Antti Palosaari [Sun, 10 Mar 2013 00:10:14 +0000 (21:10 -0300)]
[media] it913x: fix pid filter
I just made commit: "dvb_usb_v2: rework USB streaming logic" that
breaks that driver PID filter.
it913x driver checks use of PID filter directly from DVB USB v2 core
internal variable "adap->pid_filtering" and stores it to own state.
Calling order of .pid_filter_ctrl() and .pid_filter() was changed
and due to that state was updated too late. Update state earlier.
TODO: checking PID filter usage from DVB USB v2 is not very good idea
as PID filter callbacks are called only when PID filter is enabled.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 19:10:55 +0000 (16:10 -0300)]
[media] dvb_usb_v2: rework USB streaming logic
Control flow order changed a little bit. HW PID filter is now
disabled also when streaming is stopped - earlier it was just
set only when streaming was started.
Control flow is now:
* set streaming status bit
* submit USB streaming packets
* enable HW PID filter
* ask device to start streaming
* N x add PID to device HW PID filter
... streaming video ...
* N x remove PID from device HW PID filter
* ask device to stop streaming
* disable HW PID filter
* kill USB streaming packets
* clear streaming status bit
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 14:38:41 +0000 (11:38 -0300)]
[media] cypress_firmware: make checkpatch.pl happy
New checkpatch version likes to see strings not to split multiple
lines even those are exceeding 80 line length.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 14:36:35 +0000 (11:36 -0300)]
[media] dvb_usb_v2: make checkpatch.pl happy
New checkpatch version likes to see strings not to split multiple
lines even those are exceeding 80 line length.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 03:16:32 +0000 (00:16 -0300)]
[media] dvb_usb_v2: replace Kernel userspace lock with wait queue
There was sync mutex which was held over userspace. That is very
wrong and could cause deadlock if different userspace process is
used to "unlock". Wait queue seems to be correct solution for
that kind of synchronizing issue so use it instead.
lock debug gives following bug report:
================================================
[ BUG: lock held when returning to user space! ]
3.9.0-rc1+ #38 Tainted: G O
------------------------------------------------
tzap/4614 is leaving the kernel with locks still held!
1 lock held by tzap/4614:
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 19:29:36 +0000 (16:29 -0300)]
[media] dvb-usb/dvb-usb-v2: use IS_ENABLED
Instead of checking everywhere there for 3 symbols, use instead
IS_ENABLED macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 19:29:08 +0000 (16:29 -0300)]
[media] cx23885: use IS_ENABLED
Instead of checking everywhere there for 3 symbols, use instead
IS_ENABLED macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 19:24:09 +0000 (16:24 -0300)]
[media] tuners: use IS_ENABLED
Instead of checking everywhere there for 3 symbols, use instead
IS_ENABLED macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 19:11:54 +0000 (16:11 -0300)]
[media] dvb-frontends: use IS_ENABLED
Instead of checking everywhere there for 3 symbols, use instead
IS_ENABLED macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 18:46:18 +0000 (15:46 -0300)]
[media] hdpvr-video: Use the proper check for I2C support
As reported by Geert Uytterhoeven <geert@linux-m68k.org>:
drivers/media/usb/hdpvr/hdpvr-video.c: warning: "CONFIG_I2C_MODULE" is not defined [-Wundef]
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Thanks-to: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Wei Yongjun [Fri, 22 Mar 2013 02:17:18 +0000 (23:17 -0300)]
[media] dvb_usb_v2: make local function dvb_usb_v2_generic_io() static
dvb_usb_v2_generic_io() was not declared. It should be static.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 22 Mar 2013 12:54:00 +0000 (09:54 -0300)]
[media] em28xx: tuner setup is broken after algo_data change
Commit
aab3125c43d8fecc7134e5f1e729fabf4dd196da broke em28xx. I traced
this eventually to the change in what algo_data points to. This pointer
is also passed to em28xx_tuner_callback() through several hidden tuner
layers (yuck!) and that callback was not updated.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 09:03:27 +0000 (06:03 -0300)]
[media] em28xx: Only change I2C bus inside em28xx-i2c
There's currently a bug on em28xx-i2c that makes it write the
wrong values to register 06, that controlls the I2C bus speed
and bus.
Fix it to change only the I2C bus flag.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Mar 2013 09:51:06 +0000 (06:51 -0300)]
[media] m5602_ov7660: return error at ov7660_init()
It used to be a code that returns arror at ov7660_init.
However, this was removed by changeset
c84e412f:
@@ -231,33 +116,40 @@ int ov7660_init(struct sd *sd)
if (dump_sensor)
ov7660_dump_registers(sd);
- err = ov7660_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
- if (err < 0)
- return err;
+ return 0;
+}
- err = ov7660_set_auto_white_balance(&sd->gspca_dev,
- sensor_settings[AUTO_WHITE_BALANCE_IDX]);
- if (err < 0)
- return err;
As complained by gcc:
drivers/media/usb/gspca/m5602/m5602_ov7660.c: In function 'ov7660_init':
drivers/media/usb/gspca/m5602/m5602_ov7660.c:99:9: warning: variable 'err' set but not used [-Wunused-but-set-variable]
It should be noticed that the original error code was crappy, as it wasn't
returning any error if sensor init fails.
Fix it by returning an error if the sensor can't be initialized.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Mar 2013 09:47:07 +0000 (06:47 -0300)]
[media] siano: remove the ir protocol field
This field is unused. Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Mar 2013 09:37:32 +0000 (06:37 -0300)]
[media] drxk: fix CNR calculus
Changeset
8f3741e accidentally broke the CNR estimation. It should
be calculated as "a + b - c". However, previously, the subtraction
by c only occurred if SNR would be positive, due to a bad binding
to DVBv3 API.
This also fixes the following warning:
drivers/media/dvb-frontends/drxk_hard.c:2556:6: warning: variable 'c' set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Mar 2013 09:22:45 +0000 (06:22 -0300)]
[media] siano: use do_div() for 64-bits division
As reported by Frank Schäfer <fschaefer.oss@googlemail.com>:
ERROR: "__divdi3" [drivers/media/common/siano/smsdvb.ko] undefined!
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Tested-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 10 Mar 2013 01:58:13 +0000 (22:58 -0300)]
[media] MAINTAINERS: add drivers/media/tuners/it913x*
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 20:50:21 +0000 (17:50 -0300)]
[media] af9035: style changes for remote controller polling
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 20:39:12 +0000 (17:39 -0300)]
[media] af9035: check I/O errors on IR polling
Use more careful error checks.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 19:54:09 +0000 (16:54 -0300)]
[media] af9033: implement i/o optimized reg table writer
Use register address auto increment to reduce I/O when large
register / values tables are written.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 02:13:31 +0000 (23:13 -0300)]
[media] af9033: sleep on attach()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 01:18:56 +0000 (22:18 -0300)]
[media] af9033: move code from it913x to af9033
That register is property of demodulator so move it correct place.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:59:41 +0000 (21:59 -0300)]
[media] it913x: remove unused af9033 demod tuner config inits
Those are demodulator init tables according to used tuner tuner
config. af9033 demod driver does those inits currently and due
to that these duplicate inits could be removed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:47:20 +0000 (21:47 -0300)]
[media] af9033: add IT9135 tuner config "62" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:44:30 +0000 (21:44 -0300)]
[media] af9033: add IT9135 tuner config "61" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:38:00 +0000 (21:38 -0300)]
[media] af9033: add IT9135 tuner config "60" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:29:05 +0000 (21:29 -0300)]
[media] af9033: add IT9135 tuner config "52" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:25:16 +0000 (21:25 -0300)]
[media] af9033: add IT9135 tuner config "51" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 8 Mar 2013 00:17:55 +0000 (21:17 -0300)]
[media] af9033: add IT9135 tuner config "38" init table
Dumped out from the Windows driver version 12.07.06.1
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 22:22:52 +0000 (19:22 -0300)]
[media] af9035: change dual mode boolean to bit field
For some reason there seems to be value 0x03 in eeprom for dual mode
(and 0x00 for single mode). Boolean is not always 1 bit wide - it
could be 8 bit wide too. Storing number 0x03 to boolean causes driver
to thing there is 4 tuners in some cases :o
Add also some comments regarding to eeprom.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 22:03:06 +0000 (19:03 -0300)]
[media] af9035: enable remote controller for IT9135 too
There is no difference towards AF9035 remote controller, so enable it.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 21:43:51 +0000 (18:43 -0300)]
[media] af9035: set demod TS mode config in read_config()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 21:28:25 +0000 (18:28 -0300)]
[media] af9035: use already detected eeprom base addr
eeprom memory mapped base address is detected at the very first.
Use it everywhere.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 20:59:55 +0000 (17:59 -0300)]
[media] af9035: select firmware loader according to firmware
AF9035 and IT9135 supports two different firmware format. Select
correct loader according to first byte of firmware file.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 03:09:36 +0000 (00:09 -0300)]
[media] it913x: remove demod init reg tables
These are demod inits and are already done by af9033 demod driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 03:03:06 +0000 (00:03 -0300)]
[media] af9033: add IT9135 demod reg init tables
Dumped out from Windows driver version 12.07.06.1, 07/06/2012.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 28 Feb 2013 23:54:44 +0000 (20:54 -0300)]
[media] it913x: use dev_foo() logging
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 28 Feb 2013 23:14:38 +0000 (20:14 -0300)]
[media] it913x: include tuner IDs from af9033.h
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 28 Feb 2013 22:02:19 +0000 (19:02 -0300)]
[media] it913x: remove unused variables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 28 Feb 2013 03:14:06 +0000 (00:14 -0300)]
[media] it913x: get rid of it913x config struct
We don't need it. Tuner ID and device address are enough.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 28 Feb 2013 02:29:02 +0000 (23:29 -0300)]
[media] it913x: tuner power up routines
Copy forgotten power up registers from it913x-fe driver.
Remove two demod registers as those are already written
by af9033 driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 26 Feb 2013 23:57:01 +0000 (20:57 -0300)]
[media] it913x: rename functions and variables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 26 Feb 2013 23:42:21 +0000 (20:42 -0300)]
[media] it913x: merge it913x_fe_suspend() to it913x_fe_sleep()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 26 Feb 2013 23:34:06 +0000 (20:34 -0300)]
[media] it913x: merge it913x_fe_start() to it913x_init_tuner()
Merge those functions to one and disable sleep.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 3 Feb 2013 16:46:56 +0000 (13:46 -0300)]
[media] af9035: IT9135 dual tuner related changes
Now it supports IT9135 based dual tuner devices.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 3 Feb 2013 16:39:55 +0000 (13:39 -0300)]
[media] af9033: IT9135 v2 supported related changes
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 2 Feb 2013 01:23:07 +0000 (22:23 -0300)]
[media] af9035: basic support for IT9135 v2 chips
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 12 Jan 2013 01:16:25 +0000 (22:16 -0300)]
[media] af9035: merge af9035 and it9135 eeprom read routines
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 11 Jan 2013 23:45:11 +0000 (20:45 -0300)]
[media] af9035: USB1.1 support (== PID filters)
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 11 Jan 2013 19:34:06 +0000 (16:34 -0300)]
[media] af9035: constify clock tables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 11 Jan 2013 19:22:07 +0000 (16:22 -0300)]
[media] af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)
That same USB ID is used both AF9015 and AF9035 driver.
iManufacturer is only thing we can select correct driver without a I/O.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 19:29:13 +0000 (16:29 -0300)]
[media] af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)
That same USB ID is used both AF9015 and AF9035 driver.
iManufacturer is only thing we can select correct driver without a I/O.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 18:26:05 +0000 (15:26 -0300)]
[media] af9035: fix af9033 demod sampling frequency
ADC needs to be also multiplied to 2 as it9135.
Fixes bug I introduced few commits ago.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 18:16:54 +0000 (15:16 -0300)]
[media] af9035: add auto configuration heuristic for it9135
Detect automatically multiple chip versions and select configuration
according to that.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 12:51:13 +0000 (09:51 -0300)]
[media] af9035: add support for 1st gen it9135
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 12:48:03 +0000 (09:48 -0300)]
[media] af9033: support for it913x tuners
Add support for tuners integrated to the IT9135 and IT9137.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Mon, 7 Jan 2013 12:37:30 +0000 (09:37 -0300)]
[media] ITE IT913X silicon tuner driver
It is tuner driver for tuner integrated to the ITE IT9135 and
IT9137 chips. I split it out from the current it913x-fe driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kevin Baradon [Mon, 18 Feb 2013 18:10:22 +0000 (15:10 -0300)]
[media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when keypad is pressed
My 15c2:0036 device floods syslog when a keypad key is pressed:
Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2
Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
This patch removes those messages from imon, following suggestion from
Mauro. Unknown keys shall be correctly handled by rc/input layer.
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kevin Baradon [Mon, 18 Feb 2013 17:42:47 +0000 (14:42 -0300)]
[media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036
Some imon devices (like 15c2:0036) need a higher delay between
send_packet calls.
Default value is still 5ms to avoid regressions on already working
hardware.
Also use interruptible wait to avoid load average going too high (and
let caller handle signals).
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Federico Fuga [Fri, 24 Aug 2012 14:54:11 +0000 (11:54 -0300)]
[media] Corrected Oops on omap_vout when no manager is connected
If no manager is connected to the vout device, the omapvid_init() function
fails. No error condition is checked, and the device is started. Later on,
when irq is serviced, a NULL pointer dereference occurs.
Also, the isr routine must be registered only if no error occurs, otherwise
the isr triggers without the proper setup, and the kernel oops again.
To prevent this, the error condition is checked, and the streamon function
exits with error. Also the isr registration call is moved after the setup
procedure is completed.
Reviewed-by: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Wed, 13 Mar 2013 03:23:36 +0000 (00:23 -0300)]
[media] xc5000: fix incorrect debug printnk
I found very small bug in xc5000 source. When set option debug=1 and
listen a radio we see in dmesg xc5000: xc_SetTVStandard()
Standard = M/N-NTSC/PAL-BTSC at all times. However, it should be, instead
"FM Radio-INPUT1_MONO".
That happens because xc5000_set_radio_freq() gets the correct value for
VideoMode and AudioMode for radio and calls xc_SetTVStandard() where name
of standard comes from the incorrect place priv->video_standard.
This incorrect debug message makes debugging a little difficult.
Signed-off-by: Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Paul Bolle [Mon, 11 Mar 2013 21:30:03 +0000 (18:30 -0300)]
[media] soc_camera: remove two outdated selects
Release v2.6.30 removed the MT9M001_PCA9536_SWITCH and
MT9V022_PCA9536_SWITCH Kconfig symbols, in commits
36034dc325ecab63c8cfb992fbf9a1a8e94738a2 ("V4L/DVB (11032): mt9m001:
allow setting of bus width from board code") and
e958e27adeade7fa085dd396a8a0dfaef7e338c1 ("V4L/DVB (11033): mt9v022:
allow setting of bus width from board code").
These two commits removed all gpio related code from these two drivers.
But they skipped removing their two selects of GPIO_PCA953X. Remove
these now as they are outdated. Their dependencies can never evaluate to
true anyhow.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Tue, 5 Mar 2013 04:53:37 +0000 (01:53 -0300)]
[media] sh_vou: Use module_platform_driver_probe macro
module_platform_driver_probe() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Tue, 5 Mar 2013 04:53:36 +0000 (01:53 -0300)]
[media] sh_veu: Use module_platform_driver_probe macro
module_platform_driver_probe() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Tue, 5 Mar 2013 04:53:38 +0000 (01:53 -0300)]
[media] soc_camera/mx1_camera: Use module_platform_driver_probe macro
module_platform_driver_probe() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Mon, 4 Mar 2013 08:15:18 +0000 (05:15 -0300)]
[media] sh_veu.c: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Mon, 4 Mar 2013 08:15:19 +0000 (05:15 -0300)]
[media] soc_camera/pxa_camera: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Mon, 4 Mar 2013 08:15:21 +0000 (05:15 -0300)]
[media] soc_camera/sh_mobile_csi2: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Mon, 4 Mar 2013 08:15:20 +0000 (05:15 -0300)]
[media] soc_camera/sh_mobile_ceu_camera: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrei Andreyanau [Wed, 6 Feb 2013 14:29:18 +0000 (11:29 -0300)]
[media] mt9v022 driver: send valid HORIZONTAL_BLANKING values to mt9v024 soc camera
This patch fixes the issue that appears when mt9v024 camera is used with the
mt9v022 soc camera driver. The minimum total row time is 690 columns
(horizontal width + horizontal blanking). The minimum horizontal
blanking is 61. Thus, when the window width is set below 627, horizontal blanking must
be increased. For the mt9v024 camera the values above are correct and
for the mt9v022 camera the correct values are in the existing kernel driver.
Signed-off-by: Andrei Andreyanau <a.andreyanau@sam-solutions.net>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 12 Mar 2013 11:40:37 +0000 (08:40 -0300)]
[media] mt9m111: fix Oops - initialise context before dereferencing
A recent commit "[media] soc-camera: Push probe-time power management to
drivers" causes an Oops during mt9m111 driver probing because its .ctx
private data field is now dereferenced before it is initialised. Fix this
by initialising the field earlier.
Reported-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Benoît Thébaudeau [Tue, 26 Feb 2013 18:32:49 +0000 (15:32 -0300)]
[media] soc-camera: mt9m111: Fix auto-exposure control
Commit
f9bd5843658e18a7097fc7258c60fb840109eaa8 changed V4L2_CID_EXPOSURE_AUTO
from boolean to enum, and commit
af8425c54beb3c32cbb503a379132b3975535289
changed the creation of this control into a menu for the mt9m111. However,
mt9m111_set_autoexposure() is still interpreting the value set for this control
as a boolean, which also conflicts with the default value of this control set to
V4L2_EXPOSURE_AUTO (0).
This patch makes mt9m111_set_autoexposure() interpret the value set for
V4L2_CID_EXPOSURE_AUTO as defined by enum v4l2_exposure_auto_type.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Paul Bolle [Mon, 11 Mar 2013 14:31:39 +0000 (11:31 -0300)]
[media] ts2020: use customise option correctly
The Kconfig entry for "TS2020 based tuners" defaults to modular if
DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with
MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate
the logic, so we are in line with all the similar entries in this file.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 8 Mar 2013 07:13:35 +0000 (04:13 -0300)]
[media] media: tvp514x: enable TVP514X for media controller based usage
add support for TVP514x as a media entity and support for
pad operations. The decoder supports 1 output pad.
The default format code was V4L2_MBUS_FMT_YUYV10_2X10
changed it to V4L2_MBUS_FMT_UYVY8_2X8.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Thu, 7 Feb 2013 16:48:51 +0000 (13:48 -0300)]
[media] media: add support for decoder as one of media entity types
A lot of SOCs including Texas Instruments Davinci family mainly use
video decoders as input devices. This patch adds a flag
'MEDIA_ENT_T_V4L2_SUBDEV_DECODER' media entity type for decoder's.
Along side updates the documentation for this media entity type.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Mon, 18 Feb 2013 10:56:41 +0000 (07:56 -0300)]
[media] media: ths7353: add support for ths7353 video amplifier
The patch adds support for THS7353 video amplifier.
The the THS7353 amplifier is very much similar to the
existing THS7303 video amplifier driver.
This patch appropriately makes changes to the existing
ths7303 driver and adds support for the THS7353.
This patch also adds V4L2_IDENT_THS7353 for the THS7353
chip and appropriate changes to Kconfig file for building.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sachin Kamat [Tue, 5 Mar 2013 10:52:14 +0000 (07:52 -0300)]
[media] davinci_vpfe: Use module_platform_driver macro
module_platform_driver() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexandru Gheorghiu [Sun, 10 Mar 2013 11:14:53 +0000 (08:14 -0300)]
[media] Drivers: staging: media: davinci_vpfe: Use resource_size function
Use resource_size function on resource object instead of explicit
computation.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ismael Luceno [Sat, 9 Mar 2013 06:25:07 +0000 (03:25 -0300)]
[media] solo6x10: Update TODO (maintainer change)
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 2 Mar 2013 08:12:08 +0000 (05:12 -0300)]
[media] vb2-dma-sg: add debug module option
This prevents the kernel log from being spammed with these messages.
By turning on the debug option you will see them again.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 1 Mar 2013 18:44:20 +0000 (15:44 -0300)]
[media] videobuf2: add gfp_flags
Some drivers have special memory requirements for their buffers, usually
related to DMA (e.g. GFP_DMA or __GFP_DMA32). Make it possible to specify
additional GFP flags for those buffers by adding a gfp_flags field to
vb2_queue.
Note that this field will be replaced in the future with a different
mechanism, but that is still work in progress and we need this feature
now so we won't be able to convert drivers with such requirements to vb2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Mar 2013 13:39:31 +0000 (10:39 -0300)]
[media] dvb-core: don't clear stats at DTV_CLEAR
The stats are cleared by the frontend. Don't do it at DTV_CLEAR.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Mar 2013 11:57:42 +0000 (08:57 -0300)]
[media] drxk: Fix bogus signal strength indicator
The DVBv3 signal strength indicator is bogus: it doesn't range
from 0 to 65535 as it would be expected. Also, 0 means the max
signal strength.
Now that a better way to estimate it was added, use the new
way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Mar 2013 11:21:52 +0000 (08:21 -0300)]
[media] drxk: use a better calculus for RF strength
The AZ6007 driver released by Terratec has a better way to
estimate the signal strength, at CtrlSigStrength(). Port it
to the driver.
It should be noticed that there are two parameters there that
are tuner-specific.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Mar 2013 09:15:45 +0000 (06:15 -0300)]
[media] drxk: Add pre/post BER and PER/UCB stats
The original az6007 driver has the code to calculate such
stats. Add it to the driver, reporting them via DVBv5
stats API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Mar 2013 09:36:41 +0000 (06:36 -0300)]
[media] drxk: remove dummy BER read code
The BER code does nothing but filling it with zero. Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 13:01:47 +0000 (10:01 -0300)]
[media] siano: make some functions static
drivers/media/common/siano/smsdvb-debugfs.c:51:6: warning: no previous prototype for 'smsdvb_print_dvb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:154:6: warning: no previous prototype for 'smsdvb_print_isdb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:244:6: warning: no previous prototype for 'smsdvb_print_isdb_stats_ex' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:832:5: warning: no previous prototype for 'smscore_configure_board' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:1301:5: warning: no previous prototype for 'smscore_init_device' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 12:40:22 +0000 (09:40 -0300)]
[media] siano: Fix the remaining checkpatch.pl compliants
Fix all other remaining checkpatch.pl compliants on the Siano driver,
except for the 80-cols (soft) limit. Those are harder to fix, and
probably not worth to do right now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 12:27:37 +0000 (09:27 -0300)]
[media] siano: remove the remaining CamelCase compliants
Remove the remaining CamelCase checkpatch.pl compliants.
There are still a few left, but those are due to USB and
DVB APIs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 12:10:22 +0000 (09:10 -0300)]
[media] siano: fix checkpatch.pl compliants on smscoreapi.h
Fix the remaining checkpatch.pl compliants at smscoreapi.h,
except by the "line over 80 characters" on comments. Fixing those
would require more time, as the better is to convert them into the
struct descriptions used inside the kernel, as described at:
Documentation/kernel-doc-nano-HOWTO.txt
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 12:06:03 +0000 (09:06 -0300)]
[media] siano: convert structure names to lowercase
There are several structures defined in uppercase. Convert them
to lowercase, and simplify their names, when possible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Mar 2013 11:49:43 +0000 (08:49 -0300)]
[media] siano: get rid of CammelCase from smscoreapi.h
It is almost impossible to see a compliant with checkpatch.pl
on those Siano drivers, as there are simply too much violations
on it. So, now that a big change was done, the better is to
cleanup the checkpatch compliants.
Let's first replace all CammelCase symbols found at smscoreapi.h
using camel_case namespace. That removed 144 checkpatch.pl
compliants on this file. Of course, the other files need to be
fixed accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 20:46:53 +0000 (17:46 -0300)]
[media] siano: add MODULE_FIRMWARE() macros
This driver can use several firmwares. Provide such info at
module firmware metadata.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 20:02:54 +0000 (17:02 -0300)]
[media] siano: use defines for firmware names
There are too many firmwares there. As we need to add
MODULE_FIMWARE() macros, the better is to define their names
on just one place and use the macros for both cards/device type
tables and MODULE_FIRMWARE().
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 16:12:29 +0000 (13:12 -0300)]
[media] siano: Remove bogus complain about MSG_SMS_DVBT_BDA_DATA
When the driver is tuned into chanel, and it is removed/reinserted,
the message stream data may be arriving during device probe:
[ 5680.162004] smscore_set_device_mode: set device mode to 6
[ 5680.162267] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162391] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162641] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163266] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163516] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163640] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164265] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164515] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164519] smscore_onresponse: Firmware id 6 prots 0x40 ver 8.1
[ 5680.164766] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.166018] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.166438] DVB: registering new adapter (Siano Rio Digital Receiver)
Instead of complaining, just silently discard those messages, instead of
complaining.
A proper fix is to put the device on suspend/power down mode when the module
is removed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 16:06:28 +0000 (13:06 -0300)]
[media] siano: remove doubled new line
sms_debug() and sms_info() already adds a '\n' at the printed
strings. No need to add more.
That helps to cleanup stuff like:
[ 4868.205648] smscore_onresponse: message not handled.
[ 4868.205898] smscore_onresponse: message not handled.
and:
[ 5467.959769] smscore_onresponse:
data rate 143069 bytes/secs
While here, provides the message name, when the message is not
handled by the smsmdtv core.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 15:59:50 +0000 (12:59 -0300)]
[media] siano: remove a bogus printk line
The logic that detects the types of sms devices is bogus. It returns
[ 4645.187790] smsusb_init_device: line: 372: Unspecified sms device type!
For several devices, including the one I have (SMS_RIO). In a matter
of fact, the right thing to do there is to print an error only if
the device is really unknown (SMS_UNKNOWN_TYPE).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 15:42:45 +0000 (12:42 -0300)]
[media] siano: add a MAINTAINERS entry for it
Nobody is maintaining this driver. The project started by a
developer that used to work at Hauppauge. A Siano developer
assumed its maintainership after that, but he left the company.
Another Siano developer sent several patches updating it, but,
after upstream feedback, it seems he gave up merging the driver,
as he never answered back to the received feedbacks.
As I have a few siano devices here that work with ISDB-T, I
can help to keep it into a good shape. So, better to take its
maintainership.
I don't have any siano SDIO setup here, trough. So, I'll just
apply without any test any patch that looks sane and touches
only drivers/media/mmc/siano. So, let's tag it as "Odd fixes".
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Mar 2013 15:06:08 +0000 (12:06 -0300)]
[media] siano: reorder smscore_get_fw_filename() function
Put this function earlier in the code, to avoid the need of
defining a function stub.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / linux-2.6-microblaze.git / log