Sreekanth Reddy [Thu, 26 Dec 2019 11:13:33 +0000 (06:13 -0500)]
scsi: mpt3sas: Update drive version to 33.100.00.00
Update mpt3sas driver version from 32.100.00.00 to 33.100.00.00
Link: https://lore.kernel.org/r/20191226111333.26131-11-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:32 +0000 (06:13 -0500)]
scsi: mpt3sas: Remove usage of device_busy counter
Remove usage of device_busy counter from driver. Instead of device_busy
counter now driver uses 'nr_active' counter of request_queue to get the
number of inflight request for a LUN.
Link: https://lore.kernel.org/r/20191226111333.26131-10-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:31 +0000 (06:13 -0500)]
scsi: mpt3sas: Print function name in which cmd timed out
Print the function name in which MPT command got timed out. This will
facilitate debugging in which path corresponding MPT command got timeout in
first failure instance of log itself.
Link: https://lore.kernel.org/r/20191226111333.26131-9-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:30 +0000 (06:13 -0500)]
scsi: mpt3sas: Optimize mpt3sas driver logging
This improves mpt3sas driver default debug information collection and
allows for a higher percentage of issues being able to be resolved with a
first-time data capture. However, this improvement to balance the amount
of debug data captured with the performance of driver.
Enabled below print messages with out affecting the IO performance,
1. When task abort TM is received then print IO commands's timeout value
and how much time this command has been outstanding.
2. Whenever hard reset occurs then print from where this hard reset has
been issued.
3. Failure message should be displayed for failure scenarios without any
logging level.
4. Added a print after driver successfully register or unregistered a
target drive with the SML. This print will be useful for debugging the
issue where the drive addition or deletion is hanging at SML.
5. During driver load time print request, reply, sense and config page
pool's information such as its address, length and size. Also printed
sg_tablesize information.
Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:29 +0000 (06:13 -0500)]
scsi: mpt3sas: print in which path firmware fault occurred
When Firmware fault occurs then print in which path firmware fault has
occurred. This will be useful while debugging the firmware fault issues.
Link: https://lore.kernel.org/r/20191226111333.26131-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:28 +0000 (06:13 -0500)]
scsi: mpt3sas: Handle CoreDump state from watchdog thread
Watchdog thread polls for IOC state every 1 second. If it detects that IOC
state is in CoreDump state then it immediately stops the IOs and also
clears the outstanding commands issued to the HBA firmware and then it will
poll for IOC state to be out of CoreDump state and once it detects that IOC
state is changed from CoreDump state to Fault state (or) CoreDumpTOSec
number of seconds are elapsed then it will issue host reset operation and
moves the IOC state to Operational state and resumes the IOs.
Whenever any TM is received from SML then if driver detects the IOC state
is in CoreDump state then it will wait for CoreDump state to be cleared and
will host reset operation.
Link: https://lore.kernel.org/r/20191226111333.26131-6-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:27 +0000 (06:13 -0500)]
scsi: mpt3sas: Add support IOCs new state named COREDUMP
New feature is added in HBA firmware where it copies the collected firmware
logs in flash region named 'CoreDump' whenever HBA firmware faults occur.
For copying the logs to CoreDump flash region firmware needs some time and
hence it has introduced a new IOC state named "CoreDump" State.
Whenever driver detects the CoreDump state then it means that some firmware
fault has occurred and firmware is copying the logs to the coredump flash
region. During this time driver should not perform any operation with the
HBA, driver should wait for HBA firmware to move the IOC state from
'CoreDump' state to 'Fault' state once it's done with copying the logs to
coredump region. Once driver detects the Fault state then it will issue the
diag reset/host reset operation to move the IOC state from Fault to
Operational state.
Here the valid IOC state transactions w.r.t to this CoreDump state feature,
Operational -> Fault:
The IOC transitions to the Fault state when an operational error occurs AND
CoreDump is not supported (or disabled) by the firmware(FW).
Operational -> CoreDump:
The IOC transitions to the CoreDump state when an operational error occurs
AND CoreDump is supported & enabled by the FW.
CoreDump -> Fault:
A transition from CoreDump state to Fault state happens when the FW
completes the CoreDump collection.
CoreDump -> Reset:
A transition out of the CoreDump state happens when the host sets the Reset
Adapter bit in the System Diagnostic Register (Hard Reset). This reset
action indicates that CoreDump took longer than the host time out.
Firmware informs the driver about the maximum time that driver has to wait
for firmware to transition the IOC state from 'CoreDump' to 'FAULT' state
through 'CoreDumpTOSec' field of ManufacturingPage11 page. if this
'CoreDumpTOSec' field value is zero then driver will wait for max 15
seconds.
Driver informs the HBA firmware that it supports this new IOC state named
'CoreDump' state by enabling COREDUMP_ENABLE flag in ConfigurationFlags
field of ioc init request message.
Current patch handles the CoreDump state only during HBA initialization and
release scenarios where watchdog thread (which polls the IOC state in every
one second) is disabled. Next subsequent patch handle the CoreDump state
when watchdog thread is enabled.
During HBA initialization or release execution time if driver detects the
CoreDump state then driver will wait for maximum CoreDumpTOSec value
seconds for FW to copy the logs. After that it will issue the diag reset
operation to move the IOC state to Operational state.
Link: https://lore.kernel.org/r/20191226111333.26131-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:26 +0000 (06:13 -0500)]
scsi: mpt3sas: renamed _base_after_reset_handler function
Renamed _base_after_reset_handler function to
_base_clear_outstanding_commands so that it can be used in multiple
scenarios with suitable name which matches with the operation it does.
Also renamed its child functions. No functional changes.
Link: https://lore.kernel.org/r/20191226111333.26131-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:25 +0000 (06:13 -0500)]
scsi: mpt3sas: Add support for NVMe shutdown
Introduce function _scsih_nvme_shutdown() to issue IO Unit Control message
to IOC firmware with operation code 'shutdown'. This causes IOC firmware to
issue NVMe shutdown commands to all NVMe drives attached to it.
NVMe Shutdown:
NVMe devices need to have a specific shutdown sequence performed before
power is removed. For this, the IOC firmware needs to be notified when the
system is being shutdown. So during the system shutdown time, driver issues
an IO Unit Control request with operation code MPI26_CTRL_OP_SHUTDOWN to
inform firmware that a shutdown is initiated.
This shutdown command is issued only if NVMe devices are attached to the
controller.
During each NVMe device addition, driver reads pcie device page2 to get
shutdown latency (e.g. drive's RTD3 Entry Latency) and updates the max
latency value among the added NVMe drives in ioc->max_shutdown_latency.
This is used as the timeout value for IO Unit Control command at the time
of shutdown.
When a NVMe drive is removed and its shutdown latency matches which
ioc->max_shutdown_latency then ioc->max_shutdown_latency is updated to next
max value (by iterating over the list of available devices). If the
shutdown latency is 0, then default timeout is set to six seconds.
Link: https://lore.kernel.org/r/20191226111333.26131-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 26 Dec 2019 11:13:24 +0000 (06:13 -0500)]
scsi: mpt3sas: Update MPI Headers to v02.00.57
Update MPI Headers to version 02.00.57.
Link: https://lore.kernel.org/r/20191226111333.26131-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:30 +0000 (13:32 +0800)]
scsi: ufs-mediatek: configure and enable clk-gating
Enable clk-gating with customized delayed timer value in MediaTek Chipsets.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-7-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:29 +0000 (13:32 +0800)]
scsi: ufs-mediatek: configure customized auto-hibern8 timer
Configure customized auto-hibern8 timer in MediaTek Chipsets.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-6-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:28 +0000 (13:32 +0800)]
scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage
Export ufshcd_auto_hibern8_update to allow vendors to use common interface
to customize auto-hibernate timer.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-5-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:27 +0000 (13:32 +0800)]
scsi: ufs-mediatek: introduce reference clock control
Introduce reference clock control in MediaTek Chipset in order to disable
it if it is not necessary by UFS device to save system power.
Currently reference clock can be disabled during system suspend, runtime
suspend and clock-gating after link enters hibernate state.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-4-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:26 +0000 (13:32 +0800)]
scsi: ufs-mediatek: add device reset implementation
Add device reset vops implementation in MediaTek UFS driver.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 30 Dec 2019 05:32:25 +0000 (13:32 +0800)]
scsi: soc: mediatek: add header for SiP service interface
Add a common header for the SiP service interface in MediaTek Chipsets.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-2-git-send-email-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nishad Kamdar [Sat, 28 Dec 2019 05:56:46 +0000 (11:26 +0530)]
scsi: ufs: sysfs: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in header file
related to UFS Host Controller. It assigns explicit block comment to the
SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Link: https://lore.kernel.org/r/5ca6287665fe52d8f40062e0eab8561d2b7a5b40.1577511720.git.nishadkamdar@gmail.com
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nishad Kamdar [Sat, 28 Dec 2019 05:55:38 +0000 (11:25 +0530)]
scsi: mylex: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in header files
related to Mylex DAC960/
DAC1100 PCI RAID Controllers. It assigns explicit
block comment to the SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Link: https://lore.kernel.org/r/88332ad390f985bdebb9f2adaf2d499b0a639753.1577511720.git.nishadkamdar@gmail.com
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Dec 2019 22:02:48 +0000 (14:02 -0800)]
scsi: ufs: Remove the SCSI timeout handler
The UFS SCSI timeout handler was needed to compensate that
ufshcd_queuecommand() could return SCSI_MLQUEUE_HOST_BUSY for a long
time. Commit
a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating
tag conflicts") fixed this so the timeout handler is no longer necessary.
See also commit
f550c65b543b ("scsi: ufs: implement scsi host timeout handler").
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-7-bvanassche@acm.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Dec 2019 22:02:46 +0000 (14:02 -0800)]
scsi: ufs: Fix a race condition in the tracing code
Starting execution of a command before tracing a command may cause the
completion handler to free data while it is being traced. Fix this race by
tracing a command before it is submitted.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Dec 2019 22:02:45 +0000 (14:02 -0800)]
scsi: ufs: Make ufshcd_prepare_utp_scsi_cmd_upiu() easier to read
Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-4-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Dec 2019 22:02:44 +0000 (14:02 -0800)]
scsi: ufs: Make ufshcd_add_command_trace() easier to read
Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Dec 2019 22:02:43 +0000 (14:02 -0800)]
scsi: ufs: Fix indentation in ufshcd_query_attr_retry()
Remove a space that occurs after a tab.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-2-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Tue, 24 Dec 2019 13:01:06 +0000 (21:01 +0800)]
scsi: ufs: use ufshcd_vops_dbg_register_dump for vendor specific dumps
We already have ufshcd_vops_dbg_register_dump() thus all
"hba->vops->dbg_register_dump" references can be replaced by it.
Link: https://lore.kernel.org/r/1577192466-20762-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Tue, 24 Dec 2019 13:01:05 +0000 (21:01 +0800)]
scsi: ufs: unify scsi_block_requests usage
Currently UFS driver has ufshcd_scsi_block_requests() with reference
counter mechanism to avoid possible racing of blocking and unblocking
requests flow. Unify all users in UFS driver to use the same function.
Link: https://lore.kernel.org/r/1577192466-20762-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Fri, 20 Dec 2019 07:58:23 +0000 (16:58 +0900)]
scsi: sd_zbc: Rename sd_zbc_check_zones()
Now that the block layer implement zone checks on revalidate,
sd_zbc_check_zones() is reduced getting the zone size and verifying the
device capacity for device with RC_BASIS=0. Be clear about this by renaming
sd_zbc_check_zones() to sd_zbc_check_capacity() and updating the function
description and comments.
Link: https://lore.kernel.org/r/20191220075823.400072-3-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Fri, 20 Dec 2019 07:58:22 +0000 (16:58 +0900)]
scsi: sd_zbc: Simplify sd_zbc_check_zones()
Now that the block layer generic zone revalidation code in
blk_revalidate_disk_zones() checks for power of 2 zone size, there is no
need to do it in sd_zbc_check_zones(). Remove this check.
Link: https://lore.kernel.org/r/20191220075823.400072-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 19 Dec 2019 00:50:50 +0000 (16:50 -0800)]
scsi: qla2xxx: Use get_unaligned_*() instead of open-coding these functions
This patch improves readability and does not change any functionality.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219005050.40193-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 19 Dec 2019 00:49:05 +0000 (16:49 -0800)]
scsi: qla2xxx: Fix the endianness of the qla82xx_get_fw_size() return type
Since qla82xx_get_fw_size() returns a number in CPU-endian format, change
its return type from __le32 into u32. This patch does not change any
functionality.
Fixes:
9c2b297572bf ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.")
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 19 Dec 2019 00:47:06 +0000 (16:47 -0800)]
scsi: qla2xxx: Improve readability of the code that handles qla_flt_header
Declare qla_hw_data.flt as a qla_flt_header pointer instead of as a void
pointer. Add a zero-length array at the end of struct qla_flt_header to
make it clear that qla_flt_header and qla_flt_region are contiguous. This
patch removes several casts but does not change any functionality.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219004706.39039-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Thu, 19 Dec 2019 12:35:57 +0000 (20:35 +0800)]
scsi: libsas: Tidy SAS address print format
Currently we use a mixture of %016llx, %llx, and %16llx when printing a SAS
address.
Since the most significant nibble of the SAS address is always 5 - as per
standard - this formatting is not so important; but some fake SAS addresses
for SATA devices may not be. And we have mangled/invalid address to
consider also. And it's better to be consistent in the code, so use a fixed
format.
The SAS address is a fixed size at 64b, so we want to 0 byte extend to 16
nibbles, so use %016llx globally.
Also make some prints to be explicitly hex, and tidy some whitespace issue.
Link: https://lore.kernel.org/r/1576758957-227350-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:08 +0000 (15:58 -0800)]
scsi: lpfc: Update lpfc version to 12.6.0.3
Update lpfc version to 12.6.0.3
Link: https://lore.kernel.org/r/20191218235808.31922-11-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:07 +0000 (15:58 -0800)]
scsi: lpfc: Fix improper flag check for IO type
Current driver code looks at iocb types and uses a "==" comparison on the
flags to determine type. If another flag were set, it would disrupt the
comparison.
Fix by converting to a bitwise & operation.
Link: https://lore.kernel.org/r/20191218235808.31922-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:06 +0000 (15:58 -0800)]
scsi: lpfc: Fix MDS Latency Diagnostics Err-drop rates
When running Cisco-MDS diagnostics which perform driver-level frame loop
back, the switch is reporting errors. Diagnostic has a limit on latency
that is not being met by the driver.
The requirement of Latency frames is that they should be responded back by
the host with a maximum delay of few hundreds of microseconds. If the
switch doesn't get response frames within this time frame, it fails the
test.
Test is failing as the lpfc-wq workqueue was overwhelmed by the packet rate
and in some cases, the work element yielded to other kernel elements.
To resolve, reduce the outstanding load allowed by the adapter. This
ensures the driver spends a reasonable amount of time doing loopback and
can do so such that latency values can be met. Load is managed by reducing
the number of receive buffers posted such that the link can be
backpressured to reduce load.
Link: https://lore.kernel.org/r/20191218235808.31922-9-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:05 +0000 (15:58 -0800)]
scsi: lpfc: Fix unmap of dpp bars affecting next driver load
When unattaching, the driver did not unmap the DPP bar. This caused the
next load of the driver, which attempts to enable wc, to not work correctly
and wc to be disabled due to an address mapping overlap.
Fix by unmapping on unattach.
Link: https://lore.kernel.org/r/20191218235808.31922-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:04 +0000 (15:58 -0800)]
scsi: lpfc: Fix disablement of FC-AL on lpe35000 models
The order of the flags/checks for adapters where FC-AL is supported
erroneously excluded lpe35000 adapter models. Also noted that the G7 flags
for Loop and Persistent topology are incorrect. They should follow the
rules as G6.
Rework the logic to enable LPe35000 FC-AL support. Collapse G7 support
logic to the same rules as G6.
Link: https://lore.kernel.org/r/20191218235808.31922-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:03 +0000 (15:58 -0800)]
scsi: lpfc: Fix ras_log via debugfs
/sys/kernel/debug/lpfc/fn0/ras_log always shows the same ras_log even if
there are link bounce events triggered via issue_lip
Dynamic FW logging had logic that prematurely breaks from the buffer
filling loop.
Fix the check for buffer overrun by looking before copying and restricting
copy length to the remaining buffer. When copying, ensure space for NULL
character is left in the buffer. While in the routine - ensure the buffer
is cleared before adding elements.
Link: https://lore.kernel.org/r/20191218235808.31922-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:02 +0000 (15:58 -0800)]
scsi: lpfc: Fix Fabric hostname registration if system hostname changes
There are reports of multiple ports on the same system displaying different
hostnames in fabric FDMI displays.
Currently, the driver registers the hostname at initialization and obtains
the hostname via init_utsname()->nodename queried at the time the FC link
comes up. Unfortunately, if the machine hostname is updated after
initialization, such as via DHCP or admin command, the value registered
initially will be incorrect.
Fix by having the driver save the hostname that was registered with FDMI.
The driver then runs a heartbeat action that will check the hostname. If
the name changes, reregister the FMDI data.
The hostname is used in RSNN_NN, FDMI RPA and FDMI RHBA.
Link: https://lore.kernel.org/r/20191218235808.31922-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:01 +0000 (15:58 -0800)]
scsi: lpfc: Fix missing check for CSF in Write Object Mbox Rsp
When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware. To enable
the new features, a chip reset/pci slot reset would be required.
Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.
Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:58:00 +0000 (15:58 -0800)]
scsi: lpfc: Fix: Rework setting of fdmi symbolic node name registration
This patch reworks the fdmi symbolic node name data for the following two
issues:
- Correcting extraneous periods following the DV and HN fdmi data fields.
- Avoiding buffer overflow issues when formatting the data.
The fix to the fist issue is to just remove the characters.
The fix to the second issue has all data being staged in temporary storage
before being moved to the real buffer.
Link: https://lore.kernel.org/r/20191218235808.31922-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Wed, 18 Dec 2019 23:57:59 +0000 (15:57 -0800)]
scsi: lpfc: Fix incomplete NVME discovery when target
NVMe device re-discovery does not complete. Dev_loss_tmo messages seen on
initiator after recovery from a link disturbance.
The failing case is the following:
When the driver (as a NVME target) receives a PLOGI, the driver initiates
an "unreg rpi" mailbox command. While the mailbox command is in progress,
the driver requests that an ACC be sent to the initiator. The target's ACC
is received by the initiator and the initiator then transmits a PLOGI. The
driver receives the PLOGI prior to receiving the completion for the PLOGI
response WQE that sent the ACC. (Different delivery sources from the hw so
the race is very possible). Given the PLOGI is prior to the ACC completion
(signifying PLOGI exchange complete), the driver LS_RJT's the PRLI. The
"unreg rpi" mailbox then completes. Since PRLI has been received, the
driver transmits a PLOGI to restart discovery, which the initiator then
ACC's. If the driver processes the (re)PLOGI ACC prior to the completing
the handling for the earlier ACC it sent the intiators original PLOGI,
there is no state change for completion of the (re)PLOGI. The ndlp remains
in "PLOGI Sent" and the initiator continues sending PRLI's which are
rejected by the target until timeout or retry is reached.
Fix by: When in target mode, defer sending an ACC for the received PLOGI
until unreg RPI completes.
Link: https://lore.kernel.org/r/20191218235808.31922-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Tue, 17 Dec 2019 22:06:17 +0000 (14:06 -0800)]
scsi: qla2xxx: Update driver version to 10.01.00.22-k
Link: https://lore.kernel.org/r/20191217220617.28084-15-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:16 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix mtcp dump collection failure
MTCP dump failed due to MB Reg 10 was picking garbage data from stack
memory.
Fixes:
81178772b636a ("[SCSI] qla2xxx: Implemetation of mctp.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:15 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix stuck session in GNL
Fix race condition between GNL completion processing and GNL request. Late
submission of GNL request was not seen by the GNL completion thread. This
patch will re-submit the GNL request for late submission fcport.
Link: https://lore.kernel.org/r/20191217220617.28084-13-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:14 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix RIDA Format-2
This patch fixes offset for Format-2 data structure for Report ID
Acquisition. This caused driver to set remote_nport_id to 0x0000 in N2N
configuration. In a scenario where initiator's WWPN is higher than target's
WWPN, driver will assign 0x00 as target nport-id, which results into login
failure.
Link: https://lore.kernel.org/r/20191217220617.28084-12-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:13 +0000 (14:06 -0800)]
scsi: qla2xxx: Consolidate fabric scan
Consolidate scan for fabric loop and fabric topologies into a single scan.
Link: https://lore.kernel.org/r/20191217220617.28084-11-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shyam Sundar [Tue, 17 Dec 2019 22:06:12 +0000 (14:06 -0800)]
scsi: qla2xxx: Correct fcport flags handling
This patch fixes some instances of FCF_ASYNC_{SENT|ACTIVE} flag setting and
clearning were missing.
Link: https://lore.kernel.org/r/20191217220617.28084-10-hmadhani@marvell.com
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:11 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix stuck login session using prli_pend_timer
Session is stuck if driver sees FW has received a PRLI. Driver allows FW to
finish with processing of PRLI by checking back with FW at a later time to
see if the PRLI has finished. Instead, driver failed to push forward after
re-checking PRLI completion.
Fixes:
ce0ba496dccf ("scsi: qla2xxx: Fix stuck login session")
Cc: stable@vger.kernel.org # 5.3
Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:10 +0000 (14:06 -0800)]
scsi: qla2xxx: Use common routine to free fcport struct
This patch does not change any any functionality.
Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Joe Carnuccio [Tue, 17 Dec 2019 22:06:09 +0000 (14:06 -0800)]
scsi: qla2xxx: Add D-Port Diagnostic reason explanation logs
This patch adds more details when D-Port diag async event is generated by
the firmware.
Link: https://lore.kernel.org/r/20191217220617.28084-7-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Tue, 17 Dec 2019 22:06:08 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix update_fcport for current_topology
logout_on_delete flag should not be set if the topology is Loop. This patch
fixes unintentional logout during loop topology.
Link: https://lore.kernel.org/r/20191217220617.28084-6-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shyam Sundar [Tue, 17 Dec 2019 22:06:07 +0000 (14:06 -0800)]
scsi: qla2xxx: Cleanup unused async_logout_done
This patch removes unused qla2x00_async_logout_done from the code.
Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.com
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shyam Sundar [Tue, 17 Dec 2019 22:06:06 +0000 (14:06 -0800)]
scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcport
This patch adds a shadow variable to hold disc_state history for the fcport
and prints state transition when the logging is enabled.
Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 17 Dec 2019 22:06:05 +0000 (14:06 -0800)]
scsi: qla2xxx: Fix fabric scan hang
On timeout, SRB pointer was cleared from outstanding command array and
dropped. It was not allowed to go through the done process and cleanup.
This patch will abort the SRB where FW will return it with an error status
and resume the normal cleanup.
Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Tue, 17 Dec 2019 22:06:04 +0000 (14:06 -0800)]
scsi: qla2xxx: Remove defer flag to indicate immeadiate port loss
During cable pull test case, if the port is disconnected for time larger
than devloss timeout, driver does not mark path offline. In such case,
instead of notifying SCSI-ML of loop down, driver goes into endless loop of
device relogin because defer flag is set.
With newer handling of device relogin in driver discovery, defer flag is
now redundant. This patch removes defer flag and cleans up code handling
port lost indication to SCSI-ML.
Link: https://lore.kernel.org/r/20191217220617.28084-2-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qtran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Hellstrom [Tue, 3 Dec 2019 19:30:52 +0000 (20:30 +0100)]
scsi: vmw_pvscsi: Silence dma mapping errors
These errors typically occur with swiotlb when the swiotlb buffer is full.
But they are transient and would typically unnecessarily worry a user.
Instead of errors, print debug messages.
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20191203193052.7583-2-thomas_os@shipmail.org
Acked-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Hellstrom [Tue, 3 Dec 2019 19:30:51 +0000 (20:30 +0100)]
scsi: vmw_pvscsi: Fix swiotlb operation
With swiotlb, the first byte of the sense buffer may in some cases be
uninitialized since we use DMA_FROM_DEVICE, and the device incorrectly
doesn't clear it. In those cases, clear it after DMA unmapping.
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20191203193052.7583-1-thomas_os@shipmail.org
Suggested-by: Vishal Bhakta <vbhakta@vmware.com>
Acked-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nathan Chancellor [Wed, 18 Dec 2019 01:47:26 +0000 (18:47 -0700)]
scsi: csiostor: Adjust indentation in csio_device_reset
Clang warns:
../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
csio_lnodes_exit(hw, 1);
^
../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is
here
if (*buf != '1')
^
1 warning generated.
This warning occurs because there is a space after the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes:
a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/818
Link: https://lore.kernel.org/r/20191218014726.8455-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nathan Chancellor [Wed, 18 Dec 2019 01:42:20 +0000 (18:42 -0700)]
scsi: aic7xxx: Adjust indentation in ahc_find_syncrate
Clang warns:
../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
^
../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement
is here
if (syncrate == &ahc_syncrates[maxsync])
^
1 warning generated.
This warning occurs because there is a space amongst the tabs on this
line. Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
This has been a problem since the beginning of git history hence no fixes
tag.
Link: https://github.com/ClangBuiltLinux/linux/issues/817
Link: https://lore.kernel.org/r/20191218014220.52746-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nathan Chancellor [Wed, 18 Dec 2019 01:52:52 +0000 (18:52 -0700)]
scsi: qla4xxx: Adjust indentation in qla4xxx_mem_free
Clang warns:
../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (ha->fw_dump)
^
../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is
here
if (ha->queues)
^
1 warning generated.
This warning occurs because there is a space after the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes:
068237c87c64 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure")
Link: https://github.com/ClangBuiltLinux/linux/issues/819
Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Aditya Pakki [Tue, 17 Dec 2019 21:22:13 +0000 (15:22 -0600)]
scsi: libfc: remove unnecessary assertion on ep variable
In ft_recv_write_data(), the pointer ep is dereferenced first and then
asserts for NULL. The patch removes the unnecessary assertion.
Link: https://lore.kernel.org/r/20191217212214.30722-1-pakki001@umn.edu
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chen Zhou [Tue, 17 Dec 2019 13:43:09 +0000 (21:43 +0800)]
scsi: initio: make initio_state_7() static
Fix sparse warning:
drivers/scsi/initio.c:1643:5: warning: symbol 'initio_state_7' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20191217134309.41649-1-chenzhou10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chen Zhou [Fri, 13 Dec 2019 06:40:42 +0000 (14:40 +0800)]
scsi: ibmvscsi_tgt: remove set but not used variables 'iue' and 'sd'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_send_messages:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1888:19: warning: variable iue set but not used [-Wunused-but-set-variable]
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_queue_data_in:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3806:8: warning: variable sd set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20191213064042.161840-1-chenzhou10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chen Zhou [Thu, 12 Dec 2019 02:35:56 +0000 (10:35 +0800)]
scsi: sym53c8xx: fix typos in comments
Fix the typo "GPOI" -> "GPIO" in comment.
Link: https://lore.kernel.org/r/20191212023556.72618-1-chenzhou10@huawei.com
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 9 Dec 2019 17:42:05 +0000 (09:42 -0800)]
scsi: core: Fix a compiler warning triggered by the SCSI logging code
This patch fixes the following compiler warning:
In file included from drivers/scsi/scsi_error.c:46:
drivers/scsi/scsi_error.c: In function 'scsi_eh_target_reset':
drivers/scsi/scsi_logging.h:65:81: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
65 | LOGGING(SCSI_LOG_ERROR_SHIFT, SCSI_LOG_ERROR_BITS, LEVEL,CMD);
| ^
drivers/scsi/scsi_error.c:1562:4: note: in expansion of macro 'SCSI_LOG_ERROR_RECOVERY'
1562 | SCSI_LOG_ERROR_RECOVERY(3,
| ^~~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20191209174205.190025-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sheeba B [Mon, 16 Dec 2019 10:17:12 +0000 (11:17 +0100)]
scsi: ufs: Power off hook for Cadence UFS driver
Attach power off hook to Cadence UFS driver.
Link: https://lore.kernel.org/r/1576491432-631-1-git-send-email-sheebab@cadence.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sheeba B <sheebab@cadence.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Sat, 7 Dec 2019 12:22:01 +0000 (20:22 +0800)]
scsi: ufs: disable interrupt during clock-gating
Similar to suspend, ufshcd interrupt can be disabled since there won't be
any host controller transaction expected till clocks ungated.
Link: https://lore.kernel.org/r/1575721321-8071-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Sat, 7 Dec 2019 12:22:00 +0000 (20:22 +0800)]
scsi: ufs: disable irq before disabling clocks
During suspend flow, interrupt shall be disabled before disabling clocks to
avoid potential system hang due to accessing host registers after host
clocks are disabled.
For example, if an interrupt comes with IRQF_IRQPOLL flag configured with
the misrouted interrupt recovery feature enabled, ufshcd ISR may be
triggered even if nothing shall be done for UFS. In this case, system hang
may happen if UFS interrupt status register is accessed with host clocks
disabled.
Link: https://lore.kernel.org/r/1575721321-8071-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Fri, 13 Dec 2019 10:49:35 +0000 (13:49 +0300)]
scsi: ufs: Simplify a condition
We know that "check_for_bkops" is non-zero on this side of the || because
it was checked on the other side.
Link: https://lore.kernel.org/r/20191213104935.wgpq2epaz6zh5zus@kili.mountain
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Fri, 13 Dec 2019 10:48:28 +0000 (13:48 +0300)]
scsi: ufs: Unlock on a couple error paths
We introduced a few new error paths, but we can't return directly, we first
have to unlock "hba->clk_scaling_lock" first.
Fixes:
a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountain
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sheeba B [Fri, 6 Dec 2019 04:25:03 +0000 (05:25 +0100)]
scsi: ufs: Update L4 attributes on manual hibern8 exit in Cadence UFS.
Backup L4 attributes duirng manual hibern8 entry and restore the L4
attributes on manual hibern8 exit as per JESD220C.
Link: https://lore.kernel.org/r/1575606303-10917-1-git-send-email-sheebab@cadence.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sheeba B <sheebab@cadence.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bean Huo [Thu, 5 Dec 2019 22:09:12 +0000 (23:09 +0100)]
scsi: ufs: delete unused structure filed tr
Delete unused structure field tr in structure utp_upiu_req, since no person
uses it for task management.
Fixes:
df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Link: https://lore.kernel.org/r/20191205220912.5696-1-huobean@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Thu, 5 Dec 2019 02:14:46 +0000 (02:14 +0000)]
scsi: ufs: Do not free irq in suspend
Since ufshcd irq resource is allocated with the device resource management
aware IRQ request implementation, we don't really need to free up irq
during suspend, disabling it during suspend and reenabling it during resume
should be good enough.
Link: https://lore.kernel.org/r/0101016ed3d69793-22918f99-23bf-495d-8a36-a9c108d1cbce-000000@us-west-2.amazonses.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Thu, 5 Dec 2019 02:14:42 +0000 (02:14 +0000)]
scsi: ufs: Do not clear the DL layer timers
During power mode change, PACP_PWR_Req frame sends PAPowerModeUserData
parameters (and they are considered valid by device if Flags[4] -
UserDataValid bit is set in the same frame). Currently we don't set these
PAPowerModeUserData parameters and hardware always sets UserDataValid bit
which would clear all the DL layer timeout values of the peer device after
the power mode change.
This change sets the PAPowerModeUserData[0..5] to UniPro specification
recommended default values, in addition we are also setting the relevant
DME_LOCAL_* timer attributes as required by UFS HCI specification.
Link: https://lore.kernel.org/r/0101016ed3d688a4-cfaeb1c9-238b-46c4-9c89-d48c410ba325-000000@us-west-2.amazonses.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Thu, 5 Dec 2019 02:14:33 +0000 (02:14 +0000)]
scsi: ufs: Release clock if DMA map fails
In queuecommand path, if DMA map fails, it bails out with clock held. In
this case, release the clock to keep its usage paired.
[mkp: applied by hand]
Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Thu, 5 Dec 2019 02:14:30 +0000 (02:14 +0000)]
scsi: ufs: Use DBD setting in mode sense
UFS standard requires DBD field to be set to 1 in MODE SENSE(10).
Some card vendors are more strict and check the DBD field, hence respond
with CHECK_CONDITION (Sense key set to ILLEGAL_REQUEST and ASC set to
INVALID FIELD IN CDB). When host sends MODE SENSE for page caching, as a
result of the CHECK_CONDITION response, host assumes that the device
doesn't support the cache feature and doesn't send SYNCHRONIZE_CACHE
commands to flush the device cache. This can result in data corruption in
case of sudden power down when there is data stored in the device cache.
This patch fixes the DBD field setting as required in UFS standard.
Link: https://lore.kernel.org/r/0101016ed3d657e4-32a6dd52-1505-4312-97ff-2bd3bee59eb7-000000@us-west-2.amazonses.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Thu, 5 Dec 2019 02:14:25 +0000 (02:14 +0000)]
scsi: core: Adjust DBD setting in MODE SENSE for caching mode page per LLD
UFS JEDEC standards require DBD field to be set to 1 in mode sense
command. This patch allows LLD to define the setting of DBD, if
required.
Link: https://lore.kernel.org/r/0101016ed3d643f9-ffd45d6c-c593-4a13-a18f-a32da3d3bb97-000000@us-west-2.amazonses.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 26 Nov 2019 06:53:33 +0000 (22:53 -0800)]
scsi: ufs: Complete pending requests in host reset and restore path
In UFS host reset and restore path, before probe, we stop and start the
host controller once. After host controller is stopped, the pending
requests, if any, are cleared from the doorbell, but no completion IRQ
would be raised due to the hba is stopped. These pending requests shall be
completed along with the first NOP_OUT command (as it is the first command
which can raise a transfer completion IRQ) sent during probe. Since the
OCSs of these pending requests are not SUCCESS (because they are not yet
literally finished), their UPIUs shall be dumped. When there are multiple
pending requests, the UPIU dump can be overwhelming and may lead to
stability issues because it is in atomic context. Therefore, before probe,
complete these pending requests right after host controller is stopped and
silence the UPIU dump from them.
Link: https://lore.kernel.org/r/1574751214-8321-5-git-send-email-cang@qti.qualcomm.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 26 Nov 2019 06:53:32 +0000 (22:53 -0800)]
scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
To be on the safe side, do not touch lrb after clearing its slot in the
lrb_in_use bitmap to avoid messing up the next task which would possibly
occupy this lrb.
[mkp: applied by hand]
Link: https://lore.kernel.org/r/1574751214-8321-4-git-send-email-cang@qti.qualcomm.com
Reviewed by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 26 Nov 2019 06:53:31 +0000 (22:53 -0800)]
scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
Per UFS 3.0 JEDEC standard, the VCCQ2 min voltage is 1.7v and the VCCQ
voltage range is 1.14v ~ 1.26v. Update their hard codes accordingly to make
sure they work in a safe range compliant for ver 1.0/1.1/2.0/2.1/3.0 UFS
devices.
Link: https://lore.kernel.org/r/1574751214-8321-3-git-send-email-cang@qti.qualcomm.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Asutosh Das [Tue, 26 Nov 2019 06:53:30 +0000 (22:53 -0800)]
scsi: ufs: Recheck bkops level if bkops is disabled
bkops level should be rechecked upon receiving an exception. Currently the
level is being cached and never updated.
Update bkops each time the level is checked. Also do not use the cached
bkops level value if it is disabled and then enabled.
Fixes:
afdfff59a0e0 (scsi: ufs: handle non spec compliant bkops behaviour by device)
Link: https://lore.kernel.org/r/1574751214-8321-2-git-send-email-cang@qti.qualcomm.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 9 Dec 2019 18:13:09 +0000 (10:13 -0800)]
scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs
Manage TMF tags with blk_{get,put}_request() instead of
ufshcd_get_tm_free_slot() / ufshcd_put_tm_slot(). Store a per-request
completion pointer in request.end_io_data instead of using a waitqueue to
report TMF completion.
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191209181309.196233-3-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 9 Dec 2019 18:13:08 +0000 (10:13 -0800)]
scsi: ufs: Avoid busy-waiting by eliminating tag conflicts
Instead of tracking which tags are in use in the ufs_hba.lrb_in_use
bitmask, rely on the block layer tag allocation mechanism. This patch
removes the following busy-waiting loop if ufshcd_issue_devman_upiu_cmd()
and the block layer accidentally allocate the same tag for a SCSI request:
* ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY.
* The SCSI core requeues the SCSI command.
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191209181309.196233-2-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kars de Jong [Tue, 19 Nov 2019 20:20:21 +0000 (21:20 +0100)]
scsi: esp_scsi: Add support for FSC chip
The FSC (NCR53CF9x-2 / SYM53CF9x-2) has a different family code than QLogic
or Emulex parts. This caused it to be detected as a FAS100A.
Unforunately, this meant the configuration of the CONFIG3 register was
incorrect. This causes data transfer issues with FAST-SCSI targets.
The FSC also has the CONFIG4 register. It can be used to enable a feature
called Active Negation which should always be enabled according to the data
manual.
Link: https://lore.kernel.org/r/20191119202021.28720-3-jongk@linux-m68k.org
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kars de Jong [Tue, 19 Nov 2019 20:20:20 +0000 (21:20 +0100)]
scsi: esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
The order of the definitions in the esp_rev enum is important. The values
are used in comparisons for chip features.
Add a comment to the enum explaining this.
Also, the actual values for the enum fields are irrelevant, so remove the
explicit values (suggested by Geert Uytterhoeven). This makes adding a new
field in the middle of the enum easier.
Finally, move the PCSCSI definition to the right place in the enum. In its
previous location, at the end of the enum, the wrong values are written to
the CONFIG3 register when used with FAST-SCSI targets.
Link: https://lore.kernel.org/r/20191119202021.28720-2-jongk@linux-m68k.org
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Sun, 15 Dec 2019 23:16:08 +0000 (15:16 -0800)]
Linux 5.5-rc2
Linus Torvalds [Sun, 15 Dec 2019 22:58:13 +0000 (14:58 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"A small collection of -rc fixes. Mostly. One API addition, but that's
because we wanted to use it in a fix. There's also a bug fix that is
going to render the 5.5 kernel's soft-RoCE driver incompatible with
all soft-RoCE versions prior, but it's required to actually implement
the protocol according to the RoCE spec and required in order for the
soft-RoCE driver to be able to successfully work with actual RoCE
hardware.
Summary:
- Update Steve Wise info
- Fix for soft-RoCE crc calculations (will break back compatibility,
but only with the soft-RoCE driver, which has had this bug since it
was introduced and it is an on-the-wire bug, but will make
soft-RoCE fully compatible with real RoCE hardware)
- cma init fixup
- counters oops fix
- fix for mlx4 init/teardown sequence
- fix for mkx5 steering rules
- introduce a cleanup API, which isn't a fix, but we want to use it
in the next fix
- fix for mlx5 memory management that uses API in previous patch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix device memory flows
IB/core: Introduce rdma_user_mmap_entry_insert_range() API
IB/mlx5: Fix steering rule of drop and count
IB/mlx4: Follow mirror sequence of device add during device removal
RDMA/counter: Prevent auto-binding a QP which are not tracked with res
rxe: correctly calculate iCRC for unaligned payloads
Update mailmap info for Steve Wise
RDMA/cma: add missed unregister_pernet_subsys in init failure
Linus Torvalds [Sun, 15 Dec 2019 20:27:31 +0000 (12:27 -0800)]
Merge tag 'riscv/for-v5.5-rc2' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two minor build fixes:
- Fix builds of the ELF loader when built with 'make -j1' (nommu
only)
- Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
during randconfig testing)"
* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: only select serial sifive if TTY is enabled
riscv: Fix build dependency for loader
Linus Torvalds [Sun, 15 Dec 2019 20:24:44 +0000 (12:24 -0800)]
Merge tag 'for-linus-5.5b-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes: one for a resource accounting bug in some configurations
and a fix for another patch which went into rc1"
* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix ballooned page accounting without hotplug enabled
xen-blkback: prevent premature module unload
Linus Torvalds [Sun, 15 Dec 2019 19:36:12 +0000 (11:36 -0800)]
Merge branch 'remove-ksys-mount-dup' of git://git./linux/kernel/git/brodo/linux
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
"This small series replaces all in-kernel calls to the
userspace-focused ksys_mount() and ksys_dup() with calls to
kernel-centric functions:
For each replacement of ksys_mount() with do_mount(), one needs to
verify that the first and third parameter (char *dev_name, char *type)
are strings allocated in kernelspace and that the fifth parameter
(void *data) is either NULL or refers to a full page (only occurence
in init/do_mounts.c::do_mount_root()). The second and fourth
parameters (char *dir_name, unsigned long flags) are passed by
ksys_mount() to do_mount() unchanged, and therefore do not require
particular care.
Moreover, instead of pretending to be userspace, the opening of
/dev/console as stdin/stdout/stderr can be implemented using in-kernel
functions as well. Thereby, ksys_dup() can be removed for good"
[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
case, but it at least removes _some_ of the users of "treat kernel
pointers as user pointers for our magical init sequence".
One day we'll hopefully be rid of it all, and can initialize our
init_thread addr_limit to USER_DS. - Linus ]
* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
fs: remove ksys_dup()
init: unify opening /dev/console as stdin/stdout/stderr
init: use do_mount() instead of ksys_mount()
initrd: use do_mount() instead of ksys_mount()
devtmpfs: use do_mount() instead of ksys_mount()
Linus Torvalds [Sun, 15 Dec 2019 00:10:22 +0000 (16:10 -0800)]
Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git./linux/kernel/git/gustavoars/linux
Pull fall through fix from Gustavo Silva:
"Fix compile error on sh by marking expected switch fall-through"
* tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
sh: kgdb: Mark expected switch fall-throughs
Linus Torvalds [Sat, 14 Dec 2019 20:51:57 +0000 (12:51 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
scsi: iscsi: Fix a potential deadlock in the timeout handler
scsi: smartpqi: Update attribute name to `driver_version`
scsi: libsas: stop discovering if oob mode is disconnected
scsi: ufs: Disable autohibern8 feature in Cadence UFS
scsi: iscsi: qla4xxx: fix double free in probe
scsi: ufs: Give an unique ID to each ufs-bsg
scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
scsi: qla2xxx: Don't defer relogin unconditonally
scsi: qla2xxx: Send Notify ACK after N2N PLOGI
scsi: qla2xxx: Configure local loop for N2N target
scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
scsi: qla2xxx: Don't call qlt_async_event twice
scsi: qla2xxx: Allow PLOGI in target mode
scsi: qla2xxx: Change discovery state before PLOGI
scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
scsi: qla2xxx: Initialize free_work before flushing it
scsi: qla2xxx: Use explicit LOGO in target mode
scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
...
Linus Torvalds [Sat, 14 Dec 2019 20:49:20 +0000 (12:49 -0800)]
Merge tag 'char-misc-5.5-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are six small fixes for some reported char/misc driver issues:
- fix build warnings with new 'awk' with the raid6 code
- four interconnect driver bugfixes
- binder fix for reported problem
All of these except the binder fix have been in linux-next with no
reported issues. The binder fix is "new" but Todd says it is good as
he has tested it :)"
* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix incorrect calculation for num_valid
interconnect: qcom: msm8974: Walk the list safely on node removal
interconnect: qcom: qcs404: Walk the list safely on node removal
interconnect: qcom: sdm845: Walk the list safely on node removal
interconnect: qcom: Fix Kconfig indentation
lib: raid6: fix awk build warnings
Linus Torvalds [Sat, 14 Dec 2019 20:45:36 +0000 (12:45 -0800)]
Merge tag 'driver-core-5.5-rc2' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported issues
The first is to handle the much-reported (by the build systems)
problem that superH does not boot anymore.
The second handles an issue in the new platform logic that a number of
people ran into with the automated tests in kbuild
Both of these have been in linux-next with no reported issues"
* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: Fix boot problem on SuperH
of/platform: Unconditionally pause/resume sync state during kernel init
Linus Torvalds [Sat, 14 Dec 2019 20:43:57 +0000 (12:43 -0800)]
Merge tag 'staging-5.5-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for reported
issues for 5.5-rc2
Nothing major, a bunch of tiny IIO driver issues resolved, and some
staging driver fixes for things that people ran into with 5.5-rc1.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
fbtft: Fix the initialization from property algorithm
staging: rtl8712: fix interface sanity check
staging: rtl8188eu: fix interface sanity check
staging: gigaset: add endpoint-type sanity check
staging: gigaset: fix illegal free on probe errors
staging: gigaset: fix general protection fault on probe
staging: vchiq: call unregister_chrdev_region() when driver registration fails
staging: exfat: fix multiple definition error of `rename_file'
staging/wlan-ng: add CRC32 dependency in Kconfig
staging: hp100: Fix build error without ETHERNET
staging: fbtft: Do not hardcode SPI CS polarity inversion
staging: exfat: properly support discard in clr_alloc_bitmap()
staging/octeon: Mark Ethernet driver as BROKEN
iio: adc: max9611: Fix too short conversion time delay
iio: ad7949: fix channels mixups
iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
iio: imu: st_lsm6dsx: fix decimation factor estimation
iio: imu: inv_mpu6050: fix temperature reporting using bad unit
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
...
Linus Torvalds [Sat, 14 Dec 2019 20:40:39 +0000 (12:40 -0800)]
Merge tag 'usb-5.5-rc2' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported issues for 5.5-rc2
There's the usual gadget and xhci fixes, as well as some other
problems that syzbot has been finding during it's fuzzing runs. Full
details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
xhci: make sure interrupts are restored to correct state
xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
xhci: Increase STS_HALT timeout in xhci_suspend()
usb: xhci: only set D3hot for pci device
xhci: fix USB3 device initiated resume race with roothub autosuspend
xhci: Fix memory leak in xhci_add_in_port()
USB: Fix incorrect DMA allocations for local memory pool drivers
usb: gadget: fix wrong endpoint desc
usb: dwc3: ep0: Clear started flag on completion
usb: dwc3: gadget: Clear started flag for non-IOC
usb: dwc3: gadget: Fix logical condition
USB: atm: ueagle-atm: add missing endpoint check
USB: adutux: fix interface sanity check
USB: idmouse: fix interface sanity checks
USB: serial: io_edgeport: fix epic endpoint lookup
usb: mon: Fix a deadlock in usbmon between mmap and read
usb: common: usb-conn-gpio: Don't log an error on probe deferral
usb: core: urb: fix URB structure initialization function
usb: typec: fix use after free in typec_register_port()
...
Linus Torvalds [Sat, 14 Dec 2019 20:34:37 +0000 (12:34 -0800)]
Merge tag 's390-5.5-3' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for KASAN_VMALLOC feature.
- Remove the last user of problematic diag 0x44 call.
- Adjust sampling interval and avoid sample data block overflow
condition on pressure in perf code.
- Prefer EOPNOTSUPP over ENOTSUPP and comments fixes.
* tag 's390-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kasan: add KASAN_VMALLOC support
s390: remove last diag 0x44 caller
s390/uv: use EOPNOTSUPP instead of ENOTSUPP
s390/cpum_sf: Avoid SBD overflow condition in irq handler
s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
s390/test_unwind: fix spelling mistake "reqister" -> "register"
s390/spinlock: remove confusing comment in arch_spin_lock_wait
Linus Torvalds [Sat, 14 Dec 2019 20:32:28 +0000 (12:32 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix another build problem for Wireguard without Crypto"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm/curve25519 - add arch-specific key generation function
Linus Torvalds [Sat, 14 Dec 2019 19:44:14 +0000 (11:44 -0800)]
Merge tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fixes from Steve French:
"Three small smb3 fixes: this addresses two recent issues reported in
additional testing during rc1, a refcount underflow and a problem with
an intermittent crash in SMB2_open_init"
* tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Close cached root handle only if it has a lease
SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding path
smb3: fix refcount underflow warning on unmount when no directory leases
Linus Torvalds [Sat, 14 Dec 2019 19:13:54 +0000 (11:13 -0800)]
Merge tag 'ovl-fixes-5.5-rc2' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix some bugs and documentation"
* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
docs: filesystems: overlayfs: Fix restview warnings
docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: don't use a temp buf for encoding real fh
ovl: make sure that real fid is 32bit aligned in memory
ovl: fix lookup failure on multi lower squashfs