git.monstr.eu Git - linux-2.6-microblaze.git/log

Merge tag 'mlx5-fixes-2017-11-08' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2017-11-08

The following series includes some fixes for mlx5 core and etherent
driver.

Sorry for the late submission but as you can see i have some very
critical fixes below that i would like them merged into this RC.

Please pull and let me know if there is any problem.

For -stable:
('net/mlx5e: Set page to null in case dma mapping fails') kernels >= 4.13
('net/mlx5: FPGA, return -EINVAL if size is zero') kernels >= 4.13
('net/mlx5: Cancel health poll before sending panic teardown command') kernels >= 4.13

V1->V2:
- Fix Reviewed-by tag of the 2nd patch.
- Drop the FPGA 0 size fix, it needs some more change log info.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

vlan: fix a use-after-free in vlan_device_event()

After refcnt reaches zero, vlan_vid_del() could free
dev->vlan_info via RCU:

RCU_INIT_POINTER(dev->vlan_info, NULL);
call_rcu(&vlan_info->rcu, vlan_info_rcu_free);

However, the pointer 'grp' still points to that memory
since it is set before vlan_vid_del():

        vlan_info = rtnl_dereference(dev->vlan_info);
        if (!vlan_info)
                goto out;
        grp = &vlan_info->grp;

Depends on when that RCU callback is scheduled, we could
trigger a use-after-free in vlan_group_for_each_dev()
right following this vlan_vid_del().

Fix it by moving vlan_vid_del() before setting grp. This
is also symmetric to the vlan_vid_add() we call in
vlan_device_event().

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct")
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: return after vlan prepare phase

The current code does not return after successfully preparing the VLAN
addition on every ports member of a it. Fix this.

Fixes: 1ca4aa9cd4cc ("net: dsa: check VLAN capability of every switch")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: return after mdb prepare phase

The current code does not return after successfully preparing the MDB
addition on every ports member of a multicast group. Fix this.

Fixes: a1a6b7ea7f2d ("net: dsa: add cross-chip multicast support")
Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix tcp_fastretrans_alert warning

This patch fixes the cause of an WARNING indicatng TCP has pending
retransmission in Open state in tcp_fastretrans_alert().

The root cause is a bad interaction between path mtu probing,
if enabled, and the RACK loss detection. Upong receiving a SACK
above the sequence of the MTU probing packet, RACK could mark the
probe packet lost in tcp_fastretrans_alert(), prior to calling
tcp_simple_retransmit().

tcp_simple_retransmit() only enters Loss state if it newly marks
the probe packet lost. If the probe packet is already identified as
lost by RACK, the sender remains in Open state with some packets
marked lost and retransmitted. Then the next SACK would trigger
the warning. The likely scenario is that the probe packet was
lost due to its size or network congestion. The actual impact of
this warning is small by potentially entering fast recovery an
ACK later.

The simple fix is always entering recovery (Loss) state if some
packet is marked lost during path MTU probing.

Fixes: a0370b3f3f2c ("tcp: enable RACK loss detection to trigger recovery")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: gso: avoid refcount_t warning from tcp_gso_segment()

When a GSO skb of truesize O is segmented into 2 new skbs of truesize N1
and N2, we want to transfer socket ownership to the new fresh skbs.

In order to avoid expensive atomic operations on a cache line subject to
cache bouncing, we replace the sequence :

refcount_add(N1, &sk->sk_wmem_alloc);
refcount_add(N2, &sk->sk_wmem_alloc); // repeated by number of segments

refcount_sub(O, &sk->sk_wmem_alloc);

by a single

refcount_add(sum_of(N) - O, &sk->sk_wmem_alloc);

Problem is :

In some pathological cases, sum(N) - O might be a negative number, and
syzkaller bot was apparently able to trigger this trace [1]

atomic_t was ok with this construct, but we need to take care of the
negative delta with refcount_t

[1]
refcount_t: saturated; leaking memory.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8404 at lib/refcount.c:77 refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
Kernel panic - not syncing: panic_on_warn set ...

CPU: 0 PID: 8404 Comm: syz-executor2 Not tainted 4.14.0-rc5-mm1+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1c4/0x1e0 kernel/panic.c:546
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177
do_trap_no_signal arch/x86/kernel/traps.c:211 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:260
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310
invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905
RIP: 0010:refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
RSP: 0018:ffff8801c606e3a0 EFLAGS: 00010282
RAX: 0000000000000026 RBX: 0000000000001401 RCX: 0000000000000000
RDX: 0000000000000026 RSI: ffffc900036fc000 RDI: ffffed0038c0dc68
RBP: ffff8801c606e430 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8801d97f5eba R11: 0000000000000000 R12: ffff8801d5acf73c
R13: 1ffff10038c0dc75 R14: 00000000ffffffff R15: 00000000fffff72f
refcount_add+0x1b/0x60 lib/refcount.c:101
tcp_gso_segment+0x10d0/0x16b0 net/ipv4/tcp_offload.c:155
tcp4_gso_segment+0xd4/0x310 net/ipv4/tcp_offload.c:51
inet_gso_segment+0x60c/0x11c0 net/ipv4/af_inet.c:1271
skb_mac_gso_segment+0x33f/0x660 net/core/dev.c:2749
__skb_gso_segment+0x35f/0x7f0 net/core/dev.c:2821
skb_gso_segment include/linux/netdevice.h:3971 [inline]
validate_xmit_skb+0x4ba/0xb20 net/core/dev.c:3074
__dev_queue_xmit+0xe49/0x2070 net/core/dev.c:3497
dev_queue_xmit+0x17/0x20 net/core/dev.c:3538
neigh_hh_output include/net/neighbour.h:471 [inline]
neigh_output include/net/neighbour.h:479 [inline]
ip_finish_output2+0xece/0x1460 net/ipv4/ip_output.c:229
ip_finish_output+0x85e/0xd10 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:238 [inline]
ip_output+0x1cc/0x860 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:459 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x8c6/0x18e0 net/ipv4/ip_output.c:504
tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1137
tcp_write_xmit+0x663/0x4de0 net/ipv4/tcp_output.c:2341
__tcp_push_pending_frames+0xa0/0x250 net/ipv4/tcp_output.c:2513
tcp_push_pending_frames include/net/tcp.h:1722 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5050 [inline]
tcp_rcv_established+0x8c7/0x18a0 net/ipv4/tcp_input.c:5497
tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1460
sk_backlog_rcv include/net/sock.h:909 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2264
release_sock+0xa4/0x2a0 net/core/sock.c:2776
tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
sock_sendmsg_nosec net/socket.c:632 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:642
___sys_sendmsg+0x31c/0x890 net/socket.c:2048
__sys_sendmmsg+0x1e6/0x5f0 net/socket.c:2138

Fixes: 14afee4b6092 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs

This is to prevent the case of working with a single MPWQE
(1 WQE is always reserved as RQ is linked-list).
When the WQE is fully consumed, HW should still have available buffer
in order not to drop packets.

Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Set page to null in case dma mapping fails

Currently, when dma mapping fails, put_page is called,
but the page is not set to null. Later, in the page_reuse treatment in
mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time,
improperly doing dma_unmap (for a non-mapped address) and an extra put_page.
Prevent this by nullifying the page pointer when dma_map fails.

Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix napi poll with zero budget

napi->poll can be called with budget 0, e.g. in netpoll scenarios
where the caller only wants to poll TX rings
(poll_one_napi@net/core/netpoll.c).

The below commit changed RX polling from "while" loop to "do {} while",
which caused to ignore the initial budget and handle at least one RX
packet.

This fixes the following warning:
[ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll
[ 2852.049195] ------------[ cut here ]------------
[ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0

Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Cancel health poll before sending panic teardown command

After the panic teardown firmware command, health_care detects the error
in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is
no longer needed because the panic teardown firmware command will bring
down the PCI bus communication with the HCA.

The solution is to cancel the health care timer and its pending
workqueue request before sending panic teardown firmware command.

Kernel trace:
mlx5_core 0033:01:00.0: Shutdown was called
mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here
mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1
mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called
mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start
mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0
mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end
Unable to handle kernel paging request for data at address 0x0000003f
Faulting instruction address: 0xc0080000434b8c80

Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow')
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Loop over temp list to release delay events

list_splice_init initializing waiting_events_list after splicing it to
temp list, therefore we should loop over temp list to fire the events.

Fixes: 4ca637a20a52 ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

rds: ib: Fix NULL pointer dereference in debug code

rds_ib_recv_refill() is a function that refills an IB receive
queue. It can be called from both the CQE handler (tasklet) and a
worker thread.

Just after the call to ib_post_recv(), a debug message is printed with
rdsdebug():

            ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr);
            rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv,
                     recv->r_ibinc, sg_page(&recv->r_frag->f_sg),
                     (long) ib_sg_dma_address(
                            ic->i_cm_id->device,
                            &recv->r_frag->f_sg),
                    ret);

Now consider an invocation of rds_ib_recv_refill() from the worker
thread, which is preemptible. Further, assume that the worker thread
is preempted between the ib_post_recv() and rdsdebug() statements.

Then, if the preemption is due to a receive CQE event, the
rds_ib_recv_cqe_handler() will be invoked. This function processes
receive completions, including freeing up data structures, such as the
recv->r_frag.

In this scenario, rds_ib_recv_cqe_handler() will process the receive
WR posted above. That implies, that the recv->r_frag has been freed
before the above rdsdebug() statement has been executed. When it is
later executed, we will have a NULL pointer dereference:

[ 4088.068008] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 4088.076754] IP: rds_ib_recv_refill+0x87/0x620 [rds_rdma]
[ 4088.082686] PGD 0 P4D 0
[ 4088.085515] Oops: 0000 [#1] SMP
[ 4088.089015] Modules linked in: rds_rdma(OE) rds(OE) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) mlx4_ib(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) rdma_cm(E) ib_cm(E) iw_cm(E) ib_core(E) binfmt_misc(E) sb_edac(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) crypto_simd(E) iTCO_wdt(E) glue_helper(E) iTCO_vendor_support(E) sg(E) cryptd(E) pcspkr(E) ipmi_si(E) ipmi_devintf(E) ipmi_msghandler(E) shpchp(E) ioatdma(E) i2c_i801(E) wmi(E) lpc_ich(E) mei_me(E) mei(E) mfd_core(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ip_tables(E) ext4(E) mbcache(E) jbd2(E) fscrypto(E) mgag200(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E)
[ 4088.168486]  fb_sys_fops(E) ahci(E) ixgbe(E) libahci(E) ttm(E) mdio(E) ptp(E) pps_core(E) drm(E) sd_mod(E) libata(E) crc32c_intel(E) mlx4_core(E) i2c_core(E) dca(E) megaraid_sas(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) [last unloaded: rds]
[ 4088.193442] CPU: 20 PID: 1244 Comm: kworker/20:2 Tainted: G           OE   4.14.0-rc7.master.20171105.ol7.x86_64 #1
[ 4088.205097] Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017
[ 4088.216074] Workqueue: ib_cm cm_work_handler [ib_cm]
[ 4088.221614] task: ffff885fa11d0000 task.stack: ffffc9000e598000
[ 4088.228224] RIP: 0010:rds_ib_recv_refill+0x87/0x620 [rds_rdma]
[ 4088.234736] RSP: 0018:ffffc9000e59bb68 EFLAGS: 00010286
[ 4088.240568] RAX: 0000000000000000 RBX: ffffc9002115d050 RCX: ffffc9002115d050
[ 4088.248535] RDX: ffffffffa0521380 RSI: ffffffffa0522158 RDI: ffffffffa0525580
[ 4088.256498] RBP: ffffc9000e59bbf8 R08: 0000000000000005 R09: 0000000000000000
[ 4088.264465] R10: 0000000000000339 R11: 0000000000000001 R12: 0000000000000000
[ 4088.272433] R13: ffff885f8c9d8000 R14: ffffffff81a0a060 R15: ffff884676268000
[ 4088.280397] FS:  0000000000000000(0000) GS:ffff885fbec80000(0000) knlGS:0000000000000000
[ 4088.289434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4088.295846] CR2: 0000000000000020 CR3: 0000000001e09005 CR4: 00000000001606e0
[ 4088.303816] Call Trace:
[ 4088.306557]  rds_ib_cm_connect_complete+0xe0/0x220 [rds_rdma]
[ 4088.312982]  ? __dynamic_pr_debug+0x8c/0xb0
[ 4088.317664]  ? __queue_work+0x142/0x3c0
[ 4088.321944]  rds_rdma_cm_event_handler+0x19e/0x250 [rds_rdma]
[ 4088.328370]  cma_ib_handler+0xcd/0x280 [rdma_cm]
[ 4088.333522]  cm_process_work+0x25/0x120 [ib_cm]
[ 4088.338580]  cm_work_handler+0xd6b/0x17aa [ib_cm]
[ 4088.343832]  process_one_work+0x149/0x360
[ 4088.348307]  worker_thread+0x4d/0x3e0
[ 4088.352397]  kthread+0x109/0x140
[ 4088.355996]  ? rescuer_thread+0x380/0x380
[ 4088.360467]  ? kthread_park+0x60/0x60
[ 4088.364563]  ret_from_fork+0x25/0x30
[ 4088.368548] Code: 48 89 45 90 48 89 45 98 eb 4d 0f 1f 44 00 00 48 8b 43 08 48 89 d9 48 c7 c2 80 13 52 a0 48 c7 c6 58 21 52 a0 48 c7 c7 80 55 52 a0 <4c> 8b 48 20 44 89 64 24 08 48 8b 40 30 49 83 e1 fc 48 89 04 24
[ 4088.389612] RIP: rds_ib_recv_refill+0x87/0x620 [rds_rdma] RSP: ffffc9000e59bb68
[ 4088.397772] CR2: 0000000000000020
[ 4088.401505] ---[ end trace fe922e6ccf004431 ]---

This bug was provoked by compiling rds out-of-tree with
EXTRA_CFLAGS="-DRDS_DEBUG -DDEBUG" and inserting an artificial delay
between the rdsdebug() and ib_ib_port_recv() statements:

           /* XXX when can this fail? */
       ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr);
+ if (can_wait)
+ usleep_range(1000, 5000);
       rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv,
recv->r_ibinc, sg_page(&recv->r_frag->f_sg),
(long) ib_sg_dma_address(

The fix is simply to move the rdsdebug() statement up before the
ib_post_recv() and remove the printing of ret, which is taken care of
anyway by the non-debug code.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'pm-final-4.14' of git://git./linux/kernel/git/rafael/linux-pm

Pull final power management fixes from Rafael Wysocki:
"These fix a regression in the schedutil cpufreq governor introduced by
  a recent change and blacklist Dell XPS13 9360 from using the Low Power
  S0 Idle _DSM interface which triggers serious problems on one of these
  machines.

  Specifics:

   - Prevent the schedutil cpufreq governor from using the utilization
     of a wrong CPU in some cases which started to happen after one of
     the recent changes in it (Chris Redpath).

   - Blacklist Dell XPS13 9360 from using the Low Power S0 Idle _DSM
     interface as that causes serious issue (related to NVMe) to appear
     on one of these machines, even though the other Dells XPS13 9360 in
     somewhat different HW configurations behave correctly (Rafael
     Wysocki)"

* tag 'pm-final-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360
  cpufreq: schedutil: Examine the correct CPU when we update util

Merge tag 'sound-4.14' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"The amount of the changes isn't as quite small as wished, nevertheless
  they are straight fixes that deserve merging to 4.14 final.

  Most of fixes are about ALSA core bugs spotted by fuzzer: a follow-up
  fix for the previous nested rwsem patch, a fix to avoid the resource
  hogs due to too many concurrent ALSA timer invocations, and a fix for
  a crash with SYSEX MIDI transfer over OSS sequencer emulation that is
  used by none but fuzzer.

  The rest are usual HD-audio and USB-audio device-specific quirks,
  which are safe to apply"

* tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic problem for Dell machines with alc274
  ALSA: seq: Fix OSS sysex delivery in OSS emulation
  ALSA: seq: Avoid invalid lockdep class warning
  ALSA: timer: Limit max instances per timer
  ALSA: usb-audio: support new Amanero Combo384 firmware version

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix use-after-free in IPSEC input parsing, desintation address
    pointer was loaded before pskb_may_pull() which can change the SKB
    data pointers. From Florian Westphal.

2) Stack out-of-bounds read in xfrm_state_find(), from Steffen
    Klassert.

3) IPVS state of SKB is not properly reset when moving between
    namespaces, from Ye Yin.

4) Fix crash in asix driver suspend and resume, from Andrey Konovalov.

5) Don't deliver ipv6 l2tp tunnel packets to ipv4 l2tp tunnels, and
    vice versa, from Guillaume Nault.

6) Fix DSACK undo on non-dup ACKs, from Priyaranjan Jha.

7) Fix regression in bond_xmit_hash()'s behavior after the TCP port
    selection changes back in 4.2, from Hangbin Liu.

8) Two divide by zero bugs in USB networking drivers when parsing
    descriptors, from Bjorn Mork.

9) Fix bonding slaves being stuck in BOND_LINK_FAIL state, from Jay
    Vosburgh.

10) Missing skb_reset_mac_header() in qmi_wwan, from Kristian Evensen.

11) Fix the destruction of tc action object races properly, from Cong
    Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits)
  cls_u32: use tcf_exts_get_net() before call_rcu()
  cls_tcindex: use tcf_exts_get_net() before call_rcu()
  cls_rsvp: use tcf_exts_get_net() before call_rcu()
  cls_route: use tcf_exts_get_net() before call_rcu()
  cls_matchall: use tcf_exts_get_net() before call_rcu()
  cls_fw: use tcf_exts_get_net() before call_rcu()
  cls_flower: use tcf_exts_get_net() before call_rcu()
  cls_flow: use tcf_exts_get_net() before call_rcu()
  cls_cgroup: use tcf_exts_get_net() before call_rcu()
  cls_bpf: use tcf_exts_get_net() before call_rcu()
  cls_basic: use tcf_exts_get_net() before call_rcu()
  net_sched: introduce tcf_exts_get_net() and tcf_exts_put_net()
  Revert "net_sched: hold netns refcnt for each action"
  net: usb: asix: fill null-ptr-deref in asix_suspend
  Revert "net: usb: asix: fill null-ptr-deref in asix_suspend"
  qmi_wwan: Add missing skb_reset_mac_header-call
  bonding: fix slave stuck in BOND_LINK_FAIL state
  qrtr: Move to postcore_initcall
  net: qmi_wwan: fix divide by 0 on bad descriptors
  net: cdc_ether: fix divide by 0 on bad descriptors
  ...

ALSA: hda - fix headset mic problem for Dell machines with alc274

Confirmed with Kailang of Realtek, the pin 0x19 is for Headset Mic, and
the pin 0x1a is for Headphone Mic, he suggested to apply
ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix this problem. And we
verified applying this FIXUP can fix this problem.

Cc: <stable@vger.kernel.org>
Cc: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2017-11-09

1) Fix a use after free due to a reallocated skb head.
   From Florian Westphal.

2) Fix sporadic lookup failures on labeled IPSEC.
   From Florian Westphal.

3) Fix a stack out of bounds when a socket policy is applied
   to an IPv6 socket that sends IPv4 packets.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-sched-race-fix'

Cong Wang says:

====================
net_sched: close the race between call_rcu() and cleanup_net()

This patchset tries to fix the race between call_rcu() and
cleanup_net() again. Without holding the netns refcnt the
tc_action_net_exit() in netns workqueue could be called before
filter destroy works in tc filter workqueue. This patchset
moves the netns refcnt from tc actions to tcf_exts, without
breaking per-netns tc actions.

Patch 1 reverts the previous fix, patch 2 introduces two new
API's to help to address the bug and the rest patches switch
to the new API's. Please see each patch for details.

I was not able to reproduce this bug, but now after adding
some delay in filter destroy work I manage to trigger the
crash. After this patchset, the crash is not reproducible
any more and the debugging printk's show the order is expected
too.
====================

Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions")
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_u32: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_tcindex: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_rsvp: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_route: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_matchall: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_fw: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_flower: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_flow: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_cgroup: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_bpf: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_basic: use tcf_exts_get_net() before call_rcu()

Hold netns refcnt before call_rcu() and release it after
the tcf_exts_destroy() is done.

Note, on ->destroy() path we have to respect the return value
of tcf_exts_get_net(), on other paths it should always return
true, so we don't need to care.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: introduce tcf_exts_get_net() and tcf_exts_put_net()

Instead of holding netns refcnt in tc actions, we can minimize
the holding time by saving it in struct tcf_exts instead. This
means we can just hold netns refcnt right before call_rcu() and
release it after tcf_exts_destroy() is done.

However, because on netns cleanup path we call tcf_proto_destroy()
too, obviously we can not hold netns for a zero refcnt, in this
case we have to do cleanup synchronously. It is fine for RCU too,
the caller cleanup_net() already waits for a grace period.

For other cases, refcnt is non-zero and we can safely grab it as
normal and release it after we are done.

This patch provides two new API for each filter to use:
tcf_exts_get_net() and tcf_exts_put_net(). And all filters now can
use the following pattern:

void __destroy_filter() {
  tcf_exts_destroy();
  tcf_exts_put_net();  // <== release netns refcnt
  kfree();
}
void some_work() {
  rtnl_lock();
  __destroy_filter();
  rtnl_unlock();
}
void some_rcu_callback() {
  tcf_queue_work(some_work);
}

if (tcf_exts_get_net())  // <== hold netns refcnt
  call_rcu(some_rcu_callback);
else
  __destroy_filter();

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net_sched: hold netns refcnt for each action"

This reverts commit ceffcc5e254b450e6159f173e4538215cebf1b59.
If we hold that refcnt, the netns can never be destroyed until
all actions are destroyed by user, this breaks our netns design
which we expect all actions are destroyed when we destroy the
whole netns.

Cc: Lucas Bates <lucasb@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: fill null-ptr-deref in asix_suspend

When asix_suspend() is called dev->driver_priv might not have been
assigned a value, so we need to check that it's not NULL.

Similar issue is present in asix_resume(), this patch fixes it as well.

Found by syzkaller.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006bb36300 task.stack: ffff88006bba8000
RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629
RSP: 0018:ffff88006bbae718 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644
RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008
RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40
R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80
FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0
Call Trace:
usb_suspend_interface drivers/usb/core/driver.c:1209
usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314
usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852
__rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334
rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461
rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596
__pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009
pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251
usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487
hub_port_connect drivers/usb/core/hub.c:4903
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x3a1/0x470 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00
00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80>
3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c
RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718
---[ end trace dfc4f5649284342c ]---

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: usb: asix: fill null-ptr-deref in asix_suspend"

This reverts commit baedf68a068ca29624f241426843635920f16e1d.

There is an updated version of this fix which covers
the problem more thoroughly.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'pm-cpufreq-sched'

* pm-cpufreq-sched:
cpufreq: schedutil: Examine the correct CPU when we update util

x86/mm: Unbreak modules that rely on external PAGE_KERNEL availability

Commit 7744ccdbc16f0 ("x86/mm: Add Secure Memory Encryption (SME)
support") as a side-effect made PAGE_KERNEL all of a sudden unavailable
to modules which can't make use of EXPORT_SYMBOL_GPL() symbols.

This is because once SME is enabled, sme_me_mask (which is introduced as
EXPORT_SYMBOL_GPL) makes its way to PAGE_KERNEL through _PAGE_ENC,
causing imminent build failure for all the modules which make use of all
the EXPORT-SYMBOL()-exported API (such as vmap(), __vmalloc(),
remap_pfn_range(), ...).

Exporting (as EXPORT_SYMBOL()) interfaces (and having done so for ages)
that take pgprot_t argument, while making it impossible to -- all of a
sudden -- pass PAGE_KERNEL to it, feels rather incosistent.

Restore the original behavior and make it possible to pass PAGE_KERNEL
to all its EXPORT_SYMBOL() consumers.

[ This is all so not wonderful. We shouldn't need that "sme_me_mask"
  access at all in all those places that really don't care about that
  level of detail, and just want _PAGE_KERNEL or whatever.

  We have some similar issues with _PAGE_CACHE_WP and _PAGE_NOCACHE,
  both of which hide a "cachemode2protval()" call, and which also ends
  up using another EXPORT_SYMBOL(), but at least that only triggers for
  the much more rare cases.

  Maybe we could move these dynamic page table bits to be generated much
  deeper down in the VM layer, instead of hiding them in the macros that
  everybody uses.

  So this all would merit some cleanup. But not today.   - Linus ]

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Despised-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'fixes-v4.14-rc8' of git://git./linux/kernel/git/jmorris/linux-security

Pull key handling fix from James Morris:
"Fix by Eric Biggers for the keys subsystem"

* 'fixes-v4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]

apparmor: fix off-by-one comparison on MAXMAPPED_SIG

This came in yesterday, and I have verified our regression tests
were missing this and it can cause an oops. Please apply.

There is a an off-by-one comparision on sig against MAXMAPPED_SIG
that can lead to a read outside the sig_map array if sig
is MAXMAPPED_SIG. Fix this.

Verified that the check is an out of bounds case that can cause an oops.

Revised: add comparison fix to second case
Fixes: cd1dbf76b23d ("apparmor: add the ability to mediate signals")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]

syzkaller reported a NULL pointer dereference in asn1_ber_decoder().  It
can be reproduced by the following command, assuming
CONFIG_PKCS7_TEST_KEY=y:

        keyctl add pkcs7_test desc '' @s

The bug is that if the data buffer is empty, an integer underflow occurs
in the following check:

        if (unlikely(dp >= datalen - 1))
                goto data_overrun_error;

This results in the NULL data pointer being dereferenced.

Fix it by checking for 'datalen - dp < 2' instead.

Also fix the similar check for 'dp >= datalen - n' later in the same
function.  That one possibly could result in a buffer overread.

The NULL pointer dereference was reproducible using the "pkcs7_test" key
type but not the "asymmetric" key type because the "asymmetric" key type
checks for a 0-length payload before calling into the ASN.1 decoder but
the "pkcs7_test" key type does not.

The bug report was:

    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0
    Oops: 0000 [#1] SMP
    Modules linked in:
    CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
    task: ffff9b6b3798c040 task.stack: ffff9b6b37970000
    RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c
    RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0
    RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
    R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
    FS:  00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0
    Call Trace:
     pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139
     verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216
     pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63
     key_create_or_update+0x180/0x530 security/keys/key.c:855
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x4585c9
    RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9
    RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000
    RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae
    R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000
    Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff
    RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78
    CR2: 0000000000000000

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

qmi_wwan: Add missing skb_reset_mac_header-call

When we receive a packet on a QMI device in raw IP mode, we should call
skb_reset_mac_header() to ensure that skb->mac_header contains a valid
offset in the packet. While it shouldn't really matter, the packets have
no MAC header and the interface is configured as-such, it seems certain
parts of the network stack expects a "good" value in skb->mac_header.

Without the skb_reset_mac_header() call added in this patch, for example
shaping traffic (using tc) triggers the following oops on the first
received packet:

[  303.642957] skbuff: skb_under_panic: text:8f137918 len:177 put:67 head:8e4b0f00 data:8e4b0eff tail:0x8e4b0fb0 end:0x8e4b1520 dev:wwan0
[  303.655045] Kernel bug detected[#1]:
[  303.658622] CPU: 1 PID: 1002 Comm: logd Not tainted 4.9.58 #0
[  303.664339] task: 8fdf05e0 task.stack: 8f15c000
[  303.668844] $ 0   : 00000000 00000001 0000007a 00000000
[  303.674062] $ 4   : 8149a2fc 8149a2fc 8149ce20 00000000
[  303.679284] $ 8   : 00000030 3878303a 31623465 20303235
[  303.684510] $12   : ded731e3 2626a277 00000000 03bd0000
[  303.689747] $16   : 8ef62b40 00000043 8f137918 804db5fc
[  303.694978] $20   : 00000001 00000004 8fc13800 00000003
[  303.700215] $24   : 00000001 8024ab10
[  303.705442] $28   : 8f15c000 8fc19cf0 00000043 802cc920
[  303.710664] Hi    : 00000000
[  303.713533] Lo    : 74e58000
[  303.716436] epc   : 802cc920 skb_panic+0x58/0x5c
[  303.721046] ra    : 802cc920 skb_panic+0x58/0x5c
[  303.725639] Status: 11007c03 KERNEL EXL IE
[  303.729823] Cause : 50800024 (ExcCode 09)
[  303.733817] PrId  : 0001992f (MIPS 1004Kc)
[  303.737892] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2i
Process logd (pid: 1002, threadinfo=8f15c000, task=8fdf05e0, tls=77b3eee4)
[  303.962509] Stack : 00000000 80408990 8f137918 000000b1 00000043 8e4b0f00 8e4b0eff 8e4b0fb0
[  303.970871]         8e4b1520 8fec1800 00000043 802cd2a4 6e000045 00000043 00000000 8ef62000
[  303.979219]         8eef5d00 8ef62b40 8fea7300 8f137918 00000000 00000000 0002bb01 793e5664
[  303.987568]         8ef08884 00000001 8fea7300 00000002 8fc19e80 8eef5d00 00000006 00000003
[  303.995934]         00000000 8030ba90 00000003 77ab3fd0 8149dc80 8004d1bc 8f15c000 8f383700
[  304.004324]         ...
[  304.006767] Call Trace:
[  304.009241] [<802cc920>] skb_panic+0x58/0x5c
[  304.013504] [<802cd2a4>] skb_push+0x78/0x90
[  304.017783] [<8f137918>] 0x8f137918
[  304.021269] Code: 00602825  0c02a3b4  24842888 <000c000d> 8c870060  8c8200a0  0007382b  00070336  8c88005c
[  304.031034]
[  304.032805] ---[ end trace b778c482b3f0bda9 ]---
[  304.041384] Kernel panic - not syncing: Fatal exception in interrupt
[  304.051975] Rebooting in 3 seconds..

While the oops is for a 4.9-kernel, I was able to trigger the same oops with
net-next as of yesterday.

Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: fix slave stuck in BOND_LINK_FAIL state

The bonding miimon logic has a flaw, in that a failure of the
rtnl_trylock can cause a slave to become permanently stuck in
BOND_LINK_FAIL state.

The sequence of events to cause this is as follows:

1) bond_miimon_inspect finds that a slave's link is down, and so
calls bond_propose_link_state, setting slave->new_link_state to
BOND_LINK_FAIL, then sets slave->new_link to BOND_LINK_DOWN and returns
non-zero.

2) In bond_mii_monitor, the rtnl_trylock fails, and the timer is
rescheduled.  No change is committed.

3) bond_miimon_inspect is called again, but this time the slave
from step 1 has recovered.  slave->new_link is reset to NOCHANGE, and, as
slave->link was never changed, the switch enters the BOND_LINK_UP case,
and does nothing.  The pending BOND_LINK_FAIL state from step 1 remains
pending, as new_link_state is not reset.

4) The state from step 3 persists until another slave changes link
state and causes bond_miimon_inspect to return non-zero.  At this point,
the BOND_LINK_FAIL state change on the slave from steps 1-3 is committed,
and the slave will remain stuck in BOND_LINK_FAIL state even though it
is actually link up.

The remedy for this is to initialize new_link_state on each entry
to bond_miimon_inspect, as is already done with new_link.

Fixes: fb9eb899a6dc ("bonding: handle link transition from FAIL to UP correctly")
Reported-by: Alex Sidorenko <alexandre.sidorenko@hpe.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qrtr: Move to postcore_initcall

Registering qrtr with module_init makes the ability of typical platform
code to create AF_QIPCRTR socket during probe a matter of link order
luck. Moving qrtr to postcore_initcall() avoids this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qmi_wwan: fix divide by 0 on bad descriptors

A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will
cause a divide error in usbnet_probe:

divide error: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006bef5c00 task.stack: ffff88006bf60000
RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355
RSP: 0018:ffff88006bf67508 EFLAGS: 00010246
RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34
RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34
RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881
R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003
R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0
Call Trace:
usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783
qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338
usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361
really_probe drivers/base/dd.c:413
driver_probe_device+0x522/0x740 drivers/base/dd.c:557

Fix by simply ignoring the bogus descriptor, as it is optional
for QMI devices anyway.

Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cdc_ether: fix divide by 0 on bad descriptors

Setting dev->hard_mtu to 0 will cause a divide error in
usbnet_probe. Protect against devices with bogus CDC Ethernet
functional descriptors by ignoring a zero wMaxSegmentSize.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: discard lowest hash bit for 802.3ad layer3+4

After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range
in connect()"), we will try to use even ports for connect(). Then if an
application (seen clearly with iperf) opens multiple streams to the same
destination IP and port, each stream will be given an even source port.

So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing
will always hash all these streams to the same interface. And the total
throughput will limited to a single slave.

Change the tcp code will impact the whole tcp behavior, only for bonding
usage. Paolo Abeni suggested fix this by changing the bonding code only,
which should be more reasonable, and less impact.

Fix this by discarding the lowest hash bit because it contains little entropy.
After the fix we can re-balance between slaves.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e/core/en_fs: fix pointer dereference after free in mlx5e_execute_l2_action

hn is being kfree'd in mlx5e_del_l2_from_hash and then dereferenced
by accessing hn->ai.addr

Fix this by copying the MAC address into a local variable for its safe use
in all possible execution paths within function mlx5e_execute_l2_action.

Addresses-Coverity-ID: 1417789
Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: Prevent userspace from changing TX affinities

The mvpp2 driver can't cope at all with the TX affinities being
changed from userspace, and spit an endless stream of

[   91.779920] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing
[   91.779930] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing
[   91.780402] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing
[   91.780406] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing
[   91.780415] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing
[   91.780418] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing

rendering the box completely useless (I've measured around 600k
interrupts/s on a 8040 box) once irqbalance kicks in and start
doing its job.

Obviously, the driver was never designed with this in mind. So let's
work around the problem by preventing userspace from interacting
with these interrupts altogether.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ide-cd: Handle missing driver data during status check gracefully

The 0day bot reports the below failure which happens occasionally, with
their randconfig testing (once every ~100 boots).  The Code points at
the private pointer ->driver_data being NULL, which hints at a race of
sorts where the private driver_data descriptor has disappeared by the
time we get to run the workqueue.

So let's check that pointer before we continue with issuing the command
to the drive.

This fix is of the brown paper bag nature but considering that IDE is
long deprecated, let's do that so that random testing which happens to
enable CONFIG_IDE during randconfig builds, doesn't fail because of
this.

Besides, failing the TEST_UNIT_READY command because the drive private
data is gone is something which we could simply do anyway, to denote
that there was a problem communicating with the device.

  BUG: unable to handle kernel NULL pointer dereference at 000001c0
  IP: cdrom_check_status
  *pde = 00000000
  Oops: 0000 [#1] SMP
  CPU: 1 PID: 155 Comm: kworker/1:2 Not tainted 4.14.0-rc8 #127
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  Workqueue: events_freezable_power_ disk_events_workfn
  task: 4fe90980 task.stack: 507ac000
  EIP: cdrom_check_status+0x2c/0x90
  EFLAGS: 00210246 CPU: 1
  EAX: 00000000 EBX: 4fefec00 ECX: 00000000 EDX: 00000000
  ESI: 00000003 EDI: ffffffff EBP: 467a9340 ESP: 507aded0
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 80050033 CR2: 000001c0 CR3: 06e0f000 CR4: 00000690
  Call Trace:
   ? ide_cdrom_check_events_real
   ? cdrom_check_events
   ? disk_check_events
   ? process_one_work
   ? process_one_work
   ? worker_thread
   ? kthread
   ? process_one_work
   ? __kthread_create_on_node
   ? ret_from_fork
  Code: 53 83 ec 14 89 c3 89 d1 be 03 00 00 00 65 a1 14 00 00 00 89 44 24 10 31 c0 8b 43 18 c7 44 24 04 00 00 00 00 c7 04 24 00 00 00 00 <8a> 80 c0 01 00 00 c7 44 24 08 00 00 00 00 83 e0 03 c7 44 24 0c
  EIP: cdrom_check_status+0x2c/0x90 SS:ESP: 0068:507aded0
  CR2: 00000000000001c0
  ---[ end trace 2410e586dd8f88b2 ]---

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "scsi: make 'state' device attribute pollable"

This reverts commit 8a97712e5314aefe16b3ffb4583a34deaa49de04.

This commit added a call to sysfs_notify() from within
scsi_device_set_state(), which in turn turns out to make libata very
unhappy, because ata_eh_detach_dev() does

        spin_lock_irqsave(ap->lock, flags);
        ..
        if (ata_scsi_offline_dev(dev)) {
                dev->flags |= ATA_DFLAG_DETACHED;
                ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
        }

and ata_scsi_offline_dev() then does that scsi_device_set_state() to set
it offline.

So now we called sysfs_notify() from within a spinlocked region, which
really doesn't work.  The 0day robot reported this as:

   BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238

because sysfs_notify() ends up calling kernfs_find_and_get_ns() which
then does mutex_lock(&kernfs_mutex)..

The pollability of the device state isn't critical, so revert this all
for now, and maybe we'll do it differently in the future.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ALSA: seq: Fix OSS sysex delivery in OSS emulation

The SYSEX event delivery in OSS sequencer emulation assumed that the
event is encoded in the variable-length data with the straight
buffering. This was the normal behavior in the past, but during the
development, the chained buffers were introduced for carrying more
data, while the OSS code was left intact. As a result, when a SYSEX
event with the chained buffer data is passed to OSS sequencer port,
it may end up with the wrong memory access, as if it were having a too
large buffer.

This patch addresses the bug, by applying the buffer data expansion by
the generic snd_seq_dump_var_event() helper function.

Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Mark Salyzyn <salyzyn@android.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360

At least one Dell XPS13 9360 is reported to have serious issues with
the Low Power S0 Idle _DSM interface and since this machine model
generally can do ACPI S3 just fine, add a blacklist entry to disable
that interface for Dell XPS13 9360.

Fixes: 8110dd281e15 (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196907
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+

Merge branch 'for-4.14-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
"Another fix for a really old bug.

  It only affects drain_workqueue() which isn't used often and even then
  triggers only during a pretty small race window, so it isn't too
  surprising that it stayed hidden for so long.

  The fix is straight-forward and low-risk. Kudos to Li Bin for
  reporting and fixing the bug"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix NULL pointer dereference

scripts: add leaking_addresses.pl

Currently we are leaking addresses from the kernel to user space. This
script is an attempt to find some of those leakages. Script parses
`dmesg` output and /proc and /sys files for hex strings that look like
kernel addresses.

Only works for 64 bit kernels, the reason being that kernel addresses on
64 bit kernels have 'ffff' as the leading bit pattern making greping
possible. On 32 kernels we don't have this luxury.

Scripts is _slightly_ smarter than a straight grep, we check for false
positives (all 0's or all 1's, and vsyscall start/finish addresses).

[ I think there is a lot of room for improvement here, but it's already
  useful, so I'm merging it as-is. The whole "hash %p format" series is
  expected to go into 4.15, but will not fix %x users, and will not
  incentivize people to look at what they are leaking.     - Linus ]

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ALSA: seq: Avoid invalid lockdep class warning

The recent fix for adding rwsem nesting annotation was using the given
"hop" argument as the lock subclass key.  Although the idea itself
works, it may trigger a kernel warning like:
  BUG: looking up invalid subclass: 8
  ....
since the lockdep has a smaller number of subclasses (8) than we
currently allow for the hops there (10).

The current definition is merely a sanity check for avoiding the too
deep delivery paths, and the 8 hops are already enough.  So, as a
quick fix, just follow the max hops as same as the max lockdep
subclasses.

Fixes: 1f20f9ff57ca ("ALSA: seq: Fix nested rwsem annotation for lockdep splat")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes an unaligned panic in x86/sha-mb and a bug in ccm that
  triggers with certain underlying implementations"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccm - preserve the IV buffer
  crypto: x86/sha1-mb - fix panic due to unaligned access
  crypto: x86/sha256-mb - fix panic due to unaligned access

ALSA: timer: Limit max instances per timer

Currently we allow unlimited number of timer instances, and it may
bring the system hogging way too much CPU when too many timer
instances are opened and processed concurrently.  This may end up with
a soft-lockup report as triggered by syzkaller, especially when
hrtimer backend is deployed.

Since such insane number of instances aren't demanded by the normal
use case of ALSA sequencer and it merely  opens a risk only for abuse,
this patch introduces the upper limit for the number of instances per
timer backend.  As default, it's set to 1000, but for the fine-grained
timer like hrtimer, it's set to 100.

Reported-by: syzbot
Tested-by: Jérôme Glisse <jglisse@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Linux 4.14-rc8

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Two fixes:

   - A PCID related revert that fixes power management and performance
     regressions.

   - The module loader robustization and sanity check commit is rather
     fresh, but it looked like a good idea to apply because of the
     hidden data corruption problem such invalid modules could cause"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/module: Detect and skip invalid relocations
  Revert "x86/mm: Stop calling leave_mm() in idle code"

Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RAS fix from Ingo Molnar:
"Fix an RCU warning that triggers when /dev/mcelog is used"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mcelog: Get rid of RCU remnants

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Various fixes:

   - synchronize kernel and tooling headers

   - cgroup support fix

   - two tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Synchronize kernel ABI headers
  perf/cgroup: Fix perf cgroup hierarchy support
  perf tools: Unwind properly location after REJECT
  perf symbols: Fix memory corruption because of zero length symbols

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
"An irqchip driver init fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-mvebu-gicp: Add missing spin_lock init

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Ingo Molnar:

- workaround for gcc asm handling

- futex race fixes

- objtool build warning fix

- two watchdog fixes: a crash fix (revert) and a bug fix for
   /proc/sys/kernel/watchdog_thresh handling.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Prevent GCC from merging annotate_unreachable(), take 2
  objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
  watchdog/hardlockup/perf: Use atomics to track in-use cpu counter
  watchdog/harclockup/perf: Revert a33d44843d45 ("watchdog/hardlockup/perf: Simplify deferred event destroy")
  futex: Fix more put_pi_state() vs. exit_pi_state_list() races

Merge tag 'enforcement-4.14-rc8' of git://git./linux/kernel/git/gregkh/driver-core

Pull enforcement statement update from Greg KH:
"Documentation: enforcement-statement: name updates

  Here are 12 patches for the kernel-enforcement-statement.rst file that
  add new names, fix the ordering of them, remove a duplicate, and
  remove some company markings that wished to be removed.

  All of these have passed the 0-day testing, even-though it is just a
  documentation file update :)"

* tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Add Frank Rowand to list of enforcement statement endorsers
  doc: add Willy Tarreau to the list of enforcement statement endorsers
  Documentation: Add Tim Bird to list of enforcement statement endorsers
  Documentation: Add my name to kernel enforcement statement
  Documentation: kernel-enforcement-statement.rst: proper sort names
  Documentation: Add Arm Ltd to kernel-enforcement-statement.rst
  Documentation: kernel-enforcement-statement.rst: Remove Red Hat markings
  Documentation: Add myself to the enforcement statement list
  Documentation: Sign kernel enforcement statement
  Add ack for Trond Myklebust to the enforcement statement
  Documentation: update kernel enforcement support list
  Documentation: add my name to supporters

tcp: fix DSACK-based undo on non-duplicate ACK

Fixes DSACK-based undo when sender is in Open State and
an ACK advances snd_una.

Example scenario:
- Sender goes into recovery and makes some spurious rtx.
- It comes out of recovery and enters into open state.
- It sends some more packets, let's say 4.
- The receiver sends an ACK for the first two, but this ACK is lost.
- The sender receives ack for first two, and DSACK for previous
spurious rtx.

Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: don't use l2tp_tunnel_find() in l2tp_ip and l2tp_ip6

Using l2tp_tunnel_find() in l2tp_ip_recv() is wrong for two reasons:

  * It doesn't take a reference on the returned tunnel, which makes the
    call racy wrt. concurrent tunnel deletion.

  * The lookup is only based on the tunnel identifier, so it can return
    a tunnel that doesn't match the packet's addresses or protocol.

For example, a packet sent to an L2TPv3 over IPv6 tunnel can be
delivered to an L2TPv2 over UDPv4 tunnel. This is worse than a simple
cross-talk: when delivering the packet to an L2TP over UDP tunnel, the
corresponding socket is UDP, where ->sk_backlog_rcv() is NULL. Calling
sk_receive_skb() will then crash the kernel by trying to execute this
callback.

And l2tp_tunnel_find() isn't even needed here. __l2tp_ip_bind_lookup()
properly checks the socket binding and connection settings. It was used
as a fallback mechanism for finding tunnels that didn't have their data
path registered yet. But it's not limited to this case and can be used
to replace l2tp_tunnel_find() in the general case.

Fix l2tp_ip6 in the same way.

Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

x86/module: Detect and skip invalid relocations

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address. This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand. Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

- omit EFI memory map sorting, which was recently introduced, but
   caused problems with the decompressor due to additional sections
   being emitted.

- avoid unaligned load fault-generating instructions in the
   decompressor by switching to a private unaligned implementation.

- add a symbol into the decompressor to further debug non-boot
   situations (ld's documentation is extremely poor for how "." works,
   ld doesn't seem to follow its own documentation!)

- parse endian information to sparse

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: add debug ".edata_real" symbol
  ARM: 8716/1: pass endianness info to sparse
  efi/libstub: arm: omit sorting of the UEFI memory map
  ARM: 8715/1: add a private asm/unaligned.h

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
  one-liner x86 KVM guest fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Update APICv on APIC reset
  KVM: VMX: Do not fully reset PI descriptor on vCPU reset
  kvm: Return -ENODEV from update_persistent_clock
  KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
  KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
  KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
  KVM: arm/arm64: vgic-its: Fix return value for device table restore
  arm/arm64: kvm: Disable branch profiling in HYP code
  arm/arm64: kvm: Move initialization completion message
  arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
  KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
"Only two patches came in over the last two weeks: Uniphier USB support
  needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a
  Marvell MVEBU stability issue has been fixed"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: mvebu: pl310-cache disable double-linefill
  arm64: dts: uniphier: add STDMAC clock to EHCI nodes
  ARM: dts: uniphier: add STDMAC clock to EHCI nodes

Merge tag 'mips_fixes_4.14' of git://git./linux/kernel/git/jhogan/mips

Pull MIPS fixes from James Hogan:
"A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
  email address updates:

  Maintainership updates:
   - imgtec.com -> mips.com email addresses (this trivially updates
     comments in quite a few files, as well as MAINTAINERS)
   - Pistachio SoC maintainership update

  Fixes:
   - NI 169445 build (new platform in 4.14)
   - EVA regression (4.14)
   - SMP-CPS build & preemption regressions (4.14)
   - SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
   - ebpf_jit error return (4.13)
   - SMP-CMP build regressions (4.11 and 4.14)
   - bad UASM microMIPS encoding (3.16)
   - CM definitions (3.15)"

[ I had taken the email address updates separately, because I didn't
  expect James to send a pull request, so those got applied twice.   - Linus]

* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Update email address for Marcin Nowakowski
  MIPS: smp-cmp: Fix vpe_id build error
  MAINTAINERS: Update Pistachio platform maintainers
  MIPS: smp-cmp: Use right include for task_struct
  MIPS: Update Goldfish RTC driver maintainer email address
  MIPS: Update RINT emulation maintainer email address
  MIPS: CPS: Fix use of current_cpu_data in preemptible code
  MIPS: SMP: Fix deadlock & online race
  MIPS: bpf: Fix a typo in build_one_insn()
  MIPS: microMIPS: Fix incorrect mask in insn_table_MM
  MIPS: Fix CM region target definitions
  MIPS: generic: Fix compilation error from include asm/mips-cpc.h
  MIPS: Fix exception entry when CONFIG_EVA enabled
  MIPS: generic: Fix NI 169445 its build
  Update MIPS email addresses

cpufreq: schedutil: Examine the correct CPU when we update util

After commit 674e75411fc2 (sched: cpufreq: Allow remote cpufreq
callbacks) we stopped to always read the utilization for the CPU we
are running the governor on, and instead we read it for the CPU
which we've been told has updated utilization. This is stored in
sugov_cpu->cpu.

The value is set in sugov_register() but we clear it in sugov_start()
which leads to always looking at the utilization of CPU0 instead of
the correct one.

Fix this by consolidating the initialization code into sugov_start().

Fixes: 674e75411fc2 (sched: cpufreq: Allow remote cpufreq callbacks)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

objtool: Prevent GCC from merging annotate_unreachable(), take 2

This fixes the following warning with GCC 4.6:

  mm/migrate.o: warning: objtool: migrate_misplaced_transhuge_page()+0x71: unreachable instruction

The problem is that the compiler merged identical annotate_unreachable()
inline asm blocks, resulting in a missing 'unreachable' annotation.

This problem happened before, and was partially fixed with:

  3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")

That commit tried to ensure that each instance of the
annotate_unreachable() inline asm statement has a unique label.  It used
the __LINE__ macro to generate the label number.  However, even the line
number isn't necessarily unique when used in an inline function with
multiple callers (in this case, __alloc_pages_node()'s use of
VM_BUG_ON).

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Fixes: 3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")
Link: http://lkml.kernel.org/r/20171103221941.cajpwszir7ujxyc4@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Revert "x86/mm: Stop calling leave_mm() in idle code"

This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5.

The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch.  With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.

Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in:

    commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode").

That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.

Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.

FWIW, this heuristic is lousy.  Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway.  What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up.  This is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?).  OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.

We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes.  All the information need is
available before rcu_idle_enter() needs to happen.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code"
Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

net: usb: asix: fill null-ptr-deref in asix_suspend

When asix_suspend() is called dev->driver_priv might not have been
assigned a value, so we need to check that it's not NULL.

Found by syzkaller.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006bb36300 task.stack: ffff88006bba8000
RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629
RSP: 0018:ffff88006bbae718 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644
RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008
RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40
R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80
FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0
Call Trace:
usb_suspend_interface drivers/usb/core/driver.c:1209
usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314
usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852
__rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334
rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461
rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596
__pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009
pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251
usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487
hub_port_connect drivers/usb/core/hub.c:4903
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x3a1/0x470 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00
00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80>
3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c
RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718
---[ end trace dfc4f5649284342c ]---

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed

When run ipvs in two different network namespace at the same host, and one
ipvs transport network traffic to the other network namespace ipvs.
'ipvs_property' flag will make the second ipvs take no effect. So we should
clear 'ipvs_property' when SKB network namespace changed.

Fixes: 621e84d6f373 ("dev: introduce skb_scrub_packet()")
Signed-off-by: Ye Yin <hustcat@gmail.com>
Signed-off-by: Wei Zhou <chouryzhou@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: update latest firmware version supported

Change t4fw_version.h to update latest firmware version
number to 1.16.63.0.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: Add Frank Rowand to list of enforcement statement endorsers

Add my name to the list.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

doc: add Willy Tarreau to the list of enforcement statement endorsers

add me to the list.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/headers: Synchronize kernel ABI headers

After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.

Sync them:

- tools/arch/x86/include/asm/disabled-features.h,
   tools/arch/x86/include/asm/required-features.h,
   tools/include/linux/hash.h:

     Remove the SPDX tag where the kernel version does not have it.

- tools/include/asm-generic/bitops/__fls.h,
   tools/include/asm-generic/bitops/arch_hweight.h,
   tools/include/asm-generic/bitops/const_hweight.h,
   tools/include/asm-generic/bitops/fls.h,
   tools/include/asm-generic/bitops/fls64.h,
   tools/include/uapi/asm-generic/ioctls.h,
   tools/include/uapi/asm-generic/mman-common.h,
   tools/include/uapi/sound/asound.h,
   tools/include/uapi/linux/kvm.h,
   tools/include/uapi/linux/perf_event.h,
   tools/include/uapi/linux/sched.h,
   tools/include/uapi/linux/vhost.h,
   tools/include/uapi/sound/asound.h:

     Add the SPDX tag of the respective kernel header.

- tools/include/uapi/linux/bpf_common.h,
   tools/include/uapi/linux/fcntl.h,
   tools/include/uapi/linux/hw_breakpoint.h,
   tools/include/uapi/linux/mman.h,
   tools/include/uapi/linux/stat.h,

     Change the tag to the kernel header version:

       -/* SPDX-License-Identifier: GPL-2.0 */
       +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */

Also sync other header details:

- include/uapi/sound/asound.h:

     Fix pointless end of line whitespace noise the header grew in this cycle.

- tools/arch/x86/lib/memcpy_64.S:

     Sync the code and add tools/include/asm/export.h with dummy wrappers
     to support building the kernel side code in a tooling header environment.

- tools/include/uapi/asm-generic/mman.h,
   tools/include/uapi/linux/bpf.h:

     Sync other details that don't impact tooling's use of the ABIs.

Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version

This fixes the following warning:

warning: objtool: x86 instruction decoder differs from kernel

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into core/urgent, to pick up dependent commits

We want to fix an objtool build warning that got introduced in the latest upstream kernel.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"Just a couple of fixups to the sparse-keymap module and the Microchip
  AR1021 touchscreen driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sparse-keymap - send sync event for KE_SW/KE_VSW
  Input: ar1021_i2c - set INPUT_PROP_DIRECT

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
"One fix for USB clks on Uniphier PXs3 SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: uniphier: fix clock data for PXs3

Input: sparse-keymap - send sync event for KE_SW/KE_VSW

Sync events are sent by sparse_keymap_report_entry for normal KEY_*
events, and are generated by several drivers after generating
SW_* events, so sparse_keymap_report_entry should do the same.

Without the sync, events are accumulated in the kernel.

Currently, no driver uses sparse-keymap for SW_* events, but
it is required for the intel-vbtn platform driver to generate
SW_TABLET_MODE events.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ar1021_i2c - set INPUT_PROP_DIRECT

If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices. Let's add it.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile fixes from Chris Metcalf:
"Two one-line bug fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: Implement ->set_state_oneshot_stopped()
tile: pass machine size to sparse

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"One minor fix in the error leg of the qla2xxx driver (it oopses the
  system if we get an error trying to start the internal kernel thread).

  The fix is minor because the problem isn't often encountered in the
  field (although it can be induced by inserting the module in a low
  memory environment)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix oops in qla2x00_probe_one error path

arch/tile: Implement ->set_state_oneshot_stopped()

set_state_oneshot_stopped() is called by the clkevt core, when the
next event is required at an expiry time of 'KTIME_MAX'. This normally
happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes.

This patch makes the clockevent device to stop on such an event, to
avoid spurious interrupts, as explained by: commit 8fff52fd5093
("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state").

Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

Merge tag 'powerpc-4.14-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.14.

  This is bigger than I like to send at rc7, but that's at least partly
  because I didn't send any fixes last week. If it wasn't for the IMC
  driver, which is new and getting heavy testing, the diffstat would
  look a bit better. I've also added ftrace on big endian to my test
  suite, so we shouldn't break that again in future.

   - A fix to the handling of misaligned paste instructions (P9 only),
     where a change to a #define has caused the check for the
     instruction to always fail.

   - The preempt handling was unbalanced in the radix THP flush (P9
     only). Though we don't generally use preempt we want to keep it
     working as much as possible.

   - Two fixes for IMC (P9 only), one when booting with restricted
     number of CPUs and one in the error handling when initialisation
     fails due to firmware etc.

   - A revert to fix function_graph on big endian machines, and then a
     rework of the reverted patch to fix kprobes blacklist handling on
     big endian machines.

  Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan,
  Naveen N. Rao, Nicholas Piggin, Paul Mackerras"

* tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix core-imc hotplug callback failure during imc initialization
  powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text
  Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols"
  powerpc/64s/radix: Fix preempt imbalance in TLB flush
  powerpc: Fix check for copy/paste instructions in alignment handler
  powerpc/perf: Fix IMC allocation routine

Merge tag 'mmc-v4.14-rc4-3' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"Fix dw_mmc request timeout issues"

* tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc: Fix the DTO timeout calculation
  mmc: dw_mmc: Add locking to the CTO timer
  mmc: dw_mmc: Fix the CTO timeout calculation
  mmc: dw_mmc: cancel the CTO timer after a voltage switch

Merge tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:

- one nouveau regression fix

- some amdgpu fixes for stable to fix hangs on some harvested Polaris
   GPUs

- a set of KASAN and regression fixes for i915, their CI system seems
   to be working pretty well now.

* tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: allow harvesting check for Polaris VCE
  drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting
  drm/i915: Check incoming alignment for unfenced buffers (on i915gm)
  drm/nouveau/kms/nv50: use the correct state for base channel notifier setup
  drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)
  drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)
  drm/i915/edp: read edp display control registers unconditionally
  drm/i915: Do not rely on wm preservation for ILK watermarks
  drm/i915: Cancel the modeset retry work during modeset cleanup

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"Hopefully this is the last batch of networking fixes for 4.14

  Fingers crossed...

   1) Fix stmmac to use the proper sized OF property read, from Bhadram
      Varka.

   2) Fix use after free in net scheduler tc action code, from Cong
      Wang.

   3) Fix SKB control block mangling in tcp_make_synack().

   4) Use proper locking in fib_dump_info(), from Florian Westphal.

   5) Fix IPG encodings in systemport driver, from Florian Fainelli.

   6) Fix division by zero in NV TCP congestion control module, from
      Konstantin Khlebnikov.

   7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: systemport: Correct IPG length settings
  tcp: do not mangle skb->cb[] in tcp_make_synack()
  fib: fib_dump_info can no longer use __in_dev_get_rtnl
  stmmac: use of_property_read_u32 instead of read_u8
  net_sched: hold netns refcnt for each action
  net_sched: acquire RTNL in tc_action_net_exit()
  net: vrf: correct FRA_L3MDEV encode type
  tcp_nv: fix division by zero in tcpnv_acked()
  netfilter: nf_reject_ipv4: Fix use-after-free in send_reset
  netfilter: nft_set_hash: disable fast_ops for 2-len keys

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, swap: fix race between swap count continuation operations
  mm/huge_memory.c: deposit page table when copying a PMD migration entry
  initramfs: fix initramfs rebuilds w/ compression after disabling
  fs/hugetlbfs/inode.c: fix hwpoison reserve accounting
  ocfs2: fstrim: Fix start offset of first cluster group during fstrim
  mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry
  userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size

Update MIPS email addresses

MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:

- Have 10 or more patches in mainline authored using an @imgtec.com
   email address, or any patches dated within the past year.

- Are still with Imagination but leaving as part of the MIPS business
   unit, as determined from an internal email address list.

- Haven't already updated their email address (ie. JamesH) or expressed
   a desire to be excluded (ie. Maciej).

- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
   myself.

New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list.  An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.

Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo

Commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for
/proc/cpuinfo "cpu MHz"") is not sufficient to restore the previous
behavior of "cpu MHz" in /proc/cpuinfo on x86 due to some changes
made after the commit it has reverted.

To address this, make the code in question use arch_freq_get_on_cpu()
which also is used by cpufreq for reporting the current frequency of
CPUs and since that function doesn't really depend on cpufreq in any
way, drop the CONFIG_CPU_FREQ dependency for the object file
containing it.

Also refactor arch_freq_get_on_cpu() somewhat to avoid IPIs and
return cached values right away if it is called very often over a
short time (to prevent user space from triggering IPI storms through
it).

Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"")
Cc: stable@kernel.org # 4.13 - together with 890da9cf0983
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, swap: fix race between swap count continuation operations

One page may store a set of entries of the sis->swap_map
(swap_info_struct->swap_map) in multiple swap clusters.

If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX,
multiple pages will be used to store the set of entries of the
sis->swap_map.  And the pages are linked with page->lru.  This is called
swap count continuation.  To access the pages which store the set of
entries of the sis->swap_map simultaneously, previously, sis->lock is
used.  But to improve the scalability of __swap_duplicate(), swap
cluster lock may be used in swap_count_continued() now.  This may race
with add_swap_count_continuation() which operates on a nearby swap
cluster, in which the sis->swap_map entries are stored in the same page.

The race can cause wrong swap count in practice, thus cause unfreeable
swap entries or software lockup, etc.

To fix the race, a new spin lock called cont_lock is added to struct
swap_info_struct to protect the swap count continuation page list.  This
is a lock at the swap device level, so the scalability isn't very well.
But it is still much better than the original sis->lock, because it is
only acquired/released when swap count continuation is used.  Which is
considered rare in practice.  If it turns out that the scalability
becomes an issue for some workloads, we can split the lock into some
more fine grained locks.

Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com
Fixes: 235b62176712 ("mm/swap: add cluster lock")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: deposit page table when copying a PMD migration entry

We need to deposit pre-allocated PTE page table when a PMD migration
entry is copied in copy_huge_pmd(). Otherwise, we will leak the
pre-allocated page and cause a NULL pointer dereference later in
zap_huge_pmd().

The missing counters during PMD migration entry copy process are added
as well.

The bug report is here: https://lkml.org/lkml/2017/10/29/214

Link: http://lkml.kernel.org/r/20171030144636.4836-1-zi.yan@sent.com
Fixes: 84c3fc4e9c563 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initramfs: fix initramfs rebuilds w/ compression after disabling

This is a follow-up to commit 57ddfdaa9a72 ("initramfs: fix disabling of
initramfs (and its compression)").  This particular commit fixed the use
case where we build the kernel with an initramfs with no compression,
and then we build the kernel with no initramfs.

Now this still left us with the same case as described here:

  http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com

not working with initramfs compression.  This can be seen by the
following steps/timestamps:

  https://www.spinics.net/lists/kernel/msg2598153.html

.initramfs_data.cpio.gz.cmd is correct:

  cmd_usr/initramfs_data.cpio.gz := /bin/bash
  ./scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz  -u 1000 -g 1000  /home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev

and was generated the first time we did generate the gzip initramfs, so
the command has not changed, nor its arguments, so we just don't call
it, no initramfs cpio is re-generated as a consequence.

The fix for this problem is just to properly keep track of the
.initramfs_cpio_data.d file by suffixing it with the compression
extension.  This takes care of properly tracking dependencies such that
the initramfs get (re)generated any time files are added/deleted etc.

Link: http://lkml.kernel.org/r/20170930033936.6722-1-f.fainelli@gmail.com
Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initramfs compression algorithm")
Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: "Francisco Blas Izquierdo Riera (klondike)" <klondike@xiscosoft.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/hugetlbfs/inode.c: fix hwpoison reserve accounting

Calling madvise(MADV_HWPOISON) on a hugetlbfs page will result in bad
(negative) reserved huge page counts.  This may not happen immediately,
but may happen later when the underlying file is removed or filesystem
unmounted.  For example:

  AnonHugePages:         0 kB
  ShmemHugePages:        0 kB
  HugePages_Total:       1
  HugePages_Free:        0
  HugePages_Rsvd:    18446744073709551615
  HugePages_Surp:        0
  Hugepagesize:       2048 kB

In routine hugetlbfs_error_remove_page(), hugetlb_fix_reserve_counts is
called after remove_huge_page.  hugetlb_fix_reserve_counts is designed
to only be called/used only if a failure is returned from
hugetlb_unreserve_pages.  Therefore, call hugetlb_unreserve_pages as
required and only call hugetlb_fix_reserve_counts in the unlikely event
that hugetlb_unreserve_pages returns an error.

Link: http://lkml.kernel.org/r/20171019230007.17043-2-mike.kravetz@oracle.com
Fixes: 78bb920344b8 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fstrim: Fix start offset of first cluster group during fstrim

The first cluster group descriptor is not stored at the start of the
group but at an offset from the start.  We need to take this into
account while doing fstrim on the first cluster group.  Otherwise we
will wrongly start fstrim a few blocks after the desired start block and
the range can cross over into the next cluster group and zero out the
group descriptor there.  This can cause filesytem corruption that cannot
be fixed by fsck.

Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry

When the pagetable is walked in the implementation of /proc/<pid>/pagemap,
pmd_soft_dirty() is used for both the PMD huge page map and the PMD
migration entries. That is wrong, pmd_swp_soft_dirty() should be used
for the PMD migration entries instead because the different page table
entry flag is used.

As a result, /proc/pid/pagemap may report incorrect soft dirty information
for PMD migration entries.

Link: http://lkml.kernel.org/r/20171017081818.31795-1-ying.huang@intel.com
Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>