linux-2.6-microblaze.git
14 years agosunxvr500: Ignore secondary output PCI devices.
David S. Miller [Sun, 4 Apr 2010 08:12:50 +0000 (01:12 -0700)]
sunxvr500: Ignore secondary output PCI devices.

These just represent the secondary and further heads attached to the
card, and they have different sets of PCI bar registers to map.

So don't try to drive them in the main driver.

Reported-by: Frans van Berckel <fberckel@xs4all.nl>
Tested-by: Frans van Berckel <fberckel@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosparc64: Implement perf_arch_fetch_caller_regs
David S. Miller [Sun, 4 Apr 2010 06:50:59 +0000 (23:50 -0700)]
sparc64: Implement perf_arch_fetch_caller_regs

We provide regs->tstate, regs->tpc, regs->tnpc and
regs->u_regs[UREG_FP].

regs->tstate is necessary for:

user_mode() (via perf_exclude_event())

perf_misc_flags() (via perf_prepare_sample())

regs->tpc is necessary for:

perf_instruction_pointer() (via perf_prepare_sample())

and regs->u_regs[UREG_FP] is necessary for:

perf_callchain() (via perf_prepare_sample())

The regs->tnpc value is provided just to be tidy.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosparc64: Update defconfig.
David S. Miller [Sat, 3 Apr 2010 23:18:32 +0000 (16:18 -0700)]
sparc64: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Sat, 3 Apr 2010 22:49:14 +0000 (15:49 -0700)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

14 years agosparc64: Fix array size reported by vmemmap_populate()
Ben Hutchings [Sat, 3 Apr 2010 20:58:45 +0000 (13:58 -0700)]
sparc64: Fix array size reported by vmemmap_populate()

vmemmap_populate() attempts to report the used index and total size of
vmemmap_table, but it wrongly shifts the total size so that it is
always shown as 0.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 3 Apr 2010 02:50:11 +0000 (19:50 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5965/1: Fix soft lockup in at91 udc driver
  ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
  ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
  ARM: 6003/1: removing compilation warning from pl061.h
  ARM: 6001/1: removing compilation warning comming from clkdev.h
  ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
  ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
  ARM: 5997/1: ARM: Correct the VFPv3 detection
  ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
  ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
  ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
  ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)

14 years agoMerge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Sat, 3 Apr 2010 02:49:50 +0000 (19:49 -0700)]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree

14 years agoMerge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 3 Apr 2010 02:48:54 +0000 (19:48 -0700)]
Merge branch 'reiserfs/kill-bkl' of git://git./linux/kernel/git/frederic/random-tracing

* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  reiserfs: Fix locking BUG during mount failure

14 years agoPCI quirk: RS780/RS880: disable MSI behind the PCI bridge
Clemens Ladisch [Fri, 2 Apr 2010 16:46:06 +0000 (18:46 +0200)]
PCI quirk: RS780/RS880: disable MSI behind the PCI bridge

The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines.  To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.

[rjw: Added the PCI_VENDOR_ID_AI quirk.]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Sat, 3 Apr 2010 02:45:05 +0000 (19:45 -0700)]
Merge branch 'kgdb-fixes' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Turn off tracing while in the debugger
  kgdb: use atomic_inc and atomic_dec instead of atomic_set
  kgdb: eliminate kgdb_wait(), all cpus enter the same way
  kgdbts,sh: Add in breakpoint pc offset for superh
  kgdb: have ebin2mem call probe_kernel_write once

14 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Sat, 3 Apr 2010 02:44:42 +0000 (19:44 -0700)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
  Freezer: Only show the state of tasks refusing to freeze

14 years agotty: release_one_tty() forgets to put pids
Oleg Nesterov [Fri, 2 Apr 2010 16:05:12 +0000 (18:05 +0200)]
tty: release_one_tty() forgets to put pids

release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokgdb: Turn off tracing while in the debugger
Jason Wessel [Fri, 2 Apr 2010 16:57:18 +0000 (11:57 -0500)]
kgdb: Turn off tracing while in the debugger

The kernel debugger should turn off kernel tracing any time the
debugger is active and restore it on resume.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
14 years agokgdb: use atomic_inc and atomic_dec instead of atomic_set
Jason Wessel [Fri, 2 Apr 2010 19:58:18 +0000 (14:58 -0500)]
kgdb: use atomic_inc and atomic_dec instead of atomic_set

Memory barriers should be used for the kgdb cpu synchronization.  The
atomic_set() does not imply a memory barrier.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
14 years agokgdb: eliminate kgdb_wait(), all cpus enter the same way
Jason Wessel [Fri, 2 Apr 2010 16:47:02 +0000 (11:47 -0500)]
kgdb: eliminate kgdb_wait(), all cpus enter the same way

This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.

A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.

A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.

Previously the salve cpu would have called kgdb_wait().  This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
14 years agokgdbts,sh: Add in breakpoint pc offset for superh
Jason Wessel [Fri, 2 Apr 2010 16:31:35 +0000 (11:31 -0500)]
kgdbts,sh: Add in breakpoint pc offset for superh

The kgdb test suite mimics the behavior of gdb.  For the sh
architecture the pc must be decremented by 2 for software breakpoint.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
14 years agokgdb: have ebin2mem call probe_kernel_write once
Jason Wessel [Fri, 2 Apr 2010 16:33:29 +0000 (11:33 -0500)]
kgdb: have ebin2mem call probe_kernel_write once

Rather than call probe_kernel_write() one byte at a time, process the
whole buffer locally and pass the entire result in one go.  This way,
architectures that need to do special handling based on the length can
do so, or we only end up calling memcpy() once.

[sonic.zhang@analog.com: Reported original problem and preliminary patch]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Fri, 2 Apr 2010 15:18:02 +0000 (08:18 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add NOGET quirk for Quanta Pixart touchscreen
  HID: fix oops in gyration_event()

14 years agoMerge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Fri, 2 Apr 2010 14:33:38 +0000 (07:33 -0700)]
Merge branch 'sh/for-2.6.34' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up the SH-3 build for recent TLB changes.
  sh: export return_address() symbol.
  sh: Enable the mmu in start_secondary()
  sh: Fix FDPIC binary loader
  arch/sh/kernel: Use set_cpus_allowed_ptr
  sh: Update ecovec_defconfig
  USB gadget r8a66597-udc.c: duplicated include
  sh: update the TLB replacement counter for entry wiring.

14 years agosh: Fix up the SH-3 build for recent TLB changes.
Paul Mundt [Fri, 2 Apr 2010 07:13:27 +0000 (16:13 +0900)]
sh: Fix up the SH-3 build for recent TLB changes.

While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4
and later TLBs, these features are absent on SH-3. This splits out
local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the
old SH-3 one, subsequently fixing up the build.

This will probably want some further reordering and tidying in the
future, but that's out of scope at present.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
14 years agosh: export return_address() symbol.
Paul Mundt [Fri, 2 Apr 2010 07:02:33 +0000 (16:02 +0900)]
sh: export return_address() symbol.

This is needed with some of the tracing code built as modules, so provide
the export.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
14 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 1 Apr 2010 16:19:42 +0000 (09:19 -0700)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (76 commits)
  drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
  drm/radeon/kms: rs400/480 should set common registers.
  drm/radeon/kms: add sanity check to wptr.
  drm/radeon/kms/evergreen: get DP working
  drm/radeon/kms: add hw_i2c module option
  drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
  drm/radeon/kms: disable MSI on IGP chips
  drm/radeon/kms: display watermark updates (v2)
  drm/radeon/kms/dp: disable training pattern on the sink at the end of link training
  drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
  drm/radeon/kms/dp: remove extraneous training complete call
  drm/radeon/kms/atom: minor fixes to transmitter setup
  drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
  drm: fix build error when SYSRQ is disabled
  drm/radeon/kms: fix macbookpro connector quirk
  drm/radeon/r6xx/r7xx: further safe reg clean up
  drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
  drm/radeon/kms: bump the version for r6xx/r7xx const buffer support
  drm/radeon/r6xx/r7xx: CS parser fixes
  drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
  ...

Fix up MSI-related conflicts in drivers/gpu/drm/radeon/radeon_irq_kms.c

14 years agoMerge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Thu, 1 Apr 2010 16:14:20 +0000 (09:14 -0700)]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (35 commits)
  microblaze: Support word copying in copy_tofrom_user
  microblaze: Print early printk information to log buffer
  microblaze: head.S typo fix
  microblaze: Use MICROBLAZE_TLB_SIZE in asm code
  microblaze: Kconfig Fix - pci
  microblaze: Adding likely macros
  microblaze: Add .type and .size to ASM functions
  microblaze: Fix TLB macros
  microblaze: Use instruction with delay slot
  microblaze: Remove additional resr and rear loading
  microblaze: Change register usage for ESR and EAR
  microblaze: Prepare work for optimization in exception code
  microblaze: Add DEBUG option
  microblaze: Support systems without lmb bram
  microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
  microblaze: uaccess: Unify __copy_tofrom_user
  microblaze: uaccess: Move functions to generic location
  microblaze: uaccess: Fix put_user for noMMU
  microblaze: uaccess: Fix get_user macro for noMMU
  microblaze: uaccess: fix clear_user for noMMU kernel
  ...

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Thu, 1 Apr 2010 16:13:57 +0000 (09:13 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
  asus-laptop: fix warning in asus_handle_init

14 years agooom: fix the unsafe usage of badness() in proc_oom_score()
Oleg Nesterov [Thu, 1 Apr 2010 13:13:57 +0000 (15:13 +0200)]
oom: fix the unsafe usage of badness() in proc_oom_score()

proc_oom_score(task) has a reference to task_struct, but that is all.
If this task was already released before we take tasklist_lock

- we can't use task->group_leader, it points to nowhere

- it is not safe to call badness() even if this task is
  ->group_leader, has_intersects_mems_allowed() assumes
  it is safe to iterate over ->thread_group list.

- even worse, badness() can hit ->signal == NULL

Add the pid_alive() check to ensure __unhash_process() was not called.

Also, use "task" instead of task->group_leader. badness() should return
the same result for any sub-thread. Currently this is not true, but
this should be changed anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomicroblaze: Support word copying in copy_tofrom_user
Michal Simek [Mon, 22 Mar 2010 19:31:26 +0000 (20:31 +0100)]
microblaze: Support word copying in copy_tofrom_user

Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Print early printk information to log buffer
Michal Simek [Wed, 24 Mar 2010 10:07:10 +0000 (11:07 +0100)]
microblaze: Print early printk information to log buffer

If early printk console is not enabled then all messages
are written to log buffer.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: head.S typo fix
Michal Simek [Wed, 24 Mar 2010 10:06:23 +0000 (11:06 +0100)]
microblaze: head.S typo fix

I forget to change register name in comments.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Use MICROBLAZE_TLB_SIZE in asm code
Michal Simek [Wed, 24 Mar 2010 09:09:17 +0000 (10:09 +0100)]
microblaze: Use MICROBLAZE_TLB_SIZE in asm code

TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Kconfig Fix - pci
Michal Simek [Tue, 23 Mar 2010 14:46:10 +0000 (15:46 +0100)]
microblaze: Kconfig Fix - pci

I forget to remove pci Kconfig option.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Adding likely macros
Michal Simek [Tue, 23 Mar 2010 14:37:02 +0000 (15:37 +0100)]
microblaze: Adding likely macros

On the base on GCOV analytics is helpful to add likely/unlikely
macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Add .type and .size to ASM functions
Michal Simek [Tue, 23 Mar 2010 07:09:32 +0000 (08:09 +0100)]
microblaze: Add .type and .size to ASM functions

Cachegrind analysis need this fix to be able to log asm functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix TLB macros
Michal Simek [Mon, 22 Mar 2010 13:54:35 +0000 (14:54 +0100)]
microblaze: Fix TLB macros

To be able to do trace TLB operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Use instruction with delay slot
Michal Simek [Mon, 22 Mar 2010 19:43:27 +0000 (20:43 +0100)]
microblaze: Use instruction with delay slot

Sync labels.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Remove additional resr and rear loading
Michal Simek [Fri, 19 Mar 2010 11:50:35 +0000 (12:50 +0100)]
microblaze: Remove additional resr and rear loading

RESR and REAR uses the same regs in whole file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Change register usage for ESR and EAR
Michal Simek [Fri, 19 Mar 2010 11:44:40 +0000 (12:44 +0100)]
microblaze: Change register usage for ESR and EAR

This change synchronize register usage in code.
ESR = R4
EAR = R3

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Prepare work for optimization in exception code
Michal Simek [Mon, 22 Mar 2010 19:37:23 +0000 (20:37 +0100)]
microblaze: Prepare work for optimization in exception code

Any sync branch must follow mts instructions not mfs.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Add DEBUG option
Michal Simek [Thu, 18 Mar 2010 06:23:04 +0000 (07:23 +0100)]
microblaze: Add DEBUG option

Disable debug option in asm code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Support systems without lmb bram
Michal Simek [Mon, 15 Mar 2010 07:48:27 +0000 (08:48 +0100)]
microblaze: Support systems without lmb bram

When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.

DTS fragment could look like:
DDR2_SDRAM: memory@0 {
device_type = "memory";
reg = < 0x0 0x10000000 >;
} ;

Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.

You have to solve how to load the kernel before cpu starts.
Tested with XMD.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
Michal Simek [Mon, 22 Mar 2010 17:49:45 +0000 (18:49 +0100)]
microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user

Last sync.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Unify __copy_tofrom_user
Michal Simek [Mon, 22 Mar 2010 17:39:20 +0000 (18:39 +0100)]
microblaze: uaccess: Unify __copy_tofrom_user

Move to generic location.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Move functions to generic location
Michal Simek [Mon, 22 Mar 2010 17:23:45 +0000 (18:23 +0100)]
microblaze: uaccess: Move functions to generic location

noMMU and MMU use them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Fix put_user for noMMU
Michal Simek [Mon, 22 Mar 2010 15:22:41 +0000 (16:22 +0100)]
microblaze: uaccess: Fix put_user for noMMU

Here is small regression on dhrystone tests and I think
that on all benchmarking tests. It is due to better checking
mechanism in put_user macro

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Fix get_user macro for noMMU
Michal Simek [Mon, 8 Mar 2010 09:52:24 +0000 (10:52 +0100)]
microblaze: uaccess: Fix get_user macro for noMMU

Use unified version.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: fix clear_user for noMMU kernel
Michal Simek [Mon, 22 Mar 2010 15:02:59 +0000 (16:02 +0100)]
microblaze: uaccess: fix clear_user for noMMU kernel

Previous patches fixed only MMU version and this is the first
patch for noMMU kernel

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: Fix strncpy_from_user function
Michal Simek [Mon, 8 Mar 2010 08:38:02 +0000 (09:38 +0100)]
microblaze: uaccess: Fix strncpy_from_user function

Generic implementation for noMMU and MMU version

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: fix copy_from_user macro
Michal Simek [Mon, 22 Mar 2010 14:56:32 +0000 (15:56 +0100)]
microblaze: uaccess: fix copy_from_user macro

copy_from_user macro also use copy_tofrom_user function

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: copy_to_user unification
Michal Simek [Mon, 22 Mar 2010 14:52:53 +0000 (15:52 +0100)]
microblaze: uaccess: copy_to_user unification

noMMU and MMU kernel will use copy copy_tofrom_user
asm implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: sync put/get/clear_user macros
Michal Simek [Mon, 22 Mar 2010 14:46:56 +0000 (15:46 +0100)]
microblaze: uaccess: sync put/get/clear_user macros

Add macro description and resort.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: fix put_user and get_user macros
Michal Simek [Mon, 22 Mar 2010 14:25:12 +0000 (15:25 +0100)]
microblaze: uaccess: fix put_user and get_user macros

Use FIXUP macros and resort them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: fix __get_user_asm macro
Michal Simek [Fri, 5 Mar 2010 17:03:53 +0000 (18:03 +0100)]
microblaze: uaccess: fix __get_user_asm macro

It is used __FIXUP_SECTION and __EX_TABLE_SECTION macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: uaccess: fix clean user macro
Michal Simek [Fri, 5 Mar 2010 15:50:01 +0000 (16:50 +0100)]
microblaze: uaccess: fix clean user macro

This is the first patch which does uaccess unification.
I choosed to do several patches to be able to use bisect
in future if any fault happens.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: move noMMU __range_ok function to uaccess.h
Michal Simek [Fri, 5 Mar 2010 14:49:53 +0000 (15:49 +0100)]
microblaze: move noMMU __range_ok function to uaccess.h

The same noMMU and MMU functions should be placed in
one file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Move exception_table_entry upward
Michal Simek [Fri, 5 Mar 2010 14:37:57 +0000 (15:37 +0100)]
microblaze: Move exception_table_entry upward

Just sort to be able remove whole block.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Remove segment.h
Michal Simek [Fri, 5 Mar 2010 14:34:12 +0000 (15:34 +0100)]
microblaze: Remove segment.h

I would like to use asm-generic uaccess.h where are segment
macros defined. This is just first step.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Remove memset in free_init_pages
Michal Simek [Wed, 3 Mar 2010 16:03:21 +0000 (17:03 +0100)]
microblaze: Remove memset in free_init_pages

We don't need to do it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Makefile cleanups
Arun Bhanu [Wed, 17 Mar 2010 08:06:04 +0000 (16:06 +0800)]
microblaze: Makefile cleanups

If CONFIG_INITRAMFS_SOURCE is set, "scripts/gen_initramfs_list.sh"
checks if the cpio image exists. Remove the duplicate check from the
Makefile.

Remove the "clean-kernel" variable which is unused in the Makefile and
is not used by the Kbuild.

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix Makefile to delete build generated files
Arun Bhanu [Wed, 17 Mar 2010 08:06:03 +0000 (16:06 +0800)]
microblaze: Fix Makefile to delete build generated files

'make clean' does not to delete the following build generated file:
arch/microblaze/boot/linux.bin.ub

'make mrproper' does not to delete the following build generated files:
arch/microblaze/boot/simpleImage.*

Fix the Makefile to delete these build generated files.

See [1] for a discussion on why simpleImage.* files are deleted with 'make
mrproper' and not with 'make clean'.
[1] http://lkml.org/lkml/2010/3/12/96

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Add a missing single quote to make 'make help' happy
Arun Bhanu [Fri, 12 Mar 2010 08:31:40 +0000 (16:31 +0800)]
microblaze: Add a missing single quote to make 'make help' happy

'make ARCH=microblaze help' fails with the following error due to a
missing single quote.

/bin/sh: -c: line 0: unexpected EOF while looking for matching `''
/bin/sh: -c: line 1: syntax error: unexpected end of file
make: *** [help] Error 2

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix "kstack=" parsing
Steven J. Magnani [Wed, 24 Feb 2010 20:54:15 +0000 (14:54 -0600)]
microblaze: Fix "kstack=" parsing

The "kstack=" command line parameter is not parsed correctly.
All proper values are interpreted as zero.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agodrm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
Dave Airlie [Wed, 31 Mar 2010 03:41:35 +0000 (13:41 +1000)]
drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.

Some GPUs have an APM/ACPI PM mode selection switch and some BIOSes
set this to APM. We really want this in ACPI mode for Linux.

Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: rs400/480 should set common registers.
Dave Airlie [Wed, 31 Mar 2010 03:42:50 +0000 (13:42 +1000)]
drm/radeon/kms: rs400/480 should set common registers.

These GPUs should be setting these registers up also.

Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: add sanity check to wptr.
Dave Airlie [Wed, 31 Mar 2010 03:38:56 +0000 (13:38 +1000)]
drm/radeon/kms: add sanity check to wptr.

If we resume in a bad way, we'll get 0xffffffff in wptr, and then
oops with no console. This just adds a sanity check so that we can
avoid the oops and hopefully get more details out of people's systems.

Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/evergreen: get DP working
Alex Deucher [Wed, 31 Mar 2010 18:42:11 +0000 (14:42 -0400)]
drm/radeon/kms/evergreen: get DP working

Need to enable the VID stream after link training

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agosparc: Fix regset register window handling.
David S. Miller [Thu, 1 Apr 2010 01:05:05 +0000 (18:05 -0700)]
sparc: Fix regset register window handling.

We have to adjust 'reg_window' down by 16 becuase the 'pos' iterator
we'll use to index into the stack slots will be between 16 and 32.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoeeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
Yong Wang [Sun, 21 Mar 2010 02:26:34 +0000 (10:26 +0800)]
eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops

Add a WMI driver for Eee PC laptops. Currently it only supports hotkeys.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoasus-laptop: fix warning in asus_handle_init
Corentin Chary [Tue, 2 Mar 2010 21:24:12 +0000 (22:24 +0100)]
asus-laptop: fix warning in asus_handle_init

In function 'asus_laptop_get_info':
warning: passing argument 3 of 'asus_handle_init' from incompatible pointer type
note: expected 'char **' but argument is of type 'const char **'

Introduced by commit c21085108a02e1b838c34f3650c8cc9fbd178615
("asus-laptop: fix style problems reported by checkpath.pl").

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
14 years agofat: fix buffer overflow in vfat_create_shortname()
Nikolaus Schulz [Wed, 31 Mar 2010 17:21:10 +0000 (02:21 +0900)]
fat: fix buffer overflow in vfat_create_shortname()

When using the string representation of a random counter as part of the base
name, ensure that it is no longer than 4 bytes.

Since we are repeatedly decrementing the counter in a loop until we have found a
unique base name, the counter may wrap around zero; therefore, it is not enough
to mask its higher bits before entering the loop, this must be done inside the
loop.

[hirofumi@mail.parknet.co.jp: use snprintf()]
Signed-off-by: Nikolaus Schulz <microschulz@web.de>
Cc: stable@kernel.org
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrm/radeon/kms: add hw_i2c module option
Alex Deucher [Wed, 17 Mar 2010 06:07:37 +0000 (02:07 -0400)]
drm/radeon/kms: add hw_i2c module option

Turn off hw i2c by default except for mm i2c which
is hw only until we sort out the remaining prescale
issues on older chips.  hw i2c can be enabled with
hw_i2c=1.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
Alex Deucher [Sun, 14 Mar 2010 16:22:44 +0000 (12:22 -0400)]
drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks

This allows us to remove the internal bit algo bus used by
the radeon i2c algo.  We now register a radeon algo adapter
if the gpio line is hw capable and the hw inplementation is
available, otherwise we register a bit algo adapter.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoMerge branch 'v2.6.34-rc2' into drm-linus
Dave Airlie [Wed, 31 Mar 2010 04:55:14 +0000 (14:55 +1000)]
Merge branch 'v2.6.34-rc2' into drm-linus

14 years agodrm/radeon/kms: disable MSI on IGP chips
Alex Deucher [Tue, 30 Mar 2010 21:22:32 +0000 (17:22 -0400)]
drm/radeon/kms: disable MSI on IGP chips

Doesn't seem to work reliably and the pci quirks don't
always work.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: display watermark updates (v2)
Alex Deucher [Wed, 31 Mar 2010 04:33:27 +0000 (00:33 -0400)]
drm/radeon/kms: display watermark updates (v2)

- Add module option to force the display priority
  0 = auto, 1 = normal, 2 = high
- Default to high on r3xx/r4xx/rv515 chips
  Fixes flickering problems during heavy acceleration
  due to underflow to the display controllers
- Fill in minimal support for RS600

v2 - update display priority when bandwidth is updated
so the user can change the parameter at runtime and it
will take affect on the next modeset.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/dp: disable training pattern on the sink at the end of link training
Alex Deucher [Tue, 30 Mar 2010 06:03:48 +0000 (02:03 -0400)]
drm/radeon/kms/dp: disable training pattern on the sink at the end of link training

Seems to have gotten lost in the evergreen merge.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
Alex Deucher [Tue, 30 Mar 2010 01:37:08 +0000 (21:37 -0400)]
drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)

Some systems have LCD* rather than DFP* device tags in the bios
for eDP connectors; notably the new apple iMac. This fixes
things up so eDP connectors with either tag will work.

v2: fix typo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/dp: remove extraneous training complete call
Alex Deucher [Mon, 29 Mar 2010 18:06:10 +0000 (14:06 -0400)]
drm/radeon/kms/dp: remove extraneous training complete call

Looks like a copy/paste typo from when evergreen support
was added.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/atom: minor fixes to transmitter setup
Alex Deucher [Mon, 29 Mar 2010 21:39:44 +0000 (17:39 -0400)]
drm/radeon/kms/atom: minor fixes to transmitter setup

- 8 lane links are not valid for DP
- remove unused num var

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
Michel Dänzer [Fri, 26 Mar 2010 19:18:55 +0000 (19:18 +0000)]
drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.

This prevented radeon.test=1 from testing transfers from/to GTT beyond the
visible VRAM size.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm: fix build error when SYSRQ is disabled
Randy Dunlap [Thu, 25 Mar 2010 18:29:05 +0000 (18:29 +0000)]
drm: fix build error when SYSRQ is disabled

Fix build error when CONFIG_MAGIC_SYSRQ is not enabled:

drivers/gpu/drm/drm_fb_helper.c:915: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
drivers/gpu/drm/drm_fb_helper.c:929: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: fix macbookpro connector quirk
Alex Deucher [Fri, 26 Mar 2010 21:14:37 +0000 (17:14 -0400)]
drm/radeon/kms: fix macbookpro connector quirk

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/r6xx/r7xx: further safe reg clean up
Alex Deucher [Fri, 26 Mar 2010 23:36:33 +0000 (19:36 -0400)]
drm/radeon/r6xx/r7xx: further safe reg clean up

- remove a few more drm only regs
- remove sampler, alu, bool, loop constant regs.
  They are set via separate packet3's already

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
Alex Deucher [Fri, 26 Mar 2010 19:26:51 +0000 (15:26 -0400)]
drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: bump the version for r6xx/r7xx const buffer support
Alex Deucher [Fri, 26 Mar 2010 19:24:14 +0000 (15:24 -0400)]
drm/radeon/kms: bump the version for r6xx/r7xx const buffer support

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/r6xx/r7xx: CS parser fixes
Alex Deucher [Fri, 26 Mar 2010 18:52:32 +0000 (14:52 -0400)]
drm/radeon/r6xx/r7xx: CS parser fixes

- Drop some more safe regs taht userspace shouldn't hit
- Constant base regs need relocs.  This allows us to use
constant buffers rather than the constant register file.
Also we don't want userspace to be able to set arbitrary
mc base values for the const caches.
- Track SQ_CONFIG so we know whether userspace is using
the cfile or constant buffers.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
Alex Deucher [Wed, 24 Mar 2010 17:57:29 +0000 (13:57 -0400)]
drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/r600: remove some regs are not safe regs for command buffers
Alex Deucher [Wed, 24 Mar 2010 22:45:32 +0000 (18:45 -0400)]
drm/radeon/r600: remove some regs are not safe regs for command buffers

Only the drm should be touching them.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm: Return ENODEV if the inode mapping changes
Chris Wilson [Thu, 18 Mar 2010 11:56:54 +0000 (11:56 +0000)]
drm: Return ENODEV if the inode mapping changes

Replace a BUG_ON with an error code in the event that the inode mapping
changes between calls to drm_open. This may happen for instance if udev
is loaded subsequent to the original opening of the device:

[  644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146!
[  644.291876] invalid opcode: 0000 [#1] SMP
[  644.291882] last sysfs file: /sys/kernel/uevent_seqnum
[  644.291888]
[  644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220             /N150/N210/N220
[  644.291903] EIP: 0060:[<c11c70e3>] EFLAGS: 00210283 CPU: 0
[  644.291912] EIP is at drm_open+0x4b1/0x4e2
[  644.291918] EAX: f72d8d18 EBX: f790a400 ECX: f73176b8 EDX: 00000000
[  644.291923] ESI: f790a414 EDI: f790a414 EBP: f647ae20 ESP: f647adfc
[  644.291929]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  644.291937] Process lt-cairo-test-s (pid: 7276, ti=f647a000 task=f73f5c80 task.ti=f647a000)
[  644.291941] Stack:
[  644.291945]  00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8
[  644.291957] <0> c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5
[  644.291969] <0> f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6
[  644.291982] Call Trace:
[  644.291991]  [<c11c6c04>] ? drm_stub_open+0x8a/0xb8
[  644.292000]  [<c1080ac5>] ? chrdev_open+0xef/0x106
[  644.292008]  [<c107d1e6>] ? __dentry_open+0xd4/0x1a6
[  644.292015]  [<c107d35b>] ? nameidata_to_filp+0x31/0x45
[  644.292022]  [<c10809d6>] ? chrdev_open+0x0/0x106
[  644.292030]  [<c10864e2>] ? do_last+0x346/0x423
[  644.292037]  [<c108789f>] ? do_filp_open+0x190/0x415
[  644.292046]  [<c1071eb5>] ? handle_mm_fault+0x214/0x710
[  644.292053]  [<c107d008>] ? do_sys_open+0x4d/0xe9
[  644.292061]  [<c1016462>] ? do_page_fault+0x211/0x23f
[  644.292068]  [<c107d0f0>] ? sys_open+0x23/0x2b
[  644.292075]  [<c1002650>] ? sysenter_do_call+0x12/0x26
[  644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0
[  644.292143] EIP: [<c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:f647adfc
[  644.292175] ---[ end trace 2ddd476af89a60fa ]---

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: Fix NULL pointer dereference if memory allocation failed.
Pauli Nieminen [Fri, 19 Mar 2010 07:44:33 +0000 (07:44 +0000)]
drm/radeon/kms: Fix NULL pointer dereference if memory allocation failed.

When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs
is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini
when clean up code is trying to loop over the relocation array and free the
objects.

Fix adds a check for a possible NULL pointer in clean up code.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)
Jerome Glisse [Wed, 17 Mar 2010 14:44:29 +0000 (14:44 +0000)]
drm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)

radeon_gart_fini might call GART unbind callback function which
might try to access GART table but if gart_disable is call first
the GART table will be unmapped so any access to it will oops.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: don't print error on -ERESTARTSYS.
Dave Airlie [Fri, 19 Mar 2010 00:33:44 +0000 (10:33 +1000)]
drm/radeon/kms: don't print error on -ERESTARTSYS.

We can get this if the user moves the mouse when we are waiting to move
some stuff around in the validate. Don't fail.

Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/atom: make sure tables are valid (v2)
Alex Deucher [Thu, 18 Mar 2010 05:04:01 +0000 (01:04 -0400)]
drm/radeon/kms/atom: make sure tables are valid (v2)

Check that atom cmd and data tables are valid
before using them.

(v2)
- fix some whitespace errors noticed by Rafał Miłecki
- check a few more cases

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: remove lvds quirks
Alex Deucher [Wed, 17 Mar 2010 23:50:59 +0000 (19:50 -0400)]
drm/radeon/kms: remove lvds quirks

- no longer needed with the latest new pll algo fixes.
- also don't use lcd pll limits.  They don't seem
to work well for all systems.  If we have a case where
they are useful, we can set the flag for that case.

fixes fdo bug 27083

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: fix display bandwidth setup on rs4xx
Alex Deucher [Sun, 21 Mar 2010 15:09:24 +0000 (11:09 -0400)]
drm/radeon/kms: fix display bandwidth setup on rs4xx

I missed rs4xx in 7f1e613daf0fdd0884316ab25a749db3c671329e

Fixes fdo bug 27219.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: never treat rs4xx as AGP
Alex Deucher [Sun, 21 Mar 2010 18:02:25 +0000 (14:02 -0400)]
drm/radeon/kms: never treat rs4xx as AGP

RS4xx+ IGP chips use an internal gart, however,
some of them have the agp cap bits set in their pci
configs.  Make sure to clear the AGP flag as AGP will
not work with them.

Should fix fdo bug 27225

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: display watermark fixes
Alex Deucher [Wed, 17 Mar 2010 00:54:38 +0000 (20:54 -0400)]
drm/radeon/kms: display watermark fixes

- rs780/880 were using the wrong bandwidth functions
- convert r1xx-r4xx to use the same pm sclk/mclk structs as
r5xx+
- move bandwidth setup to a common function

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: init rdev->num_crtc at asic init
Alex Deucher [Tue, 16 Mar 2010 21:08:06 +0000 (17:08 -0400)]
drm/radeon/kms: init rdev->num_crtc at asic init

Replace hardcoded numbers with rdev->num_crtc.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/pm: fix typo in power table parsing
Alex Deucher [Mon, 15 Mar 2010 05:36:32 +0000 (01:36 -0400)]
drm/radeon/kms/pm: fix typo in power table parsing

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms: gfx init fixes for r6xx/r7xx
Alex Deucher [Fri, 5 Mar 2010 19:50:37 +0000 (14:50 -0500)]
drm/radeon/kms: gfx init fixes for r6xx/r7xx

This fixes some issues with the last gfx init patch.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agodrm/radeon/kms/pm: fix segfault in clock code
Alex Deucher [Sun, 14 Mar 2010 20:31:36 +0000 (16:31 -0400)]
drm/radeon/kms/pm: fix segfault in clock code

Make sure we have a crtc assigned to the encoder
before dereferencing it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
14 years agodrm/radeon/kms: expose thermal/fan i2c buses
Alex Deucher [Thu, 11 Mar 2010 15:01:17 +0000 (10:01 -0500)]
drm/radeon/kms: expose thermal/fan i2c buses

Look up i2c bus in the power table and expose it.
You'll need to load a hwmon driver for any chips
on the bus, this patch just exposes the bus.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>