selftests: cgroup: update per-memcg zswap writeback selftest

The memcg-zswap self test is updated to adjust to the behavior change
implemented by commit 87730b165089 ("zswap: make shrinking memcg-aware"),
where zswap performs writeback for specific memcg.

Link: https://lkml.kernel.org/r/20231130194023.4102148-6-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: memcg: add per-memcg zswap writeback stat

Since zswap now writes back pages from memcg-specific LRUs, we now need a
new stat to show writebacks count for each memcg.

[nphamcs@gmail.com: rename ZSWP_WB to ZSWPWB]
Link: https://lkml.kernel.org/r/20231205193307.2432803-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-5-nphamcs@gmail.com
Suggested-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zswap: make shrinking memcg-aware

Currently, we only have a single global LRU for zswap.  This makes it
impossible to perform worload-specific shrinking - an memcg cannot
determine which pages in the pool it owns, and often ends up writing pages
from other memcgs.  This issue has been previously observed in practice
and mitigated by simply disabling memcg-initiated shrinking:

https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u

This patch fully resolves the issue by replacing the global zswap LRU
with memcg- and NUMA-specific LRUs, and modify the reclaim logic:

a) When a store attempt hits an memcg limit, it now triggers a
   synchronous reclaim attempt that, if successful, allows the new
   hotter page to be accepted by zswap.
b) If the store attempt instead hits the global zswap limit, it will
   trigger an asynchronous reclaim attempt, in which an memcg is
   selected for reclaim in a round-robin-like fashion.

[nphamcs@gmail.com: use correct function for the onlineness check, use mem_cgroup_iter_break()]
Link: https://lkml.kernel.org/r/20231205195419.2563217-1-nphamcs@gmail.com
[nphamcs@gmail.com: drop the pool's reference at the end of the writeback step]
Link: https://lkml.kernel.org/r/20231206030627.4155634-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-4-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memcontrol: implement mem_cgroup_tryget_online()

This patch implements a helper function that try to get a reference to an
memcg's css, as well as checking if it is online.  This new function is
almost exactly the same as the existing mem_cgroup_tryget(), except for
the onlineness check.  In the !CONFIG_MEMCG case, it always returns true,
analogous to mem_cgroup_tryget().  This is useful for e.g to the new zswap
writeback scheme, where we need to select the next online memcg as a
candidate for the global limit reclaim.

Link: https://lkml.kernel.org/r/20231130194023.4102148-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

list_lru: allow explicit memcg and NUMA node selection

Patch series "workload-specific and memory pressure-driven zswap
writeback", v8.

There are currently several issues with zswap writeback:

1. There is only a single global LRU for zswap, making it impossible to
   perform worload-specific shrinking - an memcg under memory pressure
   cannot determine which pages in the pool it owns, and often ends up
   writing pages from other memcgs. This issue has been previously
   observed in practice and mitigated by simply disabling
   memcg-initiated shrinking:

   https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u

   But this solution leaves a lot to be desired, as we still do not
   have an avenue for an memcg to free up its own memory locked up in
   the zswap pool.

2. We only shrink the zswap pool when the user-defined limit is hit.
   This means that if we set the limit too high, cold data that are
   unlikely to be used again will reside in the pool, wasting precious
   memory. It is hard to predict how much zswap space will be needed
   ahead of time, as this depends on the workload (specifically, on
   factors such as memory access patterns and compressibility of the
   memory pages).

This patch series solves these issues by separating the global zswap LRU
into per-memcg and per-NUMA LRUs, and performs workload-specific (i.e
memcg- and NUMA-aware) zswap writeback under memory pressure.  The new
shrinker does not have any parameter that must be tuned by the user, and
can be opted in or out on a per-memcg basis.

As a proof of concept, we ran the following synthetic benchmark: build the
linux kernel in a memory-limited cgroup, and allocate some cold data in
tmpfs to see if the shrinker could write them out and improved the overall
performance.  Depending on the amount of cold data generated, we observe
from 14% to 35% reduction in kernel CPU time used in the kernel builds.

This patch (of 6):

The interface of list_lru is based on the assumption that the list node
and the data it represents belong to the same allocated on the correct
node/memcg.  While this assumption is valid for existing slab objects LRU
such as dentries and inodes, it is undocumented, and rather inflexible for
certain potential list_lru users (such as the upcoming zswap shrinker and
the THP shrinker).  It has caused us a lot of issues during our
development.

This patch changes list_lru interface so that the caller must explicitly
specify numa node and memcg when adding and removing objects.  The old
list_lru_add() and list_lru_del() are renamed to list_lru_add_obj() and
list_lru_del_obj(), respectively.

It also extends the list_lru API with a new function, list_lru_putback,
which undoes a previous list_lru_isolate call.  Unlike list_lru_add, it
does not increment the LRU node count (as list_lru_isolate does not
decrement the node count).  list_lru_putback also allows for explicit
memcg and NUMA node selection.

Link: https://lkml.kernel.org/r/20231130194023.4102148-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: simplify mas_leaf_set_meta()

Now it seems that the incoming 'end' is already pointing to the last item,
so we can simplify this function, considering only whether the last slot
is being used.  This has passed the maple tree test suite.

Link: https://lkml.kernel.org/r/20231120070937.35481-6-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: delete one of the two identical checks

There are two identical checks, delete one of them.

Link: https://lkml.kernel.org/r/20231120070937.35481-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove an unused parameter for ma_meta_end()

The parameter maple_type is not used, so remove it.

Link: https://lkml.kernel.org/r/20231120070937.35481-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: avoid ascending when mas->min is also the parent's minimum

When the child node is the first child of its parent node, mas->min does
not need to be updated. This can reduce the number of ascending times
in some cases.

Link: https://lkml.kernel.org/r/20231120070937.35481-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: move the check forward to avoid static check warning

Patch series "Some cleanups of maple tree", v2.

These are some small cleanups of maple tree.

This patch (of 5):

Put the check for gap before its reference to avoid Smatch static check
warnings.  This is not a bug, it's just a validation program.  Even with
this change, Smatch may still generate warnings because MT_BUG_ON()
doesn't necessarily stop the program.  It may require fixing Smatch itself
to avoid these warnings.

Link: https://lkml.kernel.org/r/20231120070937.35481-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20231120070937.35481-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lists.infradead.org/pipermail/maple-tree/2023-November/003046.html
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove unused function

The function are defined in the maple_tree.c file, but not called
elsewhere, so delete the unused function.

lib/maple_tree.c:689:29: warning: unused function 'mas_pivot'.

Link: https://lkml.kernel.org/r/20231027084944.24888-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7064
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: mtree_range_walk() clean up

mtree_range_walk() needed to be updated to avoid checking if there was a
pivot value.  On closer examination, the code could avoid setting min or
max in certain scenarios.  The commit removes the extra check for
pivot[offset] before setting max and only sets max when necessary.  It
also only sets min if it is necessary by checking offset 0 prior to the
loop (as it has always done).

The commit also drops a dead node check since the end of the node will
return the array size when the last slot is occupied (by a potential reuse
in a dead node).  The data will be discarded later if the node is marked
dead.

Benchmarking these changes results in an increase in performance of 5.45%
using the BENCH_WALK in the maple tree test code.

Link: https://lkml.kernel.org/r/20231101171629.3612299-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: don't find node end in mtree_lookup_walk()

Since the pivot being set is now reliable, the optimized loop no longer
needs to find the node end.  The redundant check for a dead node can also
be avoided as there is no danger of using the wrong pivot since the
results will be thrown out in the case of a dead node by the later check.

This patch also adds a benchmark test for the function to the maple tree
test framework.  The benchmark shows an average increase performance of
5.98% over 3 runs with this commit.

Link: https://lkml.kernel.org/r/20231101171629.3612299-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: use maple state end for write operations

ma_wr_state was previously tracking the end of the node for writing.
Since the implementation of the ma_state end tracking, this is duplicated
work.  This patch removes the maple write state tracking of the end of the
node and uses the maple state end instead.

Link: https://lkml.kernel.org/r/20231101171629.3612299-11-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove mas_searchable()

Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.

Link: https://lkml.kernel.org/r/20231101171629.3612299-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: separate ma_state node from status

The maple tree node is overloaded to keep status as well as the active
node.  This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure.  Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.

The status being an enum has the benefit of detecting unhandled status in
switch statements.

[Liam.Howlett@oracle.com: fix comments about MAS_*]
Link: https://lkml.kernel.org/r/20231106154124.614247-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: update forking to separate maple state and node]
Link: https://lkml.kernel.org/r/20231106154551.615042-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: fix mas_prev() state separation code]
Link: https://lkml.kernel.org/r/20231207193319.4025462-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20231101171629.3612299-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: clean up inlines for some functions

There are a few functions which were inlined but are somewhat too large to
inline, so remove the inline key word.

There are also several very small functions which are used in critical
code sections which gcc was not inlining, so make this more strict and use
__always_line for these functions.

Link: https://lkml.kernel.org/r/20231101171629.3612299-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: use cached node end in mas_destroy()

The node end is set during the walk, so use the resulting end instead of
re-fetching it.

Link: https://lkml.kernel.org/r/20231101171629.3612299-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: use cached node end in mas_next()

When looking for the next entry, don't recalculate the node end as it is
now tracked in the maple state.

Link: https://lkml.kernel.org/r/20231101171629.3612299-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: add end of node tracking to the maple state

Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node.  This time can be
greatly reduced if the end of the node is cached in the maple state.  Care
must be taken to update & invalidate as necessary.

Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: move debug check to __mas_set_range()

__mas_set_range() was created to shortcut resetting the maple state and a
debug check was added to the caller (the vma iterator) to ensure the
internal maple state remains safe to use.  Move the debug check from the
vma iterator into the maple tree itself so other users do not incorrectly
use the advanced maple state modification.

Fallout from this change include a large amount of debug setup needed to
be moved to earlier in the header, and the maple_tree.h radix-tree test
code needed to move the inclusion of the header to after the atomic
define.  None of those changes have functional changes.

Link: https://lkml.kernel.org/r/20231101171629.3612299-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: make mas_erase() more robust

mas_erase() may not deal correctly with all maple states.  Make the
function more robust by ensuring the state is in one of the two acceptable
states.

Link: https://lkml.kernel.org/r/20231101171629.3612299-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove unnecessary default labels from switch statements

Patch series "maple_tree: iterator state changes".

These patches have some general cleanup and a change to separate the maple
state status tracking from the maple state node.

The maple state status change allows for walks to continue from previous
places when the status needs to be recorded to make logical sense for the
next call to the maple state.  For instance, it allows for prev/next to
function in a way that better resembles the linked list.  It also allows
switch statements to be used to detect missed states during compile, and
the addition of fast-path "active" state is cleaner as an enum.

While making the status change, perf showed some very small (one line)
functions that were not inlined even with the inline key word.  Making
these small functions __always_inline is less expensive according to perf.
As part of that change, some inlines have been dropped from larger
functions.

Perf also showed that the commonly used mas_for_each() iterator was
spending a lot of time finding the end of the node.  This series
introduces caching of the end of the node in the maple state (and updating
it during writes).  This caching along with the inline changes yielded at
23.25% improvement on the BENCH_MAS_FOR_EACH maple tree test framework
benchmark.

I've also included a change to mtree_range_walk and mtree_lookup_walk to
take advantage of Peng's change [1] to the initial pivot setup.

mmtests did not produce any significant gains.

[1] https://lore.kernel.org/all/20230711035444.526-1-zhangpeng.00@bytedance.com/T/#u

This patch (of 12):

Removing the default types from the switch statements will cause compile
warnings on missing cases.

Link: https://lkml.kernel.org/r/20231101171629.3612299-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: record and report more information

Record and report more information to help us find the cause of the bug
and to help us correlate the error with other system events.

This patch adds recording and showing CPU number and timestamp at
allocation and free (controlled by CONFIG_KASAN_EXTRA_INFO).  The
timestamps in the report use the same format and source as printk.

Error occurrence timestamp is already implicit in the printk log, and CPU
number is already shown by dump_stack_lvl, so there is no need to add it.

In order to record CPU number and timestamp at allocation and free,
corresponding members need to be added to the relevant data structures,
which will lead to increased memory consumption.

In Generic KASAN, members are added to struct kasan_track.  Since in most
cases, alloc meta is stored in the redzone and free meta is stored in the
object or the redzone, memory consumption will not increase much.

In SW_TAGS KASAN and HW_TAGS KASAN, members are added to struct
kasan_stack_ring_entry.  Memory consumption increases as the size of
struct kasan_stack_ring_entry increases (this part of the memory is
allocated by memblock), but since this is configurable, it is up to the
user to choose.

Link: https://lkml.kernel.org/r/VI1P193MB0752BD991325D10E4AB1913599BDA@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: use kmap_local_page()

Use kmap_local_page() instead of kmap_atomic() which has been
deprecated.

Link: https://lkml.kernel.org/r/20231128083845.848008-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: memcg: add reminder comment for the memcg v2 events

To maintain the correct state, it is important to ensure that events for
the memory cgroup v2 are aligned with the sample cgroup codes.

Link: https://lkml.kernel.org/r/20231123071945.25811-4-ddrokosov@salutedevices.com
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

samples/cgroup: introduce memcg memory.events listener

This is a simple listener for memory events that handles counter changes
in runtime.  It can be set up for a specific memory cgroup v2.

The output example:
=====
$ /tmp/memcg_event_listener test
Initialized MEMCG events with counters:
MEMCG events:
low: 0
high: 0
max: 0
oom: 0
oom_kill: 0
oom_group_kill: 0
Started monitoring memory events from '/sys/fs/cgroup/test/memory.events'...
Received event in /sys/fs/cgroup/test/memory.events:
*** 1 MEMCG oom_kill event, change counter 0 => 1
Received event in /sys/fs/cgroup/test/memory.events:
*** 1 MEMCG oom_kill event, change counter 1 => 2
Received event in /sys/fs/cgroup/test/memory.events:
*** 1 MEMCG oom_kill event, change counter 2 => 3
Received event in /sys/fs/cgroup/test/memory.events:
*** 1 MEMCG oom_kill event, change counter 3 => 4
Received event in /sys/fs/cgroup/test/memory.events:
*** 2 MEMCG max events, change counter 0 => 2
Received event in /sys/fs/cgroup/test/memory.events:
*** 8 MEMCG max events, change counter 2 => 10
*** 1 MEMCG oom event, change counter 0 => 1
Received event in /sys/fs/cgroup/test/memory.events:
*** 1 MEMCG oom_kill event, change counter 4 => 5
^CExiting memcg event listener...
=====

Link: https://lkml.kernel.org/r/20231123071945.25811-3-ddrokosov@salutedevices.com
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

samples: introduce new samples subdir for cgroup

Patch series "samples: introduce cgroup events listeners", v3.

To begin with, this patch series relocates the cgroup example code to the
samples/cgroup directory, which is the appropriate location for such code
snippets.

Furthermore, a new memcg events listener is introduced.  This listener is
a simple yet effective tool for monitoring memory events and managing
counter changes during runtime.

Additionally, as per Andrew Morton's suggestion, a helpful reminder
comment is included in the memcontrol implementation.  This comment serves
to ensure that the samples code is updated whenever new events are added.

This patch (of 3):

Move the cgroup_event_listener for cgroup v1 to the samples directory.
This suggestion was proposed by Andrew Morton during the discussion [1].

Link: https://lore.kernel.org/all/20231106140934.3f5d4960141562fe8da53906@linux-foundation.org/
Link: https://lkml.kernel.org/r/20231123071945.25811-1-ddrokosov@salutedevices.com
Link: https://lkml.kernel.org/r/20231123071945.25811-2-ddrokosov@salutedevices.com
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: convert page to folio

There are still some places where it does not be converted to folio, this
patch convert all of them to folio.  And this patch also does some trival
cleanup to fix the code style problems.

Link: https://lkml.kernel.org/r/20231127084645.27017-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: move PageVmemmapSelfHosted() check to split_vmemmap_huge_pmd()

To check a page whether it is self-hosted needs to traverse the page table
(e.g.  pmd_off_k()), however, we already have done this in the next
calling of vmemmap_remap_range().  Moving PageVmemmapSelfHosted() check to
vmemmap_pmd_entry() could simplify the code a bit.

Link: https://lkml.kernel.org/r/20231127084645.27017-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: use walk_page_range_novma() to simplify the code

It is unnecessary to implement a series of dedicated page table walking
helpers since there is already a general one walk_page_range_novma().  So
use it to simplify the code.

Link: https://lkml.kernel.org/r/20231127084645.27017-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: pagewalk: assert write mmap lock only for walking the user page tables

The 8782fb61cc848 ("mm: pagewalk: Fix race between unmap and page walker")
introduces an assertion to walk_page_range_novma() to make all the users
of page table walker is safe.  However, the race only exists for walking
the user page tables.  And it is ridiculous to hold a particular user mmap
write lock against the changes of the kernel page tables.  So only assert
at least mmap read lock when walking the kernel page tables.  And some
users matching this case could downgrade to a mmap read lock to relief the
contention of mmap lock of init_mm, it will be nicer in hugetlb (only
holding mmap read lock) in the next patch.

Link: https://lkml.kernel.org/r/20231127084645.27017-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/swapfile: replace kmap_atomic() with kmap_local_page()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page() in swapfile.c.

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

In mm/swapfile.c, the blocks of code between the mappings and un-mappings
do not depend on the above-mentioned side effects of kmap_atomic(), so
that the mere replacements of the old API with the new one is all that is
required (i.e., there is no need to explicitly call pagefault_disable()
and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231127155452.586387-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zswap: replace kmap_atomic() with kmap_local_page()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page() in
zswap.c.

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

In mm/zswap.c, the blocks of code between the mappings and un-mappings do
not depend on the above-mentioned side effects of kmap_atomic(), so that
the mere replacements of the old API with the new one is all that is
required (i.e., there is no need to explicitly call pagefault_disable()
and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231127160058.586446-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm, oom:dump_tasks add rss detailed information printing

When the system is under oom, it prints out the RSS information of each
process.  However, we don't know the size of rss_anon, rss_file, and
rss_shmem.

To distinguish the memory occupied by anonymous or file mappings
or shmem, could help us identify the root cause of the oom.

So this patch adds RSS details, which refers to the /proc/<pid>/status[1].
It can help us know more about process memory usage.

Example of oom including the new rss_* fields:
[ 1630.902466] Tasks state (memory values in pages):
[ 1630.902870] [  pid  ]   uid  tgid total_vm      rss rss_anon rss_file rss_shmem pgtables_bytes swapents oom_score_adj name
[ 1630.903619] [    149]     0   149      486      288        0      288         0    36864        0             0 ash
[ 1630.904210] [    156]     0   156   153531   153345   153345        0         0  1269760        0             0 mm_test

[1] commit 8cee852ec53f ("mm, procfs: breakdown RSS for anon, shmem and file in /proc/pid/status").

Link: https://lkml.kernel.org/r/202311231840181856667@zte.com.cn
Signed-off-by: Yong Wang <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: list_lru: Update kernel documentation to follow the requirements

kernel-doc is not happy about documentation in list_lru.h:

list_lru.h:90: warning: Function parameter or member 'lru' not described in 'list_lru_add'
list_lru.h:90: warning: Excess function parameter 'list_lru' description in 'list_lru_add'
list_lru.h:90: warning: No description found for return value of 'list_lru_add'
list_lru.h:103: warning: Function parameter or member 'lru' not described in 'list_lru_del'
list_lru.h:103: warning: Excess function parameter 'list_lru' description in 'list_lru_del'
list_lru.h:103: warning: No description found for return value of 'list_lru_del'
list_lru.h:116: warning: No description found for return value of 'list_lru_count_one'
list_lru.h:168: warning: No description found for return value of 'list_lru_walk_one'
list_lru.h:185: warning: No description found for return value of 'list_lru_walk_one_irq'

Fix the documentation accordingly.

While at it, fix the references to the parameters in functions
inside the long descriptions, on which the above script is not
complaining (yet?).

Link: https://lkml.kernel.org/r/20231123172320.2434780-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/gup: fix follow_devmap_p[mu]d() on page==NULL handling

This is a bug found not by any report but only by code observations.

When GUP sees a devpmd/devpud and if page==NULL is returned, it means a
fault is probably required.  Here falling through when page==NULL can
cause unexpected behavior.

Fix both cases by catching the page==NULL cases with no_page_table().

Link: https://lkml.kernel.org/r/20231123180222.1048297-1-peterx@redhat.com
Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Fixes: 080dbb618b4b ("mm/follow_page_mask: split follow_page_mask to smaller functions.")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: page_alloc: unreserve highatomic page blocks before oom

__alloc_pages_direct_reclaim() is called from slowpath allocation where
high atomic reserves can be unreserved after there is a progress in
reclaim and yet no suitable page is found.  Later should_reclaim_retry()
gets called from slow path allocation to decide if the reclaim needs to be
retried before OOM kill path is taken.

should_reclaim_retry() checks the available(reclaimable + free pages)
memory against the min wmark levels of a zone and returns:

a) true, if it is above the min wmark so that slow path allocation will
   do the reclaim retries.

b) false, thus slowpath allocation takes oom kill path.

should_reclaim_retry() can also unreserves the high atomic reserves **but
only after all the reclaim retries are exhausted.**

In a case where there are almost none reclaimable memory and free pages
contains mostly the high atomic reserves but allocation context can't use
these high atomic reserves, makes the available memory below min wmark
levels hence false is returned from should_reclaim_retry() leading the
allocation request to take OOM kill path.  This can turn into a early oom
kill if high atomic reserves are holding lot of free memory and
unreserving of them is not attempted.

(early)OOM is encountered on a VM with the below state:
[  295.998653] Normal free:7728kB boost:0kB min:804kB low:1004kB
high:1204kB reserved_highatomic:8192KB active_anon:4kB inactive_anon:0kB
active_file:24kB inactive_file:24kB unevictable:1220kB writepending:0kB
present:70732kB managed:49224kB mlocked:0kB bounce:0kB free_pcp:688kB
local_pcp:492kB free_cma:0kB
[  295.998656] lowmem_reserve[]: 0 32
[  295.998659] Normal: 508*4kB (UMEH) 241*8kB (UMEH) 143*16kB (UMEH)
33*32kB (UH) 7*64kB (UH) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB
0*4096kB = 7752kB

Per above log, the free memory of ~7MB exist in the high atomic reserves
is not freed up before falling back to oom kill path.

Fix it by trying to unreserve the high atomic reserves in
should_reclaim_retry() before __alloc_pages_direct_reclaim() can fallback
to oom kill path.

Link: https://lkml.kernel.org/r/1700823445-27531-1-git-send-email-quic_charante@quicinc.com
Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: page_alloc: enforce minimum zone size to do high atomic reserves

Highatomic reserves are set to roughly 1% of zone for maximum and a
pageblock size for minimum.  Encountered a system with the below
configuration:
Normal free:7728kB boost:0kB min:804kB low:1004kB high:1204kB
reserved_highatomic:8192KB managed:49224kB

On such systems, even a single pageblock makes highatomic reserves are set
to ~8% of the zone memory.  This high value can easily exert pressure on
the zone.

Per discussion with Michal and Mel, it is not much useful to reserve the
memory for highatomic allocations on such small systems[1].  Since the
minimum size for high atomic reserves is always going to be a pageblock
size and if 1% of zone managed pages is going to be below pageblock size,
don't reserve memory for high atomic allocations.  Thanks Michal for this
suggestion[2].

Since no memory is being reserved for high atomic allocations and if
respective allocation failures are seen, this patch can be reverted.

[1] https://lore.kernel.org/linux-mm/20231117161956.d3yjdxhhm4rhl7h2@techsingularity.net/
[2] https://lore.kernel.org/linux-mm/ZVYRJMUitykepLRy@tiehlicka/

Link: https://lkml.kernel.org/r/c3a2a48e2cfe08176a80eaf01c110deb9e918055.1700821416.git.quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: page_alloc: correct high atomic reserve calculations

Patch series "mm: page_alloc: fixes for high atomic reserve
caluculations", v3.

The state of the system where the issue exposed shown in oom kill logs:

[  295.998653] Normal free:7728kB boost:0kB min:804kB low:1004kB high:1204kB reserved_highatomic:8192KB active_anon:4kB inactive_anon:0kB active_file:24kB inactive_file:24kB unevictable:1220kB writepending:0kB present:70732kB managed:49224kB mlocked:0kB bounce:0kB free_pcp:688kBlocal_pcp:492kB free_cma:0kB
[  295.998656] lowmem_reserve[]: 0 32
[  295.998659] Normal: 508*4kB (UMEH) 241*8kB (UMEH) 143*16kB (UMEH)
33*32kB (UH) 7*64kB (UH) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 7752kB

From the above, it is seen that ~16MB of memory reserved for high atomic
reserves against the expectation of 1% reserves which is fixed in the 1st
patch.

Don't reserve the high atomic page blocks if 1% of zone memory size is
below a pageblock size.

This patch (of 2):

reserve_highatomic_pageblock() aims to reserve the 1% of the managed pages
of a zone, which is used for the high order atomic allocations.

It uses the below calculation to reserve:
static void reserve_highatomic_pageblock(struct page *page, ....) {

   .......
   max_managed = (zone_managed_pages(zone) / 100) + pageblock_nr_pages;

   if (zone->nr_reserved_highatomic >= max_managed)
       goto out;

   zone->nr_reserved_highatomic += pageblock_nr_pages;
   set_pageblock_migratetype(page, MIGRATE_HIGHATOMIC);
   move_freepages_block(zone, page, MIGRATE_HIGHATOMIC, NULL);

out:
   ....
}

Since we are always appending the 1% of zone managed pages count to
pageblock_nr_pages, the minimum it is turning into 2 pageblocks as the
nr_reserved_highatomic is incremented/decremented in pageblock sizes.

Encountered a system(actually a VM running on the Linux kernel) with the
below zone configuration:
Normal free:7728kB boost:0kB min:804kB low:1004kB high:1204kB
reserved_highatomic:8192KB managed:49224kB

The existing calculations making it to reserve the 8MB(with pageblock size
of 4MB) i.e.  16% of the zone managed memory.  Reserving such high amount
of memory can easily exert memory pressure in the system thus may lead
into unnecessary reclaims till unreserving of high atomic reserves.

Since high atomic reserves are managed in pageblock size granules, as
MIGRATE_HIGHATOMIC is set for such pageblock, fix the calculations for
high atomic reserves as, minimum is pageblock size , maximum is
approximately 1% of the zone managed pages.

Link: https://lkml.kernel.org/r/cover.1700821416.git.quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1660034138397b82a0a8b6ae51cbe96bd583d89e.1700821416.git.quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/Kconfig: make hugetlbfs a menuconfig

Hugetlb vmemmap default option (HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON)
is a sub-option to hugetlbfs, but it shows in the same level as hugetlbfs
itself, under "Pesudo filesystems".

Make the vmemmap option a sub-option to hugetlbfs, by changing hugetlbfs
into a menuconfig.  When moving it, fix a typo 'v' spot by Randy.

Link: https://lkml.kernel.org/r/20231124151902.1075697-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mm_init.c: append newline to the unavailable ranges log-message

Based on the init_unavailable_range() method and it's callee semantics no
multi-line info messages are intended to be printed to the console.  Thus
append the '\n' symbol to the respective info string.

Link: https://lkml.kernel.org/r/20231122182419.30633-7-fancer.lancer@gmail.com
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mm_init.c: extend init unavailable range doc info

Besides of the already described reasons the pages backended memory holes
might be persistent due to having memory mapped IO spaces behind those
ranges in the framework of flatmem kernel config.  Add such note to the
init_unavailable_range() method kdoc in order to point out to one more
reason of having the function executed for such regions.

[fancer.lancer@gmail.com: update per Mike]
Link: https://lkml.kernel.org/r/20231202111855.18392-1-fancer.lancer@gmail.com
Link: https://lkml.kernel.org/r/20231122182419.30633-6-fancer.lancer@gmail.com
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pgtable: rename ptdesc _refcount field to __page_refcount

Rename ptdesc _refcount field to __page_refcount similar to the other
unused page fields.

Link: https://lkml.kernel.org/r/982bdc652ba79a606c3d01c905766e7e076b3315.1700594815.git.agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Suggested-by: Vishal Moola <vishal.moola@gmail.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pgtable: fix s390 ptdesc field comments

Patch series "minor ptdesc updates", v3.

This patch (of 2):

Since commit d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE") there
is no fragmented page tracking on s390.  Fix the corresponding comments.

Link: https://lkml.kernel.org/r/cover.1700594815.git.agordeev@linux.ibm.com
Link: https://lkml.kernel.org/r/2eead241f3a45bed26c7911cf66bded1e35670b8.1700594815.git.agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/core-test: test damon_split_region_at()'s access rate copying

damon_split_region_at() should set access rate related fields of the
resulting regions same.  It may forgotten, and actually there was the
mistake before.  Test it with the unit test case for the function.

Link: https://lkml.kernel.org/r/20231119171529.66863-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: improve free meta storage in Generic KASAN

Currently free meta can only be stored in object if the object is not
smaller than free meta.

After the improvement, when the object is smaller than free meta and SLUB
DEBUG is not enabled, it is possible to store part of the free meta in the
object, reducing the increased size of the red zone.

Example:

free meta size: 16 bytes
alloc meta size: 16 bytes
object size: 8 bytes
optimal redzone size (object_size <= 64): 16 bytes

Before improvement:
actual redzone size = alloc meta size + free meta size = 32 bytes

After improvement:
actual redzone size = alloc meta size + (free meta size - object size)
                    = 24 bytes

[juntong.deng@outlook.com: make kasan_metadata_size() adapt to the improved free meta storage]
Link: https://lkml.kernel.org/r/VI1P193MB0752675D6E0A2D16CE656F8299BAA@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/VI1P193MB0752DE2CCD9046B5FED0AA8E99B5A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_poison: replace kmap_atomic() with kmap_local_page()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page().

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

The code blocks between the mappings and un-mappings do not rely on the
above-mentioned side effects of kmap_atomic(), so that mere replacements
of the old API with the new one is all that they require (i.e., there is
no need to explicitly call pagefault_disable() and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231120142836.7219-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mempool: replace kmap_atomic() with kmap_local_page()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page().

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

The code blocks between the mappings and un-mappings don't rely on the
above-mentioned side effects of kmap_atomic(), so that mere replacements
of the old API with the new one is all that they require (i.e., there is
no need to explicitly call pagefault_disable() and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231120142640.7077-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: use kmap_local_page() in __wp_page_copy_user()

kmap_atomic() has been deprecated in favor of kmap_local_{folio,page}.

Therefore, replace kmap_atomic() with kmap_local_page in
__wp_page_copy_user().

kmap_atomic() disables preemption in !PREEMPT_RT kernels and
unconditionally disables also page-faults.  My limited knowledge of the
implementation of __wp_page_copy_user() makes me think that the latter
side effect is still needed here, but kmap_local_page() is implemented not
to disable page-faults.

So, in addition to the conversion to local mapping, add explicit
pagefault_disable() / pagefault_enable() between mapping and un-mapping.

Link: https://lkml.kernel.org/r/20231120142418.6977-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/ksm: use kmap_local_page() in calc_checksum()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page() in
calc_checksum().

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

In calc_checksum(), the block of code between the mapping and un-mapping
does not depend on the above-mentioned side effects of kmap_aatomic(), so
that a mere replacements of the old API with the new one is all that is
required (i.e., there is no need to explicitly call pagefault_disable()
and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231120141855.6761-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/util: use kmap_local_page() in memcmp_pages()

kmap_atomic() has been deprecated in favor of kmap_local_page().

Therefore, replace kmap_atomic() with kmap_local_page() in memcmp_pages().

kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels).  The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).

With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts).  The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.

In memcmp_pages(), the block of code between the mapping and un-mapping
does not depend on the above-mentioned side effects of kmap_aatomic(), so
that mere replacements of the old API with the new one is all that is
required (i.e., there is no need to explicitly call pagefault_disable()
and/or preempt_disable()).

Link: https://lkml.kernel.org/r/20231120141554.6612-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: use vmem_altmap code without CONFIG_ZONE_DEVICE

vmem_altmap_free() and vmem_altmap_offset() could be utlized without
CONFIG_ZONE_DEVICE enabled.  For example,
mm/memory_hotplug.c:__add_pages() relies on that.  The altmap is no longer
restricted to ZONE_DEVICE handling, but instead depends on
CONFIG_SPARSEMEM_VMEMMAP.

When CONFIG_SPARSEMEM_VMEMMAP is disabled, these functions are defined as
inline stubs, ensuring compatibility with configurations that do not use
sparsemem vmemmap.  Without it, lkp reported the following:

ld: arch/x86/mm/init_64.o: in function `remove_pagetable':
init_64.c:(.meminit.text+0xfc7): undefined reference to
`vmem_altmap_free'

Link: https://lkml.kernel.org/r/20231120145354.308999-4-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311180545.VeyRXEDq-lkp@intel.com/
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: adjust DEPOT_POOLS_CAP for KMSAN

KMSAN is frequently used in fuzzing scenarios and thus saves a lot of
stack traces.  As KMSAN does not support evicting stack traces from the
stack depot, the stack depot capacity might be reached quickly with large
stack records.

Adjust the maximum number of stack depot pools for this case.

The average size of a stack trace saved into the stack depot is ~16
frames.  Thus, adjust the maximum pools number accordingly to keep the
maximum number of stack traces that can be saved into the stack depot
similar to the one that was allowed before the stack trace eviction
changes.

Link: https://lkml.kernel.org/r/301a115cf7ce8ddb42ef6de9151c2bb76ba728fc.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: use stack_depot_put for Generic mode

Evict alloc/free stack traces from the stack depot for Generic KASAN once
they are evicted from the quaratine.

For auxiliary stack traces, evict the oldest stack trace once a new one is
saved (KASAN only keeps references to the last two).

Also evict all saved stack traces on krealloc.

To avoid double-evicting and mis-evicting stack traces (in case KASAN's
metadata was corrupted), reset KASAN's per-object metadata that stores
stack depot handles when the object is initialized and when it's evicted
from the quarantine.

Note that stack_depot_put is no-op if the handle is 0.

Link: https://lkml.kernel.org/r/5cef104d9b842899489b4054fe8d1339a71acee0.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

slub, kasan: improve interaction of KASAN and slub_debug poisoning

When both KASAN and slub_debug are enabled, when a free object is being
prepared in setup_object, slub_debug poisons the object data before KASAN
initializes its per-object metadata.

Right now, in setup_object, KASAN only initializes the alloc metadata,
which is always stored outside of the object.  slub_debug is aware of this
and it skips poisoning and checking that memory area.

However, with the following patch in this series, KASAN also starts
initializing its free medata in setup_object.  As this metadata might be
stored within the object, this initialization might overwrite the
slub_debug poisoning.  This leads to slub_debug reports.

Thus, skip checking slub_debug poisoning of the object data area that
overlaps with the in-object KASAN free metadata.

Also make slub_debug poisoning of tail kmalloc redzones more precise when
KASAN is enabled: slub_debug can still poison and check the tail kmalloc
allocation area that comes after the KASAN free metadata.

Link: https://lkml.kernel.org/r/20231122231202.121277-1-andrey.konovalov@linux.dev
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: use stack_depot_put for tag-based modes

Make tag-based KASAN modes evict stack traces from the stack depot once
they are evicted from the stack ring.

Internally, pass STACK_DEPOT_FLAG_GET to stack_depot_save_flags (via
kasan_save_stack) to increment the refcount when saving a new entry to
stack ring and call stack_depot_put when removing an entry from stack
ring.

Link: https://lkml.kernel.org/r/b4773e5c1b0b9df6826ec0b65c1923feadfa78e5.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: check object_size in kasan_complete_mode_report_info

Check the object size when looking up entries in the stack ring.

If the size of the object for which a report is being printed does not
match the size of the object for which a stack trace has been saved in the
stack ring, the saved stack trace is irrelevant.

Link: https://lkml.kernel.org/r/68c6948175aadd7e7e7deea61725103d64a4528f.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: remove atomic accesses to stack ring entries

Remove the atomic accesses to entry fields in save_stack_info and
kasan_complete_mode_report_info for tag-based KASAN modes.

These atomics are not required, as the read/write lock prevents the
entries from being read (in kasan_complete_mode_report_info) while being
written (in save_stack_info) and the try_cmpxchg prevents the same entry
from being rewritten (in save_stack_info) in the unlikely case of wrapping
during writing.

Link: https://lkml.kernel.org/r/29f59126d9845c5257b6c29cd7ad113b16f19f47.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: allow users to evict stack traces

Add stack_depot_put, a function that decrements the reference counter on a
stack record and removes it from the stack depot once the counter reaches
0.

Internally, when removing a stack record, the function unlinks it from the
hash table bucket and returns to the freelist.

With this change, the users of stack depot can call stack_depot_put when
keeping a stack trace in the stack depot is not needed anymore.  This
allows avoiding polluting the stack depot with irrelevant stack traces and
thus have more space to store the relevant ones before the stack depot
reaches its capacity.

Link: https://lkml.kernel.org/r/1d1ad5692ee43d4fc2b3fd9d221331d30b36123f.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: add refcount for records

Add a reference counter for how many times a stack records has been
  added to stack depot.

Add a new STACK_DEPOT_FLAG_GET flag to stack_depot_save_flags that
  instructs the stack depot to increment the refcount.

Do not yet decrement the refcount; this is implemented in one of the
  following patches.

Do not yet enable any users to use the flag to avoid overflowing the
  refcount.

This is preparatory patch for implementing the eviction of stack records
  from the stack depot.

Link: https://lkml.kernel.org/r/a3fc14a2359d019d2a008d4ff8b46a665371ffee.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot, kasan: add flags to __stack_depot_save and rename

Change the bool can_alloc argument of __stack_depot_save to a u32
  argument that accepts a set of flags.

The following patch will add another flag to stack_depot_save_flags
  besides the existing STACK_DEPOT_FLAG_CAN_ALLOC.

Also rename the function to stack_depot_save_flags, as
  __stack_depot_save is a cryptic name,

Link: https://lkml.kernel.org/r/645fa15239621eebbd3a10331e5864b718839512.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmsan: use stack_depot_save instead of __stack_depot_save

Make KMSAN use stack_depot_save instead of __stack_depot_save, as it
  always passes true to __stack_depot_save as the last argument.

Link: https://lkml.kernel.org/r/18092240699efdc6acd78b51e41ea782953e6c8d.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: use list_head for stack record links

Switch stack_record to use list_head for links in the hash table and in
  the freelist.

This will allow removing entries from the hash table buckets.

This is preparatory patch for implementing the eviction of stack records
  from the stack depot.

Link: https://lkml.kernel.org/r/4787d9a584cd33433d9ee1846b17fa3d3e1987ad.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: use read/write lock

Currently, stack depot uses the following locking scheme:

1. Lock-free accesses when looking up a stack record, which allows to
   have multiple users to look up records in parallel;
2. Spinlock for protecting the stack depot pools and the hash table
   when adding a new record.

For implementing the eviction of stack traces from stack depot, the
  lock-free approach is not going to work anymore, as we will need to be
  able to also remove records from the hash table.

Convert the spinlock into a read/write lock, and drop the atomic
  accesses, as they are no longer required.

Looking up stack traces is now protected by the read lock and adding new
  records - by the write lock.  One of the following patches will add a
  new function for evicting stack records, which will be protected by the
  write lock as well.

With this change, multiple users can still look up records in parallel.

This is preparatory patch for implementing the eviction of stack records
  from the stack depot.

Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: store free stack records in a freelist

Instead of using the global pool_offset variable to find a free slot when
storing a new stack record, mainlain a freelist of free slots within the
allocated stack pools.

A global next_stack variable is used as the head of the freelist, and the
next field in the stack_record struct is reused as freelist link (when the
record is not in the freelist, this field is used as a link in the hash
table).

This is preparatory patch for implementing the eviction of stack records
from the stack depot.

Link: https://lkml.kernel.org/r/b9e4c79955c2121b69301778643b203d3fb09ccc.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: store next pool pointer in new_pool

Instead of using the last pointer in stack_pools for storing the pointer
to a new pool (which does not yet store any stack records), use a new
new_pool variable.

This a purely code readability change: it seems more logical to store the
pointer to a pool with a special meaning in a dedicated variable.

Link: https://lkml.kernel.org/r/448bc18296c16bef95cb3167697be6583dcc8ce3.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: rename next_pool_required to new_pool_required

Rename next_pool_required to new_pool_required.

This a purely code readability change: the following patch will change
stack depot to store the pointer to the new pool in a separate variable,
and "new" seems like a more logical name.

Link: https://lkml.kernel.org/r/fd7cd6c6eb250c13ec5d2009d75bb4ddd1470db9.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: rework helpers for depot_alloc_stack

Split code in depot_alloc_stack and depot_init_pool into 3 functions:

1. depot_keep_next_pool that keeps preallocated memory for the next pool
   if required.

2. depot_update_pools that moves on to the next pool if there's no space
   left in the current pool, uses preallocated memory for the new current
   pool if required, and calls depot_keep_next_pool otherwise.

3. depot_alloc_stack that calls depot_update_pools and then allocates
   a stack record as before.

This makes it somewhat easier to follow the logic of depot_alloc_stack and
also serves as a preparation for implementing the eviction of stack
records from the stack depot.

Link: https://lkml.kernel.org/r/71fb144d42b701fcb46708d7f4be6801a4a8270e.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: fix and clean-up atomic annotations

Drop smp_load_acquire from next_pool_required in depot_init_pool, as both
depot_init_pool and the all smp_store_release's to this variable are
executed under the stack depot lock.

Also simplify and clean up comments accompanying the use of atomic
accesses in the stack depot code.

Link: https://lkml.kernel.org/r/c118ef044d8db80248d9e1f14592c72e8429e9d9.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: use fixed-sized slots for stack records

Instead of storing stack records in stack depot pools one right after
another, use fixed-sized slots.

Add a new Kconfig option STACKDEPOT_MAX_FRAMES that allows to select the
size of the slot in frames.  Use 64 as the default value, which is the
maximum stack trace size both KASAN and KMSAN use right now.

Also add descriptions for other stack depot Kconfig options.

This is preparatory patch for implementing the eviction of stack records
from the stack depot.

Link: https://lkml.kernel.org/r/dce7d030a99ff61022509665187fac45b0827298.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: add depot_fetch_stack helper

Add a helper depot_fetch_stack function that fetches the pointer to a
stack record.

With this change, all static depot_* functions now operate on stack pools
and the exported stack_depot_* functions operate on the hash table.

Link: https://lkml.kernel.org/r/170d8c202f29dc8e3d5491ee074d1e9e029a46db.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: drop valid bit from handles

Stack depot doesn't use the valid bit in handles in any way, so drop it.

Link: https://lkml.kernel.org/r/34969bba2ca6e012c6ad071767197dee64dc5723.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: simplify __stack_depot_save

The retval local variable in __stack_depot_save has the union type
handle_parts, but the function never uses anything but the union's handle
field.

Define retval simply as depot_stack_handle_t to simplify the code.

Link: https://lkml.kernel.org/r/3b0763c8057a1cf2f200ff250a5f9580ee36a28c.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: check disabled flag when fetching

Do not try fetching a stack trace from the stack depot if the
stack_depot_disabled flag is enabled.

Link: https://lkml.kernel.org/r/c3bfa3b7ab00b2e48ab75a3fbb9c67555777cb08.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/stackdepot: print disabled message only if truly disabled

Patch series "stackdepot: allow evicting stack traces", v4.

Currently, the stack depot grows indefinitely until it reaches its
capacity.  Once that happens, the stack depot stops saving new stack
traces.

This creates a problem for using the stack depot for in-field testing and
in production.

For such uses, an ideal stack trace storage should:

1. Allow saving fresh stack traces on systems with a large uptime while
   limiting the amount of memory used to store the traces;
2. Have a low performance impact.

Implementing #1 in the stack depot is impossible with the current
keep-forever approach.  This series targets to address that.  Issue #2 is
left to be addressed in a future series.

This series changes the stack depot implementation to allow evicting
unneeded stack traces from the stack depot.  The users of the stack depot
can do that via new stack_depot_save_flags(STACK_DEPOT_FLAG_GET) and
stack_depot_put APIs.

Internal changes to the stack depot code include:

1. Storing stack traces in fixed-frame-sized slots (vs precisely-sized
   slots in the current implementation); the slot size is controlled via
   CONFIG_STACKDEPOT_MAX_FRAMES (default: 64 frames);
2. Keeping available slots in a freelist (vs keeping an offset to the next
   free slot);
3. Using a read/write lock for synchronization (vs a lock-free approach
   combined with a spinlock).

This series also integrates the eviction functionality into KASAN: the
tag-based modes evict stack traces when the corresponding entry leaves the
stack ring, and Generic KASAN evicts stack traces for objects once those
leave the quarantine.

With KASAN, despite wasting some space on rounding up the size of each
stack record, the total memory consumed by stack depot gets saturated due
to the eviction of irrelevant stack traces from the stack depot.

With the tag-based KASAN modes, the average total amount of memory used
for stack traces becomes ~0.5 MB (with the current default stack ring size
of 32k entries and the default CONFIG_STACKDEPOT_MAX_FRAMES of 64).  With
Generic KASAN, the stack traces take up ~1 MB per 1 GB of RAM (as the
quarantine's size depends on the amount of RAM).

However, with KMSAN, the stack depot ends up using ~4x more memory per a
stack trace than before.  Thus, for KMSAN, the stack depot capacity is
increased accordingly.  KMSAN uses a lot of RAM for shadow memory anyway,
so the increased stack depot memory usage will not make a significant
difference.

Other users of the stack depot do not save stack traces as often as KASAN
and KMSAN.  Thus, the increased memory usage is taken as an acceptable
trade-off.  In the future, these other users can take advantage of the
eviction API to limit the memory waste.

There is no measurable boot time performance impact of these changes for
KASAN on x86-64.  I haven't done any tests for arm64 modes (the stack
depot without performance optimizations is not suitable for intended use
of those anyway), but I expect a similar result.  Obtaining and copying
stack trace frames when saving them into stack depot is what takes the
most time.

This series does not yet provide a way to configure the maximum size of
the stack depot externally (e.g.  via a command-line parameter).  This
will be added in a separate series, possibly together with the performance
improvement changes.

This patch (of 22):

Currently, if stack_depot_disable=off is passed to the kernel command-line
after stack_depot_disable=on, stack depot prints a message that it is
disabled, while it is actually enabled.

Fix this by moving printing the disabled message to
stack_depot_early_init.  Place it before the
__stack_depot_early_init_requested check, so that the message is printed
even if early stack depot init has not been requested.

Also drop the stack_table = NULL assignment from disable_stack_depot, as
stack_table is NULL by default.

Link: https://lkml.kernel.org/r/cover.1700502145.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/73a25c5fff29f3357cd7a9330e85e09bc8da2cbe.1700502145.git.andreyknvl@google.com
Fixes: e1fdc403349c ("lib: stackdepot: add support to disable stack depot")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmemleak: add checksum to backtrace report

Change /sys/kernel/debug/kmemleak report format slightly, adding
"(extra info)" to the backtrace header:

from: "  backtrace:"
to:   "  backtrace (crc <cksum>):"

The <cksum> allows a user to see recurring backtraces without
detailed/careful reading of multiline stacks.  So after cycling
kmemleak-test a few times, I know some leaks are repeating.

  bash-5.2# grep backtrace /sys/kernel/debug/kmemleak | wc
     62     186    1792
  bash-5.2# grep backtrace /sys/kernel/debug/kmemleak | sort -u | wc
     37     111    1067

syzkaller parses kmemleak for "unreferenced object" only, so is
unaffected by this change.  Other github repos are moribund.

Link: https://lkml.kernel.org/r/20231116224318.124209-3-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmemleak: drop (age <increasing>) from leak record

Patch series "tweak kmemleak report format".

These 2 patches make minor changes to the report:

1st strips "age <increasing>" from output.  This makes the output
idempotent; unchanging until a new leak is reported.

2nd adds the backtrace.checksum to the "backtrace:" line.  This lets a
user see repeats without actually reading the whole backtrace.  So now
the backtrace line looks like this:

  backtrace (crc 603070071):

I surveyed for un-wanted effects upon users:

Syzkaller parses kmemleak in executor/common_linux.h:
static void check_leaks(char** frames, int nframes)

It just counts occurrences of "unreferenced object", specifically it
does not look for "age", nor would it choke on "crc" being added.

github has 3 repos with "kmemleak" mentioned, all are moribund.
gitlab has 0 hits on "kmemleak".

This patch (of 2):

Displaying age is pretty, but counter-productive; it changes with
current-time, so it surrenders idempotency of the output, which breaks
simple hash-based cataloging of the records by the user.

The trouble: sequential reads, wo new leaks, get new results:

  :#> sum /sys/kernel/debug/kmemleak
  53439    74 /sys/kernel/debug/kmemleak
  :#> sum /sys/kernel/debug/kmemleak
  59066    74 /sys/kernel/debug/kmemleak

and age is why (nothing else changes):

  :#> grep -v age /sys/kernel/debug/kmemleak | sum
  58894    67
  :#> grep -v age /sys/kernel/debug/kmemleak | sum
  58894    67

Since jiffies is already printed in the "comm" line, age adds nothing.

Notably, syzkaller reads kmemleak only for "unreferenced object", and
won't care about this reform of age-ism.  A few moribund github repos
mention it, but don't compile.

Link: https://lkml.kernel.org/r/20231116224318.124209-1-jim.cromie@gmail.com
Link: https://lkml.kernel.org/r/20231116224318.124209-2-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: convert error_remove_page to error_remove_folio

There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.

Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: convert truncate_error_page to truncate_error_folio

Both callers now have a folio, so pass it in.  Nothing downstream was
expecting a tail page; that's asserted in generic_error_remove_page(), for
example.

Link: https://lkml.kernel.org/r/20231117161447.2461643-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: use a folio in me_huge_page()

This function was already explicitly calling compound_head();
unfortunately the compiler can't know that and elide the redundant calls
to compound_head() buried in page_mapping(), unlock_page(), etc.  Switch
to using a folio, which does let us elide these calls.

Link: https://lkml.kernel.org/r/20231117161447.2461643-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: convert delete_from_lru_cache() to take a folio

All three callers now have a folio; pass it in instead of the page.
Saves five calls to compound_head().

Link: https://lkml.kernel.org/r/20231117161447.2461643-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: use a folio in me_pagecache_dirty()

Replaces three hidden calls to compound_head() with one visible one.

Link: https://lkml.kernel.org/r/20231117161447.2461643-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: use a folio in me_pagecache_clean()

Patch series "Convert aops->error_remove_page to ->error_remove_folio".

This is a memory-failure patch series which converts a lot of uses of page
APIs into folio APIs with the usual benefits.

This patch (of 6):

Replaces three hidden calls to compound_head() with one visible one.
Fix up a few comments while I'm modifying this function.

Link: https://lkml.kernel.org/r/20231117161447.2461643-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231117161447.2461643-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: tweak writeback config help

Writeback is for incompressible and idle zram pages.

Link: https://lkml.kernel.org/r/20231115024223.4133148-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: split memory-tracking and ac-time tracking

ZRAM_MEMORY_TRACKING enables two features:
- per-entry ac-time tracking
- debugfs interface

The latter one is the reason why memory-tracking depends on DEBUG_FS,
while the former one is used far beyond debugging these days.  Namely
ac-time is used for fine grained writeback of idle entries (pages).

Move ac-time tracking under its own config option so that it can be
enabled (along with writeback) on systems without DEBUG_FS.

[senozhatsky@chromium.org: ifdef fixup, per Dmytro]
Link: https://lkml.kernel.org/r/20231117013543.540280-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20231115024223.4133148-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_owner: record and dump free_pid and free_tgid

While investigating some complex memory allocation and free bugs
especially in multi-processes and multi-threads cases, from time to time,
I feel the free stack isn't sufficient as a page can be freed by processes
or threads other than the one allocating it.  And other processes and
threads which free the page often have the exactly same free stack with
the one allocating the page.  We can't know who free the page only through
the free stack though the current page_owner does tell us the pid and tgid
of the one allocating the page.  This makes the bug investigation often
hard.

So this patch adds free pid and tgid in page_owner, so that we can easily
figure out if the freeing is crossing processes or threads.

Link: https://lkml.kernel.org/r/20231114034202.73098-1-v-songbaohua@oppo.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Cc: Audra Mitchell <audra@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kassey Li <quic_yingangl@quicinc.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Documentation/mm: drop pte_bad() descriptions from arch page table helpers

pte_bad() never existed unlike similar helpers at PMU, PUD, and PGD level.
This was added erroneously and hence should be dropped instead.

Link: https://lkml.kernel.org/r/20231114063456.339652-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: default to inline instrumentation

KASan inline instrumentation can yield up to a 2x performance gain at the
cost of a larger binary.

Make inline instrumentation the default, as suggested in the bug report
below.

When an architecture does not support inline instrumentation, it should
set ARCH_DISABLE_KASAN_INLINE, as done by PowerPC, for instance.

Link: https://lkml.kernel.org/r/20231109155101.186028-1-paul.heidekrueger@tum.de
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@tum.de>
Reported-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=203495
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: fix process_vm_rw page counts

1. There is a "-1" missing in the page number calculation in
   process_vm_rw_core.  While this can't break anything, it can cause
   unnecessary allocations in certain cases:

   Consider handling an iovec ranging over PVM_MAX_PP_ARRAY_COUNT pages
   that is also aligned to a page boundary.  While pp_stack could hold
   references to such an amount of pinned pages, nr_pages yields
   (PVM_MAX_PP_ARRAY + 1) in process_vm_rw_core.  Consequently, a larger
   buffer is allocated with kmalloc for no reason.

   For any page boundary aligned iovec that is a multiple of PAGE_SIZE
   and larger than PVM_MAX_PP_ARRAY_COUNT pages, nr_pages will be too big
   by 1 and thus kmalloc allocates excess space for one more pointer.

2. max_pages_per_loop is constant and there is no reason to have it as
   a variable.  A macro does the job just fine and saves memory.

3. Replaced "sizeof(struct pages *)" with "sizeof(struct page *)" to
   have matching types for allocation and prevent confusion.

Link: https://lkml.kernel.org/r/20231111184859.44264-1-yjnworkstation@gmail.com
Signed-off-by: York Jasper Niebuhr <yjnworkstation@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mmap: remove the IA64-specific vma expansion implementation

With commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"),
there is no need to keep the IA64-specific vma expansion.

Clean up the IA64-specific vma expansion implementation.

Link: https://lkml.kernel.org/r/20231113124728.3974-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

gfp: include __GFP_NOWARN in GFP_NOWAIT

GFP_NOWAIT callers are always prepared for their allocations to fail
because they fail so frequently.  Forcing the callers to remember to add
__GFP_NOWARN is just annoying and leads to an endless stream of patches
for the places where we forgot to add it.

We can now remove __GFP_NOWARN from all the callers which specify
GFP_NOWAIT, but I'd rather wait a cycle and send patches to each
maintainer instead of creating a big pile of merge conflicts.

Link: https://lkml.kernel.org/r/20231109211507.2262419-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: dedupe some memcg uncharging logic

The duplication makes it seem like some work is required before uncharging
in the !PageHWPoison case.  But it isn't, so we can simplify the code a
little.

Note the PageMemcgKmem check is redundant, but I've left it in as it
avoids an unnecessary function call.

Link: https://lkml.kernel.org/r/20231108164920.3401565-1-jackmanb@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove invalidate_inode_page()

All callers are now converted to call mapping_evict_folio().

Link: https://lkml.kernel.org/r/20231108182809.602073-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: convert isolate_page() to mf_isolate_folio()

The only caller now has a folio, so pass it in and operate on it.  Saves
many page->folio conversions and introduces only one folio->page
conversion when calling isolate_movable_page().

Link: https://lkml.kernel.org/r/20231108182809.602073-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: convert soft_offline_in_use_page() to use a folio

Replace the existing head-page logic with folio logic.

Link: https://lkml.kernel.org/r/20231108182809.602073-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: use mapping_evict_folio() in truncate_error_page()

We already have the folio and the mapping, so replace the call to
invalidate_inode_page() with mapping_evict_folio().

Link: https://lkml.kernel.org/r/20231108182809.602073-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: convert __do_fault() to use a folio

Convert vmf->page to a folio as soon as we're going to use it.  This fixes
a bug if the fault handler returns a tail page with hardware poison; tail
pages have an invalid page->index, so we would fail to unmap the page from
the page tables.  We actually have to unmap the entire folio (or
mapping_evict_folio() will fail), so use unmap_mapping_folio() instead.

This also saves various calls to compound_head() hidden in lock_page(),
put_page(), etc.

Link: https://lkml.kernel.org/r/20231108182809.602073-3-willy@infradead.org
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: make mapping_evict_folio() the preferred way to evict clean folios

Patch series "Fix fault handler's handling of poisoned tail pages".

Since introducing the ability to have large folios in the page cache, it's
been possible to have a hwpoisoned tail page returned from the fault
handler.  We handle this situation poorly; failing to remove the affected
page from use.

This isn't a minimal patch to fix it, it's a full conversion of all the
code surrounding it.

This patch (of 6):

invalidate_inode_page() does very little beyond calling
mapping_evict_folio().  Move the check for mapping being NULL into
mapping_evict_folio() and make it available to the rest of the MM for use
in the next few patches.

Link: https://lkml.kernel.org/r/20231108182809.602073-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231108182809.602073-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: return void from folio_start_writeback() and related functions

Nobody now checks the return value from any of these functions, so
add an assertion at the beginning of the function and return void.

Link: https://lkml.kernel.org/r/20231108204605.745109-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>