git.monstr.eu Git - linux-2.6-microblaze.git/log

octeontx2-af: Fix CPT AF register offset calculation

Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.

Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.

Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F

The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.

Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ngbe: Fix phy mode set to external phy

The MAC only has add the TX delay and it can not be modified.
MAC and PHY are both set the TX delay cause transmission problems.
So just disable TX delay in PHY, when use rgmii to attach to
external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers.
And it is does not matter to internal phy.

Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink")
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-20 (ice)

This series contains updates to ice driver only.

Maciej fixes issues with Rx data path on architectures with
PAGE_SIZE >= 8192; correcting page reuse usage and calculations for
last offset and truesize.

Michal corrects assignment of devlink port number to use PF id.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: use internal pf id instead of function number
  ice: fix truesize operations for PAGE_SIZE >= 8192
  ice: fix ICE_LAST_OFFSET formula
  ice: fix page reuse when PAGE_SIZE is over 8k
====================

Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Fix double DMA unmapping for XDP_REDIRECT

Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path.  This should have been removed when we let the page pool
handle the DMA mapping.  This bug causes the warning:

WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G        W          6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS:  0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0

Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ipv6-fix-possible-uaf-in-output-paths'

Eric Dumazet says:

====================
ipv6: fix possible UAF in output paths

First patch fixes an issue spotted by syzbot, and the two
other patches fix error paths after skb_expand_head()
adoption.
====================

Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: prevent possible UAF in ip6_xmit()

If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.

We must use rcu_read_lock() to prevent a possible UAF.

Fixes: 0c9f227bee11 ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: fix possible UAF in ip6_finish_output2()

If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.

We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.

Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: prevent UAF in ip6_send_skb()

syzbot reported an UAF in ip6_send_skb() [1]

After ip6_local_out() has returned, we no longer can safely
dereference rt, unless we hold rcu_read_lock().

A similar issue has been fixed in commit
a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()")

Another potential issue in ip6_finish_output2() is handled in a
separate patch.

[1]
BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530

CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
  rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
  rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  sock_write_iter+0x2dd/0x400 net/socket.c:1160
do_iter_readv_writev+0x60a/0x890
  vfs_writev+0x37c/0xbb0 fs/read_write.c:971
  do_writev+0x1b1/0x350 fs/read_write.c:1018
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f936bf79e79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79
RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8
</TASK>

Allocated by task 6530:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  unpoison_slab_object mm/kasan/common.c:312 [inline]
  __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
  kasan_slab_alloc include/linux/kasan.h:201 [inline]
  slab_post_alloc_hook mm/slub.c:3988 [inline]
  slab_alloc_node mm/slub.c:4037 [inline]
  kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044
  dst_alloc+0x12b/0x190 net/core/dst.c:89
  ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670
  make_blackhole net/xfrm/xfrm_policy.c:3120 [inline]
  xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313
  ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257
  rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
  ___sys_sendmsg net/socket.c:2651 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 45:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
  poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
  __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
  kasan_slab_free include/linux/kasan.h:184 [inline]
  slab_free_hook mm/slub.c:2252 [inline]
  slab_free mm/slub.c:4473 [inline]
  kmem_cache_free+0x145/0x350 mm/slub.c:4548
  dst_destroy+0x2ac/0x460 net/core/dst.c:124
  rcu_do_batch kernel/rcu/tree.c:2569 [inline]
  rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  __do_softirq kernel/softirq.c:588 [inline]
  invoke_softirq kernel/softirq.c:428 [inline]
  __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
  sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
  asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702

Last potentially related work creation:
  kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
  __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541
  __call_rcu_common kernel/rcu/tree.c:3106 [inline]
  call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210
  refdst_drop include/net/dst.h:263 [inline]
  skb_dst_drop include/net/dst.h:275 [inline]
  nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline]
  nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485
  ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143
  ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153
  ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959
  rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
  rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  sock_write_iter+0x2dd/0x400 net/socket.c:1160
do_iter_readv_writev+0x60a/0x890

Fixes: 0625491493d9 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netpoll: do not export netpoll_poll_[disable|enable]()

netpoll_poll_disable() and netpoll_poll_enable() are only used
from core networking code, there is no need to export them.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path

Source the ethtool library from the correct path and avoid the following
error:

./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory

Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: fix receiving fraglist GSO packets

When assembling fraglist GSO packets, udp4_gro_complete does not set
skb->csum_start, which makes the extra validation in __udp_gso_segment fail.

Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240819150621.59833-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-pm-fix-ids-not-being-reusable'

Matthieu Baerts says:

====================
mptcp: pm: fix IDs not being reusable

Here are more fixes for the MPTCP in-kernel path-manager. In this
series, the fixes are around the endpoint IDs not being reusable for
on-going connections when re-creating endpoints with previously used IDs.

- Patch 1 fixes this case for endpoints being used to send ADD_ADDR.
  Patch 2 validates this fix. The issue is present since v5.10.

- Patch 3 fixes this case for endpoints being used to establish new
  subflows. Patch 4 validates this fix. The issue is present since v5.10.

- Patch 5 fixes this case when all endpoints are flushed. Patch 6
  validates this fix. The issue is present since v5.13.

- Patch 7 removes a helper that is confusing, and introduced in v5.10.
  It helps simplifying the next patches.

- Patch 8 makes sure a 'subflow' counter is only decremented when
  removing a 'subflow' endpoint. Can be backported up to v5.13.

- Patch 9 is similar, but for a 'signal' counter. Can be backported up
  to v5.10.

- Patch 10 checks the last max accepted ADD_ADDR limit before accepting
  new ADD_ADDR. For v5.10 as well.

- Patch 11 removes a wrong restriction for the userspace PM, added
  during a refactoring in v6.5.

- Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow
  using the source address of the initial subflow is created. Patch 13
  covers this case. This issue is present since v5.15.

- Patch 14 avoid possible UaF when selecting an address from the
  endpoints list.
====================

Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: avoid possible UaF when selecting endp

select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.

A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.

Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: validate fullmesh endp on 1st sf

This case was not covered, and the wrong ID was set before the previous
commit.

The rest is not modified, it is just that it will increase the code
coverage.

The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.

Fixes: 4f49d63352da ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: fullmesh: select the right ID later

When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.

It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.

Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.

Fixes: 1a0d6136c5f0 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: only in-kernel cannot have entries with ID 0

The ID 0 is specific per MPTCP connections. The per netns entries cannot
have this special ID 0 then.

But that's different for the userspace PM where the entries are per
connection, they can then use this special ID 0.

Fixes: f40be0db0b76 ("mptcp: unify pm get_flags_and_ifindex_by_id")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: check add_addr_accept_max before accepting new ADD_ADDR

The limits might have changed in between, it is best to check them
before accepting new ADD_ADDR.

Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-10-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: only decrement add_addr_accepted for MPJ req

Adding the following warning ...

WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)

... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.

Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.

A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR.

Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: only mark 'subflow' endp as available

Adding the following warning ...

WARN_ON_ONCE(msk->pm.local_addr_used == 0)

... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.

Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.

Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before.

Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: remove mptcp_pm_remove_subflow()

This helper is confusing. It is in pm.c, but it is specific to the
in-kernel PM and it cannot be used by the userspace one. Also, it simply
calls one in-kernel specific function with the PM lock, while the
similar mptcp_pm_remove_addr() helper requires the PM lock.

What's left is the pr_debug(), which is not that useful, because a
similar one is present in the only function called by this helper:

mptcp_pm_nl_rm_subflow_received()

After these modifications, this helper can be marked as 'static', and
the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows().

Note that it is not a bug fix, but it will help backporting the
following commits.

Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: test for flush/re-add endpoints

After having flushed endpoints that didn't cause the creation of new
subflows, it is important to check endpoints can be re-created, re-using
previously used IDs.

Before the previous commit, the client would not have been able to
re-create the subflow that was previously rejected.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: re-using ID of unused flushed subflows

If no subflows are attached to the 'subflow' endpoints that are being
flushed, the corresponding addr IDs will not be marked as available
again.

Mark all ID as being available when flushing all the 'subflow'
endpoints, and reset local_addr_used counter to cover these cases.

Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for
flushing operations, not to remove a specific set of addresses and
subflows.

Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: check re-using ID of closed subflow

This test extends "delete and re-add" to validate the previous commit. A
new 'subflow' endpoint is added, but the subflow request will be
rejected. The result is that no subflow will be established from this
address.

Later, the endpoint is removed and re-added after having cleared the
firewall rule. Before the previous commit, the client would not have
been able to create this new subflow.

While at it, extra checks have been added to validate the expected
numbers of MPJ and RM_ADDR.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: re-using ID of unused removed subflows

If no subflow is attached to the 'subflow' endpoint that is being
removed, the addr ID will not be marked as available again.

Mark the linked ID as available when removing the 'subflow' endpoint if
no subflow is attached to it.

While at it, the local_addr_used counter is decremented if the ID was
marked as being used to reflect the reality, but also to allow adding
new endpoints after that.

Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: check re-using ID of unused ADD_ADDR

This test extends "delete re-add signal" to validate the previous
commit. An extra address is announced by the server, but this address
cannot be used by the client. The result is that no subflow will be
established to this address.

Later, the server will delete this extra endpoint, and set a new one,
with a valid address, but re-using the same ID. Before the previous
commit, the server would not have been able to announce this new
address.

While at it, extra checks have been added to validate the expected
numbers of MPJ, ADD_ADDR and RM_ADDR.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: pm: re-using ID of unused removed ADD_ADDR

If no subflow is attached to the 'signal' endpoint that is being
removed, the addr ID will not be marked as available again.

Mark the linked ID as available when removing the address entry from the
list to cover this case.

Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netem: fix return value if duplicate enqueue fails

There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.

This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.

There are two ways for the bug happen:

- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.

In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.

The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS.

Fixes: 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240819175753.5151-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Fix out-of-bound access

If an ATU violation was caused by a CPU Load operation, the SPID could
be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array).

Fixes: 75c05a74e745 ("net: dsa: mv88e6xxx: Fix counting of ATU violations")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240819235251.1331763-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: fix PTP config failure when using multiple ports

When performing the port_hwtstamp_set operation, ptp_schedule_worker()
will be called if hardware timestamoing is enabled on any of the ports.
When using multiple ports for PTP, port_hwtstamp_set is executed for
each port. When called for the first time ptp_schedule_worker() returns
0. On subsequent calls it returns 1, indicating the worker is already
scheduled. Currently the ksz driver treats 1 as an error and fails to
complete the port_hwtstamp_set operation, thus leaving the timestamping
configuration for those ports unchanged.

This patch fixes this by ignoring the ptp_schedule_worker() return
value.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/7aae307a-35ca-4209-a850-7b2749d40f90@martin-whitaker.me.uk
Fixes: bb01ad30570b0 ("net: dsa: microchip: ptp: manipulating absolute time using ptp hw clock")
Signed-off-by: Martin Whitaker <foss@martin-whitaker.me.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240817094141.3332-1-foss@martin-whitaker.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igb: cope with large MAX_SKB_FRAGS

Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.

An easy reproducer is to run ssh to connect to the machine. With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320

The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.

Address the issue by checking if 2K buffers are insufficient.

Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reported-by: Jan Tluka <jtluka@redhat.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://patch.msgid.link/20240816152034.1453285-1-vinschen@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cxgb4: add forgotten u64 ivlan cast before shift

It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match()
There is no reason it should not be done here

Found by Linux Verification Center (linuxtesting.org) with SVACE

Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Cc: stable@vger.kernel.org
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240819075408.92378-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-switch: Fix error checking in dpaa2_switch_seed_bp()

The dpaa2_switch_add_bufs() function returns the number of bufs that it
was able to add.  It returns BUFS_PER_CMD (7) for complete success or a
smaller number if there are not enough pages available.  However, the
error checking is looking at the total number of bufs instead of the
number which were added on this iteration.  Thus the error checking
only works correctly for the first iteration through the loop and
subsequent iterations are always counted as a success.

Fix this by checking only the bufs added in the current iteration.

Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/eec27f30-b43f-42b6-b8ee-04a6f83423b6@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: use internal pf id instead of function number

Use always the same pf id in devlink port number. When doing
pass-through the PF to VM bus info func number can be any value.

Fixes: 2ae0aa4758b0 ("ice: Move devlink port to PF/VF struct")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix truesize operations for PAGE_SIZE >= 8192

When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192,
truesize is calculated and stored in xdp_buff::frame_sz per each
processed Rx buffer. This means that frame_sz will contain the truesize
based on last received buffer, but commit 1dc1a7e7f410 ("ice:
Centrallize Rx buffer recycling") assumed this value will be constant
for each buffer, which breaks the page recycling scheme and mess up the
way we update the page::page_offset.

To fix this, let us work on constant truesize when PAGE_SIZE >= 8192
instead of basing this on size of a packet read from Rx descriptor. This
way we can simplify the code and avoid calculating truesize per each
received frame and on top of that when using
xdp_update_skb_shared_info(), current formula for truesize update will
be valid.

This means ice_rx_frame_truesize() can be removed altogether.
Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE
was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff()
in ice_vsi_cfg_rxq(). This should have been removed at the point where
xdp_buff struct started to be a member of ice_rx_ring and it was no
longer a stack based variable.

There are two fixes tags as my understanding is that the first one
exposed us to broken truesize and page_offset handling and then second
introduced broken skb_shared_info update in ice_{construct,build}_skb().

Reported-and-tested-by: Luiz Capitulino <luizcap@redhat.com>
Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/
Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling")
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix ICE_LAST_OFFSET formula

For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers.
Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not
ICE_RXBUF_2048.

Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag")
Suggested-by: Luiz Capitulino <luizcap@redhat.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix page reuse when PAGE_SIZE is over 8k

Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the
same as x86 currently, meaning reuse of a page should only take place
when no one else is busy with it.

Do two things independently of underlying PAGE_SIZE:
- store the page count under ice_rx_buf::pgcnt
- then act upon its value vs ice_rx_buf::pagecnt_bias when making the
decision regarding page reuse

Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge branch 'bonding-fix-xfrm-offload-bugs'

Nikolay Aleksandrov says:

====================
bonding: fix xfrm offload bugs

I noticed these problems while reviewing a bond xfrm patch recently.
The fixes are straight-forward, please review carefully the last one
because it has side-effects. This set has passed bond's selftests
and my custom bond stress tests which crash without these fixes.

Note the first patch is not critical, but it simplifies the next fix.
====================

Link: https://patch.msgid.link/20240816114813.326645-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: fix xfrm state handling when clearing active slave

If the active slave is cleared manually the xfrm state is not flushed.
This leads to xfrm add/del imbalance and adding the same state multiple
times. For example when the device cannot handle anymore states we get:
[ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
because it's filled with the same state after multiple active slave
clearings. This change also has a few nice side effects: user-space
gets a notification for the change, the old device gets its mac address
and promisc/mcast adjusted properly.

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: fix xfrm real_dev null pointer dereference

We shouldn't set real_dev to NULL because packets can be in transit and
xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume
real_dev is set.

Example trace:
kernel: BUG: unable to handle page fault for address: 0000000000001030
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: #PF: supervisor write access in kernel mode
kernel: #PF: error_code(0x0002) - not-present page
kernel: PGD 0 P4D 0
kernel: Oops: 0002 [#1] PREEMPT SMP
kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12
kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim]
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel:
kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60
kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00
kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014
kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000
kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000
kernel: FS:  00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0
kernel: bond0: (slave eni0np1): making interface the new active one
kernel: Call Trace:
kernel:  <TASK>
kernel:  ? __die+0x1f/0x60
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel:  ? page_fault_oops+0x142/0x4c0
kernel:  ? do_user_addr_fault+0x65/0x670
kernel:  ? kvm_read_and_reset_apf_flags+0x3b/0x50
kernel: bond0: (slave eni0np1): making interface the new active one
kernel:  ? exc_page_fault+0x7b/0x180
kernel:  ? asm_exc_page_fault+0x22/0x30
kernel:  ? nsim_bpf_uninit+0x50/0x50 [netdevsim]
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel:  ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim]
kernel: bond0: (slave eni0np1): making interface the new active one
kernel:  bond_ipsec_offload_ok+0x7b/0x90 [bonding]
kernel:  xfrm_output+0x61/0x3b0
kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
kernel:  ip_push_pending_frames+0x56/0x80

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: fix null pointer deref in bond_ipsec_offload_ok

We must check if there is an active slave before dereferencing the pointer.

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: fix bond_ipsec_offload_ok return type

Fix the return type which should be bool.

Fixes: 955b785ec6b3 ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ip6_tunnel: Fix broken GRO

GRO code checks for matching layer 2 headers to see, if packet belongs
to the same flow and because ip6 tunnel set dev->hard_header_len
this check fails in cases, where it shouldn't. To fix this don't
set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c
does.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

kcm: Serialise kcm_sendmsg() for the same socket.

syzkaller reported UAF in kcm_release(). [0]

The scenario is

  1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb.

  2. Thread A resumes building skb from kcm->seq_skb but is blocked
     by sk_stream_wait_memory()

  3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb
     and puts the skb to the write queue

  4. Thread A faces an error and finally frees skb that is already in the
     write queue

  5. kcm_release() does double-free the skb in the write queue

When a thread is building a MSG_MORE skb, another thread must not touch it.

Let's add a per-sk mutex and serialise kcm_sendmsg().

[0]:
BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline]
BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline]
BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167

CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G    B              6.8.0-rc5-syzkaller-g9abbc24128bc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call trace:
dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x178/0x518 mm/kasan/report.c:488
kasan_report+0xd8/0x138 mm/kasan/report.c:601
__asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
__skb_unlink include/linux/skbuff.h:2366 [inline]
__skb_dequeue include/linux/skbuff.h:2385 [inline]
__skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
__skb_queue_purge include/linux/skbuff.h:3181 [inline]
kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
__sock_release net/socket.c:659 [inline]
sock_close+0xa4/0x1e8 net/socket.c:1421
__fput+0x30c/0x738 fs/file_table.c:376
____fput+0x20/0x30 fs/file_table.c:404
task_work_run+0x230/0x2e0 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x618/0x1f64 kernel/exit.c:871
do_group_exit+0x194/0x22c kernel/exit.c:1020
get_signal+0x1500/0x15ec kernel/signal.c:2893
do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249
do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148
exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Allocated by task 6166:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626
unpoison_slab_object mm/kasan/common.c:314 [inline]
__kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3813 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903
__alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1296 [inline]
kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
sock_sendmsg+0x220/0x2c0 net/socket.c:768
splice_to_socket+0x7cc/0xd58 fs/splice.c:889
do_splice_from fs/splice.c:941 [inline]
direct_splice_actor+0xec/0x1d8 fs/splice.c:1164
splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108
do_splice_direct_actor fs/splice.c:1207 [inline]
do_splice_direct+0x1e4/0x304 fs/splice.c:1233
do_sendfile+0x460/0xb3c fs/read_write.c:1295
__do_sys_sendfile64 fs/read_write.c:1362 [inline]
__se_sys_sendfile64 fs/read_write.c:1348 [inline]
__arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1348
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Freed by task 6167:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x5c/0x74 mm/kasan/generic.c:640
poison_slab_object+0x124/0x18c mm/kasan/common.c:241
__kasan_slab_free+0x3c/0x78 mm/kasan/common.c:257
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2121 [inline]
slab_free mm/slub.c:4299 [inline]
kmem_cache_free+0x15c/0x3d4 mm/slub.c:4363
kfree_skbmem+0x10c/0x19c
__kfree_skb net/core/skbuff.c:1109 [inline]
kfree_skb_reason+0x240/0x6f4 net/core/skbuff.c:1144
kfree_skb include/linux/skbuff.h:1244 [inline]
kcm_release+0x104/0x4c8 net/kcm/kcmsock.c:1685
__sock_release net/socket.c:659 [inline]
sock_close+0xa4/0x1e8 net/socket.c:1421
__fput+0x30c/0x738 fs/file_table.c:376
____fput+0x20/0x30 fs/file_table.c:404
task_work_run+0x230/0x2e0 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x618/0x1f64 kernel/exit.c:871
do_group_exit+0x194/0x22c kernel/exit.c:1020
get_signal+0x1500/0x15ec kernel/signal.c:2893
do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249
do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148
exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

The buggy address belongs to the object at ffff0000ced0fc80
which belongs to the cache skbuff_head_cache of size 240
The buggy address is located 0 bytes inside of
freed 240-byte region [ffff0000ced0fc80, ffff0000ced0fd70)

The buggy address belongs to the physical page:
page:00000000d35f4ae4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10ed0f
flags: 0x5ffc00000000800(slab|node=0|zone=2|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 05ffc00000000800 ffff0000c1cbf640 fffffdffc3423100 dead000000000004
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff0000ced0fb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0000ced0fc00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff0000ced0fc80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
ffff0000ced0fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc
ffff0000ced0fd80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b72d86aa5df17ce74c60
Tested-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240815220437.69511-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mctp: test: Use correct skb for route input check

In the MCTP route input test, we're routing one skb, then (when delivery
is expected) checking the resulting routed skb.

However, we're currently checking the original skb length, rather than
the routed skb. Check the routed skb instead; the original will have
been freed at this point.

Fixes: 8892c0490779 ("mctp: Add route input to socket tests")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kernel-janitors/4ad204f0-94cf-46c5-bdab-49592addf315@kili.mountain/
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240816-mctp-kunit-skb-fix-v1-1-3c367ac89c27@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: prevent concurrent execution of tcp_sk_exit_batch

Its possible that two threads call tcp_sk_exit_batch() concurrently,
once from the cleanup_net workqueue, once from a task that failed to clone
a new netns. In the latter case, error unwinding calls the exit handlers
in reverse order for the 'failed' netns.

tcp_sk_exit_batch() calls tcp_twsk_purge().
Problem is that since commit b099ce2602d8 ("net: Batch inet_twsk_purge"),
this function picks up twsk in any dying netns, not just the one passed
in via exit_batch list.

This means that the error unwind of setup_net() can "steal" and destroy
timewait sockets belonging to the exiting netns.

This allows the netns exit worker to proceed to call

WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount));

without the expected 1 -> 0 transition, which then splats.

At same time, error unwind path that is also running inet_twsk_purge()
will splat as well:

WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210
...
refcount_dec include/linux/refcount.h:351 [inline]
inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70
inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221
inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304
tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522
ops_exit_list+0x128/0x180 net/core/net_namespace.c:178
setup_net+0x714/0xb40 net/core/net_namespace.c:375
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110

... because refcount_dec() of tw_refcount unexpectedly dropped to 0.

This doesn't seem like an actual bug (no tw sockets got lost and I don't
see a use-after-free) but as erroneous trigger of debug check.

Add a mutex to force strict ordering: the task that calls tcp_twsk_purge()
blocks other task from doing final _dec_and_test before mutex-owner has
removed all tw sockets of dying netns.

Fixes: e9bd0cca09d1 ("tcp: Don't allocate tcp_death_row outside of struct netns_ipv4.")
Reported-by: syzbot+8ea26396ff85d23a8929@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000003a5292061f5e4e19@google.com/
Link: https://lore.kernel.org/netdev/20240812140104.GA21559@breakpoint.cc/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240812222857.29837-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-udpgro-fixes'

Hangbin Liu says:

====================
selftests: Fix udpgro failures

There are 2 issues for the current udpgro test. The first one is the testing
doesn't record all the failures, which may report pass but the test actually
failed. e.g.
https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout

The other one is after commit d7db7775ea2e ("net: veth: do not manipulate
GRO when using XDP"), there is no need to load xdp program to enable GRO
on veth device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: udpgro: no need to load xdp for gro

After commit d7db7775ea2e ("net: veth: do not manipulate GRO when using
XDP"), there is no need to load XDP program to enable GRO. On the other
hand, the current test is failed due to loading the XDP program. e.g.

# selftests: net: udpgro.sh
# ipv4
#  no GRO              ok
#  no GRO chk cmsg     ok
#  GRO                 ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720
#
# failed

[...]

#  bad GRO lookup      ok
#  multiple GRO socks  ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# failed
ok 1 selftests: net: udpgro.sh

After fix, all the test passed.

# ./udpgro.sh
ipv4
  no GRO                                  ok
  [...]
  multiple GRO socks                      ok

Fixes: d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP")
Reported-by: Yi Chen <yiche@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-53858
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: udpgro: report error when receive failed

Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.

Before:
  bad GRO lookup       ok
  multiple GRO socks   ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520

./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520

failed
$ echo $?
0

After:
  bad GRO lookup       ok
  multiple GRO socks   ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520

./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520

failed
$ echo $?
1

Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-net-2024-08-15' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- MGMT: Add error handling to pair_device()
- HCI: Invert LE State quirk to be opt-out rather then opt-in
- hci_core: Fix LE quote calculation
- SMP: Fix assumption of Central always being Initiator

* tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Add error handling to pair_device()
  Bluetooth: SMP: Fix assumption of Central always being Initiator
  Bluetooth: hci_core: Fix LE quote calculation
  Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in
====================

Link: https://patch.msgid.link/20240815171950.1082068-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tc-testing: don't access non-existent variable on exception

Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped")
the variable test_ordinal doesn't exist in call_pre_case().
So it should not be accessed when an exception occurs.

This resolves the following splat:

  ...
  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File ".../tdc.py", line 1028, in <module>
      main()
    File ".../tdc.py", line 1022, in main
      set_operation_mode(pm, parser, args, remaining)
    File ".../tdc.py", line 966, in set_operation_mode
      catresults = test_runner_serial(pm, args, alltests)
    File ".../tdc.py", line 642, in test_runner_serial
      (index, tsr) = test_runner(pm, args, alltests)
    File ".../tdc.py", line 536, in test_runner
      res = run_one_test(pm, args, index, tidx)
    File ".../tdc.py", line 419, in run_one_test
      pm.call_pre_case(tidx)
    File ".../tdc.py", line 146, in call_pre_case
      print('test_ordinal is {}'.format(test_ordinal))
  NameError: name 'test_ordinal' is not defined

Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped")
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-misc-fixes-2024-08-15'

Tariq Toukan says:

====================
mlx5 misc fixes 2024-08-15

This patchset provides misc bug fixes from the team to the mlx5 driver.
====================

Link: https://patch.msgid.link/20240815071611.2211873-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix IPsec RoCE MPV trace call

Prevent the call trace below from happening, by not allowing IPsec
creation over a slave, if master device doesn't support IPsec.

WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94
Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec
ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci]
CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2
Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021
Workqueue: events xfrm_state_gc_task
RIP: 0010:down_read+0x75/0x94
Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0
RSP: 0018:ffffb26387773da8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000
RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540
R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905
FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0
Call Trace:
<TASK>
? show_trace_log_lvl+0x1d6/0x2f9
? show_trace_log_lvl+0x1d6/0x2f9
? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core]
? down_read+0x75/0x94
? __warn+0x80/0x113
? down_read+0x75/0x94
? report_bug+0xa4/0x11d
? handle_bug+0x35/0x8b
? exc_invalid_op+0x14/0x75
? asm_exc_invalid_op+0x16/0x1b
? down_read+0x75/0x94
? down_read+0xe/0x94
mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core]
mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core]
tx_destroy+0x1b/0xc0 [mlx5_core]
tx_ft_put+0x53/0xc0 [mlx5_core]
mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core]
___xfrm_state_destroy+0x10f/0x1a2
xfrm_state_gc_task+0x81/0xa9
process_one_work+0x1f1/0x3c6
worker_thread+0x53/0x3e4
? process_one_work.cold+0x46/0x3c
kthread+0x127/0x144
? set_kthread_struct+0x60/0x52
ret_from_fork+0x22/0x2d
</TASK>
---[ end trace 5ef7896144d398e1 ]---

Fixes: dfbd229abeee ("net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240815071611.2211873-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: XPS, Fix oversight of Multi-PF Netdev changes

The offending commit overlooked the Multi-PF Netdev changes.

Revert mlx5e_set_default_xps_cpumasks to incorporate Multi-PF Netdev
changes.

Fixes: bcee093751f8 ("net/mlx5e: Modifying channels number and updating TX queues")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240815071611.2211873-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: SHAMPO, Release in progress headers

The change in the fixes tag cleaned up too much: it removed the part
that was releasing header pages that were posted via UMR but haven't
been acknowledged yet on the ICOSQ.

This patch corrects this omission by setting the bits between pi and ci
to on when shutting down a queue with SHAMPO. To be consistent with the
Striding RQ code, this action is done in mlx5e_free_rx_missing_descs().

Fixes: e839ac9a89cb ("net/mlx5e: SHAMPO, Simplify header page release in teardown")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240815071611.2211873-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: SHAMPO, Fix page leak

When SHAMPO is used, a receive queue currently almost always leaks one
page on shutdown.

A page has MLX5E_SHAMPO_WQ_HEADER_PER_PAGE (8) headers. These headers
are tracked in the SHAMPO bitmap. Each page is released when the last
header index in the group is processed. During header allocation, there
can be leftovers from a page that will be used in a subsequent
allocation. This is normally fine, except for the following  scenario
(simplified a bit):

1) Allocate N new page fragments, showing only the relevant last 4
   fragments:

    0: new page
    1: new page
    2: new page
    3: new page
    4: page from previous allocation
    5: page from previous allocation
    6: page from previous allocation
    7: page from previous allocation

2) NAPI processes header indices 4-7 because they are the oldest
   allocated. Bit 7 will be set to 0.

3) Receive queue shutdown occurs. All the remaining bits are being
   iterated on to release the pages. But the page assigned to header
   indices 0-3 will not be freed due to what happened in step 2.

This patch fixes the issue by making sure that on allocation, header
fragments are always allocated in groups of
MLX5E_SHAMPO_WQ_HEADER_PER_PAGE so that there is never a partial page
left over between allocations.

A more appropriate fix would be a refactoring of
mlx5e_alloc_rx_hd_mpwqe() and mlx5e_build_shampo_hd_umr(). But this
refactoring is too big for net. It will be targeted for net-next.

Fixes: e839ac9a89cb ("net/mlx5e: SHAMPO, Simplify header page release in teardown")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240815071611.2211873-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'vln-ocelot-fixes'

Vladimir Oltean says:

====================
VLAN fixes for Ocelot driver

This is a collection of patches I've gathered over the past several
months.

Patches 1-6/14 are supporting patches for selftests.

Patch 9/14 fixes PTP TX from a VLAN upper of a VLAN-aware bridge port
when using the "ocelot-8021q" tagging protocol. Patch 7/14 is its
supporting selftest.

Patch 10/14 fixes the QoS class used by PTP in the same case as above.
It is hard to quantify - there is no selftest.

Patch 11/14 fixes potential data corruption during PTP TX in the same
case as above. Again, there is no selftest.

Patch 13/14 fixes RX in the same case as above - 8021q upper of a
VLAN-aware bridge port, with the "ocelot-8021q" tagging protocol. Patch
12/14 is a supporting patch for this in the DSA core, and 7/14 is also
its selftest.

Patch 14/14 ensures that VLAN-aware bridges offloaded to Ocelot only
react to the ETH_P_8021Q TPID, and treat absolutely everything else as
VLAN-untagged, including ETH_P_8021AD. Patch 8/14 is the supporting
selftest.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untagged

I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0]
and realized that not only is its basic VLAN classification pipeline
improper for offloading vlan_protocol 802.1ad bridges, but also improper
for offloading regular 802.1Q bridges already.

Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by
bridged ports, but this switch treats it as if it was 802.1Q-tagged with
the same VID as in the 802.1ad header. This is markedly different to
what the Linux bridge expects; see the "other_tpid()" function in
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh.

An idea came to me that the VCAP IS1 TCAM is more powerful than I'm
giving it credit for, and that it actually overwrites the classified VID
before the VLAN Table lookup takes place. In other words, it can be
used even to save a packet from being dropped on ingress due to VLAN
membership.

Add a sophisticated TCAM rule hardcoded into the driver to force the
switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol
802.1Q.

Regarding the lifetime of the filter: eventually the bridge will
disappear, and vlan_filtering on the port will be restored to 0 for
standalone mode. Then the filter will be deleted.

[0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/

Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: felix: fix VLAN tag loss on CPU reception with ocelot-8021q

There is a major design bug with ocelot-8021q, which is that it expects
more of the hardware than the hardware can actually do. The short
summary of the issue is that when a port is under a VLAN-aware bridge
and we use this tagging protocol, VLAN upper interfaces of this port do
not see RX traffic.

We use VCAP ES0 (egress rewriter) rules towards the tag_8021q CPU port
to encapsulate packets with an outer tag, later stripped by software,
that depends on the source user port. We do this so that packets can be
identified in ocelot_rcv(). To be precise, we create rules with
push_outer_tag = OCELOT_ES0_TAG and push_inner_tag = 0.

With this configuration, we expect the switch to keep the inner tag
configuration as found in the packet (if it was untagged on user port
ingress, keep it untagged, otherwise preserve the VLAN tag unmodified
as the inner tag towards the tag_8021q CPU port). But this is not what
happens.

Instead, table "Tagging Combinations" from the user manual suggests
that when the ES0 action is "PUSH_OUTER_TAG=1 and PUSH_INNER_TAG=0",
there will be "no inner tag". Experimentation further clarifies what
this means.

It appears that this "inner tag" which is not pushed into the packet on
its egress towards the CPU is none other than the classified VLAN.

When the ingress user port is standalone or under a VLAN-unaware bridge,
the classified VLAN is a discardable quantity: it is a fixed value - the
result of ocelot_vlan_unaware_pvid()'s configuration, and actually
independent of the VID from any 802.1Q header that may be in the frame.
It is actually preferable to discard the "inner tag" in this case.

The problem is when the ingress port is under a VLAN-aware bridge.
Then, the classified VLAN is taken from the frame's 802.1Q header, with
a fallback on the bridge port's PVID. It would be very good to not
discard the "inner tag" here, because if we do, we break communication
with any 8021q VLAN uppers that the port might have. These have a
processing path outside the bridge.

There seems to be nothing else we can do except to change the
configuration for VCAP ES0 rules, to actually push the inner VLAN into
the frame. There are 2 options for that, first is to push a fixed value
specified in the rule, and second is to push a fixed value, plus
(aka arithmetic +) the classified VLAN. We choose the second option,
and we select that fixed value as 0. Thus, what is pushed in the inner
tag is just the classified VLAN.

From there, we need to perform software untagging, in the receive path,
of stuff that was untagged on the wire.

Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: provide a software untagging function on RX for VLAN-aware bridges

Through code analysis, I realized that the ds->untag_bridge_pvid logic
is contradictory - see the newly added FIXME above the kernel-doc for
dsa_software_untag_vlan_unaware_bridge().

Moreover, for the Felix driver, I need something very similar, but which
is actually _not_ contradictory: untag the bridge PVID on RX, but for
VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges.

Since I don't want to change the functionality of drivers which were
supposedly properly tested with the ds->untag_bridge_pvid flag, I have
introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have
refactored the DSA reception code into a common path for both flags.

TODO: both flags should be unified under a single ds->software_vlan_untag,
which users of both current flags should set. This is not something that
can be carried out right away. It needs very careful examination of all
drivers which make use of this functionality, since some of them
actually get this wrong in the first place.

For example, commit 9130c2d30c17 ("net: dsa: microchip: ksz8795: Use
software untagging on CPU port") uses this in a driver which has
ds->configure_vlan_while_not_filtering = true. The latter mechanism has
been known for many years to be broken by design:
https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/
and we have the situation of 2 bugs canceling each other. There is no
private VLAN, and the port follows the PVID of the VLAN-unaware bridge.
So, it's kinda ok for that driver to use the ds->untag_bridge_pvid
mechanism, in a broken way.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: serialize access to the injection/extraction groups

As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add
spinlock for frame transmission from CPU") which is for a similar
hardware design, multiple CPUs can simultaneously perform injection
or extraction. There are only 2 register groups for injection and 2
for extraction, and the driver only uses one of each. So we'd better
serialize access using spin locks, otherwise frame corruption is
possible.

Note that unlike in sparx5, FDMA in ocelot does not have this issue
because struct ocelot_fdma_tx_ring already contains an xmit_lock.

I guess this is mostly a problem for NXP LS1028A, as that is dual core.
I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka
the felix DSA driver) started using register-based packet injection and
extraction.

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"

There are 2 distinct code paths (listed below) in the source code which
set up an injection header for Ocelot(-like) switches. Code path (2)
lacks the QoS class and source port being set correctly. Especially the
improper QoS classification is a problem for the "ocelot-8021q"
alternative DSA tagging protocol, because we support tc-taprio and each
packet needs to be scheduled precisely through its time slot. This
includes PTP, which is normally assigned to a traffic class other than
0, but would be sent through TC 0 nonetheless.

The code paths are:

(1) ocelot_xmit_common() from net/dsa/tag_ocelot.c - called only by the
    standard "ocelot" DSA tagging protocol which uses NPI-based
    injection - sets up bit fields in the tag manually to account for
    a small difference (destination port offset) between Ocelot and
    Seville. Namely, ocelot_ifh_set_dest() is omitted out of
    ocelot_xmit_common(), because there's also seville_ifh_set_dest().

(2) ocelot_ifh_set_basic(), called by:
    - ocelot_fdma_prepare_skb() for FDMA transmission of the ocelot
      switchdev driver
    - ocelot_port_xmit() -> ocelot_port_inject_frame() for
      register-based transmission of the ocelot switchdev driver
    - felix_port_deferred_xmit() -> ocelot_port_inject_frame() for the
      DSA tagger ocelot-8021q when it must transmit PTP frames (also
      through register-based injection).
    sets the bit fields according to its own logic.

The problem is that (2) doesn't call ocelot_ifh_set_qos_class().
Copying that logic from ocelot_xmit_common() fixes that.

Unfortunately, although desirable, it is not easily possible to
de-duplicate code paths (1) and (2), and make net/dsa/tag_ocelot.c
directly call ocelot_ifh_set_basic()), because of the ocelot/seville
difference. This is the "minimal" fix with some logic duplicated (but
at least more consolidated).

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and register injection

Problem description
-------------------

On an NXP LS1028A (felix DSA driver) with the following configuration:

- ocelot-8021q tagging protocol
- VLAN-aware bridge (with STP) spanning at least swp0 and swp1
- 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700
- ptp4l on swp0.700 and swp1.700

we see that the ptp4l instances do not see each other's traffic,
and they all go to the grand master state due to the
ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition.

Jumping to the conclusion for the impatient
-------------------------------------------

There is a zero-day bug in the ocelot switchdev driver in the way it
handles VLAN-tagged packet injection. The correct logic already exists in
the source code, in function ocelot_xmit_get_vlan_info() added by commit
5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit").
But it is used only for normal NPI-based injection with the DSA "ocelot"
tagging protocol. The other injection code paths (register-based and
FDMA-based) roll their own wrong logic. This affects and was noticed on
the DSA "ocelot-8021q" protocol because it uses register-based injection.

By moving ocelot_xmit_get_vlan_info() to a place that's common for both
the DSA tagger and the ocelot switch library, it can also be called from
ocelot_port_inject_frame() in ocelot.c.

We need to touch the lines with ocelot_ifh_port_set()'s prototype
anyway, so let's rename it to something clearer regarding what it does,
and add a kernel-doc. ocelot_ifh_set_basic() should do.

Investigation notes
-------------------

Debugging reveals that PTP event (aka those carrying timestamps, like
Sync) frames injected into swp0.700 (but also swp1.700) hit the wire
with two VLAN tags:

00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc
                                              ~~~~~~~~~~~
00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00
          ~~~~~~~~~~~
00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03
00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00
00000040: 00 00

The second (unexpected) VLAN tag makes felix_check_xtr_pkt() ->
ptp_classify_raw() fail to see these as PTP packets at the link
partner's receiving end, and return PTP_CLASS_NONE (because the BPF
classifier is not written to expect 2 VLAN tags).

The reason why packets have 2 VLAN tags is because the transmission
code treats VLAN incorrectly.

Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX
feature. Therefore, at xmit time, all VLANs should be in the skb head,
and none should be in the hwaccel area. This is done by:

static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb,
  netdev_features_t features)
{
if (skb_vlan_tag_present(skb) &&
    !vlan_hw_offload_capable(features, skb->vlan_proto))
skb = __vlan_hwaccel_push_inside(skb);
return skb;
}

But ocelot_port_inject_frame() handles things incorrectly:

ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb));

void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op)
{
(...)
if (vlan_tag)
ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
(...)
}

The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head
is by calling:

static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb)
{
skb->vlan_present = 0;
}

which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get().
This means that ocelot, when it calls skb_vlan_tag_get(), sees
(and uses) a residual skb->vlan_tci, while the same VLAN tag is
_already_ in the skb head.

The trivial fix for double VLAN headers is to replace the content of
ocelot_ifh_port_set() with:

if (skb_vlan_tag_present(skb))
ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));

but this would not be correct either, because, as mentioned,
vlan_hw_offload_capable() is false for us, so we'd be inserting dead
code and we'd always transmit packets with VID=0 in the injection frame
header.

I can't actually test the ocelot switchdev driver and rely exclusively
on code inspection, but I don't think traffic from 8021q uppers has ever
been injected properly, and not double-tagged. Thus I'm blaming the
introduction of VLAN fields in the injection header - early driver code.

As hinted at in the early conclusion, what we _want_ to happen for
VLAN transmission was already described once in commit 5ca721c54d86
("net: dsa: tag_ocelot: set the classified VLAN during xmit").

ocelot_xmit_get_vlan_info() intends to ensure that if the port through
which we're transmitting is under a VLAN-aware bridge, the outer VLAN
tag from the skb head is stripped from there and inserted into the
injection frame header (so that the packet is processed in hardware
through that actual VLAN). And in all other cases, the packet is sent
with VID=0 in the injection frame header, since the port is VLAN-unaware
and has logic to strip this VID on egress (making it invisible to the
wire).

Fixes: 08d02364b12f ("net: mscc: fix the injection header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: bridge_vlan_aware: test that other TPIDs are seen as untagged

The bridge VLAN implementation w.r.t. VLAN protocol is described in
merge commit 1a0b20b25732 ("Merge branch 'bridge-next'"). We are only
sensitive to those VLAN tags whose TPID is equal to the bridge's
vlan_protocol. Thus, an 802.1ad VLAN should be treated as 802.1Q-untagged.

Add 3 tests which validate that:
- 802.1ad-tagged traffic is learned into the PVID of an 802.1Q-aware
  bridge
- Double-tagged traffic is forwarded when just the PVID of the port is
  present in the VLAN group of the ports
- Double-tagged traffic is not forwarded when the PVID of the port is
  absent from the VLAN group of the ports

The test passes with both veth and ocelot.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: add PTP frames to the mix

A breakage in the felix DSA driver shows we do not have enough test
coverage. More generally, it is sufficiently special that it is likely
drivers will treat it differently.

This is not meant to be a full PTP test, it just makes sure that PTP
packets sent to the different addresses corresponding to their profiles
are received correctly. The local_termination selftest seemed like the
most appropriate place for this addition.

PTP RX/TX in some cases makes no sense (over a bridge) and this is why
$skip_ptp exists. And in others - PTP over a bridge port - the IP stack
needs convincing through the available bridge netfilter hooks to leave
the PTP packets alone and not stolen by the bridge rx_handler. It is
safe to assume that users have that figured out already. This is a
driver level test, and by using tcpdump, all that extra setup is out of
scope here.

send_non_ip() was an unfinished idea; written but never used.
Replace it with a more generic send_raw(), and send 3 PTP packet types
times 3 transports.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: don't use xfail_on_veth()

xfail_on_veth() for this test is an incorrect approximation which gives
false positives and false negatives.

When local_termination fails with "reception succeeded, but should have failed",
it is because the DUT ($h2) accepts packets even when not configured as
promiscuous. This is not something specific to veth; even the bridge
behaves that way, but this is not captured by the xfail_on_veth test.

The IFF_UNICAST_FLT flag is not explicitly exported to user space, but
it can somewhat be determined from the interface's behavior. We have to
create a macvlan upper with a different MAC address. This forces a
dev_uc_add() call in the kernel. When the unicast filtering list is
not empty, but the device doesn't support IFF_UNICAST_FLT,
__dev_set_rx_mode() force-enables promiscuity on the interface, to
ensure correct behavior (that the requested address is received).

We can monitor the change in the promiscuity flag and infer from it
whether the device supports unicast filtering.

There is no equivalent thing for allmulti, unfortunately. We never know
what's hiding behind a device which has allmulti=off. Whether it will
actually perform RX multicast filtering of unknown traffic is a strong
"maybe". The bridge driver, for example, completely ignores the flag.
We'll have to keep the xfail behavior, but instead of XFAIL on just
veth, always XFAIL.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: introduce new tests which capture VLAN behavior

Add more coverage to the local termination selftest as follows:
- 8021q upper of $h2
- 8021q upper of $h2, where $h2 is a port of a VLAN-unaware bridge
- 8021q upper of $h2, where $h2 is a port of a VLAN-aware bridge
- 8021q upper of VLAN-unaware br0, which is the upper of $h2
- 8021q upper of VLAN-aware br0, which is the upper of $h2

Especially the cases with traffic sent through the VLAN upper of a
VLAN-aware bridge port will be immediately relevant when we will start
transmitting PTP packets as an additional kind of traffic.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: add one more test for VLAN-aware bridges

The current bridge() test is for packet reception on a VLAN-unaware
bridge. Some things are different enough with VLAN-aware bridges that
it's worth renaming this test into vlan_unaware_bridge(), and add a new
vlan_aware_bridge() test.

The two will share the same implementation: bridge() becomes a common
function, which receives $vlan_filtering as an argument. Rename it to
test_bridge() at the same time, because just bridge() pollutes the
global namespace and we cannot invoke the binary with the same name from
the iproute2 package currently.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: parameterize test name

There are upcoming tests which verify the RX filtering of a bridge
(or bridge port), but under differing vlan_filtering conditions.
Since we currently print $h2 (the DUT) in the log_test() output, it
becomes necessary to make a further distinction between tests, to not
give the user the impression that the exact same thing is run twice.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: parameterize sending interface

In future changes we will want to subject the DUT, $h2, to additional
VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as
a sending interface, rather than the currently hardcoded $h1.

Add a parameter to run_test() and modify its 2 callers to explicitly
pass $h1, as was implicit before.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: local_termination: refactor macvlan creation/deletion

This will be used in other subtests as well; make new macvlan_create()
and macvlan_destroy() functions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: add selftests to network drivers

tools/testing/selftests/drivers/net/ is not listed under
networking entries. Add it to NETWORKING DRIVERS.

Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240814142832.3473685-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops

The driver currently blindly deletes its cache of RSS cotexts and
ntuple filters when the ethtool channel count is changing. It also
deletes the ntuple filters cache when the default indirection table
is changing.

The core will not allow ethtool channels to drop below any that
have been configured as ntuple destinations since this commit from 2022:

47f3ecf4763d ("ethtool: Fail number of channels change when it conflicts with rxnfc")

So there is absolutely no need to delete the ntuple filters and
RSS contexts when changing ethtool channels.

It is also unnecessary to delete ntuple filters when the default
RSS indirection table is changing.

Remove bnxt_clear_usr_fltrs() and bnxt_clear_rss_ctxis() from the
ethtool ops and change them to static functions.

This bug will cause confusion to the end user and causes failure when
running the rss_ctx.py selftest.

Fixes: 1018319f949c ("bnxt_en: Invalidate user filters when needed")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240725111912.7bc17cf6@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240814225429.199280-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio_net: move netdev_tx_reset_queue() call before RX napi enable

During suspend/resume the following BUG was hit:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in: bluetooth ecdh_generic ecc libaes
CPU: 1 PID: 1282 Comm: rtcwake Not tainted
6.10.0-rc3-00732-gc8bd1f7f3e61 #15240
Hardware name: Generic DT based system
PC is at dql_completed+0x270/0x2cc
LR is at __free_old_xmit+0x120/0x198
pc : [<c07ffa54>]    lr : [<c0c42bf4>]    psr: 80000013
...
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 43a4406a  DAC: 00000051
...
Process rtcwake (pid: 1282, stack limit = 0xfbc21278)
Stack: (0xe0805e80 to 0xe0806000)
...
Call trace:
  dql_completed from __free_old_xmit+0x120/0x198
  __free_old_xmit from free_old_xmit+0x44/0xe4
  free_old_xmit from virtnet_poll_tx+0x88/0x1b4
  virtnet_poll_tx from __napi_poll+0x2c/0x1d4
  __napi_poll from net_rx_action+0x140/0x2b4
  net_rx_action from handle_softirqs+0x11c/0x350
  handle_softirqs from call_with_stack+0x18/0x20
  call_with_stack from do_softirq+0x48/0x50
  do_softirq from __local_bh_enable_ip+0xa0/0xa4
  __local_bh_enable_ip from virtnet_open+0xd4/0x21c
  virtnet_open from virtnet_restore+0x94/0x120
  virtnet_restore from virtio_device_restore+0x110/0x1f4
  virtio_device_restore from dpm_run_callback+0x3c/0x100
  dpm_run_callback from device_resume+0x12c/0x2a8
  device_resume from dpm_resume+0x12c/0x1e0
  dpm_resume from dpm_resume_end+0xc/0x18
  dpm_resume_end from suspend_devices_and_enter+0x1f0/0x72c
  suspend_devices_and_enter from pm_suspend+0x270/0x2a0
  pm_suspend from state_store+0x68/0xc8
  state_store from kernfs_fop_write_iter+0x10c/0x1cc
  kernfs_fop_write_iter from vfs_write+0x2b0/0x3dc
  vfs_write from ksys_write+0x5c/0xd4
  ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe8bf1fa8 to 0xe8bf1ff0)
...
---[ end trace 0000000000000000 ]---

After virtnet_napi_enable() is called, the following path is hit:
  __napi_poll()
    -> virtnet_poll()
      -> virtnet_poll_cleantx()
        -> netif_tx_wake_queue()

That wakes the TX queue and allows skbs to be submitted and accounted by
BQL counters.

Then netdev_tx_reset_queue() is called that resets BQL counters and
eventually leads to the BUG in dql_completed().

Move virtnet_napi_tx_enable() what does BQL counters reset before RX
napi enable to avoid the issue.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/netdev/e632e378-d019-4de7-8f13-07c572ab37a9@samsung.com/
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814122500.1710279-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.11-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter

  Current release - regressions:

   - udp: fall back to software USO if IPv6 extension headers are
     present

   - wifi: iwlwifi: correctly lookup DMA address in SG table

  Current release - new code bugs:

   - eth: mlx5e: fix queue stats access to non-existing channels splat

  Previous releases - regressions:

   - eth: mlx5e: take state lock during tx timeout reporter

   - eth: mlxbf_gige: disable RX filters until RX path initialized

   - eth: igc: fix reset adapter logics when tx mode change

  Previous releases - always broken:

   - tcp: update window clamping condition

   - netfilter:
      - nf_queue: drop packets with cloned unconfirmed conntracks
      - nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests

   - vsock: fix recursive ->recvmsg calls

   - dsa: vsc73xx: fix MDIO bus access and PHY opera

   - eth: gtp: pull network headers in gtp_dev_xmit()

   - eth: igc: fix packet still tx after gate close by reducing i226 MAC
     retry buffer

   - eth: mana: fix RX buf alloc_size alignment and atomic op panic

   - eth: hns3: fix a deadlock problem when config TC during resetting"

* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  net: hns3: use correct release function during uninitialization
  net: hns3: void array out of bound when loop tnl_num
  net: hns3: fix a deadlock problem when config TC during resetting
  net: hns3: use the user's cfg after reset
  net: hns3: fix wrong use of semaphore up
  selftests: net: lib: kill PIDs before del netns
  pse-core: Conditionally set current limit during PI regulator registration
  net: thunder_bgx: Fix netdev structure allocation
  net: ethtool: Allow write mechanism of LPL and both LPL and EPL
  vsock: fix recursive ->recvmsg calls
  selftest: af_unix: Fix kselftest compilation warnings
  netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
  netfilter: nf_tables: Introduce nf_tables_getobj_single
  netfilter: nf_tables: Audit log dump reset after the fact
  selftests: netfilter: add test for br_netfilter+conntrack+queue combination
  netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
  netfilter: flowtable: initialise extack before use
  netfilter: nfnetlink: Initialise extack before use in ACKs
  netfilter: allow ipv6 fragments to arrive on different devices
  tcp: Update window clamping condition
  ...

Merge tag 'media/v6.11-3' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
"Two regression fixes:

   - fix atomisp support for ISP2400

   - fix dvb-usb regression for TeVii s480 dual DVB-S2 S660 board"

* tag 'media/v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: atomisp: Fix streaming no longer working on BYT / ISP2400 devices
  media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"

Merge tag 'ata-6.11-rc4' of git://git./linux/kernel/git/libata/linux

Pull ata fix from Niklas Cassel:

- Revert a recent change to sense data generation.

   Sense data can be in either fixed format or descriptor format.

   The D_SENSE bit in the Control mode page controls which format to
   generate. All places but one respected the D_SENSE bit.

   The recent change fixed the one place that didn't respect the D_SENSE
   bit. However, it turns out that hdparm, hddtemp and udisks
   (incorrectly) assumes sense data in descriptor format.

   Therefore, even while the change was technically correct, revert it,
   since even if these user space programs are fixed to (correctly) look
   at the format type before parsing the data, older versions of these
   tools will be around roughly forever.

* tag 'ata-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"

Bluetooth: MGMT: Add error handling to pair_device()

hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.

Fixed by adding error handling in the function.

Cc: Stable <stable@kernel.org>
Fixes: 5157b8a503fa ("Bluetooth: Fix initializing conn_params in scan phase")
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Reported-by: Yiwei Zhang <zhan4630@purdue.edu>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: SMP: Fix assumption of Central always being Initiator

SMP initiator role shall be considered the one that initiates the
pairing procedure with SMP_CMD_PAIRING_REQ:

BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part H
page 1557:

Figure 2.1: LE pairing phases

Note that by sending SMP_CMD_SECURITY_REQ it doesn't change the role to
be Initiator.

Link: https://github.com/bluez/bluez/issues/567
Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_core: Fix LE quote calculation

Function hci_sched_le needs to update the respective counter variable
inplace other the likes of hci_quote_sent would attempt to use the
possible outdated value of conn->{le_cnt,acl_cnt}.

Link: https://github.com/bluez/bluez/issues/915
Fixes: 73d80deb7bdf ("Bluetooth: prioritizing data over HCI")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in

This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.

Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'nf-24-08-15' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
   reasm, from Tom Hughes.

2) Initialize extack for begin/end netlink message marker in batch,
   from Donald Hunter.

3) Initialize extack for flowtable offload support, also from Donald.

4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
   later it should be possible to explore lookup after reinject but
   Florian prefers this approach at this stage. From Florian Westphal.

5) Add selftest for cloned unconfirmed conntracks in nfqueue for
   previous update.

6) Audit after filling netlink header successfully in object dump,
   from Phil Sutter.

7-8) Fix concurrent dump and reset which could result in underflow
     counter / quota objects.

netfilter pull request 24-08-15

* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
  netfilter: nf_tables: Introduce nf_tables_getobj_single
  netfilter: nf_tables: Audit log dump reset after the fact
  selftests: netfilter: add test for br_netfilter+conntrack+queue combination
  netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
  netfilter: flowtable: initialise extack before use
  netfilter: nfnetlink: Initialise extack before use in ACKs
  netfilter: allow ipv6 fragments to arrive on different devices
====================

Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://patch.msgid.link/20240813141024.1707252-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: use correct release function during uninitialization

pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.

Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: void array out of bound when loop tnl_num

When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array

Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix a deadlock problem when config TC during resetting

When config TC during the reset process, may cause a deadlock, the flow is
as below:
                             pf reset start
                                 │
                                 ▼
                              ......
setup tc                         │
    │                            ▼
    ▼                      DOWN: napi_disable()
napi_disable()(skip)             │
    │                            │
    ▼                            ▼
  ......                      ......
    │                            │
    ▼                            │
napi_enable()                    │
                                 ▼
                           UINIT: netif_napi_del()
                                 │
                                 ▼
                              ......
                                 │
                                 ▼
                           INIT: netif_napi_add()
                                 │
                                 ▼
                              ......                 global reset start
                                 │                      │
                                 ▼                      ▼
                           UP: napi_enable()(skip)    ......
                                 │                      │
                                 ▼                      ▼
                              ......                 napi_disable()

In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.

Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: use the user's cfg after reset

Consider the followed case that the user change speed and reset the net
interface. Before the hw change speed successfully, the driver get old
old speed from hw by timer task. After reset, the previous speed is config
to hw. As a result, the new speed is configed successfully but lost after
PF reset. The followed pictured shows more dirrectly.

+------+              +----+                 +----+
| USER |              | PF |                 | HW |
+---+--+              +-+--+                 +-+--+
    |  ethtool -s 100G  |                      |
    +------------------>|   set speed 100G     |
    |                   +--------------------->|
    |                   |  set successfully    |
    |                   |<---------------------+---+
    |                   |query cfg (timer task)|   |
    |                   +--------------------->|   | handle speed
    |                   |     return 200G      |   | changing event
    |  ethtool --reset  |<---------------------+   | (100G)
    +------------------>|  cfg previous speed  |<--+
    |                   |  after reset (200G)  |
    |                   +--------------------->|
    |                   |                      +---+
    |                   |query cfg (timer task)|   |
    |                   +--------------------->|   | handle speed
    |                   |     return 100G      |   | changing event
    |                   |<---------------------+   | (200G)
    |                   |                      |<--+
    |                   |query cfg (timer task)|
    |                   +--------------------->|
    |                   |     return 200G      |
    |                   |<---------------------+
    |                   |                      |
    v                   v                      v

This patch save new speed if hw change speed successfully, which will be
used after reset successfully.

Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix wrong use of semaphore up

Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.

So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.

Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: net: lib: kill PIDs before del netns

When deleting netns, it is possible to still have some tasks running,
e.g. background tasks like tcpdump running in the background, not
stopped because the test has been interrupted.

Before deleting the netns, it is then safer to kill all attached PIDs,
if any. That should reduce some noises after the end of some tests, and
help with the debugging of some issues. That's why this modification is
seen as a "fix".

Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pse-core: Conditionally set current limit during PI regulator registration

Fix an issue where `devm_regulator_register()` would fail for PSE
controllers that do not support current limit control, such as simple
GPIO-based controllers like the podl-pse-regulator. The
`REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now
conditionally set only if the `pi_set_current_limit` operation is
supported. This change prevents the regulator registration routine from
attempting to call `pse_pi_set_current_limit()`, which would return
`-EOPNOTSUPP` and cause the registration to fail.

Fixes: 4a83abcef5f4f ("net: pse-pd: Add new power limit get and set c33 features")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Kyle Swenson <kyle.swenson@est.tech>
Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: thunder_bgx: Fix netdev structure allocation

Commit 94833addfaba ("net: thunderx: Unembed netdev structure") had
a go at dynamically allocating the netdev structures for the thunderx_bgx
driver.  This change results in my ThunderX box catching fire (to be fair,
it is what it does best).

The issues with this change are that:

- bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and
  bgx_init_of_phy(), both expecting netdev to be a valid pointer.

- bgx_init_of_phy() populates the MAC addresses for *all* LMACs
  attached to a given BGX instance, and thus needs netdev for each of
  them to have been allocated.

There is a few things to be said about how the driver mixes LMAC and
BGX states which leads to this sorry state, but that's beside the point.

To address this, go back to a situation where all netdev structures
are allocated before the driver starts relying on them, and move the
freeing of these structures to driver removal. Someone brave enough
can always go and restructure the driver if they want.

Fixes: 94833addfaba ("net: thunderx: Unembed netdev structure")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethtool: Allow write mechanism of LPL and both LPL and EPL

CMIS 5.2 standard section 9.4.2 defines four types of firmware update
supported mechanism: None, only LPL, only EPL, both LPL and EPL.

Currently, only LPL (Local Payload) type of write firmware block is
supported. However, if the module supports both LPL and EPL the flashing
process wrongly fails for no supporting LPL.

Fix that, by allowing the write mechanism to be LPL or both LPL and
EPL.

Fixes: c4f78134d45c ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vsock: fix recursive ->recvmsg calls

After a vsock socket has been added to a BPF sockmap, its prot->recvmsg
has been replaced with vsock_bpf_recvmsg(). Thus the following
recursiion could happen:

vsock_bpf_recvmsg()
-> __vsock_recvmsg()
  -> vsock_connectible_recvmsg()
   -> prot->recvmsg()
    -> vsock_bpf_recvmsg() again

We need to fix it by calling the original ->recvmsg() without any BPF
sockmap logic in __vsock_recvmsg().

Fixes: 634f1a7110b4 ("vsock: support sockmap")
Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Cc: Bobby Eshleman <bobby.eshleman@bytedance.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'wireless-2024-08-14' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.11

We have few fixes to drivers. The most important here is a fix for
iwlwifi which caused major slowdowns for several users.

* tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: iwlwifi: correctly lookup DMA address in SG table
  wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
  wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion
  wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page
  wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850
====================

Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftest: af_unix: Fix kselftest compilation warnings

Change expected_buf from (const void *) to (const char *)
in function __recvpair().
This change fixes the below warnings during test compilation:

```
In file included from msg_oob.c:14:
msg_oob.c: In function ‘__recvpair’:

../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]

../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’

../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]

../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’
```

Fixes: d098d77232c3 ("selftest: af_unix: Add msg_oob.c.")
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-6.11-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- extend tree-checker verification of directory item type

- fix regression in page/folio and extent state tracking in xarray, the
   dirty status can get out of sync and can cause problems e.g. a hang

- in send, detect last extent and allow to clone it instead of sending
   it as write, reduces amount of data transferred in the stream

- fix checking extent references when cleaning deleted subvolumes

- fix one more case in the extent map shrinker, let it run only in the
   kswapd context so it does not cause latency spikes during other
   operations

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix invalid mapping of extent xarray state
  btrfs: send: allow cloning non-aligned extent if it ends at i_size
  btrfs: only run the extent map shrinker from kswapd tasks
  btrfs: tree-checker: reject BTRFS_FT_UNKNOWN dir type
  btrfs: check delayed refs when we're checking if a ref exists

netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests

Objects' dump callbacks are not concurrency-safe per-se with reset bit
set. If two CPUs perform a reset at the same time, at least counter and
quota objects suffer from value underrun.

Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.

Fixes: 43da04a593d8 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Introduce nf_tables_getobj_single

Outsource the reply skb preparation for non-dump getrule requests into a
distinct function. Prep work for object reset locking.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Audit log dump reset after the fact

In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:

* Add an early call to nfnetlink_unicast if not resetting which
  effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
  via earlier table lookup) to not rely upon validity of the looked up
  table pointer.
* Do not use local variable family, it will vanish.

Fixes: 8e6cf365e1d5 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

selftests: netfilter: add test for br_netfilter+conntrack+queue combination

Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
conntracks"):

WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..

because local delivery and forwarding will race for confirmation.

Based on a reproducer script from Yi Chen.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>