xen/xenbus: use apply_to_page_range directly in xenbus_map_ring_pv

Replacing alloc_vm_area with get_vm_area_caller + apply_page_range allows
to fill put the phys_addr values directly instead of doing another loop
over all addresses.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-10-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915: use vmap in i915_gem_object_map

i915_gem_object_map implements fairly low-level vmap functionality in a
driver.  Split it into two helpers, one for remapping kernel memory which
can use vmap, and one for I/O memory that uses vmap_pfn.

The only practical difference is that alloc_vm_area prefeaults the vmalloc
area PTEs, which doesn't seem to be required here for the kernel memory
case (and could be added to vmap using a flag if actually required).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-9-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915: stop using kmap in i915_gem_object_map

kmap for !PageHighmem is just a convoluted way to say page_address, and
kunmap is a no-op in that case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915: use vmap in shmem_pin_map

shmem_pin_map somewhat awkwardly reimplements vmap using alloc_vm_area and
manual pte setup.  The only practical difference is that alloc_vm_area
prefeaults the vmalloc area PTEs, which doesn't seem to be required here
(and could be added to vmap using a flag if actually required).  Switch to
use vmap, and use vfree to free both the vmalloc mapping and the page
array, as well as dropping the references to each page.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: switch from alloc_vm_area to get_vm_area

Just manually pre-fault the PTEs using apply_to_page_range.

Co-developed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: allow a NULL fn callback in apply_to_page_range

Besides calling the callback on each page, apply_to_page_range also has
the effect of pre-faulting all PTEs for the range.  To support callers
that only need the pre-faulting, make the callback optional.

Based on a patch from Minchan Kim <minchan@kernel.org>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add a vmap_pfn function

Add a proper helper to remap PFNs into kernel virtual space so that
drivers don't have to abuse alloc_vm_area and open coded PTE manipulation
for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add a VM_MAP_PUT_PAGES flag for vmap

Add a flag so that vmap takes ownership of the passed in page array.  When
vfree is called on such an allocation it will put one reference on each
page, and free the page array itself.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: update the documentation for vfree

Patch series "remove alloc_vm_area", v4.

This series removes alloc_vm_area, which was left over from the big
vmalloc interface rework.  It is a rather arkane interface, basicaly the
equivalent of get_vm_area + actually faulting in all PTEs in the allocated
area.  It was originally addeds for Xen (which isn't modular to start
with), and then grew users in zsmalloc and i915 which seems to mostly
qualify as abuses of the interface, especially for i915 as a random driver
should not set up PTE bits directly.

This patch (of 11):

 * Document that you can call vfree() on an address returned from vmap()
 * Remove the note about the minimum size -- the minimum size of a vmalloc
   allocation is one page
 * Add a Context: section
 * Fix capitalisation
 * Reword the prohibition on calling from NMI context to avoid a double
   negative

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-1-hch@lst.de
Link: https://lkml.kernel.org/r/20201002122204.1534411-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/madvise: introduce process_madvise() syscall: an external memory hinting API

There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.

The information required to make the reclaim decision is not known to the
app.  Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.

To solve the issue, this patch introduces a new syscall
process_madvise(2).  It uses pidfd of an external process to give the
hint.  It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement.  I
think it would be bigger in real practice because the testing ran very
cache friendly environment).

Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations.  In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment.  With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.

ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.

I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky.  Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone.  Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.

If someone want to add other hints, we could hear the usecase and review
it for each hint.  It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.

So finally, the API is as follows,

      ssize_t process_madvise(int pidfd, const struct iovec *iovec,
                unsigned long vlen, int advice, unsigned int flags);

    DESCRIPTION
      The process_madvise() system call is used to give advice or directions
      to the kernel about the address ranges from external process as well as
      local process. It provides the advice to address ranges of process
      described by iovec and vlen. The goal of such advice is to improve
      system or application performance.

      The pidfd selects the process referred to by the PID file descriptor
      specified in pidfd. (See pidofd_open(2) for further information)

      The pointer iovec points to an array of iovec structures, defined in
      <sys/uio.h> as:

        struct iovec {
            void *iov_base;         /* starting address */
            size_t iov_len;         /* number of bytes to be advised */
        };

      The iovec describes address ranges beginning at address(iov_base)
      and with size length of bytes(iov_len).

      The vlen represents the number of elements in iovec.

      The advice is indicated in the advice argument, which is one of the
      following at this moment if the target process specified by pidfd is
      external.

        MADV_COLD
        MADV_PAGEOUT

      Permission to provide a hint to external process is governed by a
      ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).

      The process_madvise supports every advice madvise(2) has if target
      process is in same thread group with calling process so user could
      use process_madvise(2) to extend existing madvise(2) to support
      vector address ranges.

    RETURN VALUE
      On success, process_madvise() returns the number of bytes advised.
      This return value may be less than the total number of requested
      bytes, if an error occurred. The caller should check return value
      to determine whether a partial advice occurred.

FAQ:

Q.1 - Why does any external entity have better knowledge?

Quote from Sandeep

"For Android, every application (including the special SystemServer)
are forked from Zygote.  The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.

After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.

In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.

So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.

Besides, we can never rely on applications to clean things up
themselves.  We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.

So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.

- ssp

Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?

process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called.  If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect.  It's the
responsibility of the process calling process_madvise to close this
race condition.  For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called.  Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process.  Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm.  The suggested API itself does not provide synchronization.  It
also apply other APIs like move_pages, process_vm_write.

The race isn't really a problem though.  Why is it so wrong to require
that callers do their own synchronization in some manner?  Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something.  Think about mmap.  It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before.  That's where we need synchronization by using other API or
design from userside.  It shouldn't be part of API itself.  If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3].  Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.

To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.

Q.3 - Why doesn't ptrace work?

Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA.  Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill.  It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.

[1] https://developer.android.com/topic/performance/memory"

[2] process_getinfo for getting the cookie which is updated whenever
    vma of process address layout are changed - Daniel Colascione -
    https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224

[3] anonymous fd which is used for the object(i.e., address range)
    validation - Michal Hocko -
    https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/

[minchan@kernel.org: fix process_madvise build break for arm64]
Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pid: move pidfd_get_pid() to pid.c

process_madvise syscall needs pidfd_get_pid function to translate pidfd to
pid so this patch move the function to kernel/pid.c.

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jann Horn <jannh@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-5-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-3-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-3-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/madvise: pass mm to do_madvise

Patch series "introduce memory hinting API for external process", v9.

Now, we have MADV_PAGEOUT and MADV_COLD as madvise hinting API.  With
that, application could give hints to kernel what memory range are
preferred to be reclaimed.  However, in some platform(e.g., Android), the
information required to make the hinting decision is not known to the app.
Instead, it is known to a centralized userspace daemon(e.g.,
ActivityManagerService), and that daemon must be able to initiate reclaim
on its own without any app involvement.

To solve the concern, this patch introduces new syscall -
process_madvise(2).  Bascially, it's same with madvise(2) syscall but it
has some differences.

1. It needs pidfd of target process to provide the hint

2. It supports only MADV_{COLD|PAGEOUT|MERGEABLE|UNMEREABLE} at this
   moment.  Other hints in madvise will be opened when there are explicit
   requests from community to prevent unexpected bugs we couldn't support.

3. Only privileged processes can do something for other process's
   address space.

For more detail of the new API, please see "mm: introduce external memory
hinting API" description in this patchset.

This patch (of 3):

In upcoming patches, do_madvise will be called from external process
context so we shouldn't asssume "current" is always hinted process's
task_struct.

Furthermore, we must not access mm_struct via task->mm, but obtain it via
access_mm() once (in the following patch) and only use that pointer [1],
so pass it to do_madvise() as well.  Note the vma->vm_mm pointers are
safe, so we can use them further down the call stack.

And let's pass current->mm as arguments of do_madvise so it shouldn't
change existing behavior but prepare next patch to make review easy.

[vbabka@suse.cz: changelog tweak]
[minchan@kernel.org: use current->mm for io_uring]
Link: http://lkml.kernel.org/r/20200423145215.72666-1-minchan@kernel.org
[akpm@linux-foundation.org: fix it for upstream changes]
[akpm@linux-foundation.org: whoops]
[rdunlap@infradead.org: add missing includes]

Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jann Horn <jannh@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Dias <joaodias@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200901000633.1920247-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200302193630.68771-2-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-2-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-2-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: 10x speedup for hmm-tests

This patch reduces the running time for hmm-tests from about 10+ seconds,
to just under 1.0 second, for an approximately 10x speedup.  That brings
it in line with most of the other tests in selftests/vm, which mostly run
in < 1 sec.

This is done with a one-line change that simply reduces the number of
iterations of several tests, from 256, to 10.  Thanks to Ralph Campbell
for suggesting changing NTIMES as a way to get the speedup.

Suggested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/20201003011721.44238-1-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_elf: take the mmap lock around find_extend_vma()

create_elf_tables() runs after setup_new_exec(), so other tasks can
already access our new mm and do things like process_madvise() on it.  (At
the time I'm writing this commit, process_madvise() is not in mainline
yet, but has been in akpm's tree for some time.)

While I believe that there are currently no APIs that would actually allow
another process to mess up our VMA tree (process_madvise() is limited to
MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm
under which no syscalls have been executed yet), this seems like an
accident waiting to happen.

Let's make sure that we always take the mmap lock around GUP paths as long
as another process might be able to see the mm.

(Yes, this diff looks suspicious because we drop the lock before doing
anything with `vma`, but that's because we actually don't do anything with
it apart from the NULL check.)

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lkml.kernel.org/r/CAG48ez1-PBCdv3y8pn-Ty-b+FmBSLwDuVKFSt8h7wARLy0dF-Q@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup_benchmark: take the mmap lock around GUP

To be safe against concurrent changes to the VMA tree, we must take the
mmap lock around GUP operations (excluding the GUP-fast family of
operations, which will take the mmap lock by themselves if necessary).

This code is only for testing, and it's only reachable by root through
debugfs, so this doesn't really have any impact; however, if we want to
add lockdep asserts into the GUP path, we need to have clean locking here.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lkml.kernel.org/r/CAG48ez3SG6ngZLtasxJ6LABpOnqCz5-QHqb0B4k44TQ8F9n6+w@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: add inline munmap_vma_range() for code readability

There are two locations that have a block of code for munmapping a vma
range.  Change those two locations to use a function and add meaningful
comments about what happens to the arguments, which was unclear in the
previous code.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200818154707.2515169-2-Liam.Howlett@Oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: add inline vma_next() for readability of mmap code

There are three places that the next vma is required which uses the same
block of code.  Replace the block with a function and add comments on what
happens in the case where NULL is encountered.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200818154707.2515169-1-Liam.Howlett@Oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: avoid possible unnecessary process right check in kernel_move_pages()

There is no need to check if this process has the right to modify the
specified process when they are same.  And we could also skip the security
hook call if a process is modifying its own pages.  Add helper function to
handle these.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christopher Lameter <cl@linux.com>
Link: https://lkml.kernel.org/r/20200819083331.19012-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: remove a wrapper for alloc_migration_target()

To calculate the correct node to migrate the page for hotplug, we need to
check node id of the page.  Wrapper for alloc_migration_target() exists
for this purpose.

However, Vlastimil informs that all migration source pages come from a
single node.  In this case, we don't need to check the node id for each
page and we don't need to re-set the target nodemask for each page by
using the wrapper.  Set up the migration_target_control once and use it
for all pages.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-10-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory-failure: remove a wrapper for alloc_migration_target()

There is a well-defined standard migration target callback.  Use it
directly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-9-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kmem: enable kernel memcg accounting from interrupt contexts

If a memcg to charge can be determined (using remote charging API), there
are no reasons to exclude allocations made from an interrupt context from
the accounting.

Such allocations will pass even if the resulting memcg size will exceed
the hard limit, but it will affect the application of the memory pressure
and an inability to put the workload under the limit will eventually
trigger the OOM.

To use active_memcg() helper, memcg_kmem_bypass() is moved back to
memcontrol.c.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kmem: prepare remote memcg charging infra for interrupt contexts

Remote memcg charging API uses current->active_memcg to store the
currently active memory cgroup, which overwrites the memory cgroup of the
current process.  It works well for normal contexts, but doesn't work for
interrupt contexts: indeed, if an interrupt occurs during the execution of
a section with an active memcg set, all allocations inside the interrupt
will be charged to the active memcg set (given that we'll enable
accounting for allocations from an interrupt context).  But because the
interrupt might have no relation to the active memcg set outside, it's
obviously wrong from the accounting prospective.

To resolve this problem, let's add a global percpu int_active_memcg
variable, which will be used to store an active memory cgroup which will
be used from interrupt contexts.  set_active_memcg() will transparently
use current->active_memcg or int_active_memcg depending on the context.

To make the read part simple and transparent for the caller, let's
introduce two new functions:
  - struct mem_cgroup *active_memcg(void),
  - struct mem_cgroup *get_active_memcg(void).

They are returning the active memcg if it's set, hiding all implementation
details: where to get it depending on the current context.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kmem: remove redundant checks from get_obj_cgroup_from_current()

There are checks for current->mm and current->active_memcg in
get_obj_cgroup_from_current(), but these checks are redundant:
memcg_kmem_bypass() called just above performs same checks.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kmem: move memcg_kmem_bypass() calls to get_mem/obj_cgroup_from_current()

Patch series "mm: kmem: kernel memory accounting in an interrupt context".

This patchset implements memcg-based memory accounting of allocations made
from an interrupt context.

Historically, such allocations were passed unaccounted mostly because
charging the memory cgroup of the current process wasn't an option.  Also
performance reasons were likely a reason too.

The remote charging API allows to temporarily overwrite the currently
active memory cgroup, so that all memory allocations are accounted towards
some specified memory cgroup instead of the memory cgroup of the current
process.

This patchset extends the remote charging API so that it can be used from
an interrupt context.  Then it removes the fence that prevented the
accounting of allocations made from an interrupt context.  It also
contains a couple of optimizations/code refactorings.

This patchset doesn't directly enable accounting for any specific
allocations, but prepares the code base for it.  The bpf memory accounting
will likely be the first user of it: a typical example is a bpf program
parsing an incoming network packet, which allocates an entry in hashmap
map to store some information.

This patch (of 4):

Currently memcg_kmem_bypass() is called before obtaining the current
memory/obj cgroup using get_mem/obj_cgroup_from_current().  Moving
memcg_kmem_bypass() into get_mem/obj_cgroup_from_current() reduces the
number of call sites and allows further code simplifications.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200827225843.1270629-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: rework remote charging API to support nesting

Currently the remote memcg charging API consists of two functions:
memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the
memcg value, which overwrites the memcg of the current task.

  memalloc_use_memcg(target_memcg);
  <...>
  memalloc_unuse_memcg();

It works perfectly for allocations performed from a normal context,
however an attempt to call it from an interrupt context or just nest two
remote charging blocks will lead to an incorrect accounting.  On exit from
the inner block the active memcg will be cleared instead of being
restored.

  memalloc_use_memcg(target_memcg);

  memalloc_use_memcg(target_memcg_2);
    <...>
    memalloc_unuse_memcg();

    Error: allocation here are charged to the memcg of the current
    process instead of target_memcg.

  memalloc_unuse_memcg();

This patch extends the remote charging API by switching to a single
function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg),
which sets the new value and returns the old one.  So a remote charging
block will look like:

  old_memcg = set_active_memcg(target_memcg);
  <...>
  set_active_memcg(old_memcg);

This patch is heavily based on the patch by Johannes Weiner, which can be
found here: https://lkml.org/lkml/2020/5/28/806 .

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <dschatzberg@fb.com>
Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: fix build error with !COREDUMP

Fix linkage error when CONFIG_BINFMT_ELF is selected but CONFIG_COREDUMP
is not:

    ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_phdrs':
    elfcore.c:(.text+0x172): undefined reference to `dump_emit'
    ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_data':
    elfcore.c:(.text+0x2b2): undefined reference to `dump_emit'

Fixes: 1fcccbac89f5 ("elf coredump: replace ELF_CORE_EXTRA_* macros by functions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200819064146.12529-1-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-for-v5.10-2020-10-15' of git://git./linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:

 - cgroup improvements for 'perf stat', allowing for compact
   specification of events and cgroups in the command line.

 - Support per thread topdown metrics in 'perf stat'.

 - Support sample-read topdown metric group in 'perf record'

 - Show start of latency in addition to its start in 'perf sched
   latency'.

 - Add min, max to 'perf script' futex-contention output, in addition to
   avg.

 - Allow usage of 'perf_event_attr->exclusive' attribute via the new
   ':e' event modifier.

 - Add 'snapshot' command to 'perf record --control', using it with
   Intel PT.

 - Support FIFO file names as alternative options to 'perf record
   --control'.

 - Introduce branch history "streams", to compare 'perf record' runs
   with 'perf diff' based on branch records and report hot streams.

 - Support PE executable symbol tables using libbfd, to profile, for
   instance, wine binaries.

 - Add filter support for option 'perf ftrace -F/--funcs'.

 - Allow configuring the 'disassembler_style' 'perf annotate' knob via
   'perf config'

 - Update CascadelakeX and SkylakeX JSON vendor events files.

 - Add support for parsing perchip/percore JSON vendor events.

 - Add power9 hv_24x7 core level metric events.

 - Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD
   zen1.

 - Enable Family 19h users by matching Zen2 AMD vendor events.

 - Use debuginfod in 'perf probe' when required debug files not found
   locally.

 - Display negative tid in non-sample events in 'perf script'.

 - Make GTK2 support opt-in

 - Add build test with GTK+

 - Add missing -lzstd to the fast path feature detection

 - Add scripts to auto generate 'mmap', 'mremap' string<->id tables for
   use in 'perf trace'.

 - Show python test script in verbose mode.

 - Fix uncore metric expressions

 - Msan uninitialized use fixes.

 - Use condition variables in 'perf bench numa'

 - Autodetect python3 binary in systems without python2.

 - Support md5 build ids in addition to sha1.

 - Add build id 'perf test' regression test.

 - Fix printable strings in python3 scripts.

 - Fix off by ones in 'perf trace' in arches using libaudit.

 - Fix JSON event code for events referencing std arch events.

 - Introduce 'perf test' shell script for Arm CoreSight testing.

 - Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
   event and in 'perf test tsc'.

 - 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores",
   fixes and documentation update.

 - Fix usage of reloc_sym in 'perf probe' when using both kallsyms and
   debuginfo files.

 - Do not print 'Metric Groups:' unnecessarily in 'perf list'

 - Refcounting fixes in the event parsing code.

 - Add expand cgroup event 'perf test' entry.

 - Fix out of bounds CPU map access when handling armv8_pmu events in
   'perf stat'.

 - Add build-id injection 'perf bench' benchmark.

 - Enter namespace when reading build-id in 'perf inject'.

 - Do not load map/dso when injecting build-id speeding up the 'perf
   inject' process.

 - Add --buildid-all option to avoid processing all samples, just the
   mmap metadata events.

 - Add feature test to check if libbfd has buildid support

 - Add 'perf test' entry for PE binary format support.

 - Fix typos in power8 PMU vendor events JSON files.

 - Hide libtraceevent non API functions.

* tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits)
  perf c2c: Update documentation for metrics reorganization
  perf c2c: Add metrics "RMT Load Hit"
  perf c2c: Correct LLC load hit metrics
  perf c2c: Change header for LLC local hit
  perf c2c: Use more explicit headers for HITM
  perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"
  perf c2c: Organize metrics based on memory hierarchy
  perf c2c: Display "Total Stores" as a standalone metrics
  perf c2c: Display the total numbers continuously
  perf bench: Use condition variables in numa.
  perf jevents: Fix event code for events referencing std arch events
  perf diff: Support hot streams comparison
  perf streams: Report hot streams
  perf streams: Calculate the sum of total streams hits
  perf streams: Link stream pair
  perf streams: Compare two streams
  perf streams: Get the evsel_streams by evsel_idx
  perf streams: Introduce branch history "streams"
  perf intel-pt: Improve PT documentation slightly
  perf tools: Add support for exclusive groups/events
  ...

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A usual cycle for RDMA with a typical mix of driver and core subsystem
  updates:

   - Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
     hns, usnic, qib, qedr, cxgb4, hns, bnxt_re

   - Various rtrs fixes and updates

   - Bug fix for mlx4 CM emulation for virtualization scenarios where
     MRA wasn't working right

   - Use tracepoints instead of pr_debug in the CM code

   - Scrub the locking in ucma and cma to close more syzkaller bugs

   - Use tasklet_setup in the subsystem

   - Revert the idea that 'destroy' operations are not allowed to fail
     at the driver level. This proved unworkable from a HW perspective.

   - Revise how the umem API works so drivers make fewer mistakes using
     it

   - XRC support for qedr

   - Convert uverbs objects RWQ and MW to new the allocation scheme

   - Large queue entry sizes for hns

   - Use hmm_range_fault() for mlx5 On Demand Paging

   - uverbs APIs to inspect the GID table instead of sysfs

   - Move some of the RDMA code for building large page SGLs into
     lib/scatterlist"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
  RDMA/ucma: Fix use after free in destroy id flow
  RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
  RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
  RDMA: Explicitly pass in the dma_device to ib_register_device
  lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
  IB/mlx4: Convert rej_tmout radix-tree to XArray
  RDMA/rxe: Fix bug rejecting all multicast packets
  RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
  RDMA/rxe: Remove duplicate entries in struct rxe_mr
  IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
  IB/rdmavt: Fix sizeof mismatch
  MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
  RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
  RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
  RDMA/umem: Move to allocate SG table from pages
  lib/scatterlist: Add support in dynamic allocation of SG table from pages
  tools/testing/scatterlist: Show errors in human readable form
  tools/testing/scatterlist: Rejuvenate bit-rotten test
  RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
  RDMA/uverbs: Expose the new GID query API to user space
  ...

Merge tag 'i3c/for-5.10' of git://git./linux/kernel/git/i3c/linux

Pull i3c updates from Boris Brezillon:

 - Fix DAA for the pre-reserved address case

 - Fix an error path in the cadence driver

* tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: Fix error return in cdns_i3c_master_probe()
  i3c: master: fix for SETDASA and DAA process
  i3c: master add i3c_master_attach_boardinfo to preserve boardinfo

Merge tag 'mtd/for-5.10' of git://git./linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
   - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
   - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  HyperBus changes:
   - DMA support for TI's AM654 HyperBus controller driver.
   - HyperBus frontend driver for Renesas RPC-IF driver.

  SPI NOR core changes:
   - Support for Winbond w25q64jwm flash
   - Enable 4K sector support for mx25l12805d

  SPI NOR controller drivers changes:
   - intel-spi Add Alder Lake-S PCI ID

  MTD Core changes:
   - mtdoops: Don't run panic write twice
   - mtdconcat: Correctly handle panic write
   - Use DEFINE_SHOW_ATTRIBUTE"

* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
  mtd: hyperbus: add Renesas RPC-IF driver
  Revert "mtd: spi-nor: Prefer asynchronous probe"
  mtd: parsers: bcm63xx: Do not make it modular
  mtd: spear_smi: Enable compile testing
  mtd: maps: vmu-flash: fix typos for struct memcard
  mtd: physmap: Add Baikal-T1 physically mapped ROM support
  mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
  mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
  mtd: rawnand: cadence: remove a redundant dev_err call
  mtd: rawnand: ams-delta: Fix non-OF build warning
  mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
  mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
  mtd: rawnand: atmel: Check return values for nand_read_data_op
  mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
  mtd: rawnand: qcom: Simplify with dev_err_probe()
  mtd: rawnand: marvell: Fix and update kerneldoc
  mtd: rawnand: marvell: Simplify with dev_err_probe()
  mtd: rawnand: gpmi: Simplify with dev_err_probe()
  mtd: rawnand: atmel: Simplify with dev_err_probe()
  ...

Merge tag 'thermal-v5.10-rc1' of git://git./linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Fix Kconfig typo "acces" -> "access" (Colin Ian King)

 - Use dev_error_probe() to simplify the error handling on imx and imx8
   platforms (Anson Huang)

 - Use dedicated kobj_to_dev() instead of container_of() in the sysfs
   core code (Tian Tao)

 - Fix coding style by adding braces to a one line conditional statement
   on rcar (Geert Uytterhoeven)

 - Add DT binding documentation for the r8a774e1 platform and update the
   Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar)

 - Simplify the return expression of stm_thermal_prepare on the stm32
   platform (Qinglang Miao)

 - Fix the unit in the function documentation for the idle injection
   cooling device (Zhuguang Qing)

 - Remove an unecessary mutex_init() in the core code (Qinglang Miao)

 - Add support for keep alive events in the core code and the specific
   int340x (Srinivas Pandruvada)

 - Remove unused thermal zone variable in devfreq and cpufreq cooling
   devices (Zhuguang Qing)

 - Add the A100's THS controller support (Yangtao Li)

 - Add power management on the omap3's bandgap sensor (Adam Ford)

 - Fix a missing nlmsg_free in the netlink core error path (Jing
   Xiangfeng)

* tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()
  thermal: ti-soc-thermal: Enable addition power management
  thermal: sun8i: Add A100's THS controller support
  thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate
  dt-bindings: thermal: sun8i: Add binding for A100's THS controller
  thermal: cooling: Remove unused variable *tz
  thermal: int340x: Add keep alive response method
  thermal: core: Add new event for sending keep alive notifications
  thermal: int340x: Provide notification for OEM variable change
  thermal: core: remove unnecessary mutex_init()
  thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns
  thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config
  thermal: stm32: simplify the return expression of stm_thermal_prepare()
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
  thermal: rcar_thermal: Add missing braces to conditional statement
  thermal: Use kobj_to_dev() instead of container_of()
  thermal: imx8mm: Use dev_err_probe() to simplify error handling
  thermal: imx: Use dev_err_probe() to simplify error handling
  drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"

Merge tag 'ovl-update-5.10' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:

 - Improve performance for certain container setups by introducing a
   "volatile" mode

 - ioctl improvements

 - continue preparation for unprivileged overlay mounts

* tag 'ovl-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: use generic vfs_ioc_setflags_prepare() helper
  ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories
  ovl: rearrange ovl_can_list()
  ovl: enumerate private xattrs
  ovl: pass ovl_fs down to functions accessing private xattrs
  ovl: drop flags argument from ovl_do_setxattr()
  ovl: adhere to the vfs_ vs. ovl_do_ conventions for xattrs
  ovl: use ovl_do_getxattr() for private xattr
  ovl: fold ovl_getxattr() into ovl_get_redirect_xattr()
  ovl: clean up ovl_getxattr() in copy_up.c
  duplicate ovl_getxattr()
  ovl: provide a mount option "volatile"
  ovl: check for incompatible features in work dir

Merge tag 'afs-fixes-20201016' of git://git./linux/kernel/git/dhowells/linux-fs

Pull afs updates from David Howells:
 "A collection of fixes to fix afs_cell struct refcounting, thereby
  fixing a slew of related syzbot bugs:

   - Fix the cell tree in the netns to use an rwsem rather than RCU.

     There seem to be some problems deriving from the use of RCU and a
     seqlock to walk the rbtree, but it's not entirely clear what since
     there are several different failures being seen.

     Changing things to use an rwsem instead makes it more robust. The
     extra performance derived from using RCU isn't necessary in this
     case since the only time we're looking up a cell is during mount or
     when cells are being manually added.

   - Fix the refcounting by splitting the usage counter into a memory
     refcount and an active users counter. The usage counter was doing
     double duty, keeping track of whether a cell is still in use and
     keeping track of when it needs to be destroyed - but this makes the
     clean up tricky. Separating these out simplifies the logic.

   - Fix purging a cell that has an alias. A cell alias pins the cell
     it's an alias of, but the alias is always later in the list. Trying
     to purge in a single pass causes rmmod to hang in such a case.

   - Fix cell removal. If a cell's manager is requeued whilst it's
     removing itself, the manager will run again and re-remove itself,
     causing problems in various places. Follow Hillf Danton's
     suggestion to insert a more terminal state that causes the manager
     to do nothing post-removal.

  In additional to the above, two other changes:

   - Add a tracepoint for the cell refcount and active users count. This
     helped with debugging the above and may be useful again in future.

   - Downgrade an assertion to a print when a still-active server is
     seen during purging. This was happening as a consequence of
     incomplete cell removal before the servers were cleaned up"

* tag 'afs-fixes-20201016' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Don't assert on unpurgeable server records
  afs: Add tracing for cell refcount and active user count
  afs: Fix cell removal
  afs: Fix cell purging with aliases
  afs: Fix cell refcounting by splitting the usage counter
  afs: Fix rapid cell addition/removal by not using RCU on cells tree

Merge tag 'f2fs-for-5.10-rc1' of git://git./linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added new features such as zone capacity for ZNS
  and a new GC policy, ATGC, along with in-memory segment management. In
  addition, we could improve the decompression speed significantly by
  changing virtual mapping method. Even though we've fixed lots of small
  bugs in compression support, I feel that it becomes more stable so
  that I could give it a try in production.

  Enhancements:
   - suport zone capacity in NVMe Zoned Namespace devices
   - introduce in-memory current segment management
   - add standart casefolding support
   - support age threshold based garbage collection
   - improve decompression speed by changing virtual mapping method

  Bug fixes:
   - fix condition checks in some ioctl() such as compression, move_range, etc
   - fix 32/64bits support in data structures
   - fix memory allocation in zstd decompress
   - add some boundary checks to avoid kernel panic on corrupted image
   - fix disallowing compression for non-empty file
   - fix slab leakage of compressed block writes

  In addition, it includes code refactoring for better readability and
  minor bug fixes for compression and zoned device support"

* tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
  f2fs: code cleanup by removing unnecessary check
  f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
  f2fs: fix writecount false positive in releasing compress blocks
  f2fs: introduce check_swap_activate_fast()
  f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case
  f2fs: handle errors of f2fs_get_meta_page_nofail
  f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode
  f2fs: reject CASEFOLD inode flag without casefold feature
  f2fs: fix memory alignment to support 32bit
  f2fs: fix slab leak of rpages pointer
  f2fs: compress: fix to disallow enabling compress on non-empty file
  f2fs: compress: introduce cic/dic slab cache
  f2fs: compress: introduce page array slab cache
  f2fs: fix to do sanity check on segment/section count
  f2fs: fix to check segment boundary during SIT page readahead
  f2fs: fix uninit-value in f2fs_lookup
  f2fs: remove unneeded parameter in find_in_block()
  f2fs: fix wrong total_sections check and fsmeta check
  f2fs: remove duplicated code in sanity_check_area_boundary
  f2fs: remove unused check on version_bitmap
  ...

Merge tag 'docs/v5.10-1' of git://git./linux/kernel/git/mchehab/linux-media

Pull documentation updates from Mauro Carvalho Chehab:
 "A series of patches addressing warnings produced by make htmldocs.
  This includes:

   - kernel-doc markup fixes

   - ReST fixes

   - Updates at the build system in order to support newer versions of
     the docs build toolchain (Sphinx)

  After this series, the number of html build warnings should reduce
  significantly, and building with Sphinx 3.1 or later should now be
  supported (although it is still recommended to use Sphinx 2.4.4).

  As agreed with Jon, I should be sending you a late pull request by the
  end of the merge window addressing remaining issues with docs build,
  as there are a number of warning fixes that depends on pull requests
  that should be happening along the merge window.

  The end goal is to have a clean htmldocs build on Kernel 5.10.

  PS. It should be noticed that Sphinx 3.0 is not currently supported,
  as it lacks support for C domain namespaces. Such feature, needed in
  order to document uAPI system calls with Sphinx 3.x, was added only on
  Sphinx 3.1"

* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
  PM / devfreq: remove a duplicated kernel-doc markup
  mm/doc: fix a literal block markup
  workqueue: fix a kernel-doc warning
  docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
  Input: sparse-keymap: add a description for @sw
  rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
  nl80211: docs: add a description for s1g_cap parameter
  usb: docs: document altmode register/unregister functions
  kunit: test.h: fix a bad kernel-doc markup
  drivers: core: fix kernel-doc markup for dev_err_probe()
  docs: bio: fix a kerneldoc markup
  kunit: test.h: solve kernel-doc warnings
  block: bio: fix a warning at the kernel-doc markups
  docs: powerpc: syscall64-abi.rst: fix a malformed table
  drivers: net: hamradio: fix document location
  net: appletalk: Kconfig: Fix docs location
  dt-bindings: fix references to files converted to yaml
  memblock: get rid of a :c:type leftover
  math64.h: kernel-docs: Convert some markups into normal comments
  media: uAPI: buffer.rst: remove a left-over documentation
  ...

Merge tag 'trace-v5.10-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Fix mismatch section of adding early trace events.

  Fixes the issue of a mismatch section that was missed due to gcc
  inlining the offending function, while clang did not (and reported the
  issue)"

* tag 'trace-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Remove __init from __trace_early_add_new_event()

Merge tag 'printk-for-5.10-fixup' of git://git./linux/kernel/git/printk/linux

Pull printk fix from Petr Mladek:
 "Prevent overflow in the new lockless ringbuffer"

* tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: ringbuffer: Wrong data pointer when appending small string

Merge tag 'kgdb-5.10-rc1' of git://git./linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
 "A fairly modest set of changes for this cycle.

  Of particular note are an earlycon fix from Doug Anderson and my own
  changes to get kgdb/kdb to honour the kprobe blocklist. The later
  creates a safety rail that strongly encourages developers not to place
  breakpoints in, for example, arch specific trap handling code.

  Also included are a couple of small fixes and tweaks: an API update,
  eliminate a coverity dead code warning, improved handling of search
  during multi-line printk and a couple of typo corrections"

* tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Fix pager search for multi-line strings
  kernel: debug: Centralize dbg_[de]activate_sw_breakpoints
  kgdb: Add NOKPROBE labels on the trap handler functions
  kgdb: Honour the kprobe blocklist when setting breakpoints
  kernel/debug: Fix spelling mistake in debug_core.c
  kdb: Use newer api for tasklist scanning
  kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"
  kdb: remove unnecessary null check of dbg_io_ops

Merge tag 'mips_5.10' of git://git./linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...

Merge tag 's390-5.10-1' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Remove address space overrides using set_fs()

 - Convert to generic vDSO

 - Convert to generic page table dumper

 - Add ARCH_HAS_DEBUG_WX support

 - Add leap seconds handling support

 - Add NVMe firmware-assisted kernel dump support

 - Extend NVMe boot support with memory clearing control and addition of
   kernel parameters

 - AP bus and zcrypt api code rework. Add adapter configure/deconfigure
   interface. Extend debug features. Add failure injection support

 - Add ECC secure private keys support

 - Add KASan support for running protected virtualization host with
   4-level paging

 - Utilize destroy page ultravisor call to speed up secure guests
   shutdown

 - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code

 - Various checksum improvements

 - Other small various fixes and improvements all over the code

* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
  s390/uaccess: fix indentation
  s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
  s390/zcrypt: fix wrong format specifications
  s390/kprobes: move insn_page to text segment
  s390/sie: fix typo in SIGP code description
  s390/lib: fix kernel doc for memcmp()
  s390/zcrypt: Introduce Failure Injection feature
  s390/zcrypt: move ap_msg param one level up the call chain
  s390/ap/zcrypt: revisit ap and zcrypt error handling
  s390/ap: Support AP card SCLP config and deconfig operations
  s390/sclp: Add support for SCLP AP adapter config/deconfig
  s390/ap: add card/queue deconfig state
  s390/ap: add error response code field for ap queue devices
  s390/ap: split ap queue state machine state from device state
  s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
  s390/zcrypt: introduce msg tracking in zcrypt functions
  s390/startup: correct early pgm check info formatting
  s390: remove orphaned extern variables declarations
  s390/kasan: make sure int handler always run with DAT on
  s390/ipl: add support to control memory clearing for nvme re-IPL
  ...

Merge tag 'powerpc-5.10-1' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
   it for powerpc, as well as a related fix for sparc.

 - Remove support for PowerPC 601.

 - Some fixes for watchpoints & addition of a new ptrace flag for
   detecting ISA v3.1 (Power10) watchpoint features.

 - A fix for kernels using 4K pages and the hash MMU on bare metal
   Power9 systems with > 16TB of RAM, or RAM on the 2nd node.

 - A basic idle driver for shallow stop states on Power10.

 - Tweaks to our sched domains code to better inform the scheduler about
   the hardware topology on Power9/10, where two SMT4 cores can be
   presented by firmware as an SMT8 core.

 - A series doing further reworks & cleanups of our EEH code.

 - Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
   to prevent root from overwriting kernel memory.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.

* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
  Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
  selftests/powerpc: Fix eeh-basic.sh exit codes
  cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
  powerpc/time: Make get_tb() common to PPC32 and PPC64
  powerpc/time: Make get_tbl() common to PPC32 and PPC64
  powerpc/time: Remove get_tbu()
  powerpc/time: Avoid using get_tbl() and get_tbu() internally
  powerpc/time: Make mftb() common to PPC32 and PPC64
  powerpc/time: Rename mftbl() to mftb()
  powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
  powerpc/32s: Rename head_32.S to head_book3s_32.S
  powerpc/32s: Setup the early hash table at all time.
  powerpc/time: Remove ifdef in get_dec() and set_dec()
  powerpc: Remove get_tb_or_rtc()
  powerpc: Remove __USE_RTC()
  powerpc: Tidy up a bit after removal of PowerPC 601.
  powerpc: Remove support for PowerPC 601
  powerpc: Remove PowerPC 601
  powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
  powerpc: Remove CONFIG_PPC601_SYNC_FIX
  ...

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
 "155 patches.

  Subsystems affected by this patch series: mm (dax, debug, thp,
  readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
  core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
  binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
  romfs, and fault-injection"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
  lib, uaccess: add failure injection to usercopy functions
  lib, include/linux: add usercopy failure capability
  ROMFS: support inode blocks calculation
  ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
  sched.h: drop in_ubsan field when UBSAN is in trap mode
  scripts/gdb/tasks: add headers and improve spacing format
  scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
  kernel/relay.c: drop unneeded initialization
  panic: dump registers on panic_on_warn
  rapidio: fix the missed put_device() for rio_mport_add_riodev
  rapidio: fix error handling path
  nilfs2: fix some kernel-doc warnings for nilfs2
  autofs: harden ioctl table
  ramfs: fix nommu mmap with gaps in the page cache
  mm: remove the now-unnecessary mmget_still_valid() hack
  mm/gup: take mmap_lock in get_dump_page()
  binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
  coredump: rework elf/elf_fdpic vma_dump_size() into common helper
  coredump: refactor page range dumping into common helper
  coredump: let dump_emit() bail out on short writes
  ...

lib, uaccess: add failure injection to usercopy functions

To test fault-tolerance of user memory access functions, introduce fault
injection to usercopy functions.

If a failure is expected return either -EFAULT or the total amount of
bytes that were not copied.

Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-3-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib, include/linux: add usercopy failure capability

Patch series "add fault injection to user memory access", v3.

The goal of this series is to improve testing of fault-tolerance in usages
of user memory access functions, by adding support for fault injection.

syzkaller/syzbot are using the existing fault injection modes and will use
this particular feature also.

The first patch adds failure injection capability for usercopy functions.
The second changes usercopy functions to use this new failure capability
(copy_from_user, ...).  The third patch adds get/put/clear_user failures
to x86.

This patch (of 3):

Add a failure injection capability to improve testing of fault-tolerance
in usages of user memory access functions.

Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy
functions.  The should_fail_usercopy function is to be called by these
functions (copy_from_user, get_user, ...) in order to fail or not.

Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-1-alinde@google.com
Link: http://lkml.kernel.org/r/20200831171733.955393-2-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ROMFS: support inode blocks calculation

When use 'stat' tool to display file status, the 'Blocks' field always in
'0', this is not good for tool 'du'(e.g.: busybox 'du'), it always output
'0' size for the files under ROMFS since such tool calculates number of
512B Blocks.

This patch calculates approx.  number of 512B blocks based on inode size.

Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200811052606.4243-1-libing.zhou@nokia-sbell.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang

When the kernel is compiled with Clang, -fsanitize=bounds expands to
-fsanitize=array-bounds and -fsanitize=local-bounds.

Enabling -fsanitize=local-bounds with Clang has the unfortunate
side-effect of inserting traps; this goes back to its original intent,
which was as a hardening and not a debugging feature [1].  The same
feature made its way into -fsanitize=bounds, but the traps remained.  For
that reason, -fsanitize=bounds was split into 'array-bounds' and
'local-bounds' [2].

Since 'local-bounds' doesn't behave like a normal sanitizer, enable it
with Clang only if trapping behaviour was requested by
CONFIG_UBSAN_TRAP=y.

Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the
'local-bounds' option by default when UBSAN_TRAP is enabled.

[1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html
[2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.html

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lkml.kernel.org/r/20200922074330.2549523-1-georgepope@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sched.h: drop in_ubsan field when UBSAN is in trap mode

in_ubsan field of task_struct is only used in lib/ubsan.c, which in its
turn is used only `ifneq ($(CONFIG_UBSAN_TRAP),y)`.

Removing unnecessary field from a task_struct will help preserve the ABI
between vanilla and CONFIG_UBSAN_TRAP'ed kernels.  In particular, this
will help enabling bounds sanitizer transparently for Android's GKI.

Signed-off-by: Elena Petrova <lenaptr@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lkml.kernel.org/r/20200910134802.3160311-1-lenaptr@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb/tasks: add headers and improve spacing format

With the patch.
<e.g. o/p>
      TASK          PID    COMM
0xffffffff82c2b8c0   0   swapper/0
0xffff888a0ba20040   1   systemd
0xffff888a0ba24040   2   kthreadd
0xffff888a0ba28040   3   rcu_gp

w/o
0xffffffff82c2b8c0 <init_task> 0 swapper/0
0xffff888a0ba20040 1 systemd
0xffff888a0ba24040 2 kthreadd
0xffff888a0ba28040 3 rcu_gp

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/54c868c79b5fc364a8be7799891934a6fe6d1464.1597742951.git.riteshh@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command

This is many times found useful while debugging some FS related
issue.

<e.g. output>
      mount          super_block     devname pathname fstype options
0xffff888a0bfa4b40 0xffff888a0bfc1000 none / rootfs rw 0 0
0xffff888a033f75c0 0xffff8889fcf65000 /dev/root / ext4 rw,relatime 0 0
0xffff8889fc8ce040 0xffff888a0bb51000 devtmpfs /dev devtmpfs rw,relatime 0 0

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/a3c4177e1597b3e06d66d55e07d72c0c46a03571.1597742951.git.riteshh@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/relay.c: drop unneeded initialization

The variable 'consumed' is initialized with the consumed count but
immediately after that the consumed count is updated and assigned to
'consumed' again thus overwriting the previous value.  So, drop the
unneeded initialization.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201005205727.1147-1-sudipm.mukherjee@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: dump registers on panic_on_warn

Currently we print stack and registers for ordinary warnings but we do not
for panic_on_warn which looks as oversight - panic() will reboot the
machine but won't print registers.

This moves printing of registers and modules earlier.

This does not move the stack dumping as panic() dumps it.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Link: https://lkml.kernel.org/r/20200804095054.68724-1-aik@ozlabs.ru
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: fix the missed put_device() for rio_mport_add_riodev

rio_mport_add_riodev() misses to call put_device() when the device already
exists.  Add the missed function call to fix it.

Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lkml.kernel.org/r/20200922072525.42330-1-jingxiangfeng@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: fix error handling path

rio_dma_transfer() attempts to clamp the return value of
pin_user_pages_fast() to be >= 0.  However, the attempt fails because
nr_pages is overridden a few lines later, and restored to the undesirable
-ERRNO value.

The return value is ultimately stored in nr_pages, which in turn is passed
to unpin_user_pages(), which expects nr_pages >= 0, else, disaster.

Fix this by fixing the nesting of the assignment to nr_pages: nr_pages
should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set
to the return value of pin_user_pages_fast(), otherwise.

[jhubbard@nvidia.com: new changelog]

Fixes: e8de370188d09 ("rapidio: add mport char device driver")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/1600227737-20785-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: fix some kernel-doc warnings for nilfs2

Fixes the following W=1 kernel build warning(s):

fs/nilfs2/bmap.c:378: warning: Excess function parameter 'bhp' description in 'nilfs_bmap_assign'
fs/nilfs2/cpfile.c:907: warning: Excess function parameter 'status' description in 'nilfs_cpfile_change_cpmode'
fs/nilfs2/cpfile.c:946: warning: Excess function parameter 'stat' description in 'nilfs_cpfile_get_stat'
fs/nilfs2/page.c:76: warning: Excess function parameter 'inode' description in 'nilfs_forget_buffer'
fs/nilfs2/sufile.c:563: warning: Excess function parameter 'stat' description in 'nilfs_sufile_get_stat'

Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1601386269-2423-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: harden ioctl table

The table of ioctl functions should be marked const in order to put them
in read-only memory, and we should use array_index_nospec() to avoid
speculation disclosing the contents of kernel memory to userspace.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ian Kent <raven@themaw.net>
Link: https://lkml.kernel.org/r/20200818122203.GO17456@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ramfs: fix nommu mmap with gaps in the page cache

ramfs needs to check that pages are both physically contiguous and
contiguous in the file.  If the page cache happens to have, eg, page A for
index 0 of the file, no page for index 1, and page A+1 for index 2, then
an mmap of the first two pages of the file will succeed when it should
fail.

Fixes: 642fb4d1f1dd ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Link: https://lkml.kernel.org/r/20200914122239.GO6583@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove the now-unnecessary mmget_still_valid() hack

The preceding patches have ensured that core dumping properly takes the
mmap_lock.  Thanks to that, we can now remove mmget_still_valid() and all
its users.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-8-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: take mmap_lock in get_dump_page()

Properly take the mmap_lock before calling into the GUP code from
get_dump_page(); and play nice, allowing the GUP code to drop the
mmap_lock if it has to sleep.

As Linus pointed out, we don't actually need the VMA because
__get_user_pages() will flush the dcache for us if necessary.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-7-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot

In both binfmt_elf and binfmt_elf_fdpic, use a new helper
dump_vma_snapshot() to take a snapshot of the VMA list (including the gate
VMA, if we have one) while protected by the mmap_lock, and then use that
snapshot instead of walking the VMA list without locking.

An alternative approach would be to keep the mmap_lock held across the
entire core dumping operation; however, keeping the mmap_lock locked while
we may be blocked for an unbounded amount of time (e.g.  because we're
dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock
blocks things like the ->release handler of userfaultfd, and we don't
really want critical system daemons to grind to a halt just because
someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or
something like that.

Since both the normal ELF code and the FDPIC ELF code need this
functionality (and if any other binfmt wants to add coredump support in
the future, they'd probably need it, too), implement this with a common
helper in fs/coredump.c.

A downside of this approach is that we now need a bigger amount of kernel
memory per userspace VMA in the normal ELF case, and that we need O(n)
kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't
be terribly bad.

There currently is a data race between stack expansion and anything that
reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to
mitigate that for core dumping, take the mmap_lock in write mode when
taking a snapshot of the VMA hierarchy.  (If we only took the mmap_lock in
read mode, we could end up with a corrupted core dump if someone does
get_user_pages_remote() concurrently.  Not really a major problem, but
taking the mmap_lock either way works here, so we might as well avoid the
issue.) (This doesn't do anything about the existing data races with stack
expansion in other mm code.)

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: rework elf/elf_fdpic vma_dump_size() into common helper

At the moment, the binfmt_elf and binfmt_elf_fdpic code have slightly
different code to figure out which VMAs should be dumped, and if so,
whether the dump should contain the entire VMA or just its first page.

Eliminate duplicate code by reworking the binfmt_elf version into a
generic core dumping helper in coredump.c.

As part of that, change the heuristic for detecting executable/library
header pages to check whether the inode is executable instead of looking
at the file mode.

This is less problematic in terms of locking because it lets us avoid
get_user() under the mmap_sem.  (And arguably it looks nicer and makes
more sense in generic code.)

Adjust a little bit based on the binfmt_elf_fdpic version: ->anon_vma is
only meaningful under CONFIG_MMU, otherwise we have to assume that the VMA
has been written to.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-5-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: refactor page range dumping into common helper

Both fs/binfmt_elf.c and fs/binfmt_elf_fdpic.c need to dump ranges of
pages into the coredump file.  Extract that logic into a common helper.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-4-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: let dump_emit() bail out on short writes

dump_emit() has a retry loop, but there seems to be no way for that retry
logic to actually be used; and it was also buggy, writing the same data
repeatedly after a short write.

Let's just bail out on a short write.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-3-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_elf_fdpic: stop using dump_emit() on user pointers on !MMU

Patch series "Fix ELF / FDPIC ELF core dumping, and use mmap_lock properly in there", v5.

At the moment, we have that rather ugly mmget_still_valid() helper to work
around <https://crbug.com/project-zero/1790>: ELF core dumping doesn't
take the mmap_sem while traversing the task's VMAs, and if anything (like
userfaultfd) then remotely messes with the VMA tree, fireworks ensue.  So
at the moment we use mmget_still_valid() to bail out in any writers that
might be operating on a remote mm's VMAs.

With this series, I'm trying to get rid of the need for that as cleanly as
possible.  ("cleanly" meaning "avoid holding the mmap_lock across
unbounded sleeps".)

Patches 1, 2, 3 and 4 are relatively unrelated cleanups in the core
dumping code.

Patches 5 and 6 implement the main change: Instead of repeatedly accessing
the VMA list with sleeps in between, we snapshot it at the start with
proper locking, and then later we just use our copy of the VMA list.  This
ensures that the kernel won't crash, that VMA metadata in the coredump is
consistent even in the presence of concurrent modifications, and that any
virtual addresses that aren't being concurrently modified have their
contents show up in the core dump properly.

The disadvantage of this approach is that we need a bit more memory during
core dumping for storing metadata about all VMAs.

At the end of the series, patch 7 removes the old workaround for this
issue (mmget_still_valid()).

I have tested:

 - Creating a simple core dump on X86-64 still works.
 - The created coredump on X86-64 opens in GDB and looks plausible.
 - X86-64 core dumps contain the first page for executable mappings at
   offset 0, and don't contain the first page for non-executable file
   mappings or executable mappings at offset !=0.
 - NOMMU 32-bit ARM can still generate plausible-looking core dumps
   through the FDPIC implementation. (I can't test this with GDB because
   GDB is missing some structure definition for nommu ARM, but I've
   poked around in the hexdump and it looked decent.)

This patch (of 7):

dump_emit() is for kernel pointers, and VMAs describe userspace memory.
Let's be tidy here and avoid accessing userspace pointers under KERNEL_DS,
even if it probably doesn't matter much on !MMU systems - especially given
that it looks like we can just use the same get_dump_page() as on MMU if
we move it out of the CONFIG_MMU block.

One small change we have to make in get_dump_page() is to use
__get_user_pages_locked() instead of __get_user_pages(), since the latter
doesn't exist on nommu.  On mmu builds, __get_user_pages_locked() will
just call __get_user_pages() for us.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-1-jannh@google.com
Link: http://lkml.kernel.org/r/20200827114932.3572699-2-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests: add self-test for verifying load alignment

This produces a PIE binary with a variety of p_align requirements,
suitable for verifying that the load address meets that alignment
requirement.

Signed-off-by: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20200820170541.1132271-3-ckennelly@google.com
Link: https://lkml.kernel.org/r/20200821233848.3904680-3-ckennelly@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf: use PT_LOAD p_align values for suitable start address

Patch series "Selecting Load Addresses According to p_align", v3.

The current ELF loading mechancism provides page-aligned mappings.  This
can lead to the program being loaded in a way unsuitable for file-backed,
transparent huge pages when handling PIE executables.

While specifying -z,max-page-size=0x200000 to the linker will generate
suitably aligned segments for huge pages on x86_64, the executable needs
to be loaded at a suitably aligned address as well.  This alignment
requires the binary's cooperation, as distinct segments need to be
appropriately paddded to be eligible for THP.

For binaries built with increased alignment, this limits the number of
bits usable for ASLR, but provides some randomization over using fixed
load addresses/non-PIE binaries.

This patch (of 2):

The current ELF loading mechancism provides page-aligned mappings.  This
can lead to the program being loaded in a way unsuitable for file-backed,
transparent huge pages when handling PIE executables.

For binaries built with increased alignment, this limits the number of
bits usable for ASLR, but provides some randomization over using fixed
load addresses/non-PIE binaries.

Tested by verifying program with -Wl,-z,max-page-size=0x200000 loading.

[akpm@linux-foundation.org: fix max() warning]
[ckennelly@google.com: augment comment]
Link: https://lkml.kernel.org/r/20200821233848.3904680-2-ckennelly@google.com
Signed-off-by: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/20200820170541.1132271-1-ckennelly@google.com
Link: https://lkml.kernel.org/r/20200820170541.1132271-2-ckennelly@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add new warnings to author signoff checks.

The author signed-off-by checks are currently very vague.  Cases like same
name or same address are not handled separately.

For example, running checkpatch on commit be6577af0cef ("parisc: Add
atomic64_set_release() define to avoid CPU soft lockups"), gives:

WARNING: Missing Signed-off-by: line by nominal patch author
'John David Anglin <dave.anglin@bell.net>'

The signoff line was:
"Signed-off-by: Dave Anglin <dave.anglin@bell.net>"

Clearly the author has signed off but with a slightly different version
of his name. A more appropriate warning would have been to point out
at the name mismatch instead.

Previously, the values assumed by $authorsignoff were either 0 or 1
to indicate whether a proper sign off by author is present.
Extended the checks to handle four new cases.

$authorsignoff values now denote the following:

0: Missing sign off by patch author.

1: Sign off present and identical.

2: Addresses and names match, but comments differ.
   "James Watson(JW) <james@gmail.com>", "James Watson <james@gmail.com>"

3: Addresses match, but names are different.
   "James Watson <james@gmail.com>", "James <james@gmail.com>"

4: Names match, but addresses are different.
   "James Watson <james@watson.com>", "James Watson <james@gmail.com>"

5: Names match, addresses excluding subaddress details (RFC 5233) match.
   "James Watson <james@gmail.com>", "James Watson <james+a@gmail.com>"

Also introduced a new message type FROM_SIGN_OFF_MISMATCH
for cases 2, 3, 4 and 5.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/linux-kernel-mentees/c1ca28e77e8e3bfa7aadf3efa8ed70f97a9d369c.camel@perches.com/
Link: https://lkml.kernel.org/r/20201007192029.551744-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false positive on empty block comment lines

To avoid false positives in presence of SPDX-License-Identifier in
networking files it is required to increase the leeway for empty block
comment lines by one line.

For example, checking drivers/net/loopback.c which starts with

    // SPDX-License-Identifier: GPL-2.0-or-later
    /*
     * INET          An implementation of the TCP/IP protocol suite for the LINUX

rsults in an unnecessary warning

    WARNING: networking block comments don't use an empty /* line, use /* Comment...
    +/*
    + * INET                An implementation of the TCP/IP protocol suite for the LINUX

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Bartłomiej Żolnierkiewicz <b.zolnierkie@samsung.co>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lkml.kernel.org/r/20201006083509.19934-1-l.stelmach@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix multi-statement macro checks for while blocks.

Checkpatch.pl doesn't have a check for excluding while (...) {...} blocks
from MULTISTATEMENT_MACRO_USE_DO_WHILE error.

For example, running checkpatch.pl on the file mm/maccess.c in the kernel
generates the following error:

ERROR: Macros with complex values should be enclosed in parentheses
+#define copy_from_kernel_nofault_loop(dst, src, len, type, err_label)  \
+       while (len >= sizeof(type)) {                                   \
+               __get_kernel_nofault(dst, src, type, err_label);        \
+               dst += sizeof(type);                                    \
+               src += sizeof(type);                                    \
+               len -= sizeof(type);                                    \
+       }

The error is misleading for this case.  Enclosing it in parentheses
doesn't make any sense.

Checkpatch already has an exception list for such common macro types.
Added a new exception for while (...) {...} style blocks to the same.

In addition, the brace flatten logic was modified by changing the
substitution characters from "1" to "1u".  This was done to ensure that
macros in the form "#define foo(bar) while(bar){bar--;}" were also
correctly procecssed.

Link: https://lore.kernel.org/linux-kernel-mentees/dc985938aa3986702815a0bd68dfca8a03c85447.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201001171903.312021-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: emit a warning on embedded filenames

Embedding the complete filename path inside the file isn't particularly
useful as often the path is moved around and becomes incorrect.

Emit a warning when the source contains the filename.

[akpm@linux-foundation.org: remove stray " di"]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1fd5f9188a14acdca703ca00301ee323de672a8d.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: extend author Signed-off-by check for split From: header

Checkpatch did not handle cases where the author From: header was split
into multiple lines.  The author identity could not be resolved and
checkpatch generated a false NO_AUTHOR_SIGN_OFF warning.

A typical example is commit e33bcbab16d1 ("tee: add support for session's
client UUID generation").  When checkpatch was run on this commit, it
displayed:

"WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal
patch author ''"

This was due to split header lines not being handled properly and the
author himself wrote in commit cd2614967d8b ("checkpatch: warn if missing
author Signed-off-by"):

"Split From: headers are not fully handled: only the first part
is compared."

Support split From: headers by correctly parsing the header extension
lines.  RFC 5322, Section-2.2.3 stated that each extended line must start
with a WSP character (a space or htab).  The solution was therefore to
concatenate the lines which start with a WSP to get the correct long
header.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/linux-kernel-mentees/f5d8124e54a50480b0a9fa638787bc29b6e09854.camel@perches.com/
Link: https://lkml.kernel.org/r/20200921085436.63003-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: allow not using -f with files that are in git

If a file exists in git and checkpatch is used without the -f flag for
scanning a file, then checkpatch will scan the file assuming it's a patch
and emit:

ERROR: Does not appear to be a unified-diff format patch

Change the behavior to assume the -f flag if the file exists in git.

[joe@perches.com: fix git "fatal" warning if file argument outside kernel tree]
Link: https://lkml.kernel.org/r/b6afa04112d450c2fc120a308d706acd60cee294.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Julia Lawall <julia.lawall@inria.fr>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lkml.kernel.org/r/45b81a48e1568bd0126a96f5046eb7aaae9b83c9.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on self-assignments

The uninitialized_var() macro was removed recently via commit 63a0895d960a
("compiler: Remove uninitialized_var() macro") as it's not a particularly
useful warning and its use can "paper over real bugs".

Add a checkpatch test to warn on self-assignments as a means to avoid
compiler warnings and as a back-door mechanism to reproduce the old
uninitialized_var macro behavior.

[akpm@linux-foundation.org: coding style fixes]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Denis Efremov <efremov@linux.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Link: https://lkml.kernel.org/r/afc2cffdd315d3e4394af149278df9e8af7f49f4.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const_structs.checkpatch: add pinctrl_ops and pinmux_ops

All usages of include/linux of these are const pointers, and all instances
in the kernel except one, that are not const can be made const (patches
have been posted for those separately).

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200830224352.37114-1-rikard.falkeborn@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn if trace_printk and friends are called

trace_printk is meant as a debugging tool, and should not be compiled into
production code without specific debug Kconfig options enabled, or source
code changes, as indicated by the warning that shows up on boot if any
trace_printk is called:

 **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
 **                                                      **
 ** trace_printk() being used. Allocating extra memory.  **
 **                                                      **
 ** This means that this is a DEBUG kernel and it is     **
 ** unsafe for production use.                           **

Let's warn developers when they try to submit such a change.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200825193600.v2.1.I723c43c155f02f726c97501be77984f1e6bb740a@changeid
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const_structs.checkpatch: add phy_ops

All usages of phy_ops in include/linux uses const phy_ops * and all
instances of phy_ops in the kernel that are not const already can be made
const (patches have been posted for those separately).

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200824214132.9072-1-rikard.falkeborn@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for comma use that should be semicolon

There are commas used as statement terminations that should typically have
used semicolons instead.  Only direct assignments or use of a single
function or value on a single line are detected by this test.

e.g.:
foo = bar(), /* typical use is semicolon not comma */
bar = baz();

Add an imperfect test to detect these comma uses.

No false positives were found in testing, but many types of false
negatives are possible.

e.g.:
foo = bar() + 1, /* comma use, but not direct assignment */
bar = baz();

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/3bf27caf462007dfa75647b040ab3191374a59de.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: move repeated word test

Currently this test only works on .[ch] files.

Move the test to check more file types and the commit log.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/180b3b5677771c902b2e2f7a2b7090ede65fe004.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add --kconfig-prefix

Kconfig allows to customize the CONFIG_ prefix via the $CONFIG_
environment variable.  Out-of-tree projects may therefore use Kconfig with
a different prefix, or they may use a custom configuration tool which does
not use the CONFIG_ prefix at all.  Such projects may still want to adhere
to the Linux kernel coding style and run checkpatch.pl.

One example is OP-TEE [1] which does not use Kconfig but does have
configuration options prefixed with CFG_.  It also mostly follows the
kernel coding style and therefore being able to use checkpatch is quite
valuable.

To make this possible, add the --kconfig-prefix command line option.

[1] https://github.com/OP-TEE/optee_os

Signed-off-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200818081732.800449-1-jerome@forissier.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitops: use the same mechanism for get_count_order[_long]

These two functions share the same logic.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lkml.kernel.org/r/20200807085837.11697-3-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitops: simplify get_count_order_long()

These two cases could be unified into one.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lkml.kernel.org/r/20200807085837.11697-2-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/crc32.c: fix trivial typo in preprocessor condition

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS.
Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration
where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using
bitwise CRC anyway.

Fixes: 46c5801eaf86 ("crc32: bolt on crc32c")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lkml.kernel.org/r/20200923182122.GA3338@agrajag.zerfleddert.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_hmm.c: fix an error code in dmirror_allocate_chunk()

This is supposed to return false on failure, not a negative error code.

Fixes: 170e38548b81 ("mm/hmm/test: use after free in dmirror_allocate_chunk()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20201010200812.GA1886610@mwanda
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/list.h: add a macro to test if entry is pointing to the head

Add a macro to test if entry is pointing to the head of the list which is
useful in cases like:

  list_for_each_entry(pos, &head, member) {
    if (cond)
      break;
  }
  if (list_entry_is_head(pos, &head, member))
    return -ERRNO;

that allows to avoid additional variable to be added to track if loop has
not been stopped in the middle.

While here, convert list_for_each_entry*() family of macros to use a new one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lkml.kernel.org/r/20200929134342.51489-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/percpu_counter.c: use helper macro abs()

Use helper macro abs() to simplify the "x >= t || x <= -t" cmp.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927122746.5964-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/scatterlist.c: avoid a double memset

'sgl' is zeroed a few lines below in 'sg_init_table()'. There is no need to
clear it twice.

Remove the redundant initialization.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200920071544.368841-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/idr.c: document that ida_simple_{get,remove}() are deprecated

These two functions are deprecated.  Users should call ida_alloc() or
ida_free() respectively instead.  Add documentation to this effect until
the macro can be removed.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tri Vo <trong@android.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20200910055246.2297797-2-swboyd@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/idr.c: document calling context for IDA APIs mustn't use locks

The documentation for these functions indicates that callers don't need to
hold a lock while calling them, but that documentation is only in one
place under "IDA Usage".  Let's state the same information on each IDA
function so that it's clear what the calling context requires.
Furthermore, let's document ida_simple_get() with the same information so
that callers know how this API works.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tri Vo <trong@android.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20200910055246.2297797-1-swboyd@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/mpi/mpi-bit.c: fix spello of "functions"

Fix typo/spello of "functions".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/8df15173-a6df-9426-7cad-a2d279bf1170@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: test_sysctl: delete duplicated words

Drop the repeated word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040520.1999-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: syscall: delete duplicated words

Drop the repeated word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040514.26136-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: radix-tree: delete duplicated words

Drop the repeated word "be".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040508.26086-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: earlycpio: delete duplicated words

Drop the repeated word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040455.25995-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: dynamic_queue_limits: delete duplicated words + fix typo

Drop the repeated word "the".
Fix spelling of "excess".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040449.25946-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: decompress_bunzip2: delete duplicated words

Drop the repeated word "how".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040436.25852-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: libcrc32c: delete duplicated words

Drop the repeated word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040430.25807-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: bitmap: delete duplicated words

Drop the repeated word "an".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040424.25760-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: jarkko.sakkinen@linux.intel.com -> jarkko@

Use @kernel.org address as the main communications end point.  Update the
corresponding M-entries and .mailmap (for git shortlog translation).

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20201015142710.8371-1-jarkko.sakkinen@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer: exclude MAINTAINERS file(s) from --git-fallback

MAINTAINERS files generally have no specific maintainer but are updated by
individuals for subsystems all over the source tree.

Exclude MAINTAINERS file(s) from --git-fallback searches so the unlucky
individuals that update the files the most are not shown by default.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/2bacb0a9c06fbb6d56a43bf930e808c74243c908.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer: add test for file in VCS

It's somewhat common for me to ask get_maintainer to tell me who maintains
a patch file rather than the files modified by the patch.

Emit a warning if using get_maintainer.pl -f <patchfile>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/f63229c051567041819f25e76f49d83c6e4c0f71.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel: acct.c: fix some kernel-doc nits

Fix kernel-doc notation to use the documented Returns: syntax and place
the function description for acct_process() on the first line where it
should be.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/b4c33e5d-98e8-0c47-77b6-ac1859f94d7f@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>