (21:15 -0800)]
stmmac: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoenic: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:33 +0000 (21:15 -0800)]
enic: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
The error code changes from EINVAL to EOPNOTSUPP.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoxgbe: let core reject the unsupported coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:32 +0000 (21:15 -0800)]
xgbe: let core reject the unsupported coalescing parameters

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
We are only losing the error print.

v3: adjust commit message for new error code and member name

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoethtool: add infrastructure for centralized checking of coalescing parameters
Jakub Kicinski [Thu, 5 Mar 2020 05:15:31 +0000 (21:15 -0800)]
ethtool: add infrastructure for centralized checking of coalescing parameters

Linux supports 22 different interrupt coalescing parameters.
No driver implements them all. Some drivers just ignore the
ones they don't support, while others have to carry a long
list of checks to reject unsupported settings.

To simplify the drivers add the ability to specify inside
ethtool_ops which parameters are supported and let the core
reject attempts to set any other one.

This commit makes the mechanism an opt-in, only drivers which
set ethtool_opts->coalesce_types to a non-zero value will have
the checks enforced.

The same mask is used for global and per queue settings.

v3: - move the (temporary) check if driver defines types
      earlier (Michal)
    - rename used_types -> nonzero_params, and
      coalesce_types -> supported_coalesce_params (Alex)
    - use EOPNOTSUPP instead of EINVAL (Andrew, Michal)

Leaving the long series of ifs for now, it seems nice to
be able to grep for the field and flag names. This will
probably have to be revisited once netlink support lands.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agohsr: fix refcnt leak of hsr slave interface
Taehee Yoo [Thu, 5 Mar 2020 00:02:54 +0000 (00:02 +0000)]
hsr: fix refcnt leak of hsr slave interface

In the commit e0a4b99773d3 ("hsr: use upper/lower device infrastructure"),
dev_get() was removed but dev_put() in the error path wasn't removed.
So, if creating hsr interface command is failed, the reference counter leak
of lower interface would occur.

Test commands:
    ip link add dummy0 type dummy
    ip link add ipvlan0 link dummy0 type ipvlan mode l2
    ip link add ipvlan1 link dummy0 type ipvlan mode l2
    ip link add hsr0 type hsr slave1 ipvlan0 slave2 ipvlan1
    ip link del ipvlan0

Result:
[  633.271992][ T1280] unregister_netdevice: waiting for ipvlan0 to become free. Usage count = -1

Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'rmnet-cleanups'
David S. Miller [Thu, 5 Mar 2020 19:47:10 +0000 (11:47 -0800)]
Merge branch 'rmnet-cleanups'

Taehee Yoo says:

====================
net: rmnet: several code cleanup for rmnet module

This patchset is to cleanup rmnet module code.

1. The first patch is to add module alias
rmnet module can not be loaded automatically because there is no
alias name.

2. The second patch is to add extack error message code.
When rmnet netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.

3. The third patch is to use GFP_KERNEL instead of GFP_ATOMIC.
In the sleepable context, GFP_KERNEL can be used.
So, in this patch, GFP_KERNEL is used instead of GFP_ATOMIC.

Change log:
 - v1->v2: change error message in the second patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: rmnet: use GFP_KERNEL instead of GFP_ATOMIC
Taehee Yoo [Wed, 4 Mar 2020 23:25:43 +0000 (23:25 +0000)]
net: rmnet: use GFP_KERNEL instead of GFP_ATOMIC

In the current code, rmnet_register_real_device() and rmnet_newlink()
are using GFP_ATOMIC.
But, these functions are allowed to sleep.
So, GFP_KERNEL can be used.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: rmnet: print error message when command fails
Taehee Yoo [Wed, 4 Mar 2020 23:25:22 +0000 (23:25 +0000)]
net: rmnet: print error message when command fails

When rmnet netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: rmnet: add missing module alias
Taehee Yoo [Wed, 4 Mar 2020 23:24:42 +0000 (23:24 +0000)]
net: rmnet: add missing module alias

In the current rmnet code, there is no module alias.
So, RTNL couldn't load rmnet module automatically.

Test commands:
    ip link add dummy0 type dummy
    modprobe -rv rmnet
    ip link add rmnet0 link dummy0 type rmnet  mux_id 1

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'marvell10g-tunable-and-power-saving-support'
David S. Miller [Wed, 4 Mar 2020 22:41:52 +0000 (14:41 -0800)]
Merge branch 'marvell10g-tunable-and-power-saving-support'

Russell King says:

====================
marvell10g tunable and power saving support

This patch series adds support for:
- mdix configuration (auto, mdi, mdix)
- energy detect power down (edpd)
- placing in edpd mode at probe

for both the 88x3310 and 88x2110 PHYs.

Antione, could you test this for the 88x2110 PHY please?

v3: fix return code in get_tunable/set_tunable
v2: fix comments from Antione.
====================

Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: phy: marvell10g: place in powersave mode at probe
Russell King [Tue, 3 Mar 2020 18:08:45 +0000 (18:08 +0000)]
net: phy: marvell10g: place in powersave mode at probe

Place the 88x3310 into powersaving mode when probing, which saves 600mW
per PHY. For both PHYs on the Macchiatobin double-shot, this saves
about 10% of the board idle power.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: phy: marvell10g: add energy detect power down tunable
Russell King [Tue, 3 Mar 2020 18:08:40 +0000 (18:08 +0000)]
net: phy: marvell10g: add energy detect power down tunable

Add support for the energy detect power down tunable, which saves
around 600mW when the link is down. The 88x3310 supports off, rx-only
and NLP every second. Enable EDPD by default for 88x3310.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: phy: marvell10g: add mdix control
Russell King [Tue, 3 Mar 2020 18:08:34 +0000 (18:08 +0000)]
net: phy: marvell10g: add mdix control

Add support for controlling the MDI-X state of the PHY.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch 'PCI-Add-and-use-constant-PCI_STATUS_ERROR_BITS-and-helper-pci_status_ge...
David S. Miller [Wed, 4 Mar 2020 22:21:00 +0000 (14:21 -0800)]
Merge branch 'PCI-Add-and-use-constant-PCI_STATUS_ERROR_BITS-and-helper-pci_status_get_and_clear_errors'

Heiner Kallweit says:

====================
PCI: Add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors

Several drivers have own definitions for this constant, so move it
to the PCI core. In addition in multiple places the following code
sequence is used:
1. Read PCI_STATUS
2. Mask out non-error bits
3. Action based on set error bits
4. Write back set error bits to clear them

As this is a repeated pattern, add a helper to the PCI core.

Most affected drivers are network drivers. But as it's about core
PCI functionality, I suppose the series should go through the PCI
tree.

v2:
- fix formal issue with cover letter
v3:
- fix dumb typo in patch 7
v4:
- add patches 1-3
- move new constant PCI_STATUS_ERROR_BITS to include/linux/pci.h
- small improvements in commit messages
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agosound: bt87x: use pci_status_get_and_clear_errors
Heiner Kallweit [Sat, 29 Feb 2020 22:29:07 +0000 (23:29 +0100)]
sound: bt87x: use pci_status_get_and_clear_errors

Use new helper pci_status_get_and_clear_errors() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoPCI: pci-bridge-emul: Use new constant PCI_STATUS_ERROR_BITS
Heiner Kallweit [Sat, 29 Feb 2020 22:28:18 +0000 (23:28 +0100)]
PCI: pci-bridge-emul: Use new constant PCI_STATUS_ERROR_BITS

Use new constant PCI_STATUS_ERROR_BITS to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: skfp: use new constant PCI_STATUS_ERROR_BITS
Heiner Kallweit [Sat, 29 Feb 2020 22:27:34 +0000 (23:27 +0100)]
net: skfp: use new constant PCI_STATUS_ERROR_BITS

Use new PCI core constant PCI_STATUS_ERROR_BITS to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: sun: use pci_status_get_and_clear_errors
Heiner Kallweit [Sat, 29 Feb 2020 22:26:49 +0000 (23:26 +0100)]
net: sun: use pci_status_get_and_clear_errors

Use new helper pci_status_get_and_clear_errors() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agor8169: use pci_status_get_and_clear_errors
Heiner Kallweit [Sat, 29 Feb 2020 22:25:05 +0000 (23:25 +0100)]
r8169: use pci_status_get_and_clear_errors

Use new helper pci_status_get_and_clear_errors() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>