Rohit Agarwal [Fri, 17 Nov 2023 08:07:37 +0000 (13:37 +0530)]
arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support
Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-4-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Fri, 17 Nov 2023 08:07:36 +0000 (13:37 +0530)]
arm64: dts: qcom: Add USB3 and PHY support on SDX75
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
HS PHY on SDX75.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-3-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Fri, 17 Nov 2023 08:07:35 +0000 (13:37 +0530)]
arm64: dts: qcom: Add interconnect nodes for SDX75
Add interconnect nodes to support interconnects on SDX75.
Also parallely add the interconnect property for UART required
so that the bootup to shell does not break with interconnects
in place.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-2-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nia Espera [Sat, 11 Nov 2023 22:07:42 +0000 (23:07 +0100)]
arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
In a similar vein to
https://lore.kernel.org/lkml/
20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.
Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nia Espera [Sat, 11 Nov 2023 22:07:41 +0000 (23:07 +0100)]
arm64: dts: qcom: pm8350k: Remove hanging whitespace
pmk8350 has a random tab character inserted, so remove it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-3-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nia Espera [Sat, 11 Nov 2023 22:07:40 +0000 (23:07 +0100)]
arm64: dts: qcom: sm8350: Fix DMA0 address
DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.
Fixes:
bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes:
41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit address")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-2-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nia Espera [Sat, 11 Nov 2023 22:07:39 +0000 (23:07 +0100)]
dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
Bindings for a charger controller chip found on sm8350
Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-1-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 20:47:25 +0000 (21:47 +0100)]
arm64: dts: qcom: sc8180x: align APSS with bindings
SC8180x APSS Devicetree bindings expect qcom,sc8180x-apss-shared to use
qcom,sdm845-apss-shared fallback:
sc8180x-lenovo-flex-5g.dtb: mailbox@
17c00000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,sc8180x-apss-shared'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111204725.35707-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:29 +0000 (17:42 +0100)]
arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator
The Samsung S6SY761 touchscreen bindings expect AVDD regulator which is
missing in the Sony Xperia PDX225 DTS. There is however pinctrl setting
for in the touchscreen device node with similar name: "avdd", so assume
author wanted to control a fixed regulator with a GPIO.
This fixes dtbs_check warning:
sm6375-sony-xperia-murray-pdx225.dtb: touchscreen@48: 'avdd-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:28 +0000 (17:42 +0100)]
arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller
Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
warnings:
sm6125-xiaomi-laurel-sprout.dtb: usb@
4ef8800: 'interrupt-names' is a required property
sm6125-xiaomi-laurel-sprout.dtb: usb@
4ef8800: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'interrupts-extended' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes:
cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:27 +0000 (17:42 +0100)]
arm64: dts: qcom: sm6115: align mem timer size cells with bindings
Commit
70d1e09ebf19 ("arm64: dts: qcom: sm6115: Use 64 bit addressing")
converted all addresses to 64-bit addressing, but the ARMv7 memory
mapped architected timer bindings expect sizes up to 32-bit. Keep
64-bit addressing but change size of memory mapping to 32-bit
(size-cells=1) and adjust the ranges to match this.
This fixes dtbs_check warnings like:
sm6115p-lenovo-j606f.dtb: timer@
f120000: #size-cells:0:0: 1 was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:26 +0000 (17:42 +0100)]
arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':
sa8155p-adp.dtb: pci@
1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:25 +0000 (17:42 +0100)]
arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':
sc8180x-primus.dtb: pci@
1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 16:42:24 +0000 (17:42 +0100)]
arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':
sc8180x-lenovo-flex-5g.dtb: pci@
1c08000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 09:56:17 +0000 (10:56 +0100)]
arm64: dts: qcom: sdm845: correct Soundwire node name
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":
sdm845-db845c.dtb: swm@c85: $nodename:0: 'swm@c85' does not match '^soundwire(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231111095617.16496-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 09:56:16 +0000 (10:56 +0100)]
arm64: dts: qcom: sdm845-db845c: correct LED panic indicator
There is no "panic-indicator" default trigger but a property with that
name:
sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
Fixes:
3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 11 Nov 2023 09:46:23 +0000 (10:46 +0100)]
arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator
There is no "panic-indicator" default trigger but a property with that
name:
qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
Fixes:
b5cbd84e499a ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111094623.12476-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Thu, 9 Nov 2023 00:43:11 +0000 (00:43 +0000)]
arm64: dts: qcom: sm8250: Add wakeup-source to usb_1 and usb_2
To test out a different GDSC change I wanted to have a USB keypress resume
a system in suspend.
Adding wakeup-source to usb_1 and usb_2 "just works" for me on rb5.
Consistent with qcm2290 and sa8775p add wakeup-source to the dtsi for the
SoC.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231109004311.2449566-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Steev Klimaszewski [Wed, 8 Nov 2023 05:17:10 +0000 (23:17 -0600)]
arm64: dts: qcom: sdm850-lenovo-yoga: Add wakeup-sources
The keyboard and touchpad can be used to wake the machine
up from sleep, so mark them as such in the dts file.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231107-wakeup-source-v2-1-bf1562ef9367@kali.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Shazad Hussain [Tue, 7 Nov 2023 12:05:02 +0000 (17:35 +0530)]
arm64: dts: qcom: sa8775p-ride: enable pmm8654au_0_pon_resin
The volume down key is controlled by PMIC via the PON hardware on
sa8775p platform, so enable the same for sa8775p-ride.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Link: https://lore.kernel.org/r/20231107120503.28917-1-quic_shazhuss@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 10:35:40 +0000 (11:35 +0100)]
arm64: dts: qcom: sm8350: move DPU opp-table to its node
The Qualcomm MDSS bindings expect that DPU opp-table is defined within
DPU node:
sm8350-hdk.dtb: display-subsystem@
ae00000: Unevaluated properties are not allowed ('opp-table' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 10:35:39 +0000 (11:35 +0100)]
arm64: dts: qcom: sc8280xp-x13s: drop sound-dai-cells from eDisplayPort
Qualcomm MDSS Embedded DisplayPort bindings do not allow
sound-dai-cells:
sc8280xp-lenovo-thinkpad-x13s.dtb: displayport-controller@
aea0000: #sound-dai-cells: False schema does not allow [[0]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 10:35:38 +0000 (11:35 +0100)]
arm64: dts: qcom: sc8180x-primus: drop sound-dai-cells from eDisplayPort
Qualcomm MDSS Embedded DisplayPort bindings do not allow
sound-dai-cells:
sc8180x-primus.dtb: displayport-controller@
ae9a000: #sound-dai-cells: False schema does not allow [[0]]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 10:21:11 +0000 (11:21 +0100)]
arm64: dts: qcom: sm8250: correct Soundwire node name
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":
sm8250-xiaomi-elish-boe.dtb: soundwire-controller@
3250000: $nodename:0: 'soundwire-controller@
3250000' does not match '^soundwire(@.*)?$'
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231107102111.16465-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 10:21:10 +0000 (11:21 +0100)]
arm64: dts: qcom: sc8280xp: correct Soundwire node name
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":
sc8280xp-lenovo-thinkpad-x13s.dtb: soundwire-controller@
3210000: $nodename:0: 'soundwire-controller@
3210000' does not match '^soundwire(@.*)?$'
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231107102111.16465-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 08:04:17 +0000 (09:04 +0100)]
arm64: dts: qcom: qdu1000-idp: drop unused LLCC multi-ch-bit-off
There is no "multi-ch-bit-off" property in LLCC, according to bindings
and Linux driver:
qdu1000-idp.dtb: system-cache-controller@
19200000: 'multi-ch-bit-off' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20231107080417.16700-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 7 Nov 2023 08:04:16 +0000 (09:04 +0100)]
arm64: dts: qcom: qdu1000: correct LLCC reg entries
According to bindings and Linux driver there is no
"multi_channel_register" address space for LLCC. The first "reg" entry
is supposed to be llcc0_base since commit
43aa006e074c ("dt-bindings:
arm: msm: Fix register regions used for LLCC banks"):
qdu1000-idp.dtb: system-cache-controller@
19200000: reg: [[0,
421527552, 0,
14155776], [0,
438304768, 0, 524288], [0,
572293416, 0, 4]] is too long
qdu1000-idp.dtb: system-cache-controller@
19200000: reg-names:0: 'llcc0_base' was expected
qdu1000-idp.dtb: system-cache-controller@
19200000: reg-names: ['llcc_base', 'llcc_broadcast_base', 'multi_channel_register'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20231107080417.16700-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Mon, 6 Nov 2023 15:58:33 +0000 (16:58 +0100)]
arm64: dts: qcom: sm8450: fix soundwire controllers node name
Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@
31f0000: $nodename:0: 'soundwire-controller@
31f0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8450-upstream-soundwire-bindings-fix-v1-1-41d4844a5a7d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Mon, 6 Nov 2023 14:23:57 +0000 (15:23 +0100)]
arm64: dts: qcom: sm8550: fix soundwire controllers node name
Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@
6ab0000: $nodename:0: 'soundwire-controller@
6ab0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8550-upstream-soundwire-bindings-fix-v1-1-4ded91c805a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Thu, 26 Oct 2023 10:53:45 +0000 (11:53 +0100)]
arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks
similar to most of the sdmX, smX and now scX controllers.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-5-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Thu, 7 Dec 2023 16:01:58 +0000 (08:01 -0800)]
Merge branch '
20231026105345.3376-3-bryan.odonoghue@linaro.org' into arm64-for-6.8
Merge the SC8280XP Camera Clock Controller binding updates from the
topic branch, to gain access to clock defines to be used in DeviceTree
source.
Bryan O'Donoghue [Thu, 26 Oct 2023 10:53:43 +0000 (11:53 +0100)]
dt-bindings: clock: Add SC8280XP CAMCC
Add device tree bindings for the camera clock controller on
Qualcomm SC8280XP platform.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Thu, 26 Oct 2023 10:53:42 +0000 (11:53 +0100)]
dt-bindings: clock: Use gcc.yaml for common clock properties
Various of the camcc bindings are repeated serially. We can use
qcom,gcc.yaml to encapsulate the generic repeated patterns.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Mukesh Ojha [Wed, 25 Oct 2023 17:06:41 +0000 (22:36 +0530)]
arm64: dts: qcom: sm8550: Enable download mode register write
Enable download mode setting for sm8550 which can help collect
ramdump for this SoC.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1698253601-11957-4-git-send-email-quic_mojha@quicinc.com
[bjorn: Updated tcsr offset, per Mukesh correction]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Mukesh Ojha [Wed, 25 Oct 2023 17:06:40 +0000 (22:36 +0530)]
arm64: dts: qcom: sm8350: Add TCSR halt register space
Enable download mode for sm8350 which can help collect
ramdump for this SoC.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1698253601-11957-3-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Mukesh Ojha [Wed, 25 Oct 2023 17:06:39 +0000 (22:36 +0530)]
arm64: dts: qcom: sm8250: Add TCSR halt register space
Enable download mode for sm8250 which can help collect
ramdump for this SoC.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1698253601-11957-2-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Kathiravan Thirumoorthy [Wed, 25 Oct 2023 16:42:12 +0000 (22:12 +0530)]
arm64: dts: qcom: ipq5018: add few more reserved memory regions
Like all other IPQ SoCs, bootloader will collect the system RAM contents
upon crash for the post morterm analysis. If we don't reserve the memory
region used by bootloader, obviously linux will consume it and upon next
boot on crash, bootloader will be loaded in the same region, which will
lead to loose some of the data, sometimes we may miss out critical
information. So lets reserve the region used by the bootloader.
Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.
While at it, enable the SMEM support along with TCSR mutex.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231025-ipq5018-misc-v1-1-7d14fde97fe7@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Kathiravan Thirumoorthy [Wed, 25 Oct 2023 13:50:05 +0000 (19:20 +0530)]
arm64: dts: qcom: ipq5332: add missing properties to the GPIO LED node
Add the color and function property to the GPIO LED node, which are
missed out in the initial submission.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025-ipq5332-gpio-led-v1-1-0f0f52617648@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Kathiravan Thirumoorthy [Wed, 25 Oct 2023 13:31:25 +0000 (19:01 +0530)]
arm64: dts: qcom: ipq9574: enable GPIO based LED
Add support for wlan-2g LED on GPIO64.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025-ipq9574-led-v2-1-59b2725697ad@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Caleb Connolly [Wed, 25 Oct 2023 11:58:00 +0000 (12:58 +0100)]
arm64: dts: qcom: qrb2210-rb1: use USB host mode
The default for the QCM2290 platform that this board is based on is OTG
mode, however the role detection logic is not hooked up for this board
and the dwc3 driver is configured to not allow role switching from
userspace.
Force this board to host mode as this is the preferred usecase until we
get role switching hooked up.
Fixes:
e18771961336 ("arm64: dts: qcom: Add initial QTI RB1 device tree")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231025-b4-rb1-usb-host-v1-1-522616c575ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:35 +0000 (14:43 -0800)]
arm64: dts: qcom: sm6350: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.8.Ic1d4402e99c70354d501ccd98105e908a902f671@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:34 +0000 (14:43 -0800)]
arm64: dts: qcom: sc8280xp: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.7.I1c8ab71570f6906fd020decb80675f05fbe1fe74@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:33 +0000 (14:43 -0800)]
arm64: dts: qcom: sa8775p: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
09b701b89a76 ("arm64: dts: qcom: sa8775p: add the watchdog node")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231106144335.v2.6.I909b7c4453d7b7fb0db4b6e49aa21666279d827d@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:32 +0000 (14:43 -0800)]
arm64: dts: qcom: sm8250: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
46a4359f9156 ("arm64: dts: qcom: sm8250: Add watchdog bark interrupt")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.5.I2910e7c10493d896841e9785c1817df9b9a58701@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:31 +0000 (14:43 -0800)]
arm64: dts: qcom: sm8150: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
b094c8f8dd2a ("arm64: dts: qcom: sm8150: Add watchdog bark interrupt")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.4.I23d0aa6c8f1fec5c26ad9b3c610df6f4c5392850@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:30 +0000 (14:43 -0800)]
arm64: dts: qcom: sdm845: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
36c436b03c58 ("arm64: dts: qcom: sdm845: Add watchdog bark interrupt")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.3.I16675ebe5517c68453a1bd7f4334ff885f806c03@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:29 +0000 (14:43 -0800)]
arm64: dts: qcom: sc7280: Make watchdog bark interrupt edge triggered
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes:
0e51f883daa9 ("arm64: dts: qcom: sc7280: Add APSS watchdog node")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.2.I11f77956d2492c88aca0ef5462123f225caf4fb4@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Douglas Anderson [Mon, 6 Nov 2023 22:43:28 +0000 (14:43 -0800)]
arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered
On sc7180 when the watchdog timer fires your logs get filled with:
watchdog0: pretimeout event
watchdog0: pretimeout event
watchdog0: pretimeout event
...
watchdog0: pretimeout event
If you're using console-ramoops to debug crashes the above gets quite
annoying since it blows away any other log messages that might have
been there.
The issue is that the "bark" interrupt (AKA the "pretimeout"
interrupt) remains high until the watchdog is pet. Since we've got
things configured as "level" triggered we'll keep getting interrupted
over and over.
Let's switch to edge triggered. Now we'll get one interrupt when the
"bark" interrupt goes off and won't get another one until the "bark"
interrupt is cleared and asserts again.
This matches how many older Qualcomm SoCs have things configured.
Fixes:
28cc13e4060c ("arm64: dts: qcom: sc7180: Add watchdog bark interrupt")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231106144335.v2.1.Ic7577567baff921347d423b722de8b857602efb1@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 12 Nov 2023 18:44:30 +0000 (19:44 +0100)]
arm64: dts: qcom: sc8180x: drop duplicated PCI iommus property
The IOMMUs for PCI controller on SC8180x are defined in iommu-map, so
drop duplicared iommus:
sc8180x-lenovo-flex-5g.dtb: pci@
1c08000: Unevaluated properties are not allowed ('iommus' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231112184430.3495-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Sat, 25 Nov 2023 12:05:34 +0000 (13:05 +0100)]
dt-bindings: arm: qcom: Add HTC One Mini 2
Document the compatible for the MSM8926-based HTC One Mini 2 smartphone.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-htc-memul-v3-2-e8f4c5839e23@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Sat, 25 Nov 2023 12:05:33 +0000 (13:05 +0100)]
dt-bindings: vendor-prefixes: document HTC Corporation
Add the vendor prefix for HTC (https://www.htc.com/).
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-htc-memul-v3-1-e8f4c5839e23@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Wed, 29 Nov 2023 14:05:37 +0000 (15:05 +0100)]
arm64: dts: qcom: sm8550: correct TX Soundwire clock
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
Fixes:
61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231129140537.161720-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Wed, 29 Nov 2023 14:05:36 +0000 (15:05 +0100)]
arm64: dts: qcom: sm8450: correct TX Soundwire clock
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
Fixes:
14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129140537.161720-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Fri, 1 Dec 2023 00:11:10 +0000 (16:11 -0800)]
arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity
The hall sensor interrupt on the Primus is active low, which means that
with the current configuration the device attempts to suspend when the
LID is open.
Fix the polarity of the HALL_INT GPIO to avoid this.
Fixes:
2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-sc8180x-primus-lid-polarity-v1-1-da917b59604b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Johan Hovold [Mon, 16 Oct 2023 08:06:58 +0000 (10:06 +0200)]
arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible
The sc8280xp Display Port PHYs can be used in either DP or eDP mode and
this is configured using the devicetree compatible string which defaults
to DP mode in the SoC dtsi.
Override the default compatible string for the CRD eDP PHY node so that
the eDP settings are used.
Fixes:
4a883a8d80b5 ("arm64: dts: qcom: sc8280xp-crd: Enable EDP")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231016080658.6667-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Sun, 15 Oct 2023 20:06:56 +0000 (22:06 +0200)]
arm64: dts: qcom: sdm632-fairphone-fp3: Enable LPASS
Enable the LPASS/ADSP found on the phone.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231015-fp3-lpass-v1-1-4d46a399a035@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Raymond Hackley [Tue, 17 Oct 2023 13:00:11 +0000 (13:00 +0000)]
arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED
Acer Iconia Talk S A1-724 uses KTD2026 LED driver. However, there is
no blue LED on it. Add it to the device tree.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231017125848.84311-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Robert Marko [Sat, 21 Oct 2023 12:00:07 +0000 (14:00 +0200)]
arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
IPQ6018 comes in multiple SKU-s and some of them dont support all of the
OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only
supported OPP-s based on the SoC dynamically.
As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only
goes up to 1.5GHz and is marked as such via an eFuse.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021120048.231239-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Lukas Walter [Sat, 21 Oct 2023 14:30:25 +0000 (16:30 +0200)]
arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree
This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone
released in 2015.
Add device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI (internal and external storage)
- WCNSS (BT/WIFI)
- Sensors (accelerometer and proximity)
- Vibrator
- Touchscreen
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Signed-off-by: Lukas Walter <lukas.walter@aceart.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021143025.77088-2-lukas.walter@aceart.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Lukas Walter [Sat, 21 Oct 2023 14:30:24 +0000 (16:30 +0200)]
dt-bindings: arm: qcom: Add Huawei Honor 5X / GR5 (2016)
Add a compatible for Huawei Honor 5X / GR5 (2016).
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lukas Walter <lukas.walter@aceart.de>
Link: https://lore.kernel.org/r/20231021143025.77088-1-lukas.walter@aceart.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Sat, 25 Nov 2023 12:19:28 +0000 (13:19 +0100)]
arm64: dts: qcom: msm8953: Use non-deprecated qcom,domain in LPASS
Use the qcom,domain property instead of the deprecated qcom,apr-domain,
which in turn also fixes a bunch of dtbs_checks warnings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-msm8953-misc-fixes-v2-2-df86655841d9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Wed, 29 Nov 2023 14:44:09 +0000 (15:44 +0100)]
arm64: dts: qcom: qrb2210-rb1: add wifi variant property
The RB1 platform doesn't have board-specific board-id programmed, it uses
generic 0xff. Thus add the property with the 'variant' of the
calibration data.
Note: the driver will check for the calibration data for the following
IDs, so existing board-2.bin files will continue to work.
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1'
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120'
- 'bus=snoc,qmi-board-id=ff'
For the reference, the board is identified by the driver in the
following way:
ath10k_snoc
c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
ath10k_snoc
c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
ath10k_snoc
c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc
c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc
c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32
b3d4b790
ath10k_snoc
c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-12-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:08 +0000 (15:44 +0100)]
arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller
Enable the Microchip mcp2518fd hosted on the SPI5 bus.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-11-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:07 +0000 (15:44 +0100)]
arm64: dts: qcom: qrb2210-rb1: Set up HDMI
Add the required nodes to support display output via the HDMI port.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-10-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:06 +0000 (15:44 +0100)]
arm64: dts: qcom: qcm2290: Hook up interconnects
Add interconnect provider nodes and hook up interconnects to consumer
devices, including bwmon.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-9-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:05 +0000 (15:44 +0100)]
arm64: dts: qcom: qcm2290: Add display nodes
Add the required nodes to support display on QCM2290.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-8-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:04 +0000 (15:44 +0100)]
arm64: dts: qcom: sc7280: Add the missing MDSS icc path
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-7-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 29 Nov 2023 14:44:03 +0000 (15:44 +0100)]
arm64: dts: qcom: sc7180: Add the missing MDSS icc path
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-6-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Thu, 30 Nov 2023 14:58:23 +0000 (15:58 +0100)]
arm64: dts: qcom: sc8280xp: Add QMP handle to RPMh stats
When a handle to QMP is accessible, we can query even more internal
power management stats. Add it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-ddr_sleep_stats-v1-3-5981c2e764b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Jianhua Lu [Sun, 26 Nov 2023 02:28:49 +0000 (10:28 +0800)]
arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg
Add type-c node to feature otg function and set usb-role-switch property
for usb_1_dwc3 to enable usb otg.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231126022849.14273-2-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Jianhua Lu [Sun, 26 Nov 2023 02:28:48 +0000 (10:28 +0800)]
arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
There are two typos in this dtsi, so fix it.
classis -> chassis.
80700000 ->
80600000
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20231126022849.14273-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
André Apitzsch [Sun, 26 Nov 2023 21:46:20 +0000 (22:46 +0100)]
arm64: dts: qcom: msm8939-longcheer-l9100: Add proximity-near-level
Consider an object near to the sensor when their distance is about 4 cm
or below.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20231126-bqm5_prox-v2-1-b7defc3979ac@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Mon, 27 Nov 2023 11:23:28 +0000 (12:23 +0100)]
arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
Enable the QCA bluetooth on RB2. It identifies like the following:
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40020150
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x01500201
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-topic-rb2_bt-v2-2-4bbf266258ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Mon, 27 Nov 2023 11:23:27 +0000 (12:23 +0100)]
arm64: dts: qcom: sm6115: Add UART3
Hook up UART3, usually used for communicating with a Bluetooth module.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-topic-rb2_bt-v2-1-4bbf266258ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Mon, 27 Nov 2023 21:55:38 +0000 (22:55 +0100)]
arm64: dts: qcom: sdm632-fairphone-fp3: Enable WiFi/Bluetooth
Configure and enable the WCNSS which provides WiFi and Bluetooth on this
device using the WCN3680B chip.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231127-fp3-wcnss-v2-1-a5154fae4768@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stephen Boyd [Wed, 29 Nov 2023 03:04:41 +0000 (19:04 -0800)]
dt-bindings: arm: qcom: Fix html link
This link got broken by commit
e790a4ce5290 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes:
e790a4ce5290 ("arm: docs: Move Arm documentation to Documentation/arch/")
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Komal Bajaj [Wed, 29 Nov 2023 06:58:16 +0000 (12:28 +0530)]
arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
QCS6490 SoC. This adds debug uart and usb support along
with regulators found on this board.
Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-4-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Komal Bajaj [Wed, 29 Nov 2023 06:58:15 +0000 (12:28 +0530)]
arm64: dts: qcom: Add base qcm6490 idp board dts
Add DTS for Qualcomm IDP platform using QCM6490 SoC.
This adds debug uart, eMMC and usb support along with
regulators found on this board.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Komal Bajaj [Wed, 29 Nov 2023 06:58:14 +0000 (12:28 +0530)]
dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board
Document the qcom,qcm6490-idp and qcs6490-rb3gen2 boards.
qcm6490-idp based off qcm6490 SoC derived from sc7280 meant for
various form factor including IoT and qcs6490-rb3gen2 based off
qcs6490 SoC derivative of qcm6490 without internal modem.
Co-developed by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Tengfei Fan [Wed, 29 Nov 2023 10:33:24 +0000 (18:33 +0800)]
arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios
Some gpios are reserved for other subsystems, so mark these reserved
gpios.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129103325.24854-6-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Tengfei Fan [Wed, 29 Nov 2023 10:33:23 +0000 (18:33 +0800)]
arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
Add uart support for QRD4450 for enable uart console.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-5-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Tengfei Fan [Wed, 29 Nov 2023 10:33:22 +0000 (18:33 +0800)]
arm64: dts: qcom: sm4450: add uart console support
Add base description of UART and TLMM nodes which helps SM4450
boot to shell with console on boards with this SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Tengfei Fan [Wed, 29 Nov 2023 10:33:21 +0000 (18:33 +0800)]
arm64: dts: qcom: sm4450: Add RPMH and Global clock
Add device node for RPMH and Global clock controller on Qualcomm
SM4450 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Ajit Pandey [Wed, 29 Nov 2023 10:33:20 +0000 (18:33 +0800)]
arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
Add apps_rsc node and cmd_db memory region for sm4450.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-2-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Robert Marko [Fri, 13 Oct 2023 16:39:34 +0000 (18:39 +0200)]
arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to
find them by matching globaly by name.
If not passed directly, driver maintains backwards compatibility by then
falling back to global lookup.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-2-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Robert Marko [Fri, 13 Oct 2023 16:39:33 +0000 (18:39 +0200)]
dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
QMP PCI PHY PIPE clocks are inputs for the GCC clock controller.
In order to describe this in DTS, allow passing them as the inputs to GCC.
This has a benefit that it avoids doing a global matching by name.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Gianluca Boiano [Fri, 13 Oct 2023 11:05:31 +0000 (13:05 +0200)]
arm64: dts: qcom: msm8953: add SPI interfaces
This change add spi_3, spi_5 and spi_6 interfaces to
MSM8953 devices.
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013110531.84140-1-morf3089@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Fri, 13 Oct 2023 08:09:56 +0000 (10:09 +0200)]
arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
Configure the thermals for the QUIET_THERM, CAM_FLASH_THERM, MSM_THERM
and RFC_CAM_THERM thermistors connected to PM7325.
With this PMIC the software communication to the ADC is going through
PMK7325 (= PMK8350).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-4-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Fri, 13 Oct 2023 08:09:55 +0000 (10:09 +0200)]
arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals
Configure the thermals for the XO_THERM line connected to PMK7325 (named
in software PMK8350).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-3-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Fri, 13 Oct 2023 08:09:54 +0000 (10:09 +0200)]
arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
thermistors connected to PM7250B.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-2-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Fri, 13 Oct 2023 08:09:53 +0000 (10:09 +0200)]
iio: adc: Add PM7325 PMIC7 ADC bindings
Add the defines for the ADC channels found on the PM7325. The list is
taken from downstream msm-5.4 and adjusted for mainline.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-1-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Manivannan Sadhasivam [Thu, 12 Oct 2023 17:21:29 +0000 (22:51 +0530)]
arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Thu, 12 Oct 2023 17:21:28 +0000 (22:51 +0530)]
arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sridharan S N [Wed, 27 Sep 2023 09:31:30 +0000 (15:01 +0530)]
dt-bindings: arm: qcom: drop the IPQ board types
IPQ bootloaders do not need these information to select the
the DTB blob. So dropping the board names from board section.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230927093130.4098385-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Gokul Sriram Palanisamy [Mon, 25 Sep 2023 10:28:26 +0000 (15:58 +0530)]
arm64: dts: qcom: ipq5018: enable the CPUFreq support
Add the APCS, A53 PLL, cpu-opp-table nodes to set
the CPU frequency at 800MHz (idle) or 1.008GHz.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230925102826.405446-4-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 24 Aug 2023 21:19:50 +0000 (00:19 +0300)]
arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-15-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 24 Aug 2023 21:19:49 +0000 (00:19 +0300)]
arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-14-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 24 Aug 2023 21:19:48 +0000 (00:19 +0300)]
arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-13-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 24 Aug 2023 21:19:47 +0000 (00:19 +0300)]
arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-12-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 24 Aug 2023 21:19:46 +0000 (00:19 +0300)]
arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>