git.monstr.eu Git - linux-2.6-microblaze.git/log

qlcnic: make the array random_data static const, makes object smaller

Don't populate the array random_data on the stack but instead it
static const. Makes the object code smaller by 66 bytes.

Before:
   text    data     bss     dec     hex filename
  52895   10976       0   63871    f97f ../qlogic/qlcnic/qlcnic_ethtool.o

After:
   text    data     bss     dec     hex filename
  52701   11104       0   63805    f93d ../qlogic//qlcnic/qlcnic_ethtool.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801151659.146113-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: make the array name static, makes object smaller

Don't populate the const array name on the stack but instead it
static. Makes the object code smaller by 28 bytes. Add a missing
const to clean up a checkpatch warning.

Before:
   text    data   bss     dec     hex filename
124565   31565   384  156514   26362 drivers/net/ethernet/marvell/sky2.o

After:
   text    data   bss     dec     hex filename
124441   31661   384  156486   26346 drivers/net/ethernet/marvell/sky2.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801150647.145728-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cxgb4: make the array match_all_mac static, makes object smaller

Don't populate the array match_all_mac on the stack but instead it
static const. Makes the object code smaller by 75 bytes.

Before:
   text    data     bss     dec     hex filename
  46701    8960      64   55725    d9ad ../chelsio/cxgb4/cxgb4_filter.o

After:
   text    data     bss     dec     hex filename
  46338    9120     192   55650    d962 ../chelsio/cxgb4/cxgb4_filter.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801151205.145924-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: Fix refcount warning for new fib_info

Ioana reported a refcount warning when booting over NFS:

[    5.042532] ------------[ cut here ]------------
[    5.047184] refcount_t: addition on 0; use-after-free.
[    5.052324] WARNING: CPU: 7 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xa4/0x150
...
[    5.167201] Call trace:
[    5.169635]  refcount_warn_saturate+0xa4/0x150
[    5.174067]  fib_create_info+0xc00/0xc90
[    5.177982]  fib_table_insert+0x8c/0x620
[    5.181893]  fib_magic.isra.0+0x110/0x11c
[    5.185891]  fib_add_ifaddr+0xb8/0x190
[    5.189629]  fib_inetaddr_event+0x8c/0x140

fib_treeref needs to be set after kzalloc. The old code had a ++ which
led to the confusion when the int was replaced by a refcount_t.

Fixes: 79976892f7ea ("net: convert fib_treeref from int to refcount_t")
Signed-off-by: David Ahern <dsahern@kernel.org>
Reported-by: Ioana Ciornei <ciorneiioana@gmail.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20210802160221.27263-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: make some arrays static const, makes object smaller

Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 280 bytes.

Before:
   text    data     bss     dec     hex filename
  24142    4368     192   28702    701e ./drivers/net/phy/mscc/mscc_ptp.o

After:
   text    data     bss     dec     hex filename
  23830    4400     192   28422    6f06 ./drivers/net/phy/mscc/mscc_ptp.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801070155.139057-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netdevsim: make array res_ids static const, makes object smaller

Don't populate the array res_ids on the stack but instead it
static const. Makes the object code smaller by 14 bytes.

Before:
   text    data     bss     dec     hex filename
  50833    8314     256   59403    e80b ./drivers/net/netdevsim/fib.o

After:
   text    data     bss     dec     hex filename
  50755    8378     256   59389    e7fd ./drivers/net/netdevsim/fib.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801065328.138906-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/ipv4: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:

$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
union {
struct {
__be32     imsf_multiaddr_aux;   /*     0     4 */
__be32     imsf_interface_aux;   /*     4     4 */
__u32      imsf_fmode_aux;       /*     8     4 */
__u32      imsf_numsrc_aux;      /*    12     4 */
__be32     imsf_slist[1];        /*    16     4 */
};                                       /*     0    20 */
struct {
__be32     imsf_multiaddr;       /*     0     4 */
__be32     imsf_interface;       /*     4     4 */
__u32      imsf_fmode;           /*     8     4 */
__u32      imsf_numsrc;          /*    12     4 */
__be32     imsf_slist_flex[0];   /*    16     0 */
};                                       /*     0    16 */
};                                               /*     0    20 */

/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};

Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: remove the struct packet_type argument from dsa_device_ops::rcv()

No tagging driver uses this.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: hci: pass callback data param as pointer in nci_request()

The nci_request() receives a callback function and unsigned long data
argument "opt" which is passed to the callback.  Almost all of the
nci_request() callers pass pointer to a stack variable as data argument.
Only few pass scalar value (e.g. u8).

All such callbacks do not modify passed data argument and in previous
commit they were made as const.  However passing pointers via unsigned
long removes the const annotation.  The callback could simply cast
unsigned long to a pointer to writeable memory.

Use "const void *" as type of this "opt" argument to solve this and
prevent modifying the pointed contents.  This is also consistent with
generic pattern of passing data arguments - via "void *".  In few places
which pass scalar values, use casts via "unsigned long" to suppress any
warnings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cavium: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below. It has been
hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: drop paranoid checks in .get_tag_protocol()

It is desirable to reduce the surface of DSA_TAG_PROTO_NONE as much as
we can, because we now have options for switches without hardware
support for DSA tagging, and the occurrence in the mt7530 driver is in
fact quite gratuitout and easy to remove. Since ds->ops->get_tag_protocol()
is only called for CPU ports, the checks for a CPU port in
mtk_get_tag_protocol() are redundant and can be removed.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'octeon-drr-config'

Sunil Goutham says:

====================
cn10k: DWRR MTU and weights configuration

On OcteonTx2 DWRR quantum is directly configured into each of
the transmit scheduler queues. And PF/VF drivers were free to
config any value upto 2^24.

On CN10K, HW is modified, the quantum configuration at scheduler
queues is in terms of weight. And SW needs to setup a base DWRR MTU
at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do
'DWRR MTU * weight' to get the quantum.

This patch series addresses this HW change on CN10K silicons,
both admin function and PF/VF drivers are modified.

Also added support to program DWRR MTU via devlink params.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: cn10k: Config DWRR weight based on MTU

Program SQ, MDQ, TL4 to TL2 transmit scheduler queues' DWRR
weight based on DWRR MTU programmed at NIX_AF_DWRR_RPM_MTU.
The DWRR MTU from admin function is retrieved via mbox.

On OcteaonTx2 silicon, admin function driver responds with DWRR
MTU as '1'. This helps to avoid silicon specific transmit
scheduler DWRR quantum/weight configuration logic.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: cn10k: DWRR MTU configuration

On OcteonTx2 DWRR quantum is directly configured into each of
the transmit scheduler queues. And PF/VF drivers were free to
config any value upto 2^24.

On CN10K, HW is modified, the quantum configuration at scheduler
queues is in terms of weight. And SW needs to setup a base DWRR MTU
at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do
'DWRR MTU * weight' to get the quantum. For LBK traffic, value
programmed into NIX_AF_DWRR_RPM_MTU register is considered as
DWRR MTU.

This patch programs a default DWRR MTU of 8192 into HW and also
provides a way to change this via devlink params.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: remove min gso test in packet_snd

This patch removed the 'raw gso min size - 1' test which
always fails now:
./in_netns.sh ./psock_snd -v -c -g -l "${mss}"
  raw gso min size - 1 (expected to fail)
  tx: 1524
  rx: 1472
  OK

After commit 7c6d2ecbda83 ("net: be more gentle about silly
gso requests coming from user"), we relaxed the min gso_size
check in virtio_net_hdr_to_skb().
So when a packet which is smaller then the gso_size,
GSO for this packet will not be set, the packet will be
send/recv successfully.

Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: 3ad: fix the concurrency between __bond_release_one() and bond_3ad_state_machine_handler()

Some time ago, I reported a calltrace issue
"did not find a suitable aggregator", please see[1].
After a period of analysis and reproduction, I find
that this problem is caused by concurrency.

Before the problem occurs, the bond structure is like follows:

bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1
                      \
                        port0
      \
        slaver1(eth1) - agg1.lag_ports -> NULL
                      \
                        port1

If we run 'ifenslave bond0 -d eth1', the process is like below:

excuting __bond_release_one()
|
bond_upper_dev_unlink()[step1]
|                       |                       |
|                       |                       bond_3ad_lacpdu_recv()
|                       |                       ->bond_3ad_rx_indication()
|                       |                       spin_lock_bh()
|                       |                       ->ad_rx_machine()
|                       |                       ->__record_pdu()[step2]
|                       |                       spin_unlock_bh()
|                       |                       |
|                       bond_3ad_state_machine_handler()
|                       spin_lock_bh()
|                       ->ad_port_selection_logic()
|                       ->try to find free aggregator[step3]
|                       ->try to find suitable aggregator[step4]
|                       ->did not find a suitable aggregator[step5]
|                       spin_unlock_bh()
|                       |
|                       |
bond_3ad_unbind_slave() |
spin_lock_bh()
spin_unlock_bh()

step1: already removed slaver1(eth1) from list, but port1 remains
step2: receive a lacpdu and update port0
step3: port0 will be removed from agg0.lag_ports. The struct is
       "agg0.lag_ports -> port1" now, and agg0 is not free. At the
   same time, slaver1/agg1 has been removed from the list by step1.
   So we can't find a free aggregator now.
step4: can't find suitable aggregator because of step2
step5: cause a calltrace since port->aggregator is NULL

To solve this concurrency problem, put bond_upper_dev_unlink()
after bond_3ad_unbind_slave(). In this way, we can invalid the port
first and skip this port in bond_3ad_state_machine_handler(). This
eliminates the situation that the slaver has been removed from the
list but the port is still valid.

[1]https://lore.kernel.org/netdev/10374.1611947473@famine/

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: refactor TC action init API

TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().

This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:

TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.

TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.

TCA_ACT_FLAGS_REPLACE replaces 'ovr' in most contexts,
means we are replacing an existing action.

TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.

The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.

I have tested this patch with tdc and I do not see any
failure related to this patch.

Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

niu: read property length only if we use it

In three places, the driver calls of_get_property and reads the property
length although the length is not used. Update the calls to not request
the length.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge https://git./linux/kernel/git/bpf/bpf-next

Andrii Nakryiko says:

====================
bpf-next 2021-07-30

We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).

The main changes are:

1) BTF-guided binary data dumping libbpf API, from Alan.

2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.

3) Ambient BPF run context and cgroup storage cleanup, from Andrii.

4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.

5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.

6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.

7) BPF map pinning improvements in libbpf, from Martynas.

8) Improved module BTF support in libbpf and bpftool, from Quentin.

9) Bpftool cleanups and documentation improvements, from Quentin.

10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.

11) Increased maximum cgroup storage size, from Stanislav.

12) Small fixes and improvements to BPF tests and samples, from various folks.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
  tools: bpftool: Complete metrics list in "bpftool prog profile" doc
  tools: bpftool: Document and add bash completion for -L, -B options
  selftests/bpf: Update bpftool's consistency script for checking options
  tools: bpftool: Update and synchronise option list in doc and help msg
  tools: bpftool: Complete and synchronise attach or map types
  selftests/bpf: Check consistency between bpftool source, doc, completion
  tools: bpftool: Slightly ease bash completion updates
  unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
  libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
  tools: bpftool: Support dumping split BTF by id
  libbpf: Add split BTF support for btf__load_from_kernel_by_id()
  tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
  tools: Free BTF objects at various locations
  libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
  libbpf: Rename btf__load() as btf__load_into_kernel()
  libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
  bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
  tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
  bpf: Increase supported cgroup storage value size
  libbpf: Fix race when pinning maps in parallel
  ...
====================

Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Conflicting commits, all resolutions pretty trivial:

drivers/bus/mhi/pci_generic.c
  5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
  56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

drivers/nfc/s3fwrn5/firmware.c
  a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label")
  46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
  801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")

MAINTAINERS
  7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
  8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-5.14-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...

Merge tag 'acpi-5.14-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007

pipe: make pipe writes always wake up readers

Since commit 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
"The commit 1b6b26ae7053 ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a66419 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/
Link: https://github.com/realm/realm-core
Link: https://github.com/realm/realm-core/issues/4666
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/
Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'tools: bpftool: update, synchronise and validate types and options'

Quentin Monnet says:

====================

To work with the different program types, map types, attach types etc.
supported by eBPF, bpftool needs occasional updates to learn about the new
features supported by the kernel. When such types translate into new
keyword for the command line, updates are expected in several locations:
typically, the help message displayed from bpftool itself, the manual page,
and the bash completion file should be updated. The options used by the
different commands for bpftool should also remain synchronised at those
locations.

Several omissions have occurred in the past, and a number of types are
still missing today. This set is an attempt to improve the situation. It
brings up-to-date the lists of types or options in bpftool, and also adds a
Python script to the BPF selftests to automatically check that most of
these lists remain synchronised.

v2:
- Reformat some lines in the bash completion file.
- Do not reformat attach types, to preserve git-blame history.
- Do not call Python script from tools/testing/selftests/bpf/Makefile.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

tools: bpftool: Complete metrics list in "bpftool prog profile" doc

Profiling programs with bpftool was extended some time ago to support
two new metrics, namely itlb_misses and dtlb_misses (misses for the
instruction/data translation lookaside buffer). Update the manual page
and bash completion accordingly.

Fixes: 450d060e8f75 ("bpftool: Add {i,d}tlb_misses support for bpftool profile")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-8-quentin@isovalent.com

tools: bpftool: Document and add bash completion for -L, -B options

The -L|--use-loader option for using loader programs when loading, or
when generating a skeleton, did not have any documentation or bash
completion. Same thing goes for -B|--base-btf, used to pass a path to a
base BTF object for split BTF such as BTF for kernel modules.

This patch documents and adds bash completion for those options.

Fixes: 75fa1777694c ("tools/bpftool: Add bpftool support for split BTF")
Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-7-quentin@isovalent.com

selftests/bpf: Update bpftool's consistency script for checking options

Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-6-quentin@isovalent.com

tools: bpftool: Update and synchronise option list in doc and help msg

All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.

The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.

Let's update the lists:

- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
  and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
  complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
  formatting for the other man pages. This is for consistency, and also
  because it will be helpful in a future patch to automatically check
  that the files are synchronised.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com

tools: bpftool: Complete and synchronise attach or map types

Update bpftool's list of attach type names to tell it about the latest
attach types, or the "ringbuf" map. Also update the documentation, help
messages, and bash completion when relevant.

These missing items were reported by the newly added Python script used
to help maintain consistency in bpftool.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-4-quentin@isovalent.com

selftests/bpf: Check consistency between bpftool source, doc, completion

Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.

In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:

- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.

This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.

The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:

  $ ./test_bpftool_synctypes.py
  Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
  Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}

Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.

The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-3-quentin@isovalent.com

tools: bpftool: Slightly ease bash completion updates

Bash completion for bpftool gets two minor improvements in this patch.

Move the detection of attach types for "bpftool cgroup attach" outside
of the "case/esac" bloc, where we cannot reuse our variable holding the
list of supported attach types as a pattern list. After the change, we
have only one list of cgroup attach types to update when new types are
added, instead of the former two lists.

Also rename the variables holding lists of names for program types, map
types, and attach types, to make them more unique. This can make it
slightly easier to point people to the relevant variables to update, but
the main objective here is to help run a script to check that bash
completion is up-to-date with bpftool's source code.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-2-quentin@isovalent.com

Merge branch 'clean-devlink-net-namespace-operations'

Leon Romanovsky says:

====================
Clean devlink net namespace operations

This short series continues my work on devlink core code to make devlink
reload less prone to errors and harden it from API abuse.

Despite first patch being a clear fix, I would ask you to apply it to
net-next anyway, because the fixed patch is anyway old and it will
help us to eliminate merge conflicts that will arise for following
patches or even for the second one.
====================

Link: https://lore.kernel.org/r/cover.1627578998.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Allocate devlink directly in requested net namespace

There is no need in extra call indirection and check from impossible
flow where someone tries to set namespace without prior call
to devlink_alloc().

Instead of this extra logic and additional EXPORT_SYMBOL, use specialized
devlink allocation function that receives net namespace as an argument.

Such specialized API allows clear view when devlink initialized in wrong
net namespace and/or kernel users don't try to change devlink namespace
under the hood.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Break parameter notification sequence to be before/after unload/load driver

The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.

* ip netns add n1
* devlink dev reload pci/0000:00:09.0 netns n1

==================================================================
BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
Read of size 4 at addr ffff888009d04308 by task devlink/275

CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
  dump_stack+0x93/0xc2
  print_address_description.constprop.0+0x18/0x140
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  kasan_report.cold+0x7c/0xd8
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  devlink_nl_param_fill+0x1c8/0xe80
  ? __free_pages_ok+0x37a/0x8a0
  ? devlink_flash_update_timeout_notify+0xd0/0xd0
  ? lock_acquire+0x1a9/0x6d0
  ? fs_reclaim_acquire+0xb7/0x160
  ? lock_is_held_type+0x98/0x110
  ? 0xffffffff81000000
  ? lock_release+0x1f9/0x6c0
  ? fs_reclaim_release+0xa1/0xf0
  ? lock_downgrade+0x6d0/0x6d0
  ? lock_is_held_type+0x98/0x110
  ? lock_is_held_type+0x98/0x110
  ? memset+0x20/0x40
  ? __build_skb_around+0x1f8/0x2b0
  devlink_param_notify+0x6d/0x180
  devlink_reload+0x1c3/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_get_from_attrs+0x1bc/0x260
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? lock_is_held_type+0x98/0x110
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? do_sys_openat2+0x10b/0x370
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  ? __x64_sys_openat+0x120/0x1d0
  ? __x64_sys_open+0x1a0/0x1a0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc69d0af14a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 146:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x99/0xc0
  mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
  mlx5_load+0xd2/0x180 [mlx5_core]
  mlx5_init_one+0x2f6/0x450 [mlx5_core]
  probe_one+0x47d/0x6e0 [mlx5_core]
  pci_device_probe+0x2a0/0x4a0
  really_probe+0x20a/0xc90
  driver_probe_device+0xd8/0x380
  device_driver_attach+0x1df/0x250
  __driver_attach+0xff/0x240
  bus_for_each_dev+0x11e/0x1a0
  bus_add_driver+0x309/0x570
  driver_register+0x1ee/0x380
  0xffffffffa06b8062
  do_one_initcall+0xd5/0x410
  do_init_module+0x1c8/0x760
  load_module+0x6d8b/0x9650
  __do_sys_finit_module+0x118/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 275:
  kasan_save_stack+0x1b/0x40
  kasan_set_track+0x1c/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0x102/0x140
  slab_free_freelist_hook+0x74/0x1b0
  kfree+0xd7/0x2a0
  mlx5_unload+0x16/0xb0 [mlx5_core]
  mlx5_unload_one+0xae/0x120 [mlx5_core]
  mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
  devlink_reload+0x141/0x520
  devlink_nl_cmd_reload+0x66d/0x1070
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  genl_rcv_msg+0x27f/0x4a0
  netlink_rcv_skb+0x11d/0x340
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff888009d04300
  which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
  128-byte region [ffff888009d04300, ffff888009d04380)
The buggy address belongs to the page:
page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
head:0000000086a64ecc order:1 compound_mapcount:0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.

Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()

As Eric noticed, __unix_dgram_recvmsg() may acquire u->iolock
too, so we have to release it before calling this function.

Fixes: 9825d866ce0d ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>

libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf

Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).

[0] Closes: https://github.com/libbpf/libbpf/issues/280

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730114012.494408-1-hengqi.chen@gmail.com

sk_buff: avoid potentially clearing 'slow_gro' field

If skb_dst_set_noref() is invoked with a NULL dst, the 'slow_gro'
field is cleared, too. That could lead to wrong behavior if
the skb later enters the GRO stage.

Fix the potential issue replacing preserving a non-zero value of
the 'slow_gro' field.

Additionally, fix a comment typo.

Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 8a886b142bd0 ("sk_buff: track dst status in slow_gro")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/aa42529252dc8bb02bd42e8629427040d1058537.1627662501.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branches 'acpi-resources' and 'acpi-dptf'

* acpi-resources:
Revert "ACPI: resources: Add checks for ACPI IRQ override"

* acpi-dptf:
ACPI: DPTF: Fix reading of attributes

Merge tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- gendisk freeing fix (Christoph)

- blk-iocost wake ordering fix (Tejun)

- tag allocation error handling fix (John)

- loop locking fix. While this isn't the prettiest fix in the world,
   nobody has any good alternatives for 5.14. Something to likely
   revisit for 5.15. (Tetsuo)

* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  block: delay freeing the gendisk
  blk-iocost: fix operation ordering in iocg_wake_fn()
  blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
  loop: reintroduce global lock for safe loop_validate_file() traversal

Merge tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- A fix for block backed reissue (me)

- Reissue context hardening (me)

- Async link locking fix (Pavel)

* tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  io_uring: fix poll requests leaking second poll entries
  io_uring: don't block level reissue off completion path
  io_uring: always reissue from task_work context
  io_uring: fix race in unified task_work running
  io_uring: fix io_prep_async_link locking

Merge tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block

Pull libata fixlets from Jens Axboe:

- A fix for PIO highmem (Christoph)

- Kill HAVE_IDE as it's now unused (Lukas)

* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
arch: Kconfig: clean up obsolete use of HAVE_IDE
libata: fix ata_pio_sector for CONFIG_HIGHMEM

Merge tag 'for-5.14-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fix -Warray-bounds warning, to help external patchset to make it
   default treewide

- fix writeable device accounting (syzbot report)

- fix fsync and log replay after a rename and inode eviction

- fix potentially lost error code when submitting multiple bios for
   compressed range

* tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: calculate number of eb pages properly in csum_tree_block
  btrfs: fix rw device counting in __btrfs_free_extra_devids
  btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
  btrfs: mark compressed range uptodate only if all bio succeed

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- resume timing fix for intel-ish driver (Ye Xiang)

- fix for using incorrect MMIO register in amd_sfh driver (Dylan
   MacKenzie)

- Cintiq 24HDT / 27QHDT regression fix and touch processing fix for
   Wacom driver (Jason Gerecke)

- device removal bugfix for ft260 driver (Michael Zaidman)

- other small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: ft260: fix device removal due to USB disconnect
  HID: wacom: Skip processing of touches with negative slot values
  HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT
  HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"
  HID: apple: Add support for Keychron K1 wireless keyboard
  HID: fix typo in Kconfig
  HID: ft260: fix format type warning in ft260_word_show()
  HID: amd_sfh: Use correct MMIO register for DMA address
  HID: asus: Remove check for same LED brightness on set
  HID: intel-ish-hid: use async resume function

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"7 patches.

  Subsystems affected by this patch series: lib, ocfs2, and mm (slub,
  migration, and memcg)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
  slub: fix unreclaimable slab stat for bulk free
  mm/migrate: fix NR_ISOLATED corruption on 64-bit
  mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
  ocfs2: issue zeroout to EOF blocks
  ocfs2: fix zero out valid data
  lib/test_string.c: move string selftest in the Runtime Testing menu

Merge tag 'linux-can-fixes-for-5.14-20210730' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-07-30

The first patch is by me and adds Yasushi SHOJI as a reviewer for the
Microchip CAN BUS Analyzer Tool driver.

Dan Carpenter's patch fixes a signedness bug in the hi311x driver.

Pavel Skripkin provides 4 patches, the first targets the mcba_usb
driver by adding the missing urb->transfer_dma initialization, which
was broken in a previous commit. The last 3 patches fix a memory leak
in the usb_8dev, ems_usb and esd_usb2 driver.

* tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
====================

Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()

When I use kfree_rcu() to free a large memory allocated by kmalloc_node(),
the following dump occurs.

  BUG: kernel NULL pointer dereference, address: 0000000000000020
  [...]
  Oops: 0000 [#1] SMP
  [...]
  Workqueue: events kfree_rcu_work
  RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline]
  RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline]
  RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363
  [...]
  Call Trace:
    kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293
    kfree_bulk include/linux/slab.h:413 [inline]
    kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300
    process_one_work+0x207/0x530 kernel/workqueue.c:2276
    worker_thread+0x320/0x610 kernel/workqueue.c:2422
    kthread+0x13d/0x160 kernel/kthread.c:313
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

When kmalloc_node() a large memory, page is allocated, not slab, so when
freeing memory via kfree_rcu(), this large memory should not be used by
memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for
slab.

Using page_objcgs_check() instead of page_objcgs() in
memcg_slab_free_hook() to fix this bug.

Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com
Fixes: 270c6a71460e ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: fix unreclaimable slab stat for bulk free

SLUB uses page allocator for higher order allocations and update
unreclaimable slab stat for such allocations.  At the moment, the bulk
free for SLUB does not share code with normal free code path for these
type of allocations and have missed the stat update.  So, fix the stat
update by common code.  The user visible impact of the bug is the
potential of inconsistent unreclaimable slab stat visible through
meminfo and vmstat.

Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com
Fixes: 6a486c0ad4dc ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: fix NR_ISOLATED corruption on 64-bit

Similar to commit 2da9f6305f30 ("mm/vmscan: fix NR_ISOLATED_FILE
corruption on 64-bit") avoid using unsigned int for nr_pages. With
unsigned int type the large unsigned int converts to a large positive
signed long.

Symptoms include CMA allocations hanging forever due to
alloc_contig_range->...->isolate_migratepages_block waiting forever in
"while (unlikely(too_many_isolated(pgdat)))".

Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com
Fixes: c5fc5c3ae0c8 ("mm: migrate: account THP NUMA migration counters correctly")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code

Dan Carpenter reports:

    The patch 2d146aa3aa84: "mm: memcontrol: switch to rstat" from Apr
    29, 2021, leads to the following static checker warning:

    kernel/cgroup/rstat.c:200 cgroup_rstat_flush()
    warn: sleeping in atomic context

    mm/memcontrol.c
      3572  static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
      3573  {
      3574          unsigned long val;
      3575
      3576          if (mem_cgroup_is_root(memcg)) {
      3577                  cgroup_rstat_flush(memcg->css.cgroup);
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    This is from static analysis and potentially a false positive.  The
    problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold()
    which holds an rcu_read_lock().  And the cgroup_rstat_flush() function
    can sleep.

      3578                  val = memcg_page_state(memcg, NR_FILE_PAGES) +
      3579                          memcg_page_state(memcg, NR_ANON_MAPPED);
      3580                  if (swap)
      3581                          val += memcg_page_state(memcg, MEMCG_SWAP);
      3582          } else {
      3583                  if (!swap)
      3584                          val = page_counter_read(&memcg->memory);
      3585                  else
      3586                          val = page_counter_read(&memcg->memsw);
      3587          }
      3588          return val;
      3589  }

__mem_cgroup_threshold() indeed holds the rcu lock.  In addition, the
thresholding code is invoked during stat changes, and those contexts
have irqs disabled as well.  If the lock breaking occurs inside the
flush function, it will result in a sleep from an atomic context.

Use the irqsafe flushing variant in mem_cgroup_usage() to fix this.

Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org
Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: issue zeroout to EOF blocks

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix zero out valid data

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471f0cc ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_string.c: move string selftest in the Runtime Testing menu

STRING_SELFTEST is presented in the "Library routines" menu.  Move it in
Kernel hacking > Kernel Testing and Coverage > Runtime Testing together
with other similar tests found in lib/

--- Runtime Testing
<*>   Test functions located in the hexdump module at runtime
<*>   Test string functions (NEW)
<*>   Test functions located in the string_helpers module at runtime
<*>   Test strscpy*() family of functions at runtime
<*>   Test kstrto*() family of functions at runtime
<*>   Test printf() family of functions at runtime
<*>   Test scanf() family of functions at runtime

Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gve: Update MAINTAINERS list

The team maintaining the gve driver has undergone some changes,
this updates the MAINTAINERS file accordingly.

Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: netlink: Remove unused function

lockdep_genl_is_held() and its caller arm not used now, just remove them.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210729074854.8968-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'nfc-constify-pointed-data-missed-part'

Krzysztof Kozlowski says:

====================
nfc: constify pointed data - missed part

This was previously sent [1] but got lost. It was a prerequisite to part two of NFC const [2].

Changes since v2:
1. Drop patch previously 7/8 which cases new warnings "warning: Using
plain integer as NULL pointer".

Changes since v1:
1. Add patch 1/8 fixing up nfcmrvl_spi_parse_dt()

[1] https://lore.kernel.org/lkml/20210726145224.146006-1-krzysztof.kozlowski@canonical.com/
[2] https://lore.kernel.org/linux-nfc/20210729104022.47761-1-krzysztof.kozlowski@canonical.com/T/#m199fbdde180fa005a10addf28479fcbdc6263eab
====================

Link: https://lore.kernel.org/r/20210730144202.255890-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: hci: cleanup unneeded spaces

No need for multiple spaces in variable declaration (the code does not
use them in other places). No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: nci: constify several pointers to u8, sk_buff and other structs

Several functions receive pointers to u8, sk_buff or other structs but
do not modify the contents so make them const.  This allows doing the
same for local variables and in total makes the code a little bit safer.

This makes const also data passed as "unsigned long opt" argument to
nci_request() function.  Usual flow for such functions is:
1. Receive "u8 *" and store it (the pointer) in a structure
   allocated on stack (e.g. struct nci_set_config_param),
2. Call nci_request() or __nci_request() passing a callback function an
   the pointer to the structure via an "unsigned long opt",
3. nci_request() calls the callback which dereferences "unsigned long
   opt" in a read-only way.

This converts all above paths to use proper pointer to const data, so
entire flow is safer.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: constify local pointer variables

Few pointers to struct nfc_target and struct nfc_se can be made const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: constify several pointers to u8, char and sk_buff

Several functions receive pointers to u8, char or sk_buff but do not
modify the contents so make them const. This allows doing the same for
local variables and in total makes the code a little bit safer.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: hci: annotate nfc_llc_init() as __init

The nfc_llc_init() is used only in other __init annotated context.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: annotate af_nfc_exit() as __exit

The af_nfc_exit() is used only in other __exit annotated context
(nfc_exit()).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: correct nfcmrvl_spi_parse_dt() device_node argument

The device_node in nfcmrvl_spi_parse_dt() cannot be const as it is
passed to OF functions which modify it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

arch: Kconfig: clean up obsolete use of HAVE_IDE

The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.

As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3ac63
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.

The issue was identified with ./scripts/checkkconfigsymbols.py.

Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net: convert fib_treeref from int to refcount_t

refcount_t type should be used instead of int when fib_treeref is used as
a reference counter,and avoid use-after-free risks.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210729071350.28919-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

can: esd_usb2: fix memory leak

In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
with coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: ems_usb: fix memory leak

In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see ems_usb_start) and this flag cannot be used with
coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb_8dev: fix memory leak

In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see usb_8dev_start) and this flag cannot be used with
coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcba_usb_start(): add missing urb->transfer_dma initialization

Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit 91c02557174b ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.

In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().

All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.

| DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set

Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: hi311x: fix a signedness bug in hi3110_cmd()

The hi3110_cmd() is supposed to return zero on success and negative
error codes on failure, but it was accidentally declared as a u8 when
it needs to be an int type.

Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/r/20210729141246.GA1267@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver

This patch adds Yasushi SHOJI as a reviewer for the Microchip CAN BUS
Analyzer Tool driver.

Link: https://lore.kernel.org/r/20210726111619.1023991-1-mkl@pengutronix.de
Acked-by: Yasushi SHOJI <yashi@spacecubics.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, seems about the right size, lots of small
  fixes across the board, mostly amdgpu, but msm and i915 are in there
  along with panel and ttm.

  amdgpu:
   - Fix resource leak in an error path
   - Avoid stack contents exposure in error path
   - pmops check fix for S0ix vs S3
   - DCN 2.1 display fixes
   - DCN 2.0 display fix
   - Backlight control fix for laptops with HDR panels
   - Maintainers updates

  i915:
   - Fix vbt port mask
   - Fix around reading the right DSC disable fuse in display_ver 10
   - Split display version 9 and 10 in intel_setup_outputs

  msm:
   - iommu fault display fix
   - misc dp compliance fixes
   - dpu reg sizing fix

  panel:
   - Fix bpc for ytc700tlag_05_201c

  ttm:
   - debugfs init fixes"

* tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm:
  maintainers: add bugs and chat URLs for amdgpu
  drm/amdgpu/display: only enable aux backlight control for OLED panels
  drm/amd/display: ensure dentist display clock update finished in DCN20
  drm/amd/display: Add missing DCN21 IP parameter
  drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21
  drm/amdgpu: Check pmops for desired suspend state
  drm/msm/dp: Initialize dp->aux->drm_dev before registration
  drm/msm/dp: signal audio plugged change at dp_pm_resume
  drm/msm/dp: Initialize the INTF_CONFIG register
  drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
  drm/msm: Fix display fault handling
  drm/msm/dpu: Fix sm8250_mdp register length
  drm/amdgpu: Avoid printing of stack contents on firmware load error
  drm/amdgpu: Fix resource leak on probe error path
  drm/i915/display: split DISPLAY_VER 9 and 10 in intel_setup_outputs()
  drm/i915: fix not reading DSC disable fuse in GLK
  drm/i915/bios: Fix ports mask
  drm/panel: panel-simple: Fix proper bpc for ytc700tlag_05_201c
  drm/ttm: Initialize debugfs from ttm_global_init()

Merge tag 'fallthrough-fixes-clang-5.14-rc4' of git://git./linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo Silva:
"Fix some fall-through warnings when building with Clang and
  '-Wimplicit-fallthrough' on ARM"

* tag 'fallthrough-fixes-clang-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  scsi: fas216: Fix fall-through warning for Clang
  scsi: acornscsi: Fix fall-through warning for clang
  ARM: riscpc: Fix fall-through warning for Clang

Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha

Pull alpha updates from Matt Turner:
"They're mostly small janitorial fixes but there's also more important
  ones:

   - drop the alpha-specific x86 binary loader (David Hildenbrand)

   - regression fix for at least Marvel platforms (Mike Rapoport)

   - fix for a scary-looking typo (Zheng Yongjun)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: register early reserved memory in memblock
  alpha: fix spelling mistakes
  alpha: Remove space between * and parameter name
  alpha: fp_emul: avoid init/cleanup_module names
  alpha: Add syscall_get_return_value()
  binfmt: remove support for em86 (alpha only)
  alpha: fix typos in a comment
  alpha: defconfig: add necessary configs for boot testing
  alpha: Send stop IPI to send to online CPUs
  alpha: convert comma to semicolon
  alpha: remove undef inline in compiler.h
  alpha: Kconfig: Replace HTTP links with HTTPS ones
  alpha: __udiv_qrnnd should be exported

Merge branch 'libbpf: rename btf__get_from_id() and btf__load() APIs, support split BTF'

Quentin Monnet says:

====================

As part of the effort to move towards a v1.0 for libbpf [0], this set
improves some confusing function names related to BTF loading from and to
the kernel:

- btf__load() becomes btf__load_into_kernel().
- btf__get_from_id becomes btf__load_from_kernel_by_id().
- A new version btf__load_from_kernel_by_id_split() extends the former to
  add support for split BTF.

The last patch is a trivial change to bpftool to add support for dumping
split BTF objects by referencing them by their id (and not only by their
BTF path).

[0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis

v3:
- Use libbpf_err_ptr() in btf__load_from_kernel_by_id(), ERR_PTR() in
  bpftool's get_map_kv_btf().
- Move the definition of btf__load_from_kernel_by_id() closer to the
  btf__parse() group in btf.h (move the legacy function with it).
- Fix a bug on the return value in libbpf_find_prog_btf_id(), as a new
  patch.
- Move the btf__free() fixes to their own patch.
- Add "Fixes:" tags to relevant patches.

v2:
- Remove deprecation marking of legacy functions (patch 4/6 from v1).
- Make btf__load_from_kernel_by_id{,_split}() return the btf struct, adjust
  surrounding code and call btf__free() when missing.
- Add new functions to v0.5.0 API (and not v0.6.0).
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

tools: bpftool: Support dumping split BTF by id

Split BTF objects are typically BTF objects for kernel modules, which
are incrementally built on top of kernel BTF instead of redefining all
kernel symbols they need. We can use bpftool with its -B command-line
option to dump split BTF objects. It works well when the handle provided
for the BTF object to dump is a "path" to the BTF object, typically
under /sys/kernel/btf, because bpftool internally calls
btf__parse_split() which can take a "base_btf" pointer and resolve the
BTF reconstruction (although in that case, the "-B" option is
unnecessary because bpftool performs autodetection).

However, it did not work so far when passing the BTF object through its
id, because bpftool would call btf__get_from_id() which did not provide
a way to pass a "base_btf" pointer.

In other words, the following works:

# bpftool btf dump file /sys/kernel/btf/i2c_smbus -B /sys/kernel/btf/vmlinux

But this was not possible:

# bpftool btf dump id 6 -B /sys/kernel/btf/vmlinux

The libbpf API has recently changed, and btf__get_from_id() has been
deprecated in favour of btf__load_from_kernel_by_id() and its version
with support for split BTF, btf__load_from_kernel_by_id_split(). Let's
update bpftool to make it able to dump the BTF object in the second case
as well.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-9-quentin@isovalent.com

libbpf: Add split BTF support for btf__load_from_kernel_by_id()

Add a new API function btf__load_from_kernel_by_id_split(), which takes
a pointer to a base BTF object in order to support split BTF objects
when retrieving BTF information from the kernel.

Reference: https://github.com/libbpf/libbpf/issues/314

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-8-quentin@isovalent.com

tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()

Replace the calls to function btf__get_from_id(), which we plan to
deprecate before the library reaches v1.0, with calls to
btf__load_from_kernel_by_id() in tools/ (bpftool, perf, selftests).
Update the surrounding code accordingly (instead of passing a pointer to
the btf struct, get it as a return value from the function).

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-6-quentin@isovalent.com

tools: Free BTF objects at various locations

Make sure to call btf__free() (and not simply free(), which does not
free all pointers stored in the struct) on pointers to struct btf
objects retrieved at various locations.

These were found while updating the calls to btf__get_from_id().

Fixes: 999d82cbc044 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 254471e57a86 ("tools/bpf: bpftool: add support for func types")
Fixes: 7b612e291a5a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Fixes: d56354dc4909 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Fixes: fa853c4b839e ("perf stat: Enable counting events for BPF programs")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210729162028.29512-5-quentin@isovalent.com

libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()

Rename function btf__get_from_id() as btf__load_from_kernel_by_id() to
better indicate what the function does. Change the new function so that,
instead of requiring a pointer to the pointer to update and returning
with an error code, it takes a single argument (the id of the BTF
object) and returns the corresponding pointer. This is more in line with
the existing constructors.

The other tools calling the (soon-to-be) deprecated btf__get_from_id()
function will be updated in a future commit.

References:

- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-4-quentin@isovalent.com

libbpf: Rename btf__load() as btf__load_into_kernel()

As part of the effort to move towards a v1.0 for libbpf, rename
btf__load() function, used to "upload" BTF information into the kernel,
as btf__load_into_kernel(). This new name better reflects what the
function does.

References:

- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-3-quentin@isovalent.com

libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()

Variable "err" is initialised to -EINVAL so that this error code is
returned when something goes wrong in libbpf_find_prog_btf_id().
However, a recent change in the function made use of the variable in
such a way that it is set to 0 if retrieving linear information on the
program is successful, and this 0 value remains if we error out on
failures at later stages.

Let's fix this by setting err to -EINVAL later in the function.

Fixes: e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210729162028.29512-2-quentin@isovalent.com

bpf: Emit better log message if bpf_iter ctx arg btf_id == 0

To avoid kernel build failure due to some missing .BTF-ids referenced
functions/types, the patch ([1]) tries to fill btf_id 0 for
these types.

In bpf verifier, for percpu variable and helper returning btf_id cases,
verifier already emitted proper warning with something like
  verbose(env, "Helper has invalid btf_id in R%d\n", regno);
  verbose(env, "invalid return type %d of func %s#%d\n",
          fn->ret_type, func_id_name(func_id), func_id);

But this is not the case for bpf_iter context arguments.
I hacked resolve_btfids to encode btf_id 0 for struct task_struct.
With `./test_progs -n 7/5`, I got,
  0: (79) r2 = *(u64 *)(r1 +0)
  func 'bpf_iter_task' arg0 has btf_id 29739 type STRUCT 'bpf_iter_meta'
  ; struct seq_file *seq = ctx->meta->seq;
  1: (79) r6 = *(u64 *)(r2 +0)
  ; struct task_struct *task = ctx->task;
  2: (79) r7 = *(u64 *)(r1 +8)
  ; if (task == (void *)0) {
  3: (55) if r7 != 0x0 goto pc+11
  ...
  ; BPF_SEQ_PRINTF(seq, "%8d %8d\n", task->tgid, task->pid);
  26: (61) r1 = *(u32 *)(r7 +1372)
  Type '(anon)' is not a struct

Basically, verifier will return btf_id 0 for task_struct.
Later on, when the code tries to access task->tgid, the
verifier correctly complains the type is '(anon)' and it is
not a struct. Users still need to backtrace to find out
what is going on.

Let us catch the invalid btf_id 0 earlier
and provide better message indicating btf_id is wrong.
The new error message looks like below:
  R1 type=ctx expected=fp
  ; struct seq_file *seq = ctx->meta->seq;
  0: (79) r2 = *(u64 *)(r1 +0)
  func 'bpf_iter_task' arg0 has btf_id 29739 type STRUCT 'bpf_iter_meta'
  ; struct seq_file *seq = ctx->meta->seq;
  1: (79) r6 = *(u64 *)(r2 +0)
  ; struct task_struct *task = ctx->task;
  2: (79) r7 = *(u64 *)(r1 +8)
  invalid btf_id for context argument offset 8
  invalid bpf_context access off=8 size=8

[1] https://lore.kernel.org/bpf/20210727132532.2473636-1-hengqi.chen@gmail.com/

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210728183025.1461750-1-yhs@fb.com

tools/resolve_btfids: Emit warnings and patch zero id for missing symbols

Kernel functions referenced by .BTF_ids may be changed from global to static
and get inlined or get renamed/removed, and thus disappears from BTF.
This causes kernel build failure when resolve_btfids do id patch for symbols
in .BTF_ids in vmlinux. Update resolve_btfids to emit warning messages and
patch zero id for missing symbols instead of aborting kernel build process.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210727132532.2473636-2-hengqi.chen@gmail.com

bcm63xx_enet: delete a redundant assignment

In the function bcm_enetsw_probe(), 'ret' will be assigned by
bcm_enet_change_mtu(), so 'ret = 0' make no sense.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge

DSA has gained the recent ability to deal gracefully with upper
interfaces it cannot offload, such as the bridge, bonding or team
drivers. When such uppers exist, the ports are still in standalone mode
as far as the hardware is concerned.

But when we deliver packets to the software bridge in order for that to
do the forwarding, there is an unpleasant surprise in that the bridge
will refuse to forward them. This is because we unconditionally set
skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
were already forwarded in hardware by us.

Since dp->bridge_dev is populated only when there is hardware offload
for it, but not in the software fallback case, let's introduce a new
helper that can be called from the tagger data path which sets the
skb->offload_fwd_mark accordingly to zero when there is no hardware
offload for bridging. This lets the bridge forward packets back to other
interfaces of our switch, if needed.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvlan: Add handling of NETDEV_UP events

When an ipvlan device is created on a bond device, the link state
of the ipvlan device may be abnormal. This is because bonding device
allows to add physical network card device in the down state and so
NETDEV_CHANGE event will not be notified to other listeners, so ipvlan
has no chance to update its link status.

The following steps can cause such problems:
1) bond0 is down
2) ip link add link bond0 name ipvlan type ipvlan mode l2
3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves
4) ip link set bond0 up

After these steps, use ip link command, we found ipvlan has NO-CARRIER:
ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...>

We can deal with this problem like VLAN: Add handling of NETDEV_UP
events. If we receive NETDEV_UP event, we will update the link status
of the ipvlan.

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: store the last executed chain also for clsact egress

currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.

Suggested-by: Alaa Hleilel <alaa@nvidia.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dpaa2-switch-add-mirroring-support'

Ioana Ciornei says:

====================
dpaa2-switch: add mirroring support

This patch set adds per port and per VLAN mirroring in dpaa2-switch.

The first 4 patches are just cosmetic changes. We renamed the
dpaa2_switch_acl_tbl structure into dpaa2_switch_filter_block so that we
can reuse it for filters that do not use the ACL table and reorganized
the addition of trap, redirect and drop filters into a separate
function. All this just to make for a more streamlined addition of the
support for mirroring.

The next 4 patches are actually adding the advertised support. Mirroring
rules can be added in shared blocks, the driver will replicate the same
configuration on all the switch ports part of the same block.

The last patch documents the feature, presents its behavior and
limitations and gives a couple of examples.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

docs: networking: dpaa2: document mirroring support on the switch

Document the mirroring capabilities of the dpaa2-switch driver,
any restrictions that are imposed and some example commands.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: offload shared block mirror filters when binding to a port

When mirroring rules are added in shared filter blocks, the same
mirroring rule has to be configured on all the switch ports that are
part of the same block.

In case a switch port joins a shared block after mirroring filters have
been already added to it, then all the mirror rules should be offloaded
to the port. The reverse, removal of mirroring rules, has to be done at
block unbind.

For this purpose, the dpaa2_switch_block_offload_mirror() and
dpaa2_switch_block_unoffload_mirror() functions are added and called
upon binding and unbinding a switch port to/from a block.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: add VLAN based mirroring

Using the infrastructure added in the previous patch, extend tc-flower
support with FLOW_ACTION_MIRRED based on VLAN.

Tested with:

tc qdisc add dev eth8 ingress_block 1 clsact
tc filter add block 1 ingress protocol 802.1q flower skip_sw \
vlan_id 100 action mirred egress mirror dev eth6
tc filter del block 1 ingress pref 49152

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: add support for port mirroring

Add support for per port mirroring for the DPAA2 switch. We support
only single mirror port, therefore we allow mirroring rules only as long
as the destination port is always the same.

Unlike all the actions (drop, redirect, trap) already supported by the
dpaa2-switch driver, adding mirroring filters in shared blocks is not
achieved by a singular ACL entry added in a table shared by the ports.
This is why, when a new mirror filter is added in a block we have to got
through all the switch ports sharing it and configure the filter
individually on all.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: add API for setting up mirroring

Add the necessary MC API for setting up and configuring the mirroring
feature on the DPSW DPAA2 object.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: reorganize dpaa2_switch_cls_matchall_replace

Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_matchall_replace_acl().

This is intended to help with the code readability when the mirroring
support is added.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: reorganize dpaa2_switch_cls_flower_replace

Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_flower_replace_acl().
This is intended to help with the code readability when the mirroring
support is added.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: rename dpaa2_switch_acl_tbl into filter_block

Until now, shared filter blocks were implemented only by ACL tables
shared between ports. Going forward, when the mirroring support will be
added, this will not be true anymore.

Rename the dpaa2_switch_acl_tbl into dpaa2_switch_filter_block so that
we make it clear that the structure is used not only for filters that
use the ACL table but will be used for all the filters that are added in
a block.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-switch: rename dpaa2_switch_tc_parse_action to specify the ACL

Until now, the dpaa2_switch_tc_parse_action() function was used for all
the supported tc actions since all of them were implemented by adding
ACL table entries. In the next commits, the dpaa2-switch driver will
gain mirroring support which is not using the same HW feature.

Make sure that we specify the ACL in the function name so that we make
it clear that it's only used for specific actions.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

scsi: fas216: Fix fall-through warning for Clang

Fix the following fallthrough warning (on ARM):

drivers/scsi/arm/fas216.c:1379:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
           default:
           ^
   drivers/scsi/arm/fas216.c:1379:2: note: insert 'break;' to avoid fall-through
           default:
           ^
           break;

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

scsi: acornscsi: Fix fall-through warning for clang

Fix the following fallthrough warning (on ARM):

drivers/scsi/arm/acornscsi.c:2651:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
           case res_success:
           ^
   drivers/scsi/arm/acornscsi.c:2651:2: note: insert '__attribute__((fallthrough));' to silence this warning
           case res_success:
           ^
           __attribute__((fallthrough));
   drivers/scsi/arm/acornscsi.c:2651:2: note: insert 'break;' to avoid fall-through
           case res_success:
           ^
           break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

ARM: riscpc: Fix fall-through warning for Clang

Fix the following fallthrough warning:

arch/arm/mach-rpc/riscpc.c:52:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
           default:
           ^
arch/arm/mach-rpc/riscpc.c:52:2: note: insert 'break;' to avoid fall-through
           default:
           ^
           break;

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>