drm/i915: Clean up 12.4bit precision palette defines

Use consistent bit definitions for the 12.4bit precision palette bits.
We just define these alongside the ilk/snb register definitions and
point to those from the icl+ superfine segment defines (and we also
already pointed to them from the ivb+ precision palette defines).

Also use the these appropriately in the LUT entry pack/unpack
functions.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114153732.11773-4-ville.syrjala@linux.intel.com

drm/i915: Clean up 10bit precision palette defines

Use consistent bit definitions for the 10bit precision palette bits.
We just define these alongside the ilk/snb register definitions and
point to those from the ivb+ defines.

Also use the these appropriately in the LUT entry pack/unpack
functions.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114153732.11773-3-ville.syrjala@linux.intel.com

drm/i915: Clean up legacy palette defines

Use consistent bit definitions for the legacy gamma LUT. We just
define these alongside the pre-ilk register definitions and point
to those from the ilk+ defines.

Also use the these appropriately in the LUT entry pack/unpack
functions.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114153732.11773-2-ville.syrjala@linux.intel.com

drm/i915: Add device name to display tracepoints

Include dev_name() in the tracpoints so one can filter based on
the device.

Example:
echo 'dev=="0000:00:02.0"' > events/i915/intel_cpu_fifo_underrun/filter

v2: Reduce the magic macros, rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111123120.7759-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Pass i915 to frontbuffer tracepoints

Pass the device to the frontbuffer tracpoints. Will be used
later to include the device name in the tracpoints.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111123120.7759-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Print plane name in fbc tracepoints

Print the name of the plane in the fbc tracepoints. As the
pipe<->plane assignment can vary on old hw it's probably
more helpful to see both the plane and the pipe names together.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111123120.7759-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Pass intel_plane to plane tracepoints

Pass intel_plane rather than drm_plane to the plane tracepoints.
Matches what we do eg. with the fbc tracepoints. Using the same
type for everything will help with digging out the device name
from the plane in the future.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111123120.7759-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: move restore state and ctx under display sub-struct

Move display suspend/resume and display reset modeset state and ctx
members under drm_i915_private display sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-4-jani.nikula@intel.com

drm/i915/display: move global_obj_list under display sub-struct

Move display global state member under drm_i915_private display
sub-struct.

Prefer adding anonymous sub-structs even for single members that aren't
our own structs.

Remove a nearby stale comment while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-3-jani.nikula@intel.com

drm/i915/display: move hti under display sub-struct

Move display hti/hdport related members under drm_i915_private display
sub-struct.

Prefer adding anonymous sub-structs even for single members that aren't
our own structs.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-2-jani.nikula@intel.com

drm/i915/hti: abstract hti handling

The HTI or HDPORT handling is sprinkled around. Centralize to one place.

Add a note about how subtle the mapping from HDPORT_STATE register to
dpll mask actually is.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-1-jani.nikula@intel.com

Merge tag 'gvt-next-2022-11-17' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-11-17

- kernel doc fixes
- remove vgpu->released sanity check
- small clean up

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117064106.GT30028@zhen-hp.sh.intel.com

drm/i915/edp: wait power off delay at driver remove to optimize probe

Panel power off delay is the time the panel power needs to remain off
after being switched off, before it can be switched on again.

For the purpose of respecting panel power off delay at driver probe,
assuming the panel was last switched off at driver probe is overly
pessimistic. If the panel was never on, we'd end up waiting for no
reason.

We don't know what has happened before kernel boot, but we can make some
assumptions:

- The panel may have been switched off right before kernel boot by some
  pre-os environment.

- After kernel boot, the panel may only be switched off by i915.

- At i915 driver probe, only a previously loaded and removed i915 may
  have switched the panel power off.

With these assumptions, we can initialize the last power off time to
kernel boot time, if we also ensure i915 driver remove waits for the
panel power off delay after switching panel power off.

This shaves off the time it takes from kernel boot to i915 probe from
the first panel enable, if (and only if) the panel was not already
enabled at boot.

The encoder destroy hook is pretty much the last place where we can
wait, right after we've ensured the panel power has been switched off,
and before the whole encoder is destroyed.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7417
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116150657.1347504-1-jani.nikula@intel.com

drm/i915/gvt: Remove the unused function get_pt_type()

The function get_pt_type is defined in the gtt.c file, but not
called elsewhere, so delete this unused function.

drivers/gpu/drm/i915/gvt/gtt.c:285:19: warning: unused function 'get_pt_type'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2277
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220926064044.53016-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221022061327.65275-1-wangjianli@cdjrlc.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: remove the vgpu->released and its sanity check

The life cycle of a vGPU, which is represented by a vfio_device, has been
managed by the VFIO core logic. Remove the vgpu->released, which was used
for a sanity check on the removal path of the vGPU instance. The sanity
check has already been covered in the VFIO core logic.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221104145652.1570-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

i915/gvt: remove hardcoded value on crc32_start calculation

struct gvt_firmware_header has a crc32 member in which all members that
come after the that field are used to calculate it. The previous
implementation added the value '4' (crc32's u32 size) to calculate the
crc32_start offset which came across as a bit cryptic until you take a
deeper look at the struct.

This patch changes crc32_start offset to the 'version' member which is
the first member of the struct gvt_firmware_header after crc32.

It's worth mentioning that doing a build before/after this patch results
in no binary output differences.

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221030033628.GA279284@mail.google.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: gvt: fix kernel-doc trivial warnings

Some functions seem to have been renamed without updating the kernel-doc
markup causing warnings. Also, struct intel_vgpu_dmabuf_obj is not
properly documented, but has a kerneld-doc markup.

Fix those warnings:
drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead
drivers/gpu/drm/i915/gvt/cfg_space.c:257: warning: expecting prototype for intel_vgpu_emulate_cfg_read(). Prototype was for intel_vgpu_emulate_cfg_write() instead
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'vgpu' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'info' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'dmabuf_id' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'kref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'initref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'list' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead
drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead
drivers/gpu/drm/i915/gvt/page_track.c:131: warning: expecting prototype for intel_vgpu_enable_page_track(). Prototype was for intel_vgpu_disable_page_track() instead
drivers/gpu/drm/i915/gvt/vgpu.c:215: warning: expecting prototype for intel_gvt_active_vgpu(). Prototype was for intel_gvt_activate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:230: warning: expecting prototype for intel_gvt_deactive_vgpu(). Prototype was for intel_gvt_deactivate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:358: warning: expecting prototype for intel_gvt_destroy_vgpu(). Prototype was for intel_gvt_destroy_idle_vgpu() instead

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/375c0c0ca2ef414f25e14f274457f77373a9268d.1657699522.git.mchehab@kernel.org
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"

There is a spelling mistake in a gvt_vgpu_err error message. Fix it.

Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: remove circ_buf.h includes

The last user of macros from that include was removed in 2018 by the
commit below.

Fixes: 6cc42152b02b ("drm/i915: Remove support for legacy debugfs crc interface")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115070302.4064-1-jirislaby@kernel.org

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/nouveau/disp: fix incorrect/broken hdmi methods

These are fixes from Lyude, and were meant to have been included in the
last round of drm-next patches.

- Fix some nasty memory issues that broke Lyude's display:
  - 0 initialize both nvif args and parsed HDMI infoframe buffers
  - Fixed missing memset(…, 0, …) for nvif args before sending VSI
    infoframe
  - Fixed incorrect data pointer and size in nvkm_uoutp_mthd_infoframe()
    (was previously pointing at the start of the nvif_outp_infoframe_args
    struct instead of at the start of the infoframe data
- Get rid of duplicated scdc assignments, since we only use it to write the
  scdc registers

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: stop including i915_irq.h from i915_trace.h

Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.

Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.

Also some places actually needed i915_irq.h too.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com

drm/i915: split out intel_display_reg_defs.h

Split out the display register helper macros to a separate file. For
now, include it from i915_reg.h, but note that there are already files
that don't need i915_reg.h, such as intel_audio.c.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3af47193ff5219b6d2cfe353b752ec4bb44de4f1.1668008071.git.jani.nikula@intel.com

drm/i915/reg: move pick even and pick to reg defs

This is a more logical place for generic helpers.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/623327aee73a515300d99c8d65552ca92f3f0721.1668008071.git.jani.nikula@intel.com

drm/i915/reg: move masked field helpers to i915_reg_defs.h

This is a more logical place for generic helpers.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5161a0c6d98df206c6c4c1add3fc3f2f408020b1.1668008071.git.jani.nikula@intel.com

drm/i915: Create resized LUTs for ivb+ split gamma mode

Currently when opeating in split gamma mode we do the
"skip ever other sw LUT entry" trick in the low level
LUT programming/readout functions. That is very annoying
and a big hinderance to revamping the color management
uapi.

Let's get rid of that problem by making half sized copies
of the software LUTs and plugging those into the internal
{pre,post}_csc_lut attachment points (instead of the sticking
the uapi provide sw LUTs there directly).

With this the low level stuff will operate purely in terms
the hardware LUT sizes, and all uapi nonsense is contained
to the atomic check phase. The one thing we do lose is
intel_color_assert_luts() since we no longer have a way to
check that the uapi LUTs were correctly used when generating
the internal copies. But that seems like a price worth paying.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-12-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915/display: move struct intel_link_m_n to intel_display_types.h

struct intel_crtc_state in intel_display_types.h actually needs the
struct intel_link_m_n definition, while intel_display.h only needs the
forward declaration.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ec10e4415cf84c51b7eb51092e81876da0bc902.1667383630.git.jani.nikula@intel.com

Merge branch '00.06-gr-ampere' of https://gitlab.freedesktop.org/skeggsb/nouveau into drm-next

This is the pull request for a whole bunch of fixes and prep-work that
was done to support Ampere acceleration prior to GSP-RM being
available.  It uses the ACR firmware released by NVIDIA in
linux-firmware, as we do on earlier GPUs.  The work to support running
on top of GSP-RM also heavily depends on various pieces of this
series.

In addition to the new HW support, general stability of the driver
should be improved, especially around recovering HW from bugs that can
be generated by userspace driver components.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==s+nZD0n7CuRWLPE=Pj+02CN13r+ZQJxoHQ_EmR+o=XQ@mail.gmail.com

drm/nouveau/gr/ga102: initial support

v2:
- whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/ltc/ga102: initial support

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/acr/ga102: initial support

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/fb/ga102: load and boot VPR scrubber FW

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/gr/tu102: remove gv100_grctx_unkn88c

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102: add gv100_gr_init_4188a4

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102-: fix support for sw_bundle64_init

We weren't sending the high bits, though they're zero currently anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102-: use sw_veid_bundle_init from firmware

NVIDIA provided this on Turing, but we kept using the hardcoded version
from Volta (where they didn't).

Switch to the firmware version prior to Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: drop a write from init_shader_exceptions()

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: move init_419bd8() after sw_ctx load

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: add NV_PGRAPH_PRI_PD_AB_DIST_CONFIG_1 to patch list

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: fix number of tile map registers

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: port smid mapping code from nvgpu

Essentially ripped verbatim from NVGPU, comments and all, and adapted to
nvkm's structs and style.

- maybe fixes an nvgpu bug though, a small tweak was needed to match RM

v2:
- remove unnecessary WARN_ON

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gp100-: modify init_fecs_exceptions

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gk20a,gm20b,gp10b: split out netlist parsing from fw loading

We'll want to reuse the former for loading from proper netlist images.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gp100-: fix number of zcull tile regs

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf117-: make ppc_nr[gpc] accurate

We're going to be pulling in a chunk of code from NVGPU to fixup our
SMID mappings on Volta and above, which depends on ppc_nr[gpc]
reflecting the actual number of PPCs present, not the maximum number.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: switch to newer style interrupt handler

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some init to init_exception2()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some init to init_rop_exceptions()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move reset during golden ctx init to fecs_reset()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: wfi after register-bashing golden init

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: gpfifo_ctl zero before init

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: wait for FE_PWR_MODE_AUTO

This doesn't fix any known issue, but RM started doing it at some point,
so presumably it's needed for something.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: call FECS HALT_PIPE method before RC reset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: call FECS WFI_GOLDEN_SAVE method

This won't work on Ampere, and, it's questionable whether we should have
been using our FW's method of storing the golden context image with NV's
firmware to begin with.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: stop using NV_PGRAPH_FECS_CTXSW_MAILBOX_CLEAR

This doesn't work on Ampere for some reason, switch to directly modifying
NV_PGRAPH_FECS_CTXSW_MAILBOX instead.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global attrib_cb actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support
- this is saving a *sizeable* amount of vram

v2:
- whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move misc context patching out of attrib_cb funcs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global bundle_cb actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global pagepool actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: generate golden context during first object alloc

Needed for GV100 (and only GV100 for some reason) for WFI_GOLDEN_SAVE.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some code around to make next commits nicer

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: expose function to read engine ctxsw status

Needed to support Ampere differences in gr/gf100-:

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/ltc: split color vs depth/stencil zbc counts

These differ on Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/engine: add HAL for engine-specific rc reset procedure

Will be used to improve gr reset on GF100 and newer.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: dump tracepc info on halt

- useful to distinguish between different issues.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/acr: use common falcon HS FW code for ACR FWs

Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.

- gv100 split from gp108 to handle FW exit status differences

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb/gp102-: unlock VPR right after devinit

Under memory load, instmem allocations could end up in the regions of
VRAM that are inaccessible right after boot, and be corrupted after a
suspend/resume cycle as a result of being restored before booting the
mem unlock firmware.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb: handle sysmem flush page from common code

- also executes pre-DEVINIT, so early boot is able to DMA sysmem

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)

Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.

ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).

The VPR scrubber code is fairly independent, and a good first target.

- adds better debug output to fw loading process, to ease bring-up/debug

v2:
- whitespace, 0->false

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: rework falcon reset

Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: switch to newer style interrupt handler

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: unload RTOS before tearing down WPR

Reset regs won't be available on Ampere while SEC2 RTOS is running, and
we're apparently supposed to be doing this on earlier GPUs too.

v2:
- fixed some excessive indentation

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu/gm20b,gp10b: boot RTOS from PMU init

Cleanup before falcon changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu: move init() falcon reset to non-nvfw code

Cleanup before falcon changes.

- fixes (attempt at?) reset of pmu while rtos is running, on gm20b

v2:
- remove extra whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu: move preinit() falcon reset to devinit

Cleanup before falcon changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gsp: add funcs

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo/ga100-: initial support

- replaces the hacked-up version that existed solely to support TTM

v2. remove earlier hack preventing use of non-stall intr for fences

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce/ga100-: initial support

- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: add new channel classes

Exposes a bunch of the new features that became possible as a result
of the earlier commits.  DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.

For the moment, this just crudely ports DRM to the API changes.

- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new engine object handling

Simplifies the GPU-specific code, completing the switch to newer HALs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new engine context handling

Builds on the context tracking that was added earlier.

- marks engine context PTEs as 'priv' where possible

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add RAMFC info to nvkm_chan_func

- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add USERD info to nvkm_chan_func

And use it to cleanup multiple implementations of almost the same thing.

- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add RAMIN info to nvkm_chan_func

Currently provided by {chan,dma,gpfifo}*.c, and those are going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add common runlist control

- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add common channel recovery

That sure was fun to untangle.

- handled per-runlist, rather than globally
- more straight-forward process in general
- various potential SW/HW races have been fixed
- fixes lockdep issues that were present in >=gk104's prior implementation
- volta recovery now actually stands a chance of working
- volta/turing waiting for PBDMA idle before engine reset
- turing using hw-provided TSG info for CTXSW_TIMEOUT

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: kill channel on NV_PPBDMA_INTR_1_CTXNOTVALID

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: kill channel on a selection of PBDMA errors

A bunch of these can be handled in such a way that the channel can
continue, however, any of these are a pretty decent sign something
has gone horribly wrong, and the safest option is to disable the
channel.

This is a bit of a hack, we will want to handle these individually
and dump relevant debug info for each at some point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add chan/cgrp preempt()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add chan start()/stop()

- nvkm_chan_error() built on top, stops channel and sends 'killed' event
- removes an odd double-bashing of channel enable regs on kepler and up
- pokes doorbell on turing and up, after enabling channel

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add chan bind()/unbind()

- stops programming (non-existent) runl id field on bind(), from maxwell

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add runlist block()/allow()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add runlist wait()

- adds g8x/turing registers, which were missing before
- switches fermi to polled wait, like later hw (see: 4f2fc25c0f8bc...)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new engine context tracking

Channel groups have somewhat more complicated requirements than what we
currently support.  An engine context is shared between all channels in
a channel group, VEID/subctx support (later) brings per-VEID components,
and we need to track an individual channel's engine context pointers.

This commit adds the structures and refcounting to support the above,
wrapping the prior implementation for the moment.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new channel lookup interfaces

- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock

v2:
- remove unnecessary parenthesis

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: merge mmu fault handlers together

After updating GF100 implementation from the GK104/TU102 ones, and using
the new runlist/engine topology info, all three handlers become (almost)
identical.

- there's a temporary kludge to call through to the HW-specific recovery
- engine fault mapping info determined at load time, not on every fault

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: move PBDMA intr to runq

- merges gf100/gk104- NV_PFIFO_INTR_0_PBDMA and NV_PPBDMA_INTR_0 code

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: move PBDMA init to runq

- bumps pbdma timeout to value RM uses on newer HW
- bumps fb timeout to max from boot default
- one/both of these greatly improves stability on // piglit runs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: program NV_PFIFO_FB_TIMEOUT on init

NVGPU and RM both program this value.

Fixes a bunch of random hangs running parallel piglit.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>