Linus Torvalds [Fri, 7 Feb 2020 20:46:08 +0000 (12:46 -0800)]
Merge tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just some fixes for this merge window: the tegra changes fix some
regressions in the merge, nouveau has a few modesetting fixes.
The amdgpu fixes are bit bigger, but they contain a couple of weeks of
fixes, and don't seem to contain anything that isn't really a fix.
Summary:
tegra:
- merge window regression fixes
nouveau:
- couple of volta/turing modesetting fixes
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes"
* tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm: (90 commits)
gpu: host1x: Set DMA direction only for DMA-mapped buffer objects
drm/tegra: Reuse IOVA mapping where possible
drm/tegra: Relax IOMMU usage criteria on old Tegra
drm/amd/dm/mst: Ignore payload update failures
drm/amdgpu: update default voltage for boot od table for navi1x
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency
drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)
drm/amdgpu: fetch default VDDC curve voltages (v2)
drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2)
drm/amdgpu/navi10: add OD_RANGE for navi overclocking
drm/amdgpu/navi: fix index for OD MCLK
drm/amd/display: Fix HW/SW state mismatch
drm/amd/display: Fix a typo when computing dsc configuration
drm/amd/powerplay: fix navi10 system intermittent reboot issue V2
drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode
drm/amd/display: Only enable cursor on pipes that need it
drm/nouveau/kms/gv100-: avoid sending a core update until the first modeset
drm/nouveau/kms/gv100-: move window ownership setup into modesetting path
drm/nouveau/disp/gv100-: halt NV_PDISP_FE_RM_INTR_STAT_CTRL_DISP_ERROR storms
...
Linus Torvalds [Fri, 7 Feb 2020 20:40:50 +0000 (12:40 -0800)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of fixes:
- Make of_clk.h self contained
- Fix new qcom DT bindings that just merged to match the DTS files
- Fix qcom clk driver to properly detect DFS clk frequencies
- Fix the ls1028a driver to not deref a pointer before assigning it"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
of: clk: Make <linux/of_clk.h> self-contained
clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for videocc-sc7180
dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for gpucc-sc7180
dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for dispcc-sc7180
clk: qcom: Get rid of fallback global names for dispcc-sc7180
dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
clk: ls1028a: fix a dereference of pointer 'parent' before a null check
dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
Linus Torvalds [Fri, 7 Feb 2020 20:30:16 +0000 (12:30 -0800)]
Merge tag 'linux-watchdog-5.6-rc1' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add IT8786 chipset ID
- addition of sam9x60 compatible watchdog
- da9062 improvements
- fix UAF in reboot notifier handling in watchdog core code
- other fixes and small improvements
* tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: da9062: make restart handler atomic safe
watchdog: mtk_wdt: mt2712: Add reset controller
watchdog: mtk_wdt: mt8183: Add reset controller
dt-bindings: mediatek: mt2712: Add #reset-cells
dt-bindings: mediatek: mt8183: Add #reset-cells
dt-bindings: watchdog: da9062: add suspend disable option
watchdog: it87_wdt: add IT8786 ID
watchdog: dw_wdt: ping watchdog to reset countdown before start
watchdog: fix UAF in reboot notifier handling in watchdog core code
watchdog: cadence: Skip printing pointer value
watchdog: qcom: Use platform_get_irq_optional() for bark irq
watchdog: da9062: add power management ops
watchdog: make DesignWare watchdog allow users to set bigger timeout value
drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
Linus Torvalds [Fri, 7 Feb 2020 20:26:34 +0000 (12:26 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Some bug fixes/cleanups.
The deprecated scsi passthrough for virtio_blk is removed"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: Fix memory leaks on errors in virtballoon_probe()
virtio-balloon: Fix memory leak when unloading while hinting is in progress
virtio_balloon: prevent pfn array overflow
virtio-blk: remove VIRTIO_BLK_F_SCSI support
virtio-pci: check name when counting MSI-X vectors
virtio-balloon: initialize all vq callbacks
virtio-mmio: convert to devm_platform_ioremap_resource
Linus Torvalds [Fri, 7 Feb 2020 20:22:29 +0000 (12:22 -0800)]
Merge tag 'xtensa-
20200206' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- reorganize exception vectors placement
- small cleanups (drop unused functions/headers/defconfig entries,
spelling fixes)
* tag 'xtensa-
20200206' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: ISS: improve simcall assembly
xtensa: reorganize vectors placement
xtensa: separate SMP and XIP support
xtensa: move fast exception handlers close to vectors
arch/xtensa: fix Kconfig typos for HAVE_SMP
xtensa: clean up optional XCHAL_* definitions
xtensa: drop unused function fast_coprocessor_double
xtensa: drop empty platform_* functions from platforms
xtensa: clean up platform headers
xtensa: drop set_except_vector declaration
xtensa: configs: Cleanup old Kconfig IO scheduler options
Dave Airlie [Fri, 7 Feb 2020 02:29:35 +0000 (12:29 +1000)]
Merge tag 'amd-drm-next-5.6-2020-02-05' of git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.6-2020-02-05:
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com
Dave Airlie [Fri, 7 Feb 2020 02:23:24 +0000 (12:23 +1000)]
Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-next
Just a couple of fixes to Volta/Turing modesetting on some systems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/
Dave Airlie [Fri, 7 Feb 2020 02:22:23 +0000 (12:22 +1000)]
Merge tag 'drm/tegra/for-5.6-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Fixes for v5.6-rc1
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com
Thierry Reding [Tue, 4 Feb 2020 13:59:26 +0000 (14:59 +0100)]
gpu: host1x: Set DMA direction only for DMA-mapped buffer objects
The DMA direction is only used by the DMA API, so there is no use in
setting it when a buffer object isn't mapped with the DMA API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Thierry Reding [Tue, 4 Feb 2020 13:59:25 +0000 (14:59 +0100)]
drm/tegra: Reuse IOVA mapping where possible
This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Cc: <stable@vger.kernel.org> # v5.5
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Thierry Reding [Tue, 4 Feb 2020 13:59:24 +0000 (14:59 +0100)]
drm/tegra: Relax IOMMU usage criteria on old Tegra
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Linus Torvalds [Thu, 6 Feb 2020 17:07:45 +0000 (09:07 -0800)]
Merge tag 'kvm-5.6-2' of git://git./virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
Linus Torvalds [Thu, 6 Feb 2020 17:05:42 +0000 (09:05 -0800)]
Merge tag 'kgdb-fixes-5.6-rc1' of git://git./linux/kernel/git/danielt/linux
Pull kgdb fix from Daniel Thompson:
"One of the simplifications added for 5.6-rc1 has caused build
regressions on some platforms (it was reported for sparc64).
This fixes it with a revert"
* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
Linus Torvalds [Thu, 6 Feb 2020 14:17:38 +0000 (14:17 +0000)]
Merge tag 'pci-v5.6-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
(Jason A. Donenfeld)
- Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
Sathyanarayanan)
* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ATS: Use PF PASID for VFs
x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
Linus Torvalds [Thu, 6 Feb 2020 14:15:01 +0000 (14:15 +0000)]
Merge tag 'sound-fix-5.6-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending small fixes:
ALSA core:
- PCM memory leak fix
ASoC:
- Lots of SOF and Intel driver fixes
- Addition of COMMON_CLK for wcd934x
- Regression fixes for AMD and Tegra platforms
HD-audio:
- DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix
Others:
- A few fixes relevant with the recent uapi-updates
- Sparse warnings and endianness fixes"
* tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Clear RIRB status before reading WP
ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
ALSA: hda - Fix DP-MST support for NVIDIA codecs
ASoC: wcd934x: Add missing COMMON_CLK dependency
MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
ASoC: tegra: Revert 24 and 32 bit support
ASoC: SOF: Intel: add PCI ID for JasperLake
ALSA: hdsp: Make the firmware loading ioctl a bit more readable
ALSA: emu10k1: Fix annotation and cast for the recent uapi header change
ALSA: dummy: Fix PCM format loop in proc output
ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk
ALSA: usb-audio: Fix endianess in descriptor validation
ALSA: hda: Add JasperLake PCI ID and codec vid
ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
ALSA: pcm: Fix memory leak at closing a stream without hw_free
ALSA: uapi: Fix sparse warning
ASoC: rt715: Add __maybe_unused to PM callbacks
ASoC: rt711: Add __maybe_unused to PM callbacks
ASoC: rt700: Add __maybe_unused to PM callbacks
...
Linus Torvalds [Thu, 6 Feb 2020 12:21:01 +0000 (12:21 +0000)]
Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
- a set of patches that fixes various corner cases in mount and umount
code (Xiubo Li). This has to do with choosing an MDS, distinguishing
between laggy and down MDSes and parsing the server path.
- inode initialization fixes (Jeff Layton). The one included here
mostly concerns things like open_by_handle() and there is another one
that will come through Al.
- copy_file_range() now uses the new copy-from2 op (Luis Henriques).
The existing copy-from op turned out to be infeasible for generic
filesystem use; we disable the copy offload if OSDs don't support
copy-from2.
- a patch to link "rbd" and "block" devices together in sysfs (Hannes
Reinecke)
... and a smattering of cleanups from Xiubo, Jeff and Chengguang.
* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
rbd: set the 'device' link in sysfs
ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
ceph: print name of xattr in __ceph_{get,set}xattr() douts
ceph: print r_direct_hash in hex in __choose_mds() dout
ceph: use copy-from2 op in copy_file_range
ceph: close holes in structs ceph_mds_session and ceph_mds_request
rbd: work around -Wuninitialized warning
ceph: allocate the correct amount of extra bytes for the session features
ceph: rename get_session and switch to use ceph_get_mds_session
ceph: remove the extra slashes in the server path
ceph: add possible_max_rank and make the code more readable
ceph: print dentry offset in hex and fix xattr_version type
ceph: only touch the caps which have the subset mask requested
ceph: don't clear I_NEW until inode metadata is fully populated
ceph: retry the same mds later after the new session is opened
ceph: check availability of mds cluster on mount after wait timeout
ceph: keep the session state until it is released
ceph: add __send_request helper
ceph: ensure we have a new cap before continuing in fill_inode
ceph: drop unused ttl_from parameter from fill_inode
...
Daniel Thompson [Thu, 6 Feb 2020 11:40:09 +0000 (11:40 +0000)]
Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
This reverts commit
bbfceba15f8d1260c328a254efc2b3f2deae4904.
When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Takashi Iwai [Thu, 6 Feb 2020 10:58:44 +0000 (11:58 +0100)]
Merge tag 'asoc-v5.6-3' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v5.6
An incremental fix for the Qualcomm COMMON_CLK issue.
Mohan Kumar [Thu, 6 Feb 2020 10:10:53 +0000 (15:40 +0530)]
ALSA: hda: Clear RIRB status before reading WP
RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Hildenbrand [Wed, 5 Feb 2020 16:34:01 +0000 (17:34 +0100)]
virtio_balloon: Fix memory leaks on errors in virtballoon_probe()
We forget to put the inode and unmount the kernfs used for compaction.
Fixes:
71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
David Hildenbrand [Wed, 5 Feb 2020 16:34:00 +0000 (17:34 +0100)]
virtio-balloon: Fix memory leak when unloading while hinting is in progress
When unloading the driver while hinting is in progress, we will not
release the free page blocks back to MM, resulting in a memory leak.
Fixes:
86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Thu, 6 Feb 2020 07:40:58 +0000 (02:40 -0500)]
virtio_balloon: prevent pfn array overflow
Make sure, at build time, that pfn array is big enough to hold a single
page. It happens to be true since the PAGE_SHIFT value at the moment is
20, which is 1M - exactly 256 4K balloon pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Christoph Hellwig [Thu, 12 Dec 2019 16:37:19 +0000 (17:37 +0100)]
virtio-blk: remove VIRTIO_BLK_F_SCSI support
Since the need for a special flag to support SCSI passthrough on a
block device was added in May 2017 the SCSI passthrough support in
virtio-blk has been disabled. It has always been a bad idea
(just ask the original author..) and we have virtio-scsi for proper
passthrough. The feature also never made it into the virtio 1.0
or later specifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel Verkamp [Fri, 3 Jan 2020 18:40:45 +0000 (10:40 -0800)]
virtio-pci: check name when counting MSI-X vectors
VQs without a name specified are not valid; they are skipped in the
later loop that assigns MSI-X vectors to queues, but the per_vq_vectors
loop above that counts the required number of vectors previously still
counted any queue with a non-NULL callback as needing a vector.
Add a check to the per_vq_vectors loop so that vectors with no name are
not counted to make the two loops consistent. This prevents
over-counting unnecessary vectors (e.g. for features which were not
negotiated with the device).
Cc: stable@vger.kernel.org
Fixes:
86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wang, Wei W <wei.w.wang@intel.com>
Daniel Verkamp [Fri, 3 Jan 2020 18:40:43 +0000 (10:40 -0800)]
virtio-balloon: initialize all vq callbacks
Ensure that elements of the callbacks array that correspond to
unavailable features are set to NULL; previously, they would be left
uninitialized.
Since the corresponding names array elements were explicitly set to
NULL, the uninitialized callback pointers would not actually be
dereferenced; however, the uninitialized callbacks elements would still
be read in vp_find_vqs_msix() and used to calculate the number of MSI-X
vectors required.
Cc: stable@vger.kernel.org
Fixes:
86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yangtao Li [Sun, 22 Dec 2019 19:08:39 +0000 (19:08 +0000)]
virtio-mmio: convert to devm_platform_ioremap_resource
Use devm_platform_ioremap_resource() to simplify code, which
contains platform_get_resource, devm_request_mem_region and
devm_ioremap.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linus Torvalds [Thu, 6 Feb 2020 08:13:23 +0000 (08:13 +0000)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A couple of changes:
- remove old CONFIG options from the m68knommu defconfig files
- fix a warning in the m68k non-MMU get_user() macro"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix memcpy() out of bounds warning in get_user()
m68k: configs: Cleanup old Kconfig IO scheduler options
Linus Torvalds [Thu, 6 Feb 2020 08:08:59 +0000 (08:08 +0000)]
Merge tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"One fix for an obscure error found using an old version of ping(1)
that did not use IPv6 sockets in the documented way"
* tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next:
broken ping to ipv6 linklocal addresses on debian buster
Linus Torvalds [Thu, 6 Feb 2020 07:58:38 +0000 (07:58 +0000)]
Merge tag 'xfs-5.6-merge-8' of git://git./fs/xfs/xfs-linux
Pull moar xfs updates from Darrick Wong:
"This contains the buffer error code refactoring I mentioned last week,
now that it has had extra time to complete the full xfs fuzz testing
suite to make sure there aren't any obvious new bugs"
* tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_buf_ioerror_alert location reporting
xfs: remove unnecessary null pointer checks from _read_agf callers
xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers
xfs: remove the xfs_btree_get_buf[ls] functions
xfs: make xfs_trans_get_buf return an error code
xfs: make xfs_trans_get_buf_map return an error code
xfs: make xfs_buf_read return an error code
xfs: make xfs_buf_get_uncached return an error code
xfs: make xfs_buf_get return an error code
xfs: make xfs_buf_read_map return an error code
xfs: make xfs_buf_get_map return an error code
xfs: make xfs_buf_alloc return an error code
Linus Torvalds [Thu, 6 Feb 2020 07:12:11 +0000 (07:12 +0000)]
Merge tag 'trace-v5.6-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
Kailang Yang [Wed, 5 Feb 2020 07:40:01 +0000 (15:40 +0800)]
ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.
Fixes:
5af29028fd6d ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 6 Feb 2020 06:33:17 +0000 (06:33 +0000)]
Merge tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Some later fixes for io_uring:
- Small cleanup series from Pavel
- Belt and suspenders build time check of sqe size and layout
(Stefan)
- Addition of ->show_fdinfo() on request of Jann Horn, to aid in
understanding mapped personalities
- eventfd recursion/deadlock fix, for both io_uring and aio
- Fixup for send/recv handling
- Fixup for double deferral of read/write request
- Fix for potential double completion event for close request
- Adjust fadvise advice async/inline behavior
- Fix for shutdown hang with SQPOLL thread
- Fix for potential use-after-free of fixed file table"
* tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
io_uring: cleanup fixed file data table references
io_uring: spin for sq thread to idle on shutdown
aio: prevent potential eventfd recursion on poll
io_uring: put the flag changing code in the same spot
io_uring: iterate req cache backwards
io_uring: punt even fadvise() WILLNEED to async context
io_uring: fix sporadic double CQE entry for close
io_uring: remove extra ->file check
io_uring: don't map read/write iovec potentially twice
io_uring: use the proper helpers for io_send/recv
io_uring: prevent potential eventfd recursion on poll
eventfd: track eventfd_signal() recursion depth
io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe
io_uring: add ->show_fdinfo() for the io_uring file descriptor
Linus Torvalds [Thu, 6 Feb 2020 06:15:23 +0000 (06:15 +0000)]
Merge tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later arrivals, but all fixes at this point:
- bcache fix series (Coly)
- Series of BFQ fixes (Paolo)
- NVMe pull request from Keith with a few minor NVMe fixes
- Various little tweaks"
* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
brd: check and limit max_part par
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
block, bfq: clarify the goal of bfq_split_bfqq()
block, bfq: get a ref to a group when adding it to a service tree
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: extend incomplete name of field on_st
block, bfq: get extra ref to prevent a queue from being freed during a group move
block, bfq: do not insert oom queue into position tree
block, bfq: do not plug I/O for bfq_queues with no proc refs
bcache: check return value of prio_read()
bcache: fix incorrect data type usage in btree_flush_write()
bcache: add readahead cache policy options via sysfs interface
bcache: explicity type cast in bset_bkey_last()
bcache: fix memory corruption in bch_cache_accounting_clear()
xen/blkfront: limit allocated memory size to actual use case
...
Linus Torvalds [Thu, 6 Feb 2020 06:11:50 +0000 (06:11 +0000)]
Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe:
- Add a Sandisk CF card to supported pata_pcmcia list (Christian)
- Move pata_arasan_cf away from legacy API (Peter)
- Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)
* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
ata: ahci: Add shutdown to freeze hardware resources of ahci
pata_pcmia: add SanDisk High (>8G) CF card to supported list
Geert Uytterhoeven [Wed, 5 Feb 2020 19:46:49 +0000 (20:46 +0100)]
of: clk: Make <linux/of_clk.h> self-contained
Depending on include order:
include/linux/of_clk.h:11:45: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
unsigned int of_clk_get_parent_count(struct device_node *np);
^~~~~~~~~~~
include/linux/of_clk.h:12:43: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
const char *of_clk_get_parent_name(struct device_node *np, int index);
^~~~~~~~~~~
include/linux/of_clk.h:13:31: warning: ‘struct of_device_id’ declared inside parameter list will not be visible outside of this definition or declaration
void of_clk_init(const struct of_device_id *matches);
^~~~~~~~~~~~
Fix this by adding forward declarations for struct device_node and
struct of_device_id.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20200205194649.31309-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Masami Hiramatsu [Wed, 5 Feb 2020 13:50:23 +0000 (22:50 +0900)]
bootconfig: Show the number of nodes on boot message
Show the number of bootconfig nodes on boot message.
Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Wed, 5 Feb 2020 13:50:13 +0000 (22:50 +0900)]
tools/bootconfig: Show the number of bootconfig nodes
Show the number of bootconfig nodes when applying new bootconfig to
initrd.
Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.
Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Wed, 5 Feb 2020 13:50:04 +0000 (22:50 +0900)]
bootconfig: Add more parse error messages
Add more error messages for following cases.
- Exceeding max number of nodes
- Config tree data is empty (e.g. comment only)
- Config data is empty or exceeding max size
- bootconfig is already initialized
Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Wed, 5 Feb 2020 13:49:54 +0000 (22:49 +0900)]
bootconfig: Use bootconfig instead of boot config
Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.
Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Wed, 5 Feb 2020 14:20:32 +0000 (09:20 -0500)]
ftrace: Protect ftrace_graph_hash with ftrace_sync
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes:
b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Casey Schaufler [Mon, 3 Feb 2020 17:15:00 +0000 (09:15 -0800)]
broken ping to ipv6 linklocal addresses on debian buster
I am seeing ping failures to IPv6 linklocal addresses with Debian
buster. Easiest example to reproduce is:
$ ping -c1 -w1 ff02::1%eth1
connect: Invalid argument
$ ping -c1 -w1 ff02::1%eth1
PING ff02::01%eth1(ff02::1%eth1) 56 data bytes
64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms
git bisect traced the failure to
commit
b9ef5513c99b ("smack: Check address length before reading address family")
Arguably ping is being stupid since the buster version is not setting
the address family properly (ping on stretch for example does):
$ strace -e connect ping6 -c1 -w1 ff02::1%eth1
connect(5, {sa_family=AF_UNSPEC,
sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28)
= -1 EINVAL (Invalid argument)
but the command works fine on kernels prior to this commit, so this is
breakage which goes against the Linux paradigm of "don't break userspace"
Cc: stable@vger.kernel.org
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
security/smack/smack_lsm.c | 41 +++++++++++++++++++----------------------
1 file changed, 19 insertions(+), 22 deletions(-)
Steven Rostedt (VMware) [Wed, 5 Feb 2020 07:17:57 +0000 (02:17 -0500)]
ftrace: Add comment to why rcu_dereference_sched() is open coded
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Amol Grover [Wed, 5 Feb 2020 05:57:02 +0000 (11:27 +0530)]
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison
Use rcu_dereference_protected to dereference the newly annotated pointer.
Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Amol Grover [Sat, 1 Feb 2020 07:27:04 +0000 (12:57 +0530)]
tracing: Annotate ftrace_graph_hash pointer with __rcu
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison
Use rcu_dereference_protected to access the __rcu annotated pointer.
Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Wed, 5 Feb 2020 18:11:51 +0000 (18:11 +0000)]
Merge tag 'pwm/for-5.6-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
Linus Torvalds [Wed, 5 Feb 2020 18:07:39 +0000 (18:07 +0000)]
Merge tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Fixes for:
- Documentation build error fix
- Fix dma_request_chan() error return
- Remove unneeded conversion in idxd driver
- Fix pointer check for dma_async_device_channel_register()
- Fix slave-channel symlink cleanup"
* tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Cleanups for the slave <-> channel symlink support
dmaengine: fix null ptr check for __dma_async_device_channel_register()
dmaengine: idxd: fix boolconv.cocci warnings
dmaengine: Fix return value for dma_request_chan() in case of failure
dmaengine: doc: Properly indent metadata title
Kuppuswamy Sathyanarayanan [Wed, 29 Jan 2020 19:14:00 +0000 (11:14 -0800)]
PCI/ATS: Use PF PASID for VFs
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability. But commit
751035b8dc06 ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device. This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.
In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.
Fixes:
751035b8dc06 ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v5.5+
Linus Torvalds [Wed, 5 Feb 2020 17:49:54 +0000 (17:49 +0000)]
Merge tag 'iommu-updates-v5.6' of git://git./linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (
6855d1ba7537) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
Linus Torvalds [Wed, 5 Feb 2020 17:44:14 +0000 (17:44 +0000)]
Merge tag 'for-linus-5.6-rc1-tag' of git://git./linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix a bug introduced in 5.5 in the Xen gntdev driver
- fix the Xen balloon driver when running on ancient Xen versions
- allow Xen stubdoms to control interrupt enable flags of
passed-through PCI cards
- release resources in Xen backends under memory pressure
* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/blkback: Consistently insert one empty line between functions
xen/blkback: Remove unnecessary static variable name prefixes
xen/blkback: Squeeze page pools if a memory pressure is detected
xenbus/backend: Protect xenbus callback with lock
xenbus/backend: Add memory pressure handler callback
xen/gntdev: Do not use mm notifiers with autotranslating guests
xen/balloon: Support xend-based toolstack take two
xen-pciback: optionally allow interrupt enable flag writes
Linus Torvalds [Wed, 5 Feb 2020 17:37:25 +0000 (17:37 +0000)]
Merge tag 'devicetree-fixes-for-5.6' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix incorrect $id paths in schemas
- Two fixes for Intel LGM SoC binding schemas
* tag 'devicetree-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix paths in schema $id fields
dt-bindings: PCI: intel: Fix dt_binding_check compilation failure
dt-bindings: phy: Fix errors in intel,lgm-emmc-phy example
Linus Torvalds [Wed, 5 Feb 2020 17:33:35 +0000 (17:33 +0000)]
Merge tag 's390-5.6-2' of git://git./linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
Miaohe Lin [Wed, 5 Feb 2020 15:33:53 +0000 (23:33 +0800)]
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
The function vmx_decache_cr0_guest_bits() is only called below its
implementation. So this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Jan 2020 23:53:44 +0000 (15:53 -0800)]
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
Re-add code to mark CR4.UMIP as reserved if UMIP is not supported by the
host. The UMIP handling was unintentionally dropped during a recent
refactoring.
Not flagging CR4.UMIP allows the guest to set its CR4.UMIP regardless of
host support or userspace desires. On CPUs with UMIP support, including
emulated UMIP, this allows the guest to enable UMIP against the wishes
of the userspace VMM. On CPUs without any form of UMIP, this results in
a failed VM-Enter due to invalid guest state.
Fixes:
345599f9a2928 ("KVM: x86: Add macro to ensure reserved cr4 bits checks stay in sync")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 5 Feb 2020 15:20:23 +0000 (16:20 +0100)]
x86: vmxfeatures: rename features for consistency with KVM and manual
Three of the feature bits in vmxfeatures.h have names that are different
from the Intel SDM. The names have been adjusted recently in KVM but they
were using the old name in the tip tree's x86/cpu branch. Adjust for
consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 5 Feb 2020 15:15:05 +0000 (16:15 +0100)]
Merge tag 'kvm-s390-next-5.6-1' of git://git./linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes and cleanups for 5.6
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
Paolo Bonzini [Wed, 5 Feb 2020 15:10:52 +0000 (16:10 +0100)]
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
Userspace that does not know about the AMD_IBRS bit might still
allow the guest to protect itself with MSR_IA32_SPEC_CTRL using
the Intel SPEC_CTRL bit. However, svm.c disallows this and will
cause a #GP in the guest when writing to the MSR. Fix this by
loosening the test and allowing the Intel CPUID bit, and in fact
allow the AMD_STIBP bit as well since it allows writing to
MSR_IA32_SPEC_CTRL too.
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eric Hankland [Mon, 27 Jan 2020 21:22:56 +0000 (13:22 -0800)]
KVM: x86: Fix perfctr WRMSR for running counters
Correct the logic in intel_pmu_set_msr() for fixed and general purpose
counters. This was recently changed to set pmc->counter without taking
in to account the value of pmc_read_counter() which will be incorrect if
the counter is currently running and non-zero; this changes back to the
old logic which accounted for the value of currently running counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 5 Feb 2020 12:30:34 +0000 (13:30 +0100)]
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX
controls on for its guests and nested_vmx_check_controls() checks for
that. This is, however, not the case for the controls which are supported
on the host but are missing in enlightened VMCS and when eVMCS is in use.
It would certainly be possible to add these missing checks to
nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems
preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on
non-eVMCS guests by doing less unrelated checks. Create a separate
nested_evmcs_check_controls() for this purpose.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 5 Feb 2020 12:30:33 +0000 (13:30 +0100)]
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS
with default (matching CPU model) values and in case eVMCS is also enabled,
fails.
It would be possible to drop VMX feature filtering completely and make
this a guest's responsibility: if it decides to use eVMCS it should know
which fields are available and which are not. Hyper-V mostly complies to
this, however, there are some problematic controls:
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES
VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL
which Hyper-V enables. As there are no corresponding fields in eVMCS, we
can't handle this properly in KVM. This is a Hyper-V issue.
Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(),
and do the bare minimum (only clear controls which are known to cause issues).
This allows userspace to keep setting controls it wants and at the same
time hides them from the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 3 Feb 2020 23:09:10 +0000 (15:09 -0800)]
kvm: mmu: Separate generating and setting mmio ptes
Separate the functions for generating MMIO page table entries from the
function that inserts them into the paging structure. This refactoring
will facilitate changes to the MMU sychronization model to use atomic
compare / exchanges (which are not guaranteed to succeed) instead of a
monolithic MMU lock.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 3 Feb 2020 23:09:09 +0000 (15:09 -0800)]
kvm: mmu: Replace unsigned with unsigned int for PTE access
There are several functions which pass an access permission mask for
SPTEs as an unsigned. This works, but checkpatch complains about it.
Switch the occurrences of unsigned to unsigned int to satisfy checkpatch.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 Feb 2020 15:32:59 +0000 (07:32 -0800)]
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
The blurb pertaining to the return value of nested_vmx_load_cr3() no
longer matches reality, remove it entirely as the behavior it is
attempting to document is quite obvious when reading the actual code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 3 Feb 2020 18:42:00 +0000 (10:42 -0800)]
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
Fold kvm_mips_comparecount_func() into kvm_mips_comparecount_wakeup() to
eliminate the nondescript function name as well as its unnecessary cast
of a vcpu to "unsigned long" and back to a vcpu. Presumably func() was
used as a callback at some point during pre-upstream development, as
wakeup() is the only user of func() and has been the only user since
both with introduced by commit
669e846e6c4e ("KVM/MIPS32: MIPS arch
specific APIs for KVM").
Cc: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 3 Feb 2020 18:41:59 +0000 (10:41 -0800)]
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
Hoist kvm_mips_comparecount_wakeup() above its only user,
kvm_arch_vcpu_create() to fix a compilation error due to referencing an
undefined function.
Fixes:
d11dfed5d700 ("KVM: MIPS: Move all vcpu init code into kvm_arch_vcpu_create()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thadeu Lima de Souza Cascardo [Fri, 31 Jan 2020 15:56:55 +0000 (12:56 -0300)]
x86/kvm: do not setup pv tlb flush when not paravirtualized
kvm_setup_pv_tlb_flush will waste memory and print a misguiding message
when KVM paravirtualization is not available.
Intel SDM says that the when cpuid is used with EAX higher than the
maximum supported value for basic of extended function, the data for the
highest supported basic function will be returned.
So, in some systems, kvm_arch_para_features will return bogus data,
causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush.
Testing for kvm_para_available will work as it checks for the hypervisor
signature.
Besides, when the "nopv" command line parameter is used, it should not
continue as well, as kvm_guest_init will no be called in that case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhuang Yanying [Sat, 12 Oct 2019 03:37:31 +0000 (11:37 +0800)]
KVM: fix overflow of zero page refcount with ksm running
We are testing Virtual Machine with KSM on v5.4-rc2 kernel,
and found the zero_page refcount overflow.
The cause of refcount overflow is increased in try_async_pf
(get_user_page) without being decreased in mmu_set_spte()
while handling ept violation.
In kvm_release_pfn_clean(), only unreserved page will call
put_page. However, zero page is reserved.
So, as well as creating and destroy vm, the refcount of
zero page will continue to increase until it overflows.
step1:
echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan
echo 1 > /sys/kernel/pages_to_scan/run
echo 1 > /sys/kernel/pages_to_scan/use_zero_pages
step2:
just create several normal qemu kvm vms.
And destroy it after 10s.
Repeat this action all the time.
After a long period of time, all domains hang because
of the refcount of zero page overflow.
Qemu print error log as follow:
…
error: kvm run failed Bad address
EAX=
00006cdc EBX=
00000008 ECX=
80202001 EDX=
078bfbfd
ESI=
ffffffff EDI=
00000000 EBP=
00000008 ESP=
00006cc4
EIP=
000efd75 EFL=
00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010
00000000 ffffffff 00c09300 DPL=0 DS [-WA]
CS =0008
00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010
00000000 ffffffff 00c09300 DPL=0 DS [-WA]
DS =0010
00000000 ffffffff 00c09300 DPL=0 DS [-WA]
FS =0010
00000000 ffffffff 00c09300 DPL=0 DS [-WA]
GS =0010
00000000 ffffffff 00c09300 DPL=0 DS [-WA]
LDT=0000
00000000 0000ffff 00008200 DPL=0 LDT
TR =0000
00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=
000f7070 00000037
IDT=
000f70ae 00000000
CR0=
00000011 CR2=
00000000 CR3=
00000000 CR4=
00000000
DR0=
0000000000000000 DR1=
0000000000000000 DR2=
0000000000000000 DR3=
0000000000000000
DR6=
00000000ffff0ff0 DR7=
0000000000000400
EFER=
0000000000000000
Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04
…
Meanwhile, a kernel warning is departed.
[40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30
[40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5
[40914.836415] RIP: 0010:try_get_page+0x1f/0x30
[40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0
0 00 00 00 48 8b 47 08 a8
[40914.836418] RSP: 0018:
ffffb4144e523988 EFLAGS:
00010286
[40914.836419] RAX:
0000000080000000 RBX:
0000000000000326 RCX:
0000000000000000
[40914.836420] RDX:
0000000000000000 RSI:
00004ffdeba10000 RDI:
ffffdf07093f6440
[40914.836421] RBP:
ffffdf07093f6440 R08:
800000424fd91225 R09:
0000000000000000
[40914.836421] R10:
ffff9eb41bfeebb8 R11:
0000000000000000 R12:
ffffdf06bbd1e8a8
[40914.836422] R13:
0000000000000080 R14:
800000424fd91225 R15:
ffffdf07093f6440
[40914.836423] FS:
00007fb60ffff700(0000) GS:
ffff9eb4802c0000(0000) knlGS:
0000000000000000
[40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[40914.836426] CR2:
0000000000000000 CR3:
0000002f220e6002 CR4:
00000000003626e0
[40914.836427] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[40914.836427] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[40914.836428] Call Trace:
[40914.836433] follow_page_pte+0x302/0x47b
[40914.836437] __get_user_pages+0xf1/0x7d0
[40914.836441] ? irq_work_queue+0x9/0x70
[40914.836443] get_user_pages_unlocked+0x13f/0x1e0
[40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm]
[40914.836486] try_async_pf+0x87/0x240 [kvm]
[40914.836503] tdp_page_fault+0x139/0x270 [kvm]
[40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm]
[40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm]
[40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm]
[40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm]
[40914.836650] do_vfs_ioctl+0xa9/0x620
[40914.836653] ksys_ioctl+0x60/0x90
[40914.836654] __x64_sys_ioctl+0x16/0x20
[40914.836658] do_syscall_64+0x5b/0x180
[40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[40914.836666] RIP: 0033:0x7fb61cb6bfc7
Signed-off-by: LinFeng <linfeng23@huawei.com>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 24 Jan 2020 23:07:22 +0000 (15:07 -0800)]
KVM: x86: Take a u64 when checking for a valid dr7 value
Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build
warning on i386 due to right-shifting a 32-bit value by 32 when checking
for bits being set in dr7[63:32].
Alternatively, the warning could be resolved by rewriting the check to
use an i386-friendly method, but taking a u64 fixes another oddity on
32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to
avoid layout issues between 32-bit and 64-bit, a devious guest can stuff
vmcs12->guest_dr7 with a 64-bit value even when both the guest and host
are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when
propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely
on that behavior for correctness.
Cc: Jim Mattson <jmattson@google.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Fixes:
ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jan 2020 13:36:09 +0000 (14:36 +0100)]
KVM: x86: use raw clock values consistently
Commit
53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw
clock") changed kvmclock to use tkr_raw instead of tkr_mono. However,
the default kvmclock_offset for the VM was still based on the monotonic
clock and, if the raw clock drifted enough from the monotonic clock,
this could cause a negative system_time to be written to the guest's
struct pvclock. RHEL5 does not like it and (if it boots fast enough to
observe a negative time value) it hangs.
There is another thing to be careful about: getboottime64 returns the
host boot time with tkr_mono frequency, and subtracting the tkr_raw-based
kvmclock value will cause the wallclock to be off if tkr_raw drifts
from tkr_mono. To avoid this, compute the wallclock delta from the
current time instead of being clever and using getboottime64.
Fixes:
53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jan 2020 13:32:20 +0000 (14:32 +0100)]
KVM: x86: reorganize pvclock_gtod_data members
We will need a copy of tk->offs_boot in the next patch. Store it and
cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot
included, store the raw value in struct pvclock_clock and sum it in
do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves
to struct pvclock_clock.
While at it, fix a (usually harmless) typo in do_monotonic_raw, which
was using gtod->clock.shift instead of gtod->raw_clock.shift.
Fixes:
53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Thu, 23 Jan 2020 02:08:20 +0000 (10:08 +0800)]
KVM: nVMX: delete meaningless nested_vmx_run() declaration
The function nested_vmx_run() declaration is below its implementation. So
this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jan 2020 16:02:36 +0000 (17:02 +0100)]
KVM: SVM: allow AVIC without split irqchip
SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets
up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT
are in use.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:19 +0000 (14:15 -0600)]
kvm: ioapic: Lazy update IOAPIC EOI
In-kernel IOAPIC does not receive EOI with AMD SVM AVIC
since the processor accelerate write to APIC EOI register and
does not trap if the interrupt is edge-triggered.
Workaround this by lazy check for pending APIC EOI at the time when
setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:18 +0000 (14:15 -0600)]
kvm: ioapic: Refactor kvm_ioapic_update_eoi()
Refactor code for handling IOAPIC EOI for subsequent patch.
There is no functional change.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:16 +0000 (14:15 -0600)]
kvm: i8254: Deactivate APICv when using in-kernel PIT re-injection mode.
AMD SVM AVIC accelerates EOI write and does not trap. This causes
in-kernel PIT re-injection mode to fail since it relies on irq-ack
notifier mechanism. So, APICv is activated only when in-kernel PIT
is in discard mode e.g. w/ qemu option:
-global kvm-pit.lost_tick_policy=discard
Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this
reason.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:15 +0000 (14:15 -0600)]
svm: Temporarily deactivate AVIC during ExtINT handling
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary
deactivated and fall back to using legacy interrupt injection via vINTR
and interrupt window.
Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:14 +0000 (14:15 -0600)]
svm: Deactivate AVIC when launching guest with nested SVM support
Since AVIC does not currently work w/ nested virtualization,
deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM]
(i.e. indicate support for SVM, which is needed for nested virtualization).
Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for
this reason.
Suggested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:13 +0000 (14:15 -0600)]
kvm: x86: hyperv: Use APICv update request interface
Since disabling APICv has to be done for all vcpus on AMD-based
system, adopt the newly introduced kvm_request_apicv_update()
interface, and introduce a new APICV_INHIBIT_REASON_HYPERV.
Also, remove the kvm_vcpu_deactivate_apicv() since no longer used.
Cc: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:12 +0000 (14:15 -0600)]
svm: Add support for dynamic APICv
Add necessary logics to support (de)activate AVIC at runtime.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:11 +0000 (14:15 -0600)]
kvm: x86: Introduce x86 ops hook for pre-update APICv
AMD SVM AVIC needs to update APIC backing page mapping before changing
APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl
function hook to be called prior KVM APICv update request to each vcpu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:10 +0000 (14:15 -0600)]
kvm: x86: Introduce APICv x86 ops for checking APIC inhibit reasons
Inibit reason bits are used to determine if APICv deactivation is
applicable for a particular hardware virtualization architecture.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:09 +0000 (14:15 -0600)]
KVM: svm: avic: Add support for dynamic setup/teardown of virtual APIC backing page
Re-factor avic_init_access_page() to avic_update_access_page() since
activate/deactivate AVIC requires setting/unsetting the memory region used
for virtual APIC backing page (APIC_ACCESS_PAGE_PRIVATE_MEMSLOT).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:08 +0000 (14:15 -0600)]
kvm: x86: svm: Add support to (de)activate posted interrupts
Introduce interface for (de)activate posted interrupts, and
implement SVM hooks to toggle AMD IOMMU guest virtual APIC mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:07 +0000 (14:15 -0600)]
kvm: x86: Add APICv (de)activate request trace points
Add trace points when sending request to (de)activate APICv.
Suggested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:06 +0000 (14:15 -0600)]
kvm: x86: Add support for dynamic APICv activation
Certain runtime conditions require APICv to be temporary deactivated
during runtime. The current implementation only support run-time
deactivation of APICv when Hyper-V SynIC is enabled, which is not
temporary.
In addition, for AMD, when APICv is (de)activated at runtime,
all vcpus in the VM have to operate in the same mode. Thus the
requesting vcpu must notify the others.
So, introduce the following:
* A new KVM_REQ_APICV_UPDATE request bit
* Interfaces to request all vcpus to update APICv status
* A new interface to update APICV-related parameters for each vcpu
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jan 2020 15:54:37 +0000 (16:54 +0100)]
KVM: x86: remove get_enable_apicv from kvm_x86_ops
It is unused now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:05 +0000 (14:15 -0600)]
kvm: x86: Introduce APICv inhibit reason bits
There are several reasons in which a VM needs to deactivate APICv
e.g. disable APICv via parameter during module loading, or when
enable Hyper-V SynIC support. Additional inhibit reasons will be
introduced later on when dynamic APICv is supported,
Introduce KVM APICv inhibit reason bits along with a new variable,
apicv_inhibit_reasons, to help keep track of APICv state for each VM,
Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate
the case where APICv is disabled during KVM module load.
(e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 14 Nov 2019 20:15:04 +0000 (14:15 -0600)]
kvm: lapic: Introduce APICv update helper function
Re-factor code into a helper function for setting lapic parameters when
activate/deactivate APICv, and export the function for subsequent usage.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Takashi Iwai [Wed, 5 Feb 2020 11:33:45 +0000 (12:33 +0100)]
Merge tag 'asoc-v5.6-2' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.6
A collection of updates for bugs fixed since the initial pull
request, the most important one being the addition of COMMON_CLK
for wcd934x which is needed for MFD to be merged.
Geert Uytterhoeven [Tue, 4 Feb 2020 13:18:57 +0000 (14:18 +0100)]
ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not
sufficient, as enabling SND_SOC_ALL_CODECS will still select it,
breaking the build later:
WARNING: unmet direct dependencies detected for SND_SOC_WCD934X
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m]
Selected by [m]:
- SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m]
...
ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
Fix this by adding the missing dependency to SND_SOC_ALL_CODECS
Fixes:
42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200204131857.7634-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Steven Rostedt (VMware) [Tue, 4 Feb 2020 12:33:53 +0000 (07:33 -0500)]
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.
As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.
Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.
Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rob Herring [Fri, 31 Jan 2020 15:27:12 +0000 (09:27 -0600)]
dt-bindings: Fix paths in schema $id fields
The $id path checks were inadequately checking the path part of the $id
value. With the check fixed, there's a number of errors that need to be
fixed. Most of the errors are including 'bindings/' in the path which
should not be as that is considered the root.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Stefan Popa <stefan.popa@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Wed, 5 Feb 2020 07:29:40 +0000 (07:29 +0000)]
Merge branch 'parisc-5.6-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"A page table initialization cleanup from Mike Rapoport and regenerated
defconfig files from Helge Deller"
* 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Regenerate parisc defconfigs
parisc: map_pages(): cleanup page table initialization
Max Filippov [Tue, 4 Feb 2020 20:51:21 +0000 (12:51 -0800)]
xtensa: ISS: improve simcall assembly
Drop redundant result moving from inline assembly, use a1 and b1 values
as return value and errno value respectively.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Sat, 1 Feb 2020 04:11:24 +0000 (20:11 -0800)]
xtensa: reorganize vectors placement
Allow vectors to be either merged into the kernel .text or put at a
fixed virtual address independently of XIP option. Drop option that
puts vectors at a fixed offset from the kernel text. Add choice to
Kconfig.
Vectors at fixed virtual address may be useful for XIP-aware MTD support
and for noMMU configurations with available IRAM. Configurations without
VECBASE register must put their vectors at specific locations regardless
of the selected option. All other configurations should happily use
merged vectors.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Sat, 1 Feb 2020 05:25:03 +0000 (21:25 -0800)]
xtensa: separate SMP and XIP support
There's no real dependency between SMP and XIP, allow them to be
selected together. Always define 2- and 4-argument SECTION_VECTOR
macros, always use 4-argument macro for the secondary reset vector and
always define relocation entry for it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Sat, 1 Feb 2020 02:48:43 +0000 (18:48 -0800)]
xtensa: move fast exception handlers close to vectors
On XIP kernels it makes sense to have exception vectors and fast
exception handlers together (in a fast memory). In addition, with MTD
XIP support both vectors and fast exception handlers must be outside of
the FLASH.
Add section .exception.text and move fast exception handlers to it.
Put it together with vectors when vectors are outside of the .text.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Linus Torvalds [Wed, 5 Feb 2020 05:28:20 +0000 (05:28 +0000)]
Merge tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy
Pull jfs update from David Kleikamp:
"Trivial cleanup for jfs"
* tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy:
jfs: remove unused MAXL2PAGES
Linus Torvalds [Wed, 5 Feb 2020 05:09:46 +0000 (05:09 +0000)]
Merge branch 'work.recursive_removal' of git://git./linux/kernel/git/viro/vfs
Pull vfs recursive removal updates from Al Viro:
"We have quite a few places where synthetic filesystems do an
equivalent of 'rm -rf', with varying amounts of code duplication,
wrong locking, etc. That really ought to be a library helper.
Only debugfs (and very similar tracefs) are converted here - I have
more conversions, but they'd never been in -next, so they'll have to
wait"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
Linus Torvalds [Wed, 5 Feb 2020 05:02:42 +0000 (05:02 +0000)]
Merge branch 'imm.timestamp' of git://git./linux/kernel/git/viro/vfs
Pull vfs timestamp updates from Al Viro:
"More 64bit timestamp work"
* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: don't bother with timestamp truncation
fs: Do not overload update_time
fs: Delete timespec64_trunc()
fs: ubifs: Eliminate timespec64_trunc() usage
fs: ceph: Delete timespec64_trunc() usage
fs: cifs: Delete usage of timespec64_trunc
fs: fat: Eliminate timespec64_trunc() usage
utimes: Clamp the timestamps in notify_change()
Lyude Paul [Fri, 24 Jan 2020 19:10:46 +0000 (14:10 -0500)]
drm/amd/dm/mst: Ignore payload update failures
Disabling a display on MST can potentially happen after the entire MST
topology has been removed, which means that we can't communicate with
the topology at all in this scenario. Likewise, this also means that we
can't properly update payloads on the topology and as such, it's a good
idea to ignore payload update failures when disabling displays.
Currently, amdgpu makes the mistake of halting the payload update
process when any payload update failures occur, resulting in leaving
DC's local copies of the payload tables out of date.
This ends up causing problems with hotplugging MST topologies, and
causes modesets on the second hotplug to fail like so:
[drm] Failed to updateMST allocation table forpipe idx:1
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1511 at
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677
update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack
nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4
nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc
vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic
snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops
videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul
snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core
ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm
sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd
wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O)
rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm
crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core
rtsx_pci pinctrl_amd
CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4
Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019
RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06
49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9
2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:
ffffac428127f5b0 EFLAGS:
00010202
RAX:
0000000000000002 RBX:
ffff8d1e166eee80 RCX:
0000000000000000
RDX:
ffffac428127f668 RSI:
ffff8d1e166eee80 RDI:
ffffac428127f610
RBP:
ffffac428127f640 R08:
ffffffffc03d94a8 R09:
0000000000000000
R10:
ffff8d1e24b02000 R11:
ffffac428127f5b0 R12:
ffff8d1e1b83d000
R13:
ffff8d1e1bea0b08 R14:
0000000000000002 R15:
0000000000000002
FS:
00007fab23ffcd80(0000) GS:
ffff8d1e28b40000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f151f1711e8 CR3:
00000005997c0000 CR4:
00000000003406e0
Call Trace:
? mutex_lock+0xe/0x30
dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu]
? dm_read_reg_func+0x39/0xb0 [amdgpu]
? core_link_enable_stream+0x656/0x730 [amdgpu]
core_link_enable_stream+0x656/0x730 [amdgpu]
dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu]
? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu]
? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu]
dc_commit_state+0x292/0x770 [amdgpu]
? add_timer+0x101/0x1f0
? ttm_bo_put+0x1a1/0x2f0 [ttm]
amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu]
? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu]
? amdgpu_bo_move+0x16d/0x2b0 [amdgpu]
? ttm_bo_handle_move_mem+0x118/0x570 [ttm]
? ttm_bo_validate+0x134/0x150 [ttm]
? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu]
? _cond_resched+0x15/0x30
? wait_for_completion_timeout+0x38/0x160
? _cond_resched+0x15/0x30
? wait_for_completion_interruptible+0x33/0x190
commit_tail+0x94/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper]
drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
drm_mode_setcrtc+0x194/0x6a0 [drm]
? _cond_resched+0x15/0x30
? mutex_lock+0xe/0x30
? drm_mode_getcrtc+0x180/0x180 [drm]
drm_ioctl_kernel+0xaa/0xf0 [drm]
drm_ioctl+0x208/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
do_vfs_ioctl+0x458/0x6d0
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fab2121f87b
Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48
RSP: 002b:
00007ffd045f9068 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007ffd045f90a0 RCX:
00007fab2121f87b
RDX:
00007ffd045f90a0 RSI:
00000000c06864a2 RDI:
000000000000000b
RBP:
00007ffd045f90a0 R08:
0000000000000000 R09:
000055dbd2985d10
R10:
000055dbd2196280 R11:
0000000000000246 R12:
00000000c06864a2
R13:
000000000000000b R14:
0000000000000000 R15:
000055dbd2196280
---[ end trace
6ea888c24d2059cd ]---
Note as well, I have only been able to reproduce this on setups with 2
MST displays.
Changes since v1:
* Don't return false when part 1 or part 2 of updating the payloads
fails, we don't want to abort at any step of the process even if
things fail
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux-2.6-microblaze.git / log